Search Results

Search found 2403 results on 97 pages for 'snatch 02'.

Page 54/97 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• cpufreq not available 11.10

  - by code shogan

  on 11.04 I had cpufreq working on my "AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02" processors, however now on oneiric cpufreq won't load. The core temperature of my cpu is normally 40 c, but lately it's cooking away at 75-80+ c and the fan is always extremely loud even when cpu usage has at 0.4%. and after this dmesg | grep -i cpu I got: Brought up 2 CPUs Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU0 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 ACPI: acpi_idle registered with cpuidle cpufreq-nforce2: No nForce2 chipset. cpuidle: using governor ladder cpuidle: using governor menu powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 (2 cpu cores) (version 2.20.00) I see something about governors and ladder there, does this mean the OS is able to scale my cpu's or not? If so is there a way I can determine it's working? I saw that for other users that the wrong module had been loaded and by disabling it they were able to get cpufreq loaded. How can I tell what scaling module is loaded? stats: Ubuntu Oneiric 32bit Dell Inspiron 1501

  Read the article

• dell vostro 1000 broadcom wireless connection

  - by lorrenuy

  I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• Materialized View does not import properly when importing on a second instance of a database

  - by marinus

  When I import a database with materialized view mv_mt in just one database (Oracle) everything is ok. create materialized view mv_mt refresh complete next trunc( sysdate ) + 1 as SELECT sysdate, media_type.* from media_type; But when I try to import the same database to a copy in another schema I get the following errors: IMP-00017: following statement failed with ORACLE error 1: "BEGIN DBMS_JOB.ISUBMIT(JOB=438,WHAT='dbms_refresh.refresh(''"ALEXANDRA"" "."MV_MT"'');',NEXT_DATE=TO_DATE('2012-07-02:14:22:36','YYYY-MM-DD:HH24:MI:" "SS'),INTERVAL='sysdate + 1 / 24 / 60 / 6 ',NO_PARSE=TRUE); END;" IMP-00003: ORACLE error 1 encountered ORA-00001: unique constraint (SYS.I_JOB_JOB) violated ORA-06512: at "SYS.DBMS_JOB", line 100 ORA-06512: at line 1 IMP-00017: following statement failed with ORACLE error 23421: "BEGIN dbms_refresh.make('"ALEXANDRA"."MV_MT"',list=null,next_date=null," "interval=null,implicit_destroy=TRUE,lax=FALSE,job=438,rollback_seg=NUL" "L,push_deferred_rpc=TRUE,refresh_after_errors=FALSE,purge_option = 1,par" "allelism = 0,heap_size = 0); END;" IMP-00003: ORACLE error 23421 encountered ORA-23421: job number 438 is not a job in the job queue ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86 ORA-06512: at "SYS.DBMS_IJOB", line 793 ORA-06512: at "SYS.DBMS_REFRESH", line 86 ORA-06512: at "SYS.DBMS_REFRESH", line 62 ORA-06512: at line 1 IMP-00017: following statement failed with ORACLE error 23410: "BEGIN dbms_refresh.add(name='"ALEXANDRA"."MV_MT"',list='"ALEXANDRA"."MV" "_MT"',siteid=0,export_db='ORCL01'); END;" IMP-00003: ORACLE error 23410 encountered ORA-23410: materialized view "ALEXANDRA"."MV_MT" is already in a refresh group ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95 ORA-06512: at "SYS.DBMS_IREFRESH", line 484 ORA-06512: at "SYS.DBMS_REFRESH", line 140 ORA-06512: at "SYS.DBMS_REFRESH", line 125 ORA-06512: at line 1 Anyone any ideas? Regards, Marinus

  Read the article

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• What could be causing frequent display freezes?

  - by austen

  I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

  Read the article

• HP Envy 15 3040nr sound issues

  - by Lenny

  I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

  Read the article

• Dark screen when wake / Unable to control screen brightness

  - by John

  Running Ubuntu 11.04 on Lenovo ThinkPad with an Nvida graphics card. The unit goes to sleep when the lid is shut. (The unit goes to suspend mode (not to disk/hibernate), AC gets turned off, running on battery) Upon lid-open sometimes the screen is almost too dark to read. I'm really not sure of the exact cause, (very low batt??). The only fix is a reboot. The screen brightness buttons have never worked in Ubuntu. I have messed w/ the power management preferences. No change. At one point I messed w/ the gnome settings. No change. I have tried a few cmds: echo 9>/sys/class/backlight/acpi_video0/brightness setpci -s 00:02.0 F4.B=10 xgamma -gamma .75 None of these help. Most have zero effect. I think it is and acpi thing, but that is just a guess. I'm out of idea's, and looking for suggestions. Thanks

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• CodePlex Daily Summary for Tuesday, August 05, 2014

  CodePlex Daily Summary for Tuesday, August 05, 2014Popular ReleasesGMare: GMare Beta 1.3: Fixed: Sprites not being read inLib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.4.2: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...Aitso-a platform for spatial optimization and based on artificial immune systems: Aitso_0.14.08.01: Aitso0.14.08.01Installer.zipVidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.EasyMR: v1.0: 1 ????????? 2 ????????? 3 ??????? ????????????????????，???????????????，???????????PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.5: *Added Send-Keys function to send a sequence of keys to an application window (Thanks to mmashwani) *Added 3 optimization/stability improvements to Execute-Process following MS best practice (Thanks to mmashwani) *Fixed issue where Execute-MSI did not use value from XML file for uninstall but instead ran all uninstalls silently by default *Fixed error on 1641 exit code (should be a success like 3010) *Fixed issue with error handling in Invoke-SCCMTask *Fixed issue with deferral dates where th...Facebook Graph Toolkit: Facebook Graph Toolkit 5.0.493: updated to Graph Api v2.0 updated class definitions according to latest documentation fixed a potential memory leak causing socket exhaustion LINQ to FQL simplified usage performance improvement added missing constructorsCrashReporter.NET : Exception reporting library for C# and VB.NET: CrashReporter.NET 1.4: Added French, Italian, German, Russian and Spanish translation. Added DeveloperMessage field so developers can send value of variables or other details they want along with crash report. Fixed bug where subject of crash report email was affected by translation. Fixed bug where extension is not added in SaveFileDialog while saving crash report.AutoUpdater.NET : Auto update library for VB.NET and C# Developer: AutoUpdater.NET 1.3: Fixed problem in DownloadUpdateDialog where download continues even if you close the dialog. Added support for new url field for 64 bit application setup. AutoUpdater.NET will decide which download url to use by looking at the value of IntPtr.Size. Added German translation provided by Rene Kannegiesser. Now developer can handle update logic herself using event suggested by ricorx7. Added italian translation provided by Gianluca Mariani. Fixed bug that prevents Application from exiti...Windows Embedded Board Support Package for BeagleBone: WEC2013 Beaglebone Black 03.02.00: Demo image. Runs on BeagleBone White and Black. On BeagleBone Black works with uSD or eMMC based images. XAML support added. SDK and demo tests included. New SDK refresh (uninstall old version first) IoT M2MQTT client built in. Built and maintained in the U.S.A.!Essence#: Philemon-3 (Alpha Build 19): The Philemon-3 release corrects a problem with the script of the NSIS installation program generator used to build the installer for the previous release. That issue could have been addressed by simply fixing the script and then regenerating the installation program, but a) it was judged to be less work to create a new release based on the current development code, and b) a new release does a better job of communicating the fact that the installation program for the previous release is broken...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Continuous Affect Rating and Media Annotation: CARMA v6.02: Compiled as v6.02 for MCR 8.3 (2014a) 32-bit Windows version Ratings will now only be saved for full seconds (e.g., a 90.2s video will now yield 90 ratings instead of 91 ratings). This should be more transparent to users and ensure consistency in the number of ratings output by different computers. Separated the XLS and XLSX output formats in the save file drop-down box. This should be more transparent to users than having to add the appropriate extension.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.Wallpapr: Wallpapr 1.7: Fixed the "Prohibited" message (Flickr upgraded their API to SSL-only).DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).New ProjectsAPS - Folha de Pagamento: Folha de PagamentoCIS470 Metrics Tracking: A data driven application designed to display various project progress metrics and reports based off of data. CIS470 Metrics Tracking DeVry Capstone project.Excel Converter: A great tools to convert MS excel to PDF and vice verse. We plan support both Window and Web version.FreightSoft: A Web Based Shipping and Freight Management SystemGoogle .Net API: Dot Net warp for Google API Services. API Demo, documentation, simple useful tools. Welcome to join us make more google API works on Dot Net World. Google Driver downloader: A free tool to bulk download file from google driver to local box.Omniprogram: OmniprogramOnline OCR: A free to OCR via google APIOnline Resume Parsing Using Aspose.Words for .NET: Online Resume Parsing Using Aspose.Words for .NET. PDF Text Searcher: This application searches for a word from the PDF file name inside the PDF itself.PEIN Framework: A collection of day to day required libraries.Public Components: Public Components, by Danny VarodRole Based View for Microsoft Dynamic CRM 2011 & 2013: Allow admin to configure entity's view based on role.scmactivitytfs: Test project to play with Team Foundation Server.Selfpub.CrmSolution: Tram-pam-pamWindGE: WindGE????DirectX11??????3D???????，????????????????????，???WPF???????。yao's project: a project for personal study

  Read the article

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

• How to get my laptop to detect SD cards inserted into its built-in card reader?

  - by Candelight

  My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• Cannot establish Wired connection on Acer Aspire 5930G

  - by drakos46

  I use an Acer Aspire 5930G, dual booted with Windows 7 and Ubuntu 13.10. My problem is that i cannot establish wired connection on my ubuntu. Wireless connection works in both of my OSs but the Wired connection does not, only on the Ubuntu. I have already tried the common fix: echo on | sudo tee /sys/class/net/eth0/device/power/control but without any results. Any ideas? eth0 Link encap:Ethernet HWaddr 00:1d:72:c2:21:a5 inet6 addr: fe80::21d:72ff:fec2:21a5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:945 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:204318 (204.3 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:7241 errors:0 dropped:0 overruns:0 frame:0 TX packets:7241 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:645874 (645.8 KB) TX bytes:645874 (645.8 KB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:57:7b:cc inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::216:eaff:fe57:7bcc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19937 errors:0 dropped:0 overruns:0 frame:0 TX packets:16933 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10877245 (10.8 MB) TX bytes:3131378 (3.1 MB) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)

  Read the article

• Struggles to connect to network when using WPA with a BCM43225

  - by pst007x

  When booting my laptop, it will try to connect to my wireless network, however a window keeps popping up asking me for my security password, which has already been saved. I have to keep deleting my network settings, and reconnecting, otherwise it keeps failing to connect. My wireless is set up with a WPA, I do not want to lower my security because of this, but it is a pain and can take me 15mins plus to finally connect. The problem has only become apparent since a fresh install of 11.10. IPV6 disabled. System info: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) Subsystem: Acer Incorporated [ALI] Device 036d Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at b3400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) Subsystem: Broadcom Corporation Device 04da Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: wl, brcmsmac ADDITIONAL: In terminal I get this: pst007x@pst007x-ubuntu64:~$ nm-applet start ** Message: applet now removed from the notification area ** (nm-applet:2816): DEBUG: old state indicates that this was not a disconnect 0 ** Message: using fallback from indicator to GtkStatusIcon ** Message: applet now embedded in the notification area ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. ** (nm-applet:2816): DEBUG: foo_client_state_changed_cb Note this line: ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. At this point is where I am asked for the password. Please report WPA issues with Ubuntu 11.10 here: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/892727

  Read the article

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• The premier support for Sun Cluster 3.1 ended

  - by JuergenS

  In October 2011 the premier support for Sun Cluster 3.1 ended. See details in Oracle Lifetime Support Policy for Oracle and Sun System Software document. There no 'Extended Support' and the 'Sustaining Support Ends' is indefinite. But for indefinite 'Sustaining Support' I like to point out from the mentioned document (version Sept. 2011) on page 5: Sustaining Support does NOT include: * New program updates, fixes, security alerts, general maintenance releases, selected functionality releases and documentation updates or upgrade tools * Certification with most new third-party products/versions and most new Oracle products * 24 hour commitment and response guidelines for Severity 1 service requests *Previously released fixes or updates that Oracle no longer supports This means Solaris 10 9/10 update9 is the last qualified release for Sun Cluster 3.1. So, Sun Cluster 3.1 is not qualified on Solaris 10 8/11 Update10. Furthermore there is an issue around with SVM patch 145899-06 or higher. This SVM patch is part of Solaris 10 8/11 Update10. The 145899-06 is the first released patch of this number, therefore the support for Sun Cluster 3.1 ends with the previous SVM patches 144622-01 and 139967-02. For details about the known problem with SVM patch 145899-06 please refer to doc 1378828.1. Further this means you should freeze (no patching, no upgrade) your Sun Cluster 3.1 configuration not later than Solaris 10 9/10 update9. Or even better plan an upgrade to Solaris Cluster 3.3 now to get back to full support.

  Read the article

• Is a disk/ata timeout exception dangerous?

  - by j-g-faustus

  I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

  Read the article

• Ubuntu openGL issues

  - by Dank101

  my OpenGL doesn't work at all i get Xlib: extension "GLX" missing on display ":0". lspci output 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1246] (rev a1) (prog-if 00 [VGA controller]) dmesg | grep -i nvid [ 9.469068] nvidia: module license 'NVIDIA' taints kernel. [ 9.538786] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538792] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538796] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.538803] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.538809] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.538942] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.48 Sun Sep 9 [10300.955799] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10300.955803] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfff80000) [10300.955807] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001) [10300.955811] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xd000000c) [10300.955814] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [10300.955817] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [10300.955820] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x10) [10300.955823] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100007) my computer is a dell XPS l702x

  Read the article

• USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800

  - by poolie

  Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick. When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show: PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) pm_op(): usb_dev_suspend+0x0/0x20 returns -2 PM: Device usb8 failed to suspend async: error -2 PM: Some devices failed to suspend PM: resume of devices complete after 0.430 msecs PM: resume devices took 0.000 seconds PM: Finishing wakeup. Restarting tasks ... done. PM: Syncing filesystems ... I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and lspci shows the physical devices are: 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) Booting with no_console_suspend makes no difference.

  Read the article

• Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

  - by Tim

  I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

  Read the article

• Touchpad right click doesn't work on HP Envy 14 beats

  - by jdrageme01

  I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

  Read the article

• Controlling access to site folders if you cannot user Roles

  - by DavidMadden

  I find myself on an assignment where I could not use System.Web.Security.Roles.  That meant that I could not use Visual Studio's Website | ASP.NET Configuration.  I had to go about things another way.  The clues were in these two websites:http://www.csharpaspnetarticles.com/2009/02/formsauthentication-ticket-roles-aspnet.htmlhttp://msdn.microsoft.com/en-us/library/b6x6shw7(v=VS.71).aspxhttp://msdn.microsoft.com/en-us/library/b6x6shw7(v=VS.71).aspxYou can set in your web.config the restrictions on folders without having to set the restrictions in multiple folders through their own web.config file.  In my main default.aspx file in my protected subfolder off my main site, I did the following code due to MultiFormAuthentication (MFA) providing the security to this point:        string role = string.Empty;         if (((Login)Session["Login"]).UserLevelID > 3)         {             role = "PowerUser";         }         else         {             role = "Newbie";         }         FormsAuthenticationTicket ticket =  new FormsAuthenticationTicket( 1,                 ((Login)Session["Login"]).UserID,                 DateTime.Now,                 DateTime.Now.AddMinutes(20),                 false,                 role,                 FormsAuthentication.FormsCookiePath);         string hashCookies = FormsAuthentication.Encrypt(ticket);         HttpCookie cookie =  new HttpCookie(FormsAuthentication.FormsCookieName, hashCookies);         Response.Cookies.Add(cookie); This all gave me the ability to change restrictions on folders without having to restart the website or having to do any hard coding.

  Read the article

• pppoe connection to dsl model

  - by VJo

  Hello, I am connecting to the internet through a pppoe connection, but for some reason I can not connect to my modem (it's address is 192.168.1.1). Before I set my pppoe connection, I could connect. So, is there a way? EDIT The output of ifconfig is : r@PlaviZec:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:13:d4:f7:02:d4 inet6 addr: fe80::213:d4ff:fef7:2d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2811 errors:0 dropped:0 overruns:0 frame:0 TX packets:2801 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2538831 (2.5 MB) TX bytes:448591 (448.5 KB) Interrupt:21 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1600 (1.6 KB) TX bytes:1600 (1.6 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:92.229.42.177 P-t-P:213.191.64.59 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:2794 errors:0 dropped:0 overruns:0 frame:0 TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2476277 (2.4 MB) TX bytes:381240 (381.2 KB)

  Read the article

• Correct nvidia+intel graphics setup in 14.04

  - by Espressofa

  Just upgraded to 14.04 to try to fix some other issues. Now, something has gone wrong with my graphics. I have a Thinkpad T530 with Intel and Nvidia graphics cards. $ inxi -SGx System: Host: xyz Kernel: 3.13.0-24-generic x86_64 (64 bit, gcc: 4.8.2) Desktop: N/A Distro: Ubuntu 14.04 trusty Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 Card-2: NVIDIA GF108M [NVS 5400M] bus-ID: 01:00.0 X.Org: 1.15.1 drivers: fbdev,vesa,intel,nouveau (unloaded: nvidia) Resolution: [email protected] GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". I'm not sure what I did but now something is wrong with my graphics, as should be visible from the above commands. nvidia-detector says "none" as well. I used to have bumblebee but then some website said to remove it and now something's clearly wrong. What's the right way to set things up? Should I try to add bumblebee back? Here's what's installed now: $ dpkg --get-selections | grep nvidia nvidia-319 install nvidia-331 install nvidia-libopencl1-331 install nvidia-opencl-icd-331 install nvidia-prime install nvidia-settings install nvidia-settings-319 install

  Read the article

• ArchBeat Link-o-Rama for 2012-04-12

  - by Bob Rhubart

  2012 Real World Performance Tour Dates |Performance Tuning | Performance Engineering www.ioug.org Coming to your town: a full day of real world database performance with Tom Kyte, Andrew Holdsworth, and Graham Wood. Rochester, NY - March 8 Los Angeles, CA - April 30 Orange County, CA - May 1 Redwood Shores, CA - May 3 Oracle Technology Network Developer Day: MySQL - New York www.oracle.com Wednesday, May 02, 2012 8:00 AM – 4:30 PM Grand Hyatt New York 109 East 42nd Street, Grand Central Terminal New York, NY 10017 Webcast Series: Data Warehousing Best Practices event.on24.com April 19, 2012 - Best Practices for Workload Management of a Data Warehouse on Oracle Exadata May 10, 2012 - Best Practices for Extreme Data Warehouse Performance on Oracle Exadata Webcast: Untangle Your Business with Oracle Unified SOA and Data Integration event.on24.com Date: Tuesday, April 24, 2012 Time: 10:00 AM PT / 1:00 PM ET Speakers: Mala Narasimharajan - Senior Product Marketing Manager, Oracle Data Integration, Oracle Bruce Tierney - Director of Product Marketing, Oracle SOA Suite, Oracle The Increasing Focus on Architecture (ArchBeat) blogs.oracle.com As a "third wave" of computing, Cloud computing is changing how IT organizations and individuals within those organizations approach the creation of solutions. Updated SOA Documents now available in ITSO Reference Library blogs.oracle.com Nine updated documents have just been added to the IT Strategies from Oracle library, including SOA Practitioner Guides, SOA Reference Architectures, and SOA White Papers and Data Sheets. Access to all documents within the ITSO library is free to those with a free Oracle.com membership. WebLogic JMS Clustering and Spring | Rene van Wijk middlewaremagic.com Oracle ACE Rene van Wijk sets up a WebLogic cluster that includes a JMS environment, which will be used by Spring. Running Built-In Test Simulator with SOA Suite Healthcare 11g in PS4 and PS5 | Shub Lahiri blogs.oracle.com Shub Lahiri shows how the pre-installed simulator that comes with the SOA Suite for Healthcare Integration pack can be used as an external endpoint to generate inbound and outbound HL7 traffic on specified MLLP ports. In the cloud era, let's start calling IT what it is: 'Innovation Team' | Joe McKendrick www.zdnet.com Cloud, the third great shift in 50 years of computing, presents a golden opportunity for IT to get out in front and lead. Thought for the Day "Why do we never have time to do it right, but always have time to do it over?" — Anonymous

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >