Search Results

Search found 9608 results on 385 pages for 'flash drives'.

Page 54/385 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Raid Shows Up as Multiple Drives - Can't Mount

    - by manyxcxi
    I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

    Read the article

  • mount ext4 formated external drive->the drives green light won't stop flashing

    - by Gohlool
    I've installed kubuntu (after 10 years I am trying to play with linux) and manged to attach a external 1TB HDD drive over USB! The drive was formatted with NTFS and everything was working OK. I also changed the /etc/fstab here is my ntfs mount setting: /dev/sdb1 /media/samsung nts-3g auto,user,uid=1000,gid=1000,fmask=000,utf-8 0, 0 Now, I've reparationed the drive and formated it with ext4 filesystem! change my fstb like: /dev/sdb1 /media/samsung ext4 defaults,noatime 0, 0 now, when I plug my dive/or call sudo mount -a, my external drive's green light starts to flash and won't stop, but mount works .... What is the Problem? is this because of ext4? because with NTFS this won't happen! btw. after changing the owner of the /media/samsung and setting permissions 777, I can also access my drive like creating new folder atc. (although is's flashing constantly)! What is my mistake? btw. can you please let me know how to set the owner and the permissions for my /media/samsung directory in fstab for ext4 like I did it for NTFS? Thanks in advance

    Read the article

  • How to Create Shortcuts to Programs on USB Drives

    - by Lori Kaufman
    If you work on multiple computers, you probably use a USB drive to take your favorite portable software with you. Portable application suites like PortableApps.com, CodySafe, or Lupo PenSuite, each have a main menu providing access to the programs installed into the suite. However, there may be reasons why you need to create shortcuts to programs on your USB drive. You may be using a program that does not integrate into the suite’s main menu. Or, you may not be using an official portable application suite at all, and just placing portable software in a folder on your USB drive. Maybe you prefer using shortcuts on the root of the USB drive, like a portable desktop. Whatever your reason, you can’t just create a shortcut to an application on the USB drive and place it in the root of the drive. The shortcut will always refer to the full path of the application, including the drive letter. Different computers assign different drive letters to USB flash drives, so you would have to change the drive letter for your shortcuts when it changes. You can assign a static drive letter to the USB drive. However, if you would rather not do that, there is a way to create shortcuts to programs on a USB drive using relative paths. Because Windows does not support relative paths in shortcuts, we will show you how to create a “shortcut” on the root of a USB drive by creating a batch (.bat) file and converting it to an executable (.exe) file. What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

    Read the article

  • How to join a Windows Domain an Map NEtwork Drives on Ubuntu Partition

    - by AgainstClint
    I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

    Read the article

  • HTML 5 <video> tag vs Flash video. What are the pros and cons?

    - by Vilx-
    Seems like the new <video> tag is all the hype these days, especially since Firefox now supports it. News of this are popping up in blogs all over the place, and everyone seems to be excited. But what about? As much as I searched I could not find anything that would make it better than the good old Flash video. In fact, I see only problems with it: It will still be some time before all the browsers start supporting it, and much more time before most people upgrade; Flash is available already and everyone has it; You can couple Flash with whatever fancy UI you want for controlling the playback. I gather that the tag will be controllable as well (via JavaScript probably), but will it be able to go fullscreen? The only two pros for a <video> tag that I can see are: It is more "semantic" - which probably holds no importance to a whole lot of people, including me; It is not dependent on a single commercial 3rd party entity (Adobe) - which I also don't see as a compelling reason to switch, because free players and video converters are already available, and Adobe is not hindering the whole process in any way (it's not in their interests even). So... what's the big deal? Added: OK, so there is one more Pro... maybe. Support for mobile devices. Hard to say though. A number of thoughts race through my head about the subject: How many mobile devices are actually able to decode video at a decent speed anyway, Flash or otherwise? How long until mainstream mobile devices get the <video> support? Even if it is available through updates, how many people actually do that? How many people watch videos on web pages on their mobile phones at all? As for the semantics part - I understand that search engines might be able to detect videos better now, but... what will they do with them anyway? OK, so they know that there is a video in the page. And? They can't index a video! I'd like some more arguments here. Added: Just thought of another Cons. This opens up a whole new area of cross-browser incompatibility. HTML and CSS is quite messy already in this aspect. Flash at least is the same everywhere. But it's enough for at least one major browser vendor to decide against the <video> tag (can anyone say "Internet Explorer"?) and we have a nice new area of hell to explore. Added: A Pro just came in. More competition = more innovation. That's true. Giving Adobe more competition will probably force them to improve Flash in areas it has been lacking so far. Linux seems to be a weak spot for it, cited by many.

    Read the article

  • Ask How-To Geek: Clone a Disk, Resize Static Windows, and Create System Function Shortcuts

    - by Jason Fitzpatrick
    This week we take a look at how to clone a hard disk for easy backup or duplication, resize stubbornly static windows, and create shortcuts for dozens of Windows functions. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics

    Read the article

  • Adobe dévoile une tablette sous Android supportant Flash, un pied de nez technologique à Steve Jobs

    Adobe dévoile une tablette sous Android supportant Flash, un pied de nez technologique à Steve Jobs Il semblerait qu'au final, Adobe se fiche pas mal que l'iPad refuse Flash. La compagnie vient en effet de présenter une tablette tournant sous Android (l'OS de Google), et prenant Flash et Air en charge de manière on ne peut plus fluide. L'objet permet de lire des vidéos YouTube en natif dans le navigateur intégré. Sur les vidéos de l'objet (voir plus bas), on le voit aussi afficher une version bêta de l'application du magazine Wired, qui a été conçue avec Air d'Adobe. D'après une source anonyme, il devrait y avoir plusieurs tablettes Android sur le marché d'ici à la fin de l'année. En to...

    Read the article

  • Stats on Screen Size for Flash Games

    - by ashes999
    I'm working on a Flash game after many, many years. I'm trying to figure out size to make my application run (eg. 600x800). Because it's a tall (not wide) game, I'm confused. I know about (and love) the Steam hardware stats. However, for Flash gaming, I have two nit-picks with their survey sample: 1) Caters to more hardcore gamers with better hardware (overall) 2) Captures only a subset of Flash gamers. Doesn't capture people who play at school, work, etc. or not netbooks and lighter machines. Are there any sort of statistics I can use to determine which size to use? Ideally, I would like to know something like: 800x600 will fit 94% of users screens 1024x768 will fit 74% of users screens 1200x960 will fit 53% of users screens etc.

    Read the article

  • Can't boot without Flash Drive plugged in

    - by vlad
    (Sorry for my bad English) I had Ubuntu 12.04 Beta installed on my computer. When 12.04 was finally released, I made a bootable USB Flash Drive using Startup Disk Creator. Then I decided to check if this drive works properly and to reinstall the system on my desktop. I must add, my desktop behaves a bit strange when it comes to bootable USB's, it recognizes them as HDD. In BIOS I changed priority of boot so USB Flash Drive (recognized as HDD) was first. Successfully booted, I installed Ubuntu. Everything worked fine, but... Now I cannot boot from my real HDD. Every time I want to boot, I put the USB Flash Drive into my computer, boot, safely remove it and everything works. What have I to do, to repair boot? Thank you for your time!

    Read the article

  • Workflow with Flash Pro CS6 and FlashDevelop: Using fla and swc to store assets

    - by Arthur Wulf White
    I am using this tutorial: http://www.flashdevelop.org/wikidocs/index.php?title=AS3:FlexAndFlashCS3Workflow In the past older versions of Flash Pro I was able to complete these steps: right-click on the symbol in the Library panel, select "Linkage..." dialog, check "Export for ActionScript" and fill in the symbol name (ie. MySymbol_design or assets.MySymbol_design), do not change the base class (ie. flash.display.MovieClip). Right now, I am stuck at that part. Any hints? What I wish to do is: Use fla for the artist to store assets. Publish to swc Extract the assets in FlashDevelop by creating an instance of their class. ... How is this done in CS6? To clear things up, this is what I see when I right click a Flash symbol:

    Read the article

  • Flash Player et Acrobat Reader : vulnérabilité critique zero-day confirmée par Adobe, elle serait déjà exploitée

    Flash Player et Acrobat Reader : vulnérabilité critique zero-day confirmée Des pirates l'auraient déjà exploitée Adobe tire la sonnette d'alarme. Une faille critique non corrigée dans son lecteur Flash Player serait déjà exploitée par des pirates. Selon un avis de sécurité qui vient d'être publié par l'éditeur, la vulnérabilité pourrait être exploitée par des pirates distants pour provoquer un crash de l'application ou, plus préoccupant, pour prendre le contrôle du système affecté en intégrant des fichiers Flash infectés dans un document Microsoft Excel envoyé en pièce jointe. La vulnérabilité aurait déjà été utilisée pour des attaques ciblées. La vulnérabilité touche égale...

    Read the article

  • How To Use Flash on Any Website in Modern Internet Explorer 10

    - by Chris Hoffman
    The modern (or “Metro”) version of Internet Explorer in Windows 8 supports Flash, but only for some Microsoft-approved websites. You can add your own favorite websites to Microsoft’s whitelist to view Flash on any website. The desktop version of IE supports Flash on every website, but you don’t have to leave the new Windows 8 user interface if you don’t want to. This trick works on both Windows 8 and Windows RT. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • Instruct Ubuntu to boot TORAM from flash drive using unetbootin

    - by Goyuix
    I have used UNetbootin to create an installable / live bootable flash drive from Ubuntu 12.04. However that didn't preserve the normal Ubuntu boot menu which allows to me to enter advanced options. It has a custom menu that I can pick from predefined choices like "Install Ubuntu" and "Try Ubuntu without installing". What I would like is to be able to boot from the USB flash drive, but then be able to remove it from the computer once the desktop has loaded. The laptop I would like to use this on does not have a CD/DVD drive. What do I need to modify on the flash drive to add an option to "Try Ubuntu (RAM)" that passes the TORAM=yes parameter to the initrd options? Are their other things I need to touch/change as well? Bonus: I would guess the answer would also allow for other options like acpi=off as well, but if it is different I would appreciate having that answer too.

    Read the article

  • Flash 10.1 est là : accélération matérielle et 32 failles colmatées au programme

    Mise à jour du 11/06/10 Flash 10.1 : accélération matérielle et 32 failles colmatées Flash 10.1 est là. Cette nouvelle version de Flash s'accompagne de l'arrivée de l'accélération matérielle et de la correction de 32 failles de sécurité. La première innovation devrait faire taire, du moins en partie, les critiques sur les performances de la technologie d'Adobe. L'accélération matérielle permet de lire les vidéos (H.264) en utilisant les ressources de la carte graphique (GPU) et non plus du CPU. Résultat, une lecture plus rapide et fluide, et un processeur moins impacté par l'utilisation du player. Tout ceci se passe sur le papier. E...

    Read the article

  • flash cs4 file reference. Event.COMPLETE not called on a MAC,

    - by jobbie jones
    Hi, I am working with a fileReference, however I'm having issues running on Safari on a MAC... EDIT The below example also doesnt work on Safari on a MAC... http://www.permadi.com/blog/2010/06/flash-as3-using-filereference-to-load-files-example-for-flash-cs4-and-above/ # The workflow on a PC runs as such: 1) Create file reference 2) attach addEventListener's for Event.SELECT and Event.COMPLETE 3) call the browse() method On a PC, Event.SELECT is fired when a file has been selected. Event.COMPLETE is fired when the file data is available to flash. If I select an 500meg file, it takes a few seconds before Event.COMPLETE is fired. If I attempt to access the file data properties (such as reading the data stream) before Event.COMPLETE is fired, I receive null reference errors... So far so good. However, on a MAC (speficially Safari, not tested other browsers), the Event.COMPLETE is not fired. I have checked the Adobe docs, which say Event.COMPLETE is fired when the upload is completed. So why does it get fired on windows when the fileReference has parsed the file, but the upload method has not yet been called... Can anyone help? Here's snippets of the code I am working on: public function browseFile(target:Object):void { var imagesFilter:FileFilter = new FileFilter("Allowed files", "*.jpg;*.bmp;*.flv;"); fileReference.browse([imagesFilter]); fileReference.addEventListener(Event.SELECT, fileSelect); fileReference.addEventListener(Event.COMPLETE, fileSelectComplete); } private function fileSelect(event:Event):void { // update label - IMPORTANT for large files as there's a delay while flash parses file, before control is handed back to this script... setStatusLabel("...loading file"); var fileReference:FileReference = event.target as FileReference; fileReference.addEventListener(Event.COMPLETE, fileSelectComplete); // load the file into the fileReference object fileReference.load(); } // Called when upload file has been processed by flash (a few secs for large files, or fileRef.data is null...) private function fileSelectComplete(event:Event):void { var fileReference:FileReference=event.target as FileReference; trace("ready to do things - but not fired on Safari on a MAC "); }

    Read the article

  • How to detect for screenreaders/MSAA without focusing the flash movie?

    - by utt73
    I am trying to detect for the presence of assistive technology using flash. When a Flash movie holding the actionscript below on frame 1 is loaded (and screenreader chatting to IE or Firefox over MSAA is active -- JAWS or NVDA), Accessibility.isActive() does not return "true" until the movie is focused. Well, actually not until some "event" happens. The movie will just sit there until I right-click it & show flash player's context menu... it seems only then Accessibility.isActive() returns true. Right-clicking is the only way I could get the movie to "wake up". How do I get the movie to react on it's own and detect MSAA? I've tried sending focus to it with Javascript... can a fake a right-click in javascript or actionscript? Or do you know the events a right click is firing in a flash movie -- possibly I can programatically make that event happen? My Actionscript: var x = 0; //check if Microsoft Active Accessibility (MSAA) is active. //Setting takes 1-2 seconds to detect -- hence the setTimeout loop. function check508(){ if ( Accessibility.isActive() ) { //remove this later... just visual for testing logo.glogo.logotext.nextFrame(); //tell the page's javascript this is a 508 user getURL("javascript:setAccessible();") } else if (x<100) { trace ("There is currently no active accessibility aid. Attempt " + x); x++; setTimeout(check508,200); } } /* //FYI: only checks if browser can talk to MSAA, not that it is actually running. Sigh. if (System.capabilities.hasAccessibility) { logo.glogo.logotext.nextFrame(); getURL("javascript:setAccessible();") }; */ check508(); stop(); My HTML: <embed id="detector" width="220" height="100" quality="high" wmode="window" type="application/x-shockwave-flash" src="/images/detect.swf" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="">

    Read the article

  • Gparted Partition Mount Points Alternate Between 2 Physical Disk Drives

    - by California Ken
    I'm running Ubuntu Server 14.04 on a system with 2 physical disk drives. I am frequently seeing mount errors on startup. When I check the drive partitions using GPARTED, I see that my two "non-system created" data partitions have the wrong disk assignments (i.e. sda1 vs sdb1) or visa-versa. If I hand edit /etc/fstab to match GPARTED, the system will boot error free one time. On the second restart I will get the "serious mount problem" error for the 2 data partitions and when I check GPARTED, the disk assignments have changed again (again, GPARTED and fstab don't match). A listing of my /etc/fstab is: /etc/fstab: static file system information. # Use 'blkid' to print the universally unique identifier for a device; this may be used with UUID= as a more robust way to name devices that works even if disks are added and removed. See fstab(5). # / was on /dev/sdb2 during installation UUID=766a06a4-e5af-484a-adf0-fa1e88da7212 / ext4 errors=remount-ro,user_xattr,acl,barrier=1 0 1 swap was on /dev/sda6 during installation UUID=8c42f835-ead3-43fb-88d8-196f5dfc3aa7 none swap sw 0 0 swap was on /dev/sdb3 during installation UUID=2214deec-ba98-47da-aea7-4e46998f3e57 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 /dev/sda1 /media/ken/Linux-Data ext3 defaults 0 2 /dev/sda5 /media/ken/Data2 ext4 defaults 0 2 The device designations in the last 2 lines are the ones in question. The fstab entries to NOT change between system restarts but the mount points in the GPARTED display do. Does anyone have a fix for this? Thanks Mr. Young and Mr Gedak, Following is my fstab file and two blkid outputs. The fstab output is correct. The first blkid output was after a reboot and is WRONG! The sda and sdb device partition data is reversed. The 2nd blkid output was after a second reboot (fstab not changed). It shows the sda and adb partition data CORRECTLY. I didn't see any duplicate UUIDs. Does anyone have any idea why the GPARTED and blkid outputs alternate on consecutive reboots? The alternating partition data is real since when the partition assignments are reversed, the boot sequence halts with disk mounting errers (I have to press "s" to skip the mounts). Thanks again. Ken I copied the contents of a text file showing my fstab and 2 blkid outputs. The text file contents show up in the text entry box but does not appear in the main body of the question. Is there a way I can attach the text file or edit this question so that the text is displayed for question viewers?

    Read the article

  • Webcam doesn't work in browser...?

    - by ReticentGrace
    I'm running the latest version of Ubuntu, and I have a Dell Sp2009wfd monitor with built in microphone and webcam. I've gotten the microphone working on mumble and on sound recorder, and I've gotten the webcam to work on Cheese...but it WON'T work through the flash player//website webcam things. I -have- the flash plugin, and I have drivers installed for my video card. Could anyone help me figure this out? It's really frustrating. Thank you...!

    Read the article

  • Should I install the ubuntu-restricted-extras package?

    - by jasoncruz98
    I installed Mozilla Firefox beta 9 and the Mozilla flash plugin as a .tar.gz file. I unpacked it, installed it and now I can watch Youtube videos smoothly. But I want to play mp3 codecs and other restricted stuff on my laptop. Should I uninstall the flash plugin for Mozilla Firefox or just install the ubuntu-restricted-extras package (which contains everything I need)? If I install the package without uninstalling the Mozilla plugin, will anything bad happen?

    Read the article

  • What location to put bootloader, when running multiple drives and partition

    - by Matt G
    I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

    Read the article

  • ???????????I/O?SSD????!

    - by Yusuke.Yamamoto
    ????? ??:2010/11/25 ??:???? ?????????????????????I/O???????????????? Oracle Database 11g Release 2 ?????Database Smart Flash Cache?????????????????????????????????????????????????????? ???????????????????SSD????????????"?????(??)"???????????????????? Database Smart Flash Cache ???OLTP??+?????????????????OLTP??+OLTP???10????????? ????????? ????????????????? http://oracletech.jp/products/pickup/000076.html

    Read the article

  • Optimizing transition/movement smoothness for a 2D flash game.

    - by Tom
    Update 6: Fenomenas suggested me to re-create everything as simple as possible. I had my doubts that this would make any difference as the algorithm remains the same, and performance did not seem to be the issue. Anyway, it was the only suggestion I got so here it is: 30 FPS: http://www.feedpostal.com/test/simple/30/SimpleMovement.html 40 FPS: http://www.feedpostal.com/test/simple/40/SimpleMovement.html 60 FPS: http://www.feedpostal.com/test/simple/60/SimpleMovement.html 100 FPS: http://www.feedpostal.com/test/simple/100/SimpleMovement.html The code: package { import flash.display.Sprite; import flash.events.Event; import flash.events.KeyboardEvent; import flash.utils.getTimer; [SWF(width="800", height="600", frameRate="40", backgroundColor="#000000")] public class SimpleMovement extends Sprite { private static const TURNING_SPEED:uint = 180; private static const MOVEMENT_SPEED:uint = 400; private static const RADIAN_DIVIDE:Number = Math.PI/180; private var playerObject:Sprite; private var shipContainer:Sprite; private var moving:Boolean = false; private var turningMode:uint = 0; private var movementTimestamp:Number = getTimer(); private var turningTimestamp:Number = movementTimestamp; public function SimpleMovement() { //step 1: create player object playerObject = new Sprite(); playerObject.graphics.lineStyle(1, 0x000000); playerObject.graphics.beginFill(0x6D7B8D); playerObject.graphics.drawRect(0, 0, 25, 50); //make it rotate around the center playerObject.x = 0 - playerObject.width / 2; playerObject.y = 0 - playerObject.height / 2; shipContainer = new Sprite(); shipContainer.addChild(playerObject); shipContainer.x = 100; shipContainer.y = 100; shipContainer.rotation = 180; addChild(shipContainer); //step 2: install keyboard hook when stage is ready addEventListener(Event.ADDED_TO_STAGE, stageReady, false, 0, true); //step 3: install rendering update poll addEventListener(Event.ENTER_FRAME, updatePoller, false, 0, true); } private function updatePoller(event:Event):void { var newTime:Number = getTimer(); //turning if (turningMode != 0) { var turningDeltaTime:Number = newTime - turningTimestamp; turningTimestamp = newTime; var rotation:Number = TURNING_SPEED * turningDeltaTime / 1000; if (turningMode == 1) shipContainer.rotation -= rotation; else shipContainer.rotation += rotation; } //movement if (moving) { var movementDeltaTime:Number = newTime - movementTimestamp; movementTimestamp = newTime; var distance:Number = MOVEMENT_SPEED * movementDeltaTime / 1000; var rAngle:Number = shipContainer.rotation * RADIAN_DIVIDE; //convert degrees to radian shipContainer.x += distance * Math.sin(rAngle); shipContainer.y -= distance * Math.cos(rAngle); } } private function stageReady(event:Event):void { //install keyboard hook stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDown, false, 0, true); stage.addEventListener(KeyboardEvent.KEY_UP, keyUp, false, 0, true); } private final function keyDown(event:KeyboardEvent):void { if ((event.keyCode == 87) && (!moving)) //87 = W { movementTimestamp = getTimer(); moving = true; } if ((event.keyCode == 65) && (turningMode != 1)) //65 = A { turningTimestamp = getTimer(); turningMode = 1; } else if ((event.keyCode == 68) && (turningMode != 2)) //68 = D { turningTimestamp = getTimer(); turningMode = 2; } } private final function keyUp(event:KeyboardEvent):void { if ((event.keyCode == 87) && (moving)) moving = false; //87 = W if (((event.keyCode == 65) || (event.keyCode == 68)) && (turningMode != 0)) turningMode = 0; //65 = A, 68 = D } } } The results were as I expected. Absolutely no improvement. I really hope that someone has another suggestion as this thing needs fixing. Also, I doubt it's my system as I have a pretty good one (8GB RAM, Q9550 QuadCore intel, ATI Radeon 4870 512MB). Also, everyone else I asked so far had the same issue with my client. Update 5: another example of a smooth flash game just to demonstrate that my movement definitely is different! See http://www.spel.nl/game/bumpercraft.html Update 4: I traced the time before rendering (EVENT.RENDER) and right after rendering (EVENT.ENTER_FRAME), the results: rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 14 ms rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 24 ms rendering took: 18 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 232 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms The range is 12-16 ms. During these differences, the shocking/warping/flickering movement was already going on. There is also 1 peak of 232ms, at this time there was a relatively big warp. This is however not the biggest problme, the biggest problem are the continuous small warps during normal movement. Does this give anyone a clue? Update 3: After testing, I know that the following factors are not causing my problem: Bitmap's quality - changed with photoshop to an uglier 8 colours optimized graphic, no improvement at all. Constant rotation of image while turning - disabled it, no improvement at all Browser rendering - tried to use the flash player standalone, no improvement at all I am 100% convinced that the problem lies in either my code or in my algorithm. Please, help me out. It has been almost two weeks (1 week that I asked this question on SO) now and I still have to get my golden answer. Update 1: see bottom for full flex project source and a live demo demonstrating my problem. I'm working on a 2d flash game. Player ships are created as an object: ships[id] = new GameShip(); When movement and rotation information is available, this is being directed to the corresponding ship: ships[id].setMovementMode(1); //move forward Now, within this GameShip object movement works using the "Event.ENTER_FRAME" event: addEventListener(Event.ENTER_FRAME, movementHandler); The following function is then being run: private final function movementHandler(event:Event):void { var newTimeStamp:uint = UtilLib.getTimeStamp(); //set current timeStamp var distance:Number = (newTimeStamp - movementTimeStamp) / 1000 * movementSpeed; //speed = x pixels forward every 1 second movementTimeStamp = newTimeStamp; //update old timeStamp var diagonalChange:Array = getDiagonalChange(movementAngle, distance); //the diagonal position update based on angle and distance charX += diagonalChange[0]; charY += diagonalChange[1]; if (shipContainer) { //when the container is ready to be worked with shipContainer.x = charX; shipContainer.y = charY; } } private final function getDiagonalChange(angle:Number, distance:Number):Array { var rAngle:Number = angle * Math.PI/180; //convert degrees to radian return [Math.sin(rAngle) * distance, (Math.cos(rAngle) * distance) * -1]; } When the object is no longer moving, the event listener will be removed. The same method is being used for rotation. Everything works almost perfect. I've set the project's target FPS to 100 and created a FPS counter. According to the FPS counter, the average FPS in firefox is around 100, while the top is 1000 and the bottom is 22. I think that the bottom and top FPSs are only happening during the initialization of the client (startup). The problem is that the ship appears to be almost perfectly smooth, while it should be just that without the "almost" part. It's almost as if the ship is "flickering" very very fast, you can't actually see it but it's hard to focus on the object while it's moving with your eyes. Also, every now and then, there seems to be a bit of a framerate spike, as if the client is skipping a couple of frames, you then see it quickly warp. It is very difficult to explain what the real problem is, but in general it's that the movement is not perfectly smooth. So, do you have any suggestions on how to make the movement or transition of objects perfectly smooth? Update 1: I re-created the client to demonstrate my problem. Please check it out. The client: http://feedpostal.com/test/MovementTest.html The Actionscript Project (full source): http://feedpostal.com/test/MovementTest.rar An example of a smooth flash game (not created by me): http://www.gamesforwork.com/games/swf/Mission%20Racing_august_10th_2009.swf It took me a pretty long time to recreate this client side version, I hope this will help with solving the problem. Please note: yes, it is actually pretty smooth. But it is definitely not smooth enough.

    Read the article

  • Embedding a flash object old SWF markup? Will this work??

    - by user342391
    I am embedding a flash object into my site and when I do I get a message from dreamweaver saying "This page contains some swf objects that may not work correctly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups please delete each of them and insert them again" I am not aware of any new SWF markups but here is my code to check maybe I am doing something wrong: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> </head> <body> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="350" height="140" title="Flash Audio Recorder"> <param name="movie" value="AudioRecorder.swf" /> <param name="allowScriptAccess" value="sameDomain" /> <param name="quality" value="high" /> <param name="FlashVars" value="userid=2&settings=myXML/settings.xml" /> <embed src="AudioRecorder.swf" FlashVars="userid=2&settings=myXML/settings.xml" allowScriptAccess="sameDomain" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="350" height="140"></embed> </object> </body> </html>

    Read the article

  • How to make flash movie to scale proportunatly to div width?

    - by user73119
    I have put together an example page detailing my problem My website is going to have a main wrapper that is set to a max-width property for compatible browsers. It will stretch to 940px across at max. When scaled down I would like the swf to scale proportionately with it. Like an image with width percent applied. The flash movie has the dimensions of 940 × 360 pixels. I can't seem to figure out the correct attributes to add to the embed tag to get it to do this. I am currently using jquery flash embed, but am open to other options, though this is my ideal. In the example I have set the flash background to black. When resize the browser window the flash movie doesn't scale proportionately to the div, only the photo does, leaving a blank canvas (black), while the div height stays the same. I can't add a height value in the CSS. How do I make this scale correctly? Adding a noscale param only crops the image. The swf's height doesn't scale also. All of my code can be viewed in the linked examples source.

    Read the article

  • Flash compiler error 1061: Call to a possibly undefined method run... but run exists!

    - by Zane Geiger
    So I've been working on making a game in Processing but I think Flash would be a better way to get more people playing it, so I've decided to learn Flash. The problem is that I keep getting really stupid errors on incredibly simple things. For instance, I want to make a 'Block' object to use in a platform game. So I make a new .as file, name it Block.as, and define the Block class within it like so: package { public class Block { public function Block() { // constructor code } public function run() { } } } I don't want to add the code yet, I just want to ensure that this works. So in my main timeline code, I try to create an instance of the Block object and execute its run method: var block1:Block = new Block(); block1.run(); Every time it gives me this inane error: Scene 1, Layer 'Layer 1', Frame 1, Line 2 1061: Call to a possibly undefined method run through a reference with static type Block. What undefined method!? It's defined RIGHT THERE in Block.as. The class file is even in the same folder and everything. I'm getting REALLY annoyed at how poorly Flash handles such a ridiculously simple project. Does anyone know why Flash hates me?

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >