Search Results

Search found 3593 results on 144 pages for 'wake on lan'.

Page 53/144 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • USB devices don't work after restoring from Stand By

    - by Steve
    Hi. I'm running Windows XP SP3 on a NEC Versa L1100 laptop. If I wake my laptop up from Stand By, no attached USB devices will function. Device Manager shows all USB entries to be working properly. There is an option to "Allow the computer to turn off this device to save power" in the Power Management properties of USB entries. Is this causing the issue or something else? I have the latest drivers for my motherboard installed.

    Read the article

  • windows 7 virtual wireless adapter keeps going to sleep

    - by conners
    Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

    Read the article

  • Samsung series 7 Chronos. Linux compability

    - by foxy
    this might be strange for some people to hear, but I want to buy Samsung Chronos notebook and install Ubuntu alongside with Windows. And I want to know if there could be any trouble with hardware? I mean if all the ports should work fine, keyboard special buttons, lights on keyboard, this fast boot technology (wake from hibernation in few seconds), etc. Thank you for attention and forgive me if this question sounds weird for some of you.

    Read the article

  • After turning off my monitor, the computer won't display again

    - by Nick Lassonde
    If I physically turn off the monitor (DVI connection) and then turn it back on, the connection does not wake back up. The monitor enters "Power Saving" mode. I've tried unplugging the DVI cable and plugging back in, I've tried updating the video card drivers (it's Windows Vista; Windows 7 failed to install on this machine). I can use VNC to connect to the machine again, and after a reboot, the monitor works again. Does anyone have any idea?

    Read the article

  • How can I bring my IBM T60 out of sleep mode?

    - by Xavierjazz
    XP Pro - SP3. My IBM Thinkpad t60 goes into sleep, or hibernation? and I cannot wake it up, no matter what keys I press. This includes pressing Fn plus F4 ( with the half moon). The only method I've found is to do a hard reset, and this causes other problems. Is there another way? Thanks for any direction.

    Read the article

  • CodePlex Daily Summary for Sunday, May 09, 2010

    CodePlex Daily Summary for Sunday, May 09, 2010New ProjectsArtificial Spy: ASPX, C#, XML, This is big project for creation application for: People Search. People connection. Background check. Crime Prevention. Socia...Chef Framework: CHEF: CSS, HTML, Events, & Functions. Is a collection of libraries to help build concerns separated websites.Crabit Full File Manger: File manager SystemEPiMVC - EPiServer CMS with ASP.NET MVC: A framework for using EPiServer CMS with ASP.NET MVC.Fimyid IX: all My projects In ONE!Hosting Folder Sizes: When you run a hosting environment with the ability to upload files, and you're charging per gigabyte per month, you need quick statistics about di...Let's Up: A tool that breaks you every 50 minutes to protect your health.MediaXenter: MediaXenterMSClub BY: Microsoft community web-site projectOrbisArca: Windows Mobile gameSpatial Gateway: A common and standardized way of accessing spatial data stored in different datastores. This also includes functionality for replication across dif...Squiggle - A Free open source Lan Messenger: Squiggle is a free lan messenger that does not require a server. Just download and run it and you're ready to talk to everyone on your lan. Squi...Video Downloader: Video Downloader makes it easier for developers to generate download links for videos from You-Tube. You'll no longer have to search through source...ViewModelSupport: This is not an MVVM framework. It is just the base class I use to reduce the friction when writing ViewModels. Making it public to share my ideas.WPF CCTV Surveillance Control with IP Cameras.: Integracion de Video IP en WPF. IP Camera. WPF dinamic Control and Events in Video System. Surveillance system. CCTV system. .NetNew Releases.NET Extensions - Extension Methods Library: Release 2010.07: Added some extension methods for ICollection<T> and IList<T> for demonstrating the differences between both interfaces: - ICollection<T>.AddRangeU...bitly.net: bitly.dll: This is a .net DLL that works with the on-line URL shortening service bit.ly Compiled using .net 4.0 but the source code should run with version 2 ...Crabit Full File Manger: Crabit V1.0: Firts file manager system previewCSharp Intellisense: V1.9: this is a major release that was focus on bug fix, tooltip support and styling.Fimyid IX: fimyid ix 1.0: New Liscence!Gherkin editor: Beta: Added support for i18n (all languages supported by Gherkin/Cucumber are suported). Removed auto-completion of statements like As a user and followi...Grunty OS: GruntyOSAlphaSC: Grunty os sourceHKGolden Express: HKGoldenExpress (Build 201005081830): New features: Users can post new message or reply to a message. Special thanks for help from members 劉佳偉 (ID: 179892) and Maize. (ID: 142974). Bu...iLove SharePoint: Lookup Field with Picker 2010: Just forget the fuc**** dropdowns! Requirements: SharePoint Foundation 2010 Features * Single- and multi-Selection Mode * Search in pick...LazyNet: LazyNet Beta 2: Refresh Network Bug fixed.LazyNet: LazyNEt_Beta3: Beta 3 Release, Better Network RefreshingLazyNet: LazyNetBeta3_SRC: Refresh NetworkLet's Up: 1.0 (Build 100509): This is the first versionLive Distributed Objects: Windows Installer r48444 (2010-05-08): current development snapshotMDownloader: MDownloader-0.15.12.58576: Fixed presenting Hotfile's captcha. Fixed FilesTube searching. Fixed determining Rapidshare postpone period. Fixed minor bugs.NSIS Autorun: NSIS Autorun 0.1.7: This release includes source code, executable binaries and example materials.SharpDevelop: SharpDevelop 3.2: Release notes: http://community.sharpdevelop.net/forums/t/11165.aspxSilverlight SDK for Bing: Silverlight SDK for Bing 1.4: Build for Visual Studio 2010 and Silverlight 4 Issues Addressed10337 10342 10367 10804 10805 10806 10807 DownloadsSilverlight SDK For B...sqwarea: Sqwarea 0.0.252.0 (alpha): This release corrects a critical bug in Persistence.GameProvider.GetNextKingId. We strongly recommend you to upgrade to this version.Stratosphere: Stratosphere 1.0.5.1: Added many features to Amazon Web Services Shell (AwsSh) Improved scalable table reader for SimpleDB multi-valued attributes Added more functio...TechEdOneNoter: TechEdOneNoter verison 2010.5.9.2010: TechEdOneNoter is a utility to create OneNote Pages based on sessions selected in the TechEd North America 2010 Session Builder. This is the first...Video Downloader: Version 1.0: Version 1.0 See Home Page for usage and more information. Please remember changes at You-Tube can prevent this software from working.Visual Studio - Lua Language Support: May 8th Update: Release NotesThis release adds collapsible functions and tables. What's new:Collapsible functions and tables Using latest version of Irony Maj...WPF CCTV Surveillance Control with IP Cameras.: Hungry Foxx CCTV Preview: Este release, corresponde a una muestra del programa completo. La idea es poder contar con una solucion para los integradores de sistemas CCTV o d...XsltDb - DotNetNuke XSLT module: 01.01.08: Bugs fixed: 17204 17203 Many new features, but undocumented yet. I'm going to update docs in a week or two, but...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesASP.NETPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrThe Information Literacy Education Learning Environment (ILE)AJAX Control FrameworkCaliburn: An Application Framework for WPF and SilverlightMirror Testing SystemjQuery Library for SharePoint Web Servicespatterns & practices - UnityBlogEngine.NETTweetSharp

    Read the article

  • Uploading to my local server is slower than downloading from the Internet

    - by Olivier Lalonde
    I have a home Ubuntu server that I use for storage. I have mounted a sftp share on my laptop to access my server but the upload speed I get is very slow (~400kb/s) compared to speeds I usually get when downloading through Bittorrent (~800kb/s). It's kind of weird... I should get higher speeds on a LAN than on the Internet... How can I speed up uploads to my server and how can I troubleshoot where the bottleneck is?

    Read the article

  • Atheros AR9285 / Lenovo G560 wireless not working after installing 13.04

    - by teyi
    I had Ubuntu 12.04 initially installed on my laptop. I upgraded to 12.10 then 13.04. Everything worked fine, including wireless. After adding a new memory card ( I only had 2 gb and one memory slot free) my wireess stopped working. I backed up all my data and reinstallled Ubuntu 13.04. Everything works fine except wireess. I bought this laptop in 2010 from Japan. It has Intel Core i5 CPU M 450 @2.40 Ghz * 4 3,7 Gb RAM os type 64 bit The output of iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off The output of rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no The output of lshw -C network: *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:7d:fe:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.8.0-19-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d6400000-d640ffff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:2b:36:ac size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff The wi-fi network appears as disconnected ( it's greyed out) Strangely enough I see a wifi network ( not mine) but not mine or the rest. That network doesn't require a password . I click on it, try to connect and i get an error message: failed to connect to xxxxx ... 32) The access point/org/freedesktop/NetworkManager/AccessPoint/0 was not in the scan list. Someone help please

    Read the article

  • access localhost from other PC

    - by user109694
    I'm fresher for ubuntu 12.04.., I just created a simple program called login.php and i would like to run this prog from anther PC that not in my LAN. I had localhost in my system., I'm using apache2.0 and php5. My program is located at var/www/login.php When ever i'm trying to open it from others PC(not in my network) using IP it shoes OOPS., What can i do to open my page from another PC using IP address.

    Read the article

  • How do I install drivers for the Atheros AR8161 Ethernet controller?

    - by Jessica Burnett
    I have installed Ubuntu 12.04-64 bit on my Lenovo IdeaPad laptop, and the wired Ethernet (LAN) connection doesn't work. Running the lspci -vv | grep Atheros command from the terminal shows me I have the AR8161 Gigabit Ethernet controller: 02:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 08) This looks like a new product whose drivers are not built into Ubuntu. How do I install drivers to get the AR8161 working?

    Read the article

  • Acer Wireless Network not working

    - by pico
    I installed Ubuntu 12.04 64 Bit desktop version in acer AspireE1-470. Everything work great except Wireless and touch pad. When i run additional driver there nothing to activate and when i run "rfkill list" it's show 0: hci0:bluetooth Soft blocked: yes Hard Blocked: no 1: acer-wireless: Wireless Lan Soft blocked: no Hard blocked: no I don't know too much command in linux and i hv no i ieda hot to work wireless and touch-pad

    Read the article

  • Installing Gnome Classic on Ubuntu Server 12.04.1 64bit

    - by varunyellina
    I've installed Ubuntu Server Edition and setup open ssh,samba and lamp on my home desktop just to work on LAN. I also want setup a GUI on it for daily use. I've already performed the following sudo apt-get install gnome-session-fallback sudo apt-get install lightdm-gtk-greeter sudo apt-get install xinit I don't want to install Unity or the Gnome3 Shell on my system. Also I haven't found instructions to installing gnome-classic on a server edition(although it shouldn't make a difference).How do I get it to work?

    Read the article

  • Wireless acting weird ubuntu 12.04 LTS

    - by Philip Yeldhos
    I'm kinda new here, so please bear with me. My wireless driver is acting very weird. It shows my router's name, but when it is connecting (after entering the correct password), the icon on the tray is like, refreshing every once in a second, while showing the animation that it is connecting. And after a few seconds, error message come up saying that wireless network is disconnected. I installed the drive through "additional drivers". What info do you need? Somebody please help. philip@philip-HP-Mini-110-3100:~$ sudo iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.472 GHz Access Point: Not-Associated Bit Rate:72 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:11 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. here's what lspci -v gave me: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1483 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at 52000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-82-ff-ff-3f-e0-2a Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac okay, i removed the driver additional drivers gave me. now, this is what has happened: lsmod gave me: philip@philip-HP-Mini-110-3100:~$ lsmod | grep brc brcmsmac 540875 0 mac80211 436455 1 brcmsmac brcmutil 14675 1 brcmsmac cfg80211 178679 2 brcmsmac,mac80211 crc8 12781 1 brcmsmac cordic 12487 1 brcmsmac and iwconfig gave me: philip@philip-HP-Mini-110-3100:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. and lspci -v gave me: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1483 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at 52000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

    Read the article

  • Bluetooth firmware problem in Ubuntu 13.04

    - by chanzerre
    I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

    Read the article

  • Wireless keeps asking for password

    - by Lewis
    Hia I just installed 12.04 on my old ibook G3 (since i wiped the HDD) Now luckely i have a wifi-ethernet bridge on my pc to give the ibook intertnet but even when it is connected to eth0 (LAN) it keeps asking to connect to eth1(Wi-Fi) the router is using WPA2 Personal with AES I was just wondering, bescuse the router is upsatirs and the ibook is downstairs next to my PC. and the wifi connects upstairs, but I can't use it up there 'cos the batteiy is junk and i got no plugs that'll reach. Thanks in advance Lewis

    Read the article

  • Automate Your Google Analytics Reporting with Apps Script

    Automate Your Google Analytics Reporting with Apps Script Do you rely on Google Analytics reporting to make sure you're making the most of your web traffic? Does your current process for exporting and analyzing your Analytics data feel clunky? Join Nick Mihailovski and Ikai Lan from the Analytics and Apps Script teams to learn how to integrate Google Analytics with Apps Script and save your sanity in the process. From: GoogleDevelopers Views: 0 2 ratings Time: 30:00 More in Science & Technology

    Read the article

  • Network Administrators Past, Present, and Future

    Even in the short time that PCs have been signficantly networked, what it means to be a SysAdmin has changed dramatically. From the first LAN parties to the lumbering infrastructures of today, the role of SysAdmin has evolved and adapted to the shifting needs of users and corporations alike. Brien Posey has been on the front line of it all, and considers the future of this thus-far essential IT role.

    Read the article

  • Why wifi doesn't work in this case?

    - by xRobot
    I have a brand new notebook where I have installed Windows 7 and Ubuntu 12.04 LTS 64bit in dual boot. In windows 7 wifi works but in Ubuntu not. Could you help me please ? iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: b4:b5:1f:1b:9a:56 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:3000(size=256) memory:c2404000-c2404fff memory:c2400000-c2403fff *-network description: Wireless interface product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 84:4b:f4:0a:3a:22 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-31-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:c2500000-c250ffff lspci | grep -i net 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 02:00.0 Network controller: Ralink corp. Device 539a iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Device or resource busy eth0 Interface doesn't support scanning. lsmod Module Size Used by rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224173 1 joydev 17693 0 hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 97362 0 snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device arc4 12529 2 rt2800pci 18715 0 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 51144 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib soundcore 15091 1 snd mac_hid 13253 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev wmi 19256 1 hp_wmi i915 473240 3 cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 serio_raw 13211 0 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 rfkill list: # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • SSH from external network refused

    - by wulfsdad
    I've installed open-ssh-server on my home computer(running Lubuntu 12.04.1) in order to connect to it from school. This is how I've set up the sshd_config file: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for #Port 22 Port 2222 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH #LogLevel INFO LogLevel VERBOSE # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net Banner /etc/sshbanner.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes #specify which accounts can use SSH AllowUsers onlyme I've also configured my router's port forwarding table to include: LAN Ports: 2222-2222 Protocol: TCP LAN IP Address: "IP Address" displayed by viewing "connection information" from right-click menu of system tray Remote Ports[optional]: n/a Remote IP Address[optional]: n/a I've tried various other configurations as well, using primary and secondary dns, and also with specifying remote ports 2222-2222. I've also tried with TCP/UDP (actually two rules because my router requires separate rules for each protocol). With any router port forwarding configuration, I am able to log in with ssh -p 2222 -v localhost But, when I try to log in from school using ssh -p 2222 onlyme@IP_ADDRESS I get a "No route to host" message. Same thing when I use the "Broadcast Address" or "Default Route/Primary DNS". When I use the "subnet mask", ssh just hangs. However, when I use the "secondary DNS" I recieve a "Connection refused" message. :^( Someone please help me figure out how to make this work.

    Read the article

  • Multi subnet in ubuntu with dnsmasq

    - by Fox Mulder
    I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

    Read the article

  • Button "Add" is disabled in VPN Connection's dialog

    - by Innuendo
    I've just installed elementaryos-jupiter. (It's based on Ubuntu 10.10) I've entered VPN Connections' menu (nm - VPN Connections - Configure VPN) And there should be button "Add" - it is, but it's disabled (I can't press on it) I'm connecting via ethernet (LAN in a students' hostel) and we get internet via VPN connection (It worked for me in Ubuntu for a few years) Any suggestions? I've asked on IRC of elementaryos (there were few people) but they said that VPN is out-of-box, and it should work - they never met this.

    Read the article

  • Path of Replication

    - by geeko
    I'm currently developing a replication system to keep data in-synch between an arbitrary number of servers. Some of these servers exist in one cluster on one LAN. Others exist somewhere else in the world. I'm wondering what are the pros/cons of different paths that we choose to flow replicated data on between servers? In other words, what are the different strategies to load balance the replication process ?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >