Search Results

Search found 3575 results on 143 pages for 'outlook macro'.

Page 53/143 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Need to search email body for regex using VBA

    - by user6620
    I am trying to write a script that I can run from a rule withing outlook. The goal of this script is to search the email body for a regex pattern, \d{8}-\d{3}\(E\d\) in this case. I want to take that pattern and see if a folder with the name of the match exists and if not create one. I am not super familiar with VBA as I write mostly in python. I have copied and pasted the following bit of code together but at this time I am unable to get the MsgBox to appear when I send an email with 20120812-001(E3) in the body. I have two different versions below. --version 2-- Sub Filter(Item As Outlook.MailItem) Dim Matches, Match Dim RegEx As New RegExp RegEx.IgnoreCase = True RegEx.Pattern = "\d{8}-\d{3}(E\d)" If RegEx.Test(Item.Body) Then MsgBox "Pattern Detected" End If End Sub --Version 1-- Sub ProcessMessage(myMail As Outlook.MailItem) Dim strID As String Dim objNS As Outlook.NameSpace Dim objMsg As Outlook.MailItem Dim objMatch As Match Dim RetStr As String Set objRegExp = New RegExp objRegExp.Pattern = "\d{8}-\d{3}\(E\d\)" objRegExp.IgnoreCase = True objRegExp.Global = True strID = myMail.EntryID Set objNS = Application.GetNamespace("MAPI") Set objMsg = objNS.GetItemFromID(strID) MsgBox objMsg.Body Set objMatch = objRegExp.Execute(objMsg.Body) MsgBox objMatch End Sub

    Read the article

  • Can I make a LaTeX macro 'return' a filename?

    - by drfrogsplat
    I'm writing my thesis/dissertation and since its an on-going work I don't always have the actual images ready for the figures I put into my document, but for various reasons want to automatically have it substitute a dummy figure in place when the included graphics file doesn't exist. E.g. I can do something like \includegraphics[width=8cm]{\chapdir/figures/fluxcapacitor} (where \chapdir is a macro for my 'current' chapter directory, e.g. \def\chapdir{./ch_timetravel} and if there's no ./ch_timetravel/figures/fluxcapacitor.jpg it'll insert ./commands/dummy.jpg instead. I've structured my macros (perhaps naïvely?) so that I have a macro (\figFileOrDummy) that determines the appropriate file to include by checking if the argument provided to it exists, so that I can call \includegraphics[properties]{\figFileOrDummy{\chapdir/figures/fluxcapacitor}}. Except I'm getting various errors depending on how I try to call this, which seem to suggest that I'm approaching the problem in a fundamentally flawed way as far as 'good LaTeX programming' goes. Here's the macro to check if the file exists (and 'return' either filename or the dummy filename): \newcommand{\figFileOrDummy}[1]{% % Figure base name (no extension) to be used if the file exists \def\fodname{#1}% \def\dummyfig{commands/dummy}% % Check if output is PS (.EPS) or PDF (.JPG/.PDF/.PNG/...) figures \ifx\pdfoutput\undefined% % EPS figures only \IfFileExists{\fodname.eps}{}{\def\fodname{\dummyfig}}% \else% % Check existence of various extensions: PDF, TIF, TIFF, JPG, JPEG, PNG, MPS \def\figtest{0}% flag below compared to this value \IfFileExists{\fodname.pdf}{\def\figfilenamefound{1}}{\def\figfilenamefound{0}}% \IfFileExists{\fodname.jpg}{\def\figfilenamefound{1}}{}% \IfFileExists{\fodname.png}{\def\figfilenamefound{1}}{}% % and so on... % If no files found matching the filename (flag is 0) then use the dummy figure \ifx\figfilenamefound\figtest% \def\fodname{\dummyfig}% \fi% \fi% % 'return' the filename \fodname% }% Alternatively, here's a much simpler version which seems to have similar problems: \newcommand{\figFileOrDummy}[1]{% \def\dummyfig{commands/dummy}% \dummyfig% } The \def commands seems to be processed after the expansion of the macro they're trying to define, so it ends up being \def {commands/dummy}... (note the space after \def) and obviously complains. Also it seems to treat the literal contents of the macro as the filename for \includegraphics, rather than resolving/expanding it first, so complains that the file '\def {commands/dummy}... .png' doesn't exist.. I've tried also doing something like \edef\figfilename{\figFileOrDummy{\chapdir/figures/fluxcapacitor}} to try to force it to make \figfilename hold just the value rather than the full macro, but I get an Undefined control sequence error complaining the variables I'm trying to \def in the \figFileOrDummy macro are undefined. So my question is either How do I make this macro expand properly?; or If this is the wrong way of structuring my macros, how should I actually structure such a macro, in order to be able to insert dummy/real figures automatically?; or Is there a package that already handles this type of thing nicely that I've overlooked? I feel like I'm missing something pretty fundamental here...

    Read the article

  • How to auto-cc a system email account any time a user creates an appointment

    - by Ferdy
    I will not bother explaining my full architecture or reasons for wanting this in order to keep this question short: Is it possible to auto-cc a certain email account any time a Exchange user creates an appointment or meeting in his own calendar? Is it possible using rules? Our Exchange 2007 server is outsourced, I cannot change the configuration or install plugins server-side Preferably, it still should work server-side, because users may use the Outlook client but also Outlook Web Access Is there any other way, perhaps using group policies? My conclusion so far is that the only viable way to accomplish this is to build an Outlook add-on. The problem there is that it will need to be managed for thousands of desktop users and that the add-on will not work when using another client (OWA, mobile). An alternative architecture could be to pull the information from the user's calendar on a scheduled basis. Given that we are talking about a lot of users, scalability is a major issue, this has also been confirmed by Microsoft. Can you confirm that my thinking is correct or do you have any other solutions?

    Read the article

  • Can't pop3 from exchange server after a reboot

    - by BLAKE
    Last night I shutdown my Exchange 2003 Virtual Machine, I added a new VHD (For backups), and booted it again. Now I can't POP3 email from it with Outlook 2007. In Outlook I get the error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' Does anybody know what is wrong? All I did was a reboot. I haven't formated the added disk. There are no weird errors in the event log. I can still send mail with Outlook over port 25. I can send and recieve mail with OWA. I can POP3 the mail to my phone (it take about 15 minutes after sending a message, but I do get it eventually). EDIT: The 'Microsoft Exchange POP3' Service says that it is started but if I stop it and try to start it again, it fails saying 'Could not start the Microsoft Exchange POP3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion.' I did some googling and someone on exchangefreaks.com said that if I use task manager to 'End Task' on inetinfo.exe, then I can start the POP3 service fine. Does anyone know what causes this problem? I am fine for now since I did get the Service started, but If it does this after every reboot...

    Read the article

  • Adobe Reader Wants Sensitive Email Details

    - by KDM
    When I run Adobe Reader, it tells me: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client. I have a couple of issues with this: 1) It presupposes everyone has Microsoft Office installed. Not all home users have the budget or inclination for this. 2) It presupposes everyone wants Microsoft Outlook to be their default mail client. 3) I have Microsoft Office (incl. Outlook) installed and set as my default mail client. Even if I make it the default mail client from within the Adobe Reader Preferences, that doesn't stop the dialog appearing. 4) I thought I'd give Adobe Reader a new email address in the preferences, just to get it to stop bugging me. I notice, though, that it want's the SMTP and POP addresses and the account password? They have got to be kidding? I just want to view PDF files. How do I get the message to go away without telling Adobe my life story, giving them my mother's maiden name, my favourite movie, my place of birth, the name of my first goldfish and emptying the contents of my wallet for them?

    Read the article

  • Google Apps Sync bloated PST file to 14GB

    - by James S
    Back story: I have Outlook connected to my Google Apps email and noticed that some mail never got migrated from my original PST file. I found some VBA code online that compares mail in different PST folders, modified it to find missing and copy those to the target folder. I ran it folder by folder and moved missing mail. Before the exercise the Google Apps PST was about ~4GB and after it was ~4.7GB. Problem: I left Outlook open so Google Sync can copy it online. 24 hours later the Google Apps PST file bloated to 14GB+ and none of the mail has been synced to the cloud. I know that there should be at most ~5GB of mail. Why is the rest of the space being taken up? Funny thing is Gmail shows 3GB as being used online. What I tried: I emptied the deleted items folder and recycling bin I've run Outlook compact PST and it didn't work. I tried SCANPST.exe on the PST and it didn't work. I re-ran compact PST and it didn't work (after SCANPST found and fixed a few errors) Any ideas out there on what caused the problem and how to solve it?

    Read the article

  • Choosing the right e-mail client

    - by CFP
    Hi all, I'm currently using Outlook 2007 (under windows 7), but I much prefer free software (open source being the best of course), so I thought I'd ask for expert advice here. I thought it might be easier if I included a small "wanted list": I receive about 15 to 30 e-mails every day, but I have large archives (10'000 emails), which I frequently need to access. I usually open and close my mail program many times, so I'd like it to start pretty fast I cannot use an online mailbox, because I have too many email addresses (about 5: 1 for work, 1 for home, 1 semi-private, 1 for specific emails, and 1 for newletters By order of importance, the things I'd like my mail client to be able to: Efficiently categorize e-mails. Until now, I've mostly been using Outlook folders, because filtering by tags was not easy, but I'd rather one large list of mails, neatly tagged so I can easily filter. I'd love being able to select mails by tags (eg in a click or too (could be a tab) show all mails tagged with "software") Create "tagging rules", such as "if the mail was sent to this address, add this tag", or "if the body contains ..., add that tag" Sync contacts with Gmail, handle tasks (syncing with toodledo would be awesome), possibly provide a calendar Create e-mail templates, signatures... Other ideas: A timeline, scripting support, being able to import MS Outlook emails, provide a nice backup format... Thanks for sharing ideas and suggestions!

    Read the article

  • Replacement for public folder workflow, I'm confused as to how sharepoint does it.

    - by RodH257
    For years Microsoft has been slowly phasing out public folders, perhaps exchange 2010 really is the LAST TIME they'll be shipped... I've heard sharepoint is the replacement, but I don't understand full, can someone give me an idea of how to replace this workflow? In our office, we have projects, they have a project number, ie 10353. Each job folder has a public folder, organized in a hierachy like Projects Year Folder Subfolders The main subfolder we use is for genera correspondence. When an email is received that relates to a project, it is dragged and dropped (or right click move to) a public folder. Adding public folder favourites for each user helps this. When an email is sent, we have a custom email form, which is the default email form, but with a project number field next to the subject line. When you enter the job number in there, it carbon copies our filing system in, which reads the job number and puts the email in the public folder for you. if you need to refer to emails, you go to public folder and find them there. This isn't the best with large jobs, but it works ok. Now, I have limited experience with sharepoint (well, WSS), we've used it to do some neat discussion boards/polls etc as an intranet site, but I haven't seen much of its integration with outlook. The great thing about our solution is how tightly it integrates with outlook which is exactly where the emails are. If you want to forward an old email, you go to public folder and forward it, simple. Any solution that replaces it should be at least as easy as this. Improvements we would like would be to have better searching of emails, better support in exchange (ie future version) and also, custom forms in outlook are being phased out (the VBA kind), so avoiding these would be good. Does sharepoint do this? or what solutions do this kind of thing?

    Read the article

  • Cognos 8.3 - date prompt macro problem

    - by Jacob
    In Report Studio 8.3, I've got this raw SQL query running against a MySQL 5.1 data source: SELECT enc.encounterID, enc.date FROM enc WHERE enc.date between #prompt('textPromptStartDate')# AND #prompt('textPromptEndDate', 'date')# This produces text prompts for the user. If the user enters dates into these prompts in the format of 'YYYY-MM-DD', e.g. '2010-01-15', the query works fine. But I want to replace the text prompts with proper Date prompts. When I try replacing the above prompts with #prompt('datePromptStartDate', 'date') AND #prompt('datePromptEndDate', 'date')# the query runs (no errors are generated), but I get an empty result set. I have a feeling I need to adjust the date format that the date prompt macro returns, but I'm stuck after many hours of experimentation as to how to debug this.

    Read the article

  • Libreoffice Calc run macro with HYPERLINK

    - by Kurt Borno
    I'm trying to use hyperlinks instead of buttons to run Basic macros. It seems to be more natural to me because hyperlinks are directly connected to a cell and buttons are not. I'm using the following Formula: =HYPERLINK("vnd.sun.star.script:Standard.Module1.Test?language=Basic&location=document";"Check") It should call the Subroutine Test placed in the document's macros under Standard.Module1 and display the Text 'Check' in the Cell it is written. This works absolutely fine with libreoffice 3.6.1.2 but it doesn't work at all with version 4.1.4.2. I can't see any errors it just happens nothing at all. I tried to simply click the Hyperlink and also to hold CTRL and click it. Same result - nothing. When I use a button the macro works as expected. Does anyone know how to solve this problem?

    Read the article

  • How do you perform macro expansion within #ifdef?

    - by Malvineous
    Hi all, I have some fairly generic code which uses preprocessor macros to add a certain prefix onto other macros. This is a much simplified example of what happens: #define MY_VAR(x) prefix_##x "prefix_" is actually defined elsewhere, so it will be different each time the file is included. It works well, but now I have some code I would like to skip if one of the tokens doesn't exist, but this doesn't work: #if defined MY_VAR(hello) What I want it to expand to is this: #ifdef prefix_hello But I can't figure out how. I need to use the MY_VAR() macro to do the expansion, so I can't just hardcode the name. (It's actually for some testing code, the same code gets included with a different prefix each time to test a bunch of classes, and I want to skip a couple of tests for a handful of the classes.) Is this possible with the C++ preprocessor?

    Read the article

  • Use a "User Macro" in .vcproj RelativePath

    - by Tom Leys
    Inside .vcproj files There is a list of all source files in your project. How can we use a macro to specify the path to a source file? If we do this: <File RelativePath="$(Lib3rdParty)\Qt\qtwinmigrate-2.5-commercial\src\qmfcapp.cpp"> </File> The compiler cannot find the folder: qmfcapp.cpp c1xx : fatal error C1083: Cannot open source file: '.\$(lib3rdparty)\qt\qtwinmigrate- 2.5-commercial\src\qmfcapp.cpp': No such file or directory As you can see, our project compiles in several source files from QT. QT lives inside a folder of external libraries, and we don't want hardcode the path from our project to that folder (we have a very large solution)

    Read the article

  • Excel macro send rich mail using LotusNotes

    - by CC
    Hi everybody. I'm working on a small macro to send mail from excel 2007 using my Lotus Notes session. The sending mail part is working fine. Now I need to send in the body part, a part of a stylesheet (for instance the area from A1:B20). This area has colors, bold font. To send my email here is the code: Set oSess = CreateObject("Notes.NotesSession") Set oDB = oSess.GETDATABASE("", "") Call oDB.OPENMAIL flag = True If Not (oDB.IsOpen) Then flag = oDB.Open("", "") If Not flag Then MsgBox "Can't open mail file: " & oDB.SERVER & " " & oDB.FILEPATH End If On Error GoTo err_handler 'Building Message Set oDoc = oDB.CREATEDOCUMENT Set oItem = oDoc.CREATERICHTEXTITEM("BODY") oDoc.Form = "Memo" 'mail subject oDoc.Subject = "subject" 'mail body oDoc.sendto = "[email protected]" oDoc.body = "my text" oDoc.postdate = Date oDoc.SaveMessageOnSend = True oDoc.visable = True 'Sending Message oDoc.SEND False Does anybody has an idea about how to send a stylesheet ? Thanks alot.

    Read the article

  • Pros and Cons of Different macro function / inline methods in C

    - by Robert S. Barnes
    According to the C FAQ, there are basically 3 practical methods for "inlining" code in C: #define MACRO(arg1, arg2) do { \ /* declarations */ \ stmt1; \ stmt2; \ /* ... */ \ } while(0) /* (no trailing ; ) */ or #define FUNC(arg1, arg2) (expr1, expr2, expr3) To clarify this one, the arguments are used in the expressions, and the comma operator returns the value of the last expression. or using the inline declaration which is supported as an extension to gcc and in the c99 standard. The do { ... } while (0) method is widely used in the Linux kernel, but I haven't encountered the other two methods very often if at all. I'm referring specifically to multi-statement "functions", not single statement ones like MAX or MIN. What are the pros and cons of each method, and why would you choose one over the other in various situations?

    Read the article

  • Visual Studio 2008 Macro for Building does not block thread

    - by Climber104
    Hello, I am trying to write a macro for Building my application, kicking off an external tool, and ataching the debugger to that external tool. Everything is working except for the building. It builds, but it is not blocking the thread so the external tool gets kicked off before it can finish. Is there a way I can run ExecuteCommand and wait for the thread to finish? Code is below: DTE.ExecuteCommand("ClassViewContextMenus.ClassViewProject.Build") DTE.ExecuteCommand("Tools.ExternalCommand11") Try Dim dbg2 As EnvDTE80.Debugger2 = DTE.Debugger Dim trans As EnvDTE80.Transport = dbg2.Transports.Item("Default") Dim dbgeng(1) As EnvDTE80.Engine dbgeng(0) = trans.Engines.Item("Managed") Dim proc2 As EnvDTE80.Process2 = dbg2.GetProcesses(trans, "MINIPC").Item("_nStep.exe") proc2.Attach2(dbgeng) Catch ex As System.Exception MsgBox(ex.Message) End Try

    Read the article

  • Visual Studio Macro: How to perform "File -> Save All" programatically

    - by Sean B
    I am looking for the equivalent of running "File - Save All" before certain Rake macros. What I have so far is: Private Sub Pre_Rake() Dim i As Integer DTE.Documents.SaveAll() For i = 1 To DTE.Solution.Projects.Count If Not DTE.Solution.Projects.Item(i).Saved Then DTE.Solution.Projects.Item(i).Save() End If Next End Sub DTE.Documents.SaveAll works fine, but the for loop does not save the project files as I would expect. If I make a copy of a file in the solution explorer, that file is not included in the project file (.CSPROJ) after Pre_Rake() runs. I would still have to press CTRL-SHIFT-S or File - Save All. So, how to Save All with a Visual Studio Macro?

    Read the article

  • use MACRO __FUNCTION__ with inline function

    - by Kurzack
    Hi all, I want to add debug message in kmalloc function in linux kernel. So my goal is to print all functions that call kmalloc. I tried to add printk("caller : %s size : %d",FUNCTION, size); in kmalloc function in slab.h but, the result of FUNCTION is kmalloc itself. I realised that MACRO is processed first before inline function (fyi, kmalloc is an inline function). Now, my question is, what is the simplest way to add debug message to kmalloc? Thanks in advance guys.

    Read the article

  • Declaration for object for which creation is wrapped in macro

    - by learner
    The following macro is defined in our code: #define MSGMacro(obj, arg) MyPaymentClass obj(arg) Where MSGMacro is used to creates the object of type MyPaymentClass using code like MSGMacro(Card, 1); MSGMacro(Cash, 2); ---- ---- //removed unwanted things to keep question cleaner. All the above code is in one cpp file, Now the problem is how we can expose these two objects of MyPaymentClass to other units in my project? i.e. I want to use Card and Cash in other CPP files. Please suggest how I can give the declaration for the same in some header file?

    Read the article

  • Excel Macro to find text in cell and insert hyperlink on cell

    - by tnriverfish
    We're managing some system bugs in a web system and setting priority for execs in a spreadsheet. Each of the tickets has a "FD-" and four numbers as the ID. The web system has a hyperlink that has that "FD-####" at the end of the link. The end result would look like this -- http://www.mytickets.com/FD-#### I'd like to run a macro that finds all the FD-#### and inserts a hyperlink on each. There may be multiple FD-#### in a single cell and there will certainly be other text in there. I'd go through each and add the link but there are over 150 or so. Thanks!

    Read the article

  • Windows Macro + Hot Key - Paste Without Formatting

    - by JasonStoltz
    Not sure if this appropriate to put as a question or not? It's sort of a scripting question I think. Just down vote me if not :p Basically, what I'm looking for is a way to push a windows hotkey and have whatever text is in the clipboard be stripped of formatting. An example of what the macro could do: I push (whatever hotkey combo here) open notepad.exe Paste to notepad from clipboard Select all text in notepad Copy/Cut all text from notepad Close notepad I'm just wondering if someone has done something like this before, or knows how it could be accomplished. I think this could be a huge time-saver for almost anyone. I find myself doing this all the time when cutting and pasting between different office applications, etc.

    Read the article

  • Typechecking macro arguments in C

    - by Rocketmagnet
    Hi all, Is is possible to typecheck arguments to a #define macro? For example: typedef enum { REG16_A, REG16_B, REG16_C }REG16; #define read_16(reg16) read_register_16u(reg16); \ assert(typeof(reg16)==typeof(REG16)); The above code doesn't seem to work. What am I doing wrong? BTW, I am using gcc, and I can guarantee that I will always be using gcc in this project. The code does not need to be portable.

    Read the article

  • define macro in C wont work

    - by Spidfire
    Im trying to make a macro in C that can tell if a char is a hex number ( 0-9 a-z A-Z) #define _hex(x) (((x) >= "0" && (x) <= "9" )||( (x) >= "a" && (x) <= "z") || ((x) >= "A" && (x) <= "Z") ? "true" : "false") this what ive come up with but it wont work with a loop like this char a; for(a = "a" ; a < "z";a++){ printf("%s => %s",a, _hex(a)); } but it gives a error test.c:8: warning: assignment makes integer from pointer without a cast test.c:8: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer test.c:9: warning: comparison between pointer and integer

    Read the article

  • Converting a macro to an inline function

    - by Rob
    I am using some Qt code that adds a VERIFY macro that looks something like this: #define VERIFY(cond) \ { \ bool ok = cond; \ Q_ASSERT(ok); \ } The code can then use it whilst being certain the condition is actually evaluated, e.g.: Q_ASSERT(callSomeFunction()); // callSomeFunction not evaluated in release builds! VERIFY(callSomeFunction()); // callSomeFunction is always evaluated Disliking macros, I would instead like to turn this into an inline function: inline VERIFY(bool condition) { Q_ASSERT(condition); } However, in release builds I am worried that the compiler would optimise out all calls to this function (as Q_ASSERT wouldn't actually do anything.) I am I worrying unnecessarily or is this likely depending on the optimisation flags/compiler/etc.? I guess I could change it to: inline VERIFY(bool condition) { condition; Q_ASSERT(condition); } But, again, the compiler may be clever enough to ignore the call. Is this inline alternative safe for both debug and release builds?

    Read the article

  • Eliminating inherited overlong MACRO

    - by ExpatEgghead
    I have inherited a very long set of macros from some C algorithm code.They basically call free on a number of structures as the function exits either abnormally or normally. I would like to replace these with something more debuggable and readable. A snippet is shown below #define FREE_ALL_VECS {FREE_VEC_COND(kernel);FREE_VEC_COND(cirradCS); FREE_VEC_COND(pixAccum)..... #define FREE_ALL_2D_MATS {FREE_2D_MAT_COND(circenCS); FREE_2D_MAT_COND(cirradCS_2); } #define FREE_ALL_IMAGES {immFreeImg(&imgC); immFreeImg(&smal..... #define COND_FREE_ALLOC_VARS {FREE_ALL_VECS FREE_ALL_2D_MATS FREE_ALL_IMAGES} What approach would be best? Should I just leave well alone if it works? This macro set is called twelve times in one function. I'm on Linux with gcc.

    Read the article

  • Change macro in VisualStudio

    - by Vaccano
    The macro 'propdp' creates a dependency property like this: public int MyProperty { get { return (int)GetValue(MyPropertyProperty); } set { SetValue(MyPropertyProperty, value); } } // Using a DependencyProperty as the backing store for MyProperty. This enables animation, styling, binding, etc... public static readonly DependencyProperty MyPropertyProperty = DependencyProperty.Register("MyProperty", typeof(int), typeof(ownerclass), new UIPropertyMetadata(0)); I would like to change it a bit. To look like this: public int MyProperty { get { return (int)GetValue(MyPropertyProperty); } set { SetValue(MyPropertyProperty, value); } } public static readonly DependencyProperty MyPropertyProperty = DependencyProperty.Register("MyProperty", typeof(int), typeof(ownerclass), new UIPropertyMetadata(0)); Can this be done? Does anyone know where to change this?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >