Search Results

Search found 15906 results on 637 pages for 'scott and the dev team'.

Page 530/637 | < Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >

  • Them and us

    - by Plip
    As much as we try and create inclusive societies throughout the globe time and time again we revert to our tribal and clan origins back in the distant past, be those line split across the obvious like  Nationality, Religion or even the Football teams we follow. Microsoft to me has always been a “them”. I was always on the outside looking in, free to say as I wished and have an external objective viewpoint. Now, after my first week (well four days but who’s counting) Microsoft is an “us” for me. So when I look up in the Atrium of Building 1 at Microsoft’s UK headquarters I see banners like the one above and I already genuinely feel a part of this much bigger community. I looked up at that and I felt a sense of pride to be part of something bigger, something which is out there touching peoples lives everywhere (for the good and the bad). My objectivity has made me who I am today. I’m open to other ideas and concepts, I’ve worked hard to be understanding across the board be it from technology through to cultural differences in my life and it’s vital to me that I preserve that so I now have to learn how I balance the “them” of Microsoft to the “us” of Microsoft and maintain the objectivity. It’s my job to advise people on the best way to do things, which won’t always mean “Use Microsoft Technology X”, sometimes it’ll be my responsibility to say “Don’t use Microsoft Technology X”. My first and foremost responsibility is to the customer, to give them the best advice that I can and I want to maintain that. Yeah, I’m sure I’ll be tarred by some as a Microsoft guy, for many years I’ve had just that, but those out there in the non Microsoft communities I’ve engaged in I think know that I’m the first to say when I think something is a bit naff. So, here’s my ask to you ‘the community’. Keep me honest. If I start to sound like a fanboi I want you to find me and give me a slap. It’s all too easy to forget reality sometimes and I want to make sure I stay well and truly routed in that reality. Also, no matter how much I embed myself within Microsoft I fear I will never understand Microsoft’s marketing team. In the Gents just under the WP7 banner shown above I was faced with this. Draw your own conclusions on what it’s message is.

    Read the article

  • PeopleSoft Grants & the Federal Agency Letter of Credit Draw Changes

    - by Mark Rosenberg
    For decades, most, if not all, US Federal agencies that sponsor research allowed grant recipients to request and receive payments using pooled accounts, commonly known as pooled letter of credit (LOC) draws. This enabled organizations, such as universities and hospitals, fast and efficient access to reimbursement of the expenditures they incurred conducting research across a portfolio of grants. To support this business practice, the PeopleSoft Grants solution has delivered an LOC Draw report to provide the total request amount along with all of the supporting invoice details for reconciliation and audit purposes. Now, in an attempt to provide greater transparency, eliminate fraud, strengthen accountability for grant-related financial transactions, and simplify grant award closeout, many US Federal sponsors are transitioning from the “pooling” letter of credit draw method to requesting on a “grant-by-grant” basis. The National Science Foundation, the second largest issuer of Federal awards, already transitioned to detailed grant draws in 2013. And, in response to the U.S. Department of Health and Human Services (HHS) directive to HHS-supported Agencies, the largest Federal awards sponsor, the National Institutes of Health (NIH), will fully transition to the new HHS subaccount draw method. This will require NIH award recipients to request payments based on actual expenses incurred on an award-by-award basis. NIH is expected to fully transition to this new draw method by the end of Federal fiscal year 2015.  (The NIH had planned to fully transition to this new method by the end of fiscal 2014; however, the impact to institutions was deemed to be significant enough that a reprieve was recently granted.) In light of these new Federal draw requirements, we have recently released these new features to aid our customers on both PeopleSoft Grants releases 9.1 and 9.2:1. Federal Award Identification Number on the Proposal and Award Profile 2. Letter of credit fields on contract lines to support award basis draws and comply with Federal close out mandates3. Process to produce both pro forma and final LOC Draw Reports in BI Publisher report format4. Subacccount ID field on the LOC Summary and a new BI Publisher version of the LOC Summary report 5. Added Subaccount Field and contract info to be displayed on the LOC summary page6. Ability to generate by a variety of dimensions pro forma and invoiced draw listings 7. Queries for generation and manipulation of data to upload into sponsor payment request systems and perform payment matching8. Contracts LOC Close Out query to quickly review final balances prior to initiating final draws and preparing Federal Financial Reports prior to close The PeopleSoft Development team actively monitors this and other major Federal changes and continues working closely with the Grants Product Advisory Group of the Higher Education User Group to ensure a clear understanding of what our customers need in order to transition to new approaches for doing business with the Federal government. For more information regarding the enhancements to the PeopleSoft Grants solution, existing customers can login to My Oracle Support and review the Enhancements to Letter of Credit Process (Doc ID 1912692.1) associated with resolution ID 904830. This enhanced LOC functionality is available in both PeopleSoft FSCM 9.1 Bundle #31 and PeopleSoft FSCM 9.2 Update Image 8.

    Read the article

  • eSTEP Newsletter for October 2013 now available

    - by uwes
    Dear Partners,We would like to let you know that the October'13 issue of our Newsletter is now available.The issue contains information on the following topics: Oracle Open World Summary Oracle Cloud: Oracle Engineered Systems Oracle Database and Middleware Oracle Applications and Software as a Service Oracle Industries Oracle Partners and the "Internet of Things" JavaOne News MySQL News Corporate News Create Your HR Strategic Vision at Oracle HCM World Oracle Database Protection Redefined A Preview: Oracle Database Backup Logging Recovery Appliance Oracle closed Tekelec acquisition Congratulations to ORACLE TEAM USA! Tech sectionARC M6 Oracle's SPARC M6 Oracle SuperCluster M6-32 - Oracle’s Most Scalable Engineered System Oracle Multitenant on SPARC Servers and Oracle Solaris Oracle Database 12c Enterprise Edition: Plug into the Cloud Oracle In-Memory Database Cache Oracle Virtual Compute Appliance New Benchmark-Results published (Sept. 2013) Video Interview: Elasticity, the Biggest Challenge Facing Data Centers Today Tech blog Announcing New Sun Storage 2500-M2 Drives SPARC Product Line Update ZFS RAID Calculator v6 What ships with ODA X3-2? Tech Article: Oracle Multitenant on SPARC Servers and Oracle Solaris New release of Sun Rack II capacity calculator available Announcing: Oracle Solaris Cluster Product Bulletin, September 2013 Learning & events Planned TechCasts Quarterly Partner Update Live Webcast: Simplify and Accelerate Oracle Database deployment with Oracle VM Templates Join us for OTN's Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence.Learn from OOW 2013 what is going on in Virtualization How to Implementing Early Arriving Facts in ODI, Part I and Part II: Proof of Concept Overview Multi-Factor Authentication in Oracle WebLogic Using multi-factor authentication to protect web applications deployed on Oracle WebLogic. If Virtualization Is Free, It Can't Be Any Good—Right? Looking beyond System/HW SOA and User Interfaces Overcoming the challenges to developing user interfaces in a service oriented References Vodafone Romania Improves Business Agility and Customer Satisfaction, with 10x Faster Business Intelligence Delivery and 12x Faster Processing Emirates Integrated Telecommunications Captures 47% Market Share in a Competitive Market, Thanks to 24/7 Availability Home Credit and Finance Bank Accelerates Getting New Banking Products to Market Extra A Conversation with Java Champion Johan VosYou can find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

    Read the article

  • How to manage a Closed Source High-Risk Project?

    - by abel
    I am currently planning to develop a J2EE website and wish to bring in 1 developer and 1 web designer to assist me. The project is a financial app with a niche market. I plan to keep the source closed . However, I fear that my would-be employees could easily copy the codebase and use it /sell it to a third party especially when they switch jobs. The app development will take 4-6months and perhaps more and I may have to bring in people after the app goes live. How do I keep the source to myself. Are there techniques companies use to guard their source. I foresee disabling pendrives and dvd writers on my development machines, but uploading data or attaching the code in one's mail would still be possible. My question is incomplete. But programmers who have been in my situation, please advice. How should I go about this? Building a team, maintaining code-secrecy,etc. I am looking forward to sign a secrecy contract with the employees if needed too. (Please add relevant tags) Update Thank you for all the answers. I certainly won't be disabling all USB ports and DVD writers now. But I think I should be logging activity(How exactly should I do that?) I am wary of scalpers who would join and then run off with the existing code. I haven't met any, but I have been advised to be wary of them. I would include a secrecy clause, but given this is a startup with almost no funding and in a highly competitive business niche with bigger players in the field, I doubt I would be able to detect or pursue any scalpers. How do I hire people I trust, when I don't know them personally. Their resume will be helpful but otherwise trust will develop only with time. But finally even if they do run away with the code, it is service that matters after the sale is made. So I am not really worried for the long term.

    Read the article

  • Java JRE 1.6.0_37 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    My apologies: this certification announcement got lost in the OpenWorld maelstorm.  Better late than never. The section below entitled, "All JRE 1.6 releases are certified with EBS upon release" should obviate the need for these announcements, but I know that people have gotten used to seeing these certifications referenced explicitly.  The latest Java Runtime Environment 1.6.0_37 (a.k.a. JRE 6u37-b06) is now certified with Oracle E-Business Suite Release 11i and 12 desktop clients.   What's new in Java 1.6.0_37?See the 1.6.0_37 Update Release Notes for details about what has changed in this release.  This release is available for download from the usual Sun channels and through the 'Java Automatic Update' mechanism. 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions. 32-bit JREs are certified on: Windows XP Service Pack 3 (SP3) Windows Vista Service Pack 1 (SP1) and Service Pack 2 (SP2) Windows 7 and Windows 7 Service Pack 1 (SP1) 64-bit JREs are certified only on 64-bit versions of Windows 7 and Windows 7 Service Pack 1 (SP1). Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22.All JRE 1.6 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline.  We test all new JRE 1.6 releases in parallel with the JRE development process, so all new JRE 1.6 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 releases to your EBS users' desktops. Important For important guidance about the impact of the JRE Auto Update feature on JRE 1.6 desktops, see: Planning Bulletin for JRE 7: What EBS Customers Can Do Today References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • Compiling for T4

    - by Darryl Gove
    I've recently had quite a few queries about compiling for T4 based systems. So it's probably a good time to review what I consider to be the best practices. Always use the latest compiler. Being in the compiler team, this is bound to be something I'd recommend But the serious points are that (a) Every release the tools get better and better, so you are going to be much more effective using the latest release (b) Every release we improve the generated code, so you will see things get better (c) Old releases cannot know about new hardware. Always use optimisation. You should use at least -O to get some amount of optimisation. -xO4 is typically even better as this will add within-file inlining. Always generate debug information, using -g. This allows the tools to attribute information to lines of source. This is particularly important when profiling an application. The default target of -xtarget=generic is often sufficient. This setting is designed to produce a binary that runs well across all supported platforms. If the binary is going to be deployed on only a subset of architectures, then it is possible to produce a binary that only uses the instructions supported on these architectures, which may lead to some performance gains. I've previously discussed which chips support which architectures, and I'd recommend that you take a look at the chart that goes with the discussion. Crossfile optimisation (-xipo) can be very useful - particularly when the hot source code is distributed across multiple source files. If you're allowed to have something as geeky as favourite compiler optimisations, then this is mine! Profile feedback (-xprofile=[collect: | use:]) will help the compiler make the best code layout decisions, and is particularly effective with crossfile optimisations. But what makes this optimisation really useful is that codes that are dominated by branch instructions don't typically improve much with "traditional" compiler optimisation, but often do respond well to being built with profile feedback. The macro flag -fast aims to provide a one-stop "give me a fast application" flag. This usually gives a best performing binary, but with a few caveats. It assumes the build platform is also the deployment platform, it enables floating point optimisations, and it makes some relatively weak assumptions about pointer aliasing. It's worth investigating. SPARC64 processor, T3, and T4 implement floating point multiply accumulate instructions. These can substantially improve floating point performance. To generate them the compiler needs the flag -fma=fused and also needs an architecture that supports the instruction (at least -xarch=sparcfmaf). The most critical advise is that anyone doing performance work should profile their application. I cannot overstate how important it is to look at where the time is going in order to determine what can be done to improve it. I also presented at Oracle OpenWorld on this topic, so it might be helpful to review those slides.

    Read the article

  • How do you automate a SharePoint 2010 deployment?

    - by Enrique Lima
    In the last couple of months SharePoint traffic (consulting, training and speaking) has picked up.  And with that also the requests for deployments.  There are good, great, bad and really bad things around this. But that is for another topic.  However part of the good and great has been the fact of organizations wanting to do a proof of concept deployment (even when WSS or MOSS has been deployed). We can go through a session (Microsoft has the SDPS concept, SharePoint Deployment Planning Services) of discovering what the customer wants to achieve from their investment in the platform and then also proceed to model the solution that would fit their needs.  But it should not stop there.  The next step should be a POC (as many have requested) to test out. Now, on to the meat of this post.  How do I deploy?  While it is a good process to watch and see all of it take place, not many have the time to sit through that.  Even more so, when that has been part of the description of deploying the platform in the sessions mentioned above. I will, though, break it into a deployment for development purposes and a deployment of a farm. Two tools (or scripts) for those two different types of deployment. First, let me address the development environment.  Around the last week in October, Chris Johnson (SharePoint Product Team) announced a SharePoint Easy Setup for Developers.  The kit itself will assist you in installing SharePoint Server (in standalone mode), the tools that go around Visual Studio, Expression Studio and the Office 2010 tools. Here is the link to Chris’ post: http://blogs.msdn.com/b/cjohnson/archive/2010/10/28/announcing-sharepoint-easy-setup-for-developers.aspx The other scenario is the use of a script in assisting you through the deployment of a farm. Now, this is not to override planning.  It should highlight the need for planning even more.  How?  Having your service accounts planned, the structure of the sites and the scale of your deployment.  Enter AutoSPInstaller.  This is a CodePlex project, and the intent behind this is not only to automate the installation but to give some meaning and get some sense out of what goes on during a SharePoint deployment. How?  Take for example the creation of the databases, when we do the initial OOB deployment by using the wizard, more times than not, we leave the names as they are.  How is that a “bad thing”?  Let’s make it a better practice to rename those Databases, and have them take on a name that is not “GUID-ized”. Having a better naming convention will not hurt, on the other hand will allow for consistency. Here is the link to AutoSPInstaller’s site on CodePlex: http://autospinstaller.codeplex.com/

    Read the article

  • PeopleSoft New Design Solves Navigation Problem

    - by Applications User Experience
    Anna Budovsky, User Experience Principal Designer, Applications User Experience In PeopleSoft we strive to improve User Experience on all levels. Simplifying navigation and streamlining access to the most important pages is always an important goal. No one likes to waste time waiting for pages to load and watching a spinning glass going on and on. Those performance-affecting server trips, page-load waits and just-too-many clicks were complained about for a long time. Something had to be done. A few new designs came in PeopleSoft 9.2 helping users to access their everyday work areas easier and faster. For example, Dashboard and Work Center aggregate most accessed information sections on a single page; Related Information allows users to complete transaction-related-research without interrupting a transaction and Secure Search gets users to a specific page directly. Today we’ll talk about the Actions menu. Most PeopleSoft pages are shared between individual products and product lines. It means changing the content on a single page involves Oracle development and quality assurance time for making and testing the changes. In order to streamline the navigation and cut down on accessing PeopleSoft pages one-page-at-a-time, we introduced a new menu design. The new menu allows accessing shared pages without the Oracle development team making any local changes, and it works as an additional one-click-path to specific high-traffic actionable pages. Let’s look at how many steps it took to Change Salary for an employee in HCM 9.1 before: Figure 1. BEFORE: The 6 steps a user would take to Change Salary in PeopleSoft HCM 9.1 In PeopleSoft 9.1 it took 5 steps + page loading time + additional verification time for making sure a correct employee is selected from the table. In PeopleSoft 9.2 it only takes 2 steps. To complete Ad Hoc Change Salary action, the user can start from the HCM Manager's Dashboard, click the Action menu within a table, choose a menu option, and access a correct employee’s details page to take an action. Figure 2. AFTER: The 2 steps a user would take to Change Salary in PeopleSoft HCM 9.2 The new menu is placed on a row level which ensures the user accesses the correct employee’s details page. The Actions menu separates menu options into hierarchical sections which help to scan and access the correct option quickly. The new menu’s small size and its structure enabled users to access high-traffic pages from any page and from any part of the page. No more spinning hourglass, no more multiple pages upload. The flexible design fits anywhere on a page and provides a fast and reliable path to the correct destination within the product. Now users can: Access any target page no matter how far it is buried from the starting point; Reduce navigation and page-load time; Improve productivity and reduce errors. The new menu design is available and widely used in all PeopleSoft 9.2 product lines.

    Read the article

  • Building SANE from git-source produce backend missmatch on 12.04 even if built locally

    - by deinonychusaur
    It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

    Read the article

  • At $20/month Windows Azure host my website with 99.97% uptime

    - by Gopinath
    Couple of years ago a reliable and decent performing Windows hosting was not affordable to many enthusiastic developers who want to try a startup idea or build a hobby site. I tried to start an ASP.NET website few years ago to provide services like – Mobile Tracing, Vehicle Tracing. But due to high cost of Windows hosting I developed those services using PHP (not an easy task for .NET developer) and hosted on them Linux servers.  But with recent evolution of Windows Azure, hosting ASP.NET websites on highly reliable servers is affordable. Today anyone can host a high responsive and available ASP.NET website for just $20/month using Windows Azure. My website coziie.com is running on Windows Azure and serves close to quarter millions visitors a month with 99.97% of uptime and most of the page load times are less than 3 seconds. All I spend to run this website is just around $20, if you translate it to India rupees its roughly Rs.1000. The web sever of coziie.com is powered by a single Extra Small Web role instance and the backend is powered by a SQL Azure instance. Azure is quite impressive to provide 99.97% of uptime. Response times during peak are around 3 seconds and on nomarl loads it is around 1.5 seconds. Here is the report of uptime provided by Royal Pingdom over last one year For just $20/month Windows Azure takes care of the following apart from hosting Patches up Windows OS to the latest version Upgrades ASP.NET to the latest version – coziie.com is running on ASP.NET MVC 3 and soon I’ll upgrade it to ASP.NET MVC 4 Hosts data on latest and best version Sql Server database SQL Azure maintains 3 copies of database and automatically recovers in case of server failures and disasters. I never worry about database backups/restore. Provides staging environment for deploying applications for testing purpose and move them to production – I upgrade  twice a month on average With Windows Azure I no longer focus on server maintenance or data backups. They are taken up by Microsoft team and I just focus on building my website. Wish there is a low cost Linux version of Windows Azure so that I can stop worrying about server maintenance of this blog!! If you are looking for a Windows hosting, look no further than Windows Azure. If you find $20/month is a bit expensive to start with you may explore Azure Website (sort of shared hosted environment) which is free to start with and as your traffic grows you can move to paid hosting.

    Read the article

  • What to do when you inherit an unmaintainable codebase?

    - by GordonM
    I'm currently working at a company with 2 other PHP developers aside from me, and 1 junior developer. The senior developer who originally built the system we're all working on has resigned and will only be here for a matter of weeks. The other developer, who is the only other guy who knows anything about the system, is unhappy here and is looking for a new job. I'm very real danger of being left behind as the only experienced developer on this codebase. Since I've joined this company I've tried to push for better coding standards, project documentation, etc and I do think I've made some headway, but the vast majority of the code is simply unmaintainable and uncommented. A lot of this has to do with the need to get things done fast at points in the project before I joined, but now the technical debt is enormous, even with the two developers who do understand the system on board. Without them, it will simply be impossible to do anything with it. The senior developer is working on trying to at least comment all his code before he leaves but I think the codebase is simply too vast to properly document in the remaining time. Besides, when he does comment it still doesn't make things as clear as it could. If the system was better organized and documented I could probably start refactoring it incrementally, but the whole thing is so tightly coupled that it's very difficult to make any changes in one module without having unintended knock-on effects in other modules. Naturally, there's no unit tests either, and I honestly don't think this codebase could possibly be unit tested anyway given how it's implemented. There also never seems to be enough time to get things done even with 3 developers and 1 junior developer. With one developer and one junior, neither of which had significant input into the early design of the system, I don't see how we could possibly get anything done with keeping the current system working, implementing new features as needed and developing a replacement for the current codebase that is better organized. Is there an approach I can take to cope with this situation, or should I be getting my own CV in order as well at this point? If it was just me and the junior designer who would be left I'd go for the latter option almost without question. However, there's a team of front-end developers and content managers as well, and I'm worried what would become of them if I left and put them in a position where there would be no developers at all. The department might just be closed down altogether under such circumstances, and then I'd have their unemployment on my conscience as well!

    Read the article

  • Access denied 403 errors after migrating my site

    - by AgA
    I've recently migrated my Joomla site from one shared hosting to another with Hostgator. GWT notified me about many 403 access denied pages. I've checked with Firebug too, and even though browser is displaying full page correctly but http return is 403. I've checked the home page but it's correctly returing 200 response. The same is shown by Fetch as Google in GWT(pasted this in the bottom). The site is 3 years old and I regularly do such migrations. I've copied the files and database "AS IS". I've even cleared all the caches but no luck. There is only one change: previously the site was primary domain but now it's add-on one. What could be the issue? This is how Googlebot fetched the page. Fetch as Google URL: http://MYSITE.COM/-----------------REMOVED.html Date: Thursday, June 20, 2013 at 10:32:14 PM PDT Googlebot Type: Web Download Time (in milliseconds): 3899 HTTP/1.1 403 Forbidden Date: Fri, 21 Jun 2013 05:32:15 GMT Server: Apache P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM" Expires: Mon, 1 Jan 2001 00:00:00 GMT Cache-Control: post-check=0, pre-check=0 Pragma: no-cache Set-Cookie: 0e4f6b53991c80cf39d57a6db58bb58d=ee2d880e8db0f1fc03c5612ea5a77004; path=/ Last-Modified: Fri, 21 Jun 2013 05:32:19 GMT Keep-Alive: timeout=5, max=75 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=utf-8 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-gb" lang="en-gb" > <head> <base href="http://www.mysite.com/-----------------rajiv-yuva-shakthi-programme-finance-planning.html" /> <meta http-equiv="content-type" content="text/html; charset=utf-8" /> <meta name="robots" content="index, follow" /> <meta name="keywords" content="" /> <<<<<<TRIMMED>>>>>>>>>>>>>>

    Read the article

  • OOF checklist

    - by Daniel Moth
    When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Creating a shared library that might be used with desktop applications and web projects

    - by dreza
    I have been involved in a number of MVC.NET and c# desktop projects in our company over the last year or so while also managing to kept my nose poked into other projects (in a read-only learning capacity of course). From this I've noticed that across the various projects and teams there is a-lot of functionality that has been well designed against good interfaces and abstractions. Because we tend to like our own work at times, I noticed a couple of projects had the exact same class, method copied into it as it had obviously worked on one and so was easily moved to a new project (probably by the same developer who originally wrote it) I mentioned this fact in one of our programmer meetings we have occasionally and suggested we pull some of this functionality into a core company library that we can build up over time and use across multiple projects. Everyone agreed and I started looking into this possibility. However, I've come across a stumbling block pretty early on. Our team primarily focuses on MVC at the moment and we have projects mainly in 2.0 but are starting to branch to 3.0. We also have a number of desktop applications that might benefit from some shared classes and basic helper methods. Initially when creating this DLL I included some shared classes that could be used across any project type (Web, Client etc) but then I started looking at adding some shared modules that would be useful in our MVC applications only. However this meant I had to include a reference to some Microsoft Web DLL's in order to leverage some of the classes I was creating (at this stage MVC 2.0). Now my issue is that we have a shared DLL that has references to web specific libraries that could also possibly be used in a client application. Not only that, our DLL referenced initially MVC 2.0 and we will eventually move onto MVC 3.0 for all projects. But alot of the classes in this library I expect to still be relevant to MVC 3 etc Our code within this DLL is separated into it's own namespaces such as: CompanyDLL.Primitives CompanyDLL.Web.Mvc CompanyDLL.Helpers etc etc So, my questions are: Is it OK to do a shared library like this, or if we have web specific features in it should we create a separate web DLL only targeted at a specific framework or MVC version? If it's OK, what kind of issues might we face when using the library that references MVC 2 in a MVC 3 project for example. I would be thinking that we might run into some sort of compatibility issue, or even issues where the developers using the library doesn't realize they need MVC 2.0 libraries. They might only want to use some of the generic classes etc The concept seemed like a good idea at the time, but I'm starting to think maybe it's not really a practical solution. But the number of times I've seen copied classes and methods across projects because they are proven tested code is a bit unnerving to be perfectly honest!

    Read the article

  • Business Analytics Oracle Partner Advisory Council 2013

    - by Mike.Hallett(at)Oracle-BI&EPM
    72 544x376 WHEN: Friday the 20th of September 2013 (just before OpenWorld) Register by: 1st of August 2013 WHERE: Sofitel San Francisco Bay 223 Twin Dolphin Drive, 94065 REDWOOD CITY, CA, USA Don’t miss this once a year opportunity to meet and drive a closer engagement with Oracle’s global Product Management Team: Oracle global Product Management will host this workshop. Target group: ACE Directors, Lead Consultants and key architects from our partners Topics: Product Development Roadmap, Partner project experience, your feedback, Q&A session For any inquiries please contact [email protected] As part of registering for the event, please note that you will need to complete the BI / EPM PAC-survey. Thank you for taking the time to provide this, your valuable input. The PAC (one for BI, and a separate track for Hyperion) is free of charge, but is only for OPN Specialised member partners, and is subject to availability. (Please do not attend unless you have received a confirmation from Oracle to do so.) Registration Link Coming Soon We do hope you will be able to join us - and I look forward to welcoming you in San Francisco. Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Quickly Copy Movie Files to Individually Named Folders

    - by DigitalGeekery
    Some HTPC media manager applications require movie files to be in stored in separate folders to properly store information such as cover art images and other metadata. Here we look at copying movie files to individual folders. If you already have a large movie collection stored in a single folder, we’ll show you how to quickly move those files into their own individually named folders. File2Folder FIle2folder is a handy portable app that automatically creates and moves movie files into a folder of the same filename. There is no installation needed. Simply download and run the .exe file (link below). Enter the current movie directory, or browse for the folder. File2folder now supports both local and network shares. When you are ready to create the folders and move the files, click Move! You’ll see the move progress displayed in the window. When the process is finished, you’ll have all your movie file in individual folders.   Change your mind? Just click the Undo! button…   …and the move and folder creation process will be undone. If you would like to have the folder monitored for new files, click the Start button. File2folder will process any new files it discovers every 180 seconds. To turn it off, click Stop. This simple little program is a huge timesaver for those looking to organize movie collections for their HTPC. We should also note that this will work with any files, not just videos. Download file2folder Similar Articles Productive Geek Tips Hack: Turn Off Debug Mode in VMWare Workstation 6 BetaAdd Images and Metadata to Windows 7 Media Center Movie LibraryAdd Folders to the Movie Library in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterMove the Public Folder in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician

    Read the article

  • Oracle GoldenGate 11gR2 Event Marker System

    - by Doug Reid
    0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Oracle GoldenGate 11gR2 includes a number of refinements to the Event Marker system. Using event markers enables GoldenGate processes to take a defined action based on an event in the data stream. This feature within Oracle GoldenGate simplifies methods to embed specific custom processing in the areas of error handling, alerts, and notification. The event marker system effectively allows for DML driven workflows to be created within GoldenGate and enables customers to craft non-standard processing based on special events. There are a number of supported event actions including: trace, log, checkpoint before, suspend, abort, and several others. With 11gR1 events can now be triggered by DDL operations, plus variables can be passed in and out of the system to shell scripts. Some good use cases for this feature are Automatic switchover to the secondary system during planned outages Better monitoring over source systems’ performance and automated switchover to the standby system in case of an outage with the primary system Automatic switchover from initial load to changed data movement Automatic synchronization of any type of batch processing taking place on both the source and target databases for database consistency Automatic stoppage of the Delivery module to allow end-of-day reporting Finding, tracking, and reporting on transactions that are of interest including the ones that do not have primary keys or transaction record numbers If you would like to see a demo, please visit our youtube channel (http://youtube.com/oraclegoldengate)  To learn more about the new features of Oracle GoldenGate 11gR2 and to ask questions to the PM team, please join us on September 12th  8am or 10am PST for our live webcast. Click here to register.

    Read the article

  • need some concrete examples on user stories, tasks and how they relate to functional and technical specifications

    - by gideon
    Little heads up, Im the only lonely dev building/planning/mocking my project as I go. Ive come up with a preview release that does only the core aspects of the system, with good business value and I've coded most of the UI as dirty throw-able mockups over nicely abstracted and very minimal base code. In the end I know quite well what my clients want on the whole. I can't take agile-ish cowboying anymore because Im completely dis-organized and have no paper plan and since my clients are happy, things are getting more complex with more features and ideas. So I started using and learning Agile & Scrum Here are my problems: I know what a functional spec is.(sample): Do all user stories and/or scenarios become part of the functional spec? I know what user stories and tasks are. Are these kinda user stories? I dont see any Business Value reason added to them. I made a mind map using freemind, I had problems like this: Actor : Finance Manager Can Add a Financial Plan into the system because well thats the point of it? What Business Value reason do I add for things like this? Example : A user needs to be able to add a blog article (in the blogger app) because..?? Its the point of a blogger app, it centers around that feature? How do I go into the finer details and system definitions: Actor: Finance Manager Action: Adds a finance plan. This adding is a complicated process with lots of steps. What User Story will describe what a finance plan in the system is ?? I can add it into the functional spec under definitions explaining what a finance plan is and how one needs to add it into the system, but how do I get to the backlog planning from there? Example: A Blog Article is mostly a textual document that can be written in rich text in the system. To add a blog article one must...... But how do you create backlog list/features out of this? Where are the user stories for what a blog article is and how one adds/removes it? Finally, I'm a little confused about the relations between functional specs and user stories. Will my spec contain user stories in them with UI mockups? Now will these user stories then branch out tasks which will make up something like a technical specification? Example : EditorUser Can add a blog article. Use XML to store blog article. Add a form to add blog. Add Windows Live Writer Support. That would be agile tasks but would that also be part of/or form the technical specs? Some concrete examples/answers of my questions would be nice!!

    Read the article

  • So, I though I wanted to learn frontend/web development and break out of my comfort zone...

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • Oracle HCM User Group (OHUG) 2014

    - by CaroleB
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We Have Your Answers at the Oracle Support Central for Oracle E-Business Suite. Bring your toughest questions to Support Central and meet an Oracle Support expert to get your answers! Don’t miss your opportunity to spend focused time working with a Support Engineer or Manager one-on-one. Support Engineers: Here to Help You Succeed Let us help you solve problems without having to log an SR. We can help you streamline and simplify your daily operations or reduce your risks. We can show you how to maximize up-time and lower your organizations costs through preventative maintenance. Learn about Oracle HCM Cloud, or our new tools and processes that get you answers faster, such as analyzers and patch wizards. Check out the Product Information Centers, Newsletters, and My Oracle Support searches tips and tricks. Stop by and meet a Support Engineer that you may have worked with on a past Service Request. Get an explanation for a product area that you may have more questions on. Oracle Support is ready to help you with the Oracle HCM applications that you rely on to run your business. Support Central: HCM Support Leadership Here for You The Oracle Support Central is open Tuesday through Thursday.  We have a Support Leadership team of managers here to discuss your crucial milestones or your intentions to upgrade or configuring Oracle HCM products. We can provide heightened monitoring and engagement for a successful milestone. We are here for any ad-hoc account reviews that you would like to initiate on your OHUG trip. Location: Las Vegas: Mirage: Montego A Contact: Gregory Clark or Carole Black    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast- mso-fareast-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Self-Executing Anonymous Function vs Prototype

    - by Robotsushi
    In Javascript there are a few clearly prominent techniques for create and manage classes/namespaces in javascript. I am curious what situations warrant using one technique vs. the other. I want to pick one and stick with it moving forward. I write enterprise code that is maintained and shared across multiple teams, and I want to know what is the best practice when writing maintainable javascript ? I tend to prefer Self-Executing Anonymous Functions however I am curious what the community vote is on these techniques. Prototype : function obj() { } obj.prototype.test = function() { alert('Hello?'); }; var obj2 = new obj(); obj2.test(); Self-Closing Anonymous Function : //Self-Executing Anonymous Function (function( skillet, $, undefined ) { //Private Property var isHot = true; //Public Property skillet.ingredient = "Bacon Strips"; //Public Method skillet.fry = function() { var oliveOil; addItem( "\t\n Butter \n\t" ); addItem( oliveOil ); console.log( "Frying " + skillet.ingredient ); }; //Private Method function addItem( item ) { if ( item !== undefined ) { console.log( "Adding " + $.trim(item) ); } } }( window.skillet = window.skillet || {}, jQuery )); //Public Properties console.log( skillet.ingredient ); //Bacon Strips //Public Methods skillet.fry(); //Adding Butter & Fraying Bacon Strips //Adding a Public Property skillet.quantity = "12"; console.log( skillet.quantity ); //12 //Adding New Functionality to the Skillet (function( skillet, $, undefined ) { //Private Property var amountOfGrease = "1 Cup"; //Public Method skillet.toString = function() { console.log( skillet.quantity + " " + skillet.ingredient + " & " + amountOfGrease + " of Grease" ); console.log( isHot ? "Hot" : "Cold" ); }; }( window.skillet = window.skillet || {}, jQuery )); //end of skillet definition try { //12 Bacon Strips & 1 Cup of Grease skillet.toString(); //Throws Exception } catch( e ) { console.log( e.message ); //isHot is not defined } I feel that I should mention that the Self-Executing Anonymous Function is the pattern used by the jQuery team. Update When I asked this question I didn't truly see the importance of what I was trying to understand. The real issue at hand is whether or not to use new to create instances of your objects or to use patterns which do not require constructors of the use of the new keyword. I added my own answer, because in my opinion we should make use of patterns which don't use the new keyword. For more information please see my answer.

    Read the article

  • The Minimalist Approach to Content Governance - Create Phase

    - by Kellsey Ruppel
     Originally posted by John Brunswick. In this installment of our Minimalist Approach to Content Governance we finally get to the fun part of the content creation process! Once the content requester has addressed the items outlined in the Request Phase it is time to setup and begin the production of content.   For this to be done correctly it is important the the content be assigned appropriate workflow and security information. As in our prior phase, let's take a look at what can be done to streamline this process - as contributors are focused on getting information to their end users as quickly as possible. This often means that details around how to ensure that the materials are properly managed can be overlooked, but fortunately there are some techniques that leverage our content management system's native capabilities to automatically take care of some of the details. 1. Determine Access Why - Even if content is not something that needs to restricted due to security reasons, it is helpful to apply access rights so that the content ends up being visible only to users that it relates to. This will greatly improve user experience. For instance, if your team is working on a group project many of your fellow company employees do not need to see the content that is being worked on for that project. How - Make use of native content features that allow propagation of security and meta data from parent folders within your content system that have been setup for your particular effort. This makes it painless to enforce security, as well as meta data policies for even the most unorganized users. The default settings at a parent level can be set once the content creation request has been accepted and a location in the content management system is assigned for your specific project. Impact - Users can find information will less effort, as they will only be exposed to what they need for their work and can leverage advanced search features to take advantage of meta data assigned to content. The combination of default security and meta data will also help in running reports against the content in the Manage and Retire stages that we will discuss in the next 2 posts. 2. Assign Workflow (optional depending on nature of content) Why - Every case for workflow is going to be a bit different, but it generally involves ensuring that content conforms to management, legal and or editorial requirements. How - Oracle's Universal Content Management offers two ways of helping to workflow content without much effort. Workflow can be applied to content based on Criteria acting on meta data or explicitly assigned to content with a Basic workflow. Impact - Any content that needs additional attention before release is addressed, allowing users to comment and version until a suitable result is reached. By using inheritance from parent folders within the content management system content can automatically be given the right security, meta data and workflow information for a particular project's content. This relieves the burden of doing this for every piece of content from management teams and content contributors. We will cover more about the management phase within the content lifecycle in our next installment.

    Read the article

  • From Co-op to fulltime help with salary negotation [closed]

    - by Peter
    Hey I'm a coop student that worked at a particular medium size printing company for 8 months. I had a good time it was lax, sometimes insufficiently challenging but none the less I learned a whole lot. I stuck with them for another 5 months (including this month) at the same rate I was paid then, doing testing work, tool development, taking care of emergencies when the lead developers were away, and other smaller projects and now bigger projects and problem handling (bad printer output etc.). I know their website inside out (ecommerce), and I know their printing software inside out and have made many changes to them both without a hitch. I have also done a lot of refactoring of the existing code base which as far as Im concerned, I believe am the only one to do those sorts of restructuring even though there is constant talk about it. I guess the unit testing paid off and lets me see the value in modularity if even a tad more. Never the less I have faith in my skill and the restructuring I did turned out better than I had imagined . Now the problem is that I finish school next month and so I asked for a full time spot the month after. They have been expanding and have hired a new guy a few months after my coop spot, and just now they hired a new guy to deal with the CRM application. The lead developer who wrote all of the software had left 5 months ago so it was up to all of us to learn what he had done over 4 years (including db, networking). So now I'm afraid that if I assert myself for a salary similar to the other guys, which I believe I am certainly on par with, that I would be seen as ingrateful. It's hard to flip a switch and say, hey double my pay, although when I'm working with their bread and butter (printers) and writing new features, refactoring the whole application for extensibility. I love it regardless of pay. I also feel maybe I'm replaceeble, although nobody knows the website better than myself and the lead web dev (not by a long shot), and nobody knows the printer software/drivers better than myself. I just thought they would have brought up a raise earlier on, and now it feels like they don't value my work. I'm also tired of worrying about it. I think my question is, well what do I do next?

    Read the article

  • Good, simple reasons for having multiple environments

    - by smp7d
    Throughout my career I had worked at companies that had a collection of different environments for different purposes. We always had more or less our desktop environment, a test environment, a QA environment, a staging environment and a production environment. This went for both servers/applications and any data sources we were using. When I started at my current company I found that 90% of the apps were either developed on a desktop environment against production data sources or developed directly on the production server depending on the platform. I wasn't fazed because I was hired in part to make changes to improve the way the development team functioned, which was clear from my interview process. We slowly started to turn the philosophy and pretty soon, most of the apps could be run in either a desktop, test or production environment. Not too long after that staging came around as well. Now most of our developers see the benefit of this methodology and defend it vigilantly. However, we have a number of legacy apps that never got migrated. We also have a number of legacy programmers who think of this as a waste of time. Unfortunately, we got lip service but never full buy-in from management. We got what we thought was a commitment to invest substantially in this about a year ago, but nothing materialized despite the considerable planning that we put into it. Now we are finding that we need more and more environments. We need help from the server/network administration teams for setup and we need participation from the business stakeholders to support the release cycle. We are at a place now where a project can function what I consider "normally" only if you have the right people on the project and the time to set up the proper environments. I'd love to present a complete argument, but management really has no time and interest in hearing me out until there is a critical issue. I can't really articulate the benefits simply as it always just seemed second nature to me. I was wondering if there are any good, simple, irrefutable reasons for the separation of environments that would get managers with no development experience to get behind this idea. Are there any good resources/literature on the topic?

    Read the article

  • Resources to Help You Getting Up To Speed on ADF Mobile

    - by Joe Huang
    Hi, everyone: By now, I hope you would have a chance to review the sample applications and try to deploy it.  This is a great way to get started on learning ADF Mobile.  To help you getting started, here is a central list of "steps to get up to speed on ADF Mobile" and related resources that can help you developing your mobile application. Check out the ADF Mobile Landing Page on the Oracle Technology Network. View this introductory video. Read this Data Sheet and FAQ on ADF Mobile. JDeveloper 11.1.2.3 Download. Download the generic version of JDeveloper for installation on Mac. Note that there are workarounds required to install JDeveloper on a Mac. Download ADF Mobile Extension from JDeveloper Update Center or Here. Please note you will need to configure JDeveloper for Internet access (In HTTP Proxy preferences) in order the install the extension, as the installation process will prompt you for a license that's linked off Oracle's web site. View this end-to-end application creation video. View this end-to-end iOS deployment video if you are developing for iOS devices. Configure your development environment, including location of the SDK, etc in JDeveloper-Tools-Preferences-ADF Mobile dialog box.  The two videos above should cover some of these configuration steps. Check out the sample applications shipped with JDeveloper, and then deploy them to simulator/devices using the steps outlined in the video above.  This blog entry outlines all sample applications shipped with JDeveloper. Develop a simple mobile application by following this tutorial. Try out the Oracle Open World 2012 Hands on Lab to get a sense of how to programmatically access server data.  You will need these source files. Ask questions in the ADF/JDeveloper Forum. Search ADF Mobile Preview Forum for entries from ADF Mobile Beta Testing participants. For all other questions, check out this exhaustive and detailed ADF Mobile Developer Guide. If something does not seem right, check out the ADF Mobile Release Note. Thanks, Oracle ADF Mobile Product Management Team

    Read the article

< Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >