Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 54/1660 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Cisco ASA and SixXS IPv6 tunnel endpoint?

  - by Martijn Heemels

  I recently installed a Cisco ASA 5505 firewall on the edge of our LAN. The setup is simple: Internet <-- ASA <-- LAN I would like provide the hosts in the LAN with IPv6 connectivity by setting up a 6in4 tunnel to SixXS. It would be nice to have the ASA as tunnel endpoint so it can firewall both IPv4 and IPv6 traffic. Unfortunately the ASA apparently can't create a tunnel itself, and can't port-forward protocol 41 traffic, so I believe I would have to do one of the following instead: Set up a host with it's own IP outside the firewall, and have that function as tunnel-endpoint. The ASA can then firewall and route the v6 subnet to the LAN. Set up a host inside the firewall that functions as endpoint, separated via vlan or whatever, and loop the traffic back into the ASA where it can be firewalled and routed. This seems contrived, but would allow me to use a VM instead of a physical machine as endpoint. Any other way? What would you suggest is the optimal way to set this up? P.S. I do have a spare public IP address available if needed, and can spin up another VM in our VMware infrastructure.

  Read the article

• Juniper EX3300 routing issue

  - by Richard Whitman

  The routing on my Juniper EX3300 does not seem to be working. My ISP's gateway is at xx.xx.xx.xx. And I have the following in the configuration: routing-options { static { route 0.0.0.0/0 { next-hop xx.xx.xx.xx; retain; } } } I can ping to my ISP's gateway from the switch. However, I can NOT ping to any other IP. When I do a traceroute (to Google.com's IP). This is what I get: traceroute to 74.125.224.69 (74.125.224.69), 30 hops max, 40 byte packets traceroute: sendto: No route to host 1 traceroute: wrote 74.125.224.69 40 chars, ret=-1 *traceroute: sendto: No route to host Do I need to enable any protocols? I guess this goes without saying, but I am kind of new to Junos. Update: This is the output from show interfaces terse | match inet: bme0.32768 up up inet 128.0.0.1/2 jsrv.1 up up inet 128.0.0.127/2 vlan.0 up up inet 10.0.1.1/24 vlan.1 up up inet xx.xx.xx.110/30 and this is the output from: show route forwarding-table: Routing table: default.inet Internet: Destination Type RtRef Next hop Type Index NhRef Netif default perm 0 rjct 36 1 0.0.0.0/32 perm 0 dscd 34 1 10.0.1.0/24 intf 0 rslv 1321 1 vlan.0 10.0.1.0/32 dest 0 10.0.1.0 recv 1319 1 vlan.0 10.0.1.1/32 intf 0 10.0.1.1 locl 1320 2 10.0.1.1/32 dest 0 10.0.1.1 locl 1320 2 10.0.1.3/32 dest 1 0:25:90:63:26:53 ucst 1331 2 vlan.0 10.0.1.255/32 dest 0 10.0.1.255 bcst 1318 1 vlan.0

  Read the article

• Remote Desktop fails without error message

  - by Adrian Grigore

  Hi, After rebooting my server Windows 2008 R2 server, I can't log into the remote desktop anymore. When I try to connect, the remote desktop zooms through different status messages, the last of them being "Configuring remote session" and then reverts to the initial Connection dialog again without giving me any error message. The server is seems to be up, since it's still deliverying web pages. Also, it does seem to be accepting my credentials. Is there any way to see why the connection fails? I've browsed through my system's even logs, but could not find anything related to remote desktop. Perhaps there's some hidden troubleshooting mode? Thanks, Adrian Edit: In the meantime the server has come back online. I'm not sure if it did so on it's own or if tech support did because I have not heard from them so far, but the problem is solved for the moment. It's a bit disappointing not to know the cause of thep problem though.

  Read the article

• IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in.

  - by RSolberg

  I just launched my first IIS FTP site following many of the tutorials from IIS.NET... I'm using IIS Users and Permissions rather than anonymous and/or basic. This is what I'm seeing while trying to establish the connection... Status: Resolving address of ftp.mydomain.com Status: Connecting to ###.###.##.###:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFTPUser Response: 331 Password required for MyFTPUser. Command: PASS ******************** Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server

  Read the article

• My SMTP's outgoing mail gets bounced

  - by BloodPhilia

  I've got a ISPconfig 3 production server set up, running Ubuntu Server 9.04. My e-mail gets delivered ok to almost every other server I send mail to except for one (smtp.chello.nl which bounces my email). In my /var/log/mail.err I found the below error. Sep 23 08:59:33 <MYHOSTNAME> postfix/smtp[26944]: 3DB2B1456149: to=<<RECIPIENT>@chello.nl>, relay=smtp.chello.nl[213.46.255.2]:25, delay=2, delays=0.02/0.01/1.9/0.04, dsn=5.1.0, status=bounced (host smtp.chello.nl[213.46.255.2] said: 550 5.1.0 Dynamic/Generic hostnames are blocked. Please contact your Email Provider. Your IP was <MY IP>. Your hostname was ??. (in reply to MAIL FROM command)) What could be the cause of this? I did an SMTP check on mxtools.com and got the following: OK - Not an open relay OK - 0 seconds - Good on Connection time OK - 1.482 seconds - Good on Transaction time OK - 83.161.xx.xx resolves to a83-161-xx-xx.xxx.xxx.nl WARNING - Reverse DNS does not match SMTP Banner Update: My IP is static.

  Read the article

• Resolving “ssl handshake failure” error in PostgresQL

  - by Mitch

  I would like to connect to my Postgres 8.3 database using SSL from my XP client using OpenSSL. This works fine without SSL. When I try it with SSL (no client certificate), I get the error: error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure I have followed the instructions in the Postgres manual for SSL including creating a self-signed certificate. In my pg_hba.conf there is a line: host dbname loginname 123.45.67.89/32 md5 The version of OpenSSL on the server is 0.9.8g and on the client is 0.9.8j. I'd appreciate any suggestions for tracking down the problem. Edit: The uncommented lines from postgresql.conf are: data_directory = '/var/ebs0/postgres/main' hba_file = '/etc/postgresql/8.3/main/pg_hba.conf' ident_file = '/etc/postgresql/8.3/main/pg_ident.conf' external_pid_file = '/var/run/postgresql/8.3-main.pid' listen_addresses = '*' port = 5432 max_connections = 100 unix_socket_directory = '/var/run/postgresql' ssl = true shared_buffers = 24MB

  Read the article

• iPhone - Open excel from SSRS 2008

  - by milesmcgehee

  We're currently having a problem with our 2008 SSRS server sending excel reports to users with iPhones. They get the email with no problems, but when the XLS file is opened on the phone, it returns an error of: Invalid format. Everyone else can open the report with no problems (email/blackberry) The odd thing, is I can drag the file to my desktop from the message, open it, save it, and then email it again and it opens just fine on the phone. Does anyone know of hotfix that can be applied to the SSRS server to create the XLS files correctly? Or something I can change to make this work? I know we can send all the attachments in PDF but I'd like to keep them XLS if at all possible.

  Read the article

• System Account Logon Failures ever 30 seconds

  - by floyd

  We have two Windows 2008 R2 SP1 servers running in a SQL failover cluster. On one of them we are getting the following events in the security log every 30 seconds. The parts that are blank are actually blank. Has anyone seen similar issues, or assist in tracking down the cause of these events? No other event logs show anything relevant that I can tell. Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/17/2012 10:02:04 PM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: SERVERNAME.domainname.local Description: An account failed to log on. Subject: Security ID: SYSTEM Account Name: SERVERNAME$ Account Domain: DOMAINNAME Logon ID: 0x3e7 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Account Domain: Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x238 Caller Process Name: C:\Windows\System32\lsass.exe Network Information: Workstation Name: SERVERNAME Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Schannel Authentication Package: Kerberos Transited Services: - Package Name (NTLM only): - Key Length: 0 Second event which follows every one of the above events Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/17/2012 10:02:04 PM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: SERVERNAME.domainname.local Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Account Domain: Failure Information: Failure Reason: An Error occured during Logon. Status: 0xc000006d Sub Status: 0x80090325 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Schannel Authentication Package: Microsoft Unified Security Protocol Provider Transited Services: - Package Name (NTLM only): - Key Length: 0 EDIT UPDATE: I have a bit more information to add. I installed Network Monitor on this machine and did a filter for Kerberos traffic and found the following which corresponds to the timestamps in the security audit log. A Kerberos AS_Request Cname: CN=SQLInstanceName Realm:domain.local Sname krbtgt/domain.local Reply from DC: KRB_ERROR: KDC_ERR_C_PRINCIPAL_UNKOWN I then checked the security audit logs of the DC which responded and found the following: A Kerberos authentication ticket (TGT) was requested. Account Information: Account Name: X509N:<S>CN=SQLInstanceName Supplied Realm Name: domain.local User ID: NULL SID Service Information: Service Name: krbtgt/domain.local Service ID: NULL SID Network Information: Client Address: ::ffff:10.240.42.101 Client Port: 58207 Additional Information: Ticket Options: 0x40810010 Result Code: 0x6 Ticket Encryption Type: 0xffffffff Pre-Authentication Type: - Certificate Information: Certificate Issuer Name: Certificate Serial Number: Certificate Thumbprint: So appears to be related to a certificate installed on the SQL machine, still dont have any clue why or whats wrong with said certificate. It's not expired etc.

  Read the article

• GhettoVCB.sh log is wrong

  - by Michael

  2010-02-25 16:03:02 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2 2010-02-25 16:03:02 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2010-02-25 16:03:02 -- info: ============================== ghettoVCB LOG START ============================== 2010-02-25 16:03:02 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-02-25 16:03:02 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-02-25 16:03:02 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-02-25 16:03:02 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nfs_storage_backup/vm1 2010-02-25 16:03:02 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-02-25 16:03:02 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2 2010-02-25 16:03:02 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-02-25 16:03:02 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2010-02-25 16:03:02 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-02-25 16:03:02 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-02-25 16:03:02 -- info: CONFIG - LOG_LEVEL = info 2010-02-25 16:03:02 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log 2010-02-25 16:03:02 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-02-25 16:03:02 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-02-25 16:03:02 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-02-25 16:03:02 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-02-25 16:03:02 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2010-02-25 16:03:02 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-02-25 16:03:02 -- info: CONFIG - LOG_LEVEL = info 2010-02-25 16:03:02 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-02-25 16:03:02 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2010-02-25 16:03:13 -- info: Initiate backup for VM1 2010-02-25 16:03:13 -- info: Initiate backup for VM1 2010-02-25 16:03:13 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-02-25" for VM1 2010-02-25 16:03:13 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-02-25" for VM1 Failed to clone disk : The file already exists (39). Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/datastore1/machine/VM1.vmdk'... 2010-02-25 16:04:16 -- info: Removing snapshot from VM1 ... Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/datastore1/machine/VM1.vmdk'... How can I fix this issue, the backup is working, but the log shows something like 2 back-up's in the exact time?

  Read the article

• AWS RDS (SQL Server): SSL Connection - The target principal name is incorrect

  - by AX1

  I have a Amazon Web Services (AWS) Relational Database Service (RDS) instance running SQL Server 2012 Express. I've installed Amazon's aws.amazon.com/rds certificate in the client machine's Trusted Root Certification Authorities store. However, when I connect to the RDS instance (using SQL Server Management Studio 2012) and check off "Encrypt Connection", I get the following error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.) (Microsoft SQL Server) What does this mean, and how can I fix it? Thanks!

  Read the article

• IPtables AWS EC2 NAT/Reverse NAT - For Reverse Proxy style setup but with IPtables

  - by Mark

  I was thinking initially needing to do a reverse proxy or something so I could get some SSL/TLS traffic look like it is being terminated at a server and IP address in the AWS cloud, and then that traffic is forwarded onto our actual web servers that aren't in the cloud... I've not done much iptables pre and post routing before Dnat or Snat which I know are the things I need or a combination of the things I need in order achieve what i'm trying. Things to note:- Client/User - Must not be able to see backend IP address and only see the IP address of the cloud box https (TLS/SSL) - connection shouldn't be terminated at the cloud box, it should act like a router almost EC2 instance - Has only one network interface available to play with... this is thus an (internet <- internet) type of routing going on. EC2 instance IP address is already more or less behind a NAT that I have no control over, for example... Public ip address could be 46.1.1.1 but instance IP will be 10.1.1.1. Connections from client will go to 46.1.1.1 which will end up at the instance and on interface 10.1.1.1. The connection from the client then needs to be forwarded (DNAT) onto the backend web servers which are back out on the internet (SNAT). Possibly a part of the problem could be that the SNAT will need to be set to the external interface of the instance and I wonder if this makes it harder for IPtables to track the connection? So looking to basically, have it look as though connections are terminating at this server and its IP address. Whereas all that's really happening is the https request and connection is being forwarded straight onto another internet facing web server. How possible does that sound?

  Read the article

• WDS "No response" only when notify and wait for approval

  - by Cylindric

  I have a WDS server setup for use with MDT2010, and everything was working fine until this morning. Now, whenever I try to boot from LAN, I get an error: Downloaded WDSNBP... Architecture: x64 WDSNBP started using DHCP Referral. Contacting Server: 10.50.10.12 (Gateway: 0.0.0.0) No response from Windows Deployment Services server. Launching pxeboot.com My PXE Response Policy setting on the WDS is set to this: [ ] Do not respond to any client computer [ ] Respond only to known client computers [o] Respond to all (known and unknown) client computers [X] For unknown clients, notify administrator and respond after approval The odd thing is that if I clear the approval option (so any computer gets a response) it works fine. I have delegated permissions on the AD OU to the computer object WDS is running on, but that doesn't seem to have helped. As it works without approval, I can only assume my DHCP options are fine and this is some sort of AD permission problem. (Server is Windows Server 2008 SP2)

  Read the article

• Installing gitweb failed: No package gitweb available

  - by logii

  I have tried installing gitweb via ssh and failed. Below is what I get. root@server [~]# yum install gitweb Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * rpmforge: ftp-stud.fht-esslingen.de rpmforge | 1.1 kB 00:00 rpmforge/primary | 3.8 MB 00:19 rpmforge 10502/10502 Excluding Packages in global exclude list Finished Setting up Install Process No package gitweb available. Nothing to do Anyone has any idea of what else is missing?

  Read the article

• DB2 upgrade database Fails due to descriptor corruption

  - by Jdcc

  Hi Everyone, I've recently upgraded my DB2 9.5 to DB2 9.7, and I am unable to update my database to v9.7. The error I have been receiving is this: "SQL0901N The SQL statement failed because of a non-severe system error. Subsequent SQL statements can be processed. (Reason "Packed descriptor corruption found. Please run RUNSTATS on this table".) SQLSTATE=58004" I have tried to connect with 9.5 clients that worked before the "upgrade" on other machines, but they complain about the DB not being migrated to the current version. So my DB is now somewhere in limbo between 9.5 and 9.7. Would anyone have any clever ideas on how to execute runstats on this DB without being able to connect to it? I'm not concerned so much about the data inside, as I am about the settings (name,optimization stuff, etc) Please let me know if I there is any information I left out. Thanks, Jdcc

  Read the article

• FTP Error: 550 Cant change directory to /: Permission denied

  - by Alessandro Merletti de Palo

  I installed Pureftpd and Ispconfig3 on my server. Starting from the point I'll probably uninstall ispconfig3 and make things directly on the server, now I am so stubborn I really want to see where's the problem. I created a ftp user through ispconfig, named amdpftp. It is related to a server user named web7. It logs in with username and password, but if i try to ls, it tells me: FTP Error: 550 Cant change directory to /: Permission denied I thought many things, like: 1. It is a problem of permissions. I went to /var/www/clients/client0/web7 , it was immutable and owned by root. Chattr -i and chown web7:client0 changed permissions, but with no effect. I restored to root:root, and made it immutable again. 2. I make some mistakes in the pureftpd installation: Wrong, it works pretty fine. The pureftpd.log doesn't seem to say anything bad. 3. The pureftpd.log file is only the pureftpd one, I should also check the mysqld functionality, as it is in a mysql database that user, password and working directory are stored. I enabled logging in the my.cnf, but also in the ispconfig database operation there wasn't anything wrong. Then I mkdir testftp in /var/www, chown web7:client0, and edited amdpftp user root directory from /var/www/clients/client0/web7 into /var/www/testftp . Guess what? It worked. So, now I know: 1. The PureFtpd works pretty fine 2. The mysql ispconfig database as well 3. The username and password of the virtual user created by ispconfig into pureftpd work 4. The correlation between username and password and the user web7 and the group client0 does work. What kind of magic has been cast upon the ispconfig directories [/var/www/clients/*] that block ftpusers to operate?

  Read the article

• AppCmd returns error: Object 'SET' is not supported

  - by RHPT

  I am trying to set SSL Host Headers and Secure Site Bindings in IIS7. I followed the directions on this website http://www.digicert.com/ssl-support/ssl-host-headers-iis-7.htm (among others), but when I run the appcmd command mentioned, I get the error "Object 'SET' is not supported. Run 'appcmd.exe /?' to display supported objects". I have also tryed "appcmd site set" but it still returns the same error. What am I doing wrong? The server I am working on is Windows 2008 R2 x64, if that matters. Thank you.

  Read the article

• Nginx ssl - SSL: error:0906D06C:PEM routines:PEM_read_bio:no start line

  - by Alex

  I am trying to enable ssl on a server using a certificate from 123-reg but I keep getting this error: nginx: [emerg] SSL_CTX_use_certificate_chain_file("/opt/nginx/conf/cleantechlms.crt") failed (SSL: error:0906D06C:PEM routines:PEM_read_bio:no start line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) This is my nginx config: server { listen 443; server_name a-fake-url.com; root /file/path/public; passenger_enabled on; ssl on; ssl_certificate /opt/nginx/conf/cleantechlms.crt; ssl_certificate_key /opt/nginx/conf/cleantechlms.key; } I have tried setting my crt and key to full file permissions but there is no difference. My crt file is the crt I was issued concatenated with the ca crt. Update I have tried copying both the keys in sperate files and then running 'cat mykey.crt ca.cert' Also I tried manually copying the keys into the same file. Any ideas?

  Read the article

• Apache load balancer limits with Tomcat over AJP

  - by PAS

  Hi All, I have Apache acting as a load balancer in front of 3 Tomcat servers. Occasionally, Apache returns 503 responses, which I would like to remove completely. All 4 servers are not under significant load in terms of CPU, memory, or disk, so I am a little unsure what is reaching it's limits or why. 503s are returned when all workers are in error state - whatever that means. Here are the details: Apache config: <IfModule mpm_prefork_module> StartServers 30 MinSpareServers 30 MaxSpareServers 60 MaxClients 200 MaxRequestsPerChild 1000 </IfModule> ... <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> # Tomcat HA cluster <Proxy balancer://mycluster> BalancerMember ajp://10.176.201.9:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.201.10:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.219.168:8009 keepalive=On retry=1 timeout=1 ping=1 </Proxy> # Passes thru track. or api. ProxyPreserveHost On ProxyStatus On # Original tracker ProxyPass /m balancer://mycluster/m ProxyPassReverse /m balancer://mycluster/m Tomcat config: <Server port="8005" shutdown="SHUTDOWN"> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <Service name="Catalina"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost"> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Engine> </Service> </Server> Apache error log: [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.10:8009 (10.176.201.10) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.10) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.10 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.9:8009 (10.176.201.9) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.9) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.9 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.219.168:8009 (10.176.219.168) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.219.168) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.219.168 [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state Load balancer top info: top - 23:44:11 up 210 days, 4:32, 1 user, load average: 0.10, 0.11, 0.09 Tasks: 135 total, 2 running, 133 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 99.2%id, 0.1%wa, 0.0%hi, 0.1%si, 0.3%st Mem: 524508k total, 517132k used, 7376k free, 9124k buffers Swap: 1048568k total, 352k used, 1048216k free, 334720k cached Tomcat top info: top - 23:47:12 up 210 days, 3:07, 1 user, load average: 0.02, 0.04, 0.00 Tasks: 63 total, 1 running, 62 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 99.8%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097372k total, 2080888k used, 16484k free, 21464k buffers Swap: 4194296k total, 380k used, 4193916k free, 1520912k cached Catalina.out does not have any error messages in it. According to Apache's server status, it seems to be maxing out at 143 requests/sec. I believe the servers can handle substantially more load than they are, so any hints about low default limits or other reasons why this setup would be maxing out would be greatly appreciated.

  Read the article

• MySQL Daemon failed to start.

  - by matthewsteiner

  There were no updates when I ran yum update. I was trying to install php-soap (which was failing), and online I found I should run this: wget -q -O - http://www.atomicorp.com/installers/atomic.sh |sh After running that, then "yum install php-soap" ran successfuly. Then I ran yum update just to check for updates and said yes for some packages. I noticed there were some mysql ones and such. Now mysql isn't running anymore and it won't let me start it (I get "MySQL Daemon failed to start") Ideas?

  Read the article

• SCCM 2007 R2 missing boot.wim files from OSD\Boot folder

  - by JohnyV

  I have just installed SCCM 2007 R2 and when I went to deploy an OS i found that there is a problem with the boot.wim...There isnt one in the osd\ folder on the SCCM server. I then tried to use other WIM files and they all failed with "Error: Errors You can not import this boot image. Only finalized boot images are supported" I even tried to recreate the wim with DISM and it still would not accept it. Any ideas.

  Read the article

• lucene vs sphinx vs xapian vs lemur , which is a good choice for production use?

  - by Mickey Shine

  I am evaluating the full-text searching systems and I really need your practical experiences. Also you can suggest some that I didn't mention.

  Read the article

• SMTP 552 4.3.1 Session size exceeds fixed maximum session size.

  - by JL

  I'm having a frustrating problem with one of our clients who is running an exchange SMTP server. I have an emailing component that is written in .net and I've specifically used Mono DLL's to ensure that the email component sends the ELO and QUIT command for each message it sends. Each mail I send will never exceed 10MB's including attachments, which is lower than the session size value set in the clients exchange configuration. Still the problem persists. Any ideas where to look?

  Read the article

• hp ProLiant DL380 G6 server error code: 347 of array controller

  - by alhaythum

  I have got a bran new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 164 GB SATA drives and wanted to change them with 300 GB SATA drives before installation. Now, we replace the drives and begin the configuration with the hp DVD and begin; when we reach the point that we want to save the configurations, an error message appears: "The operation has failed with an unknown error, please restart the application and attempt the operation again" When using Rescan System, this error message appears: "Status Alerts - Smart Array P410i in Embedded Slot Warning Status Message Code Description 347 The cache for Smart Array P410i Embedded Slot is not configured" We return back to the 164 GB SATA drives and the message just keeps appearing again. Any help please.

  Read the article

• Windows 2008 R2 DHCP server not responding to DHCP discover

  - by MartinSteel

  I've got two Windows 2008 Enterprise R2 servers both running DNS and DHCP called cod & lobster. DHCP is setup using the split scope option introduced with 2008 R2, whereby both servers should respond with the first response providing the lease. Setup is as follows: Cod - IP: 192.168.0.231 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 160-179. - Response Delay: 0ms - Authorised in Active Directory (Re-authorised to confirm) - Windows firewall disabled while testing Lobster - IP: 192.168.0.232 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 101-159. - Response Delay: 1000ms - Authorised in Active Directory All DHCP leases to clients are currently being issues by Lobster rather than Cod. Packet captures with Wireshark show the following (all to broadcast address): Client - DHCP Discover Lobster - DHCP Offer (after 1s delay) Client - DHCP Request Lobster - DHCP Ack Client - DHCP Inform From my setup with two servers I'd expect to see a DHCP Offer coming from Cod almost immediately after the DHCP Discover. Does anybody have any idea what would prevent the DHCP Server responding to the discover?

  Read the article

• mount: cannot remount block device /dev/sda5 read-write, is write-protected

  - by marc.riera

  So, this is it. Everything is working as usual except the disk is read only and dont want to change back. ^_^! thanks. root@NODE02:/tmp# df . Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda5 461490504 179502128 258545928 41% / root@NODE02:/tmp# mount -o rw,remount /dev/sda5 mount: cannot remount block device /dev/sda5 read-write, is write-protected root@NODE02:/tmp# touch helll touch: cannot touch `helll': Read-only file system It's not multipath. It's nothing special. Just a server with ubuntu 9.10. makes no sense for me, does it?

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >