Search Results

Search found 18700 results on 748 pages for 'isolated network'.

Page 551/748 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >

• Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

  - by ubunsteve

  I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

  Read the article

• What's the fastest way to store/access large files?

  - by philfreo

  I do a lot of video editing on my Mac and need a way to store very large (30 GB) files, and don't have room on my HD. A USB/Firewire external hard drive would work, but it seems way too slow for consistently working with such large files. I've also considered buying another computer, with a large hard drive, and putting it on the same network with a shared folder. What's the fastest / most efficient way to do this? Please consider USB 2.0 speeds, hard drive read times, ethernet speeds, etc. Are there other options I should consider?

  Read the article

• Java Embedded @ JavaOne Call for Papers

  - by arungupta

  Do you care about Internet of Things ? Interested in sharing your experience at javaOne about how you are using Java Embedded Technology to realize this vision ? At Java Embedded @ JavaOne, C-level executives, architects, business leaders, and decision makers from around the globe will come together to learn how Java Embedded technologies and solutions offer compelling value and a clear path forward to business efficiency and agility. The conference will feature dedicated business-focused content from Oracle discussing how Java Embedded delivers a secure, optimized environment ideal for multiple network-based devices, as well as meaningful industry-focused sessions from peers who are already successfully utilizing Java Embedded. Submit your papers for Business Track or Technical Content related to Embedded Java to be presented at JavaOne here. Speakers for accepted sessions will receive a complimentary pass to the event for which their session is submitted. Note, the CFP for the main JavaOne conference is over, speakers notified, and content catalog published. This is CFP only for Java Embedded @ JavaOne. Some key dates are: Jul 8th: Call for Papers closes Week of Jul 29th: Notifications sent Conference Dates: Oct 3, 4, 2012 And the main conference website is oracle.com/javaone/embedded.

  Read the article

• Windows Virtual PC File Copy from host very slow

  - by Shiv Kumar

  I have a Windows 7 desktop on which I've installed Windows Virtual PC and an instance Windows 7. I also have virtual XP instance on the same host. The problem I am having is that copying files from the host to the virtual machine is dog slow. I'm talking 17KB/sec. The host machine has a gigbit NIC. While using the XP virtual instance to do the same I didn't notice a huge difference but on the Window 7 virtual instance the time is really slowing me down. Is there something I need to do (settings) to fix this? I've attached an image of the Resource monitor (of the virtual Windows 7 instance) that shows my network traffic going in bursts rather than relatively steady. The files are on a "public" folder on my host machine.

  Read the article

• Apache DVB http video Streaming bandwidth or priority problem

  - by igino manfre'

  I'm streaming few precompressed DVB videos from cloud. The streams are generated from VLC on "impossible" ports (such as 64085, 64086 etc) reverse proxed by Apache on port 80 and 8080. All the generated streams are listed in "http://95.110.164.61/indexv.html". From an ADSL connection with enough downlink bandwidth, recalling the stream generated by VLC (such as "http://95.110.164.61:64087/mpg2_6.4") it flows fluently. Recalling the same stream proxed by Apache ("http://95.110.164.61/mpg2_6.4") the stream stops and goes. The only situation in which the Apache proxed streams flow regularly is from a site connected through 64 Mbps warranted bandwith with RTT to the server less than 10 mseconds. Please note that streams below 2 Mbps are fluently proxed. The system is a single core xeon with windows 2008 R2 on 4 GB of RAM with 1 Gbps of network bandwidth. The drain of computational and bandwidth resources is negligeable, the RAM usage always lower than 50%. On the system I run many VLC streamers. Any of them drains a variable amount of RAM (from about 25 to 70 MB). On the contrary the couple of httpd.exe processes drain no more than 7 MB. Using Wireshark (on the server) I see that VLC directy send to the client much more packets than Apache, and the stream is framgmented on many frames. I'm not a programmer, a newby of Apache. Can anyone please address me to a specific portion of the Apache's huge documentation? Thank you. igino

  Read the article

• Regression testing for firewall changes

  - by James C

  We have a number of firewalls in place around our organisation and in some cases packets can pass through four levels of firewall limiting the flow TCP traffic. A concept that I'm used to from software testing is regression testing, allowing you to run a test suite against a changed application to verify that the new changes haven't affected any old features. Does anyone have any experience or an offer any solutions to being able to perform the same type of thing with firewall changes and network testing? The problem becomes a lot more complicated because you'd ideally want to be originating (and testing receipt) of packets across many machines.

  Read the article

• SFTP through proxy

  - by aerodynamic_props

  I have a large amount of data on scratch space at computer b that I want to get. In my network I cannot directly connect to computer b (ssh exits with "No route to host"); I must first connect to computer a, and then connect to computer b. I cannot move the data from the scratch space on computer b to computer a because of a disk quota that is imposed on me at computer a. How can I move the data from computer b to my computer in this situation?

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• help download and install and save and use my wireless stick modem and software

  - by ADAM

  i installed Linux Ubuntu after my win os went totally dead by fatal blue screen. cannot reboot or install form CD ROM or get safe mode i installed Linux Ubuntu i still unable to install my wireless stick usb modem to connect and surf the Internet wireless form my provider. i use wireless network from neighborhood And i find it difficult to download and install and save porg and application from the INTERNET like skype and real player and others. it is different form windows and not that easy to use. i click to download for example and find real player but when click on it it opens as text file only and i cannot use it as it should be used for video and download and record from you tube. how to do it. and is there with Linux Ubuntu similar prog to download and record and save from you tube as in windows? Is there any trick to restart or reboot windows OS from the dead. can i use linux to reboot windows or to import my files from the blue screen stopped windows7? Any help is highly appreciated. thanks please email me to : [email protected]

  Read the article

• 12.04 disabling wireless via dbus does not work

  - by FlabbergastedPickle

  I am using a proprietary rt3652sta driver for my wireless card. It appears as a ra0 device on the 64-bit Ubuntu 12.04. According to the online documentation the following used to work definitely up to 10.04. dbus-send --system --type=method_call --dest=org.freedesktop.NetworkManager /org/freedesktop/NetworkManager org.freedesktop.DBus.Properties.Set string:org.freedesktop.NetworkManager string:WirelessEnabled variant:boolean:false This however has no effect on the aforesaid wireless card in 12.04. Also, rfkill does not work as it does not even list the wireless button (again, likely due to the wireless driver being proprietary): rfkill list It only lists the hci0 (bluetooth) one and one can block/unblock it accordingly but this has no effect on the wifi. ifup/down also does not work (AFAICT)... And this leaves me with disabling wireless through the network manager applet. However, trying to do so via dbus appears not to work and yet I would like to automate it via a script. Any ideas how I could find out the proper dbus structure for the call? Is this even possible in Ubuntu 12.04?

  Read the article

• Windows 8 mail cause event 529 when connect to exchange

  - by holian

  I set my company exchange mailbox in Windows 8.1 mail. (outsite). Everything works fine, but after i start the Windows 8.1 mail i get event with id 529 in the security log continously. Reason: Unknown user name or bad password Username: [email protected] range: Type of login: 8 Logon Process: Advapi Authentication Package: Negotiate Workstation Name: SERVERNAME Caller User Name: SERVERNAME $ Calling range BAR NUL Caller Logon ID: (0x0, 0x3E7) Caller Process ID: 4384 Transmitted services: - Source Network Address: 56.43.213.122 Source Port: 55 698 If i close windows mail, events stop flooding the security log in the server. Connection parameters in windwos 8: email:[email protected] password domain:company.local username:myemail server:mydomain.dyndns.org SSL:yes. Any idea whats the problem? I can check my mail, with the same setting on my android phone without any problem. Thank you

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system?

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• How can Facebook's session get mixed up because of NAT and/or Proxy

  - by Alex

  Have received some reports from a customer (a very large company) they reported issues from clients who are using Facebook. These clients claim that once in a while when they log in to Facebook they end up in someone else's session. I know that network is NATed then Proxied before getting to Facebook.com. Although I'm not able to explain how this issue can occur. Is it possible that the Proxy is not sending the right session back to the clients? How can they end up with someone else's session since Facebook is cookie based session?? Anyone seen this before?

  Read the article

• No Wireless In Ubuntu 13.10

  - by viktorhubinette

  When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Systemd can't start script?

  - by TokyoMEWS

  I have a BASH-script I want to run on start up. My system is running systemd so I created a .service file with whith what I think is the neccessary information: [Unit] Description=My Script After=network.target [Service] ExecStart=/home/myscript.sh [Install] WantedBy=multi-user.target I used systemctl enable to 'register' it an rebooted. On boot I was told my script would be executed, but I could neither see any of the messages ECHO should display on screen nor did it write something to a file, according to what I had written in the script. Additionally, It does not start the application it's supposed to start. Systemctl status tells me that the script has run and exited successfully. Still, the script has no effect. If I run the script from a shell it works perfectly fine. Do any of you know what could be my problem?

  Read the article

• Hosting services on ubuntu server VM

  - by Trevor Hartman

  I've got OSX Server running on a macbook, and I'm looking to run an ubuntu server VM on it via Parallels. I'm thinking about hosting all my apache inside linux, and possibly some other services. I'm curious what a viable config would be, having not done this before. I need to do bridged network right? How do I direct web traffic to the VM instead of OSX? Haven't got my head wrapped around how this works yet so any help would be appreciated.

  Read the article

• Restarted computer, now wireless and Visual Studio is broken

  - by Earlz

  I installed the new update for TortoiseSVN which requires a restart. Upon restarting a lot of things broke. I'm currently running a virus scan, but what would cause this? Among the things that no longer work is Visual Studio. It now says "Invalid License Data. A reinstall is required" and my wireless internet does not work. When I go to connect to my network it will say "Can not connect" and then when I diagnose the problem it says "The connection to accesspoint-name was cancelled" (and yes, canceled is misspelt like that) What could have caused this? My computer did not install any updates or anything like that upon restarting and it was running fine before I restarted it.

  Read the article

• "The protocol 'net.msmq' is not supported."

  - by Randolpho St. John

  OMG, a new lesson! Will wonders never cease? So I ran into an interesting issue setting up a WCF service to consume an MSMQ queue. I won't bother you with the details of how to actually build a WCF/MSMQ service; there are plenty of tutorials on the subject. I want to share with you an interesting error that I ran into and the surprisingly simple fix. The error occurs when attempting to generate a Service Reference or even simply browsing to the WSDL of your WCF/MSMQ service in the form of a YSOD with the following error: "The protocol 'net.msmq' is not supported." After a lot of Googling on the subject turning up plenty of questions with the same error but no answers. So I went digging into some application level config files on a server that already had a WCF/MSMQ service successfully set up by the network admin, and the answer was amazingly simple: If you are hosting an MSMQ/WCF service in IIS, you have to tell IIS to allow net.msmq protocol. It's in the advanced settings for the application or site in which you are hosting the service. .... aaaand, that's it.

  Read the article

• What are the hard and fast rules for Cache Control?

  - by Metalshark

  Confession: sites I maintain have different rules for Cache Control mostly based on the default configuration of the server followed up with recommendations from the Page Speed & Y-Slow Firefox plug-ins and the Network Resources view in Google's Speed Tracer. Cache-Control is set to private/public depending on what they say to do, ETag's/Last-Modified headers are only tinkered with if Y-Slow suggests there is something wrong and Vary-Accept-Encoding seems necessary when manually gziping files for Amazon CloudFront. When reading through the material on the different options and what they do there seems to be conflicting information, rules for broken proxies and cargo cult configurations. Any of the official information provided by the analysis tools mentioned above is quite inaccessible as it deals with each topic individually instead of as a unified strategy (so there is no cross-referencing of techniques). For example, it seems to make no sense that the speed analysis tools rate a site with ETag's the same as a site without them if they are meant to help with caching. What are the hard and fast rules for a platform agnostic Cache Control strategy? EDIT: A link through Jeff Atwood's article explains Caching in superb depth. For the record though here are the hard and fast rules: If the file is Compressed using GZIP, etc - use "cache-control: private" as a proxy may return the compressed version to a client that does not support it (the browser cache will hold files marked this way though). Also remember to include a "Vary: Accept-Encoding" to say that it is compressible. Use Last-Modified in conjunction with ETag - belt and braces usage provides both validators, whilst ETag is based on file contents instead of modification time alone, using both covers all bases. NOTE: AOL's PageTest has a carte blanche approach against ETags for some reason. If you are using Apache on more than one server to host the same content then remove the implicitly declared inode from ETags by excluding it from the FileETag directive (i.e. "FileETag MTime Size") unless you are genuinely using the same live filesystem. Use "cache-control: public" wherever you can - this means that proxy servers (and the browser cache) will return your content even if the rest of the page needs HTTP authentication, etc.

  Read the article

• Moving files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to move it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public Update: Sorry, I actually mean "move" all the way... so it is not copy but move. So that's why I thought it should take 2, 3 seconds only.

  Read the article

• Do support sites like Stack Overflow upset the paid-support open source model?

  - by ajax81

  In order to stay relevant in the marketplace, I'm researching new business models for my software company. The open source model with paid support seems like a good fit for our product, but I have concerns about whether or not a paid support model is viable in an era where top-notch help is readily available for free on sites like those in the Stack Exchange network. Case in point -- I moved my employees to Ubuntu last year because I didn't want to pay for Win 7 licenses and new hardware (plus, the mono platform was highly attractive). My staff had no Linux experience, but were able to achieve relative competency in about 120 days with the help of AskUbuntu, Stack Overflow, and a few "For Dummies" books. We did employ an Ubuntu consultant for 7 days to provide training and support, but beyond that spent $0.00 on any kind of paid expertise. In regards to my due diligence, I ran a 3 month beta of the freemium-paid-support model with one of our smaller customers, and achieved mediocre results. I'd like to think its because our software is so stable and easy to use that the customer didn't need much paid support, but I suspect that they circumvented the terms of our SLA in the same manner that we did with the move to Ubuntu. Does anyone out there has any thoughts, advice, or experience relevant to the move I'm considering? What worked, what didn't, etc?

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• Broadcom BCM4313 takes ages to connect

  - by Drazgo

  I'm having issues with my broadcom BCM4313 wireless adapter. Everything works just fine when connected (with additional drivers & Connman), but it takes about 5 minutes to connect to my network when i just started my computer! When resuming from hibernation it goes very quick though, so just when I boot my pc it's taking forever... This is what I found in the dmesg output: [ 16.778057] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 [ 16.808768] type=1400 audit(1295859939.727:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=833 comm="apparmor_parser" [ 16.808815] type=1400 audit(1295859939.727:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=799 comm="apparmor_parser" [ 16.808825] type=1400 audit(1295859939.727:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=826 comm="apparmor_parser" [ 16.809367] type=1400 audit(1295859939.727:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser" [ 16.809415] type=1400 audit(1295859939.727:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=799 comm="apparmor_parser" [ 16.809435] type=1400 audit(1295859939.727:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=826 comm="apparmor_parser" [ 16.809705] type=1400 audit(1295859939.727:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser" [ 16.809755] type=1400 audit(1295859939.727:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=799 comm="apparmor_parser" [ 16.809769] type=1400 audit(1295859939.727:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=826 comm="apparmor_parser" [ 16.844083] alloc irq_desc for 22 on node -1 [ 16.844087] alloc kstat_irqs on node -1 Any ideas how come? Thanks in advance!

  Read the article

• Airport Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• Can Dungeons & Dragons Make You More Successful? [Video]

  - by Jason Fitzpatrick

  Dungeons & Dragons gets a bit of a bad rap in popular culture, but in this video treatise from Idea Channel, they propose that Dungeons & Dragons wires players for success. There are some deeply ingrained stereotypes about Dungeons & Dragons, and those stereotypes usually begin and end with people shouting “NERD!!!” But the reality of the D&D universe is a whole lot more complex. Rather than being an escape from reality, D&D is actually a way to enhance some important real life skillz! It’s a chance to learn problem solving, visualization, interaction, organization, people management… the list could go on and on. Plus, there are some very famous non-nerds who have declared an affinity for D&D, so best stop criticizing and join in if you want to be a successful at the game of life. While we’re trying not to let our love of all things gaming cloud our judgement, we’re finding it difficult to disagree with the premise that open-ended play fosters creative and adaptive thinking. Can Dungeons & Dragons Make You A Confident & Successful Person? [via Boing Boing] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >