Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 532/802 | < Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >

• "No active network adapters found" Hyper-V 2008 R2

  - by mnemosyn

  I fiddled around with the virtual network settings of my Hyper-V server, because Windows Update failed to run in the VMs. I set the flag that makes the NIC exclusively usable by the VM. Now, the host system tells me it has no active network adapters. What does that even mean? According to netsh, there are three enabled network connections. I tried to restart the NICs using devcon.exe (the correct x64 version), but that doesn't make any difference - still, devcon reports the NICs are there and they are activated?! Is there any way I can force the host to re-enable the NICs?

  Read the article

• Need HP recovery partition info

  - by ggambett

  I'm configuring a new HP Pavillion DV4 with a 320 GB disk. I made the recovery DVDs, then did a couple other things (including deleting the recovery partition), and finally decided to restore the system. Unfortunately, the recovery process fails; the three DVDs are read (the recovery program says "Reformatting the Windows partition" and "Copying files required to restore the hard drive") but after it finishes reading the 3rd, and the progress bar reaches 100%, it fails with error 0xe0f00013 - Googling it didn't return anything at all. I'm afraid this may be because I deleted the partitions. So, I'm kindly asking for one of the following, in order of preference, from a HP Pavillion DV4 with a 320 GB hard disk or a similar enough one : 1) A dump of the MBR 2) The type and size of all the partitions in a "new" system so I can try to make a partition table resembling the original one. BTW, I thought the recovery DVDs were supposed to work even if the entire disk was wiped - isn't that the case? Thanks!

  Read the article

• Rotate monitor to portrait on Windows Server 2003 with ATI card

  - by Eli

  Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

  Read the article

• Windows Server 2008 R2 Accessing NFS share without AD or NIS

  - by Jon Rhoades

  I'm trying to mount an NFS share on our NetApp SAN on Windows 2008 R2. Using XP I have no problem mounting this share without a username/NIS/pswd file etc, but the new functionality in 2008 seems to insist on either using AD or an NIS server (to "streamline" Services for NFS MS removed user account mapping) see Technet. When I go to map the share using "map network drive" no combination of "root", no username, no password, my username works. Using the command line mount -o anon \\172... :n or mount -o -u:root \\172... :n either gives me a network error 53 or 67 error Is it possible with 2008 to mount an NFS share without AD or NIS? If so what am I doing wrong? (Security is taken care off by IP address permissions and VLANs)

  Read the article

• BIOS update for Asrock H67M-GE/THW

  - by Eugene Beresovksy

  I can't seem to find a flash image for my mainboard. There is not even a product page for it (any more, although there used to be a manual at http://download.asrock.com/manual/qig/H67M-GETHW.pdf, as google revealed). So no driver updates from the manufacturer for my mainboard either. I offered the flash images for both of the similarly named H67M-GE and H67M-GE/HT to asrock's "Instant Flash" utility, but it complained it "could not find an image" on my usb drive. The asrock page states that "Instant Flash" searches for a flash image that exactly matches the mainboard, i.e. it must have determined that the H67M-GE/THW I have is different from H67M-GE and H67M-GE/HT. Any idea?

  Read the article

• Trouble upgrading OSX, because HD doesn't use GUID Partition Table Scheme

  - by Erik Vold

  So I have a intel-based macbook with osx 10.5 and I'm trying to upgrade to 10.6, but when I run the upgrade 'install' I quickly get to a page where I am supposed to 'Select the disk where you want to install Mac OS X' and there is only the one hard drive, so it is auto selected, and below that I see a warning message and the only button available is the 'Go Back' button. The warning message says: "Macintosh HD" can't be used because it doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options. So I followed the above instructions, and I got to the last step, where I'm supposed to click the 'Options' button, the problem is that I cannot click that button, it is disabled.. So what am I supposed to do?

  Read the article

• SonicPoint AP Clients Not Able To Connect With DHCP

  - by Mike Keller

  This is my first time setting up anything like this so please be gentle. I'm a web developer who fell into setting up a few SonicWall NSA 4200's... I've tried doing as much research on this through Google and ServerFault but haven't been able to hunt down an answer as to what I'm doing wrong. We've got two virtual access points set up here, one that is intended for employees (tied to X2) and the other for guests (tied to X2:V1). We are not using the DHCP server on the NSA 4200, but one already on the network. When a client connects to the employee SSID they are able to obtain a IP from the network's DHCP server. However when attempting to connect to the guest SSID the client does a search for a DHCP server but can't find one. Any clues, resources, answers would be appreciated.

  Read the article

• WinSat command line closes too fast

  - by Rob Cowell

  I'm trying to do some analysis under Windows 7 as to why I can't get a Windows Experience Index (WEI) rating due to disk issues. To this end, I'm trying to run winsat from the command line with :- winsat disk -seq -read -drive c and winsat disk -ran -write -n 2 but the command window is closing too quickly to be able to read the results. I've tried opening a seperate cmd window to run it in but it still insists on launching its own window to run in, closing straight away. Any idea how I can see the output?

  Read the article

• Recommendation for PHP-FPM pm.max_children, PHP-FPM pm.start_servers and others

  - by jaypabs

  I have the following server: Intel® Xeon® E3-1270 v2 Single Processor - Quad Core Dedicated Server CPU Speed: 4 x 3.5 Ghz w/ 8MB Smart Cache Motherboard: SuperMicro X9SCM-F Total Cores: 4 Cores + 8 Threads RAM: 32 GB DDR3 1333 ECC Hard Drive: 120GB Smart Cache: 8MB I am using ubuntu 12.04 - nginx, php, mysql with ISPConfig 3. Under ISPConfig 3 website settings: I have this default value: PHP-FPM pm.max_children = 10 PHP-FPM pm.start_servers = 2 PHP-FPM pm.min_spare_servers = 1 PHP-FPM pm.max_spare_servers = 5 PHP-FPM pm.max_requests = 0 My question is what is the recommended settings for the above variable? Because I found some using a different settings.

  Read the article

• “BAD” partition showing up in Partition Manager

  - by Quintin Par

  I tried to partition my primary hard disk (NTFS partitions) with qtparted and got stuck in the process. Consequently I had to kill the process and exit my knoppix live CD boot up. Even though I was expecting XP to get corrupted, it booted fine and showed up all the drives accessible. But when I opened this with partition manager 8, it shows up as “BAD”. I ran chkdsk /f without any success. My objective with qparted and partition magic was to resize my existing partitions and add some space to c: How do I fix this problem and resize my partitions? Edit: Here's how my primary drive as per windows is

  Read the article

• Sonicwall SSL VPN Login : I need help with a NetExtender initialization error.

  - by jacke672

  I receive the error message: "Server is busy now, please try it later!" after logging into our Sonicwall successfully and attempting to initialize NetExtender for the "virtual office" function. It was set up yesterday and I am able to log in without any issues, but I keep getting hung up on the installation and/or initialization of NetExtender. I have attempted to connect remotely on XP and 7 using both FireFox and IE. I am using a Sonicwall NSA-240 with load balancing active (1 ISP and 2 different connections)- I have tried turning off load balancing and disabling the secondary connection but still receive the same error. I've been in contact with SonicWall support but I haven't heard from them as of yet so I'm asking the Server Fault community in the meantime... Does anyone have any ideas as per what could be the issue? Thanks -Jack

  Read the article

• Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

  - by Deleted

  I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

  Read the article

• VirtualBox error VERR_SUPDRV_COMPONENT_NOT_FOUND

  - by ant2009

  I am using Fedora 12, with kernel stv-fedora 2.6.31.12-174.2.22.fc12.i686 I have install VirtualBox OSE v3.1.4-1.fc12. When I start VirtualBox I get the following error: Failed to start the virtual machine WinXP32. Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). However, if I run /etc/init.d/vboxdrv setup I get this error: -bash: /etc/init.d/vboxdrv: No such file or directory How do I get rid of the error and run VirtualBox?

  Read the article

• How do I build a DIY NAS?

  - by Kaushik Gopal

  I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

  Read the article

• Can't install SQL Express 2008R2- caspol.exe application error - the application failed to initialize

  - by Nir

  I'm trying to install SQL Server Express 2008 R2 on Windows 2003 Server (enterprise edition). I get the following error message: Title: caspol.exe - Application Error Text: The application failed to initialize properly (0x000007b), Click on OK to terminate the application. I get the same error message both when downloading the installer and running it and when using the web platform installer. All the pages on the internet I've found about similar problem say it's a corrupt .net installation issue - This server runs multiple .net apps and I've never had any problems with any of them. I've uninstalled and reinstalled .net (causing a painful outage) and nothing changed. Does anyone here has any idea what might cause this? Update 1: additional information I forgot to include: 32bit version of Windows running in a virtual machine, no anti virus Update 2: when running caspol.exe from the command line I get the same error

  Read the article

• Mac OS X bypass proxy for certain domains

  - by Brian

  In college I'm behind a proxy. When I try to visit one of my local Apache virtual hosts behind the proxy, then my college DNS attempts to resolve the host, thus bypassing my local host file. In the advanced setting for proxies you seem to be able to enter values into "Bypass proxy settings for these Hosts & Domains". I added the last 2 to the end - "*.local, 169.254/16, *.dev, *.sb". But it doesn't work. Is there a solution?

  Read the article

• Crash when attempting to install 32bit delphi service on 2008 r2

  - by Oded

  I have an old 32bit delphi application (with no source code), that is used as a windows service. It runs fine on windows 2003 32bit. I do not know if it has been created as a service originally, or converted to one later on. It is supposed to get installed to the server using a /install flag on the command line. When attempting to install it on a Windows 2008 R2 virtual machine, I am getting an APPCRASH event in the event log. The service is supposed to read a blob from a remote SQL Server instance and write it out to the local HD. It also reads some initialization data from the registry. Is there any way I can install this application as a service on windows 2008 r2 64bit? If not, are there any workarounds I can try? What are your suggestions?

  Read the article

• Trying to make a custom Arch-based Linux distro with larch

  - by strangeronyourtrain

  I'm all set up with a spiffy Arch installation in a virtual machine, and now I want to turn it into a live ISO. When I heard about larch, I thought it would be the perfect tool to turn my existing installation into something I could distribute. However, I can't get larch to install properly. I followed the installation instructions on the website, which said to download and run the larch-setup script. When I run it, though, it installs the larch profiles and libraries but doesn't install the executable programs. Here's a screenshot of the errors I get when larch-setup tries to install the executables. I'd greatly appreciate any clues to what is going wrong here, or suggestions for alternative ways to turn my customized Arch installation into an ISO! Thanks!

  Read the article

• Intel® Core™2 Duo Desktop Processor vs Intel® Core™ i3 Desktop Processor?

  - by metal gear solid

  Intel® Core™2 Duo Desktop Processor vs Intel® Core™ i3 Desktop Processor? Which CPU is better to buy ? Intel® Core™ i3-530 Processor (4M Cache, 2.93 GHz) (it supports DDR3 also) or Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) (it supports DDR2 only ) Although I do not play games on my PC but I need good performance in Adobe Photoshop, Watching Full HD Movies. I need good performance in Multitasking. Along with any of these CPU I would purchase 2 GB x 2 stick of RAM. and I will use Windows 7. and I will use Microsoft VPC images also with MS Virtual PC.

  Read the article

• Can I minimize VMWare Workstation from exclusive mode?

  - by Blorgbeard

  I am running a VM on two monitors, in fullscreen exclusive mode. I would like to be able to minimize the VM and mess around in the Host, then go back to the VM. I can do this by pressing CTRL+ALT to get out of fullscreen mode, but this puts the VM back onto a single monitor, which moves all my VM's windows back to the main virtual screen. This is annoying, because when I come back to the VM, I have to go back to multiple monitor mode, and move windows back to where they should be. Is there a way to temporarily escape from fullscreen exclusive mode, without disturbing multi-monitor layout? I should note that I'm only using exclusive mode to get rid of the popup toolbar that otherwise appears when your mouse gets too close to the top of the screen. If there's another way to kill that, please let me know. My host and guest are both Windows 7 x64, and I'm running VMWare Workstation 8.

  Read the article

• Windows 7 Windows XP mode cannot run - it says "Require Hardware Assisted Virtualization"

  - by Jian Lin

  After installing the 2 files for Windows 7 Windows XP mode, the Start Menu now has Windows Virtual PC Windows XP Mode but clicking on the first merely brings out a folder, and clicking on the second brings out a dialog box that says: "Require Hardware Assisted Virtualization" Does that mean the machine cannot support Windows 7 Windows XP mode? I am running Win 7 Ultimate 64 bit edition. This is the dialog box: Update: the computer is an HP TouchSmart, with American Megatrends BIOS v02.61. I looked into the BIOS set up but it is quite simple and dosen't have something for "hardware assisted virtualization". The CPU is Intel Core 2 Duo T5750.

  Read the article

• Create files on C:\ root gives error 0x80070522

  - by Bryan

  One of our customers has just found a problem when trying to create a file on the root of the C:\ Drive, on a Windows 7 Professional PC. I know they shouln't be keeping files here, but there is a valid reason in this case, so I've relaxed the security on the root of C:\ by giving the group 'users' modify permission. Before I relaxed the security, the user was receiving 'access denied', but now they are receiving the message: An unexpected error is keeping you from creating the file. If you continue to recieve this error, you can use the error code to search for help with this problem. Error 0x80070522: A required priviledge is not held by the client. Googling for this suggests that it is caused by UAC, but how can I get round this when the user doesn't have admin rights on their PC?

  Read the article

• IOCTL call error when trying to format an SD card

  - by masfenix

  Found an SD card (1GB) lying around. Thought I might pop that into my card reader and see if anything is on it. Nothing. There isn't even a file system on it. I right-click and go "format" but nothing happens. So I try in command. > format f: Insert new disk for drive F: and press ENTER when ready... Error in IOCTL call. What does this mean?

  Read the article

• VMware Workstation Error: Cannot find a valid peer process

  - by Robert Claypool

  I am running VMware Workstation 6.1.5 (build-126130) on CentOS 5.3 (Final). One of the guest machines is reporting an error when I try to power on the most recent snapshot. Snapshots further back in the timeline will power on without any problem. Error: Unable to change virtual machine power state: Cannot find a valid peer process to connect to. Apparently I'm not the only one with this problem. Others have been reporting it since at least early 2005. The forums say to delete unused lock files and restart any hung VMware processes (or restart the host machine), which I have done. Still no luck. Any other ideas?

  Read the article

• How can you use Windows Backup with a TrueCrypt encrypted backup destination?

  - by Burly

  Background There are numerous backup solutions out there for Windows and they come in many different forms. From a file copy and/or syncing tool like SyncBackSE to whole hard drive backup utilities based on Volume Shadow Copy like Acronis TrueImage or Norton Ghost to block level copy tools like dd. Each of these solutions offers different pros and cons versus the "Windows Backup and Restore Center" feature built-in to Windows Vista and Windows 7. I am not interested in discussing alternative backup solutions here however, as that has already been covered by numerous other questions. Contraints There are two "types" of backup supported by the "Windows Backup and Restore Center"(WBRC): - File backup (which Windows calls "Back Up Files") - Full System Backup (which Windows calls "Complete PC Backup) I am interested in a solution which supports either and/or both types of backup with WBRC. Questions How can you use a TrueCrypt encrypted mount point as the destination for the built-in "Windows Backup and Restore Center" feature in Windows Vista and 7? See-Also Volume Shadow Copy based backup that works with TrueCrypt References Backup and Restore Center Windows Vista - Backup and Restore Center Windows 7 - Backup and Restore Center

  Read the article

< Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >