Search Results

Search found 7114 results on 285 pages for 'auto'.

Page 55/285 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Multi subnet in ubuntu with dnsmasq

  - by Fox Mulder

  I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

  Read the article

• WPF Templates error - "Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw

  - by jasonk

  I've just started experimenting with WPF templates vs. styles and I'm not sure what I'm doing wrong. The goal below is to alternate the colors of the options in the menu. The code works fine with just the , but when I copy and paste/rename it for the second segment of "MenuChoiceOdd" I get the following error: Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw an exception. Sample of the code: <Window x:Class="WpfApplication1.Template_Testing" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Template_Testing" Height="300" Width="300"> <Grid> <Grid.Resources> <ControlTemplate x:Key="MenuChoiceEven"> <Border BorderThickness="1" BorderBrush="#FF4A5D80"> <TextBlock Height="Auto" HorizontalAlignment="Stretch" Margin="0" Width="Auto" FontSize="14" Foreground="SlateGray" TextAlignment="Left" AllowDrop="True" Text="{Binding Path=Content, RelativeSource={RelativeSource TemplatedParent}}"> <TextBlock.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="White" Offset="0" /> <GradientStop Color="#FFC2CCDB" Offset="1" /> </LinearGradientBrush> </TextBlock.Background> </TextBlock> </Border> </ControlTemplate> <ControlTemplate x:Key="MenuChoiceOdd"> <Border BorderThickness="1" BorderBrush="#FF4A5D80"> <TextBlock Height="Auto" HorizontalAlignment="Stretch" Margin="0" Width="Auto" FontSize="14" Foreground="SlateGray" TextAlignment="Left" AllowDrop="True" Text="{Binding Path=Content, RelativeSource={RelativeSource TemplatedParent}}"> <TextBlock.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="White" Offset="0" /> <GradientStop Color="##FFCBCBCB" Offset="1" /> </LinearGradientBrush> </TextBlock.Background> </TextBlock> </Border> </ControlTemplate> </Grid.Resources> <Border BorderBrush="SlateGray" BorderThickness="2" Margin="10" CornerRadius="10" Background="LightSteelBlue" Width="200"> <StackPanel Margin="4"> <TextBlock Height="Auto" HorizontalAlignment="Stretch" Margin="2,2,2,0" Name="MenuHeaderTextBlock" Text="TextBlock" Width="Auto" FontSize="16" Foreground="PaleGoldenrod" TextAlignment="Left" Padding="10" FontWeight="Bold"><TextBlock.Background><LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"><GradientStop Color="LightSlateGray" Offset="0" /><GradientStop Color="DarkSlateGray" Offset="1" /></LinearGradientBrush></TextBlock.Background></TextBlock> <StackPanel Height="Auto" HorizontalAlignment="Stretch" Margin="2,0,2,0" Name="MenuChoicesStackPanel" VerticalAlignment="Top" Width="Auto"> <Button Template="{StaticResource MenuChoiceEven}" Content="Test Even menu element" /> <Button Template="{StaticResource MenuChoiceOdd}" Content="Test odd menu element" /> </StackPanel> </StackPanel> </Border> </Grid> </Window> What am I doing wrong?

  Read the article

• Ubuntu 11.04 VM shows a black screen in VMware Player

  - by Roel Veldhuizen

  I have a Ubuntu Server 11.04 64 bit VM running on VMware Player 3.1.4 that only shows a black screen. No matter what I try, the screen remains black. The VM has worked the first time. When I reset the machine, it shows the VMware loader and a flickering _ for about a second. Then the screen turns black again. VM settings: Memory: 512MB Processors: 1 HD: 20GB CD: auto detect Floppy: auto detect Network adapter: NAT USB controller: present soundcard: auto detect printer: present display: auto detect I just created a fresh VM and the same happens, so it seems that the problem is consistent.

  Read the article

• Getting Perl DBD::mysql working on OS X 10.7?

  - by Bart B

  I can't seem to get Perl & MySQL to talk to each other on OS X 10.7 Lion. I did all the installs by the book, I used Oracle's PKG installer for the latest MySQL Community Server, and I installed DBI and DBD::mysql via CPAN. There were not problems at all during the install, but, when I try to USE DBD::mysql to connect to my local DB server I get the following error: install_driver(mysql) failed: Can't load '/Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle' for module DBD::mysql: dlopen(/Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle, 1): Library not loaded: /usr/local/mysql/lib/libmysqlclient.16.dylib Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Reason: image not found at /System/Library/Perl/5.12/darwin-thread-multi-2level/DynaLoader.pm line 204. at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a required shared library or dll isn't installed where expected After a lot of googling all I could find were suggested hacks, so I gave this one a go: http://arkoftech.wordpress.com/2011/02/10/fixing-dbdmysql-for-mysql-5-5-89-under-macos-10-6-x/ I had to update some of the paths in the instructions since on Lion it's Perl 5.12 not 5.10. After doing that I got a new error: dyld: lazy symbol binding failed: Symbol not found: _mysql_init Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Expected in: flat namespace dyld: Symbol not found: _mysql_init Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Expected in: flat namespace Trace/BPT trap: 5 There must be a simple way to get MySQL & Perl working on OS X? - HELP!

  Read the article

• HP ProCurve Port Mode Configuration Question

  - by SvrGuy

  We have a ProCurve Switch 2810-48G (J9022A). We need to disable auto negotiation on two ports and manually configure them to be full duplex gige ports. From the web GUI, Configuration Tab, Port Configuration sub tab, I am only presented with the option to configure the port as Auto - 1000. I take this to mean, auto negotiate duplex, manually configure the speed to be gige. How do I manually configure the port such that it is manually configured to use full duplex, 1000 mbs?

  Read the article

• Unable to get ls to recognise LS_OPTIONS or LS_COLORS?

  - by A T

  Trying to get --color=auto as the default ls argument. $ ls --version ls (GNU coreutils) 8.21 … $ echo $LS_COLORS no=00:fi=00:di=00;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=00;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35: $ echo $LS_OPTIONS --color=auto Unfortunately when I run ls I still get non-colored output (running ls --color=auto manually gives me colors). How do I make --color=auto a default ls argument?

  Read the article

• Using Office 2003 normal.dot in Office 2010?

  - by TJ

  I have a user who I have upgraded from office 2003 to Office 2010. This user relies on his custom auto correct that he built into his normal.dot file for Word 2003. He would not like to have to reenter all 200 of his auto corrects. How can I convert his old Normal.dot file with auto corrects to the new Normal.dot for Office 2010?

  Read the article

• HP ProCurve Port Mode Configuration Question Mark 2

  - by SvrGuy

  We have a ProCurve Switch 2810-48G (J9022A). We need to disable auto negotiation on two ports and manually configure them to be full duplex gige ports. From the web GUI, Configuration Tab, Port Configuration sub tab, I am only presented with the option to configure the port as Auto - 1000. I take this to mean, auto negotiate duplex, manually configure the speed to be gige. From the CLI when I try to set 1000-full I get the following error: Value 1000-full is not applicable to port 39 (or whatever port I try) The exact commands I have entered are: config interface 39 speed-duplex 1000-full BTW: speed-duplex auto-1000 works ( I also tried full-1000 and that did not work either) How do I manually configure the port such that it is manually configured to use full duplex, 1000 mbs?

  Read the article

• Outlook email address autocompletion slow

  - by user214984

  Hello, I'm using outlook 2007. Two days ago, we've enabled auto-archiving, maybe that't the source of our problems, but I still have to investigate. At any rate, auto completion of email addresses in the to/cc/bcc fields has become a stopper, taking up to a minute to do something. I've searched the web, but found only references to problems with McAfee which I don't have installed (http://www.groovypost.com/howto/microsoft/outlook/fix-slow-outlook-email-address-auto-complete/) Thanks Holger

  Read the article

• Proxmox 31 + KVM routing + IP subnet + csf

  - by KeyJey

  We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• How can I add autocomplete in notepad++ for javascript in an .html file?

  - by Nikhil

  Notepad++ does auto-complete for html and also for JavaScript. but the auto-completion depends on file extension.html file supports completion for html only. Is there a way to enable auto-completion for javascript in the script tag of an html file? I mean, other than copying the auto-completion keyword list from "javascript.xml" to "html.xml" files... As suggested on stackoverflow, asking on superuser, as I could not find a satisfactory answer there. If anyone has any idea, please let me know! (I hope I am not the only one having this kind of an requirement! :))

  Read the article

• Templates and inheritance

  - by mariusz

  Hello, I have a big problem. I use additional controls for Wpf. One of them is Telerik RadWindow This control is already templated. Now I want to create custom Window with will inherit from RadWindow, and make custom template, eg. One base window will contains grid and two buttons, second base window will contain two grids (master - detail). The problem is that templates do not support inheritance. Perhaps is another way to template only the content of Winodow? My code, that doesn't work (empty window appears, so template doesn't apply) <Style TargetType="{x:Type local:TBaseRjWindow}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:TBaseRjContent}"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}"> <Grid Name="mGrid"> <Grid.ColumnDefinitions> <ColumnDefinition /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition MaxHeight="40" MinHeight="30" /> <RowDefinition MaxHeight="40" MinHeight="30" /> <RowDefinition Height="Auto" /> <RowDefinition MaxHeight="40" MinHeight="30" /> </Grid.RowDefinitions> <telerik:RadGridView Margin="10,10,10,10" Name="grid" Grid.Row="0" Grid.Column="0" VerticalAlignment="Stretch" HorizontalAlignment="Stretch" ScrollMode="Deferred" AutoGenerateColumns="False" Width="Auto" > </telerik:RadGridView> <telerik:RadDataPager Grid.Row="1" Grid.Column="0" x:Name="radDataPager" PageSize="50" AutoEllipsisMode="None" DisplayMode="First, Previous, Next, Text" Margin="10,0,10,0"/> <StackPanel Grid.Row="1" Grid.Column="0" Margin="5 5 5 5" HorizontalAlignment="Left" Orientation="Horizontal" Height="20" Width="Auto" VerticalAlignment="Center" > <telerik:RadButton x:Name="btAdd" Margin="5 0 5 0" Content="Dodaj" /> <telerik:RadButton x:Name="btEdit" Margin="5 0 5 0" Content="Edytuj" /> <telerik:RadButton x:Name="btDelete" Margin="5 0 5 0" Content="Usun" /> </StackPanel> <StackPanel Name="addFields" Background="LightGray" Visibility="Collapsed" VerticalAlignment="Top" Grid.Row="2" Grid.Column="0" Width="Auto" Height="Auto" Orientation="Horizontal"> <GroupBox Header="Szczegoly" Margin="2 2 2 2" > <Grid VerticalAlignment="Top" DataContext="{Binding SelectedItem, ElementName=grid}" Name="_gAddFields" Margin="0 0 0 0" Width="Auto" Height="Auto" > </Grid> </GroupBox> </StackPanel> <StackPanel Grid.Row="3" Grid.Column="0" Margin="5 5 5 5" HorizontalAlignment="Right" Orientation="Horizontal" Height="25" Width="Auto" VerticalAlignment="Center" > <telerik:RadButton x:Name="btSave" IsDefault="True" Width="60" Margin="5 0 5 0" Content="Zapisz" /> <telerik:RadButton x:Name="btOK" IsDefault="True" Width="60" Margin="5 0 5 0" Content="Akceptuj" /> <telerik:RadButton x:Name="btCancel" IsCancel="True" Width="60" Margin="5 0 5 0" Content="Anuluj" /> </StackPanel> </Grid> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> Please help

  Read the article

• rc scripts dependencies

  - by chris

  On a Ubuntu 10.04.1 LTS server install certain services fail to start properly after a reboot. I have a couple of virtual interfaces defined on eth0: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.5.240 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:1 iface eth0:1 inet static address 172.16.5.241 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:2 iface eth0:2 inet static address 172.16.5.242 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:3 iface eth0:3 inet static address 172.16.5.243 netmask 255.255.255.0 gateway 172.16.5.1 and so on... The services that try to bind to for example 172.16.5.243 fail during boot, complaining that there is no such IP address. My questions: 1) Are the services started parallel by default? Can I disable that so they run sequentially? 2) Is there a way to define dependencies between rc scripts? I'm only familiar with the defining the order of seqentially started scripts using the numbers in /etc/rc[0-6].d/) Any other fix or workaround appreciated.

  Read the article

• HP DL380 using HP NC522SFP NIC shows supported link modes: not reported

  - by MikeS

  When using ethtool on this NIC, the supported link modes show "not reported". Any idea why this is the case? Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 1 Transceiver: external Auto-negotiation: off Supports Wake-on: g Wake-on: g Current message level: 0x00002000 (8192) hw Link detected: yes

  Read the article

• background image disappears when position relative used in firefox

  - by toomanyairmiles

  So I'm trying to add a badge to the top right corner of a site I'm doing some work on. z-index works to float the object above the page content but each time i try to use position relative the background image disappears only position absolute shows the image. I don't really want to use absolute as the image needs to be positioned on the right hand side of the sites menu bar not the right hand side of the viewport. Any thoughts or advice appreciated <div class="badge-box"> <a href="http://www.google.com" class="badge">Book Now!</a> </div> <div id="header"> <a href="index.php"><img src="images/pixel.gif" width="378" height="31" alt="Welcome to Gwynfryn Farm Cottages" /></a> </div> <div id="main-menu"> <div> <a href="/">Home</a> <a href="/cottages.php">Our Cottages</a> <a href="/gwynfryn.php">Bed &amp; Breakfast</a> <a href="/rates.php">Price Guide</a> <a href="/llanbedr.php">Location &amp; Local Attractions</a> <a href="/news.php">News &amp; Special Offers</a> <a href="/contact.php">Contact Us</a> </div> </div> .badge-box { width: 1030px; margin-left: auto; margin-right: auto; border: 0px solid red; } .badge { background: url(../images/badge.png) 0px 0px no-repeat; width: 148px; height: 148px; text-indent: -10000px; position: relative; z-index: 999; } #header { width: 960px; height: 40px; margin-left:auto; margin-right:auto; margin-top:20px; padding: 20px 0px 0px 20px; background: #58564f url(../images/header-top-background.png); } #main-menu { width: 980px; margin-left: auto; margin-right: auto; height: 35px; /*background: red;*/ background: #58564f url(../images/header-bottom-background.png); font-family: Georgia, "Times New Roman", Times, serif; } #main-menu div { width: 776px; height: 35px; margin-left: auto; margin-right: auto; background: blue; } #main-menu div a { display: block; float: left; padding: 5px 10px 0px 10px; height: 30px; color: #FFFFFF; font-size: 1.2em; text-align: center; background: green; } #main-menu div a:hover { background-color: #333333; }

  Read the article

• Unable to ping gateway via bridge nic

  - by Ara

  I'm trying to install KVM on Ubuntu 12.04 server. We have multiple nic on this server of which we primarily use eth0. The server network runs fine(i'm able to ping gateway, ping dns server and ping servers on internet) with eth0 /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local I installed bridge-utils and configured br0 as below /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off Post which i'm able to ping servers on the same ip range 192.168.22.2-254 except for 192.168.22.1 (which is the gateway) also i'm not able to ping any other servers. I'm not able to ping this machine from network. The output for route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.22.1 0.0.0.0 UG 100 0 0 br0 192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 I've been struggling with this issue for past 5 days, would be of help if anyone can point me in the right direction to fix this issue. Thanks in advance

  Read the article

• RTNETLINK answers: File exists... maybe because assigned a new mac adress

  - by steven

  I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

  Read the article

• IPv6 routing to another interface

  - by Robert

  I'm trying to get an IPv6 enabled router to forward data from one interface to the other and I'm having issues. When following this example (http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080ba6106.shtml) I am able to get full connectivity between all 3 routers in my simulator. However when I try to use only 1 router; I can't get connectivity to the other interfacs on the same router. My PC is directly attached to FA 0/1 and it can ping the router's interface. However it can not ping any other interface on the router(which unless I'm missing something it should be able to do). The router on the other hand can ping everything. I thought static routes might help; but the router already has routes for everything. I'm thinking the packet should come in; router looks up the destination in it's ipv6 routing table and then realizes it's for itself, and should respond. I thought maybe it couldn't respond directly; so I tried pinging a device like 2001:0000:0000:1000::2, but i don't get a response. I'm running on IOS 12.4. I'm missing something(hopefully simple), but I just can't see what it is. With only 1 router; how do I enable my PC to talk to the other subnets? Thank you in advance, Robert Topology: R1 FA 0/0: 2001:0000:0000:0000::1/52 FA 0/1: 2001:0000:0000:1000::1/52 FA 1/0: 2001:0000:0000:2000::1/52 Loopback 0: 2001:0000:0000:3000::1/52 PC: 2001:0000:0000:2000::2/52 PC plugs directly into FA 1/0 on the router. --- Configuration --- ipv6 cef ipv6 unicast routing interface Loopback0 no ip address ipv6 address 2001:0000:0000:3000::1/52 ipv6 enable ! interface FastEthernet0/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000::1/52 ipv6 enable ! interface FastEthernet0/1 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:1000::1/52 ipv6 enable ! interface FastEthernet1/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:2000::1/52 ipv6 enable --- end of config --- --- routing table --- IPV6Lab#show ipv6 route IPv6 Routing Table - 10 entries Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP U - Per-user Static route I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 C 2001:0000:0000::/52 [0/0] via ::, FastEthernet0/0 L 2001:0000:0000::1/128 [0/0] via ::, FastEthernet0/0 C 2001:0000:0000:1000::/52 [0/0] via ::, FastEthernet0/1 L 2001:0000:0000:1000::1/128 [0/0] via ::, FastEthernet0/1 C 2001:0000:0000:2000::/52 [0/0] via ::, FastEthernet1/0 L 2001:0000:0000:2000::1/128 [0/0] via ::, FastEthernet1/0 C 2001:0000:0000:3000::/52 [0/0] via ::, Loopback0 L 2001:0000:0000:3000::1/128 [0/0] via ::, Loopback0 L FE80::/10 [0/0] via ::, Null0 L FF00::/8 [0/0] via ::, Null0 --- end of routing table ---

  Read the article

• automount a windows share

  - by user1632812

  I have this line and it works mount -t cifs -o myuser //192.168.0.12/Public/Docs /mnt/cifs_shares/Docs But then I try with autofs and it doesn't In /etc/auto.master: /mnt/cifs_shares/Docs /etc/auto.cifs_shares and in /etc/auto.cifs_shares Docs -fstype=cifs,rw,noperm,credentials=/etc/credentials.txt ://192.168.0.12/Public/Docs it seems that the thing gets mounted actually, but it turns to be empty. When mounted with mount it's not empty at all What am I missing ? I'm on Centos 6.3 64 bits

  Read the article

• xrandr fails when 3rd monitor has higher resolution

  - by Pi3cH

  I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

  Read the article

• Problems bringing up a second virtual network interface

  - by tubaguy50035

  I'm having issues adding a second IP address to one interface. Below is my /etc/networking/interfaces # The loopback network interface auto lo iface lo inet loopback #eth0 is our main IP address auto eth0 iface eth0 inet static address 198.58.103.* netmask 255.255.255.0 gateway 198.58.103.1 #eth0:0 is our private address auto eth0:0 iface eth0:0 inet static address 192.168.129.134 netmask 255.255.128.0 #eth0:1 is for www.site.com auto eth0:1 iface eth0:1 inet static address 198.58.104.* netmask 255.255.255.0 gateway 198.58.104.1 When I run /etc/init.d/networking restart, I get a fail error about bringing up eth0:1: RTNETLINK answers: File exists Failed to bring up eth0:1. Any reason this would be? I didn't have any problems with I first set up eth0 and eth0:0.

  Read the article

• Proxmox: VMs and different public IPs

  - by Raj

  I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

  Read the article

• Routing / binding 128 to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Thank you

  Read the article

• How can I make my eth0 connection default on startup?

  - by Alex

  I'm running kubuntu 9.10 and every time I log in auto eth0 is used instead of my custom connection called "batnet". I have batnet set to automatically connect, but despite this it is ignored and the default auto eth0 is used instead. This would be fine IF I could somehow figure out how to define a static ip for auto eth0. I would prefer to just make the 'batnet' connection default. How can I do this?

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >