Search Results

Search found 27958 results on 1119 pages for 'failed to load viewstate'.

Page 54/1119 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Failed to connect from slave to master with error "error connecting to master (1045)"

  - by Victor Lin

  I try to setup replication from slave to the master. CHANGE MASTER TO MASTER_HOST = 'master', MASTER_PORT = 3306, MASTER_USER = 'repl', MASTER_PASSWORD = 'xxx'; And I did grant privileges to the user on master. I can connect with mysql command from slave machine to the master mysql -h master -u repl -p mysql> show grants; GRANT RELOAD, SUPER, REPLICATION SLAVE, CREATE USER ON *.* TO 'repl'@'xxx' IDENTIFIED BY PASSWORD 'xxx' mysql> select 1; +---+ | 1 | +---+ | 1 | +---+ 1 row in set (0.04 sec) As you can see, privileges are correct, connection works fine, but however, the connection for replication to master always failed. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: Read_Master_Log_Pos: 4 Relay_Log_File: slave-replay-bin.000002 Relay_Log_Pos: 4 Relay_Master_Log_File: Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 0 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master:3306' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec) Is this caused by different version of MySQL server? The version of master is 5.0.77, and the slave is 5.5.13. But all articles I could find tell me that it's okay to replicate from a newer slave to old master. How to solve this problem? -- Update -- I even try to upgrade the old MySQL, but still, the problem is not solved. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: master-bin.000007 Read_Master_Log_Pos: 107 Relay_Log_File: slave-replay-bin.000001 Relay_Log_Pos: 4 Relay_Master_Log_File: master-bin.000007 Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 107 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec)

  Read the article

• Failed loading ioncube

  - by time

  I recently upgraded a small server to Ubuntu 12.10 (from 12.04), thus upgrading PHP from 5.3 to 5.4. However, I'm getting this in root's mailbox several times a day: Subject: Cron <root@xxxxxxx> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -ignore_readdir_race -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> Message-Id: xxxxxxxxxxxxxxxxxxxxxxxx Date: Sun, 9 Dec 2012 05:09:02 -0500 (EST) Failed loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: undefined symbol: php_body_write I assume that's coming up because it's for PHP 5.3. How can I just get rid of ioncube? I have no need for it, I don't even remember installing it. That .so file doesn't exist, and I've grep'd several locations for "ioncube" and I can't seem to figure how to stop that message from flooding the mailbox.

  Read the article

• OpenLDAP replication fails, "syncrepl_entry: rid=666 be_modify failed (20)"

  - by Pavel

  I've configured a second host to replicate the main LDAP server via syncrepl in the slapd.conf: syncrepl rid=666 provider=ldaps://my-main-server.com type=refreshAndPersist searchBase="dc=Staff,dc=my-main-server,dc=com" filter="(objectClass=*)" scope=sub schemachecking=off bindmethod=simple binddn="cn=repadmin,dc=my-main-server,dc=com" credentials=mypassword When I restart slapd, it writes to /var/log/debug Jun 11 15:48:33 cluster-mn-04 slapd[29441]: @(#) $OpenLDAP: slapd 2.4.9 (Mar 31 2009 07:18:37) $ ^Ibuildd@yellow:/build/buildd/openldap2.3-2.4.9/debian/build/servers/slapd Jun 11 15:48:34 cluster-mn-04 slapd[29442]: slapd starting Jun 11 15:48:34 cluster-mn-04 slapd[29442]: null_callback : error code 0x14 Jun 11 15:48:34 cluster-mn-04 slapd[29442]: syncrepl_entry: rid=666 be_modify failed (20) Jun 11 15:48:34 cluster-mn-04 slapd[29442]: do_syncrepl: rid=666 quitting I've looked into the sources for the return code and found only #define LDAP_TYPE_OR_VALUE_EXISTS 0x14 in include/ldap.h. Anyway, I don't quite get what the error message means. Can you help me debugging this problem and figure out why the LDAP replication doesn't work? I've managed to put a "manual" copy via slapcat and slapadd into the database, but I'd like to sync automatically. UPDATE: "Solved" by removing /var/lib/ldap/* and re-importing the database with slapadd.

  Read the article

• Ubuntu upgrade process failed

  - by Spin0us

  I tried to dist-upgrade my ubuntu server on my percona cluster but it failed with this message The following packages have unmet dependencies: libmysqlclient18 : Depends: libmariadbclient18 (= 5.5.33a+maria-1~precise) but it is not installable And here is the package listing # dpkg --list | grep -E 'percona|mysql' ii libdbd-mysql-perl 4.020-1build2 Perl5 database interface to the MySQL database iU libmysqlclient18 5.5.33a+maria-1~precise Virtual package to satisfy external depends ii mariadb-common 5.5.33a+maria-1~precise MariaDB database common files (e.g. /etc/mysql/conf.d/mariadb.cnf) ii percona-xtrabackup 2.1.5-680-1.precise Open source backup tool for InnoDB and XtraDB ii percona-xtradb-cluster-client-5.5 5.5.31-23.7.5-438.precise Percona Server database client binaries ii percona-xtradb-cluster-common-5.5 5.5.33-23.7.6-496.precise Percona Server database common files (e.g. /etc/mysql/my.cnf) ii percona-xtradb-cluster-galera-2.x 157.precise Galera components of Percona XtraDB Cluster ii percona-xtradb-cluster-server-5.5 5.5.31-23.7.5-438.precise Percona Server database server binaries ii php5-mysql 5.3.10-1ubuntu3.8 MySQL module for php5 During the install of the server, mariadb and galera cluster have first been installed. Then removed to be replaced by percona XtraDBCluster. So i think this is the source of the problem. But how can i resolve this without reinstalling all ? UPDATE 1 # apt-cache policy libmariadbclient18 libmariadbclient18: Installed: (none) Candidate: (none) Version table: 5.5.32+maria-1~precise 0 100 /var/lib/dpkg/status

  Read the article

• Blink build with Xcode failed

  - by Merci

  I found a GPL-ed SIP client for Mac, Blink. I'd like to build it from source since the binaries are only available as paid download. Just FYI i'm studying programming at university but have no experience in building complex application from source. After downloading the content of the repository i opened the Xcode project and tried to build on OS X 10.7, Xcode 4.2.1. Unfortunately the build fail with 1 error and many warnings Most of the warnings are like this: Attribute Unavailable: Custom Identifiers in Interface Builder versions prior to 3.2 The error message is: Apple Mach-O Linker (ld) Error Command /Developer/usr/bin/clang failed with exit code 1 preceded by the warning Apple Mach-O Linker (ld) Warning directory not found for option '-L/Users/Sergio/Downloads/Blink/devel.ag-projects.com/repositories/public/blink-cocoa/Distribution/Frameworks' I notice that in the list of required files i have this files missing: Dependencies/Frameworks libgcrypt.11.6.0.dylib libgcrypt.11.dylib libgnutls-extra.26.dylib libgnutls.26.dylib libgpg-error.0.dylib libintl.8.dylib liblzo.1.dylib libtasn1.3.dylib Dependencies/Resources lib Frameworks/Linked Frameworks Sparkle.framework Products Blink.app It should be possible to download these files somewhere. Unfortunately googling did not help. There's no documentation on the project site.

  Read the article

• Postfix enable SSL 465 failed

  - by user221290

  I have installed the Postfix and enabled SSL/TLS, just tested, I can sent email from port 25, 578, but cannot sent email from port 465, the log is: May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 write server hello A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 write certificate A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 write server done A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:SSLv3 flush data May 26 17:24:06 mail postfix/smtpd[28721]: SSL3 alert read:fatal:certificate unknown May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept:failed in SSLv3 read client certificate A May 26 17:24:06 mail postfix/smtpd[28721]: SSL_accept error from unknown[10.155.36.240]: 0 May 26 17:24:06 mail postfix/smtpd[28721]: warning: TLS library problem: 28721:error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown:s3_pkt.c:1197:SSL alert number 46: May 26 17:24:06 mail postfix/smtpd[28721]: lost connection after CONNECT from unknown[10.155.36.240] May 26 17:24:06 mail postfix/smtpd[28721]: disconnect from unknown[10.155.36.240] My email server is: 10.155.34.117, and email client is: 10.155.36.240, the client error is: Could not connect to SMTP host: 10.155.34.117, port: 465. My Master.cf: smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes My main.cf: smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_key_file = /etc/pki/myca/mail.key smtpd_tls_cert_file = /etc/pki/myca/mail.crt smtpd_tls_CAfile = /etc/pki/myca/cacert_new.pem smtpd_tls_loglevel = 2 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_tls_session_cache_database = btree:/etc/postfix/smtpd_scache Seems it's my certificate issue, but I have tried to grant the file many times...I have no idea on this, please help!

  Read the article

• Windows VirtualBox failed to attach USB device to Linux Guest

  - by joltmode

  I have Windows 7 64bit Host system, and I am using VirtualBox 4.1.18 (r78361). I have an Arch Linux Guest OS. I have installed VirtualBox Extension Pack (to enable USB2 support) and added my USB device filter to VM. I have also installed the Guest Additions provided by Arch: virtualbox-archlinux-additions (but I have no idea whether it's actually needed for my environment). I can see my USB device from VirtualBox Devices menu. Whenever I am trying to access it, I end up with: Failed to attach the USB device Kingston DT 100 G2 [0100] to the virtual machine Archlinux. USB device 'Kingston DT 100 G2' with UUID {a836ec33-0f41-4ca7-a31d-09cceaf5d173} is busy with a previous request. Please try again later. Details ? Result Code:    E_INVALIDARG (0x80070057) Component:      HostUSBDevice Interface:      IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee:         IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} From what I have googled, most guides shows how to solve this the other way around - Linux Host to Windows Guest. How do I resolve this? Update I have tried to Eject (virtually, not physically) the device from my Windows Host system and then try to access the Device from Guest. Same error.

  Read the article

• Trying to install datastax opscenter - Failed to load application: cannot import name _parse

  - by gansbrest

  I'm not familiar with python, maybe someone could explain what's going on here? ec2-user@prod-opscenter-01:~ % java -version java version "1.7.0_45" Java(TM) SE Runtime Environment (build 1.7.0_45-b18) Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode) ec2-user@prod-opscenter-01:~ % python -V Python 2.6.8 ec2-user@prod-opscenter-01:~ % openssl version OpenSSL 1.0.1e-fips 11 Feb 2013 And now the error ec2-user@prod-opscenter-01:~ % sudo /etc/init.d/opscenterd start Starting Cassandra cluster manager opscenterd Starting opscenterdUnhandled Error Traceback (most recent call last): File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/lib64/python2.6/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/lib64/python2.6/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/lib64/python2.6/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "bin/start_opscenter.py", line 1, in <module> from opscenterd import opscenterd_tap File "/usr/lib/python2.6/site-packages/opscenterd/opscenterd_tap.py", line 37, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/OpsCenterdService.py", line 13, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/ClusterServices.py", line 22, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/WebServer.py", line 40, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/Agents.py", line 18, in <module> exceptions.ImportError: cannot import name _parse Failed to load application: cannot import name _parse Maybe there are open source alternatives to monitoring cassandra I should look at? Thanks a lot

  Read the article

• Windows + Django + mod_wsgi = "DLL load failed"

  - by Kyle MacFarlane

  For a long time I was using Python 2.5 to do all this fine but recently upgraded to 2.7 since building stuff for 2.5 is a real pain. I also updated mod_wsgi to 3.3 for Python 2.7. Everything is working fine with Apache + mod_wsgi on CentOS and also in the Django runserver on both Windows and CentOS, but not with Apache + mod_wsgi on Windows. Whenever I try to access a page in my Django app I get the following (note that Apache starts fine): ImportError at / DLL load failed: The specified module could not be found. Which is caused by things like: from Crypto.Cipher import AES Etree and others cause the exact same error and it is not limited to any specific packages. Anything with pyd files fails. Googling around suggests reinstalling Python "for all users", but the installer doesn't give you that option anymore anyway. For good measure I've tried reinstalling Python 2.7 as an administrator and also told it to register itself as the default version of Python but neither helped. I think the solution might have something to do with: The fact that I have 2.5, 2.6 and 2.7 installed on this machine and mod_wsgi might be loading the DLLs for 2.5 instead of 2.7. Something to do with WSGIPythonPath, which I usually don't need to set.

  Read the article

• Connection failed between Windows Servers

  - by Kerby82

  I'm setting up an infrastructure based on Windows Server 2012. The firewall is turned off and I can't access the Domain controller to check for the group policy. I'm experiencing some connection problem between servers. All the servers are running a site on the TCP Port 80 and I check with netstat that the web server is binding on every Ip of the servers. If i try to telnet from the server itself on the port 80 it works (using DNS name) if I try same telnet from another machine I get connection failed. The DNS works, the ping is successfull, the servers are on the same subnet, the firewall is turned off (even though windows advanced firewall says that some settings can be managed by the System Administrator, i guess group policy). I don't know how to troubleshoot further. Do you have any idea? Is that possible that the FW looks turned off but there are some group policy blocking the connections? (I also check group policy-Administrative Template-Network Connections- Windows FW everything is not configured) I need some hint on how to keep troubleshooting such a problem.

  Read the article

• RPC Server Unavailable on Hyper-V cluster when moving resources after the host adapter has failed

  - by Doug Luxem

  On a Windows 2008 R2 SP1 cluster running Hyper-V, a lost network connectivity on the primary host interface. The interface was rapidly flapping up and down, and this was later determined to be caused by a faulty switch port. As this was a clustered server, the host interface was not fault tolerant (seeing as how the whole server was fault tolerant), so connectivity to the host was going up and down. The Hyper-V guests were completely unaffected by the network outage as they used a dedicated trunk on the server separate from the host interface. Additionally, dedicated interfaces for the cluster and live migration networks were fine. In order to diagnose the server, I tried to move all resources (Hyper-V Guests) to other nodes through Failover Cluster Manager. These moves failed with an error RPC Server Unavailable. The only way to move resources was by shutting down the guests, stopping the cluster service on the Node A, allowing other nodes to take ownership of the resources, and restarting the guests. A few other notes: All nodes have Client for MS Networks and File & Printer Sharing enabled on the Cluster and LM networks. Node A was accessible over cluster and LM networks from other nodes (these are private, cluster-only networks); pingable, CIFs, etc. Accessing \\NODEA is done over the Host adapters, as you would expect in this case and is the reason for the RPC Server Unavailable error with that adapter being down. My questions here are - Is there a way to still use Live Migration in a failure scenario such as this to prevent shutting down the Hyper-V guests? How can the network be reconfigured in the future so that the cluster service attempts to use the cluster and/or live migration networks to issue the RPC requests?

  Read the article

• PHP application failed to connect after a network plugged back in

  - by tntu

  My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

  Read the article

• LSI1068E hidden drives after failed raid volume creation

  - by silk

  We are using LSI 1068E raid chipset with SAS drives. We had added new drives to the system, and tried to create new raid volume with the lsiutil, unfortunately the creation failed. The problem is that now we do not have the new raid volume and disks 'disappeared' and are not available as targets for raid. Lsiutil option 8 (scan for devices) does not display these disks at all. lsiutil option 16 (display attached devices) does list them as targets. lsiutil option 21+30 (create raid) does not list these disks. Just after insrting them to enclosure these disks appeared in the system, as expected. During the raid creation kernel logged: Mar 4 08:40:02 kilo kernel: [57555.687946] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 2 id=0 Mar 4 08:40:02 kilo kernel: [57555.687978] mptbase: ioc0: PhysDisk has been created Mar 4 08:40:02 kilo kernel: [57555.695438] scsi target0:0:2: mptsas: ioc0: RAID Hidding: fw_channel=0, fw_id=0, physdsk 2, sas_addr 0x5000c50008ebe5fd for both of them, again as expected. Unfortunately they did not appear back even though the volume was not created. The same situation is in the controller's bios after a reboot. Taking the disks out and inserting in different slots did not help, either. Has someone seen a similar problem? And knows how to 'get back' our disks?

  Read the article

• 412 Precodition Failed error only occurs on certain networks

  - by Andy

  One of my favorite websites: http://jessiejofficial.com (yes, I'm a Jessie J Fan :')) has recently started displaying the error message "412 Precondition Failed" whenever I visit it from my home network, even when I use Tor Browser. At first I thought that this was an issue with the whole website, however I have contacted the web developer and he has said that they has been plenty of hits within the last 48 hours. Plus, I discovered tonight that I can access the website from my phone, through the mobile network. So it appears to just be my network as all of the devices in my house connected to the WiFi display the same error when I try to visit any page of the site. However there have been no changes that we are aware of or are noticeable to our network since the website was accessible, and I have just heard that another person in a different part of the country is experiencing the same difficulties also. Any help/advice/suggestions would be appreciated greatly Update: When trying to ping 'jessiejofficial.com' in Windows command prompt the request times out on all four attempts, on any computer connected to the wireless network. I can now also confirm that the same thing occurs on my MacBook Pro.

  Read the article

• Linux RAID: Replacing Failed Drive...permanantly

  - by user137519

  Okay, odd question here. I have a server with RAID 5. A drive failed, in a really physically in a really odd way. On the machine it boots and is seen by the BIOS but...no partition can be seen on the drive consistantly (in and out). 2 out of 3 drives working...I made new spare disk and added it, RAID 5 rebuilt clean. All appears well but...when I reboot it keeps trying to use the 2nd drive which doesn't give any partition data, so of course the RAID 5 gets 2 out of 3...again. The status of my drive is as follows: /dev/sda2:Good /dev/sdb2 (drive has physical problem so no partition data) bad, /dev/sdc2:good /dev/sdd2:good. Every time I reboot the mdadm system seems to keep trying to use /dev/sdb which has physical failure (although spins and is detected). /dev/sdd is the new drive I created. I added /dev/sdd to the raid and it rebuilds the raid but this action isn't memorized upon reboot so it keeps listing /dev/sda and /dev/sdc but doesn't use the perfectly good /dev/sdd until I re-add manually. I've tried removing the dead drive with the mdadm tool, but as it cannot see /dev/sdb paritions it will not fail or remove it (says partition doesn't exist). the /etc/mdadm.conf was automatically made on the original OS install which only lists: DEVICE partitions MAILADDR root ARRAY /dev/md2 super-minor=2 ARRAY /dev/md0 super-minor=0 ARRAY /dev/md1 super-minor=1 Basically just the raids to use on boot. I need to remove this semi-dead drive (/dev/sdb) but I'd prefer to know why this is happening before I do. any ideas or suggestions. I supposed I could attempt to clone/replace /dev/sdb (the partitions on drive show up, then disappear shortly after) but given the partition "chester cat" behaviour this seems risky to me and as I have a working "spare" it seems unnecessary. Thanks in advance for your insight.

  Read the article

• Fix stubborn 'Setting locale failed.'

  - by user60129

  I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

  Read the article

• The requested operation has failed! (cannot find answer)

  - by Geoff

  I know this problem is plastered all over the web but I've been searching and trying for hours with no luck. Can someone please give me some help? I originally installed Apache 2.0.64 along with PHP 5.2.17, I went through all of the steps in this tutorial with no luck, I found that the culprit was the LoadModule line. After looking on the internet I found a whole bunch of stuff but a lot of it was referring to PHP 5 and Apache 2.2. Since there seemed to be more info on apache 2.2 I removed apache 2.0.64 and installed 2.2. I added the code to LoadModule in the conf file but I got the same problem. I then followed the steps in this tutorial because it was slightly different with some things I hadn't tried yet but still I get the same problem. If I comment out LoadModule... it works fine but otherwise I get "The requested operation has failed!". This is what I ended up keeping since it works only having to comment one line. LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule mod_php5.c> AddType application/x-httpd-php .php PHPIniDir "c:/php" DirectoryIndex index.php </IfModule> EDIT: How can I stop getting this error message? UPDATE: Also, please note that I took note of the message in the PHP site that stated if PHP 5.2 was to be run with Apache to use the VC6 and not VC9. I had VC9 so I replaced it with VC6, the file is labeled php-5.2.17-nts-Win32-VC6-x86.zip

  Read the article

• Failed Software RAID0 on Linux - Attempting to recover data

  - by Gizmo_the_Great

  I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

  Read the article

• Mail server DNS failed to resolved by Mac clients

  - by Concordus Applications

  We have two internal DNS servers. One is located on a linux server box and the other is the router's DNS management. We set the linux box as primary DNS via DHCP and the router as secondary. We have a few Mac clients that are accessing our internal mail server (hostnamed "mail" internally). When using IMAP or SMTP against the mail server internally, the mac boxes will sometimes fail to locate the server. If I use NSLOOKUP I can see that "mail" is pointed to the correct IP address and is being resolved via the correct DNS server, but if I ping "mail" it fails. ~ (bash)$ nslookup mail Server: 254.254.254.206 Address: 254.254.254.206#53 Name: mail.example.com Address: 254.254.254.205 Note: I replaced our actual internal IP address with 254.254.254.* If I wait a few minutes (3-5 minutes), somehow it resolves itself and sends successfully. This happens multiple times a day. The /etc/hosts file on the mac boxes is the default config. ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost Is there something about Mac clients I should know to prevent this failed DNS resolution? Client boxes are: OSX 10.7.4, 8GB RAM, i5 MacBooks Server is: Ubuntu 12.04 Server

  Read the article

• Ubuntu 9.10 won't reboot after replacing a failed drive

  - by user149041

  Hello Serverfault community. I hope someone can shed light on a peculiar problem I am having with an Ubuntu 9.10 server install. I am not a Linux expert but have the responsibility of fixing the box if something goes wrong. DOH! I have Ubuntu 9.10 server installed on on a desktop platform: Compaq Presario SR5027CL. There are two 1TB SATA drives configured in a RAID 1 array; I use the box as an email backup server for a small group of users. Last week one of the drives failed and was replaced with a new drive of the same type. The problem I have been having is getting the box to reboot after a restart or a shutdown halt. The OS and the RAID 1 array are on the same drives that make up the RAID 1 array. The replacement drive (sda) was added to the box and the partitions were created to match the existing good drive (sdb). The array is made up of sda1 and sdb1. I found an interesting point while checking the BIOS settings: there is a "HDD Boot Group Priority" section, and the new drive was selected as the "1. 3rd master"; the server wouldn't boot configured like that, but when I set the old drive to be "1. 4th master", the box will reboot. I'm checking some more things, but I would certainly appreciate any useful information. Thanks in advance.

  Read the article

• Solution to route/proxy SNMP Traps (or Netflow, generic UDP, etc) for network monitoring?

  - by Christopher Cashell

  I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices). We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. Any suggestions for the best way to handle this? Among the things we've considered are: Using snmptrapd to accept the traps, and have it pass them off to a custom written perl handler script to rewrite the trap and send it to the proper processing box Using some sort of load balancing software running on a Linux box to handle this (having some difficulty finding many load balancing programs that will handle UDP) Using a Load Balancing Appliance (F5, etc) Using IPTables on a Linux box to route the SNMP traps with NATing We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server. For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.0.0/19 -j DNAT --to-destination 10.1.2.3 # Range: 10.0.33.0/21 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.33.0/21 -j DNAT --to-destination 10.1.2.3 # Range: 10.1.0.0/16 Site: xyz01 Destination: bar01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.1.0.0/16 -j DNAT --to-destination 10.3.2.1 This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future. Another feature that we'd really like, but isn't quite a "must have" is the ability to duplicate or mirror the UDP packets. Being able to take one incoming trap and route it to multiple destinations would be very useful. Has anyone tried any of the possible solutions above for SNMP traps (or Netflow, general UDP, etc) load balancing? Or can anyone think of any other alternatives to solve this?

  Read the article

• Building an SSL server farm

  - by dan

  I'm interested in building the the architecture in the article referenced below. I currently have a modestly-priced layer-4 load balancer and my application servers are the SSL endpoints. I want to put an SSL server farm in between my load balancer and my app servers. Then I will put another inexpensive load balancer between the SSL farm and my app servers, to do layer-7 routing. My web application has a fairly high amount of consumer traffic, that 6 servers can handle at about 50% capacity. Additionally, I have infrastructure traffic that is several orders of magnitude heavier than my consumer traffic. This is data coming in from all over the world that must integrate with my web application in real time. In total I have 18 app servers to handle all the traffic, plus 6 database servers. I will be adding 6 more app servers over the next 2 weeks and another 6 the 2 weeks after that. Conservatively, I estimate I will need to scale to 120 servers by the end of the year. My motivation right now is to separate the consumer traffic from the infrastructure traffic. The consumer traffic is higher priority than the infrastructure traffic and I cannot allow a stampede on the infrastructure side to take down my consumer-facing servers. Having a website that is always up is the top priority. However if there is a failure in one of the consumer app servers, I want to route that traffic to the servers designated for infrastructure traffic. The complication is that all the traffic is addressed using the same hostname and is nearly 100% https. The only way in my case to distinguish infrastructure from consumer traffic is by URL (poor architecture I inherited), so I need a layer 7 load balancer to be able to route. However for that to work I need either a fancy hardware-based SSL terminator or an SSL server farm as described above. Because my user base is rapidly scaling, I worry that if I go down the hardware path it will become very expensive very fast, especially since I will need 4 of everything for high availability (2 identical setups in 2 facilities). Meanwhile, the above diagram seems very flexible and more horizontally scalable. Has anyone built this before? Are there pre-built configurations? What considerations should I make and what software should I use (I've heard of people using apache with mod-ssl, nginx, and stunnel)? Also, when does it make sense to buy an expensive load balancer vs building an SSL server farm? http://1wt.eu/articles/2006_lb/index_05.html

  Read the article

• Cannot execute "LOAD DATA LOCAL INFILE" Mysql query in Rails after a connection reconnection

  - by Ngan

  On Rails 2.3.8 (but I think Rails 3 might have this issue as well, not sure): I get an error when trying to execute a LOAD DATA LOCAL INFILE query after reconnecting to a database. I have a process that parses a file that can potentially take a bit of time. During the parsing, Mysql closes the connection due to timeout. This is fine, I do a ActiveRecord::Base.verify_active_connections! and I get the connection back (I do this in several places through my app). However, running a LOAD DATA LOCAL INFILE statement, I get this error: Mysql::Error: The used command is not allowed with this MySQL version It's not a permission issue, I know that for sure. Check out my test in console: ActiveRecord::Base.connection.execute("LOAD DATA LOCAL INFILE '/tmp/test.infile' INTO TABLE users") [Sat Jan 08 00:09:29 2011] (9990) SQL (1.7ms) LOAD DATA LOCAL INFILE '/tmp/test.infile' INTO TABLE users => nil > ActiveRecord::Base.connection.disconnect! => #<Mysql:0x104c6f890> > ActiveRecord::Base.verify_active_connections! [Sat Jan 08 00:09:58 2011] (9990) SQL (0.2ms) SET SQL_AUTO_IS_NULL=0 => {...connection stuff...} > ActiveRecord::Base.connection.execute("LOAD DATA LOCAL INFILE '/tmp/test.infile' INTO TABLE users") [Sat Jan 08 00:10:00 2011] (9990) SQL (0.0ms) Mysql::Error: The used command is not allowed with this MySQL version: LOAD DATA LOCAL INFILE '/tmp/test.infile' INTO TABLE users ActiveRecord::StatementInvalid: Mysql::Error: The used command is not allowed with this MySQL version: LOAD DATA LOCAL INFILE '/tmp/test.infile' INTO TABLE users from ~/gems/activerecord-2.3.8/lib/active_record/connection_adapters/abstract_adapter.rb:221:in `log' from ~/gems/activerecord-2.3.8/lib/active_record/connection_adapters/mysql_adapter.rb:323:in `execute' from (irb):6 I am able to do other queries like SELECT and whatnot, and I will get the correct result. It's just this one that giving me the error. I even tested this with a fresh rails app. You'll notice that I am able to do the exact same query before the disconnect. Thanks for the help!

  Read the article

• jQuery .load(), don't show new content until images loaded

  - by Jarred

  Hi. I have been working on a jQuery photo slideshow. It scales the images to the browser size, and slides them left and right. There is no pre-determined size or aspect ratio, the script does everything on the fly. It requires that all images be fully loaded, so it can custom resize each individual image based on it's own aspect ratio ( width():height(), etc ), calculate the width of containing div, and calculate the slide distance from one image to another. As a stand-alone, it works pretty well (despite my lack of skills)! I simply hide the slideshow containing div at (document).ready, allow the images to load, then run the slideshow prep scripts at (window).load. Once this is done, it only then makes the slideshow divs, images, etc appear, properly sized, positioned and ready to roll. The ultimate goal is to be able to load in any number of slideshows without refreshing the page. The point of this is to be able to play uninterrupted background music. I know music on websites is annoying, but the target market likes it, a lot! I am using (target).load(page.php .element, function prepInsertNewShow() { //Prepare slideshow resizeImages(); slideArray(); //Show slideshow (target).fadeIn(); }); and it definitely works! The problem is that I cannot find a way to hold off on preparing and showing the new content until the images have finished loading. It is running the slideshow prep scripts (which are totally dependent on the images being fully loaded), before the images are loaded. This results in a completely jacked up show! What I want to do is this - (target).load(page.php .element, function prepInsertNewShow() { //Wait until images are loaded $('img').load( function() { //Prepare slideshow resizeImages(); slideArray(); //Show slideshow (target).fadeIn(); } }); But this doesn't seem to work, the new content is never shown. You can see a live version here. The initial gallery loads correctly, everything looks good. The only nav link that works is Galleries Engagement, which will load a new show (a containing div with multiple <img> tags). You will see that the images are not centered, the containing div and slide distances are much too small, as they were calculated using images that were not actually loaded. Is there any way I can delay handling and showing new content until it is fully loaded? Any suggestions would be most appreciated, thanks for your time! PS - It just occurred to me while typing this that a decent solution may be to insert "width=x" height="x" into the <img> tags, so the script can work from those values, even if the images have not loaded...hmm...

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >