Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 545/757 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• What can I do to utilize all my hard disk space?

  - by Twatcher

  I had windows XP running on my computer. Then I installed Ubuntu from under windows. Then I decided I wanted to have only Ubuntu also because I got a system message that I am out of disk space. I loaded up my system from a live Ubuntu DVD and deleted the partition with windows on it and also the other partition that had my data on it. I expanded the partition which I thought to be the system partition (since there was no other partition left It had ext format. After that Ubuntu was working fine and I thought I have enough disk space, since my harddrive is an 80 GB ATA Maxtor. I left a small partition as backup. But after downloading a small amount of files I got the message again, that I am running out of disk space. I don't now. How can UI make my disk space bigger? I am not used to Ubuntu's file system, and I don't have the overview on how I can actually see how much space there is left for me to use. I have basically now 1 partition with the system on it and one small backup (as far as I understand). My system is (from system utility) Ubuntu 12.04 LS 3,9 GB Intel Core 2 2,4 Ghz 80 GB ATA Maxtor Here are the results for sudo fdisk -l Disk /dev/sda: 80.0 GB, 79998918144 bytes<br> 255 heads, 63 sectors/track, 9725 cylinders, total 156247887 sectors<br> Units = sectors of 1 * 512 = 512 bytes<br> Sector size (logical/physical): 512 bytes / 512 bytes<br> I/O size (minimum/optimal): 512 bytes / 512 bytes<br> Disk identifier: 0x41ab2316<br> Device Boot Start End Blocks Id System<br> /dev/sda1 * 63 123750399 61875168+ 7 HPFS/NTFS/exFAT<br> /dev/sda2 123750400 156246015 16247808 7 HPFS/NTFS/exFAT<br>

  Read the article

• Why is LSHW Only listing one of my two HDDs?

  - by Mark

  I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

  Read the article

• Authenticate native mobile app using a REST API

  - by Supercell

  I'm starting a new project soon, which is targeting mobile application for all major mobile platforms (iOS, Android, Windows). It will be a client-server architecture. The app is both informational and transactional. For the transactional part, they're required to have an account and log in before a transaction can be made. I'm new to mobile development, so I don't know how the authentication part is done on these platforms. The clients will communicate with the server through a REST API. Will be using HTTPS ofcourse. I haven't yet decided if I want the user to log in when they open the app, or only when they perform a transaction. I got the following questions: 1) Like the Facebook application, you only enter your credentials when you open the application for the first time. After that, you're automatically signed in every time you open the app. How does one accomplish this? Just simply by encrypting and storing the credentials on the device and sending them every time the app starts? 2) Do I need to authenticate the user for each (transactional) request made to the REST API or use a token based approach? Please feel free to suggest other ways for authentication. Thanks!

  Read the article

• SOA performance on SPARC T5 benchmark results

  - by JuergenKress

  The brand NEW super fast SPARC T5 servers are available. The platform is superb to run large SOA Suite environments or to consolidate your whole middleware platform. Some performance advices, recommended for all workloads: Performance profile for SOA apps on Oracle Solaris 11 BPEL (Fusion Order Demo) instances per second OSB (messages / transformations per second) Crypto acceleration study for SOA transformations SPARC T4 and T5 platform testing, pre-tuning Performance suitable for mid-to-high range enterprise in stand-alone SOA deployment or virtualized consolidation environment shared with Oracle applications 2.2x to 5x faster than SPARC T3 servers 25% faster SOA throughput, core to core than Intel 5600-series servers (running Exalogic software) SPARC T5 has 2x the consolidation density of Intel 5600-class processors 2x faster initial deployment time using Optimized Solutions pre-tested configuration steps Over 200 Application adapters for easiest Oracle software integration Would you like to get details? We can share with you on 1:1 bases T5 SOA Suite performance benchmarks, please contact your local partner manager or myself! SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: T5,TS Sparc,T5 SOA,bechmark,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Visual Studio 2012 first impressions...no Macros!

  - by bconlon

  Yesterday I installed Microsoft Visual Studio 2012 for the first time (all 8.5GB) and after 20 years of (mostly) happy times using VS they have removed Macros, one of the most handy features.The first thing I wanted to do when I upgraded my VS2010 project was to add a #elseif block to each file. This would usually be simple case of find in files of the previous #elseif and then Ctrl+Shift+R to record a macro which would be: F8 (to select the next file from find list), F3 (to find the correct position in file), Ctrl+V to paste the new code. Then all I would need to do is keep Ctrl+Shift+P (Play Macro) pressed until all the files were processed.But alas Ctrl+Shift+R does nothing! I won’t say that I use Macros every day but it was a very useful feature.To continue my moaning a little more, I also don't like the bland interface. This has been well documented by others, but now I have used it myself, I find it difficult to tell one grey area of screen from another and the lack of colour makes the icons unclear.I also don't see why the menus now need to SHOUT in capital letters?On the plus side, they have now added the ability to see WPF properties in the debugger...a bit of an oversight in Visual Studio 2010. Oh, but you still can't edit and continue on files that contain templated code.Whilst Visual Studio 2012 is not a complete disaster like Windows 8 (why develop a desk top OS to be the same as a Smart device OS), it does not float my boat.Rant over.#

  Read the article

• Install lubuntu on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. So I tryied the old xorg way to edit the missing resolution: Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... Anyone can help me and tell me how to reconfigure X with the terminal? Can anyone give me a hand?

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

• Installation causing broken packages

  - by AWE

  Here I come I am so determined to use Ubuntu that I paid a professional to install it for me (dualboot). When I got it I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev but doesn't help, only makes life complicated. What the *#$%&!!! I don't want to be forced to become a computer scientist just to be able to use a free source os. P.s. the sound stopped working

  Read the article

• Uninstalling ATI's drivers and installing NVIDIA's?

  - by whydidithavetobreak

  I replaced my card but I'm not sure how to set things up on Ubuntu. When the computer boots, it doesn't start GDM (I think that's what it's called). Instead, it asks me to log in the command line. If I try to do a startx, it tells me there is no AMD device connected or something to that extent. I originally installed the ATI drivers using the GUI. It said that I was using the limited drivers or something to that extent with a popup on the right of one of the taskbars, so I clicked there and updated it. I think it could also be reached by going to system administration restricted drivers or something close to that. I tried installing the nivida drivers by doing a "sudo apt-get install nvidia-glx-185" and then doing "sudo modprobe nvidia" and "sudo nvidia-xconfig" as this guy says but that didn't work. Modprobe couldn't find anything related to Nvidia and nvidia-xconfig wasn't an available command for me. Since I wasn't sure how to remove the ATI drivers I did that without messing with them. Not sure if that was a good idea.

  Read the article

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• Tip: Keeping the ADF Mobile PDF Guide up to date

  - by Chris Muir

  This is a little tip for customers using Oracle's ADF Mobile. If you're like me, it's possible you don't rely on the online HTML version of the Mobile Developer's Guide for ADF, but rather download a PDF version of the file to use locally (look to the "PDF" link to the top right of the guide).  For me the convenience of the PDF is it's faster, I can search the whole document easily, I can split read the document across two pages on my home monitor, if I lose my internet connection the document is still available, and it's easy to read on my iPad (especially on long haul flights to the US across the Pacific where there is no internet connection!). The trigger point for me to download the Oracle PDF documentation has always been on a new point release of JDeveloper.  However in the case of ADF Mobile, as an extension to JDeveloper it is releasing at a much faster and independent schedule to JDeveloper and this includes updates to the documentation. As such the 11.1.2.4.0 ADF Mobile PDF guide you have locally might be out of date and you should take the opportunity to download the latest version.  This is also particularly important for ADF Mobile as not only are many new features being added for each release and included in the new documentation, but the guide is under rapid improvement to clarify much of what has been written to date.  Our documentation teams are super responsive to suggestions on how to improve the guides and this often shows per point release. How do you tell you've the latest guide? Look to the document part number which right now is "E24475-03".  This is a unique ID per release for the document, the first part being the document number, and the part after the dash the revision number.  If the website document number has a higher revision number, time to download a new up to date PDF. One last thing to share, you can follow the ADF Mobile guide document manager Brian Duffield on Twitter to keep abreast of updates. Image courtesy of Stuart Miles / FreeDigitalPhotos.net

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Will proprietary software-based sound enhancements work with Ubuntu? (BeatsAudio, Dolby)

  - by LiveWireBT

  This question is targeted at mainstream or gamer-grade software-based audio/sound enhancements, found in highly integrated computing and entertainment systems like laptops, tablets and smartphones. These are mostly marketed with fancy badges of known audio-releated brands on the product or packaging, while being mostly uncertain about the actual implementation or components used and poorly differentiated from the general audio capabilities of the system or device. This question is not about actual hardware like speakers. If your headphones are not properly detected, your speakers are assigned wrong, work partially or not at all then your soundcard or chip is not properly detected and you should take a look at troubleshooting audio issues. This question is also not about enthusiast or recording-grade hardware like recording interfaces, amplifiers and DACs in a variety of formfactors. And this question is also not about audio encoding and playback of different audio formats like Dolby Digital, Dolby TrueHD and DTS. Most of these may be subject to patents and licensing, see restricted formats. If you are just searching for an equalizer, please take a look at this question: Is there any Sound enhancers/equalizer? Simply speaking: Every feature where you would flip a switch or check a box in a fancy looking interface in Windows that makes the sound change from neutral to fancy.

  Read the article

• Free vouchers to become a certified ADF or WebLogic Implementation Specialist

  - by JuergenKress

  For all WebLogic & ADF experts, we offer 100 free vouchers worth $195 to become an Oracle certified expert. To receive a WebLogic & ADF voucher please send an e-mail with the screenshot of your WebLogic Server 12c PreSales Specialist or ADF 11g PreSales Specialist certificate to [email protected] including your Name, Company, e-mail and Country with the e-mail subject free WebLogic & ADF voucher! WebLogic ADF Pre-Sales assessment (free online test) Preparation: WebLogic 12c PreSales Specialist (OPN account required – need help?) ADF 11g PreSales Specialist (OPN account required – need help?) Implementation assessment Preparation: WebLogic 12c Implementation Specialist WebLogic Bootcamp training material (Community membership required) WebLogic Knowledge Zone Overview ADF 11g Implementation Specialist ADF 11g bootcamp training material (Community membership required) ADF Knowledge Zone Overview Free vouchers are reserved for partners from Europe, Middle East and Africa. Any other countries please contact your local partner manager! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Specialization,ADF certified,WebLogic certification,education,free exam,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Mplayer not working after update

  - by R. Morgenstern

  After an update with update-manager in Unbuntu 12.04, Mplayer is not working anymore. It needs ffmpeg, but it can't be installed due to unmet dependencies. I added a ppa for fmpeg, but did not solve the problem. see output: Python (v2.7) requires to install .... GStreamer ffmpeg video plugin. Codecs to play mpeg, divx, mpeg4, ac3, wmv and asf files. Using Install, I get an error messages that it can't be installed due to unmet dependencies. see list below. How can I fix this problem? Thanks in advance for guidance. Renate The following packages have unmet dependencies: gstreamer0.10-ffmpeg: Depends: libavcodec-extra-53 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavformat-extra-53 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavutil-extra-51 (>= 4:0.7.3-1) but 6:0.10.4.0ubuntu0jon2.2 is to be installed Depends: libc6 (>= 2.7) but 2.15-0ubuntu10 is to be installed Depends: libglib2.0-0 (>= 2.31.2) but 2.32.3-0ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.31) but 0.10.36-1 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.31) but 0.10.36-1ubuntu1 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.16) but 1:0.4.16-1ubuntu2 is to be installed Depends: libpostproc-extra-52 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libswscale-extra-2 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed

  Read the article

• How do I separate model positions from view positions in MVC?

  - by tieTYT

  Using MVC in games (as opposed to web apps) always confuses me when it comes to the view. How am I supposed to keep the model agnostic of how the view is presenting things? I always end up giving the Model a position that holds x and y but invariably, these values end up being in units of pixels and that feels wrong. I can see the advantage* of avoiding that but how am I supposed to? This idea was suggested: Don't think of it in units of pixels, think of them in arbitrary distance units that just happen map to pixels at a 1:1 ratio. Oh, the resolution is half of what it was? We are now taking the x/y coordinates at 50% value for screen display, and your spells casting range is still 300 units long, which now is 150 pixels. But those numbers conveniently work out. What do I do if the numbers divide in such a way that I get decimal places? Floating points are unsafe. I think allowing decimal places would eventually cause really weird bugs in my game. *It'd let me write the model once and write different views depending on the device.

  Read the article

• How can I triple boot Xubuntu, Ubuntu and Windows?

  - by ag.restringere

  Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

  Read the article

• How to adjust the appearance of the Unity in 12.10?

  - by piedro

  Now I updated to 12.10 and would like to adjust the desktop, well unity, appearance. I know there is the theme setting, but I cannot adjust the symbol theme or windows decoration with the systemsettings. I used to use the tool "unsettings" but it doesn't work with 12.10 anymore. Ubuntu Tweak used to be an option but at this point many features are broken and a lot of settings seem to mess up my system or they don't change anything at all (I understand that there has been a design settings change - gsettings, dconf, something ...) myunity has some options to change stuff but I couldn't find it for 12.10 ... not to forget "gnome-tweak-tool" which seems to work for most settings but not for all, e.g. it doesn't change the mouse cursor and the windows decorations do not show some decorations I'd like to use and I am also afraid of messing things up because it is supposed to be used in gnomeshell ... actually as I found out right now it really messes things up: fonts get inverted, suddenly high contrast accessibility setings are used in some windows, nautilus has white fonts on white background and even the login manager is a mess now ... So: How can I adjust the theme, symbol, decorations, fonts for the normal user and for the desktop and for the applications including the applications started as sudo user? I should mention that I upgraded from 12.04 and that some applications like synaptic completely ignore any settings ... sadly it is a mess, there was a time when gnome theming was really well done and very adjustable, I wonder what happened ... Just now I read that further development of Ubuntu Tweak has been stopped. The developer announced that he won't go any further with the software and the online services ... That is sad and destroys my hope for easy appearance editing just by waiting ... has been such a nice tool for 12.04 ... r.i.p.

  Read the article

• Algorithm to match timestamped events from two sources

  - by urza.cc

  I have two different physical devices (one is camera, one is other device) that observe the same scene and mark when a specified event occures. (record timestamp) So they each produce a serie of timestamps "when the event was observed". Theoretically the recorded timestamps should be very well aligned: Visualized ideal situation on two time lines "s" and "r" as recorded from the two devices: but more likely they will not be so nicely aligned and there might be missing events from timeline s or r: I am looking for algorithm to match events from "s" and "r" like this: So that the result will be something like: (s1,null); (s2,r1); (s3,null); (s4,r2); (s5,r3); (null,r4); (s6,r5); Or something similar. Maybe with some "confidence" rating. I have some ideas, but I feel that this might be probably a well known problem, that has some good known solutions, but I don't know the right terminology. I am a little bit out of my element here, this is not my primary area of programming.. Any helps, suggestions etc will be appreciated.

  Read the article

• Can't install the wireless driver in HP Pavilion dv2419us

  - by maqtanim

  I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

  Read the article

• suggestions for lonewolf dev setup

  - by d33j

  I'm looking for some suggestions for a better development setup. Background: I'm a crusty old software engineer (mostly java of late) and I have around 50 - 100 incomplete java projects scattered everywhere, usb keys, HDDs, and spanning across 5 or 6 computers etc, which have been put on hold for a few years (ie: family). I have no version control at home. I've been using IntelliJ for around 10 years, so that's the only constant. I'm thinking of nominating one machine as a headless server to put all my projects on, maybe a ubuntu box, that way It won't matter which device I'm on, all my projects can be accessed (and I don't have to waste time actually looking for them). I don't need to access code over the net. These are my own 'happy place' projects so I only work on them when I'm at home, however I can see the benefit of the tasking app being online, that way if I think of something while on public transport lets say, I can add it then & there, but it's not a requirement. I can wait until I get home to create tasks. Summary: So I need some sort of version control so I can rollback mistakes, and some sort of simple tasking software where I can assign tasks for myself later on when I get time. I use Subversion, Sonar, Jira and Crucible at work but I think it's a little bit of an overkill for me though. What do you suggest?

  Read the article

• Registering in the iOS developer program as a minor

  - by maxluzuriaga

  Hi there. Recently I started learning to develop Apps for iOS, and while the simulator is fine for starting out, I've gotten to the point that I really should be testing the Apps I write on an actual device. As I'm sure you are well aware, to do this you must be a member of the $99/year iOS developer program, which also allows you to publish on the App Store. I'm more than happy to pay the fee, but my problem is that I'm still a minor, and to join the developer program you must be over 18 in the U.S. (I'm not sure how it works in other countries). I've talked to a few others that were in a similar position, but their responses have been varied. From what I've gathered, the best course of action is to register in the name of one of my parents. My problem with this is that if I were to ever publish an App on the store, it would be ideal to have my name as the seller instead of my Dad's. It wouldn't be the end of the world if this happened, but as I said, this wouldn't be ideal. Now I turn to you; is this a good plan? Have any of you been in this position or known somebody who has? Any other tips would be greatly appreciated. Thanks!

  Read the article

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• One monitor getting spilled over into other monitor: how to do a 100% reset of gnome graphics configuration

  - by Paul Nathan

  I had to kill a VMWare process and afterwards, my monitor's configuration is buggy. I have 2 monitors in a side-by-side configuration. My right-hand monitor is the secondary monitor. Upon its right-hand side there are about 50 pixels showing from the left side of the lefthand monitor (ie, as if it was wrapped around). Further, my mouse clicks are registering as about 50 pixels sideways from where they should be. It's as if those 50 pixels between monitors got gobbled. What have I done? I've reset the screen configuration in multiple ways, using xrandr, multiple monitors app, etc. This persists in different side-by-side configurations, and also persists with another user. It does not occur with XFCE. Resetting the Window manager with the Compiz reset WM app does not fix this. I've concluded the burn-to-the-ground approach is likely the best, and would like to do a 100% reset of my graphics settings. It's an Intel integrated chipset. Removing ~/.config/monitors.xml did not work. Also, interestingly, the mouse can mouse-over the 50 errant pixels on the rhs of the right-hand monitor. I hypothesize that it's a compositing problem occurring at the layer where the background, selection, and clicks are caught. Also, inverting the right-hand monitor removes the issue, but renders the screen unusable. Even more datapoints: This happens in KDE as well Sometimes logging into Gnome and running xrandr --output DVI1 --auto resets it, but the issue immediately reappears when I press alt-tab. With Compiz Application Switch turned on, the workspace is 'pushed back' a bit, and the slice on the RHS follows it as well. I'm wondering if it's a flaw in the compiz workspace compositing configuration. I suspect the error was in the compositing configuration. I installed 11.10.

  Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >