Search Results

Search found 18700 results on 748 pages for 'isolated network'.

Page 550/748 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• EMEA OTN Virtual Technology Summit - Hands-On Learning

  - by Thanos Terentes Printzios

  The Oracle Technology Network (OTN) is excited to invite you to our first Virtual Technology Summit. EMEA – Thursday July 10th / 9am to 1pm BST / 10am – 2pm CET / 12pm to 4pm MSK / GST - Register Now Learn first hand from Oracle ACEs, Java Champions, and Oracle product experts, as they share their insight and expertise on using Oracle technologies to meet today’s IT challenges. This interactive, online event offers four technical tracks, each with a unique focus on specific tools, technologies, and tips in these focus areas. Java – Big Trends and Technologies – Java lets you mine Big Data, build robust apps with HTML5, JavaScript and Java EE, and expand into the Internet of Things. Experts will present and you’ll be able to chat with them live online. Don’t miss out on this great opportunity to learn from some of the best minds in the Java community. Systems – OS Tips and Tricks for Sysadmins – Learn first hand how to configure Oracle Linux to run Oracle Database 11g and 12c, how to use the latest networking capabilities in Oracle Solaris 11, and how to troubleshoot networking problems in Unix and Linux systems. Database – Mastering Oracle Database Management & Development Techniques – Experts will present advanced features and management methods that will help you master your Oracle Database capabilities and drive greater performance, agility and manageability of your IT implementation. This track will build upon your skills with data management, migration, and performance. Middleware – The Architecture of Analytics: Big Time Big Data and Business Intelligence – This track will present a solution architect’s perspective on how business intelligence products in Oracle’s Fusion Middleware family and beyond fit into an effective big data architecture, and present insight and expertise from Oracle ACEs specializing in business Intelligence to help you meet your big data business intelligence challenges. This same content is being offered at 3 different dates listed below, at times convenient for all regions Americas - Wednesday July 9th EMEA – Thursday July 10th APAC English - July 16th 9am to 1pm PST12pm to 4pm  EST1 to 5 pm BRTRegister 9am to 1pm BST10am – 2pm CET12pm to 4pm MSK / GSTRegister IST – 10:00amSG – 12:30pmAEST – 2:30pmRegister The full event agenda is available at https://wikis.oracle.com/display/OTNVirtualTechSummit/Home

  Read the article

• Advice for migrating email server

  - by Chris Adams

  Hi there, I'm planning to migrate a Zimbra server with about 200gb of data from a server hosted in an office into a datacentre, to increase uptime (we've had a couple of outages when our network here started flaking out, and we have people in other countries relying on this server too). However, I'm not sure how best to migrate the data into the data centre without rendering the connection unusable during office hours, because there's far too much to send in over night over the two meg upstream connection we have here. I'm familiar with using tools like nice to stop a long running process degrading machine performance - is there a simple way to throttle a connection between office hours, so the long running transfer doesn't block the pipe, but then opens up outside of office hours to make the most of the bandwidth? I'm aware the alternative here is to simply mail a hard drive to the data centre, but I'd like to avoid doing that if I could. We're using Centos Linux for our servers, in the office and the datacentre, so extra points for an open source linux answer.

  Read the article

• How to force Windows 7 to ask for a "fresh" IP address from DHCP server?

  - by haimg

  I'm troubleshooting a certain issue with my DHCP configuration, and need my Windows machine to ask for a "fresh" IP address, so I can see which address DHCP server gives by default. When I do ipconfig /release followed by ipconfig /renew, Windows "proposes" its old IP address to the DHCP server (just checked with Wireshark, initial "DHCP Discover" message has Option-50 (requested IP address) with Windows machine's old IP). Tried disabling/enabling network adapter. Same behavior. Question: How can I force Windows to just ask for a new IP address, without proposing its old IP address.

  Read the article

• Friday Tips #6, Part 2

  - by Chris Kawalek

  Here is a question about updating Oracle VM: Question: How can I perform Oracle VM 3 server updates from Oracle VM Manager? Answer by Gregory King, Principal Best Practices Consultant, Oracle VM Product Management: Server Update Manager is a built-in feature of the Oracle VM Manager. Basically, Server Update Manager automatically configures YUM updates on all the Oracle VM Servers, pointing each to our Unbreakable Linux Network (ULN) update channel for Oracle VM. The servers periodically check with our Oracle YUM repository and notify the Oracle VM Manager that an update is available for each server. Actual server updates must be triggered by the Oracle VM administrator – they are not executed automatically. At this point, you can use the Oracle VM Manager to put a server into maintenance mode which live migrates all the running Oracle VM Guests to other Oracle VM Servers in the server pool. Once all the Oracle VM Guests have been migrated, the Oracle VM administrator can trigger the update on the server. The entire process is documented in the Installation and Upgrade Guide of Oracle VM Documentation so I won’t spend time detailing the steps. However, configuring the Server Update Manager is exceedingly simple. Simply navigate to the Tools and Resources tab in the Oracle VM Manager, select the link for Server Update Manager and ensure the following values are added to the text boxes as shown in the illustration below: YUM Base URL: http://public-yum.oracle.com/repo/OracleVM/OVM3/latest/x86_64 YUM GPG Key: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Every server in the pool will be automatically configured for YUM updates once you choose the Apply button. Many thanks to Greg and Rick for providing the answers to this week's questions. If you want to ask us something, hit up Twitter and use hashtag #AskOracleVirtualization. See you next week! -Chris 

  Read the article

• Windows 7 can't copy file - Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved

  - by JJGroover

  Any attempt to copy files larger than about 40 MB from a network share (a SAN running open filer / Samba) to my local machine running Windows 7 always results in the following error and the copy fails: Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved. I've tried copying to my C: drive and a USB drive with the same results. Smaller files copy just fine. Clearly 40 MB is not that big of a file so I'm assuming it is some buggy interaction between windows 7 and Samba perhaps. Google has so far turned up nothing. Can anyone point me in the right direction?

  Read the article

• Why do my proxy settings keep changing?

  - by tjrobinson

  I am running Windows 7 and a few times a day the "Use a proxy server for your LAN (These settings will not apply to dial-up of VPN connections)." under "Local Area Network (LAN) Settings" checkbox becomes checked seemingly on it's own. Am I pressing some kind of hidden keyboard shortcut accidentally? What sort of applications might alter this setting and why? Unfortunately as this is a developer box, there's a lot of stuff that could be interfering, e.g. Visual Studio 2010, Windows Azure SDK and various browsers. Has anyone else come across this?

  Read the article

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

• Windows 7 PC browsers having trouble to open certain sites but not others

  - by user55345

  Hi, My Win7 PC these days acting very weird: Examples: It can not open bing.com, alexa.com, msdn.microsoft.com (blank page or page can not be found); It can open zdnet.com but lost all CSS layouts and pictures; It can open stackoverflow and Google no problem; I tried all three browsers (IE8, Chrome, Firefox 3.6) same thing. I didn't change anything on this PC in days. This PC does have Anti-Virus installed and updated. I'm also pretty sure it's not a network problem, because my other laptops are just fine at the same time. The only thing I can think of is it might be some auto-update stuff underneath happened without my knowledge, but I have no idea where to troubleshoot? Please shed some lights for me? Thanks a lot.

  Read the article

• Cisco 1841 Box and Watchguard XTM21-W

  - by Corey

  I have never set one of these up before and need a little assistance. Right now we have a T1 line coming in from Sprint to a Cisco 1841 and then on to our router. However, when I plug the Cisco 1841 into Port 0 and the router into Port 3 it does not work. In Port 1 I have my management computer plugged in. We have one subnet and this must be easy but I cannot figure out how to make this work. When the firewall is plugged in then I get no internet or network access.

  Read the article

• How to document requirements for an API systematically?

  - by Heinrich

  I am currently working on a project, where I have to analyze the requirements of two given IT systems, that use cloud computing, for a Cloud API. In other words, I have to analyze what requirements these systems have for a Cloud API, such that they would be able to switch it, while being able to accomplish their current goals. Let me give you an example for some informal requirements of Project A: When starting virtual machines in the cloud through the API, it must be possible to specify the memory size, CPU type, operating system and a SSH key for the root user. It must be possible to monitor the inbound and outbound network traffic per hour per virtual machine. The API must support the assignment of public IPs to a virtual machine and the retrieval of the public IPs. ... In a later stage of the project I will analyze some Cloud Computing standards that standardize cloud APIs to find out where possible shortcomings in the current standards are. A finding could and will probably be, that a certain standard does not support monitoring resource usage and thus is not currently usable. I am currently trying to find a way to systematically write down and classify my requirements. I feel that the way I currently have them written down (like the three points above) is too informal. I have read in a couple of requirements enineering and software architecture books, but they all focus too much on details and implementation. I do really only care about the functionalities provided through the API/interface and I don't think UML diagrams etc. are the right choice for me. I think currently the requirements that I collected can be described as user stories, but is that already enough for a sophisticated requirements analysis? Probably I should go "one level deeper" ... Any advice/learning resources for me?

  Read the article

• Blurry printed raster images with Brother MFC-8840D

  - by Adam Monsen

  (NOTE: crossposted here: ubuntuforums.org/showthread.php?t=1621795) I've got a Brother MFC-8840D. Works great with Ubuntu server! Setting up a CUPS print server was pretty straightforward, and I also finally got network scanning working reliably with saned. Printing documents and Web pages works well: fonts are crisp/clear, etc. One issue has got me completely vexed: printing raster (ie: JPG) images. They are blurry. For example, I can scan a page of black and white text at 150 or 300 dpi. The grayscale image looks perfect on my monitor. But the printed version is much blurrier than the original, regardless of the "print resolution" dpi I choose. As a counterexample, if I use the "copy" function of the MFC-8840D, the copy looks excellent, and this function is much, much faster than if I scan then print a scan of same. I've googled around a bunch and tried different tricks (printing a PDF with the image from evince, printing with Gimp, EOG and other applications) but I just can't print anything that looks as good as a copy made with the MFC-8840D. Any ideas? I'm using Ubuntu 10.04.1 LTS server. I'm using the PPD file from solutions.brother.com. Thanks, -Adam

  Read the article

• Erlang node acts like it connects, but doesn't [migrated]

  - by Malfist

  I'm trying to setup a distributed network of nodes across a few firewalls and it's not going so well. My application is structured like this: there is a central server that always running a node ([email protected]) and my co-worker's laptops connect to it on startup. This works if we're all in the office, but if someone is at home, they can connect to the masternode, but they fail to connect to the other nodes in the swarm. I.E., erlang fails to gossip correctly. To correct this, I've change epmd's port number and changed the inet_dist_listen ports to a known open port (1755 and 7070 respectively). However, something fishy is going on. I can run net_adm:world() and it reports that it connects to master node, but when I run nodes() I get an empty array. Same with net_adm:ping('[email protected]'). See: Eshell V5.9 (abort with ^G) ([email protected])1> net_adm:world(). ['[email protected]'] ([email protected])2> nodes(). [] ([email protected])3> net_adm:ping('[email protected]'). pong ([email protected])4> nodes(). [] ([email protected])5> What's going on, and how can I fix it?

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• ExaLogic virtual datacenter live at Qualogy

  - by JuergenKress

  Just a quick post to celebrate another siginificant milestone for Exalogic! After a few days of preparations and some hard work we succeeded in upgrading our Exalogic quarterrack to the newly released Elastic Cloud version 2.0.1.1.0. This version was just recently released on July 25th. This new version turns your Exalogic into a virtual datacenter with many very neat cloud provisioning capabilities. There are many more possibilities in this version to provide strict network and vServer group isolation where needed and it helps you manage multitenancy and delegate your cloud administration. How did we fare? Apart from some small inconveniences and minor issues I can tell you it all went remarkably well, provided you do proper homework on the prerequisite requirements and you stick to the instructions all the way through (there’s some 37 steps to cover). We as a specialized Exalogic partner had early access to this version and did some early adopter work. As a customer this is all done for you as Oracle will deliver a new Exalogic with this version from the factory if you so desire, or upgrade your current ones. O fcourse, Qualogy can do this for you as well! Interested contact the Qualogy team [email protected]! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: ExaLogic,Qualogy,ExaLogic demo,Exalogic datacenter,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Lagging digital tv over ethernet

  - by Steve

  I have a HD Home Run TV over ethernet device, which connects the aerial to my router, and from there the router connects to my PC over about 15m of 100Mbps ethernet cable. The TV output lags every second. It does not do so for a computer much closer to the router. It is odd to me that the network rate is around 7Mbps on a 100Mbps cable. I am not downloading or streaming anything else on the affected computer. Is this lag caused by the speed of the cable, the length of the cable, or interference on the cable? I am considering swapping the ethernet cable with shielded ethernet cable.

  Read the article

• How to SSH an outside server from a computer which is behind a proxy firewall ?

  - by Karan

  I access the Internet through an HTTP proxy firewall at college. And I need to login to a computer, via SSH, which is outside our network. I tried it as Linux command and on Windows using PuTTY. I also configured PuTTY to use our server's address. But still, "Proxy error: 403 forbidden" pops up. They must've blocked SSH access to outside systems. (college systems as accessible). I can SSH a web server (not the proxy server) at the college, which I use to browse proxy-free by tunneling. Now this server allows to browse restricted sites, but still no SSH. Any workaround, please?

  Read the article

• Sharing VPN from XP to Linux virtual

  - by user55513

  Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

  Read the article

• Java Embedded @ JavaOne Call for Papers

  - by arungupta

  Do you care about Internet of Things ? Interested in sharing your experience at javaOne about how you are using Java Embedded Technology to realize this vision ? At Java Embedded @ JavaOne, C-level executives, architects, business leaders, and decision makers from around the globe will come together to learn how Java Embedded technologies and solutions offer compelling value and a clear path forward to business efficiency and agility. The conference will feature dedicated business-focused content from Oracle discussing how Java Embedded delivers a secure, optimized environment ideal for multiple network-based devices, as well as meaningful industry-focused sessions from peers who are already successfully utilizing Java Embedded. Submit your papers for Business Track or Technical Content related to Embedded Java to be presented at JavaOne here. Speakers for accepted sessions will receive a complimentary pass to the event for which their session is submitted. Note, the CFP for the main JavaOne conference is over, speakers notified, and content catalog published. This is CFP only for Java Embedded @ JavaOne. Some key dates are: Jul 8th: Call for Papers closes Week of Jul 29th: Notifications sent Conference Dates: Oct 3, 4, 2012 And the main conference website is oracle.com/javaone/embedded.

  Read the article

• Mount CIFS share with autofs

  - by Phanto

  I have a system running RHEL 5.5, and I am trying to mount a Windows share on a server using autofs. (Due to the network not being ready upon startup, I do not want to utilize fstab.) I am able to mount the shares manually, but autofs is just not mounting them. Here are the files I am working with: At the end of /etc/auto.master, I have: ## Mount this test share: /test /etc/auto.test --timeout=60 In /etc/auto.test, I have: test -fstype=cifs,username=testuser,domain=domain.com,password=password ://server/test I then restart the autofs service. However, this does not work. ls-ing the directory does not return any results. I have followed all these guides on the web, and I either don't understand them, or they.just.don't.work. Thank You

  Read the article

• Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

  - by ubunsteve

  I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

  Read the article

• Windows Virtual PC File Copy from host very slow

  - by Shiv Kumar

  I have a Windows 7 desktop on which I've installed Windows Virtual PC and an instance Windows 7. I also have virtual XP instance on the same host. The problem I am having is that copying files from the host to the virtual machine is dog slow. I'm talking 17KB/sec. The host machine has a gigbit NIC. While using the XP virtual instance to do the same I didn't notice a huge difference but on the Window 7 virtual instance the time is really slowing me down. Is there something I need to do (settings) to fix this? I've attached an image of the Resource monitor (of the virtual Windows 7 instance) that shows my network traffic going in bursts rather than relatively steady. The files are on a "public" folder on my host machine.

  Read the article

• Connecting switch to switch to router

  - by elated

  Hello, Not sure if this is the right place to ask this question. But I have a router which connects to the internet. Now I have a switch connected to this router. I added a lot more computers so I added another switch and connected it to the first switch using a cross-over cable. As soon as I connect it to the first switch, my lights in first switch start blinking like crazy and my entire network simply stops working. The minute I remove the second switch's wire, its all fine again. What could be the problem?

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >