Search Results

Search found 18916 results on 757 pages for 'sharing nothing architect'.

Page 541/757 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

  • Backup Gmail using Mail.app and IMAP without redundancy

    - by Cawas
    I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

    Read the article

  • How can I trigger the creation of a new CLB file?

    - by Xperimental
    I'm currently having a problem with an application using COM running on Windows Vista. The application runs ok on one machine, but doesn't work on a similar configured machine. Both machines are virtual images originating from the same source image. While searching the registry for causes of this error, I came across the CLBVersion key in HKCR\CLSID which seems to have something to do with COM. The value of the key differs between the two machines (0x6 on the erroneous one, 0xc on the working one). Also there are files containing the same number in their filenames in the %SystemRoot\Registration directories of the machines. They are called R000000000006.clb and R00000000000c.clb respectively. I have already searched the windows event log for anything leading to the creation of those files (I have searched by the creation date of the files). Now a few questions regarding the registry keys and the files: Is it correct, that this is connected to COM? What is the function of the files? What causes the creation of a new "CLBVersion"? Is there a way for me to trigger the creation of a new CLB file? edit: I have now found out, that this has nothing to do with my application error. But I would still be interested in details about the registry key and the files. An installation of Visual Studio 2005 has brought the second machine to the same configuration (0xc in registry and file) as the other one.

    Read the article

  • RoboCopy fails with "the specified network name is no longer available"

    - by Justin Scott
    We have a scheduled task that runs robocopy periodically to mirror a rather large folder structure from one server to another (thousands of folders, 100,000+ files, 50+ GB in size). There is a share on the receiving server where the mirror gets stored. We're running the task from the origin server connecting out to the share on the receiving end. Both servers run Windows Server 2003 and are connected to the same network switch (100Mbps). The process will sometimes complete all the way through without error. More often than not, however, at some point during the process (seems random as to where), robocopy will fail with the error The specified network name is no longer available. It will wait 30 seconds and try the file again and eventually give up after a number of retries. Process will repeat at the next schedule interval and may complete... or not. When this occurs I am not able to access the share at all on the destination server from anywhere on the network for up to 30 minutes. There is nothing else on the network using this share. My question is what does this error mean specifically? Why is the share "dropping off" and becoming inaccessible? Is there a way to prevent it and get the file mirroring to be more stable?

    Read the article

  • pfSense Firewall or Linsys/Cisco router for small offices

    - by Tim Meers
    I'm about to start switching some networks around for multiple small offices. Each office has about 10 to 15 users and 10 to 15 computers. Each office has a spread of generic routers and access points. The routers vary from being used as routers, to just being an access point for wireless. Nothing formal has really ever beem implemented for each of the 10 offices. What I'm wanting is to set up a pfSense box for each office to configure things like: traffic shaping (for VoIP QOS) URL Filtering DHCP static routing multiple VLANs I'll then use some of the existing hardware for wireless. Maybe even integrate the wireless right into the firewall depending on the office layout. So my question, would this be better to do a full blown firewall box, or but a new business class or high end consumer class Linksys router to do the URL filtering, QOS and DHPC? Each option could allow for remote access and VPN for remote maintnance and each would only cost a nominal about of money for something decent, i.e. under $250.

    Read the article

  • How do I renew an expired Ubuntu OpenLDAP SSL Certificate

    - by Doug Symes
    We went through the steps of revoking an SSL Certificate used by our OpenLDAP server and renewing it but we are unable to start slapd. Here are the commands we used: openssl verify hostname_domain_com_cert.pem We got back that the certificate was expired but "OK" We revoked the certificate we'd been using: openssl ca -revoke /etc/ssl/certs/hostname_domain_com_cert.pem Revoking worked fine. We created the new Cert Request by passing it the key file as input: openssl req -new -key hostname_domain_com_key.pem -out newreq.pem We generated a new certificate using the newly created request file "newreq.pem" openssl ca -policy policy_anything -out newcert.pem -infiles newreq.pem We looked at our cn=config.ldif file and found the locations for the key and cert and placed the newly dated certificate in the needed path. Still we are unable to start slapd with: service slapd start We get this message: Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/ Here is what we found in /var/log/syslog Oct 23 20:18:25 ldap1 slapd[2710]: @(#) $OpenLDAP: slapd 2.4.21 (Dec 19 2011 15:40:04) $#012#011buildd@allspice:/build/buildd/openldap-2.4.21/debian/build/servers/slapd Oct 23 20:18:25 ldap1 slapd[2710]: main: TLS init def ctx failed: -1 Oct 23 20:18:25 ldap1 slapd[2710]: slapd stopped. Oct 23 20:18:25 ldap1 slapd[2710]: connections_destroy: nothing to destroy. We are not sure what else to try. Any ideas?

    Read the article

  • Crazy problem with Nginx, PHP5-FPM on Ubuntu

    - by Emmanuel
    I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

    Read the article

  • TS (RD) Gateway Authentication Problem "The logon attempt failed"

    - by user2059
    I've been using TS Gateway to permit remote access for our staff for a few months now, and all has been well. Users either connect to a traditional terminal server desktop or hit our website and start an TS RemoteApp application- in both cases the connection is routed through a TS Gateway. However I came into work this morning to find that has stopped authenticating users through TS Gateway, each time returning "The logon attempt failed" as seen in the image even though the credentials are correct. It should be noted that everything works fine if the Gateway is taken out of the equation, it's the TS Gateway component that is causing these problems. Users experience this problem whether they connect through XP SP3, Vista or 7. On the server a total of 4 entries appear in the Windows security log at exactly the same time for each failed logon attempt: two 4624 "An account was successfully logged on" messages for the user, immediately followed by two 4634 "An account was logged off"s. This suggests that the server is accepting the credentials as correct, then booting the user off. Nothing at all is recorded in the NPS and Terminal Server logs. A reboot doesn't change things. Neither does completely removing and reinstalling the NPS and Terminal Server roles. I'm baffled as to how this can happen suddenly without warning. Any suggestions would be greatly appreciated.

    Read the article

  • Non-functioning AutoFilter on Locked Cells in Office 2008 - works in Office 2007

    - by Sarcas
    I'm looking into a problem for someone, who works in a mixed OS environment. She has created an Excel spreadsheet in Office 2007 to act as a directory, with AutoFilter turned on for names, email addresses, departments etc. To make sure no one accidentally edits email addresses (for example), she has protected the work sheet. Accessing this worksheet on a PC running Excel 2007, everything runs as you'd expect. You can filter the sheet by any of the auto-filtered columns, and because the sheet is protected, the data integrity is guaranteed. However, if you access the sheet on a Mac running Excel 2008, you can't filter the columns. What's strange here is that the AutoFilter dropdown arrows do appear in each of the column headers as you would expect. It's just that nothing happens if you click on them. If you select one of the column header cells (say, 'First Name') and check the menu: Data-Filter, you can see that AutoFilter is ticked. As another datapoint, you also seem to be able to apply an Advanced filter to these rows on the protected sheets. Does anyone know why this might be? It seems to be a compatibility issue between Excel 2007/2008 (I know the codebase isn't the same), but I can't find any references to it in documentation or forums anywhere, and it would be good to know if there's a way around this. Thanks!

    Read the article

  • Legacy non-dpi-aware application resolution scaling?

    - by Miles Erickson
    Our environment prominently featuers an outdated but absolutely mission-critical Win32 application that is not dpi-aware. It is optimized for an 800x600 display. Most of our users now have 17"-20" displays with native resolutions ranging from 1280x1024 to 1680x1050. However, they still operate these displays at 800x600 because the text in this legacy application is otherwise too small. Of course, it also means that nothing quite fits on the screen in Office 2007. Most of our workstations still run Windows XP, but some are on Windows 7 and there are more to come. About one-third of our users run the app remotely via MS Terminal Services, and the remainder run it locally. Is anyone aware of any method that could be used to scale this specific application to about 170%, so that it would fill a 1280x1024 screen, without affecting other applications that work best at the display's native resolution? I know how to do this in Mac OS X, but I have never found a way to do it in Windows. Of course, this ideally would be something that we could push out via Group Policy. I suppose we even could create a custom MSI package to re-deploy the legacy application with some sort of display virtualization layer, if such a thing exists.

    Read the article

  • Side-By-Side Configuration Error VC90.CRT

    - by Swiss
    I keep receiving the following error when trying to run MikTeX 2.8 or Visual Studio 2008 on 64-Bit Windows Vista. It's particularly odd because both programs were working problem free until a few days ago. The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail. Opening the Application log provides the following information: Activation context generation failed for "C:\Program Files (x86)\MiKTeX 2.8\miktex\bin\texworks.exe". Error in manifest or policy file "C:\Program Files (x86)\MiKTeX 2.8\miktex\bin\Microsoft.VC90.CRT.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.30729.4148". Definition is Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.30729.1". Please use sxstrace.exe for detailed diagnosis. It looks like the problem is with Microsoft.VC90.CRT.MANIFEST, but I am not sure why or how to fix this problem. I have tried uninstalling/reinstalling Visual Studio and MikTeX, as well as uninstalling/reinstalling Microsoft's C++ Redistributable, but nothing seems to be fixing this problem.

    Read the article

  • AirPort Express Discoverability

    - by andybjackson
    I bought an AirPort Express to enable music in a different part of a friend's house using the AirTunes feature. Unfortunately, iTunes or the AirPort Utility don't reliably discover the existence of the device. If I use the "Configure Other..." function within the AirPort Utility and enter the AirPort Express' IP address and password, then I can reliably get access in a daughter window to configure it. This seems to nudge the underlying AirPort Utility into "finding" and displaying the AirPort Express, which it doesn't do on its own even after clicking the "Rescan" button. iTunes then also seems to cotton on to this discovery and present the AiportExpress as an AirTunes option at the bottom right of iTunes. Things then works as we'd like them to. If I close down the AirPort Utility, then iTunes loses the AirPort Express AirTunes speaker, often giving "An unkown error (-15006) occurred while connecting to the remote speaker". Of course, starting the Airport Utility, forcing it to recognise the Airport Express and then starting iTunes, isn't the ease of use I was after. Background info: iTunes is running on Windows XP. The AirPort Express is running in wireless client mode (i.e. is connecting to an unsecured wireless network in the house with nothing connected to its ethernet port). The network router is a Swisscom Motorola 3347NWG (with firmware 7.8.5r1). I have already tried: Disabling the Windows XP firewall Updating the AirPort Express firmware, the AirPort Utility and the router firmware Ensuring Wireless privacy and similar potetnially problematic router settings are off Solutions, or even just ideas of other things to try would be gratefully received.

    Read the article

  • Can connect through Watchguard mobile VPN, but can't ping or access network drives

    - by johnnyb10
    We're having any issue in which some of our employess can no longer connect to our network drives when out of the office. We use Watchguard Mobile VPN (we have a Watchguard Firebox firewall) and the users are able to connect. That is, their status in the the VPN client says "Connected" and they have the correct IP address listed as the VPN Endpoint. The problem is, when they try to map drives, or even ping the IP address of a server on our network, it fails. Last week, we temporarily switched one of our Comcast modems to our backup DSL modem because the Comcast was accidentally shut off by Comcast, and the problem seemed to start around then. We've since switched back and the problem persists, so that doesn't seem to have been it (which makes sense). But we also made other changes at the time that might have thrown something off, although we feel like we've checked them all. Plus, some people can successfully connect to network drives through the VPN. Can someone please suggest some steps to help troubleshoot? We've checked the policies on our Watchguard box, and they seem fine. We've looked at the settings on the Mobile VPN client, but nothing seems like a probable cause. Thanks.

    Read the article

  • APC fragmention woes on Apache AWS EC2 Small instance with WordPress and W3TC

    - by two7s_clash
    AWS EC2 Small instance, Apache 2 running WordPress and W3TC. Within an hour, my APC fragmentation hits 100%. My APC settings are: apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 100M apc.optimization = 0 apc.num_files_hint = 512 apc.user_entries_hint = 1024 apc.ttl = 7200 apc.user_ttl = 7200 apc.gc_ttl = 3600 apc.cache_by_default = 1 apc.use_request_time = 1 apc.filters = "apc\.php$" apc.mmap_file_mask = "/tmp/apc.XXXXXX" apc.slam_defense = 0 apc.file_update_protection = 2 apc.enable_cli = 0 apc.max_file_size = 2M apc.stat = 1 apc.write_lock = 1 apc.report_autofilter = 0 apc.include_once_override = 0 apc.rfc1867 = 0 apc.rfc1867_prefix = "upload_" apc.rfc1867_name = "APC_UPLOAD_PROGRESS" apc.rfc1867_freq = 0 apc.localcache = 0 apc.localcache.size = 256M apc.coredump_unmap = 0 apc.stat_ctime = 0 apc.canonicalize = 1 apc.lazy_functions = 0 apc.lazy_classes = 0 /etc/php.d/apc.ini More poop can be seen here. Mostly cribed settings from here. The shm was meant to be whittled down from such a high value after some observation, but apparently such a large value isn't even high enough.... I found an similar question/answer here. I do have some virtual hosts setup, but they aren't being touched much at all. Having users logged into the admin panel of WP does make things worse, but that's certainly not the main culprit. The question asker seems to suggest that it turns out W3TC is probably causing the problem, which the plugin author seems to agree with, but there aren't any helpful details beyond that. Why is it causing the problem? Do I just take it for now and turn off object caching with APC? Is there nothing I can do? Does having it turned on without being used for object caching actually help anything? Would memcache be an ok substitute just for object caching here? Finally, maybe I just shouldn't worry so much about the fragmentation?

    Read the article

  • Dovecot install: what does this error mean?

    - by jamie
    I have postfix and dovecot installed on CentOS 6 (linode) along with MySQL. The table and user is already set up, postfix installed fine, but dovecot gives me this error in the mail log: Warning: Killed with signal 15 (by pid=9415 uid=0 code=kill) The next few lines say this: Apr 7 16:13:35 dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) Apr 7 16:13:35 dovecot: config: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1: protocols=pop3s is no longer supported. to disable non-ssl pop3, use service pop3-login { inet_listener pop3 { p$ Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:5: ssl_cert_file has been replaced by ssl_cert = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:6: ssl_key_file has been replaced by ssl_key = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:8: namespace private {} has been replaced by namespace { type=private } Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:25: auth_user has been replaced by service auth { user } I am following directions for the install on CentOS 5 with changes in the dovecot.conf file from different sources specific to CentOS 6. So the dovecot.conf file might not be correct, but there is no good source I have found yet for making dovecot install correctly. Can anyone tell me what the error above means? The terminal does not give any message as to start OK or FAIL. When I issue the service dovecot start command, it says: Starting Dovecot Imap: and nothing more.

    Read the article

  • Unexplained CPU and Disk activity spikes in SQL Server 2005

    - by Philip Goh
    Before I pose my question, please allow me to describe the situation. I have a database server, with a number of tables. Two of the biggest tables contain over 800k rows each. The majority of rows are less than 10k in size, though roughly 1 in 100 rows will be 1 MB but <4 MB. So out of the 1.6 million rows, about 16000 of them will be these large rows. The reason they are this big is because we're storing zip files binary blobs in the database, but I'm digressing. We have a service that runs constantly in the background, trimming 10 rows from each of these 2 tables. In the performance monitor graph above, these are the little bumps (red for CPU, green for disk queue). Once ever minute we get a large spike of CPU activity together with a jump in disk activity, indicated by the red arrow in the screenshot. I've run the SQL Server profiler, and there is nothing that jumps out as a candidate that would explain this spike. My suspicion is that this spike occurs when one of the large rows gets deleted. I've fed the results of the profiler into the tuning wizard, and I get no optimisation recommendations (i.e. I assume this means my database is indexed correctly for my current workload). I'm not overly worried as the server is coping fine in all circumstances, even under peak load. However, I would like to know if there is anything else I can do to find out what is causing this spike? Update: After investigating this some more, the CPU and disk usage spike was down to SQL server's automatic checkpoint. The database uses the simple recovery model, and this truncates the log file at each checkpoint. We can see this demonstrated in the following graph. As described on MSDN, the checkpoints will occur when the transaction log becomes 70% full and we are using the simple recovery model. This has been enlightening and I've definitely learned something!

    Read the article

  • Windows Server 2008 Stops Responding (Hyper-V Role Enabled)

    - by blackf0rk
    The machine is a brand new Dell Precision m6500, Core i5, 8GB RAM. Windows Server 2008 R2 (fully patched) with Hyper-V Role Enabled. Virtualization options in the BIOS are ON, SpeedStep is OFF, couldn't find C1E option in the BIOS to turn it off (I also got the impression that SpeedStep is C1E, but the Intel Product site lists them as separate "features." shrug) The server stops responding without any apparent reason. I've tried testing in multiple scenarios, all of which result in a crash at seemingly random times: With the Server sitting idle, no apps running. Server sitting idle with a Virtual Machine running. Using a BurnInTest application There's no blue screen. It doesn't restart. The screen just sits there. The keyboard backlight still responds and comes on with input, but nothing on the screen changes. There are no errors in the error log. I have to hold down the power button to turn it off. Doing memory tests on bootup results in no errors with the memory. I have a second identical system and the same thing happens there too. I've dual-booted into Windows 7 Profession x64 on this system with no problems. Further testing has shown that the issue is definitely related to Windows Server 2008 R2 and Hyper-V as it appears the crashing does not happen when the services are not running. I've installed all hotfixes relating to this issue (that I could find): 975530, 979444, 979491, 976427 System is still crashing without response.

    Read the article

  • Problems during an update of cPanel / WHM

    - by haron
    I ordered a Master WHM account with the couple CentOS / cPanel. whm-cpanel.eu.pn The installation is a fresh update of the basic services was necessary (had: WHM 11.15.0 cPanel 11.17.0 WHM X v3.1.0, Apache 1.3.37, PHP 4.4.7, MySQL 4.1.22). 1 / I started to update cPanel / WHM via the command: / scripts / upcp. Everything went well until the middle of installing the server stopped responding (or ping, or ssh). The installation appears to have continued alone to the end and after some time everything is back to normal (I do not know if there was a reboot) and my interface was updated (cPanel 11.24.4-R36167 - WHM 11.24.2 - X 3.9). 2 / Then I updated via the MySQL interface tweak this in WHM then the command: / scripts / mysqlup. Here everything went fine, no problem. 3 / Finally, I wanted to upgrade Apache 2.2 / PHP 5 and I used this command: / scripts / easyapache. After selecting all the packages and modules installation is started but the same as for point 1: the server did not answer more and this time the installation did not go through. Apache 2.2 is well spent (after the second try) but PHP has remained at 4. I tried several times the same operation without success. I do not think this is a memory problem, a free-m shortly before losing communications gave nothing alarming. By cons CPU time seemed to rise up. I reinstalled the machine again the trick, same problem! Whether via the WHM interface or by Shell, the installation stops short, for 15 minutes the machine is not responding and then everything returns to normal, but no update is done in PHP. Is there a known bug in this version of cPanel / WHM? Someone he met the same problem? If I compile Apache / PHP manually, without using the script easyapache is what I might encounter problems with cPanel later? Thank you!

    Read the article

  • Powerpoint 2010 crash on quickstyle menu

    - by Marcus Lindblom
    Windows 7 64-bit, recent install, added Office 2010. When I create some boxes and open the quick-style menu, it crashes (or stops responding, in windowese, and then it sends an error report). I've run the "Repair" from the installer, but it didn't help. There's nothing in Windows Update I've Googled and searched on Microsoft's site, but n Any other ideas? (It's not related to this ppt crash question as that concerns PPT 2007. Error in event log: Faulting application name: POWERPNT.EXE, version: 14.0.4754.1000, time stamp: 0x4b967cf2 Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfe0 Exception code: 0xe0000003 Fault offset: 0x000000000000aa7d Faulting process id: 0xee8 Faulting application start time: 0x01cb9dc710fd76d8 Faulting application path: C:\Program Files\Microsoft Office\Office14\POWERPNT.EXE Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: 58766562-09ba-11e0-90d1-00215a139192 And: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: POWERPNT.EXE P2: 14.0.4754.1000 P3: 4b967cf2 P4: KERNELBASE.dll P5: 6.1.7600.16385 P6: 4a5bdfe0 P7: e0000003 P8: 000000000000aa7d P9: P10: Attached files: C:\Users\marcusl\AppData\Local\Temp\CVR86DD.tmp.cvr C:\Users\marcusl\AppData\Local\Temp\WERC765.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\marcusl\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_POWERPNT.EXE_d45f313d77f7e52cc8682b2b64cc3898127c2c_1106e3ac Analysis symbol: Rechecking for solution: 0 Report Id: 58766562-09ba-11e0-90d1-00215a139192 Report Status: 1

    Read the article

  • Squid configuration for proxy server

    - by Ian Rob
    I have a server with 10 ip's that I want to give access to some friends via authentication but I'm stuck on squid's config file. Let's say I have these ip's available on my server: 212.77.23.10 212.77.1.10 68.44.82.112 And I want to allocate each one of them to a different user like so: 212.77.23.10 goes to user manilodisan using password 123456 212.77.1.10 goes to user manilodisan1 using password 123456 68.44.82.112 goes to user manilodisan2 using password 123456 I managed to add the passwords and authentication works ok but how do I do to restrict one user to one of the available ip's? I have a basic setup from different bits I found over the internet but nothing seems to work. Here's my squid.conf (all comments are removed to make it lighter): acl ip1 myip 212.77.23.10 acl ip2 myip 212.77.1.10 tcp_outgoing_address 212.77.23.10 ip1 tcp_outgoing_address 212.77.1.10 ip2 http_port 8888 visible_hostname weezie auth_param basic program /usr/lib/squid/ncsa_auth /etc/squid/squid-passwd acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 # https acl SSL_ports port 563 # snews acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache extension_methods REPORT MERGE MKACTIVITY CHECKOUT hosts_file /etc/hosts forwarded_for off coredump_dir /var/spool/squid

    Read the article

  • Why can't I reconnect to my Philips SHB9000 bluetooth headset?

    - by Thomas Eyde
    This is so annoying. When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

    Read the article

  • Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

    - by Kirill
    I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

    Read the article

  • Excel cannot access the file with IIS7&Windows Serer 2008 R2(64bit)

    - by user838204
    I have a web project(.Net4) that needs to access Excel file, but it ends up with the following error message: Error occured during file generation.Microsoft Excel cannot access the file 'D:\xx\xx\abc.xls'. There are several possible reasons: • The file name or path does not exist. (Actually it's there) • The file is being used by another program.(It cant happen) • The workbook you are trying to save has the same name as a currently open workbook. In IIS7, I use DefaultAppPool with the Identity "myservice" who's under the Group of Administrators. In the Authentication Page of my website under IIS, Anonymous Authentication was enabled and set to "Application pool identity" and ASP.NET Impersonation was disabled. After searching the solution for hours, I found the following but NONE of them work Create folder in C:\Windows\SysWOW64\config\systemprofile\Desktop. Plz refer:this Grant rights of "myservice" in Component Services. Plz refer:this One thing strange, there is nothing in the Group of IIS_IUSRS. Is that normal? Cause I remember at least two users (DefaultAppPool & Classic .Net AppPool). Plz tell me how to fix the access problem. I assume that's permission problem of IIS but I cant solve it. Thank you.

    Read the article

  • How do I hide "Extra File" and "100%" lines from robocopy output?

    - by Danny Tuppeny
    I have a robocopy script to back up our Kiln repositories that runs nightly, which looks something like this: robocopy "$liveRepoLocation" "$cloneRepoLocation" /MIR /MT /W:3 /R:100 /LOG:"$backupLogLocation\BackupKiln.txt" /NFL /NDL /NP In the output, there are a ton of lines that contain "Extra file"s, like this: *EXTRA File 153 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.fdt *EXTRA File 12 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.fdx *EXTRA File 128 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.fnm *EXTRA File 363 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.frq *EXTRA File 13 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.nrm Additionally, there are then hundreds of lines at the bottom that contain nothing but "100%"s, like this: 100% 100% 100% 100% 100% 100% 100% In addition to making the log files enormous (there are a lot of folders/files in Kiln repos), it makes it annoying to scan through the logs now and then to see if everything was working ok. How do I stop "Extra Files" appearing in the log? How do I stop these silly "100%" lines appearing in the log? I've tried every combination of switch I can think of (the current switches are listed above in the command), but neither seem to hide these!

    Read the article

  • Disabling standby modus on Gear4 Blackbox speakers

    - by cj
    I have a set of bluetooth Gear4 Blackbox speakers. The sound quality and the design is great, but it switches to standby modus automatically every now and then, when I am listening to music and when it's silent. In that situation, the only way to get them working again is turning them off and on, since they do not react to the remote nor to the buttons on top of it. I emailed Gear4 with this problem and they recommended me to reflash the firmware again, but the problem is persisting after having done that. It has nothing to do with the device that is streaming music. So, the question is, is there a way to disable the standby modus permamently, so the speakers are all the time active even if I am not using them? To switch them off I would just turn the power switch off. If anyone is curious about what device I am talking about, here's a link to Amazon, but I wouldn't reccomend anyone to buy them because of this problem. http://www.amazon.co.uk/Gear-4-PG142-GEAR4-BlackBox/dp/B000QEFZI2 Thanks in advance.

    Read the article

  • Reverse Proxies and AJAX

    - by osij2is
    A client of ours is using IBM/Tivoli WebSEAL, a reverse-proxy server for some of their internal users. Our web application (ASP.NET 2.0) and is a fairly straightforward web/database application. Currently, our client users that are going through the WebSEAL proxy are having problems with a .NET 3rd party control. Users who are not going through the proxy have no issues. The 3rd party control is nothing more than an AJAX dynamic tree that on each click requests all the nodes for each leaf. Now our clients claim that once users click on a node in the control, the control itself freezes in such a way that they don't see anything populate. Users see "Loading..." message appear but no new activity there afterwards. They have to leave the page and go back to the original page in order to view the new nodes. I've never worked with a reverse proxy before so I have googled quite a bit on the subject even found an article on SF. IBM/Tivoli has mentioned this issue before but this is about all they mention at all. While the IBM doc is very helpful, all of our AJAX is from the 3rd party control. I've tried troubleshooting using Firebug but by not being behind the reverse proxy, I'm unable to truly replicate the problem. My question is: does anyone have experience with reverse proxies and issues with AJAX sites? How can I go about proving what the exact issue is? Currently we're negotiating remote access so assume for the greater part that I will have access to a machine that's using the WebSEAL proxy. P.S. I realize this question might teeter on the StackOverFlow/ServerFault jurisdictional debate, but I'm trying to investigate from the systems perspective. I have no experience with reverse proxies (and I'm unclear on the benefits) and little with forwarding proxies.

    Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >