Search Results

Search found 2066 results on 83 pages for 'cable'.

Page 59/83 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• After turning my monitor off and on, it will display only a white screen

  - by Narf the Mouse

  About a month after installing a new graphics card, I started encountering a rather frustrating problem. Namely, if I turn my monitor off for any significant length of time, then turn it back on, it displays only a white screen. Previously, restarting could fix the problem. However, after leaving the computer off last night, the problem persists. An internet search turned up this site; however, the monitor cable is not loose. As for the insides of the monitor - Well, I could poke around, but I risk making it worse if it's not the monitor. Any such instructions should be clear, detailed and include pictures. Further updates as events warrant.

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• If the WiFi switched on, should it disable the ethernet? [closed]

  - by Peter Stuart

  My friend having problems with her laptop and I am trying to help her via SMS. She can't get her laptop connected to the internet via the Ethernet connection and there is no WiFi in the area. Could it be because her WiFi is switch on, she is using an acer aspire. If she manually switches it off could that allow the ethernet connecttion to work? Or is it a missing driver? The cable works fine as her someone else tried it. Thanks Peter

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• How to get rid of disturbance on LCD monitor?

  - by Uday Kanth

  I have an Acer G195HQL LCD monitor and recently I've been noticing a lot of disturbance on the screen. They appear to be like flickering horizontal white lines. These lines are more apparent on dark backgrounds like grey/black. The curious thing is that, the intensity of these lines increases and decreases with no specific pattern. The disturbance temporarily goes away when I detach and re-attach the VGA cable at the CPU end. My speakers are magnetically shielded, but the problem persists even when I turn them off. I don't know what to do and this is really annoying me. Is it possible that my monitor is failing? Or is there anything I should check?

  Read the article

• Controlling TV Channel Through Computer

  - by killianmcc

  I'm passing my TV input through my computer so that I can use the video stream in an application I'm creating which then outputs to my TV. E.g. Sky Digibox/FreeView box - Laptop - TV Where on my laptop I'll be using the stream in a WPF application so I can overlay XAML objects onto it. My question is, what would be the best way for me to send the signal back to the box to say change the channel for example? I don't want to have to use the remote, I want the computer to handle everything. Is there a standard cable these boxes have that could take what would normally be a remote control signal and use that as input instead? Or would I have to go down the route of looking at some sort of Infared LED to send the signal recreating the remote? Apologies if this is not clear enough, let me know and I'll try and be more precise.

  Read the article

• Unknown device error installing Lexmark printer in Vista

  - by packotjimmy

  I have been using Lexmark X3650 All-In-One on my Windows Vista Desktop PC for a year without problem. Yesterday, I was prompted to plug in the USB from the printer and after that I got errors: "The USB device has malfunctioned." ,"The unknown device has been installed unsuccessfully.". Then, the printer just stoped responding. I have uninstalled the driver from Device Manager and software (using Lexmark's clean utility), rebooted, reinstalled, same thing, tried different ports/cable. Vista displays these two errors stated above immediately upon plug in. Please help me!

  Read the article

• Laptop held hostage by administrator domain and Bit locker

  - by user144780

  I have a laptop computer that I had when I was working at an IT company. I don´t work there anymore but I could keep the computer (Lenovo) Suddenly my wireless internet didn´t work anymore showing error "insert SIM into the mobile broadband device" and month later connectiong to internet with cable got disabled I don´t know the password to sign in as an administrator on domain and whatever I try to do/install/change settings... everything needs admin rights. To surf the internet again with the computer I tried to install a new Windows but it´s seems to be protected with Bit Locker, asking for recovery key. I´ve googled and googled bunch of CMD tricks but most of the shows "system error 5 has occured" Is there anyway to get the wireless internet to work, change the admin or install new Windows? - or should I rather enjoying throwing it of the balcony or set it one fire? :)

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• External speakers no longer working

  - by Mark Robinson

  We have a Windows Vista laptop. On Monday we hooked it up to external speakers, as we always do, and they worked fine. On Tuesday, we did the same but then the speakers did not work. Weirdly, the laptop internal speaker does work. Nothing was changed between Monday and Tuesday. What happened and, more importantly, how can it be fixed? BTW we tested with other speakers (and cable) and that didn't help. So it seems like a laptop issue.

  Read the article

• How can I connect a wired PC to the internet through my Macs wifi connection?

  - by David Weitz

  So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

  Read the article

• iPhone Docked Playing Through PC, Buzzing.

  - by DrFloyd5

  Hi. I have an iPhone that I fit into an Apple dock. There is an audio cable from dock into the line in on my sound card. My headphones are plugged into the line out. I get this really quite buzz that is fairly constant, but changes as the iphone "does stuff". It's not so bad when the music is playing. But when it stops I get the buzz, so I can't really use my headphones as "noise cancellation." It doesn't help to change my volume sliders on the PC. Any ideas? Thanks in advance.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Does Google Tv (NSZ-GS7) work with HTPC?

  - by Mark Trinh

  I was wondering if my Google Tv will seamlessly work with my HTPC. I'm running Windows Media Center using a InfiniTv quad tuner with a cable card. I'm able to connect my GTV with my HTPC and be able to see the GTV interface overlaid on top of media center. Unfortunately, I'm not really able to use the Tv/Movies App to look at live shows and change the channel. I have the Video device setup as Media Center PC, but then the Live Tv App doesn't work. If I change to my tv service provider (Verizon FIOS), the Live Tv App works, but then it won't be able to change the channel.

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• netgear GS108TV2 RSTP configuration

  - by jhowland

  I have a large set of GS108TV2 units--my goal is to set up a network which is comprised of several loops for redundancy/fault tolerance. I have a minimal 3 switch loop configured, with RSTP enabled on two ports on each switch. I have my bridge max age set to 6, and my bridge forward delay set to 4, which are the minimum values allowed. Hello time is fixed at 2 seconds. The switches respond to a cable being removed from a socket, but it takes too long. I cannot get the switch to respond to a loss of connection on one of the redundant ports in less than 20 seconds. Is there any way to configure these switches to respond faster than 20 seconds? That is unacceptable for my application. thanks in advance for any help

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Windows 8.1 triple monitors - can't enable all 3 at the same time

  - by Jeckerson

  Today decided to update from Win8 Pro to Win8.1. Everything was fine with enabled 3 monitors (Extended mode, not Eyefinity) at the same time. But after update can't enable 3d monitor, only 2 could be enabled at the same time. Did current things before write question here: Remove all drivers, reboots, re-installs Different cable input's and orders of enabling Tried to enable each monitor from Catalyst and Windows Screen Resolution Spec's: Windows 8.1 Pro XFX HD7970 3 of LG E2442 Cables: 2 DVI 1 HDMI Googled for many time and found one of possible solution is to buy ACTIVE mini DisplayPort to DVI/HDMI, but maybe there are some another more simple solutions?

  Read the article

• second monitor wont display [closed]

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• Video streaming over multi display units

  - by ramdaz

  We have to share video across around 4/8 terminals at a public facility where we need to display live video from within the facility, as well as display messages(advertisements), and also play videos(not live) which need to be controlled centrally from another location. We can do central location handling over Internet, over ssh. What we want to do is connect cameras to a computer, and use the computer to display over multiple display units. We need to do live titling if possible. Once the live local telecast which usually takes about an hour or two a day, we would like to play other videos locally off the PC server. Preferably everything should run off Linux, since budgets are very constrained.... Addendum -- Its not over WAN, it's over a local area. I prefer not using LAN, we would rather use co-axial cable if possible. The reason is if it's LAN, I need some kind of an Networking device, at least a thin client

  Read the article

• PCI IDE Controller

  - by mercutio

  I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

  Read the article

• How can I access my desktop computer from my Android phone?

  - by Qurben

  Is it possible to access a computer connected to the internet through an Android phone? (the internet goes through the phone by tethering) I want to use ssh to connect to the computer (from a different computer in the same network), but I am not able to access the computer. Is it possible to portforward, use some kind of transparent proxy or to use DMZ? My phone is rooted and I have Cyanogenmod installed and I can use iptables. EDIT: The changed title completely changed the question! My setup is the following: I have an android phone connected to a computer through the usb cable tethering internet from the phone, I wanted to ssh into the computer behind the android phone from another computer in the same network as the android phone. This was not possible, because the android phone creates a separate network for the connected computer, effectively shielding it from any incoming signals. It turned out to be quite simple to fix by just using iptables.

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >