Search Results

Search found 1565 results on 63 pages for 'ati mobility radeon'.

Page 53/63 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• How to revert back to older xorg?

  - by wouter205

  Since the last update of ubuntu 12.04, the system won't boot into gui anymore. It states that it was unable to load the graphics drivers and gives me 4 options, these are: run in low graphics mode for 1 session reconfigure graphics troubleshoot the error exit to console login whichever option I choose, it doesn't solve anything. For instance, when i choose to reconfigure graphics and then switch to vesa drivers, the screen goes back to the option list. So i configured xorg.conf to vesa myself, and i see in the update history that ubuntu updated xserver-xorg-core and xserver-common whereas i blocked these updates in synaptic since i'm aware that updating these files caused troubles with my particular video card (radeon hd6800). So my solution is probably to revert these files to the older (working) versions. How can I do this please (in particular xserver-xorg-core since i think this is the main cause of my problem). thanks! output of ls /etc/X11 -app-defaults xorg.conf Xreset -cursors xorg.conf-backup-120529144709 Xreset.d -default-display-manager xorg.conf.fglrx-0 -Xresources -fonts xorg.conf.fglrx-1 Xsession -rgb.txt xorg.conf.fglrx-2 Xsession.d -X xorg.conf.original-0 -Xsession.options -xinit xorg.conf.original-1 -Xwrapper.config -xkb xorg.conf.vesa Output of sudo aptitude show xserver-xorg-core | grep Versie (read: Version in Flemish) Versie: 2:1.11.4-0ubuntu10.2

  Read the article

• Upgrade from 11.04 to 12.04 failed - unable to login

  - by Tobias M.

  Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

  Read the article

• Google Chrome not rendering webpages correctly

  - by sumit_gt

  I am facing some serious web page rendering issues with Chrome. It is more prominent during javascript based animations and stuff on websites like youtube. I have tried removing chrome using (sudo apt-get purge google-chrome-stable) and then reinstalling it. But the problems still persist. The same webpages work correctly on firefox on ubuntu and chrome on windows. The problem only shows up when I use chrome on ubuntu. I think the issue has started after I updated to the latest version of Chrome. I have used Chrome previously on this machine without any problems. I have attached a image that demonstrates the issue. What could possibly be the problem? PS: here's the output of lshw -c video: *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff Here's the output of lspci -nn: output of lspci -nn

  Read the article

• 12.04 kernel panic

  - by jesus

  Hello I'm having trouble with Ubuntu 12.04. I downloaded the ISO and burned it into a CD and tried to install Ubuntu, but during the installation process, I got this message Kernel panic-not syncing Attempted to kill init! pid:1,comm:init not tainted 3.2.0-23-generic-pae#36-ubunru then it says switching to console text, and it just hangs in there and nothing happens. I burned another CD with Ubuntu 10.04, but I get a different problem: Ubuntu just gets stuck at the splash screen with the 5 dots which move from red to white, and nothing happens. I was able to boot before with 10.04 but I recently upgraded my computer graphics card and power supply. please see my system specs. Gigabyte GA-M68M-S2P (rev. 2.3) GeForce 7025 Chipset Athalon II x4 640 QuadCore Radeon HD 6870 sapphire OCZ ModXStream Pro 600W Modular High Performance Power Supply 3 hard drives one is IDE and the other two SATA IDE DVD Drive If any one could help me, I'd be most appreciative. If it helps I tried the F6 option like acpi=off noapic nolapic nomodset but i still get kernel panic

  Read the article

• Restart problem after installing graphical card driver

  - by Tim

  My laptop is Lenovo T400, running Ubuntu 10.10. My problem: I just run jockey-gtk and installed ATI/AMD proprietary FGLRX graphics driver. But after reboot, there is a short period of graphical "Ubuntu" and then instead of starting X-window it completely changed to command line to ask me to login. Even after login and then issuing xinit, it still failed to start X. To solve this problem: I followed this post, where one person suggested to you can simply write sudo apt-get remove fglrx This worked for me. If it doesn't work, then try sudo apt-get remove xorg-driver-fglrx and restart. I actually don't need the driver anyway, so I issued the first command after login under command line. But after reboot, the situation is even worse, and there is now even no command-line interface to ask me login, instead the screen is completely blank with just some ambient light in the background and Ubuntu is hanging there probably forever. So I have no chance to try the second command the person suggested. I was wondering what I can do now to solve my problem? Thanks and regards!

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• Slow boot on Ubuntu 12.04, probable cause the network connection

  - by Ravi S Ghosh

  I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

  Read the article

• HP Notebook Pavilion g6-2101sl freeze

  - by StErMi

  I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

  Read the article

• HP Envy 15 3040nr sound issues

  - by Lenny

  I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

  Read the article

• Grub menu will not show the first time I try to boot my ubuntu server 12.04 after it is shutdown for a long time

  - by user211477

  I am running into a booting issue after installing Ubuntu Server 12.04 LTS. Following is the symptom of the problem. SYSTEM DESCRIPTION: Dual core AMD Athlon 64 3 Disks: two SATA (out of which one is SSD) and one PATA. Using LVM for disk partition management. /boot is not under LVM rest of the partitions are. / is on the SSD BIOS boot sequence is correct and points to the disk with /boot and boot loader is installed on this disk. SYMPTOMS: POST messages Blinking cursor on first line then moves to second line Screen flickers then becomes black Everything is unresponsive, hard reboot POST messages will not show up on screen. Monitor displays powersave message Force shutdown machine again. Shutoff power to machine for a few minutes. Restart machine. POST message show up. Grub menu shows up Ubuntu server 12.04 boots normally. From now on Ubuntu server boots normally until machine is shutdown for a long time (for example, 30 mins) Repeat steps 1 through 13 once the machine is started after a long time. WHAT DID I TRY? I read several posts and have tried: radeon.modeset=0 setting the gfxmode edd=0 nolacpi boot-repair Nothing seems to work. In my search I did see only one post with this same symptom. Unfortunately, I am not being able to locate that post anymore. The interesting fact is that with this same machine configuration, if I install Ubuntu Desktop 12.04 then everything works fine. Any help will be appreciated.

  Read the article

• Ubuntu purple splash screen with blinking pixels?

  - by joxnas

  I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot). Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time) After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem) Well, I already installed the graphic drivers (going to system admnistration hardware drivers). But it didn't solve anything. (I don't know if it is even related) I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. http://ubuntuforums.org/archive/index.php/t-294692.html But couldn't understand the conversation (i'm a linux novice) Sorry for my horrible english.. I would appreciate any help! My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core 2 Duo

  Read the article

• MPlayer does not work

  - by Soham Pal

  Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

  Read the article

• Can't install Ubuntu, black screen after install

  - by Tyrone

  I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

  Read the article

• wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

  - by s1lv3r

  I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

  Read the article

• Accessing second hard drive

  - by Jonathan

  Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

  Read the article

• lm-sensor and cpu temperatures

  - by nalsanj

  i am on ubuntu Precise Pangolin. The processor is Intel i3. a desktop. i installed lm-sensors and below is the report "sensors" gave coretemp-isa-0000 Adapter: ISA adapter Core 0: +30.0°C (high = +89.0°C, crit = +105.0°C) Core 2: +33.0°C (high = +89.0°C, crit = +105.0°C) w83627dhg-isa-0a10 Adapter: ISA adapter Vcore: +0.93 V (min = +0.00 V, max = +1.74 V) in1: +0.75 V (min = +1.99 V, max = +1.99 V) ALARM AVCC: +3.36 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.36 V (min = +2.98 V, max = +3.63 V) in4: +1.30 V (min = +0.90 V, max = +1.77 V) in5: +0.76 V (min = +1.15 V, max = +0.90 V) ALARM in6: +1.06 V (min = +0.94 V, max = +2.03 V) 3VSB: +3.36 V (min = +2.98 V, max = +3.63 V) Vbat: +3.36 V (min = +2.70 V, max = +3.30 V) ALARM fan1: 0 RPM (min = 3515 RPM, div = 128) ALARM fan2: 0 RPM (min = 10546 RPM, div = 128) ALARM fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +39.0°C (high = -121.0°C, hyst = +9.0°C) ALARM sensor = diode temp2: +39.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor cpu0_vid: +2.050 V intrusion0: OK radeon-pci-0100 Adapter: PCI adapter temp1: +70.5°C The fans sensors are detecting 0 RPM and some temperatures are out of range - the ALARMs above but i dont understand it very well. Can someone help out?

  Read the article

• Windows 7 BSOD when changing power plan

  - by dd5

  i have a strange problem. When i want to change the power plan on my laptop from High performance to Balanced, Windows freezes and i get bsod. The power plan settings are all default. Laptop specs: - Intel Core i3 330M/350M - Intel® HM55 Express Chipset - DDR3 1066 MHz SDRAM 8GB - ATI Mobility™ Radeon HD5730 1GB DDR3 VRAM - Intel SSD330 128gb - Windows 7 Home premium I've searched the internets but couldnt find a similar issue. BSOD first started when i installed this SSD and stopped when i've updated the chipset controller driver then started again yesterday when i wanted to change the power settings plan.Minidump file here. Any help with this weird issue appriciated, thanks. Edit: - i've ran Memory diagnostic tool, - Intel SSD diagnostics - and updated the firmware to 3.2.1. Non of these steps worked or shown signs of errors - but still got BSOD when changing power plan settings. After analizing the dump file via osronline.com here a first few lines: CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated. Several processes and threads are necessary for the operation of the system; when they are terminated (for any reason), the system can no longer function. Arguments: Arg1: 0000000000000003, Process Arg2: fffffa8008661b30, Terminating object Arg3: fffffa8008661e10, Process image file name Arg4: fffff800033de270, Explanatory message (ascii) -- Solution -- Provided by Vinayak: After installing the Intel Rapid storage Technology from MajorGeeks, i didn't experience a BSOD since, thank you :)

  Read the article

• Touchpad right click doesn't work on HP Envy 14 beats

  - by jdrageme01

  I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• Dual monitor setup can cause boot problem?

  - by kriszpontaz

  I have a two monitor setup, one 22" (1680x1050 res., 16:10) and another 19" (1280x1024 res. 5:4). I've installed ubuntu 11.10 beta2 x86, and the installation worked fine, the system boot was successful. I've upgraded ubuntu from the main server, and after restart, booting with the kernel 3.0.0-13, my system hangs up with a purple screen, and than nothing happens (the system boots successful with the kernel image 3.0.0-8). Nvidia current drivers not installed, but if i install it, the situation is the same. I have an Nvidia 9600GT installed. I tried to boot with one screen attached, I've tried each port, but no luck at all. With kernel image 3.0.0-8 the system successfully boots with each display attached, but the farther kernels (3.0.0-11; 3.0.0-12; ect.) all freezes, even one display, or multiple attached. I have two systems with ubuntu installed, and the other (with Ati HD 2400XT, latest closed drivers) don't have any issues like this, I wrote about. Update: The problem solved by reinstalling the operatin system, without automatically installing updates during install, with only one monitor attached. After completing installation, and clean reboot, i've installed closed nVidia drivers. After all, i found it's safe to connect another monitor to the system, it's not causing any problems. Probably the situation stays like this.

  Read the article

• Ubuntu 12.04 Freezes at Bootup

  - by Ryan Yu

  I have an Acer Aspire One Model AO722, that has a dual-boot configuration with Windows 7 Home Premium and Ubuntu 12.04. Processor: AMD C-50, 1.00GHz 2.00GB ram, 64-bit, AMD Radeon HD 6250 Graphics. I installed Ubuntu two days ago, and since then, loading it has been sporadic. Windows 7 still loads just fine, but Ubuntu will sometimes freeze. First time I booted Ubuntu up, it ran no problem. Worked with it for half an hour, then shut down the computer. The second time I booted it up, it froze after ten minutes when I was trying to set up Thunderbird. Third time, same thing. Fourth time, it froze about 5 minutes after bootup when I was trying to connect to my wifi. Fifth time, it ran no problems for about 5~ hours. Then, three consecutive times I've restarted (what is it, the 6th, 7th, and 8th times?) it has gotten to the login screen, I've entered my password, all the text on the page disappears as if its going to load my desktop, and it freezes. A minute ago when I booted Ubuntu up for the 9th time, it loaded the desktop fine. Who knows if it'll crash soon; probably, though. Any ideas?

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• Why would video stutter on HDMI but not on DVI?

  - by CorvT

  I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

  Read the article

• Automatically revert to laptop screen when external monitor unplugged

  - by Ryan

  I regularly use an external monitor with my laptop, so when I use it, I usually have the laptop screen disabled when the monitor is connected, and this seems to cause problems when the monitor is disconnected. If the monitor is connected while the laptop screen is disabled, I can't get the X session to show up at all: I can Ctrl+Alt+F1 to open a terminal, and that works fine.. ..but Ctrl+Alt+F7 does nothing. The display is blank, and stays blank. The same thing happens whether I put the computer to sleep with the monitor connected, or if I disconnect while the computer is still awake. Rebooting the computer fixes the issue, as does killing Xorg and starting it again, but both of those are sub-optimal since I lose my current session. I'm currently using the open source graphics driver (xserver-xorg-video-ati). This question looks like it might answer my question, but unfortunately hwinfo is no longer available in the apt repository. Is there a way with current tools to automatically detect when the external monitor is disconnected and switch to the laptop display?

  Read the article

• Logitech C510 HD Webcam related question

  - by Ashfame

  I am going to buy Logitech C510 HD webcam and I just checked on other questions here on AskUbuntu that it works out of the box with cheese. My question is can it be limited in any functionality that I would like to do with it? I would like it to be used with everything - Skype, Gtalk video chat, Facebook, Youtube etc I would like the ability to record or do a video call in lesser resolution video (its a 720p one). Also since I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? Anything else that I should consider? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >