Search Results

Search found 2503 results on 101 pages for 'destination'.

Page 53/101 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• Squid "system returned (13) Permission denied"

  - by AndyM

  I can get to a site form my Squid server directly using lynx http://my-URL , ie not using squid as the proxy, just to prove the connectivity exists. Lynx connects fine to the site - its a Weblogic portal When I try the same site from client with the squid machine as a proxy I get a squid error indicating that the destination site refused the connection from Squid. The squid server is a RHEL5.5 server. The error is something like The following error was encountered: Connection Failed The systen returned: (13) Permission denied Any ideas ? The squid access.log just indicates a TCP_MISS. Its as if the destinatin site knows its been accessed by squid and is not allowing ?

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• Unable to log iptables

  - by ActuatedCrayon

  I'm having trouble getting iptables to log to any file. My iptables looks like: Chain INPUT (policy ACCEPT 1366 packets, 433582 bytes) pkts bytes target prot opt in out source destination 869 60656 LOG icmp -- venet0 * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 7 Syslogd is the only log helper running. The default syslog.conf didn't work, so I tried adding "kern.=debug -/var/log/iptables.log". But the file already has "kern.* -/var/log/kern.log". There are recent syslog entries, so it's not a permissions thing. I'm running Ubuntu 12.04.1 with 2.6.32-042stab061.2

  Read the article

• Replicating EFS encrypted files

  - by floyd

  Recently I attempted to configure Microsoft's DFSR on Windows 2008 R2 to replicate a folder which was encrypted with EFS. The setup gave no errors or warnings, but later I read that DFSR does not support EFS in any way. There were also event logs in the DFSR event log indicating an encrypted file was found and wont be replicated. http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_052 My question is, are there any tools that would allow this to occur? Software based preferably.This would be replicating over LAN to destination node for two servers on the same domain.

  Read the article

• Gmail for Googleapps mail delivery issues

  - by epeleg

  I have a google apps domain running gmail. One of the owners of one of the email accounts is complaining that some emails don't get delivered to him. I sent him an email that did not get to its destination on one hand but I got no NDR on the other hand. I have already checked that the email was not on in his spam folder. The only thing that he has there is a forwarding rule that is also set up to leave the original in place. I am looking for any tools or ideas on how to debug this.

  Read the article

• How to Mirror or Clone a Spanned Volume in Windows 2008

  - by Matt

  I have a spanned volume (3x6+ TB disks spanned to one 20+ TB volume) that I need to mirror or clone to a new 20+ TB (unspanned) volume. Once mirrored or cloned I'm going to destroy the original volume and reuse the storage elsewhere. Windows 2008 will not allow me to mirror it because the original is a spanned volume. I cannot simply copy the data, because there are sparse files on the volume. So the OS thinks there is 150+ TB used on the disk when there really is only around 18TB used physically. When I try to use the copy command it won't run because it thinks the destination volume needs to be 150+ TB to hold it all. A conundrum, but I figure someone here has the answer. Thanks, Matt

  Read the article

• Postfix how to triggering my script when outgoing email status is sent?

  - by Laszlo Malina

  I want to run a program when postfix has successfully sent out a mail (local or remote). I would like to pass the headers to program and if possible also the destination ip or address (exclude spam filter delivery). I just have an idea: Delivery Status Notification processing via uniqe transport program, but I'd prefer the above. My goal is to be recorded lifetime (events) of email: it came, it went out (from, to, subject, datetime, message id, message status: bounce, sent). I would only need the state of the outgoing mail, because incoming and bounce program is working. It is possible to trigger a program (similar to a transport pipe/spawn) or DSN "cheat" stay? Thanks in advance for any reply!

  Read the article

• On RouterOS, how will transparent proxying (with DNAT) affect reporting of netflows?

  - by Tim

  I have a box running Mikrotik RouterOS, which is set up to do transparent web proxying, as described here. In short, this means that I have a firewall rule for destination NAT causing any port 80 traffic to get redirected to port 8080 on the router, which is received by the Mikrotik local web proxy. The local web proxy then makes the web request on the client's behalf, in this case to a parent web proxy server (which in turn does the real web request). My question is, how will this two-part process get reported in the logging of traffic flow information (netflows)? Looking at the logged information, what I seem to be seeing is this: One flow recorded from client machine (private IP) to remote proxy (8080) Another flow recorded from router to remote proxy (8080) The original request that the client made to port 80 isn't recorded. I want to write code to analyse traffic usage, so I want to be sure I'm not losing information if I discard the latter of these.

  Read the article

• Wget site mirror, links with rel="<content>" not followed

  - by Pacifika

  Whilst creating a site mirror using wget 1.12 on Ubuntu links with a rel attribute set are not downloaded: <a href="link" rel="tag">text</a> Rel="tag" is a microformat (By adding rel="tag" to a hyperlink, a page indicates that the destination of that hyperlink is an author-designated "tag" (or keyword/subject) for the current page). My WordPress theme uses this for link to tags, so 99% of the site is ignored. Edit: it turns out all my permalinks use rel="bookmark" and are skipped as well. I'm using the following wget command (this ignores robots.txt and also follows nofollow links): wget -mkp -e robots=off http://site How do I make wget follow links with rel set?

  Read the article

• SCCM not processing hardware Inventory

  - by Sreekumar

  We have some workstations that will not import hardware inventory into the SCCM 2007 database. What I've done: Client - verified workstation object is discovered in SCCM - installed ccm client on workstation - manually ran hardware inventory action - verifed Inventory report was sent successfully "Successfully sent report Destination:mp:MP_HinvEndpoint, ID ..... - watched file on client enter and exit temp folder on client. - successfully ran MP Spy to verify client communicates with server - uninstalled client, deleted ccm and ccmsetup folders and reinstalled. Server - no entries in MP_Hinv.log file that coorespond with time stamp of workstation - no entries in dataldr.log file that coorespond with time stamp of workstation Where are these files going? All T/S blogs expect entries in these logs. This is driving me crazy.

  Read the article

• Dual-WAN router

  - by aix

  I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

  Read the article

• Is it possible to tunnel ICMP over TCP?

  - by Robert Atkins

  I don't want to tunnel TCP over ICMP (as ptunnel does), I want to go the other way around. I'm in the situation where I have TCP (HTTP) connectivity to a machine but an internal firewall over which I have no control is swallowing pings. The monitoring software I'm using appears to determine connectivity by attempting to send a ping before it tries to just connect to the web service on the target machine. It's failing this ping test and giving up. I believe if I could fool my monitoring software into thinking pings were getting through, it would then connect to the web service and be on its merry way. Anyone know how I can do this? I have SSH and root access on the destination machine.

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• Backup and restore MySQL database without system access

  - by Sencerd

  Hi guys, I am trying to move a database from 1 provider to another, the problem is that I don't have system access at either end (ie, no ssh), so I cannot use a mysqldump. I have already tried using MySQL Administrator, the backup took about 45 minutes, but when it came to restoring it was moving at a snails pace, and estimating 12+ hours. This is a live app so I need to keep the downtime to an absolute minimum. The database consists of 35 tables, a mixture of MyISAM and InnoDB, the whole thing comes to about 4.4GB. The source and destination databases are both running on very powerful servers. Any suggestions on a quick way of doing this will be gratefully received. Thanks

  Read the article

• iptables and snatting to different networks

  - by codingfreak

  linuxbox (p.q.r.t) | | INTERNAL ------ ABCD ----- INTERNET (p.q.r.s) (m.n.o.k) ABCD has 3 interfaces connected to linuxbox, INTERNAL N/W, INTERNET. Linuxbox has a private address (p.q.r.t). At present I am snatting the packets from linuxbox to INTERNET at ABCD. I have a small doubt regarding the FTP from linuxbox since I have to support ftp from linuxbox to both INTERNAL N/W as well as in INTERNET. How can I right a rule in iptables present in ABCD where it can decide if the destination ip-address of ftp server is within INTERNAL N/W or in INTERNET and do natting accordingly.

  Read the article

• Why does cpio say "WARNING! These file names were not selected" when copying a large number of files

  - by mmm bacon

  For over 10 years, I've been using this strategy to copy a large number of files between UNIX filesystems: cd source_directory find . -depth -print | cpio -pdm /path/to/destination_directory It works like a champ. However, I'm now getting this error from cpio: cpio: WARNING! These file names were not selected: (long list of files here...) The source directory is on OSX 10.5, and the destination directory is a NFS filesystem from an OpenSolaris server. Copying over NFS has never been a problem in the past. There's nothing strange about the filenames, meaning there aren't special characters or anything like that. Any ideas?

  Read the article

• e-mail no longer coming to aol inbox since I opened a Hotmail account [closed]

  - by Dave

  I recently set up an email account with Hotmail. I have used AOL e-mail for years and would like to keep this as my main source for sending/receiving e-mail. When I set up the Hotmail account there was an option to have all my e-mail accounts forwarded to the Hotmail inbox. I set up this option and the page promised that all incoming mail would still be visible in the original inbox, in this case my AOL account. Well everything does come to the Hotmail account, the only problem is that I no longer receive these e-mails in my primary/desired location which is AOL. I went back and made sure the box was checked that provided the option through Hotmail that said "leave a copy of my messages on the server" (AOL) How do I get the e-mail that is being forwarded to Hotmail from my AOL account to still be visible in AOL, it should be in AOL inbox as that is the original destination but it is gone. Suggestions?

  Read the article

• Routing table change to access Internet over mifi

  - by Randall Blake

  I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

  Read the article

• How can I make results of a formula values that can be filtered or use vlookup with Excel

  - by Burt

  I am having an issue in that I am using various formulas to move, split data, etc from various sources. The problem is when my final results post to the final destination that I want, I still need to either run advanced filters, or a vlookup with the results. I can’t do this because as an example if cell A1 shows a value of: A127 the actual cell content is: =RIGHT(A2,FIND(" ",A2&" ")-2) Everything I read said to copy and paste special values, but this doesn’t work for me as the idea is to have the formulas/macros run everything and eliminating cutting and pasting. In the case above I have a formula that pulls that info from a spreadsheet that is saved every week. Once it is pulled part of it is cut out in another column. I then need to run a vlookup on those results for data already contained on another tab.

  Read the article

• Win 7 Explorer backup and long paths

  - by user53299

  I use Explorer to do backups because Win 7's backup program asks me to take backups previously done and to put them back in the drive. I am opposed to that idea since I believe backups should remain in storage. With Explorer backups (burn and burn to disc) I have encountered the "destination path too long" error message and it shows the name of a folder "Debug" three times. I have hundreds of folders named "Debug" thanks to Visual Studio. At this moment I'm too angry at Microsoft to write a program to determine my 3 longest paths. (Aside: This is all after coincidentally reading two articles about path junctions earlier this evening which already made me kind of unhappy.) Please, is there an easy way to continue to make backups with Explorer? Edit: I should add that renaming paths wrecks Visual Studio projects so I really need to isolate the small number of problem paths or find a cleaner solution.

  Read the article

• Do I need to have a proxy server to have HTTP over SSH?

  - by Johnes thomas

  I want to use HTTP over SSH since in my university most of the sites are blocked. I have my own server to which I can using SSH. What I'm doing right now is have a squid proxy run on the server on a particular port. Then connect using putty to my server via ssh and create a tunnel from a certain local port (which I will enter as proxy server in Firefox) to the squid server. So in putty the configuration is like this for the tunnel: source port:8080 destination:localhost:3128 I want to know is there any other way other than running the squid proxy on my server to tunnel the packets? Thanks.

  Read the article

• Is Winpcap able to capture all packets going through a Gigabit NIC without missing any packets?

  - by Patrick L

  I want to use Winpcap to capture all network packets going through a Gigabit NIC of a server. Assuming that I am able to utilize the network link up to 100%, the maximum network speed is 1000Mbps. If we exclude the TCP/IP headers, the maximum TCP data rate should be roughly 940Mbps. Let's say I send a 1GB file through the NIC at 940Mbps using TCP destination port 6000. I use Winpcap to capture all network packets going through the NIC and then dump it to a pcap file. If I use Wireshark to analyze the pcap file and then check the sum of packet size for all network packets sent to TCP port 6000, am I able to get exactly 1GB from the pcap file? Thanks.

  Read the article

• IPTables reroute traffic not working

  - by user1307079

  I am trying to reroute incoming traffic on my server's port 80 to another server, but it is not working. This is what I tried. On the host server, I ran these: echo “1? > /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 38.105.20.226:80 iptables -t nat -A POSTROUTING -j MASQUERADE The server I want it to redirect to is 38.105.20.226:80, but when I go to the webserver that is on the main server, instead of showing the content of the web server on 38.105.20.226:80, it just doesn't load. I am on CentOS.

  Read the article

• No Internet access while being connected to VPN using Cisco VPN Client 5.

  - by szeldon

  Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >