Search Results

Search found 17366 results on 695 pages for 'memory card'.

Page 53/695 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Getting a TV Capture Card working

  - by Benny Hallett

  I'm new to Linux, and am trying to get my Capture Card working on 11.04. The only command that I know to run to find out any information is lspci, which tells me that I have 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) I've looked at using Me TV, but haven't worked out how to configure it for my card, or what I need to do to get it running. I'm not fussed on what software I use to run the Capture Card, but I've currently got only Me TV installed. Edit: When I run tvtime, I get the following errors: videoinput: Cannot open capture device /dev/video0: No such file or directory mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Line, mixer volume and mute unavailable. Segmentation fault

  Read the article

• Getting a Conexant CX23885 TV Capture Card working

  - by Benny

  I'm new to Linux, and am trying to get my Capture Card working on 11.04. The only command that I know to run to find out any information is lspci, which tells me that I have 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) I've looked at using Me TV, but haven't worked out how to configure it for my card, or what I need to do to get it running. I'm not fussed on what software I use to run the Capture Card, but I've currently got only Me TV installed. Edit: When I run tvtime, I get the following errors: videoinput: Cannot open capture device /dev/video0: No such file or directory mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Line, mixer volume and mute unavailable. Segmentation fault

  Read the article

• No sound after installing a new Graphics Card

  - by Dan

  I've just upgraded my graphics card to an Asus Geforce 210 and now my system has no sound. I've ran Update Manager and the Additional Drivers utility which installed the latest Nvida driver. The graphics card is connected to my TV via a DVI-to-HDMI (DVI at the PC end) cable for the visual connection, and an audio jack from my onboard soundcard for my audio connection. Any ideas on how to resolve this? I ran this command ubuntu-bug audio And it outputted this: You seem to have configured PulseAudio to use the "pci-0000_05_00.1" card, while you want output from "NFORCE - NVidia CK804". I've tired a bit of messing about with the audio settings but can't get anything to work.

  Read the article

• OpenGL behaviour depending on the graphics card?

  - by Dan

  This is something that never happened to me before. I have an OpenGL code that uses GLSL shaders to texture a 3D model. The code involves a lot of GPU texture processing, blending, etc... I wanted to check how the performance of my code improves using a faster graphics card (both new and old are NVIDIA, using always the NVIDIA development drivers). But now I have found that once I run the code using the new graphics card, it behaves completely different (the final render looks wrong), probably because some blending effect is not performed correctly. I haven't really look into what has changed, but I am guessing that some OpenGL states are, by default, set different. Is this possible? Have you ever found different OpenGL/GLSL behaviour using different graphics cards? Any "fast" solution? (So far I've thought of plugging back the old one, push all OpenGL default states, and compare with the ones I initially get using the new card..)

  Read the article

• Handling & processing credit card payments

  - by Bob Jansen

  I'm working on program that charges customers on a pay as you go per month modal. This means that instead of the customers paying their invoices at the start of the month, they will have to pay at the end of the month. In order to secure the payments I want my customers credit card information stored so that they can be charged automatically at the end of the month. I do not have the resources, time, or risk to handle and store my customers credit card information on my servers and am looking for a third party solution. I'm a tad overwhelmed by all the different options and services that are out there and was wondering if anyone with experience have any recommendations and tips. I'm having difficulty finding services that allow me to to store my customers credit card information and charge them automatically. Most of them seem to offer an invoice styled approach.

  Read the article

• Cannot connect to Internet on 11.04 using BSNL EVDO Prithvi Card

  - by Joy

  I cannot connect to Internet using BSNL EVDO Prithvi data card. Went through some websites that offered help, installed wvdial package and tried again, but was unsuccessful. I have Read that, Ubuntu 11.04 automatically detects Data Card, You only need to configure "Network Manager" and it will work, I did exactly that, but the result is same. The OS detects the data card, and the presence of network , but it cannot login. I have read in some forums that Ubuntu 11.04 does not have support for BSNL EVDO Prithvi, is it true? I re-checked the "User ID" and "Password". Its working on Windows. Please help me fix this.

  Read the article

• 525 m nvidia grapic card is not work in Linux

  - by mayank khandelwal

  i have dell dell inspiron 15r and company give the windows 7 64 bit os. i have 1GB 525m nvidia graphic card which work in windows very well but when i install the ubuntu 10.10 then graphic card is not work. ubuntu 10.10 give that message that i have nvidia graphic card which not active you want to active. when i say ok then its download driver from the net and then install it when restart computer then graphic terminal is not working other terminal is work well. i have not idea why that happen plz help me ?

  Read the article

• new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

  - by Ragnarok85

  I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

  Read the article

• Boot Ubuntu on smartphone SD card?

  - by berad

  Now here's what I want: Ubuntu on the SD card that lives in my phone. I like using Ubuntu portably and my phone as a flash drive, but I haven't been able to make these work together yet. I've tried booting off my Huawei U8800 (Android 2.2) and Nokia E66 with a micro-SD card (with 11.10, boots OK in a card-reader) on an eeepc 901 without luck. The Huawei doesn't show up in the BIOS boot menu. BIOS sees the Nokia but halts at "Boot error". I guess this is related to the phone's flash drive emulation and how it handles bootsectors, but I don't know enough about how that works to go any further. Has anyone succeeded in this?

  Read the article

• No useful DVB-T card found

  - by Edu

  I am using Ubuntu 12.04 3.2.0-26 kernel and I just added a DVB-T card. I did install the media_build as in (http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers) After that the Restricted Drivers appeared on the screen and I installed the Firmware for DVB Cards. lsusb shows Bus 002 Device 005: ID 048d:9005 Integrated Technology Express, Inc. which is my card. lsmod shows these things regarding dvb dvb_usb_it913x 22173 0 dvb_usb 32369 1 dvb_usb_it913x dvb_core 110010 1 dvb_usb rc_core 26343 2 dvb_usb_it913x,dvb_usb Nevertheless there is no /dev/dvb on my linux and Kaffeine does not find the TV turner. Can anybody help me installing my TV Card? Thanks

  Read the article

• Ubuntu 12.04 with Intel 82845g/gl graphics card

  - by user209461

  I have an old machine with the intel card in the title installed. I'd really need to install Ubuntu 12.04 on it, but that's not just possible since the intel drivers don't work properly. So no video acceleration, no window decorations, and lots of other issues. I do know it's an obsolete unsupported card (see Which version of Ubuntu will work out of the box on Intel 82845G Board?) but I think I read somewhere that there had been progress as of late with the latest intel drivers. My question is: is there anything I can currently do to make this card work or should I just give up on the idea and turn to lighter DE like LXDE or XFCE? Thanks

  Read the article

• Acer sound card

  - by Rob Brugh

  Hi I have an acer aspire on a recent upgrade somehow it loaded dummy output into upper memory so every time I boot up I have to manually load my sound card. using sudo /sbin/alsa reload then alsamixer and f6 to change to my proper sound card. How do I go about making that my default sound card loading on boot every time. sometimes the message comes up cannot find alsamixer, if that happens I have to run the following command sudo /sbin/alsa force-reload and then alsamixer. That works only on current session I would like to get that so it boots without coming up with dummy output. anyone out there know what the command is to make that load to boot section?

  Read the article

• Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

  - by Visitor

  I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

  Read the article

• Kubuntu permanent install won't attach sound card

  - by rob

  I installed Kubuntu Live version and sound card visible in the volume/mixer panel. After installing the permanent version I have a dummy output where my sound card should be, therefore no sound. I re-installed the live version three times and then to permanent but the same problem each time. There is a very brief error on boot up to the permanent version that says: error. cannot attach card default. no such file or directory. I'm running Kubuntu 12.04 on a Mac G4 PPC with no other OS. I'm very new to Linux. I am able to follow instructions to help resolve this, but I'm not familiar with the OS.

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• What does the "Max Memory Size" on the new Intel Core i3 / i5 / i7 CPU's mean?

  - by Josh

  I just noticed in the specs of the new Intel Core i-series processors that there is a "Max Memory Size" that is usually pretty small -- anywhere from 8GB to 24GB. See here: http://ark.intel.com/Product.aspx?id=41316 Core 2-based motherboards were just starting to roll out support for 32GB and greater memory sizes. Anyone have any idea what the Max Memory Size indicates? Is this the total limitation of the on-chip memory controller? Limitation per channel? Limitation per stick (e.g. density??)? Thinking of building a decent machine that needs lots of RAM, so I'm looking at the i7 860.

  Read the article

• Transferring files from computer to Android Simulator SD Card ?

  - by mgpyone

  I've tried Android Simulator for Mac and can use it well. also I've set 100 MB for SD Storage for that simulator. however, I don't found a way of transferring files from my Mac to that Android Simulator SD Storage. Current solution is I've to send files to my mail and have to access via Simulator ,then download to it . well, but it's not available fro all formats . something like image file(.img) are not allowed to download to the simulator. I've seek any folder of SD Card for Simulator within Android Folder I've extracted. I've found nothing. I want to transfer files from my HD to Android simulator SD card storage. Thus, is there any effective solution that support my idea ? I'm on Mac OS X 10.6.2.

  Read the article

• Is the 2010 Apple Macbook Air 4GB memory upgrade worth it?

  - by ehfeng

  I'm looking to buy the new Macbook Air and, being from Windows, am unfamiliar how much memory it would be advisable to have (thinking about the 4GB upgrade). For those from the fairer OS: how much memory does the operating system take up? how much memory does Google Chrome, with 10-15 tabs open, probably a Youtube, Gmail, Docs among them, usually take up? Microsoft Word, Excel, Powerpoint? I plan on purchasing the 1.86Ghz 13" Macbook Air.

  Read the article

• What happens when you add a Graphics card to a i7 with build in graphics (e.g. HD 4000)

  - by Matt

  I'm thinking of upgrading my computer from an AMD Phenom II X4 955BE with a AMD Radeon HD 6800 Graphics card (not integrated) to using a Intel Core i7 3770. As I have no knowledge of integrated graphics, my question is, what happens to the computing power when not using the HD4000 integrated graphics of the CPU (does it mean the CPU will run faster then it would if I relied on it?) Also what is better the CPUs inbuilt HD4000 or my Radeon Graphics card? I am mostly interested in terms of content creation: Using Adobe After Effects, 3D Rendering etc. Not too bothered about gaming performance. I will be using the spare parts of this build and older systems to make a second computer for network renders so what will be the advantages of keeping the Radeon with the current system for that?

  Read the article

• Can I fully disable my PCIe Video/Graphics Card per BIOS/Software?

  - by Jook

  Because of a quite noisy fan of my HD6700 I was wondering, if I could fully disable my video card through BIOS or even some Software/Windows. Switching to Intel I7 2600 internal video helped already with the noise, but it would be great to have the HD6700 only build in, but not activated/powered. So that the fan could stay compleatly off. Of course, I could just remove the video card, but I would like to avoid that. Is there any way? My Mainboard is an ASUS P8H67-M Pro, with Intel I7 2600 and ATI HD6500

  Read the article

• Where should I plug in my monitor -- Motherboard or Graphics card?

  - by Jeremy White

  Assuming I am using the following equipment... motherboard with HDMI/DVI & no embedded graphics discrete graphics card (nVidia or ATI) on PCI-E slot Intel CPU with integrated graphics ...where should I plug my monitor into the computer? Presumably, I'll get the fastest speed on games connected directly to the graphics card. But there is also power savings when connecting to the motherboard and accessing the Intel on-board graphics. I've read that some motherboards can switch automatically between the Intel graphics and discrete graphics. Is that something that works well, and where do I connect the monitor to enable that?

  Read the article

• How do I hookup a dual video card Crossfire rig to a single monitor?

  - by Alexed

  I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

  Read the article

• How can I measure actual memory usage from my running processes?

  - by NullUser

  I have two servers, server1 and server2. Both of them are identical HP blades, running the exact same OS (RHEL 5.5). Here's the output of free for both of them: ### server1: total used free shared buffers cached Mem: 8017848 2746596 5271252 0 212772 1768800 -/+ buffers/cache: 765024 7252824 Swap: 14188536 0 14188536 ### server2: total used free shared buffers cached Mem: 8017848 4494836 3523012 0 212724 3136568 -/+ buffers/cache: 1145544 6872304 Swap: 14188536 0 14188536 If I understand correctly, server2 is using significantly more memory for disk I/O caching, which still counts as memory used. But both are running the same OS and if I remember correctly, I configured both with the same parameters when they were installed. I did a diff on /etc/sysctl.conf and they are identical. The problem is, I am collecting memory usage and other metrics over a period of time, (eg: vmstat, iostat, etc.) while a load is generated on the system. The memory used for caching is throwing off my calculations on the results. How can I measure actual memory usage from my running processes, rather than system usage? Is used - (buffers + cached) a valid way to measure this?

  Read the article

• Am I using too much memory? (Rails on EC2 with Resque)

  - by Stpn

  I am looking at the memory usage of the Rails application (it uses background processes via Resque) and since the common answer to the question, "how many workers is too many" was "test and see", I ran some memory commands and wonder if someone can help figuring if the memory usage is high enough already, or I can still add some extra workers.. so (this is all under the maximum load): $ free -t -m total used free shared buffers cached Mem: 1756 1532 223 0 12 229 -/+ buffers/cache: 1291 464 Swap: 895 10 885 Total: 2652 1543 1108 $ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 10588 156172 13400 326476 1 6 4 0 5 4 1 0 99 0 If there is any extra info I can provide to help answer this, I would be happy to do so. If the question is strange in some way, please let me know I'd be glad to fix etc..

  Read the article

• How to tell Linux to explicitly swap out main memory of a suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >