Search Results

Search found 18700 results on 748 pages for 'isolated network'.

Page 546/748 | < Previous Page | 542 543 544 545 546 547 548 549 550 551 552 553  | Next Page >

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• JavaOne + Develop Registration is Open!

  - by justin.kestelyn

  Welcome to "The Zone". Here's what the new JavaOne + Develop registration Website says: The world's most important developer conferences are creating the world's coolest neighborhood for the developer community. Having been intimately involved in the planning process, I can vouch for that statement. Remember, if either co-located conference - JavaOne or Oracle Develop - are the confines of your interest, you can experience either one in standalone mode, if you like (although there are some areas of common interest, of course). Or, considering that a single Full Conference Pass gives you access to both of them, you can partake in any measure that you like. It's up to you. Either way, you will get access not only to session content and keynotes, but also to the massive OTN Night party on Monday night, to open unconference sessions, and to the legendary Appreciate Night concert (acts TBD) on Wednesday. Furthermore, as is customary, the Oracle Technology Network team will offer a full slate of community-focused activities and goodies while the conferences are running - more details on those as we have them. A GOOD time is ensured for all; I look forward to seeing you there!

  Read the article

• DFS replication initial step problem

  - by vn.

  I just setup DFS on my network and it's working fine, and now I'm trying to setup DFS-R on a test folder, but then at the end of the procedure (all went fine, selected my 2 folders, primary folder, replication topology and such) I get this error message (roughly translated from french) : Unable to define security on the replicated folder. The shared administration folder doesn't exist. I'm also wondering if there's any required security on the folders to replicate so that DFS-R can access it. I was trying to add SYSTEM in the security, but it won't find it/allow me. The folder has many many files and folders on the primary DFS pointer, but none on the 2nd, just created it with quite the same rights. Note that the primary DFS pointer is on a 2008 server and the DFS service and the secondary DFS pointer are on a 2008r2. Any help is very appreciated, thanks.

  Read the article

• Why do my proxy settings keep changing?

  - by tjrobinson

  I am running Windows 7 and a few times a day the "Use a proxy server for your LAN (These settings will not apply to dial-up of VPN connections)." under "Local Area Network (LAN) Settings" checkbox becomes checked seemingly on it's own. Am I pressing some kind of hidden keyboard shortcut accidentally? What sort of applications might alter this setting and why? Unfortunately as this is a developer box, there's a lot of stuff that could be interfering, e.g. Visual Studio 2010, Windows Azure SDK and various browsers. Has anyone else come across this?

  Read the article

• Slow Web Performance on two Windows 2008 R2 Terminal Servers

  - by Frank Owen

  We have two Windows 2008 R2 servers that we use for agents to log into to access our customers systems. Saturday morning we received complaints that on both servers the web is running horribly slow. This happens on all websites and the majority of the time the web site times out trying to load. Other users located at the same site but using their desktop machine do not see any issue. We have rebooted the boxes and checked settings and cannot find the cause. The CPU/Memory/Network/Disk Space use on the server is very low. I thought it might have been a MS update causing the issue but it appears the last update was applied in January. We have rebooted both boxes and I am in process of trying a different browser. Any ideas what could be causing this?

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system?

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• Domino 8.5.3: Modify Subject of Incoming Email

  - by Void

  I am a newbie in managing and development for Domino. Recently, I have request from other teams at work to set up a filter or agent for incoming mail. This is the requirement for the request: Look for Incoming Mail addressed to #CRITICAL (mutlipurpose, internal group containing a list of engineers) For mail matching Point 1, append "For Immediate Action: " to the front of the Subject Some restrictions I have: Only the Domino server is under my charge, not to touch on network-side or other servers No 3rd party software to be installed I have gone through the configurations in the Domino server and the closest thing I have to filtering Email is the Router/SMTP Restrictions... Rules. But this is not able to fulfill Point 2 in any way. Is this even possible using just Domino server settings, or through agents?

  Read the article

• How long can you be out of the MS market before it affects your career [closed]

  - by dave

  I've been working with .Net since it first came out and have done my best to use the latest and greatest things from Redmond. That being said, I've been working for the past year in the Python/Unix/Web world. In order to keep myself relevant in the MS world, I've been working part-time on a WPF project but I do not know how much longer that work will continue. So my question is: If I were to move totally to the Unix/Python/Web world, how long could I stay there before it starts getting hard to get another MS job? I am trying not to burn bridges in my career as I've found MS jobs pay better and tend to be more plentiful. PS: I like my Python job since it is something new and I get to work from home. It has provided a different view on coding that I've found useful. EDIT: I was out of the MS market for 12 months before attempting to get another MS job. No-one said "Gee you've been gone a while" but I did get a conspicuous lack of responses to job applications. My feeling is that the head-hunters do not bother to look beyond your last job. In the end, I got employment via my own network rather than the pimps. So, to answer my question: "not long, especially if you trust your career to head hunters."

  Read the article

• DB auto failover in c# does not work when the principal server physically goes offline

  - by user62521

  I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

  Read the article

• EC2 server in VPC stops responding joining domain

  - by Geoff

  We have a EC2 Windows Server set up and running in our VPC, connected to our network via a Juniper 5GT. This is working well, with the tunnel up and stable. If I then join the server to our local domain, it appears to work - I can then log on using domain credentials, and use domain accounts when applying security to folders etc. After I log out, if I give it around an hour, the box becomes unresponsive. I can't ping it, although a tracert goes all the way barring the last hop - so the tunnel is ok. I can't RDP into it. If I reboot it, then it works for a while before doing the same thing. Un-joining it from the domain fixes the problem, and it stays up and stable. The event logs don't show anything obvious, at least to me. Any ideas?

  Read the article

• Geekswithblogs.net Influencer Programm

  - by Staff of Geeks

  Recently, @StaffOfGeeks announced to a select group of bloggers, the Geekswithblogs.net Influencer Program.  Here is a little detail about the program. Description (from Influencer Page): Geekswithblogs.net is a community of bloggers passionate about contributing information to the world of developers and IT professionals. Our bloggers are some of the best in the world and receive honors on a regular basis for outside companies (such as the Microsoft© MVP Program). The Geekswithblogs.net Influencer Program is our way as Staff of Geeks to show our appreciation for those bloggers who have the greatest influence on the site. Each influencer in the program is awarded by the amount of posts, views, and comments they receive on their posts in the previous quarter. Each quarter, we select the top 25 bloggers of influence and give them special access to products and services we have obtained through our network of partners. Here is how it works.  Each quarter we select the top 25 bloggers bases on the amount of posts that created in that quarter, and apply points to the views and comments those posts receive.  The selection is purely off of the numbers, we do not select any based on any other basis.  In fact in the first round, several of our key bloggers did not qualify in the top 25.  Though they are still loved dearly, we wanted a program that anyone could be a part of if they put in the hard work. This said, the first quarter ends at the end of March and we will have another round of influencers joining us.  Keep the posts rolling and maybe you will be selected as an influencer! Visit the influencers page to see who has the greatest influence on Geekswithblogs right now.   Technorati Tags: Geekswithblogs

  Read the article

• Exchange 2010 - Trying to add an additional domain fails

  - by Tom Beech

  We're trying to add an additional domain to our existing exchange 2010 box. I'm doing this under our network administrator user which has pretty much every permission but i'm getting: VERBOSE: Connecting to EXCHANGE01.isd.isdevelopment.co.uk VERBOSE: Connected to EXCHANGE01.isd.isdevelopment.co.uk. [PS] C:\Windows\system32>new-AcceptedDomain -Name 'NewName' -DomainName 'newDomainaddress.com' -DomainType 'Autho ritative' Active Directory operation failed on DCSERVER01.isd.isdevelopment.co.uk. This error is not retriable. Additional inform ation: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BB9, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-AcceptedDomain], ADOperationException + FullyQualifiedErrorId : 282695C2,Microsoft.Exchange.Management.SystemConfigurationTasks.NewAcceptedDomain Any help will be appreciated. Tom

  Read the article

• Virtual Machine files on ramdisk doesn't run faster than on physical disk

  - by Landy

  I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

  Read the article

• IP assignment in a /28 block

  - by mks

  Need help on setting up firewall router. My config is as below: Public static network ID: x.x.x.48/28 gateway: x.x.x.49 available IP for the hosts: x.x.x.52 to 62 gw_eth0 <-- fw_eth0 - fw_eth1 <-- dmz_switch Four servers are connected on dmz_switch (say s1, s2, s3, s4) all have to use public static IP address from the above block. Any recommendation on IP assignment and route setup? Do I need to subnet the above block further or simply use /32 netmask and point-to-point static routes in the above setup?

  Read the article

• MSTSC Not working, disconnects shortly after connecting

  - by F4r-20

  I'm currently having a problem connecting remotely to a server. It is a brand new build Windows 2008 R2, remote users are enabled. I'm trying to connect from a Windows 7 machine. Everytime I remotely connect to the server it will stay connected for a matter of seconds (maybe 3-5) and then disconnect and I get the standard old cannot connect and list of reasons it could be. Then I cannot connect again and get this prompt until I restart the server. As soon as it's finished restarting, it happens all over again. The network and hardware configuration between the two machines is completely reliable. Does anybody know what else I could try? Thanks.

  Read the article

• Touchpad right click doesn't work on HP Envy 14 beats

  - by jdrageme01

  I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

  Read the article

• Ubuntu 12.04 server froze during the first boot after it was installed.

  - by user69021

  I installed Ubuntu server 12.04 to my new server and it failed on the first boot. It just stopped and I can't proceed any further. Server's specifications: Dell PowerEdge T620 CPU : Xeon E5-2665 2.4G x 2 RAM : 8GB RDIMM, 1333MHz x 12 HDD : 3TB Near Line SAS 7.2K x 8 RAID controller : PERC H710 GPU : NVIDIA Tesla C2075 x 4 I have a screenshot of the screen it stopped on but I cannot attach it because my privilege level is currently too low. ![freeze on boot][1] Here are the last messages while booting. [5.048743] Freeing unused kernel memory : 920k freed [5.049046] Write protecting the kernel read-only data : 12288k [5.052973] Freeing unused kernel memory : 1608k freed [5.056132] Freeing unused kernel memory : 1196k freed Loading, please wait... [5.070236] udevd[218]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [5.089030] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [5.089518] megasas: 0x1000:0x005b:0x1028:0x1f35: bus 1:slot 0:func 0 [5.089739] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [5.089937] megasas: FW now in Ready state [5.090427] dca service started, version 1.12.1 [5.091463] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [5.091578] Copyright (c) 2007-2011 Intel Corporation. [5.091712] igb 0000:06:00.0: PCI INT A -> GSI 16 (level,low) -> IRQ 16 [5.111090] megasas:IOC Init cmd success [5.123124] usb 1-1:new high-speed USB device number 2 using ehci_hcd What can I do about this?

  Read the article

• Google Chrome suspicious connections

  - by Poni

  I'm using Chrome at Windows and with TCPView (of the SysInternals freeware suit) I see that chrome.exe establish connections to these IPs: 173.194.37.104 209.85.146.138 Using http://www.ipaddresslocation.org/ I check about these IPs and see they're related to Google. Now, in order to clarify, these are the exact things I do: Open up chrome, the default page is set to BLANK (i.e no homepage whatsoever). Then I get into my website which has a blank page, so no "other" http requests are made. Right from this point there is a persistent connection, usually to '173.194.37.104'. What are these?? Very suspicious.. Edit #1: - I'm in 'incognito' mode right from start, when launching Chrome, using a shortcut with the '-incognito' switch. - I've turned off all phishing protections and other "advance" features in order to reduce Chrome's network activity.

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• It's Raining Solaris Training

  - by rajeshr

  That the popularity of Solaris 11 is only growing is clear from how regular the training sessions have been around this product. It's such an excitement to be going around sharing knowledge on Solaris, more so to explore the nitty gritty of many new and evolving features. Trust me, it's only getting better! In the process, just like in the past I stumbled on several individuals, each teaching me a lesson or two. I'm grateful. And if I've managed to get over the laziness to come back to the web logs with a collection of class photos from the last couple of months, it's because of a sense of gratitude to all 'em in the picture below. Solaris 11 Network Administration Pilot Teach in Bangalore. Sun Identity Manager (n.k.a Oracle Waveset IDM) Deployment Fundamentals Training. I'm missing from the snap because these delegates sat well over 10,000 Kms away from where I taught this class from, but were kind enough to help me associate a face with the voice by sending me a group photograph. If you want to attend one such OU program cutting down the travel, try OU's Live Virtual Class (a.k.a LVC) . Transition to Solaris 11 in Mumbai. Solaris 11 Advanced Administration Session in Bangalore. Transition to Solaris 11 in Mumbai. Attending Gary Riseborough's Exadata Training at Singapore. Solaris 11 Advanced Administration Session in Bangalore. If only the participants of each LVC session belonged to the same location, there would've been additional three group photographs occupying this space! Thank you everyone for many many memorable moments.

  Read the article

• iptables: limiting bytes downloaded per IP per day?

  - by Miles

  On a public-facing web server, I'd like to limit the total bytes downloaded per IP address per day. For example, after a visitor downloaded 100MB, any additional requests would be dropped or rejected for the next 24 hours. Is it possible to accomplish this using iptables alone? The connbytes, connlimit, hashlimit, quota, and recent options all look promising, but the man page plays its cards close to the vest (e.g., "quota - Implements network quotas by decrementing a byte counter with each packet. --quota bytes The quota in bytes."). Would like to avoid using a proxy (like Squid) if possible.

  Read the article

• Metro Apps on Windows 8 aren't working with static IP behind auth proxy

  - by Kamal

  In Windows 8 Professional, Metro Apps and Windows Update do not work with static IP settings behind authenticated proxy server. They work with DHCP on the same proxy settings (we have DHCP for wifi and static IP for LAN, both using the same proxy server). IE, Chrome and other desktop apps work nicely with both. Metro apps worked with an auth proxy (DHCP only), when I changed their proxy settings from the "edit group policy" option: Start → Settings → Edit Group Policy → Computer Configuration → Administrative Templates → Network Isolation → Internet Proxy for Apps How can I fix this?

  Read the article

• Auto log off windows machine after certain number of minutes

  - by Marty Heath

  I have three machines on my network, two are windows xp and one is windows 7. i would like to have all three machines log a user off if they are on for more than 60 minutes. And I would like this to be applied to the machine not on a per user basis, because I do not want this policy to apply to those users on any other machine. I have installed winexit.scr on one of the machines but the problem is that I cannot change the default value of 10 minutes for the screensaver because that is controlled through group policy, and I cannot seem to find where to change that through group policy on a per machine basis NOT on a per user basis. If I have left out any details I apologize please let me know anything that is needed

  Read the article

• Oracle Identity Management 11gR2 Live Event - New York

  - by Tanu Sood

    Are you in New York or the vicinity on September 6? If so, come join Amit Jasuja, Senior Vice President, Security and Identity Management at Oracle as he discusses the evolution of Oracle identity Management solutions and the business drivers (and industry trends) behind those. You have heard about some of the new experiences delivered with the latest release of Oracle Identity Management - simplified user experience, enhanced security and seamless enablement for secure cloud and mobile environments. Now come see it in action and hear what customers, your peers, are saying about their implementations. This forum will also be a great opportunity for you to connect directly with technology experts and network with industry professionals. There is still time left to register so book your space today. Registration details as well as the agenda for the day can be found here. We look forward to hosting you on Thursday, September 6th. Oracle Identity Management 11gR2 Live Event – New York Thursday, September 6, 2012 Oracle NYC Office 101 Park Avenue 4th Floor New York, NY 10178 Register Here Not in NY on Sep 6? Find an event near you in North America.

  Read the article

• Detect damage done by virus

  - by user38471

  Hey, this morning after I went to college a virus infected my pc without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagonosed with was "fakespypro" http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Win32%2fFakeSpypro on a fully updated windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appriciated.

  Read the article

< Previous Page | 542 543 544 545 546 547 548 549 550 551 552 553  | Next Page >