Search Results

Search found 2153 results on 87 pages for 'gnu maker'.

Page 54/87 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• error while installing binutils in LFS

  - by user53347

  lfs:/mnt/lfs/sources/binutils-build$ ../binutils-2.15.94.0.2.2/configure \ --target=$LFS_TGT --prefix=/tools \ --disable-nls --disable-werror loading cache ./config.cache checking host system type... i686-pc-linux-gnuoldld checking target system type... i686-lfs-linux-gnu checking build system type... i686-pc-linux-gnuoldld checking for a BSD compatible install... /usr/bin/install -c checking whether ln works... yes checking whether ln -s works... yes checking for gcc... no checking for cc... no configure: error: no acceptable cc found in $PATH

  Read the article

• How to create a filesystem mountable by windows in linux?

  - by wcoenen

  I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this: created a single partition with fdisk /dev/sdc (and some more commands in the interactive session that follows) formatted the partition with mkfs.msdos /dev/sdc1 If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized. How do I create a FAT32 file system which can actually be used in windows? edit: I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.

  Read the article

• Restreaming video from XSplit to multiple JustinTV/TwitchTV channels in different resolutions and bitrates

  - by lmojzis

  I have a really simple question but the answer may be a little more complex I guess. Okay. Let's go. I have an Application called Xsplit Broadcaster (http://www.xsplit.com/). It supports streaming video through RTMP. Now what I want to do is this: +--(720p)--> TwitchTV FirstChannel XSplit --(720p RTMP)-->[MyTranscodingServer]--+ +--(360p)--> TwitchTV SecondChannel Is there a simple way to do this? Additional info: Both channels accept standard RTMP stream on their RTMP endpoint using either username/password or streamkey. The server operating system is GNU/Linux

  Read the article

• Updating autoreconf

  - by AzaraT

  So I need to use the autoreconf to configure a package. However I need at least version 2.61. I'm on CentOS 5.8 and it seems like there's no package for it so I went on to compile it myself. So I get the source of autoconf from http://www.gnu.org/software/autoconf/ and compiled that. And sure when I do autoconf -V it shows up as version 2.68 which is indeed the latest version. However autoreconf (nothing the re) still shows up as the old version 2.59 which causes me some problems. So could someone help a relatively new linux user, updating autoreconf properly? Thanks

  Read the article

• Labeling values in a GNUplot heatmap

  - by andremo

  I am trying to generate a heat map using gnu plot. set title "Heat Map" plot '-' matrix with image 10 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 0 30 40 50 60 70 80 90 100 0 0 40 50 60 70 80 90 100 0 0 0 50 60 70 80 90 100 0 0 0 0 60 70 80 90 100 0 0 0 0 0 70 80 90 100 0 0 0 0 0 0 80 90 100 0 0 0 0 0 0 0 90 100 0 0 0 0 0 0 0 0 100 0 0 0 0 0 0 0 0 0 e Along the axes I get values -2 0 2 4 6 8 10, and I would like to replace those with a custom string. I cannot find out how to do this.

  Read the article

• Why is the size of windows off by 226x238 if defined via the Window Rules?

  - by Bobby

  I have installed Sawfish 1.8.2 from source on my new Ubuntu 12.04 installation following the Debian instructions, but I had this problem also with the stock 1.5.3. Whenever I define dimensions in the Window Rules for a window, the size is off by exactly 226x238 pixels, which means that 100x100 turns into 326x328. That's a very odd behavior, given that Sawfish is saving and loading the dimensions of the windows correctly (if saved via the window menu). Some additional system information: $ uname -a Linux Dagon 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ sawfish --version sawfish version 1.8.2 nvidia proprietary driver, 9600GT Two monitors, 1920x1080 + 1440x900 in one session. Positionng the windows is working fine, only the dimensions are off by that odd number. Does somebody have an idea why?

  Read the article

• Windows 7 "Could not reconnect all network drives" on boot

  - by Thermionix

  Windows 7 won't reconnect to my network drives on startup. Once it is done booting opening Windows Explorer and clicking each share will mount them. Windows 7 Enterprise N Service Pack 1 I have attempted formatting the windows machine - first thing done to machine was to map the network drives, upon reboot they were disconnected. It is running on an Crucial M4 64gb SSD. The host of the network shares is a Ubuntu-Server machine connected through a gigabit switch. A modem provides dhcp, although both these machines have static IP's defined. It won't reconnect the drives regardless of whether they're SAMBA shares or NFS shares - therefore I believe it's an issue with the windows machine. Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) I've tried using ip address instead of netbios name for mapping shares on the windows machine, Also tried setting EnableLinkedConnections=1 gpedit.msc Computer Configuration - Administrative Templates - System-Logon - always wait for the network at computer startup and logon = yes

  Read the article

• after install python 2.7.3 yum is broken

  - by user468587

  i installed libxml2-2.9.0 and libxslt-1.1.27 then yum is broken any yum command that i ran i got the result of : There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Jan 21 2009, 01:11:33) [GCC 4.1.2 20071124 (Red Hat 4.1.2-42)] If you cannot solve this problem yourself, please go to the yum faq at: http://yum.baseurl.org/wiki/Faq then i thought python version is way too old and install python 2.7.3 and install it from scratch, after some wrong trials it got worse and worse, now when i run 'python -V' i got version 'Python 2.7.3', when i run '/usr/bin/python -V', it returned 'python-2.4.3-24.el5', and no matter what i did the yum is still broken with that message. how can i get yum back? my os is: linux 2.6.18-164.11.1.el5 x86_64 GNU/Linux

  Read the article

• Excluding certain file types in wget

  - by Alan Spark

  I have been using wget for a while now to mirror files from an ftp server to a local folder. My wget command is as follows: wget -mirror -w 1 -p -nH -P /var/www/ ftp://my-ftp-server However, I just noticed that it is copying over a .listing file for every folder that it visits. So, even if nothing has been changed on the ftp server, a .listing file will always be copied. My understanding is that the .listing file is created when wget opens the ftp session. Is there a way to avoid this? I've tried the -R option (e.g. -R .listing) but this didn't help. See: http://www.gnu.org/software/wget/manual/wget.html#Recursive-Accept_002fReject-Options Thanks, Alan

  Read the article

• Does exportfs disrupt users already utilizing those filesystems?

  - by CptSupermrkt

  I need to modify a servers /etc/exports file to export to an additional host. After modifying this file, for it to take effect (i.e. for the additional host to have access to the designated filesystem), I believe I have to run "exportfs" on the server exporting the filesystem. Does this disrupt users who are currently using filesystems that are exported from that serving host? I'm hoping to add this new host "silently", without disruption. Any additional advice related to this, common traps, things to be careful of, etc. would be appreciated if you have any. Edit: just in case...uname -a returns 2.6.32-358.18.1.el6.x86_64 #1 SMP Fri Aug 2 17:04:38 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• modprobe not found at all

  - by timmeyh

  I know that a lot of people had problems finding modprobe which was mostely due to an unconfigured $PATH. This time however I logged into a machine (Linux mymachine 2.6.32-6-pve #1 SMP Mon Jan 23 08:27:52 CET 2012 i686 GNU/Linux with root rights) and modprobe wasn't found at all. This are the steps I have taken so far: - which modprobe => no results - locate modprobe => no results - my $PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11: - find / -name "modprobe*" => /proc/sys/kernel/modprobe - cat /proc/sys/kernel/modprobe => /sbin/modprobe - /sbin/modprobe => no such file or directory Ass you can see no modprobe at all. Does anyone else has a suggestion/ sollution so I can use modprobe?

  Read the article

• Iptables REDIRECT + openvpn problem

  - by Emilio

  I want to redirect connection to port 22 to my openvpn binded port, on 60001. Openvpn is running on server on 60001 server:~$ sudo netstat -apn | grep openvpn udp 0 0 67.xx.xx.137:60001 0.0.0.0:* 4301/openvpn I redirect on server port 22 to 60001 server:~$ sudo iptables -F -t nat server:~$ sudo iptables -A PREROUTING -t nat -p udp --dport 22 -j REDIRECT --to-ports 60001 I start openvpn client (openvpn.conf is correct, it works with remote IP 22 replaced with remote IP 60001) client:~$ ./openvpn openvpn.conf Tue Apr 27 00:42:50 2010 OpenVPN 2.1.1 i686-pc-linux-gnu [SSL] [EPOLL] built on Mar 23 2010 Tue Apr 27 00:42:50 2010 UDPv4 link local (bound): [undef]:1194 Tue Apr 27 00:42:50 2010 UDPv4 link remote: 67.xx.xx.137:22 Tue Apr 27 00:42:52 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Tue Apr 27 00:42:55 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) ... It doesn't connect. iptables shows requests from client to server but no answers. What's wrong with it?

  Read the article

• X server not starting up after new kernel compilation

  - by tech_learner

  I have compiled the Kernel on my 64-bit Debian XPS Studio 1340 Dell system. srikanth@debian:~ - 05:40:52 PM - $ uname -a Linux debian 2.6.32-5-amd64 #1 SMP Thu Mar 22 17:26:33 UTC 2012 x86_64 GNU/Linux Kernel version that I have used and compiled from kernel.org is 2.6.35.13 I have nvidia installed on old kernel. I got the old config and I used the same config to compile the new kernel. Everything went well and I got two debian packages ( image and headers ) which I have installed on my system. When I select the new kernel on the boot menu and I go into it, the X server is not starting up possibly because I have to "rebuild" ( not sure how to do that ) according to this link: http://www.linuxquestions.org/questions/slackware-14/x-server-not-starting-after-kernel-compilation-605265/ Can you suggest how to do the rebuild on nvidia module so that I can start x ( without seeing any blank screen or error saying nvidia module is missing ) ? PS: The link that I have used to compile the kernel is https://help.ubuntu.com/community/Kernel/Compile#Alternate_Build_Method:_The_Old-Fashioned_Debian_Way

  Read the article

• What's the typical latency for key strokes using an ssh connection on a local wifi network?

  - by dan

  I develop software on a Macbook Air 1.6 Ghz but find running Rails test suites and generators on this computer very slow. I'm thinking about buying a Linux tower to put on my local wireless network to do my Rails development on. I would want to use my Macbook Air and ssh into the Linux box and do my development with Gnu Screen, vim, etc. Can I expect the keystroke and echo latency for a ssh session between two machines on a local wireless network to be negligible? Does anyone develop using this kind of local setup?

  Read the article

• Deleting slow on X11 emacs

  - by Malvolio

  I'm running GNU Emacs 21.4.1 on a (remote) remote Linux ((CentOS) box, using my MacBook as the X-server. Works fine, unless I try to delete a word, line, or region. Then it locks up for 30 seconds or so. It sounds like a minor thing, but you realize how often you do a delete when you have to stop for 30 seconds every time. My theory is that Emacs is trying to put the text in the X-server cut-and-paste buffer, which is trying to put it in the OSX cut-and-paste buffer and somewhere along the way, the process is blocked until it times out. (My only evidence for this theory is (a) copy-region behaves the same way and (b) deleted text doesn't show up in the buffer.) Any suggestions appreciated. Edit: (setq interprogram-cut-function nil) fixed me right up. Which makes perfect sense. Thanks, Trey.

  Read the article

• wget recursively with -np option still ascends to parent directory

  - by vectra

  tl;dr: will `wget --no-parrent -r ' download from a directory above the given url's directory? when using wget to download, say images, recursively from example.com/a/b with the -r and -np options, will a picture that is under example.com/a/c/ be downloaded when example.com/a/b/ delivers a html-file containing a link to the picture? if so, how do i get all pictures, that are in a folder and it's subfolders and only those? the description of the option --no-parent says "Do not ever ascend to the parent directory when retrieving recursively". anyway directory browsing delivers a link to the parent directory, which wget will follow, despite mentioned option. now what did i miss? edit: using GNU Wget 1.12

  Read the article

• PHP Requests Being Blocked After Making About 25 in Ten Minutes

  - by Daniel Stern

  We have an administrative portal where we run PHP functions through a Javascript portal using ajax for administrative purposes. For example, we might have a function called updateAllDatabaseEntries() which would call AJAX functions in rapid succession, with those functions each executing numerous SQL queries. The problem is after making several successive requests from the same computer (not an excessive amount, maybe 30 in ten minutes) the system will stop responding to any PHP, HTTP requests ETC ONLY from my computer. From other computers in the office the panel can still be accessed, and access is restored to this computer after about 15 minutes. We believe this is not a glitch but some kind of security feature built into our server, possibly relating to Suhosin and likely well-intentioned but currently preventing us from running our system administration. Server Info: Linux 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux Cheers - DS

  Read the article

• Disable Thunderbird "failed to connect" notifications

  - by The Electric Muffin

  My network manager doesn't start until I log in, so for the first ten seconds or so after I login I have no Internet connection. The problem is that I have Thunderbird set to automatically start on login, so it helpfully tells me it "failed to connect" every time I log in. Also, my Internet connection isn't too reliable, so I sometimes get those messages even when I'm supposedly connected. Is there any way to disable these notifications, while still allowing the ones about new mail? Computer info: Thunderbird 15.0 $ uname -a Linux [HOSTNAME REDACTED] 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Probably irrelevant: NetworkManager Version 0.9.0.1 (nm09 20120407) KDE Platform Version 4.8.4 (4.8.4)

  Read the article

• Raid system fails to boot after moving from 2.6 kernel to 3.5

  - by user846226

  I'm running Gentoo Linux with a custom compiled kernel and I've just migrated from a 2.6 kernel to a 3.5. As my HD's are on RAID 0 mode I use a custom initrd file in order to be able to boot. While kernel 2.6 is able to boot without problems the new 3.5 compiled kernel fails to boot complaining about no block devices found. After taking a look at initrd.cpio contained scripts I can see the failure message is given by mdadm tool. Does anyone has a clue about that? Edit: this morning i noticed there was some kind of issue on my old initrd which works fine for 2.6 kernels, so created a new initrd which works fine and let me to boot into GNU/Gentoo Linux with same 3.5 bzImage. It could be an issue of mdadm, gonna check it. https://bugs.gentoo.org/show_bug.cgi?id=416081

  Read the article

• Getting FreeNX client to work on Mac OS again.

  - by Fantomas

  This problem is not uncommon, but I have not seen a solution that would work for me. Keyboard mapping is completely screwed up - e.g. typing 'damn it' gives me '1cxngw'. All machines have QWERTY keyboards and are set up to use US. [Client] Mac OS version: Version: 10.5.8, Build: 9L30 [Client] Kernel version uname -a Darwin <comp name> 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 [Client] FreeNX Client version: 3.4.0-8 [Client] MacPorts version: MacPorts 1.8.2 [Client] The X Windows System: XQuartz 2.5.0 (xorg-server 1.7.6) [Server] OS: Ubuntu 9.04 [Server] Kernel: uname -a Linux <comp.name> 2.6.28-18-generic #60-Ubuntu SMP <date> x86_64 GNU/Linux [Server] Other info: please ask for it but do tell me how to query/look for it. Thanks!

  Read the article

• vsftpd chroot_local_user does nothing

  - by Reinderien

  Hello all. I'm setting up a vsftpd server on: Linux 2.6.32-26-server #48-Ubuntu SMP Wed Nov 24 10:28:32 UTC 2010 x86_64 GNU/Linux When I set chroot_local_user=YES, there is no effect (I can still see / when I log in). There is nothing in syslog or /var/log/vsftpd.log to indicate what's wrong. I know that I'm editing the right conf file and that other settings do come into effect when I restart the daemon, because these work: ssl_enable=YES force_local_data_ssl=YES force_local_logins_ssl=YES Any idea what's wrong? Thanks.

  Read the article

• rsync windows to linux permission denied

  - by user64908

  Using Command rsync -avzP --delete --omit-dir-times ../../ [email protected]:/var/www/mysite/ I'm getting rsync: mkstemp "/var/www/mysite/.." failed: Permission denied (13) If ext is in the www-data group should I still set all the files to be owned by user www-data? I am trying to publish the files with rsync and then set the permissions using sudo chown -R www-data doc sudo chgrp -R www-data doc but I can't even rsync because of the permission denied. The SSH works fine, the rsync too except when it tries to write over or update some of the files in /var/www Client * Windows 7 * Cygwin 1.7.16 (GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)) * rsync version 3.0.9 protocol version 30 Server * Ubuntu 12.04 * Apache2 * Root Accounts [ubuntu,ext] * Groups [www-data] * sudo vigr has www-data:x:33:ubuntu,ext I have already configure this http://stackoverflow.com/questions/2124169/cwrsync-ignores-nontsec-on-windows-7 This article has also managed to confuse me http://unix.stackexchange.com/questions/41687/how-should-i-rsync-files-in-var-www-if-i-want-them-to-be-owned-by-www-data What is the right procedure?

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• Emacs: Changing the location of auto-save files

  - by Dominic Rodger

  I've currently got: (setq backup-directory-alist `((".*" . ,temporary-file-directory))) (setq auto-save-file-name-transforms `((".*" ,temporary-file-directory t))) in my .emacs, but that doesn't seem to have changed where auto-save files get saved (it has changed where backup files get saved. M-x describe-variable shows that temporary-file-directory is set to /tmp/, but when I edit a file called testing.md and have unsaved changes, I get a file called .#testing.md in the same directory. How can I make that file go somewhere else (e.g. /tmp/)? I've had no luck with these suggestions, so any suggestions welcome! If it helps, I'm on GNU Emacs 23.3.1, running Ubuntu.

  Read the article

• How to disable ^C from being echoed on Linux on Ctrl-C

  - by pts

  When I press Ctrl-C in any pseudoterminal (xterm, gnome-terminal, rxvt, text console and SSH) in Karmic Koala, the string ^C gets echoed to the terminal in Ubuntu Karmic Koala. This hasn't happened in Ubuntu Jaunty Jackalope. I'd like to get rid of the extra ^C. Example: $ cat foo foo ^C $ _ I got the above by typing C, A, T, Enter, F, O, O, Enter, Ctrl-C. I want to get rid of the ^C, and get this for the same keypresses: $ cat foo foo $ _ I tried setting stty -echoctl, which created a single-character HT (or a box with Unicode 0003 in it) instead of the ^C. I want to see absolutely nothing when I press Ctrl-C. I'm using Linux linux 2.6.31-20-generic-pae #57-Ubuntu SMP Mon Feb 8 10:23:59 UTC 2010 i686 GNU/Linux

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >