Search Results

Search found 16331 results on 654 pages for 'option'.

Page 533/654 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Installed Memory (RAM): 8GB (4GB Useable)

  - by Mike Bannister

  I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

  Read the article

• Am I safe on Windows if I continue like this?

  - by max

  Of all the available tons of anti-malware software for Windows all over the internet, I've never used any paid solution(I am a student, I have no money). Since the last 10 years, my computers running Windows have never been hacked/compromised or infected so badly that I had to reformat them(of course I did reformat them for other reasons). The only program I have for security is Avast Home Edition, which is free, installed on my computers. It has never caused any problems; always detected malware, updated automatically, has an option to sandbox programs and everything else I need. Even if I got infected, I just did a boot-time scan with it, downloaded and ran Malwarebytes, scanned Autoruns logs, checked running processes with Process Explorer and did some other things and made sure I cleaned my computer. I am quite experienced and I've always taken basic precautions like not clicking suspicious executables, not going to sites which are suspicious according to WOT, and all that blah. But recently I've been doing more and more online transactions and since its 2012 now, I'm doubtful whether I need more security or not. Have I been just lucky, or do my computing habits obviate the need to use any more(or paid) security software?

  Read the article

• Formatting not retained in paste from Ditto (clipboard manager). Plain text pasted instead [Solved] Add supported types

  - by Jeff Kang

  I'm trying to use Ditto on the Ditto documentation. If I were to copy the table of contents, then paste it (without Ditto) to the word processor, I get http://i.imgur.com/V1GU3.png, and the formatting is maintained. As as a result of the copy operation, the table of contents also goes into the Saved Items List (= History List = Lists the Clips saved from the Clipboard) in Ditto’s Main Window: I open a blank document to paste from Ditto instead of the default clipboard, and press either Ctrl-`, the default Ditto window activation Global Hot Key, or click the tray icon. From this point, I can do 3 things to close the Ditto window, and place the item on the clipboard (the default clipboard?). Select the item, and press Enter Put the cursor on the item, and double-click Select the item, and press Ctrl-c 1) and 2) send a right-click where the cursor is, after the Ditto window closes (presumably to have the paste option ready to access?): Ctrl-c just closes the Ditto window. Whichever method is used, the contents are pasted in what I believe is plain text: http://i.imgur.com/mQAZH.png How do I keep the formatting that the default clipboard keeps? Thanks.

  Read the article

• Need software to convert RAR to ZIP ("store" mode - no compression) * Extract->re-archive changes date/time attributes

  - by Larry78

  I have tried all of the following applications (download.cnet.com - the free ones), and none of them will convert an RAR archive to a ZIP, without compressing the files ("store" mode). 7-ZIP would be fine, too. [The RAR is a "solid" archive with password (I know it), files "stored" - no compression, used WinRAR 3.5.1] PeaZip, 7-Zip, FilZip, TugZip, SimplyZipSE, QuickZip, WinShrink. (A couple of the apps let you try, but the program gives an error - indicating how bad the software is. (Like "unknown header # #.") None of these apps will do the conversion at all. IZArc 4.1 comes the closest. It will convert an RAR to a ZIP, but it compresses the zip. There is a general preference setting to "store" - but it doesn't effect conversions. I don't want to extract the RAR files and re-archive them because I need to preserve the modified/created file attributes. IZArc preserves them, but it compresses the files. WinRAR has the option to convert archives, but I get the error "skipping encryped archive" when I try to convert it. It asks for the password first, and I know it's right because that password opens the archive, and I can read/view all the files in the archive.

  Read the article

• Is it possible to theme Windows 7 like XP?

  - by LonelyPixel

  Everybody seems to mean the window frame colour and a set of desktop background pictures when they're talking about Windows 7 themes. Does anybody remember what themes used to be in Windows XP? You could actually alter the appearance of the window frame, how close buttons and menu popups looked, put a texture on the taskbar, all those funny things. Microsoft themselves have published a number of XP themes over time (Luna on XP, Royal on MCE2005, Zune later on). I don't say that most of those and the numerous third party XP themes were beautiful or even practical. But it was possible to create something nice. In Windows 7 (I suppress the existence of Windows Vista...) such a theme could well be used to increase readability to a level before Aero Glass again. I mean, you cannot really tell whether a Glass window is active or not. I've been tweaking the colours and transparency levels a lot recently but the only safe indicator is the close button: it's red when the window is active, it's colourless otherwise. Then there's the window title. It is always painted black, on however dark a background. Again, regardless of whether the window is active or not. Turning off Aero is not an option in Windows 7 anymore. Classic design looks just ugly there. It already wasn't exactly looking good on XP with the wide start menu. So, can we increase the readability of the Windows 7 UI with themes like in XP or didn't Microsoft learn a thing since the Windows 7 Preview "Vista"?

  Read the article

• How can I create a macro that acts on a relative reference rather than an absolute reference to cell A1?

  - by Bruce

  I have a master rent statement in an Excel 2007 (macro enabled) spreadsheet that shows all tenants in rows with columns formed by the months. Each tenant then has a separate rent statement sheet like the one below that pulls the data through from the master rent statement and all I do then is to copy the last 4 columns to the right and add them to the right, just renaming the month labelled as ‘rent due’ with the current month and then hiding the previous last 4 columns to the left so that the statement always shows the previous month's activity and the amount due for the current month: I used a macro to speed up the creation of these statements, but then found that in some cases the result was wrong and needed major correction because the macro use absolute references i.e. its starting position was relative to cell A1 whereas some of my rent worksheets commence from a different column and in some cases from a different column and a different row. I have tried recording the macro with 'Use relative references' but when trying to use the macro it only gets part way through its operation before it stops and the message appears: Run time error '1004' Application defined or object defined error with the option to End or Debug or go to Help and then I'm stuck as I don't know how to debug and work in VBA or understand what has gone wrong. I want to record a single macro that always remains relative to the last 'Total Due' column heading (in the sample, it’s cell FF3 but on another worksheet could be cell GA26) and thus enables me regardless of where on the worksheet the rent statement is placed to add through my recorded macro a further four columns with updated dates and a repositioned 'Total Due' summary (in the sample in cells FE23 and FF23). The contents of cells FE23 and FE22 are always the same number of rows from the 'Sample Rent Statement, Service Charge and Sub Total' rows. I've searched on the web and in the help files of Excel 2007 but have been totally stumped by this, so currently I have to re-record a quantity of macros each month to cover all of the permutations of the worksheets in my Excel rent workbook, which is starting to become pointless in terms of saving time. Does someone know a solution to this problem please?!

  Read the article

• Odd one: IE6 showing the "view source" command enabled when I was expecting it to be disabled.

  - by caerphilly

  Hi, OK, I admit this problem is odd. I'm just trying to understand why IE is behaving the way it is. I realise that logic may not apply here :) I have Internet Explorer 6 (Sp1) running on Windows 2000. The IE option "Do not store encrypted pages to disk" is checked (enabled). The temporary internet files folder is empty. TEMP and TMP environment variables are set to valid folders. I'm connected to a web server over SSL. The web server is serving a page over SSL with the HTTP cache-control header set to "no-cache, no-store". I was expecting the "view source" command to be greyed out in this circumstance (as it is on another machine). But it works. When I "view source", I get an entry in the Temporary Internet Files folder with an "internet address" property of "view-source:https://myserver/...." and the content of the page. I wasn't expecting that. I can't understand why one machine is different to another in this regard. Obviously there is some environment/setup difference, but I can't track it down. Anyone have any bright ideas?

  Read the article

• Windows 7 boot manager not localized on UEFI systems

  - by Massimo

  I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

  Read the article

• Vim move cursor one character in insert mode without arrow keys

  - by bolov

  This might seem a little too overboard, but I switched to vim and I so happy about the workflow now. I try to discipline myself not to use the arrow keys, as keeping the hands on the alfa-keys all the time is such a big thing when writing. So when I need to navigate I get out of insert mode, move in normal mode and get back in insert mode. There is an exception where this is actually more disrupting: I use clang complete with snippets and super tab which is great. Except every time I get a function auto completed after I fill in the parameters I am left with the cursor before ) so to continue I have to move the cursor one character to the right. As you can imagine this happens very often. The only options I have (as far as I know) are : Escla or ?, and I am not happy about neither of them. The first one makes me hit 3 keys for just a simple 1 character cursor move, the second one makes me move my hand to the arrow keys. A third option would be to map CTRL-L or smth to ?. So what is the best way of doing this? //snippets (clang complete + supertab): foo($`param1`, $`param2`) //after completion: foo(var1, var2|) ^ ^ | | I am here | Need to be here | denotes cursor position

  Read the article

• disable mystery programs running at startup

  - by pstanton

  Hi and sorry for the ambiguous title... I have a few programs that should run at startup which are 'properly' configured to do so via adding shortcuts to the startup directory: C:\Users\[me]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup However I have (at least) 4 programs which are also starting up, which I can't find where they are configured or how to disable them. I have tried to find them in the above folder, as well as in the 'startup' section of 'msconfig'. The programs include: Skype (for which I have disabled 'start when windows starts' in its options) Thunderbird (for which I cannot find any option to run-at-startup) Task manager (as above) and some anonymous call to javaw (can't find any more details but it fails anyway) The other strange thing is that it seems like these (at least skype and thunderbird) are running 'as administrator' ... i have deduced this because I am unable to use the file-drag-and-drop feature in both (which is a known problem when running 'as administrator'). If someone could guide me to where these extra programs are configured to run-at-startup I would be very greatful! ps. my user account has the administrator role. EDIT: preferrably without another 3rd party tool...

  Read the article

• What method of MySQL mirroring should I use for this?

  - by user45745

  I'm running an web application hosting service (basically hosting forums for free), and I have two remote servers at my disposal. The code for the application is stored on both servers and isn't a problem, but I'm wondering how to deal with the databases. When someone goes onto a site *.example-host.com, they are sent to one of the two servers and both must be capable of loading the forums from a database. The database must also have write access, for when new members register or post topics etc. The main requirement is speed, but uptime is also important (if a server goes out, the site should still work). I have a few options, but I'm inexperienced and not sure which to go with: 1) [PHP] Split the forum records 50:50 between the two servers. If a server does not have the record for a forum requested, it can request it from the other by remote MySQL and load it. This idea sounded okay, until I realised that 50% of the time, users would be waiting significantly longer for pages to load. I also realised that if one of the servers went down, half the forums would be inaccessible and registrations would have to be disabled. 2) [MySQL] Dual master replication. This would attempt to mirror the two databases and sounds perfect, but I've heard that it can be very problematic. I don't know how fast this is. 3) [MySQL] Use a standard replication, distribute read only queries on both nodes and read/write queries to the master. This sounds like a good option, but again, I'm not sure on speed. I also don't know what would happen if the master server went down. If you have any other suggestions, please post them :)

  Read the article

• How to make a redundant desktop system with daily snapshots? (Is btrfs ready for use?)

  - by TestUser16418

  I want to configure a desktop system in which the home filesystem would be redundant (e.g. RAID-1), and would have weekly snapshots taken. I've already done this with ZFS, the snapshot system is wonderful, and with send/recv you can easily create backups on external media. Unfortunately, at that point, I want GNU+Linux and not FreeBSD or Solaris, so I'm looking for suggestions for good alternatives. I reckon that my alternatives are: btrfs - it seems to be exactly what I need, it has snapshots and commands that allow you to easily replicate zfs send. Yet all documentation mentions that it's still experimental. I can't seem to find any actual reports on its reliability or usability issues. Can you point me to any information on that issue that could clarify whether it would be a possible choice? I have a large preference for this option, mostly because I don't want to reformat the drives when btrfs becomes ready, but I there's no information on whether it's usable at all, whether it's a silly idea to use it, etc. The question that I cannot get the answer to is what does "experimental" mean. lvm snapshots and ext4 - preferably not, since it can consume an awful amount of space when new files are created. Creating 200 GB files requres 200 GB free space and 200 GB additionally for snapshots. I also have found it unreliable -- failed metadata rewrite results in an unreadable PV. I'm wondering how btrfs would compare here. A single filesystem (ext4) on a RAID-1 array with custom COW snapshots with hardlinks (like cp -al). That's my current preference if I can't use btrfs. So how experimental btrfs is, which should I choose, and do I have any other options? What if I don't keep external incremental backups, would that affect my choice?

  Read the article

• How to copy a floppy boot disk?

  - by Sammy

  I have a floppy boot disk and I would like to copy it to preserve it, as a backup. If I have two floppy drives, A and B, how can I copy the disk? Assuming one has two floppy drives Can I simply insert the floppy disk in one of the drives and then an empty floppy disk in the other and issue a simple command like this one. A:\>copy . b: Will this only copy the contents of the current directory and none of the files in subdirectories? Do I have to explicitly specify the option to copy everything? Also, what about the boot information? That won't get copied, right? If one has only one floppy drive... How do you copy a floppy disk if you only have one floppy drive? Do you in fact have to copy its contents to the local hard drive C and then copy that to an empty floppy disk using the same floppy drive? A:\>copy . c:\floppydisk A:\> A:\>c: C:\> C:\>copy floppydisk a: C:\> I'm guessing I will need some type of disk image tool to really copy everything on a bootable floppy disk. Something like the dd command on Linux perhaps? Am I right?

  Read the article

• Driver corruption when deploying Dell Touchpad Drivers (with software) during imaging process

  - by BigHomie

  We're an sccm shop, and use it to deploy Windows. When deploying Dell laptops (multiple models), the touchpad drivers seem install properly, but the software doesn't. The resulting problem is that when the touchpad is pressed on occasion, the mouse pointer will 'jump' to certain points on the screen. A possible symptom of this problem/visible sign is if the touchpad icon isn't in the system tray. The software is in the control panel, but when opened part of the gui is pixelated, indicating botched install maybe? The manual resolution to this, is to go into device manager and uninstall the driver with the option to uninstall all driver software. After a restart, the driver and software is apparently reinstalled, and from there works as expected. Obviously this partially defeats the purpose of a zero touch deployment. If anyone knows why this is and/or a possible workaround, those answers would be valid as well. Barring that, I want to find a way to deploy the driver and touchpad software in an unattended way, so that it can be conditionally installing during the imaging process. To be honest I'm not sure how to troubleshoot this, I suppose I could try drvinst.exe to install the driver, but finding out why this fails initially would keep me from spinning my wheels.

  Read the article

• Multiple Screen - Keyboard Sharing

  - by nhbdesign

  I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

  Read the article

• Centos 5.5 install PearDB

  - by John Gardeniers

  Disclaimer: I use Linux for some jobs but I am not a Linux admin. I have a Centos 5.4 machine which performs some server duties and doubles as a web site development machine. PHP 5.3.3 was installed from RPM with the --without-pear option. I now wish to use PearDB but can't figure out how to install it. If I run yum install php-pear-db, it comes back with Error: Missing Dependency: php = 5.1.6-27.el5_5.3 is needed by package php-devel-5.1.6-27.el5_5.3.i386 (updates). The only RPM I've found that looks like it might be close currently has a dead link, so I can't even try that. What would be the best way to go about this? Is there a way to reinstall from the RPM and include pear? Can I install the dependency without breaking the current installation? Should I try to uninstall the original PHP and reinstall it from source, complete with pear? I thought this might have been an SU question but the FAQ over there suggests otherwise.

  Read the article

• Change the logical name of sql server express 2005 database file?

  - by oob

  In Microsoft SQL Server Management Studio Express for Sql Server Express 2005, I needed to copy a database for testing and keep it on the same server as the old database. I did the following: Right Click on Databases Created new database Detached the database I wanted to copy "Restored" my new database from the backup file of my old database. I did this by clicking the 'Overwrite the existing database' box on the Options pane, and I changed the paths in the 'restore as' options so that they pointed to my new .mdf and .ldf files. Everything is working like I want. Problem is, when I right-click - Properties - Files on my new database, the logical name of the .mdf file is the same as the logical name of the old .mdf file. They are actually different files - they just share the same logical name? I guess maybe this isn't a short-term problem, but I can see it confusing somebody down the road. Any way to change the logical name of the .mdf file? UPDATE EDIT - Apparently you can just change the logical name through the GUI by, get this, clicking on it and typing a new name. I could swear that was not possible when I posted this, but maybe it was and I somehow missed it! Either way - the solution below should still work but doing it through the GUI is also an option.

  Read the article

• Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

  - by xhyperx

  The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

  Read the article

• What is the alternative of Apache's global Alias in IIS? (e.g. Alias /phpMyAdmin "c:/AppServ/www/phpMyAdmin")

  - by Sk8erPeter

  I know there's an "Add Virtual Directory..." option in every given sites in IIS with which I can set up e.g. phpMyAdmin's path to be reached with prepending /phpmyadmin to the address (e.g. http://example.com/phpmyadmin), but isn't there a "global" setting similar to Apache's Alias? For example, in Apache this setting looks like this: <IfModule mod_alias.c> Alias /phpMyAdmin "c:/AppServ/www/phpMyAdmin" Alias /phpmyadmin "c:/AppServ/www/phpMyAdmin" </IfModule> This way I reach phpmyadmin with every hosts. (http://example1.com/phpmyadmin, http://example2.com/phpmyadmin also does work) But in IIS, do I have to add a virtual directory to every sites? I'm just curious, because we would like to serve some domain's content, so there would be multiple sites. It would be more comfortable to do it once (or have the opportunity to remove it once), but if I have to, I do add a virtual directory for each sites. (I know, maybe it's the better solution, because I can have a site where I don't want phpmyadmin to be available, but I was just curious.) Thanks in advance!

  Read the article

• Windows Update broke Wirless driver - Can't get it working again

  - by private_meta

  I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

  Read the article

• How can I change the default program installation directory in Windows 7?

  - by Max

  Windows 7 is installed on my C drive, which is quite small. I am very tired of instructing new programs to put their files on my larger D drive during installation; I would like to change the default drive. This article says that you can use a registry hack, but I am giving Microsoft the benefit of the doubt and naively assuming that a configuration option exists somewhere. It's 2010... do I really have to hack my registry to make a simple tweak like this? Also, there's a ServerFault question that explains how to move the "Users" directory and create a symlink, which could also work. However, at the moment I have some apps in C:\Program Files, some apps in C:\Program Files (x86), and some apps in the corresponding folders on D:\, so it would be a hassle. Also, my small OS boot drive is a 10k RPM WD Raptor, and I feel like that probably gives a speed boost to apps installed on it that need to read & write to their directories a bunch. I wonder if it actually matters.

  Read the article

• Concatenating gziped Apache logs

  - by markdrayton

  We rotate and compress our Apache logs each day but it's become apparent that this isn't frequently enough. An uncompressed log is about 6G, which is getting close to filling our log partition (yep, we'll make it bigger in the future!) as well as taking a lot of time and CPU to compress each day. We have to produce a gziped log for each day for our stats processing. Obviously we could move our logs to a partition with more space but I also want to spread the compression overhead throughout the day. Using Apache's rotatelogs we can rotate and compress the log more often -- hourly, say -- but how can I concatenate all the hourly compressed logs into a running compressed log for the day, without decompressing the previous logs? I don't want to uncompress 24 hours' worth of data and recompress it because that has all the disadvantages of our current solution. Gzip doesn't seem to offer any append or concatenate option but perhaps I've missed something obvious. This question suggests straight shell concatenation "works" in that the archive can be decompressed but that gzip -l doesn't work seems a bit dodgy. Alternatively, perhaps this is still a bad way to do things. Other suggestions are welcome -- our only constraints are our relatively small log partitions and the need to provide a daily compressed log.

  Read the article

• Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

  - by xhyperx

  The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

  Read the article

• Ubuntu loading stops ?

  - by joxnas

  I don't know why, or how... but my ubuntu's loading / booting stops right after the ubuntu logo appearing.. An underscore appears in the right top of the screen: _ then, it disappears leaving the whole screen black Version is 9.10 ,Kernel is .20 I have tryed recovering mode and selected recover damaged packages option, but it didn't do any good.. I have very important files in Ubuntu that I need to copy to a pen drive or something, today.. The terminal mode is working, so i think i can do this there.. My questions: How can I get my Ubuntu to load? Is it possible to copy the files i need via terminal mode? I dont know if with other of the previous kernels it would work... but I had configured my grub (inside Ubuntu's gui) to show only the last kernel... and now i can't select any other kernel then .20 because I don't know a way to configure Grub unless via Ubuntu's gui... My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core duo 4Gb DDR2

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >