Search Results

Search found 1751 results on 71 pages for 'builds'.

Page 53/71 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• moving audio over a local network using GStreamer

  - by James Turner

  I need to move realtime audio between two Linux machines, which are both running custom software (of mine) which builds on top of Gstreamer. (The software already has other communication between the machines, over a separate TCP-based protocol - I mention this in case having reliable out-of-band data makes a difference to the solution). The audio input will be a microphone / line-in on the sending machine, and normal audio output as the sink on the destination; alsasrc and alsasink are the most likely, though for testing I have been using the audiotestsrc instead of a real microphone. GStreamer offers a multitude of ways to move data round over networks - RTP, RTSP, GDP payloading, UDP and TCP servers, clients and sockets, and so on. There's also many examples on the web of streaming both audio and video - but none of them seem to work for me, in practice; either the destination pipeline fails to negotiate caps, or I hear a single packet and then the pipeline stalls, or the destination pipeline bails out immediately with no data available. In all cases, I'm testing on the command-line just gst-launch. No compression of the audio data is required - raw audio, or trivial WAV, uLaw or aLaw encoding is fine; what's more important is low-ish latency.

  Read the article

• Data Access Layer, Best Practices

  - by labratmatt

  I'm looking for input on the best way to refactor the data access layer (DAL) in my PHP based web app. I follow an MVC pattern: PHP/HTML/CSS/etc. views on the front end, PHP controllers/services in the middle, and a PHP DAL sitting on top of a relational database in the model. Pretty standard stuff. Things are working fine, but my DAL is getting large (codesmell?) and becoming a bit unwieldy. My DAL contains almost all of the logic to interface with my database and is full of functions that look like this: function getUser($user_id) { $statement = "select id, name from users where user_id=:user_id"; PDO builds statement and fetchs results as an array return $array_of_results_generated_by_PDO_fetch_method; } Notes: The logic in my controller only interacts with the model using functions like the above in the DAL I am not using a framework (I'm of the opinion that PHP is a templating language and there's no need to inject complexity via a framework) I generally use PHP as a procedural language and tend to shy away from its OOP approach (I enjoy OOP development but prefer to keep that complexity out of PHP) What approaches have you taken when your DAL has reached this point? Do I have a fundamental design problem? Do I simply need to chop my DAL into a number of smaller files (logically divide it)? Thanks.

  Read the article

• Python minidom and UTF-8 encoded XML with hash references

  - by Jakob Simon-Gaarde

  Hi I am experiencing some difficulty in my home project where I need to parse a SOAP request. The SOAP is generated with gSOAP and involves string parameters with special characters like the danish letters "æøå". gSOAP builds SOAP requests with UTF-8 encoding by default, but instead of sending the special chatacters in raw format (ie. bytes C3A6 for the special character "æ") it sends what I think is called character hash references (ie. &#195;&#166;). I don't completely understand why gSOAP does it this way as I can see that it has marked the incomming payload as being UTF-8 encoded anyway (Content-Type: text/xml; charset=utf-8), but this is besides the question (I think). Anyway I guess gSOAP probably is obeying transport rules, or what? When I parse the request from gSOAP in python with xml.dom.minidom.parseString() I get element values as unicode objects which is fine, but the character hash references are not decoded as UTF-8 character codes. It unescapes the character hash references, but does not decode the string afterwards. In the end I have a unicode string object with UTF-8 encoding: So if the string "æble" is contained in the XML, it comes like this in the request: "&#195;&#166;ble" After parsing the XML the unicode string in the DOM Text Node's data member looks like this: u'\xc3\xa6ble' I would expect it to look like this: u'\xe6ble' What am I doing wrong? Should I unescape the SOAP XML before parsing it, or is it somewhere else I should be looking for the solution, maybe gSOAP? Thanks in advance. Best regards Jakob Simon-Gaarde

  Read the article

• Qt moc failure without an error message

  - by Robert Parker

  So I'm pretty new to Qt, and I've just inherited a project from someone else who is also new to Qt. He isn't around this week btw. We are using Visual Studio 2008, and have the latest version of Qt installed(4.6.2). The project builds on my coworker's machine fine, and I can get the project from svn and build it directly. But under any other circumstances it refuses to build on my machine, and it doesn't give me much of an explanation why. Even if I just do a 'build clean' and then a 'build' it doesn't work. Any slight modification will make it fail. When I try to build the entire project I get the error message: 1Moc'ing MatrixTypeInterface.h... 1moc: Cannot create .\GeneratedFiles\Debug\moc_MatrixTypeInterface.cpp;.\GeneratedFiles\Debug\moc_matrixtypeinterface.cpp 1Project : error PRJ0019: A tool returned an error code from "Moc'ing MatrixTypeInterface.h..." The moc tool doesn't give any sort of error message as to why it isn't working, and I wasted most of yesterday trying to figure out why. I got the command that VS was using to call moc, and I entered in the command line myself. It didn't write anything to the screen. Any ideas?

  Read the article

• Generic unit test scheduling

  - by Raphink

  Hello, I'm (re)writing a program that does generic unit test scheduling. The current program is a mono-threaded Perl program, but I'm willing to modularize it and parallelize the tests. I'm also considering rewriting it in Python. Here is what I need to do: I have a list of tests, with the following attributes: uri: a URI to test (could be HTTP/HTTPS/SSH/local) ; depends: an associative array of tests/values that this test depends on ; join: a list of DB joints to be added when selecting items to process in this test ; depends_db: additional conditions to add to the DB request when selecting items to process in this test. The program builds a dependency tree, beginning with the tests that have no dependencies ; for each test: a list of items is selected from the database using the conditions (results of depending tests, joints and depends_db) ; the list of items is sent to the URI (using POST or stdin) ; the result is retrived as a YAML file listing the state and comments for the test for each tested item ; the results are stored in the DB ; the test returns, allowing depending tests to be performed. the program generates reports (CSV, DB, graphviz) of the performed tests. The primary use of this program currently is to test a fleet of machines against services such as backup, DNS, etc. The tests can then be: - backup: hosted on the backup machine(s), called through HTTP, checks if the machines' backup went well ; - DNS: hosted on the local machine, called via stdin, checks if the machines' fqdn have a valid DNS entry. Does such a tool/module already exist? What would be the best implementation to achieve this (using Perl or Python)?

  Read the article

• Installing ImageMagick extension with php/windows

  - by Jason

  Running PHP Version 5.2.5 on Windows Server 2003 with IIS. Have virtually an identical server where we were able to install ImageMagick with no issues. It's running exactly the same version of php. Used the following steps to install, but it just won't seem to work on this server. ImageMagick itself is installed but php won't load the extension. We've spent hours trying to get the extension installed. It just won't show up in phpinfo(). INSTALL STEPS TAKEN* To install IMagick on windows xp (php 5.2.x) 1.) download and install ImageMagick-6.5.8-7 Q16-windows-dll.exe http://www.imagemagick.org/download/binaries/ ImageMagick-6.5.8-7-Q16-windows-dll.exe 2.) download php_imagick_dyn-Q16.dll from: http://valokuva.org/outside-blog-content/ imagick-windows-builds/080709/ copy dll to [PHP]/extension dir and rename it to php_imagick.dll 3.) You have to edit your php.ini file and add new extension "extension=php_imagick.dll" 4.) Save ini file and restart apache server. (If necessary, restart your windows) 5.) phpinfo() should show imagick enabled.

  Read the article

• Documentation and Build system for Mono/C#

  - by dcolish

  I'm starting out on a new project and a team member has decided to use C# as the implementation language. I don't have a lot of experience in C#, but a brief reading shows that it's very capable of being a complete cross-platform vm. Beyond the language, I've been having trouble selecting tools and workflows for managing the code as the project grows. It should be fairly small (<10K lines) but I would like to have the ability to generate documentation as the project grows, manage any external dependencies that we decide to use, and automate builds and testing. I am wondering what tools are commonly used or considered best practices for this language. I am mainly concerned with how would a build system potentially work on *nix as well as windows? Are there C# specific tools or is Make more common? In addition, I'd like to use a dvcs, but it doesn't look like Visual Studio and MonoDevelop support the same ones. What's the common vcs of choice for C#? For testing sort of Unit testing is available for C#/Mono? Finally, I know that there are good doc generators, but with the question of the build system, I would really like to have that just be a single step in the build similar to how testing is a step. Normally I'd automate with Hudson, but I am wondering if there is something more specific to the platform. Overall, I'd love to see a solution that provides a decent workflow on both windows and *nix without a heavy admin burden. I am pretty sure this is the holy grail of project management, so anything that puts me on that path is awesome.

  Read the article

• Do overlays work correctly in Emacs for Windows?

  - by Cheeso

  I'm using Flymake on C# code, emacs v22.2.1 on Windows. The Flymake stuff has been working well for me. For those who don't know, you can read an overview of flymake, but the quick story is that flymake repeatedly builds the source file you are currently working on in the background, for the purpose of doing syntax checking. It then highlights the compiler warnings and erros in the current buffer. Flymake didn't work for C# initially, but I "monkey-patched it" and it works nicely now. If you edit C# in emacs, I highly recommend using flymake. The only problem I have is with the UI. Flymake highlights the errors and warnings nicely, and then inserts "overlays" with the full error or warning text. IF I hover the mouse pointer over the highlighted line in code, the overlay pops up. But as you can see, the overlay is truncated, and it doesn't display correctly. Flymake seems to be doing the right thing, it's the overlay part that seems broken. Do overlays work correctly in emacs for Windows? Where do I look to fix this?

  Read the article

• future-proofing java version check in ant script

  - by carneades

  The script provided here gave a great way to check if Ant is using Java 6. <?xml version="1.0" encoding="UTF-8"?> <project name="project" default="default"> <target name="default" depends="javaCheck" if="isJava6"> <echo message="Hello, World!" /> </target> <target name="javaCheck"> <echo message="ant.java.version=${ant.java.version}" /> <condition property="isJava6"> <equals arg1="${ant.java.version}" arg2="1.6" /> </condition> </target> </project> However, I have good reason to think the next person holding my position may not be a Java programmer and I want to make sure the builds don't fail because of Java 7. Is there any way to pick apart a String or otherwise ask for Java 6 or higher?

  Read the article

• How do I correctly modify a custom cocoa framework?

  - by Septih

  Hello, I'm working with the very-useful ID3 framework in my cocoa project. There's one tiny thing I'd like to modify in it, but I can't seem to get the changes I've made to apply to the built framework. The source code provided with the framework comes with an Xcode project, so I've opened that up and for testings sake put an NSLog(@"hello"); in. It's definetly in a place where it will be called and there are other NSLog() calls in the framework that show up so it's not just console output being supressed. To build the framework once modified I've first cleaned the build folder, made sure that it's actually removed the files, and then built it. Then in the Xcode project I'm using the framework in, I've deleted the old reference and added a new one to the framework that's freshly built. Running my project with the newly build framework doesn't call the modified framework code. I've tried with both the Development and Deployment builds that are part of the framework Xcode project. My gut instinct is that the executable that the framework code is compiled into is being cached somehow. But as I'm fairly unfamiliar with the workings of frameworks, I'm not really sure where to look.

  Read the article

• Simulating O_NOFOLLOW (2): Is this other approach safe?

  - by Daniel Trebbien

  As a follow-up question to this one, I thought of another approach which builds off of @caf's answer for the case where I want to append to file name and create it if it does not exist. Here is what I came up with: Create a temporary directory with mode 0700 in a system temporary directory on the same filesystem as file name. Create an empty, temporary, regular file (temp_name) in the temporary directory (only serves as placeholder). Open file name for reading only, just to create it if it does not exist. The OS may follow name if it is a symbolic link; I don't care at this point. Make a hard link to name at temp_name (overwriting the placeholder file). If the link call fails, then exit. (Maybe someone has come along and removed the file at name, who knows?) Use lstat on temp_name (now a hard link). If S_ISLNK(lst.st_mode), then exit. open temp_name for writing, append (O_WRONLY | O_APPEND). Write everything out. Close the file descriptor. unlink the hard link. Remove the temporary directory. (All of this, by the way, is for an open source project that I am working on. You can view the source of my implementation of this approach here.) Is this procedure safe against symbolic link attacks? For example, is it possible for a malicious process to ensure that the inode for name represents a regular file for the duration of the lstat check, then make the inode a symbolic link with the temp_name hard link now pointing to the new, symbolic link? I am assuming that a malicious process cannot affect temp_name.

  Read the article

• SQL Server lock/hang issue

  - by mattwoberts

  Hi, I'm using SQL Server 2008 on Windows Server 2008 R2, all sp'd up. I'm getting occasional issues with SQL Server hanging with the CPU usage on 100% on our live server. It seems all the wait time on SQL Sever when this happens is given to SOS_SCHEDULER_YIELD. Here is the Stored Proc that causes the hang. I've added the "WITH (NOLOCK)" in an attempt to fix what seems to be a locking issue. ALTER PROCEDURE [dbo].[MostPopularRead] AS BEGIN SET NOCOUNT ON; SELECT c.ForeignId , ct.ContentSource as ContentSource , sum(ch.HitCount * hw.Weight) as Popularity , (sum(ch.HitCount * hw.Weight) * 100) / @Total as Percent , @Total as TotalHits from ContentHit ch WITH (NOLOCK) join [Content] c WITH (NOLOCK) on ch.ContentId = c.ContentId join HitWeight hw WITH (NOLOCK) on ch.HitWeightId = hw.HitWeightId join ContentType ct WITH (NOLOCK) on c.ContentTypeId = ct.ContentTypeId where ch.CreatedDate between @Then and @Now group by c.ForeignId , ct.ContentSource order by sum(ch.HitCount * hw.HitWeightMultiplier) desc END The stored proc reads from the table "ContentHit", which is a table that tracks when content on the site is clicked (it gets hit quite frequently - anything from 4 to 20 hits a minute). So its pretty clear that this table is the source of the problem. There is a stored proc that is called to add hit tracks to the ContentHit table, its pretty trivial, it just builds up a string from the params passed in, which involves a few selects from some lookup tables, followed by the main insert: BEGIN TRAN insert into [ContentHit] (ContentId, HitCount, HitWeightId, ContentHitComment) values (@ContentId, isnull(@HitCount,1), isnull(@HitWeightId,1), @ContentHitComment) COMMIT TRAN The ContentHit table has a clustered index on its ID column, and I've added another index on CreatedDate since that is used in the select. When I profile the issue, I see the Stored proc executes for exactly 30 seconds, then the SQL timeout exception occurs. If it makes a difference the web application using it is ASP.NET, and I'm using Subsonic (3) to execute these stored procs. Can someone please advise how best I can solve this problem? I don't care about reading dirty data... Thanks

  Read the article

• WCF done broke.

  - by SteveCav

  WCF is completely fouled up on my machine. I start a new sln in VS2008. Add a project (WCF Service Lib).Build the project (builds ok). debug the project -- it gets halfway through the progress bar and bombs out with the error below (real path changed to "my mex path" so codeproject doesn't think its spam). I'm assuming it's file permissions but don't know where to start. Any ideas?: Error: Cannot obtain Metadata from my mex path If this is a Windows (R) Communication Foundation service to which you have access, please check that you have enabled metadata publishing at the specified address. For help enabling metadata publishing, please refer to the MSDN documentation at somewhere unhelpful Exchange Error URI: my mex path Metadata contains a reference that cannot be resolved: 'my mex path'. Could not connect to my mex path. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8731. Unable to connect to the remote server No connection could be made because the target machine actively refused it 127.0.0.1:8731HTTP GET Error URI: my mex path There was an error downloading 'my mex path'. Unable to connect to the remote server No connection could be made because the target machine actively refused it 127.0.0.1:8731

  Read the article

• Suitable ESXi Spec

  - by Canacourse

  Finally I have some money to buy a new server and replace the one I have been using for 10 years. Im thinking of running ESXi on the new server. And intend to use it as follows; One W2008 R2 Guest running Exchange, File store, SVN and an accounting application for day to day running of the company. Multiple Guest VMs W2K, XP, Vista & WIN7 that were setup for testing in-house & real customer images also for testing. Probably Two Server Guest Os's W2003 & W2008 running at the same time again for testing. One Guest VM for builds & Continuous integration. Possibly one Guest running W220R2 for a customer website (Portal) This server will have to last another 10 years so I want to get the spec right. Althought I am clear on the memory and disk requirments I am not so clear on the processor(s). Im thinking of 2 Quadcore processors but welcome advice on this. Proposed Spec 10GB Ram 2TB Sata Drives (Hardware Raid 1) 2 Processors (TBC) Normally 3 Server VM's will running concurrently and the other VMs will be started as required. Max expected VMs running about 7. Max users = 4. TIA..

  Read the article

• How do I process the configure file when cross-compiling with mingw?

  - by vy32

  I have a small open source program that builds with an autoconf configure script. I ran configure I tried to compile with: make CC="/opt/local/bin/i386-mingw32-g++" That didn't work because the configure script found include files that were not available to the mingw system. So then I tried: ./configure CC="/opt/local/bin/i386-mingw32-g++" But that didn't work; the configure script gives me this error: ./configure: line 5209: syntax error near unexpected token `newline' ./configure: line 5209: ` *_cv_*' Because of this code: # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\(a-zA-Z_a-zA-Z0-9_*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_* fi Which is generated then the AC_OUTPUT is called. Any thoughts? Is there a correct way to do this?

  Read the article

• XML problem in the basic menu example

  - by arakn0

  Hi there, I am trying to create an app with some menus, an I am following the basic example available in the official android site: http://developer.android.com/guide/topics/ui/menus.html My problems appear when I define the menu in the XML. After creating the folder res/menu and creating the menu_option.xml file from eclipse.... The project (in general) gives an error that can be read from the Problems tab: Unparsed aapt error(s)! Check the console for output Android Packaging Problem So, changing to the Console tab to get more information about the problem, this can be read: [2010-06-02 11:35:54 - TestAudio] Error in an XML file: aborting build. [2010-06-02 11:35:54 - TestAudio] W/ResourceType(11566): Bad XML block: header size 63327 or total size -144759824 is larger than data size 0 [2010-06-02 11:35:54 - TestAudio] /home/User/workspace/TestAudio/res/menu/options_menu.xml:1: error: Error parsing XML: no element found The strange thing is that eclipse recognizes the menu items that I've defined in the XML,I can reference them in the code with no problems and my main activity builds. (and the rest of the files too). Could it be that when eclipse creates a file, for some reason, the Android SDK has problems to read it, or something similar?? The XML code is exactly the same as the one in the example, so I don't really know what is happening. The code in options_menu.xml is this: <menu xmlns:android="http://schemas.android.com/apk/res/android" <item android:id="@+id/new_game" android:title="New Game" / <item android:id="@+id/quit" android:title="Quit" / </menu Thanks in advance for your help!

  Read the article

• Building a custom (dynamic) dataset and grid

  - by marko.ivanovski.nz

  Hi, I'm in the process of building a dynamic table in which you can add/remove rows & columns so it varies in size depending on what the user wants. Its purpose is to store properties for a product, but there can be from 1 to 10 different properties(columns) per product, and multiple instances(rows) of the product as well. Here's a screenshot of what I mean http://i40.tinypic.com/nbqkxc.jpg As you can see I need the structure to be completely up to the client which is where I'm getting stuck. I've started writing a custom DataSet that has "add column" & "add row" buttons, and have built a custom Table with Textboxes in each cell which builds from that dataset. I have no idea how to store the data on submit though, and to make it even more complex I need to store this in the database as a string which I think I can do by converting it to XML. Any help is appreciated, I think I just need a pointer in the right direction and am happy to do research from there. Thanks in advance. Marko

  Read the article

• Calling method on category included from iPhone static library causes NSInvalidArgumentException

  - by Corey Floyd

  I have created a static library to house some of my code like categories. I have a category for UIViews in "UIView-Extensions.h" named Extensions. In this category I have a method called: - (void)fadeOutWithDelay:(CGFloat)delay duration:(CGFloat)duration; Calling this method works fine on the simulator on Debug configuration. However, if try to run the app on the device I get a NSInvalidArgumentException: [UIView fadeOutWithDelay:duration:]: unrecognized selector sent to instance 0x1912b0 *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[UIView fadeOutWithDelay:duration:]: unrecognized selector sent to instance 0x1912b0 It seems for some reason UIView-Extensions.h is not being included in the device builds. What I have checked/tried I did try to include another category for NSString, and had the same issue. Other files, like whole classes and functions work fine. It is an issue that only happens with categories. I did a clean all targets, which did not fix the problem. I checked the static library project, the categories are included in the target's "copy headers" and "compile sources" groups. The static library is included in the main projects "link binary with library" group. Another project I have added the static library to works just fine. I deleted and re-added the static library with no luck -ObjC linker flag is set Any ideas? nm output libFJSCodeDebug.a(UIView-Extensions.o): 000004d4 t -[UIView(Extensions) changeColor:withDelay:duration:] 00000000 t -[UIView(Extensions) fadeInWithDelay:duration:] 000000dc t -[UIView(Extensions) fadeOutWithDelay:duration:] 00000abc t -[UIView(Extensions) firstResponder] 000006b0 t -[UIView(Extensions) hasSubviewOfClass:] 00000870 t -[UIView(Extensions) hasSubviewOfClass:thatContainsPoint:] 000005cc t -[UIView(Extensions) rotate:] 000002d8 t -[UIView(Extensions) shrinkToSize:withDelay:duration:] 000001b8 t -[UIView(Extensions) translateToFrame:delay:duration:] U _CGAffineTransformRotate 000004a8 t _CGPointMake U _CGRectContainsPoint U _NSLog U _OBJC_CLASS_$_UIColor U _OBJC_CLASS_$_UIView U ___CFConstantStringClassReference U ___addsf3vfp U ___divdf3vfp U ___divsf3vfp U ___extendsfdf2vfp U ___muldf3vfp U ___truncdfsf2vfp U _objc_enumerationMutation U _objc_msgSend U _objc_msgSend_stret U dyld_stub_binding_helper

  Read the article

• Why does the Java Collections Framework offer two different ways to sort?

  - by dvanaria

  If I have a list of elements I would like to sort, Java offers two ways to go about this. For example, lets say I have a list of Movie objects and I’d like to sort them by title. One way I could do this is by calling the one-argument version of the static java.util.Collections.sort( ) method with my movie list as the single argument. So I would call Collections.sort(myMovieList). In order for this to work, the Movie class would have to be declared to implement the java.lang.Comparable interface, and the required method compareTo( ) would have to be implemented inside this class. Another way to sort is by calling the two-argument version of the static java.util.Collections.sort( ) method with the movie list and a java.util.Comparator object as it’s arguments. I would call Collections.sort(myMovieList, titleComparator). In this case, the Movie class wouldn’t implement the Comparable interface. Instead, inside the main class that builds and maintains the movie list itself, I would create an inner class that implements the java.util.Comparator interface, and implement the one required method compare( ). Then I'd create an instance of this class and call the two-argument version of sort( ). The benefit of this second method is you can create an unlimited number of these inner class Comparators, so you can sort a list of objects in different ways. In the example above, you could have another Comparator to sort by the year a movie was made, for example. My question is, why bother to learn both ways to sort in Java, when the two-argument version of Collections.sort( ) does everything the first one-argument version does, but with the added benefit of being able to sort the list’s elements based on several different criteria? It would be one less thing to have to keep in your mind while coding. You’d have one basic mechanism of sorting lists in Java to know.

  Read the article

• How to modify/replace option set file when building from command line?

  - by Heinrich Ulbricht

  I build packages from a batch file using commands like: msbuild ..\lib\Package.dproj /target:Build /p:config=%1 The packages' settings are dependent on an option set: <Import Project="..\optionsets\COND_Defined.optset" Condition="'$(Base)'!='' And Exists('..\optionsets\COND_Defined.optset')"/> This option set defines a conditional symbol many of my packages depend on. The file looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <DCC_Define>CONDITION;$(DCC_Define)</DCC_Define> </PropertyGroup> <ProjectExtensions> <Borland.Personality>Delphi.Personality.12</Borland.Personality> <Borland.ProjectType>OptionSet</Borland.ProjectType> <BorlandProject> <Delphi.Personality/> </BorlandProject> <ProjectFileVersion>12</ProjectFileVersion> </ProjectExtensions> </Project> Now I need two builds: one with the condition defined and one without. My attack vector would be the option set file. I have some ideas on what to do: write a program which modifies the option set file, run this before batch build fiddle with the project files and modify the option set path to contain an environment variable, then have different option sets in different locations But before starting to reinvent the wheel I'd like to ask how you would tackle this task? Maybe there are already means meant to support such a case (like certain command line switches, things I could configure in Delphi or batch file magic).

  Read the article

• TFS 2010 Build gives WorkItemStore error when Create Work Item on Failure is enabled

  - by Derek Morrison

  I'm using TFS 2010 Build. I have a build definition that uses the DefaultTemplate.xaml template that's stock in TFS 2010, and the Create Work Item on Failure property is set to True in the build definition. I deliberately made a change in my project that breaks the build. When the build runs, I see the compilation error reflected in the TFS Build log within Visual Studio, but I get the error "Value cannot be null. Parameter name: WorkItemStore" when TFS Build next tries to generate a Work Item for the broken build. I tracked down the activity in DefaultTemplate.xaml (see the rather lengthy path to it below) where the Work Item is created for a broken build, and I see it uses the Microsoft.TeamFoundation.Build.Workflow.Activities.OpenWorkItem class to create the Work Item. The appropriate values seemed to be filled out in the Properties window for the Create Work Item activity, so I don't see where I can pass WorkItemStore to it and I don't even know appropriate values for this setting. Path to the Create Work Item activity: Process Sequence Run On Agent Try Compile, Test, and Associate Changesets and Work Items Sequence Compile, Test, and Associate Changesets and Work Items Try Compile and Test Compile and Test For Each Configuration in BuildSettings.PlatformConfigurations Compile and Test for Configuration If BuildSettings.HasProjectsToBuild For Each Project in BuildSettings.ProjectsToBuild Try to Compile the Project Handle Exception If CreateWorkItem Create Work Item for non-Shelveset Builds Create Work Item

  Read the article

• How to set UCS2 in numpy?

  - by mindcorrosive

  I'm trying to build numpy 1.2.1 as a module for a third-party python interpreter (custom-built, py2.4 linux x86_64) so that I can make calls to numpy from within it. Let's call this one interpreter A. The thing is, the system-wide python interpreter (also py2.4, let's call it B) from the vendor is built with --enable-unicode=ucs4, while the custom one is with UCS2. Needless to say, when I try to build a module with B, I get an error when I try to import numpy in A -- it complains about undefined symbol _PyUnicodeUCS4_IsWhiteSpace. I've searched around and apparently there's no way around this but to compile a custom Python interpreter -- which I did (let's call it interpreter C), properly specifying the unicode string length (verifiable through sys.maxunicode). I managed to build numpy with C as well, surprisingly enough, but still the problem persists when I try to import it in interpreter C. Previously, when I built numpy using B, there were no problems when importing it in B, but A would complain. Perhaps there's an option when building numpy to specify the length of Unicode strings to be used, as when configuring Python builds? Or am I doing something else wrong? A few notes: Upgrading to newer versions of python and/or numpy is not an option - interpreter A will stay on this version of the grammar for the foreseeable future. Also, it is not possible to start the interpreter A in standalone mode to build numpy with it, as it needs some other libraries preloaded I know that this whole thing is a mess, but I'd appreciate any help I can get to make this work. If you need more information, please let me know, I'd be happy to oblige. Thanks to everybody for their time in advance.

  Read the article

• Side by side madness - running binaries on different computer (with a twist)

  - by sbk

  Here's my configuration: Computer A - Windows 7, MS Visual Studio 2005 patched for Win7 compatibility (8.0.50727.867) Computer B - Windows XP SP2, MS Visual Studio 2005 installed (8.0.50727.42) My project has some external dependencies (prebuilt DLLs - either build on A or downloaded from the Internet), a couple of DLLs built from sources and one executable. I am mostly developing on A and all is fine there. At some point I try to build my project on computer B, copying the prebuilt DLLs to the output folder. Everything builds fine, but trying to start my application I get The application failed to initialize properly (0xc0150002).... The event log contains two of those: Dependent Assembly Microsoft.VC80.CRT could not be found and Last Error was The referenced assembly is not installed on your system. plus the slightly more amusing Generate Activation Context failed for some.dll. Reference error message: The operation completed successfully. At this point I'm trying my Google-Fu, but in vain - virtually all hits are about running binaries on machines without Visual Studio installed. In my case, however, the executables fail to run on the computer they are built. Next step was to try dependency walker and it baffled me even more - my DLLs built from sources on the same box cannot find MSVCR80.DLL and MSVCP80.DLL, however the executable seems to be alright in respect to those two DLLs i.e. when I open the executable with dependency walker it shows that the MSVC?80.DLLs can be found, but when I open one of my DLLs it says they cannot. That's where I am completely out of ideas what to do so I'm asking you, dear stackoverflow :) I admit I'm a bit blurry on the whole side-by-side thing, so general reading on the topic will also be appreciated.

  Read the article

• Gradle fails injecting dependencies into subprojects using fileTree

  - by Matthias

  Maybe I'm missing something about the way Gradle works. What I have here is a parent project, which only contains configuration, i.e. there won't be any artifact being built when building it, it merely manages and builds all its subprojects. Now the subprojects share some dependency configuration, so I figured what I would do in the root project's build.gradle is: subprojects { dependencies { compile fileTree(dir: 'lib', includes: ['*.jar']) } } that, however, does not work, it fails with a rather obscure error message: A problem occurred evaluating root project 'qype-android' Cause: No signature of method: org.gradle.api.internal.artifacts.dsl.dependencies.DefaultDependencyHandler.compile() is applicable for argument types: (org.gradle.api.internal.file.DefaultConfigurableFileTree) values: [file set 'lib'] Possible solutions: module(java.lang.Object) after some trial and error, I could "fix" this issue by applying the 'java' plugin to the parent project. How come? I don't see anywhere from the Gradle docs that a fileTree dependency requires the Java plugin. Even so, why would I need it on the project that is injecting the configuration, as opposed to on the project that is being configured (note that the subprojects all apply the Java plugin themselves)? Does this mean that if I have N different subprojects that are all of varying natures, and apply different plugins, that the parent projects must always apply the set of all plugins beings used somewhere to itself, too?

  Read the article

• TeamCity output artifacts not published to IIS7 folder

  - by clausas

  I am trying to set up TeamCity to build and deploy an ASP.NET MVC application. I have the setup running successfully on other servers using TeamCity 4.5, but the new server is running TeamCity 6, and I am having trouble getting it to work as expected. TeamCity manages to get the files from source control, and the project (Visual Studio Solution 2008 set to "Build") builds and outputs the necessary files as expected. The problem seems to be with my artifact paths, as the output files are not copied to the website folder. My solution consists of dozen projects, of which the "Web" project is the interesting one in this case. The build checkout directory is C:\TeamCity\buildAgent\work\7da320cebf0ee541, and the "Web"-project is found in C:\TeamCity\buildAgent\work\7da320cebf0ee541\Web I have set up my build configuration with the following artifact paths (relative from checkout directory to the folder containing the website): Web/bin=>../../../../inetpub/wwwroot/staging/bin Web/Content=>../../../../inetpub/wwwroot/staging/Content Web/Views=>../../../../inetpub/wwwroot/staging/Views Web/Media=>../../../../inetpub/wwwroot/staging/Media Web/*.aspx=>../../../../inetpub/wwwroot/staging Web/*.asax=>../../../../inetpub/wwwroot/staging (I've tried with more ../ just in case, but it didn't make a difference). This is the output I get from the log [19:35:29]: Publishing artifacts (1s) [19:35:29]: [Publishing artifacts] Paths to publish: [Web/bin=../../../../inetpub/wwwroot/staging/bin, Web/Content=../../../../inetpub/wwwroot/staging/Content, Web/obj=../../../../inetpub/wwwroot/staging/obj, Web/Views=../../../../inetpub/wwwroot/staging/Views, Web/Media=../../../../inetpub/wwwroot/staging/Media, Web/.aspx=../../../../inetpub/wwwroot/staging, Web/.asax=../../../../inetpub/wwwroot/staging, teamcity-info.xml] [19:35:30]: [Publishing artifacts] Sending files [19:35:32]: Build finished Logs from some of the other servers running TeamCity 4.5 uses a different format, with a line for each of the artifacts being published, I'm not sure if this is relevant or only due to a different logging format. Everything seems to be working, but no files are put in my website folder after a build, am I missing something here? Any help will be much appreciated :)

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >