Search Results

Search found 2066 results on 83 pages for 'cable'.

Page 54/83 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Output to TV only works if monitor is plugged in

  - by Greg Sansom

  I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

  Read the article

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Link bonding across multiple switches?

  - by Bryan Agee

  I've read up a little bit on bonding nics with ifenslave; what I'm having trouble understanding is whether there is special configuration needed in order to split the bonds across two switches. For example, if I have several servers that all have two nics each, and two separate switches, do I just configure the bonds and plug 1 nic from each into switch #1 and the other from each into switch #2? or is there more to it than that? If the bonds are active-backup, will a nic failure on single machine mean that server may become disconnected since the rest of the machines are using the primary nic and it's using the secondary? Or do you link the switches with one cable as well?

  Read the article

• 2wire modem to linksys router

  - by Imajica666

  I want to hook a Linksys router to my 2wire modem/router (2701HG-b) to share my Internet connection. I ran from an open port from the 2wire to the WAN port of the Linksys but it will not work. I did this before with my cable modem to a router to my Linksys router. It worked then but not now. I read I can turn the 2 wire into a modem only but I need the 2wire wireless access also. IPCONFIG /ALL sees the 2wire with IP info as well as DHCP server/gateway. Any ideas?

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

• GPO: Disable WiFi when computer is connected to LAN with wire

  - by r0ca

  Hi all! Is anyone of you know how to disable, thru a GPO, the Wireless connection as soon as the computer is connected to the LAN with a wire. By example, a user is at home with his laptop, connected to his home wifi connection. He leaves and comes to the office but the Wifi is still enabled. He plugs the ethernet cable in the computer and then, both wifi and wire connection are enable. I would like to apply a GPO that does this... Thanks a bunch!

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• Recover data from phyiscally damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: Picture of damage I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a phyiscally damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are.

  Read the article

• How much does it wear an SD card to be frequently removed/reinserted?

  - by jtbandes

  My digital camera (a Sony a55) stores photos on an SD card. When I want to transfer these to my computer (a mid-2010 MacBook Pro), I have two options: use the USB cable to connect the camera to the computer, or use the computer's built-in SD card reader. The camera's SD card slot is the standard click-in, click-out (spring-loaded) mechanism. My laptop has a simple slot into which the card slides with a little more resistance than the former (the card slides only about halfway in so it can be easily removed). I notice that the card's contacts now have some shiny marks from one or both of these card slots: Does this type of wear threaten to significantly damage the card? Should I avoid switching the card between slots frequently, to extend its lifetime?

  Read the article

• How to make phone calls using a pc, modem, headphone and no actual phone instrument

  - by user18151

  Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• What is the type/classification/term for an PC headset that does not go over the head or back of the

  - by FMFF

  How do I search in the leading auction site for the PC headset(earpiece + microphone) that does not have a band to go around or over your head - instead it is entirely like a cable, with the microphone attached in one of the wires leading from the ear piece? How is it called? I'm not talking about Bluetooth wireless headsets. I have one from Plantronics I got years ago, which they stopped making and I want another one, but don't know how to search. Simply searching for HeadSet or similar terms, brings mostly the newer ones which I don't want. Thank you.

  Read the article

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

• What do I need to connect a hard disk to my laptop via non powered eSata?

  - by Ludo

  Hi there. I'm looking at getting a hard disk for my laptop (OCZ Vertex 2 SSD) which I would like to connect via eSata. My laptop has an eSata port, but it's not powered (Thinkpad T410). I presume this means I need more than just an eSata to eSata cable as it needs power, so does this mean I need a caddy for the hard disk as well which will provide power to the drive, or do I need one of them eSata cables that has a USB attachment too? I don't think the drive will come with a power supply. I realise this seems simple but I can't find an obvious answer online. Thanks for any assistance! Ludo.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

  Read the article

• Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

  - by marc

  I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Wireless bridge between two prolink adsl modem/router

  - by MyName

  Allright, so i've got 2 prolink hurricane h5004n. Its a broadband adsl modem and router. My Pc is connected to the first one via ethernet. What i want to do is a wireless bridge to make the 2 routers "talk". I've tried hooking up the dsl cable (as they are modems) in both to try but when one disconnects as the other connects. I don't really know about the configurations to be done of all the DCHP or RIP and NAT forwarding stuffs. (i'm just writing what i saw) In short i want the second router to act as a wifi repeater but i don't see any repeater option and i also do not want to connect them via ethernet. So is it possible to do something? Apart from buying another repeater i don't want to spend anymore i'm done :S

  Read the article

• Connecting switch to switch to router

  - by elated

  Hello, Not sure if this is the right place to ask this question. But I have a router which connects to the internet. Now I have a switch connected to this router. I added a lot more computers so I added another switch and connected it to the first switch using a cross-over cable. As soon as I connect it to the first switch, my lights in first switch start blinking like crazy and my entire network simply stops working. The minute I remove the second switch's wire, its all fine again. What could be the problem?

  Read the article

• Apple file sharing: bind to a specific interface

  - by Cesar

  My customer have an office small office with just a wifi router. He use this router for internet connectivity and file transfer operations between the desktops. Recently the file transfer activity between desktop (all osx based) is increased a lot so he bought a switch (no connected to the router, too far away) for transfer the file over the cable instead over the wifi. Problem: How to bind the file sharing service just to the Ethernet interface and exclude the wifi interface ? (actually the service binds to the wifi automatically and there are no options about the interface binding)

  Read the article

• Trouble with resolving hostnames on CentOS using Bind

  - by cabaret

  I'm taking a course on server administration at school and I have managed to set up virtual hosting in apache and a dns server on a virtual machine. However, I have now set up an old pc to run CentOS and I'm trying the same on that box. The problem I ran into now is that I can't resolve hostnames from the linux box. I have set up the nameserver in /etc/resolv.conf to the IP of the CentOS machine, but when I try for example ping google.com I get ping: unknown host google.com However, when I do ping 66.102.13.105 (which is the Google IP, figured that out by pinging on my mac) I get: PING 66.102.13.105 (66.102.13.105) 56(84) bytes of data. 64 bytes from 66.102.13.105: icmp_seq=1 ttl=52 time=15.5 ms Slightly confused why this is happening. Could it be because of my router sitting in between the linux machine and the cable modem? It's a D-Link somethingsomething. Thanks in advance

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >