Search Results

Search found 10369 results on 415 pages for 'png 24'.

Page 54/415 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Neighbour table overflow on Linux hosts related to bridging and ipv6

    - by tim
    Note: I already have a workaround for this problem (as described below) so this is only a "want-to-know" question. I have a productive setup with around 50 hosts including blades running xen 4 and equallogics providing iscsi. All xen dom0s are almost plain Debian 5. The setup includes several bridges on every dom0 to support xen bridged networking. In total there are between 5 and 12 bridges on each dom0 servicing one vlan each. None of the hosts has routing enabled. At one point in time we moved one of the machines to a new hardware including a raid controller and so we installed an upstream 3.0.22/x86_64 kernel with xen patches. All other machines run debian xen-dom0-kernel. Since then we noticed on all hosts in the setup the following errors every ~2 minutes: [55888.881994] __ratelimit: 908 callbacks suppressed [55888.882221] Neighbour table overflow. [55888.882476] Neighbour table overflow. [55888.882732] Neighbour table overflow. [55888.883050] Neighbour table overflow. [55888.883307] Neighbour table overflow. [55888.883562] Neighbour table overflow. [55888.883859] Neighbour table overflow. [55888.884118] Neighbour table overflow. [55888.884373] Neighbour table overflow. [55888.884666] Neighbour table overflow. The arp table (arp -n) never showed more than around 20 entries on every machine. We tried the obvious tweaks and raised the /proc/sys/net/ipv4/neigh/default/gc_thresh* values. FInally to 16384 entries but no effect. Not even the interval of ~2 minutes changed which lead me to the conclusion that this is totally unrelated. tcpdump showed no uncommon ipv4 traffic on any interface. The only interesting finding from tcpdump were ipv6 packets bursting in like: 14:33:13.137668 IP6 fe80::216:3eff:fe1d:9d01 > ff02::1:ff1d:9d01: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:9d01, length 24 14:33:13.138061 IP6 fe80::216:3eff:fe1d:a8c1 > ff02::1:ff1d:a8c1: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:a8c1, length 24 14:33:13.138619 IP6 fe80::216:3eff:fe1d:bf81 > ff02::1:ff1d:bf81: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:bf81, length 24 14:33:13.138974 IP6 fe80::216:3eff:fe1d:eb41 > ff02::1:ff1d:eb41: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:eb41, length 24 which placed the idea in my mind that the problem maybe related to ipv6, since we have no ipv6 services in this setup. The only other hint was the coincidence of the host upgrade with the beginning of the problems. I powered down the host in question and the errors were gone. Then I subsequently took down the bridges on the host and when i took down (ifconfig down) one particularly bridge: br-vlan2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:120 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5286 (5.1 KiB) TX bytes:726 (726.0 B) eth0.2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1801 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:126228 (123.2 KiB) TX bytes:1464 (1.4 KiB) bridge name bridge id STP enabled interfaces ... br-vlan2158 8000.0026b9fb162c no eth0.2158 br-vlan2159 8000.0026b9fb162c no eth0.2159 The errors went away again. As you can see the bridge holds no ipv4 address and it's only member is eth0.2159 so no traffic should cross it. Bridge and interface .2159 / .2157 / .2158 which are in all aspects identical apart from the vlan they are connected to had no effect when taken down. Now I disabled ipv6 on the entire host via sysctl net.ipv6.conf.all.disable_ipv6 and rebooted. After this even with bridge br-vlan2159 enabled no errors occur. Any ideas are welcome.

    Read the article

  • Postfix not sending/allowing receiving of messages after server (hardware) changed

    - by 537mfb
    We had na old notebook runing Ubuntu 12.04 working as a web/ftp/mail server and it worked but since the notebook was a notebook and pretty old and unreliable, a desktop was bought to replace it before it stopped working all together. Due to issues with the new desktop's vídeo card, we couldn't use Ubuntu 12.04 so we installed Ubuntu 13.10 and wen't about configuring it. Since we removed the notebook from the network, we kept the same Computer Name and local IP address to make things as close to the old server as possible configuration-wise. However, something has gone wrong since Postfix is throwing error 451 4.3.0 lookup faillure on every attempt to send a mail, and no email can be received either. Our main.cf file is a copy of the one we were using (and working) on the old server (notice we use EHCP) # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name powered by Easy Hosting Control Panel (ehcp) on Ubuntu, www.ehcp.net biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no myhostname = m21-traducoes.com.pt relayhost = mydestination = localhost, 89.152.248.139 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 89.152.248.0/24 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtp_use_tls = yes smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes debug_peer_list = sender_canonical_maps = debug_peer_level = 1 proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $mynetworks $virtual_mailbox_limit_maps $transport_maps alias_maps = hash:/etc/aliases smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtpd_destination_concurrency_limit = 2 smtpd_destination_rate_delay = 1s smtpd_extra_recipient_limit = 10 disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 This configuration was working before but now everytime i try to send a mail in squirrelmail it reports: Message not sent. Server replied: Requested action aborted: error in processing 451 4.3.0 <[email protected]>: Temporary lookup failure And i can't send mail to it from outsider either. Any ideas? EDIT: Here are some issues MXToolBox reports to my domain, answering hopefully to @Teun Vink: BlackList Mail Server Web Server DNS Error 4 0 2 0 Warnings 0 0 0 3 Passed 0 6 3 12 So the domain is on some blacklist, but that doesn't explain the error at all No mail server issues found (except it's not working) Those two web server errors it's because i don't have HTTPS workin (No SSL Certificate) so the test fails Those 3 DNS warnings we're already there when it was working with the other machine and are related to stuff i can't control: SOA Refresh Value is outside of the recommended range SOA Expire Value out of recommended range SOA NXDOMAIN Value too high I've searched and as far as i can tell only the guys who sold the retail can change those values and they won't. Edit2: I half solved the issue.on the new machine postfix was installed but postfix-mysql waasn't so he couldn't connect to the database (rookie mistake). After fixing that, i can now send mails to the outsider without any issues, however i am still not able to receive mails from utside. The sender doesn't get any message warning about the non-delivery but the message doesn't fall in the inbox and the log shows: Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: NOQUEUE: reject: RCPT from re lay4.ptmail.sapo.pt[212.55.154.24]: 451 4.3.5 <relay4.ptmail.sapo.pt[212.55.154. 24]>: Client host rejected: Server configuration error; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<sapo.pt> Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: disconnect from relay4.ptmail .sapo.pt[212.55.154.24]

    Read the article

  • Parallel processing slower than sequential?

    - by zebediah49
    EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

    Read the article

  • /phpTest/zologize/axa.php? Another botnet?

    - by M132
    Starring at the log made me think, what is /phpTest/zologize/axa.php and why are bots looking for it? Previously, I had lots of /HNAP1/ requests. Requesting /HNAP1/ from IPs from log revealed, that all of them were sent by Linksys routers. 3 months later, these requests turned out to be generated by a router worm called TheMoon. But requesting /phpTest/zologize/axa.php from these servers returns a 404 error. How these servers got infected, and how can I protect mine from this? 124.11.224.69 - - [02/Feb/2014:00:37:16 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 140.113.238.121 - - [21/Feb/2014:01:24:32 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 77.121.132.79 - - [22/Feb/2014:00:03:56 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 142.4.201.210 - - [24/Feb/2014:21:54:33 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 212.83.168.39 - - [24/Feb/2014:23:16:00 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 87.117.229.210 - - [26/Feb/2014:06:34:58 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 78.100.82.99 - - [26/Feb/2014:08:25:48 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 198.50.205.219 - - [26/Feb/2014:09:59:11 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 210.60.142.107 - - [27/Feb/2014:00:12:12 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 101.109.4.73 - - [27/Feb/2014:08:50:46 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 61.91.128.158 - - [27/Feb/2014:08:59:15 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 201.188.41.175 - - [27/Feb/2014:11:25:42 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 220.133.137.2 - - [27/Feb/2014:12:12:46 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 203.156.104.88 - - [28/Feb/2014:18:11:49 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 61.19.52.58 - - [28/Feb/2014:22:02:56 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 84.2.92.40 - - [28/Feb/2014:23:04:17 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 58.64.205.11 - - [01/Mar/2014:06:08:33 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 113.61.200.151 - - [01/Mar/2014:18:25:25 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 178.33.219.12 - - [03/Mar/2014:14:41:48 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 74.63.220.132 - - [04/Mar/2014:01:16:44 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 187.141.230.106 - - [04/Mar/2014:15:39:26 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 103.22.181.146 - - [09/May/2014:17:16:56 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 502 166 "-" "-" 176.31.200.14 - - [10/May/2014:19:52:24 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 68 "-" "-" 124.120.92.70 - - [12/May/2014:16:19:40 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 68 "-" "-" 219.85.198.142 - - [15/May/2014:19:21:22 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 80.84.53.226 - - [23/May/2014:08:58:25 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 87.213.11.165 - - [25/May/2014:06:20:27 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 122.116.220.106 - - [25/May/2014:07:10:21 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 58.8.128.30 - - [29/May/2014:02:43:49 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 142.4.197.135 - - [29/May/2014:11:36:45 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 178.32.243.65 - - [30/May/2014:01:59:53 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 58.8.164.221 - - [30/May/2014:14:04:16 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 140.127.182.15 - - [01/Jun/2014:14:45:40 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 218.166.43.21 - - [01/Jun/2014:16:07:52 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 178.32.188.140 - - [01/Jun/2014:19:11:46 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 94.23.211.173 - - [05/Jun/2014:00:52:52 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 120.117.105.201 - - [05/Jun/2014:04:39:39 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 187.172.27.146 - - [05/Jun/2014:10:20:22 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 203.195.219.91 - - [05/Jun/2014:10:53:42 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-"

    Read the article

  • Can't configure frame relay T1 on Cisco 1760

    - by sonar
    For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

    Read the article

  • drop down menu will not display outside containing div in IE7..

    - by playahabana
    I am tearing my hair out over this, I have a dropdown menu using CSS and jQuery (thanks to Soh Tanaka) and it works perfectly in Firefox, Safari, Google chrome and I.E. 8, but in IE 7 it will not drop down outside the 'Banner div'. It drops below the nav div however. I have moved the nav div higher in the banner the result is the same, menu drops until it reaches the border of the banner div and then vanishes.... Below is the css. This is my first website and I have some limited understanding of what I am doing. The drop down menu includes transparent png's as links (I know, I know...but it's what the Boss wants...) please could someone take a quick scan at the below CSS and let me know what is wroong? Is this some form of the IE z-index bug? i have tried all different combinations of z-index and still I can't get a different result. . The html is below as well. Thankyou in advance #banner { position: relative; width: 62.5em; height: 12em; background-color: #46280A; background-image: url('images/includes/banner2.jpg'); background-repeat: no-repeat; background-position: center; -moz-box-shadow: -4px 6px 8px #000; -webkit-box-shadow: -4px 6px 8px #000; box-shadow: -4px 6px 8px #000; /* For IE 8 */ -ms-filter: "progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000')"; /* For IE 5.5 - 7 */ filter: progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000'); z-index: 1; } /*------------------------------------SCROLLER---------------------------------------------*/ #headlines{ position: absolute; top: 1.3em; right: 2.75em; overflow: hidden; height: 2.5em; width: 24em; background-color: #000000; display: block; z-index: 3; } #news{ position: relative; height: 3.1em; line-height: 2.5em; font-size: 0.8em color: #FFFF99; white-space: nowrap; overflow: hidden; font-family: Georgia,Arial; } #scrollerglass{ position: absolute; top: 0.95em; right: 2em; height: 52px; width: 410px; border: none; padding: 0.2em 0em 0em 0em; line-height: 0.7em; text-align: center; background-image: url('images/includes/scrollerglass.png'); background-color: transparent; background-repeat: no-repeat; background-position: center; opacity: 20; z-index: 10; } #scrollerglass a i { visibility: hiddn ; } /-------------------------------------NAVIGATION-----------------------------------------/ #nav { position: absolute; top: 5.8em; left: 0.2em; font-family: trebuchet, sans-serif; font-size: 1em; line-height: 3.75em; text-align: center; color: #FFFF00; z-index: 3; } ul.navlist { list-style: none; padding: 0em; margin: 1em; float: left; width: 62.5em; background: transparent; font-size: 1em; } ul.navlist li { position: relative; /*--Declare X and Y axis base for sub navigation--*/ float: left; margin: 0em 1.4em; padding: 0em 0.7em 0em 0em; z-index: 1; } ul.navlist li a{ display: block; text-decoration: none; float: left; border: 0px solid; } ul.navlist li img{ border: 0px solid; } ul.navlist li span { trigger styles--*/ width: 1.2em; height: 5.25em; float: left; background: url(images/links/downlogo.png) no-repeat center top; } ul.navlist li span.subhover { background-position: center bottom; cursor: pointer; } ul.navlist li ul.navdrop { list-style: none; position: absolute; float: left; top: 5.3em; left: -2.4em; height: 15.0em; width: 11.25em; margin: 0; padding: 0.5em 0em 0em 0em; display: none; background-position: center; background-image: url('images/includes/slider.jpg'); background-color: transparent; background-repeat: no-repeat; -moz-box-shadow: -4px 6px 8px #000; -webkit-box-shadow: -4px 6px 8px #000; box-shadow: -4px 6px 8px #000; /* For IE 8 */ -ms-filter: "progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000')"; /* For IE 5.5 - 7 */ filter: progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000'); z-index:1; } ul.navlist li ul.navdrop li{ margin: 0em 2.3em 0em 0em; padding: 1em 0em 0em 0em; width: 8em; clear: both; } html ul.navlist li ul.navdrop li a { border: 0px solid; width: 11.25em; } html ul.navlist li ul.navdrop li a:hover { background: transparent; } <div id="banner"> <div id="headlines"> <div id="news"> Whatever we want to promote </div> </div> <div id="scrollerglass"> <a href="vintagecigars.php"> <i>------s-c-r-o-l-l-e-r - - - -l-i-n-k-s--------<br /> <br>------s-c-r-o-l-l-e-r - - - -l-i-n-k-s------</i></a> </div> <div id="nav"> <ul class="navmenu"> <li><a href="index.php"><img src="images/links/home.png" alt="Home" ></a></li> <li><a href="ourbar.php"><img src="images/links/ourbar.png" alt="Our Bar" ></a> <ul class="navdrop"> <li ><a href="ourcocktails.php"><img src="images/links/cockteles.png" alt="Our Cocktails" ></a></li> <li ><a href="celebrate.php"><img src="images/links/celebrate.png" alt="Celebrate in Style" ></a></li> </ul> </li> <li><a href="ourcigars.php"><img src="images/links/ourcigars.png" alt="Our Cigars" ></a> <ul class="navdrop"> <li ><a href="edicioneslimitadas.php"><img src="images/links/edicioneslimitadas.png" alt="Edition Limitadas" ></a></li> <li ><a href="cigartasting.php"><img src="images/links/cigartasting.png" alt="Cigar Tastings" ></a></li> </ul> </li> <li><a href="personalroller.php"><img src="images/links/personalcigar.png" alt="Personal Cigar Roller" ></a></li> <li><a href="galleryentrance.php"><img src="images/links/photogallery.png" alt="Photo Gallery" ></a></li> <li><a href="contactus.php"><img src="images/links/contactus.png" alt="Contact Us" ></a></li> </ul></div></div><!--end banner-->

    Read the article

  • Loosely coupled .NET Cache Provider using Dependency Injection

    - by Rhames
    I have recently been reading the excellent book “Dependency Injection in .NET”, written by Mark Seemann. I do not generally buy software development related books, as I never seem to have the time to read them, but I have found the time to read Mark’s book, and it was time well spent I think. Reading the ideas around Dependency Injection made me realise that the Cache Provider code I wrote about earlier (see http://geekswithblogs.net/Rhames/archive/2011/01/10/using-the-asp.net-cache-to-cache-data-in-a-model.aspx) could be refactored to use Dependency Injection, which should produce cleaner code. The goals are to: Separate the cache provider implementation (using the ASP.NET data cache) from the consumers (loose coupling). This will also mean that the dependency on System.Web for the cache provider does not ripple down into the layers where it is being consumed (such as the domain layer). Provide a decorator pattern to allow a consumer of the cache provider to be implemented separately from the base consumer (i.e. if we have a base repository, we can decorate this with a caching version). Although I used the term repository, in reality the cache consumer could be just about anything. Use constructor injection to provide the Dependency Injection, with a suitable DI container (I use Castle Windsor). The sample code for this post is available on github, https://github.com/RobinHames/CacheProvider.git ICacheProvider In the sample code, the key interface is ICacheProvider, which is in the domain layer. 1: using System; 2: using System.Collections.Generic; 3:   4: namespace CacheDiSample.Domain 5: { 6: public interface ICacheProvider<T> 7: { 8: T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 9: IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry); 10: } 11: }   This interface contains two methods to retrieve data from the cache, either as a single instance or as an IEnumerable. the second paramerter is of type Func<T>. This is the method used to retrieve data if nothing is found in the cache. The ASP.NET implementation of the ICacheProvider interface needs to live in a project that has a reference to system.web, typically this will be the root UI project, or it could be a separate project. The key thing is that the domain or data access layers do not need system.web references adding to them. In my sample MVC application, the CacheProvider is implemented in the UI project, in a folder called “CacheProviders”: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Caching; 6: using CacheDiSample.Domain; 7:   8: namespace CacheDiSample.CacheProvider 9: { 10: public class CacheProvider<T> : ICacheProvider<T> 11: { 12: public T Fetch(string key, Func<T> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 13: { 14: return FetchAndCache<T>(key, retrieveData, absoluteExpiry, relativeExpiry); 15: } 16:   17: public IEnumerable<T> Fetch(string key, Func<IEnumerable<T>> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 18: { 19: return FetchAndCache<IEnumerable<T>>(key, retrieveData, absoluteExpiry, relativeExpiry); 20: } 21:   22: #region Helper Methods 23:   24: private U FetchAndCache<U>(string key, Func<U> retrieveData, DateTime? absoluteExpiry, TimeSpan? relativeExpiry) 25: { 26: U value; 27: if (!TryGetValue<U>(key, out value)) 28: { 29: value = retrieveData(); 30: if (!absoluteExpiry.HasValue) 31: absoluteExpiry = Cache.NoAbsoluteExpiration; 32:   33: if (!relativeExpiry.HasValue) 34: relativeExpiry = Cache.NoSlidingExpiration; 35:   36: HttpContext.Current.Cache.Insert(key, value, null, absoluteExpiry.Value, relativeExpiry.Value); 37: } 38: return value; 39: } 40:   41: private bool TryGetValue<U>(string key, out U value) 42: { 43: object cachedValue = HttpContext.Current.Cache.Get(key); 44: if (cachedValue == null) 45: { 46: value = default(U); 47: return false; 48: } 49: else 50: { 51: try 52: { 53: value = (U)cachedValue; 54: return true; 55: } 56: catch 57: { 58: value = default(U); 59: return false; 60: } 61: } 62: } 63:   64: #endregion 65:   66: } 67: }   The FetchAndCache helper method checks if the specified cache key exists, if it does not, the Func<U> retrieveData method is called, and the results are added to the cache. Using Castle Windsor to register the cache provider In the MVC UI project (my application root), Castle Windsor is used to register the CacheProvider implementation, using a Windsor Installer: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain; 6: using CacheDiSample.CacheProvider; 7:   8: namespace CacheDiSample.WindsorInstallers 9: { 10: public class CacheInstaller : IWindsorInstaller 11: { 12: public void Install(IWindsorContainer container, IConfigurationStore store) 13: { 14: container.Register( 15: Component.For(typeof(ICacheProvider<>)) 16: .ImplementedBy(typeof(CacheProvider<>)) 17: .LifestyleTransient()); 18: } 19: } 20: }   Note that the cache provider is registered as a open generic type. Consuming a Repository I have an existing couple of repository interfaces defined in my domain layer: IRepository.cs 1: using System; 2: using System.Collections.Generic; 3:   4: using CacheDiSample.Domain.Model; 5:   6: namespace CacheDiSample.Domain.Repositories 7: { 8: public interface IRepository<T> 9: where T : EntityBase 10: { 11: T GetById(int id); 12: IList<T> GetAll(); 13: } 14: }   IBlogRepository.cs 1: using System; 2: using CacheDiSample.Domain.Model; 3:   4: namespace CacheDiSample.Domain.Repositories 5: { 6: public interface IBlogRepository : IRepository<Blog> 7: { 8: Blog GetByName(string name); 9: } 10: }   These two repositories are implemented in the DataAccess layer, using Entity Framework to retrieve data (this is not important though). One important point is that in the BaseRepository implementation of IRepository, the methods are virtual. This will allow the decorator to override them. The BlogRepository is registered in a RepositoriesInstaller, again in the MVC UI project. 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8:   9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15: container.Register(Component.For<IBlogRepository>() 16: .ImplementedBy<BlogRepository>() 17: .LifestyleTransient() 18: .DependsOn(new 19: { 20: nameOrConnectionString = "BloggingContext" 21: })); 22: } 23: } 24: }   Now I can inject a dependency on the IBlogRepository into a consumer, such as a controller in my sample code: 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6:   7: using CacheDiSample.Domain.Repositories; 8: using CacheDiSample.Domain.Model; 9:   10: namespace CacheDiSample.Controllers 11: { 12: public class HomeController : Controller 13: { 14: private readonly IBlogRepository blogRepository; 15:   16: public HomeController(IBlogRepository blogRepository) 17: { 18: if (blogRepository == null) 19: throw new ArgumentNullException("blogRepository"); 20:   21: this.blogRepository = blogRepository; 22: } 23:   24: public ActionResult Index() 25: { 26: ViewBag.Message = "Welcome to ASP.NET MVC!"; 27:   28: var blogs = blogRepository.GetAll(); 29:   30: return View(new Models.HomeModel { Blogs = blogs }); 31: } 32:   33: public ActionResult About() 34: { 35: return View(); 36: } 37: } 38: }   Consuming the Cache Provider via a Decorator I used a Decorator pattern to consume the cache provider, this means my repositories follow the open/closed principle, as they do not require any modifications to implement the caching. It also means that my controllers do not have any knowledge of the caching taking place, as the DI container will simply inject the decorator instead of the root implementation of the repository. The first step is to implement a BlogRepository decorator, with the caching logic in it. Note that this can reside in the domain layer, as it does not require any knowledge of the data access methods. BlogRepositoryWithCaching.cs 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Text; 5:   6: using CacheDiSample.Domain.Model; 7: using CacheDiSample.Domain; 8: using CacheDiSample.Domain.Repositories; 9:   10: namespace CacheDiSample.Domain.CacheDecorators 11: { 12: public class BlogRepositoryWithCaching : IBlogRepository 13: { 14: // The generic cache provider, injected by DI 15: private ICacheProvider<Blog> cacheProvider; 16: // The decorated blog repository, injected by DI 17: private IBlogRepository parentBlogRepository; 18:   19: public BlogRepositoryWithCaching(IBlogRepository parentBlogRepository, ICacheProvider<Blog> cacheProvider) 20: { 21: if (parentBlogRepository == null) 22: throw new ArgumentNullException("parentBlogRepository"); 23:   24: this.parentBlogRepository = parentBlogRepository; 25:   26: if (cacheProvider == null) 27: throw new ArgumentNullException("cacheProvider"); 28:   29: this.cacheProvider = cacheProvider; 30: } 31:   32: public Blog GetByName(string name) 33: { 34: string key = string.Format("CacheDiSample.DataAccess.GetByName.{0}", name); 35: // hard code 5 minute expiry! 36: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 37: return cacheProvider.Fetch(key, () => 38: { 39: return parentBlogRepository.GetByName(name); 40: }, 41: null, relativeCacheExpiry); 42: } 43:   44: public Blog GetById(int id) 45: { 46: string key = string.Format("CacheDiSample.DataAccess.GetById.{0}", id); 47:   48: // hard code 5 minute expiry! 49: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 50: return cacheProvider.Fetch(key, () => 51: { 52: return parentBlogRepository.GetById(id); 53: }, 54: null, relativeCacheExpiry); 55: } 56:   57: public IList<Blog> GetAll() 58: { 59: string key = string.Format("CacheDiSample.DataAccess.GetAll"); 60:   61: // hard code 5 minute expiry! 62: TimeSpan relativeCacheExpiry = new TimeSpan(0, 5, 0); 63: return cacheProvider.Fetch(key, () => 64: { 65: return parentBlogRepository.GetAll(); 66: }, 67: null, relativeCacheExpiry) 68: .ToList(); 69: } 70: } 71: }   The key things in this caching repository are: I inject into the repository the ICacheProvider<Blog> implementation, via the constructor. This will make the cache provider functionality available to the repository. I inject the parent IBlogRepository implementation (which has the actual data access code), via the constructor. This will allow the methods implemented in the parent to be called if nothing is found in the cache. I override each of the methods implemented in the repository, including those implemented in the generic BaseRepository. Each override of these methods follows the same pattern. It makes a call to the CacheProvider.Fetch method, and passes in the parentBlogRepository implementation of the method as the retrieval method, to be used if nothing is present in the cache. Configuring the Caching Repository in the DI Container The final piece of the jigsaw is to tell Castle Windsor to use the BlogRepositoryWithCaching implementation of IBlogRepository, but to inject the actual Data Access implementation into this decorator. This is easily achieved by modifying the RepositoriesInstaller to use Windsor’s implicit decorator wiring: 1: using Castle.MicroKernel.Registration; 2: using Castle.MicroKernel.SubSystems.Configuration; 3: using Castle.Windsor; 4:   5: using CacheDiSample.Domain.CacheDecorators; 6: using CacheDiSample.Domain.Repositories; 7: using CacheDiSample.DataAccess; 8:   9: namespace CacheDiSample.WindsorInstallers 10: { 11: public class RepositoriesInstaller : IWindsorInstaller 12: { 13: public void Install(IWindsorContainer container, IConfigurationStore store) 14: { 15:   16: // Use Castle Windsor implicit wiring for the block repository decorator 17: // Register the outermost decorator first 18: container.Register(Component.For<IBlogRepository>() 19: .ImplementedBy<BlogRepositoryWithCaching>() 20: .LifestyleTransient()); 21: // Next register the IBlogRepository inmplementation to inject into the outer decorator 22: container.Register(Component.For<IBlogRepository>() 23: .ImplementedBy<BlogRepository>() 24: .LifestyleTransient() 25: .DependsOn(new 26: { 27: nameOrConnectionString = "BloggingContext" 28: })); 29: } 30: } 31: }   This is all that is needed. Now if the consumer of the repository makes a call to the repositories method, it will be routed via the caching mechanism. You can test this by stepping through the code, and seeing that the DataAccess.BlogRepository code is only called if there is no data in the cache, or this has expired. The next step is to add the SQL Cache Dependency support into this pattern, this will be a future post.

    Read the article

  • Simple XML variable returns "0"

    - by Warren Haskins
    Ok, so im working with tumblr's API and im using SimpleXMLElement with php and ive run into a problem. Basically, when I call on a variable it just prints a zero. for instance : <?php echo $data->posts->post[0]->photo-url[5]; ?> This just breaks the page, and when I leave out the [5] it just prints zero I want to echo the photo-url with the number [5] but I cant get my head around this and its killing me. I just dont understand why it wont work. Heres a sample of the simpleXMLElement print-out : SimpleXMLElement Object ( [@attributes] = Array ( [version] = 1.0 ) [posts] => SimpleXMLElement Object ( [@attributes] => Array ( [type] => photo ) [post] => Array ( [0] => SimpleXMLElement Object ( [@attributes] => Array ( [id] => 574166180 [url] => http://young-n-reckless.tumblr.com/post/574166180 [url-with-slug] => http://young-n-reckless.tumblr.com/post/574166180 [type] => photo [date-gmt] => 2010-05-05 19:52:46 GMT [date] => Wed, 05 May 2010 15:52:46 [unix-timestamp] => 1273089166 [format] => html [reblog-key] => vc9EfT7d [slug] => [tumblelog] => young-n-reckless [bookmarklet] => true ) [tumblelog] => SimpleXMLElement Object ( [@attributes] => Array ( [title] => Young & Reckless [name] => young-n-reckless [url] => http://young-n-reckless.tumblr.com/ [timezone] => US/Eastern [avatar-url-16] => http://24.media.tumblr.com/avatar_424f776dd55c_16.png [avatar-url-24] => http://24.media.tumblr.com/avatar_424f776dd55c_24.png [avatar-url-30] => http://24.media.tumblr.com/avatar_424f776dd55c_30.png [avatar-url-40] => http://25.media.tumblr.com/avatar_424f776dd55c_40.png [avatar-url-48] => http://24.media.tumblr.com/avatar_424f776dd55c_48.png [avatar-url-64] => http://26.media.tumblr.com/avatar_424f776dd55c_64.png [avatar-url-96] => http://25.media.tumblr.com/avatar_424f776dd55c_96.png [avatar-url-128] => http://24.media.tumblr.com/avatar_424f776dd55c_128.png [avatar-url-512] => http://29.media.tumblr.com/avatar_424f776dd55c_512.png ) ) [photo-link-url] => http://www.flickr.com/photos/katiemabey/3429588812/ [photo-url] => Array ( [0] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [1] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [2] => http://25.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_400.jpg [3] => http://28.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_250.jpg [4] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_100.jpg [5] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_75sq.jpg ) ) Any help would be greatly appreciated, and thanks in advance. Warren

    Read the article

  • GD! Converting a png image to jpeg and making the alpha by default white and not black.

    - by Shawn
    I tried something like this but it just makes the background of the image white, not necessarily the alpha of the image. I wanted to just upload everything as jpg's so if i could somehow "flatten" a png image with some transparently to default it to just be white so i can use it as a jpg instead. Appreciate any help. Thanks. $old = imagecreatefrompng($upload); $background = imagecolorallocate($old,255,255,255); imagefill($old, 0, 0, $background); imagealphablending($old, false); imagesavealpha($old, true);

    Read the article

  • How do I stop XNA/Visual Studio from rebuilding my content project every time I build?

    - by Phil Quinn
    My group and I are working on a game in XNA 4.0 with Visual Studio 2010/2012. The main solution has 6 projects: 2 XNA game projects (1 executable/ 1 class library), 1 WPF executable for the level editor, 2 standard class libraries, and a content project. Originally, the editor and engine XNA game projects had a content reference to separate content projects. Recently, I consolidated the content projects into one to simplify asset additions. Since pushing these changes to our git repo, certain members of my group have been experiencing weird build issues. Every time they run the project, they have to re-build all of the assets. This happens regardless of whether any changes were made, even if they just run the project directly after building. I've taken a few steps to figure out why this is happening. Below is the MSBuild output set on Normal verbosity. The seemingly important part is at 4, with the line 4> Rebuilding all content because build settings have changed 1>------ Build started: Project: Engine.Core, Configuration: Debug x86 ------ 1>Build started 11/29/2012 3:24:24 AM. 1>ResolveAssemblyReferences: 1> A TargetFramework profile exclusion list will be generated. 1>EmbedXnaFrameworkRuntimeProfile: 1>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 1>GenerateTargetFrameworkMonikerAttribute: 1>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 1>CoreCompile: 1>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 1>XnaWriteCacheFile: 1>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 1>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 1> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 1>_CopyAppConfigFile: 1>Skipping target "_CopyAppConfigFile" because all output files are up-to-date with respect to the input files. 1>CopyFilesToOutputDirectory: 1> Engine.Core -> <solution-dir>\src\Engine.Core\bin\x86\Debug\TimeSink.Engine.Core.dll 1> 1>Build succeeded. 1> 1>Time Elapsed 00:00:00.13 2>------ Build started: Project: TimeSink.Entities, Configuration: Debug x86 ------ 2>Build started 11/29/2012 3:24:25 AM. 2>ResolveAssemblyReferences: 2> A TargetFramework profile exclusion list will be generated. 2>EmbedXnaFrameworkRuntimeProfile: 2>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 2>GenerateTargetFrameworkMonikerAttribute: 2>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 2>CoreCompile: 2>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 2>XnaWriteCacheFile: 2>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 2>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 2> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 2>CopyFilesToOutputDirectory: 2> TimeSink.Entities -> <solution-dir>\src\TimeSink.Entities\bin\x86\Debug\TimeSink.Entities.dll 2> 2>Build succeeded. 2> 2>Time Elapsed 00:00:00.11 3>------ Build started: Project: Editor (Editor\Editor), Configuration: Debug x86 ------ 4>------ Build started: Project: Engine.Game, Configuration: Debug x86 ------ 3>Build started 11/29/2012 3:24:25 AM. 3>CoreCompile: 3> All content is already up to date 3>ResolveAssemblyReferences: 3> A TargetFramework profile exclusion list will be generated. 3>EmbedXnaFrameworkRuntimeProfile: 3>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 3>GenerateTargetFrameworkMonikerAttribute: 3>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 3>CoreCompile: 3>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 3>XnaWriteCacheFile: 3>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 3>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 3> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 3>_CopyOutOfDateNestedContentItemsToOutputDirectory: 3>Skipping target "_CopyOutOfDateNestedContentItemsToOutputDirectory" because all output files are up-to-date with respect to the input files. 3>CopyFilesToOutputDirectory: 3> Editor -> <solution-dir>\src\Editor\Editor\bin\x86\Debug\Editor.dll 3> 3>Build succeeded. 3> 3>Time Elapsed 00:00:00.39 4>Build started 11/29/2012 3:24:25 AM. 4>CoreCompile: 4> Rebuilding all content because build settings have changed 4> Building Textures\circle.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\circle.xnb 4> Importing Textures\circle.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\circle.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\circle.xnb 4> Building Textures\giroux.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\giroux.xnb 4> Importing Textures\giroux.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\giroux.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\giroux.xnb 4> Building Textures\Body_Neutral.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\Body_Neutral.xnb 4> Importing Textures\Body_Neutral.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\Body_Neutral.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\Body_Neutral.xnb 4> Building font.spritefont -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\font.xnb 4> Importing font.spritefont with Microsoft.Xna.Framework.Content.Pipeline.FontDescriptionImporter 4> Processing font.spritefont with Microsoft.Xna.Framework.Content.Pipeline.Processors.FontDescriptionProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\font.xnb 4>ResolveAssemblyReferences: 4> A TargetFramework profile exclusion list will be generated. 4>EmbedXnaFrameworkRuntimeProfile: 4>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 4>GenerateTargetFrameworkMonikerAttribute: 4>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 4>CoreCompile: 4>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 4>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 4> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 4>_CopyOutOfDateNestedContentItemsToOutputDirectory: 4>Skipping target "_CopyOutOfDateNestedContentItemsToOutputDirectory" because all output files are up-to-date with respect to the input files. 4>_CopyAppConfigFile: 4>Skipping target "_CopyAppConfigFile" because all output files are up-to-date with respect to the input files. 4>CopyFilesToOutputDirectory: 4> Engine.Game -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Engine.Game.exe 4>IncrementalClean: 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\circle.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\giroux.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Body_Neutral.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\font.xnb". 4> 4>Build succeeded. 4> 4>Time Elapsed 00:00:01.72 ========== Build: 4 succeeded, 0 failed, 1 up-to-date, 0 skipped ========== I can't think of how build settings could change between consecutive executions. Like I said, this only happens for half our group. One member is on a 32-bit Windows 7 Prof bootcamp partition on a Mac. Everyone else, including those who don't have the issue, are running straight 64-bit Windows 7 Prof. Both have tried using VS 2010 and VS 2012. Any insight would be greatly appreciated. Also, I can post more details upon request if this isn't thorough enough.

    Read the article

  • Confluence or apache on win server 2008 cant find scripts and images :(

    - by Ishak
    I am a newbie to both Tomcat and Apache. I have set the virtual hosts as described in Here. And JIRA works fine when i browse the URL jira.agmlab.com. However when i try to access Confluence(3.4.5) with confluence.agmlab.com the pages come in plain html, i can login and browse pages but there is no css or js so that my confluence pages look very ugly. what can possibly cause this and how to fix this? here is my virtual hosts definitions : # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost * # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *> ServerName confluence.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8081/confluence/ ProxyPassReverse / http://localhost:8081/confluence/ # ProxyHTMLURLMap /confluence/ / <Location /> Order allow,deny Allow from all </Location> </VirtualHost> <VirtualHost *> ServerName jira.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> and i added 127.0.0.1 jira.agmlab.com 127.0.0.1 confluence.agmlab.com to my hosts file (i am using Win Server 2008 OS). here is part of the error log from Apache access.log file : 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/resources/confluence.web.resources:aui-forms/confluence-forms.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/js/batch.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/confluence.web.resources:login/confluence.web.resources:login.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/css/batch.css?media=print HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/styles/combined.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.2.2/_/download/batch/com.atlassian.confluence.plugins.doctheme:splitter/com.atlassian.confluence.plugins.doctheme:splitter.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/legacy.confluence.web.resources:prototype/legacy.confluence.web.resources:prototype.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/opensearch/osd.action HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:16:27 +0200] "POST /plugins/servlet/gadgets/security-tokens HTTP/1.1" 200 525 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 I can see the pages properly with js and css and images when i use confluence with URL localhost:8081/confluence. i have just set the base url of confluence to "confluence.agmlab.com" and then restarted both confluence and apache but nothing changed, and i also checked settings for jira, and its base URL is localhost:8080 but it works fine. Can it be something related with the permissions defined in Win Server 2008 ? maybe there is not enough rights (such as read execute ) in some users, directories ??

    Read the article

  • Java update/install via group policy

    - by Maximus
    I trying to deploy the latest Java RE version via GP, Java 7 update 9. I want to update computers that are currently running an older version of Java, a mixture of 7.6 and 7.7, some computers are running versions as old as 6.31. Some are running a mixture of both. I would also like this GP to install Java if it's not installed. Previously I used push out Java updates to users machines as Java didn't remove the old version. So when it was done the user would restart their browser or pc to start using the latest version. Not the best way to manage it as it leaves the old version installed but it worked. I've created group policies before for printer deployment, log on drive mapping scripts, but never software deployment. I've extracted the Java MSI and created a transform file to suppress reboot etc using orca. As described on this site http://ivan.dretvic.com/2011/06/how-to-package-and-deploy-java-jre-1-6-0_26-via-group-policy/. I have also tried saving the edited MSI directly and that didn't work either. But it just won't deploy. I have tried to enable logging as suggested on this site http://openofficetechnology.com/node/32, GPO logging via UserEnvDebugLevel, Software deployment logging via AppmgmtDebugLevel and MSI logging, but there is no log C:\Windows\Debug\UserMode\userenv.log being created. The windows event viewer has the following errors: Error 24/10/2012 11:44:04 AM - "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1612" Information 24/10/2012 11:44:04 AM - "The removal of the assignment of application Java 7 Update 9 - FB Java Transform from policy JavaDeploy succeeded." Error 24/10/2012 11:44:04 AM - "The install of application Java 7 Update 9 - FB Java Transform from policy JavaDeploy failed. The error was : %%1612" There is a log created for MSI logging and it's as below. It says the source is invalid but it exists on the share and the PC that I'm testing has permissions and I've included the recommendation here Group Policy installation failed error 1274 to enable "Always wait for the network at computer startup and logon" === Verbose logging started: 24/10/2012 11:43:59 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\svchost.exe === MSI (c) (9C:EC) [11:43:59:898]: Resetting cached policy values MSI (c) (9C:EC) [11:43:59:898]: Machine policy value 'Debug' is 3 MSI (c) (9C:EC) [11:43:59:898]: ******* RunEngine: ******* Product: {26a24ae4-039d-4ca4-87b4-2f83217009ff} ******* Action: ******* CommandLine: ********** MSI (c) (9C:EC) [11:43:59:898]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (9C:EC) [11:43:59:898]: Grabbed execution mutex. MSI (c) (9C:EC) [11:44:03:431]: Cloaking enabled. MSI (c) (9C:EC) [11:44:03:431]: Attempting to enable all disabled privileges before calling Install on Server MSI (c) (9C:EC) [11:44:03:439]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (2C:70) [11:44:03:574]: Running installation inside multi-package transaction {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:70) [11:44:03:574]: Grabbed execution mutex. MSI (s) (2C:7C) [11:44:03:607]: Resetting cached policy values MSI (s) (2C:7C) [11:44:03:607]: Machine policy value 'Debug' is 3 MSI (s) (2C:7C) [11:44:03:607]: ******* RunEngine: ******* Product: {26a24ae4-039d-4ca4-87b4-2f83217009ff} ******* Action: ******* CommandLine: ********** MSI (s) (2C:7C) [11:44:03:607]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (2C:7C) [11:44:03:623]: User policy value 'SearchOrder' is 'nmu' MSI (s) (2C:7C) [11:44:03:624]: User policy value 'DisableMedia' is 0 MSI (s) (2C:7C) [11:44:03:624]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Looking for sourcelist for product {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Adding {26a24ae4-039d-4ca4-87b4-2f83217009ff}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Now checking product {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Media is enabled for product. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Processing net source list. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Trying source \\server\share\deployment\Java\stable\x32\. MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 2303 2: 5 3: \\server\share\ MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 1325 2: deployment MSI (s) (2C:7C) [11:44:03:650]: ConnectToSource: CreatePath/CreateFilePath failed with: -2147483648 1325 -2147483648 MSI (s) (2C:7C) [11:44:03:650]: ConnectToSource (con't): CreatePath/CreateFilePath failed with: -2147483648 -2147483648 MSI (s) (2C:7C) [11:44:03:650]: SOURCEMGMT: net source '\\server\share\deployment\Java\stable\x32\' is invalid. MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:03:650]: SOURCEMGMT: Processing media source list. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 2203 2: 3: -2147287037 MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Processing URL source list. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Failed to resolve source MSI (s) (2C:7C) [11:44:04:668]: MainEngineThread is returning 1612 MSI (s) (2C:70) [11:44:04:670]: User policy value 'DisableRollback' is 0 MSI (s) (2C:70) [11:44:04:670]: Machine policy value 'DisableRollback' is 0 MSI (s) (2C:70) [11:44:04:670]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (2C:70) [11:44:04:670]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 MSI (s) (2C:70) [11:44:04:671]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (s) (2C:70) [11:44:04:671]: Restoring environment variables MSI (c) (9C:EC) [11:44:04:675]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (9C:EC) [11:44:04:675]: MainEngineThread is returning 1612 === Verbose logging stopped: 24/10/2012 11:44:04 === I'm not sure what my next approach should be. Any help would be much appreciated. Thanks.

    Read the article

  • Linux servers going into Halt when pressing Control-D in putty or exit in the shell

    - by Itai Ganot
    Since today at noon, there's a number of Linux CentOS servers which are going to Halt whenever i type exit or use Control-D to close the putty window. Did anyone encounter this weird behavior before? I've checked the aliases list on the servers and there is no alias regarding halt command. After the server came online i've checked the history and saw a "logout" command there but nothing which is related to Halt. At first, i thought it happens only from my computer but later i realized that it happens to everyone which types exit, logout or control+d. 2 of these server are our main iptables firewalls and so it's super critical, your assistance is much appreciated. It looks like that, and it only happens on servers with active IPTables: [root@srv1 bin]# ssh srv2 root@srv2's password: Last login: Sun Nov 11 17:19:41 2012 from 192.168.12.98 [root@srv2 ~]# vim /etc/crontab [root@srv2 ~]# exit logout Broadcast message from root (pts/1) (Tue Nov 13 10:44:04 2012): The system is going down for system halt NOW! Connection to srv2 closed. [root@srv1 bin]# In my troubleshooting steps i came across the command strace, and so i've opened two bash windows to one of the problematic server and i used strace -p PID_of_bash. When i typed in exit in the first shell it did go to halt, attached is the strace output, if you can check it out and tell me if you see anything suspicious i'd be more than thankful. RER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 write(2, "There are stopped jobs.\n", 24) = 24 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23717 setpgid(23717, 23717) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23717]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23717 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da984, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, TIOCSWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT QUIT ALRM TSTP TTIN TTOU], [], 8) = 0 rt_sigaction(SIGINT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGWINCH, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "[root@g2-lga ~]# ", 17) = 17 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "e", 1) = 1 write(2, "e", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "x", 1) = 1 write(2, "x", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "i", 1) = 1 write(2, "i", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "t", 1) = 1 write(2, "t", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "\r", 1) = 1 write(2, "\n", 1) = 1 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig icanon echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 open("/root/.bash_logout", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=24, ...}) = 0 read(3, "# ~/.bash_logout\n\nclear\n", 24) = 24 close(3) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 stat(".", {st_mode=S_IFDIR|0750, st_size=12288, ...}) = 0 stat("/usr/kerberos/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/kerberos/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23726 setpgid(23726, 23726) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23726]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, Broadcast message from root (pts/0) (Wed Nov 14 12:41:44 2012): The system is going down for system halt NOW! [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23726 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da634, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 open("/etc/bash.bash_logout", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 stat("/root/.bash_history", {st_mode=S_IFREG|0600, st_size=28900, ...}) = 0 open("/root/.bash_history", O_WRONLY|O_APPEND) = 3 write(3, "cd /etc/profile.d/\nls\nls -alrt\ng"..., 1120) = 1120 close(3) = 0 open("/root/.bash_history", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0600, st_size=30020, ...}) = 0 read(3, "history \nping g1-lga\nping g1-lga"..., 30020) = 30020 close(3) = 0 open("/root/.bash_history", O_WRONLY|O_TRUNC) = 3 write(3, "grep \"216.18\" *\nhistory \nexit\nvi"..., 27609) = 27609 close(3) = 0 kill(4294965658, SIGTERM) = 0 kill(4294965658, SIGCONT) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, [{WIFSIGNALED(s) && WTERMSIG(s) == SIGTERM}], WNOHANG|WSTOPPED|WCONTINUED, NULL) = 1638 wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0x11) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0xffffffffffffffff) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 setpgid(0, 20458) = -1 EPERM (Operation not permitted) exit_group(1) = ? Process 20458 detached [root@g2-lga ~]#

    Read the article

  • Mac Server bizzare routing table

    - by The Unix Janitor
    My mac routing table usually is very simple. I know it's based on bsd , but what's it doing or trying to do. My routing table is usually very simple however, the second one, default was point to link5 ? Is this normal, or is this IPV6 craziness at work? Can somehelp me understand what OSX/BSD is doing? nternet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.254 UGSc 22 0 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 4 44102 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 6 0 en1 192.168.1.1 0:18:39:6d:89:c5 UHLWIi 0 0 en1 739 192.168.1.189 50:ea:d6:86:26:91 UHLWIi 0 0 en1 798 192.168.1.194 127.0.0.1 UHS 0 0 lo0 192.168.1.203 5c:95:ae:dd:34:8d UHLWIi 0 0 en1 316 192.168.1.253 a:76:ff:b5:51:79 UHLWIi 0 0 en1 911 192.168.1.254 8:76:ff:b5:51:79 UHLWIi 32 204 en1 1117 192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 7 en1 Internet6: Destination Gateway Flags Netif Expire ::1 link#1 UHL lo0 fe80::%lo0/64 fe80::1%lo0 UcI lo0 fe80::1%lo0 link#1 UHLI lo0 fe80::%en1/64 link#5 UCI en1 fe80::21b:63ff:fec7:c486%en1 0:1b:63:c7:c4:86 UHLI lo0 fe80::223:12ff:fe01:d7fe%en1 0:23:12:1:d7:fe UHLWIi en1 ff01::%lo0/32 fe80::1%lo0 UmCI lo0 ff01::%en1/32 link#5 UmCI en1 ff02::%lo0/32 fe80::1%lo0 UmCI lo0 ff02::%en1/32 link#5 UmCI en1 ----------------------------------- Bizzare routing table here Internet: Destination Gateway Flags Refs Use Netif Expire default link#5 UCS 113 0 en1 17.72.255.12 0:50:7f:5e:92:e2 UHLWIi 2 7 en1 1156 64.4.23.141 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1181 64.4.23.143 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 64.4.23.147 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 64.4.23.149 link#5 UHLWIi 0 1 en1 64.4.23.150 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1175 64.4.23.151 link#5 UHLWIi 0 1 en1 64.4.23.153 link#5 UHLWIi 0 1 en1 64.4.23.155 link#5 UHLWIi 0 1 en1 64.4.23.157 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1181 64.4.23.165 link#5 UHLWIi 0 2 en1 64.4.23.166 link#5 UHLWIi 0 1 en1 65.55.223.15 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1189 65.55.223.16 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 65.55.223.17 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1199 65.55.223.20 link#5 UHLWIi 0 1 en1 65.55.223.23 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 65.55.223.31 link#5 UHLWIi 0 1 en1 65.55.223.32 link#5 UHLWIi 0 1 en1 65.55.223.37 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1189 65.55.223.38 link#5 UHLWIi 0 1 en1 69.163.252.33 0:50:7f:5e:92:e2 UHLWIi 1 9 en1 1181 77.67.32.254 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1164 111.221.74.13 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1183 111.221.74.15 link#5 UHLWIi 0 1 en1 111.221.74.16 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 111.221.74.17 0:50:7f:5e:92:e2 UHLWIi 3 23 en1 1172 111.221.74.21 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 111.221.74.23 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 111.221.74.24 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1181 111.221.74.26 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 111.221.74.29 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1181 111.221.74.31 link#5 UHLWIi 0 1 en1 111.221.74.37 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1190 111.221.74.38 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 111.221.77.141 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1199 111.221.77.144 link#5 UHLWIi 0 1 en1 111.221.77.145 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1190 111.221.77.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 111.221.77.154 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 111.221.77.156 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1190 111.221.77.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 111.221.77.162 link#5 UHLWIi 0 1 en1 111.221.77.165 link#5 UHLWIi 0 1 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 4 40073 lo0 157.55.56.140 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1199 157.55.56.141 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.56.143 link#5 UHLWIi 0 1 en1 157.55.56.147 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 157.55.56.148 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 157.55.56.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 157.55.56.150 link#5 UHLWIi 0 1 en1 157.55.56.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 157.55.56.158 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1175 157.55.130.143 link#5 UHLWIi 0 1 en1 157.55.130.144 link#5 UHLWIi 0 1 en1 157.55.130.145 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1181 157.55.130.152 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1199 157.55.130.153 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 157.55.130.155 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1189 157.55.130.156 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1186 157.55.130.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 157.55.130.158 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1172 157.55.130.160 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 157.55.130.162 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1193 157.55.130.166 link#5 UHLWIi 0 1 en1 157.55.235.141 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1193 157.55.235.142 link#5 UHLWIi 1 1 en1 157.55.235.144 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 157.55.235.145 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 157.55.235.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.235.151 link#5 UHRLWIi 0 36 en1 157.55.235.152 0:50:7f:5e:92:e2 UHLWIi 3 21 en1 1189 157.55.235.153 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1178 157.55.235.156 link#5 UHLWIi 0 2 en1 157.55.235.157 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.235.158 link#5 UHLWIi 0 1 en1 157.55.235.159 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.55.235.162 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1183 157.55.235.166 0:50:7f:5e:92:e2 UHLWIi 0 25 en1 1181 157.56.52.14 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1181 157.56.52.15 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1183 157.56.52.16 link#5 UHLWIi 0 1 en1 157.56.52.17 0:50:7f:5e:92:e2 UHLWIi 3 14 en1 1199 157.56.52.19 link#5 UHLWIi 0 1 en1 157.56.52.20 0:50:7f:5e:92:e2 UHLWIi 3 17 en1 1199 157.56.52.22 0:50:7f:5e:92:e2 UHLWIi 0 24 en1 1181 157.56.52.25 link#5 UHLWIi 0 1 en1 157.56.52.28 link#5 UHLWIi 0 1 en1 157.56.52.29 link#5 UHLWIi 0 1 en1 157.56.52.31 link#5 UHLWIi 0 1 en1 157.56.52.33 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1189 169.254 link#5 UC 1 0 en1 169.254.174.250 127.0.0.1 UHS 1 0 lo0 169.254.255.255 ff:ff:ff:ff:ff:ff UHLWb 0 2 en1 193.88.6.19 link#5 UHLWIi 0 1 en1 194.165.188.82 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1166 195.46.253.211 link#5 UHLWIi 0 1 en1 204.9.163.143 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1178 213.199.179.141 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1172 213.199.179.142 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.143 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1166 213.199.179.146 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 213.199.179.147 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1164 213.199.179.148 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.149 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 213.199.179.150 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.151 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1164 213.199.179.153 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1166 213.199.179.157 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1167 213.199.179.160 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1165 213.199.179.161 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1172 213.199.179.162 0:50:7f:5e:92:e2 UHLWIi 0 2 en1 1163 213.199.179.165 0:50:7f:5e:92:e2 UHLWIi 0 1 en1 1164 213.199.179.166 0:50:7f:5e:92:e2 UHLWIi 0 3 en1 1164 224.0.0.251 1:0:5e:0:0:fc UHmLWI 0 0 en1 255.255.255.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 Internet6: Destination Gateway Flags Netif Expire ::1 link#1 UHL lo0 fe80::%lo0/64 fe80::1%lo0 UcI lo0 fe80::1%lo0 link#1 UHLI lo0 fe80::%en1/64 link#5 UCI en1 fe80::21b:63ff:fec7:c486%en1 0:1b:63:c7:c4:87 UHLI lo0 fe80::223:12ff:fe01:d7fe%en1 0:23:12:1:d7:ff UHLWIi en1 ff01::%lo0/32 fe80::1%lo0 UmCI lo0 ff01::%en1/32 link#5 UmCI en1 ff02::%lo0/32 fe80::1%lo0 UmCI lo0 ff02::%en1/32 link#5 UmCI en1

    Read the article

  • Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

    - by GriffJ
    Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

    Read the article

  • Linux server is only using 60% of memory, then swapping

    - by Kamil Kisiel
    I've got a Linux server that's running our bacula backup system. The machine is grinding like mad because it's going heavy in to swap. The problem is, it's only using 60% of its physical memory! Here's the output from free -m: free -m total used free shared buffers cached Mem: 3949 2356 1593 0 0 1 -/+ buffers/cache: 2354 1595 Swap: 7629 1804 5824 and some sample output from vmstat 1: procs -----------memory---------- ---swap-- -----io---- -system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 1843536 1634512 0 4188 54 13 2524 666 2 1 1 1 89 9 0 1 11 1845916 1640724 0 388 2700 4816 221880 4879 14409 170721 4 3 63 30 0 0 9 1846096 1643952 0 0 4956 756 174832 804 12357 159306 3 4 63 30 0 0 11 1846104 1643532 0 0 4916 540 174320 580 10609 139960 3 4 64 29 0 0 4 1846084 1640272 0 2336 4080 524 140408 548 9331 118287 3 4 63 30 0 0 8 1846104 1642096 0 1488 2940 432 102516 457 7023 82230 2 4 65 29 0 0 5 1846104 1642268 0 1276 3704 452 126520 452 9494 119612 3 5 65 27 0 3 12 1846104 1641528 0 328 6092 608 187776 636 8269 113059 4 3 64 29 0 2 2 1846084 1640960 0 724 5948 0 111480 0 7751 116370 4 4 63 29 0 0 4 1846100 1641484 0 404 4144 1476 125760 1500 10668 105358 2 3 71 25 0 0 13 1846104 1641932 0 0 5872 828 153808 840 10518 128447 3 4 70 22 0 0 8 1846096 1639172 0 3164 3556 556 74884 580 5082 65362 2 2 73 23 0 1 4 1846080 1638676 0 396 4512 28 50928 44 2672 38277 2 2 80 16 0 0 3 1846080 1628808 0 7132 2636 0 28004 8 1358 14090 0 1 78 20 0 0 2 1844728 1618552 0 11140 7680 0 12740 8 763 2245 0 0 82 18 0 0 2 1837764 1532056 0 101504 2952 0 95644 24 802 3817 0 1 87 12 0 0 11 1842092 1633324 0 4416 1748 10900 143144 11024 6279 134442 3 3 70 24 0 2 6 1846104 1642756 0 0 4768 468 78752 468 4672 60141 2 2 76 20 0 1 12 1846104 1640792 0 236 4752 440 140712 464 7614 99593 3 5 58 34 0 0 3 1846084 1630368 0 6316 5104 0 20336 0 1703 22424 1 1 72 26 0 2 17 1846104 1638332 0 3168 4080 1720 211960 1744 11977 155886 3 4 65 28 0 1 10 1846104 1640800 0 132 4488 556 126016 584 8016 106368 3 4 63 29 0 0 14 1846104 1639740 0 2248 3436 428 114188 452 7030 92418 3 3 59 35 0 1 6 1846096 1639504 0 1932 5500 436 141412 460 8261 112210 4 4 63 29 0 0 10 1846104 1640164 0 3052 4028 448 147684 472 7366 109554 4 4 61 30 0 0 10 1846100 1641040 0 2332 4952 632 147452 664 8767 118384 3 4 63 30 0 4 8 1846084 1641092 0 664 4948 276 152264 292 6448 98813 5 5 62 28 0 Furthermore, the output of top sorted by CPU time seems to support the theory that swap is what's bogging down the system: top - 09:05:32 up 37 days, 23:24, 1 user, load average: 9.75, 8.24, 7.12 Tasks: 173 total, 1 running, 172 sleeping, 0 stopped, 0 zombie Cpu(s): 1.6%us, 1.4%sy, 0.0%ni, 76.1%id, 20.6%wa, 0.1%hi, 0.2%si, 0.0%st Mem: 4044632k total, 2405628k used, 1639004k free, 0k buffers Swap: 7812492k total, 1851852k used, 5960640k free, 436k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 4174 root 17 0 63156 176 56 S 8 0.0 2138:52 35,38 bacula-fd 4185 root 17 0 63352 284 104 S 6 0.0 1709:25 28,29 bacula-sd 240 root 15 0 0 0 0 D 3 0.0 831:55.19 831:55 kswapd0 2852 root 10 -5 0 0 0 S 1 0.0 126:35.59 126:35 xfsbufd 2849 root 10 -5 0 0 0 S 0 0.0 119:50.94 119:50 xfsbufd 1364 root 10 -5 0 0 0 S 0 0.0 117:05.39 117:05 xfsbufd 21 root 10 -5 0 0 0 S 1 0.0 48:03.44 48:03 events/3 6940 postgres 16 0 43596 8 8 S 0 0.0 46:50.35 46:50 postmaster 1342 root 10 -5 0 0 0 S 0 0.0 23:14.34 23:14 xfsdatad/4 5415 root 17 0 1770m 108 48 S 0 0.0 15:03.74 15:03 bacula-dir 23 root 10 -5 0 0 0 S 0 0.0 13:09.71 13:09 events/5 5604 root 17 0 1216m 500 200 S 0 0.0 12:38.20 12:38 java 5552 root 16 0 1194m 580 248 S 0 0.0 11:58.00 11:58 java Here's the same sorted by virtual memory image size: top - 09:08:32 up 37 days, 23:27, 1 user, load average: 8.43, 8.26, 7.32 Tasks: 173 total, 1 running, 172 sleeping, 0 stopped, 0 zombie Cpu(s): 3.6%us, 3.4%sy, 0.0%ni, 62.2%id, 30.2%wa, 0.2%hi, 0.3%si, 0.0%st Mem: 4044632k total, 2404212k used, 1640420k free, 0k buffers Swap: 7812492k total, 1852548k used, 5959944k free, 100k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 5415 root 17 0 1770m 56 44 S 0 0.0 15:03.78 15:03 bacula-dir 5604 root 17 0 1216m 492 200 S 0 0.0 12:38.30 12:38 java 5552 root 16 0 1194m 476 200 S 0 0.0 11:58.20 11:58 java 4598 root 16 0 117m 44 44 S 0 0.0 0:13.37 0:13 eventmond 9614 gdm 16 0 93188 0 0 S 0 0.0 0:00.30 0:00 gdmgreeter 5527 root 17 0 78716 0 0 S 0 0.0 0:00.30 0:00 gdm 4185 root 17 0 63352 284 104 S 20 0.0 1709:52 28,29 bacula-sd 4174 root 17 0 63156 208 88 S 24 0.0 2139:25 35,39 bacula-fd 10849 postgres 18 0 54740 216 108 D 0 0.0 0:31.40 0:31 postmaster 6661 postgres 17 0 49432 0 0 S 0 0.0 0:03.50 0:03 postmaster 5507 root 15 0 47980 0 0 S 0 0.0 0:00.00 0:00 gdm 6940 postgres 16 0 43596 16 16 S 0 0.0 46:51.39 46:51 postmaster 5304 postgres 16 0 40580 132 88 S 0 0.0 6:21.79 6:21 postmaster 5301 postgres 17 0 40448 24 24 S 0 0.0 0:32.17 0:32 postmaster 11280 root 16 0 40288 28 28 S 0 0.0 0:00.11 0:00 sshd 5534 root 17 0 37580 0 0 S 0 0.0 0:56.18 0:56 X 30870 root 30 15 31668 28 28 S 0 0.0 1:13.38 1:13 snmpd 5305 postgres 17 0 30628 16 16 S 0 0.0 0:11.60 0:11 postmaster 27403 postfix 17 0 30248 0 0 S 0 0.0 0:02.76 0:02 qmgr 10815 postfix 15 0 30208 16 16 S 0 0.0 0:00.02 0:00 pickup 5306 postgres 16 0 29760 20 20 S 0 0.0 0:52.89 0:52 postmaster 5302 postgres 17 0 29628 64 32 S 0 0.0 1:00.64 1:00 postmaster I've tried tuning the swappiness kernel parameter to both high and low values, but nothing appears to change the behavior here. I'm at a loss to figure out what's going on. How can I find out what's causing this? Update: The system is a fully 64-bit system, so there should be no question of memory limitations due to 32-bit issues. Update2: As I mentioned in the original question, I've already tried tuning swappiness to all sorts of values, including 0. The result is always the same, with approximately 1.6 GB of memory remaining unused. Update3: Added top output to the above info.

    Read the article

  • No root file system is defined error after installation

    - by LearnCode
    I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

    Read the article

  • Ubuntu 12.04 + Wifi not working

    - by user171154
    i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

    Read the article

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • OS8- AK8- The bad news...

    - by Steve Tunstall
    Ok I told you I would give you the bad news of AK8 to go along with all the cool new stuff, so here it is. It's not that bad, really, just things you need to be aware of. First, the 2013.1 code is being called OS8, AK8 and 2013.1 by different people. I mean different people INSIDE Oracle!! It was supposed to be easy, but it never is. So for the rest of this blog entry, I'm calling it AK8. AK8 is not compatible with the 7x10 series. Ever. The 7x10 series is not supported with AK8, and if you try to upgrade one, it will fail at the healthcheck. All 7x20 series, all of them regardless of age, are supported with AK8. Drive trays. Let's talk about drive trays and SAS cards. The older drive trays for the 7x20 series were called the "Riverwalk 2" or "DS2" trays. They were technically the "J4410" series JBODs that Sun used to sell a la carte before we stopped selling JBODs. Don't get me started on that, it still makes me mad. We used these for many years, and you can still buy them right now until December 15th, 2013, when they will no longer be sold. The DS2 tray only came as a 4u, 24 drive shelf. It held 3.5" drives, and you had a choice of 2TB, 3TB, 300GB or 600GB drives. The SAS HBA in the 7x20 series was called a "Thebe" card, with a part # of 7105394. The 7420, for example, came standard with two of these "Thebe" cards for connecting to the disk trays. Two Thebe cards could handle up to 12 trays, so one would add two more cards to go to 24 trays, or have up to six Thebe cards to handle 36 trays. This card was for external SAS only. It did not connect to the internal OS drives or the Readzillas, both of which used the internal SCSI controller of the server. These Riverwalk 2 trays ARE supported with AK8. You can upgrade your older 7420 or 7320, no problem, as-is. The much older Riverwalk 1 trays or J4400 trays are NOT supported by AK8. However, they were only used by the 7x10 series, and we already said that the 7x10 series was not supported. Here's where it gets tricky. Since last January, we have been selling the new style disk trays. We call them the "DE2-24P" and the "DE2-24C" trays. The "C" tray is for capacity drives, which are 3.5" 3TB or 4TB drives. The "P" trays are for performance drives, which are 2.5" 300GB and 900GB drives. These trays are NOT Riverwalk 2 trays, even though the "C" series may kind of look like it. Different manufacturer and different firmware. They are not new. Like I said, we've been selling them with the 7x20 series since last January. They are the only disk trays we will be selling going forward. Of course, AK8 supports them. So what's the problem? The problem is going to be for people who have to mix drive trays. Remember, your older 7x20 series has Thebe SAS2 HBAs. These have 2 SAS ports per card.  The new ZS3-2 and ZS3-4 systems, however, have the new "Thebe2" SAS2 HBAs. These Thebe2 cards have 4 ports per card. This is very cool, as we can now do more SAS channels with less cards. Instead of needing 4 SAS cards to grow to 24 trays like we did with the old Thebe cards, I can now do 24 trays with only 2 Thebe2 cards. This means more IO slots for fun things like Infiniband and 10G. So far, so good, right? These Thebe2 cards work with any disk tray. You can even mix older DS2 trays with the newer DE2 trays in the same system, as long as you have Thebe2 cards. Ah, there's your problem. You don't have Thebe2 cards in your old 7420, do you? Well, I told you the bad news wasn't that bad, right? We can take out your Thebe cards and replace them with Thebe2. You can then plug your older DS2 trays right back in, and also now get newer DE2 trays going forward. However, it's important that the trays are on different SAS channels. You can mix them in the same system, but not on the same channel. Ask your local SC if you need help with the new cable layout. By the way, the new ZS3-2 and ZS3-4 systems also include a new IO card called "Erie" cards. These are for INTERNAL SAS to the OS drives and the Readzillas. So those are now SAS2 instead of SATA like the older models. Yes, the Erie card uses an IO slot, but that's OK, because the Thebe2 cards allow us to use less SAS HBAs to grow the system, right? That's it. Not too much bad news and really not that bad. AK8 does not support the 7x10 series, and you may need new Thebe2 cards in your older systems if you want to add on newer DE2 trays. I think we can all agree that there are worse things out there. Like our Congress.   Next up.... More good news and cool AK8 tricks. Such as virtual NICS. 

    Read the article

  • Box2D blocky map. Body, Fixtures a huge map and performance

    - by Solom
    Right now I'm still in the planning phase of a my very first game. I'm creating a "Minecraft"-like game in 2D that features blocks that can be destroyed as well as players moving around the map. For creating the map I chose a 2D-Array of Integers that represent the Block ID. For testing purposes I created a huge map (16348 * 256) and in my prototype that didn't use Box2D everything worked like a charm. I only rendered those blocks that where within the bounds of my camera and got 60 fps straight. The problem started when I decided to use an existing physics-solution rather than implementing my own one. What I had was basically simple hitboxes around the blocks and then I had to manually check if the player collided with any of those in his neighborhood. For more advanced physics as well as the collision detection I want to switch over to Box2D. The problem I have right now is ... how to go about the bodies? I mean, the blocks are of a static bodytype. They don't move on their own, they just are there to be collided with. But as far as I can see it, every block needs his own body with a rectangular fixture attached to it, so as to be destroyable. But for a huge map such as mine, this turns out to be a real performance bottle-neck. (In fact even a rather small map [compared to the other] of 1024*256 is unplayable.) I mean I create thousands of thousands of blocks. Even if I just render those that are in my immediate neighborhood there are hundreds of them and (at least with the debugRenderer) I drop to 1 fps really quickly (on my own "monster machine"). I thought about strategies like creating just one body, attaching multiple fixtures and only if a fixture got hit, separate it from the body, create a new one and destroy it, but this didn't turn out quite as successful as hoped. (In fact the core just dumps. Ah hello C! I really missed you :X) Here is the code: public class Box2DGameScreen implements Screen { private World world; private Box2DDebugRenderer debugRenderer; private OrthographicCamera camera; private final float TIMESTEP = 1 / 60f; // 1/60 of a second -> 1 frame per second private final int VELOCITYITERATIONS = 8; private final int POSITIONITERATIONS = 3; private Map map; private BodyDef blockBodyDef; private FixtureDef blockFixtureDef; private BodyDef groundDef; private Body ground; private PolygonShape rectangleShape; @Override public void show() { world = new World(new Vector2(0, -9.81f), true); debugRenderer = new Box2DDebugRenderer(); camera = new OrthographicCamera(); // Pixel:Meter = 16:1 // Body definition BodyDef ballDef = new BodyDef(); ballDef.type = BodyDef.BodyType.DynamicBody; ballDef.position.set(0, 1); // Fixture definition FixtureDef ballFixtureDef = new FixtureDef(); ballFixtureDef.shape = new CircleShape(); ballFixtureDef.shape.setRadius(.5f); // 0,5 meter ballFixtureDef.restitution = 0.75f; // between 0 (not jumping up at all) and 1 (jumping up the same amount as it fell down) ballFixtureDef.density = 2.5f; // kg / m² ballFixtureDef.friction = 0.25f; // between 0 (sliding like ice) and 1 (not sliding) // world.createBody(ballDef).createFixture(ballFixtureDef); groundDef = new BodyDef(); groundDef.type = BodyDef.BodyType.StaticBody; groundDef.position.set(0, 0); ground = world.createBody(groundDef); this.map = new Map(20, 20); rectangleShape = new PolygonShape(); // rectangleShape.setAsBox(1, 1); blockFixtureDef = new FixtureDef(); // blockFixtureDef.shape = rectangleShape; blockFixtureDef.restitution = 0.1f; blockFixtureDef.density = 10f; blockFixtureDef.friction = 0.9f; } @Override public void render(float delta) { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); debugRenderer.render(world, camera.combined); drawMap(); world.step(TIMESTEP, VELOCITYITERATIONS, POSITIONITERATIONS); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { /* if(camera.position.y - (camera.viewportHeight/2) > a) continue; if(camera.position.y - (camera.viewportHeight/2) < a) break; */ for(int b = 0; b < map.getWidth(); b++) { /* if(camera.position.x - (camera.viewportWidth/2) > b) continue; if(camera.position.x - (camera.viewportWidth/2) < b) break; */ /* blockBodyDef = new BodyDef(); blockBodyDef.type = BodyDef.BodyType.StaticBody; blockBodyDef.position.set(b, a); world.createBody(blockBodyDef).createFixture(blockFixtureDef); */ PolygonShape rectangleShape = new PolygonShape(); rectangleShape.setAsBox(1, 1, new Vector2(b, a), 0); blockFixtureDef.shape = rectangleShape; ground.createFixture(blockFixtureDef); rectangleShape.dispose(); } } } @Override public void resize(int width, int height) { camera.viewportWidth = width / 16; camera.viewportHeight = height / 16; camera.update(); } @Override public void hide() { dispose(); } @Override public void pause() { } @Override public void resume() { } @Override public void dispose() { world.dispose(); debugRenderer.dispose(); } } As you can see I'm facing multiple problems here. I'm not quite sure how to check for the bounds but also if the map is bigger than 24*24 like 1024*256 Java just crashes -.-. And with 24*24 I get like 9 fps. So I'm doing something really terrible here, it seems and I assume that there most be a (much more performant) way, even with Box2D's awesome physics. Any other ideas? Thanks in advance!

    Read the article

  • Vlc And other Multi Media Problems

    - by MrMagu
    ive tried numerous Free Multimedia Programs on ubuntu and i get the same result when i go to watch one of my movies off my other hardrive it allways ends up full screening with a stuck image in the middle and vlc ends up looking pitch black. ive look all over the web for this issue im wondering if anyone is experinceing the same problems I Dont know if it has to do with the duel monitors ive tried adding and re adding the repositorys but it seems to be doing the same repetive thing for over a month now do i need to reinstall the whole system or what idk anyhelp please would be much appreciated Ty MrMagu Xorg Conf File nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 304.37 (buildd@allspice) Sun Sep 9 05:59:26 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: 1920x1080 +1920+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: 1920x1080 +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-1: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Pictures http://tinypic.com/r/34o7j1h/6 http://tinypic.com/r/3rn20/6 Ty so Much Mr Magu

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >