Search Results

Search found 3953 results on 159 pages for 'byte slave'.

Page 55/159 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• award phoenix bios not recognizing my sata hdd.

  - by josh

  What am I doing wrong? I have a custom built comp with a Fatal1ty AA8XE mobo. It has 4 SATA ports and one IDE port. When i first got it, I had a really hard time putting in more than one hard drive. Right now i have one 120gb IDE HDD on master and my DVD+-RW on slave connected to the one IDE spot on the mobo. I ripped a bunch of movies and filled up my HDD, so I got a WD 80gb SATA drive. I plugged it into SATA1 and hooked up the power, turned on comp, went into bios. The only thing in any option in any of the menues in this crazy lookin bios is a thing that says "SATA mode". i put it on IDE, set it so PATA is primary, SATA is secondary. booted up my comp, nothin. Not recognizing the SATA. I went back into the bios and checked it all again. I saw that it says SATA2 and SATA4 are the secondaries so i put it on SATA2, booted, nothing, same with SATA4, same with SATA3, all same as SATA1. Bios and wt os are not recognizing the drive as being there at all. I even downloaded and printed the almost 100 page manual for the mobo, read the entire thing, and still can't figure it out. I know there are a lot of people out there smarter than me when it comes to computers. So please, somebody, anybody, please tell me something that I'm not seeing. Some setting somewhere that I didn't configure right. There is something, obviously, but I can't find it. As far as i can tell, everything is set perfectly fine for my 120gb to be the master and the SATA to be the slave. I don't know what I'm doing wrong but I'm seriously about to throw this computer out the window. thankyou in advance to whoever attempts to help.

  Read the article

• Xen kernel can't see 2 disks of 6 of 1TB, does it have a limitation?

  - by PartySoft

  Linux gentoo-xen 2.6.18-xen-r12 #3 SMP Tue Oct 5 09:28:53 PDT 2010 x86_64 Intel(R) Xeon(R) CPU E5506 @ 2.13GHz GenuineIntel GNU/Linux I have 6 disks of 1 TB and i can't see all of them only 4, can anyone give me an ideea what can i do ? Filesystem Size Used Avail Use% Mounted on rootfs 886G 4.4G 836G 1% / /dev/sda3 886G 4.4G 836G 1% / rc-svcdir 1.0M 44K 980K 5% /lib64/rc/init.d shm 7.9G 0 7.9G 0% /dev/shm /dev/sdb1 917G 200M 871G 1% /home2 /dev/sdc1 917G 200M 871G 1% /home3 /dev/sdd1 917G 200M 871G 1% /home4 The hardware is Dual xeon E5506 processors on a supermicro X8DTL mobo 4.346585] ata3.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.346588] ata3.00: ata3: dev 0 multi count 16 [ 4.352861] ata3.00: configured for UDMA/133 [ 4.352867] scsi3 : ata_piix [ 4.352875] PM: Adding info for No Bus:host3 [ 4.510584] ata4.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.510587] ata4.00: ata4: dev 0 multi count 16 [ 4.516848] ata4.00: configured for UDMA/133 [ 4.516861] PM: Adding info for No Bus:target2:0:0 [ 4.516905] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.516910] Type: Direct-Access ANSI SCSI revision: 05 [ 4.516920] PM: Adding info for scsi:2:0:0:0 [ 4.517452] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517460] sde: Write Protect is off [ 4.517461] sde: Mode Sense: 00 3a 00 00 [ 4.517478] SCSI device sde: drive cache: write back [ 4.517514] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517521] sde: Write Protect is off [ 4.517522] sde: Mode Sense: 00 3a 00 00 [ 4.517532] SCSI device sde: drive cache: write back [ 4.517534] sde: sde1 [ 4.524551] sd 2:0:0:0: Attached scsi disk sde [ 4.524855] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 4.524874] PM: Adding info for No Bus:target3:0:0 [ 4.524928] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.524933] Type: Direct-Access ANSI SCSI revision: 05 [ 4.524946] PM: Adding info for scsi:3:0:0:0 [ 4.525216] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525227] sdf: Write Protect is off [ 4.525228] sdf: Mode Sense: 00 3a 00 00 [ 4.525242] SCSI device sdf: drive cache: write back [ 4.525280] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525286] sdf: Write Protect is off [ 4.525289] sdf: Mode Sense: 00 3a 00 00 [ 4.525301] SCSI device sdf: drive cache: write back [ 4.525302] sdf: sdf1 [ 4.532691] sd 3:0:0:0: Attached scsi disk sdf [ 4.533010] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 4.977669] scsi: <fdomain> Detection failed (no card) [ 5.030479] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.030635] GDT-HA: Found 0 PCI Storage RAID Controllers [ 5.372350] Fusion MPT base driver 3.04.01 [ 5.372358] Copyright (c) 1999-2005 LSI Logic Corporation [ 5.579176] Fusion MPT SPI Host driver 3.04.01 [ 5.881777] ieee1394: Initialized config rom entry `ip1394' [ 6.166745] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 6.166748] ieee1394: sbp2: Try serialize_io=0 for better performance [ 6.428866] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 6.428872] md: bitmap version 4.39 [ 6.431518] md: raid0 personality registered for level 0 [ 6.495979] md: raid1 personality registered for level 1 [ 6.570270] raid5: automatically using best checksumming function: generic_sse [ 6.575523] generic_sse: 6608.000 MB/sec [ 6.575526] raid5: using function: generic_sse (6608.000 MB/sec) [ 6.596226] raid6: int64x1 1835 MB/s [ 6.613231] raid6: int64x2 1773 MB/s [ 6.630256] raid6: int64x4 1675 MB/s [ 6.647296] raid6: int64x8 1027 MB/s [ 6.664267] raid6: sse2x1 3578 MB/s [ 6.681268] raid6: sse2x2 4207 MB/s [ 6.698280] raid6: sse2x4 4625 MB/s [ 6.698281] raid6: using algorithm sse2x4 (4625 MB/s) [ 6.698285] md: raid6 personality registered for level 6 [ 6.698286] md: raid5 personality registered for level 5 [ 6.698288] md: raid4 personality registered for level 4 [ 6.781090] md: raid10 personality registered for level 10 [ 7.007043] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 7.007046] Copyright (c) 1999-2006 Intel Corporation. [ 9.229465] kjournald starting. Commit interval 5 seconds [ 9.229476] EXT3-fs: mounted filesystem with ordered data mode.

  Read the article

• Openldap/Sasl/GSSAPI on Debian: Key table entry not found

  - by badbishop

  The goal: to make an OpenLDAP server to authenticate using Kerberos V via GSSAPI Setup: several virtual machines running on freshly installed/updated Debian Squeeze A master KDC server kdc.example.com A LDAP server, running OpenLDAP ldap.example.com The problem: tom@ldap:~$ ldapsearch -b 'dc=example,dc=com' SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Key table entry not found) One might suggest to add that bloody keytab entry, but here's the real problem: ktutil: rkt /etc/ldap/ldap.keytab ktutil: list slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 2 ldap/[email protected] 2 2 ldap/[email protected] 3 2 ldap/[email protected] 4 2 ldap/[email protected] So, the entry as suggested by the OpenLDAP manual is there allright. Deleting and re-creating both service principal and the keytab on ldap.example.com didn't help, I get the same error. And before I make the keytab file readable by openldap, I get "Permission denied" error instead of the one in the subject. Which implies, that the right keytab file is being accessed, as set in /etc/default/slapd. I have my doubts about the following part of slapd config: root@ldap:~# cat /etc/ldap/slapd.d/cn\=config.ldif | grep -v "^#" dn: cn=config objectClass: olcGlobal cn: config olcArgsFile: /var/run/slapd/slapd.args olcLogLevel: 256 olcPidFile: /var/run/slapd/slapd.pid olcToolThreads: 1 structuralObjectClass: olcGlobal entryUUID: d6737f5c-d321-1030-9dbe-27d2a7751e11 olcSaslHost: kdc.example.com olcSaslRealm: EXAMPLE.COM olcSaslSecProps: noplain,noactive,noanonymous,minssf=56 olcAuthzRegexp: {0}"uid=([^/]*),cn=EXAMPLE.COM,cn=GSSAPI,cn=auth" "uid=$1,ou=People,dc=example,dc=com" olcAuthzRegexp: {1}"uid=host/([^/]*).example.com,cn=example.com,cn=gssapi,cn=auth" "cn=$1,ou=hosts,dc=example,dc=com" A HOWTO at https://help.ubuntu.com/community/OpenLDAPServer#Kerberos_Authentication mentiones vaguely: Also, it is frequently necessary to map the Distinguished Name (DN) of an authorized Kerberos client to an existing entry in the DIT. I fail to understand where in the tree this should be defined, what schema should be used, etc. After hours of googling, it's official: I'm stuck! Please, help. Other things checked: Kerberos as such works fine (I can ssh without using a password to any machine in this setup). That means there should be no DNS-related problems. ldapsearch -b 'dc=example,dc=com' -x works OK. SASL/GSSAPI has been tested using sasl-sample-server -m GSSAPI -s ldap and sasl-sample-client -s ldap -n ldap.example.com -u tom without errors: root@ldap:~# sasl-sample-server -m GSSAPI -s ldap Forcing use of mechanism GSSAPI Sending list of 1 mechanism(s) S: R1NTQVBJ Waiting for client mechanism... C: R1NTQVBJAGCCAmUGCSqGSIb3EgECAgEAboICVDCCAlCgAwIBBaEDAgEOogcDBQAgAAAAo4IBamGCAWYwggFioAMCAQWhDRsLRVhBTVBMRS5DT02iIzAhoAMCAQOhGjAYGwRsZGFwGxBsZGFwLmV4YW1wbGUuY29to4IBJTCCASGgAwIBEqEDAgECooIBEwSCAQ8Re8XUnscB8dx6V/cXL+uzSF2/olZvcrVAJHZBZrfRKUFEQmU1Li46bUGK3GZwsn6qUVwmW6lyqVctOIYwGvBpz81Rw/5mj4V5iQudZbIRa+5Ew6W1oBB7ALi2cnPsbUroqzGmEh8/Vw8zSFk7W1gND4DLuWrPXD2xhLDUMMekBn5nXEPTnNAnV4w81Sj3ZlyLZz5OSitGVUEnQweV53z1spWsASHHWod/tSuxb19YeWmY5QHXPLG+lL5+w+Cykr0EhYVj8f8MDWFB8qoN1cr85xDfn18r8JldSw+i18nFKOo8usG+37hZTWynHYvBfMONtG9mLJv82KGPZMydWK7pzyTZDcnSsIjo2AftMZd5pIHMMIHJoAMCARKigcEEgb5aG1k4xgxmUXX7RKfvAbVBVJ12dWOgFFjMYceKjziXwrrOkv8ZwIvef9Yn2KsWznb5L55SXt2c/zlPa5mLKIktvw77hsK1h/GYc7p//BGOsmr47aCqVWsGuTqVT129uo5LNQDeSFwl2jXCkCZJZavOVrqYsM6flrPYE4n5lASTcPitX+/WNsf6WrvZoaexiv1JqyM/MWqS/vMBRMMc5xlurj6OARFvP9aFZoK/BLmfkSyAJj6MLbLVXZtkHiIPgot 'GSSAPI' Sending response... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cR Waiting for client reply... C: got '' Sending response... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4= Waiting for client reply... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw=got '?' Negotiation complete Username: tom Realm: (NULL) SSF: 56 sending encrypted message 'srv message 1' S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazx Waiting for encrypted message... C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpcztgot '' recieved decoded message 'client message 1' root@ldap:~# sasl-sample-client -s ldap -n ldap.example.com -u tom service=ldap Waiting for mechanism list from server... S: R1NTQVBJrecieved 6 byte message Choosing best mechanism from: GSSAPI returning OK: tom Using mechanism GSSAPI Preparing initial. Sending initial response... C: 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 Waiting for server reply... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cRrecieved 156 byte message C: Waiting for server reply... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4=recieved 32 byte message Sending response... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw= Negotiation complete Username: tom SSF: 56 Waiting for encoded message... S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazxrecieved 78 byte message recieved decoded message 'srv message 1' sending encrypted message 'client message 1' C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpczt

  Read the article

• MySQL-Cluster or Multi-Master for production? Performance issues?

  - by Phillip Oldham

  We are expanding our network of webservers on EC2 to a number of different regions and currently use master/slave replication. We've found that over the past couple of months our slave has stopped replicating a number of times which required us to clear the db and initialise the replication again. As we're now looking to have servers in 3 different regions we're a little concerned about these MySQL replication errors. We believe they're due to auto_increment values, so we're considering a number of approaches to quell these errors and stabilise replication: Multi-Master replication; 3 masters (one in each region), with the relevant auto_increment offsets, regularly backing up to S3. Or, MySQL-Cluster; 3 nodes (one in each region) with a separate management node which will also aggregate logs and statistics. After investigating it seems they both have down-sides (replication errors for the former, performance issues for the latter). We believe the cluster approach would allow us to manage and add new nodes more easily than the Multi-Master route, and would reduce/eliminate the replication issues we're currently seeing. But performance is a priority. Are the performance issues of MySQL-Cluster as bad as people say?

  Read the article

• AuthBasicProvider: failover not working when the first LDAP is down?

  - by quanta

  I've been trying to setup redundant LDAP servers with Apache 2.2.3. /etc/httpd/conf.d/authn_alias.conf <AuthnProviderAlias ldap master> AuthLDAPURL ldap://192.168.5.148:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> <AuthnProviderAlias ldap slave> AuthLDAPURL ldap://192.168.5.199:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> /etc/httpd/conf.d/authz_ldap.conf # # mod_authz_ldap can be used to implement access control and # authenticate users against an LDAP database. # LoadModule authz_ldap_module modules/mod_authz_ldap.so <IfModule mod_authz_ldap.c> <Location /> AuthBasicProvider master slave AuthzLDAPAuthoritative Off AuthType Basic AuthName "Authorization required" AuthzLDAPMemberKey member AuthUserFile /home/setup/svn/auth-conf AuthzLDAPSetGroupAuth user require valid-user AuthzLDAPLogLevel error </Location> </IfModule> If I understand correctly, mod_authz_ldap will try to search users in the second LDAP if the first server is down or OpenLDAP on it is not running. But in practice, it does not happen. Tested by stopping LDAP on the master, I get the "500 Internal Server Error" when accessing to the Subversion repository. The error_log shows: [11061] auth_ldap authenticate: user quanta authentication failed; URI / [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] Did I misunderstand?

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• Balancing internal services using a Cisco CSS 11501

  - by Ladadadada

  First, the background to the problem: I have a Cisco CSS11501 that I am using to load balance a few web servers. These web servers have two network interfaces, one internal and one external and we are sending the requests to the internal interface. We have the CSS configured to do NAT because our webservers need to see the client's IP address. Because the TCP packets hit the webservers with a source address on the Internet, the webserver tries to send the packet back to the client over the external interface and not through the load balancer. In order to stop these requests being sent back out to the Internet via the external interface, we added a routing rule on these boxes so that all traffic with a source address on the internet will use the load balancer as the gateway. This part works fine. What I would also like to to is use the CSS as a load balancer for internal services such as our MySQL slaves. When I do this, I run into a similar problem; the TCP connection goes from the web server to the load balancer and then from the load balancer to the MySQL slave but the CSS spoofs a source address of the original webserver. The MySQL slave then tries to send the response directly to the webserver via the internal network and not via the load balancer. The ideal solution would be to tell the CSS not to do source address spoofing on the internal network and only do it for requests originating on the Internet. Is this possible ? Failing that, is there a way of directing the load balanced traffic back through the load balancer while keeping the other traffic (say SSH) purely on the internal network ? Is there another way of using the CSS11501 to load balance internal services ?

  Read the article

• bond0 and xen = crash

  - by Rajat

  Bonding with xen 1 - Stop all guests. Reboot dom0 after running "chkconfig xend off" and "chkconfig xendomains off". 2 - Configure bond0 by enslaving eth0 and eth1 to it. I added the below two entries to /etc/modprobe.conf. alias bond0 bonding options bond0 mode=6,miimon=100 Content of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR= NETMASK= ONBOOT=yes BOOTPROTO=static USERCTL=no Did "modprobe bond0" and "service network restart" after that. 3 - Edit /etc/xen/xend-config.sxp Change (network-script network-bridge) To (network-script 'network-bridge netdev=bond0') 4 - Start xend. "service xend start". 5 - chkconfig xend on. 6 - modprode bond0 7 - more /proc/net/bonding/bond0 8 - Create guest images as usual and bridge it to xenbr0. about config i did for my xen kernel rhel 5.3 after i reboot the host server i get in place bond0 get pbond0 and its get disconnect from network only i ping to my vm's on the host server any one have any idea why xen bond0 is acting like that or what is solutions to come out of pbond0 to bond0.

  Read the article

• Multiple LDAP servers with mod_authn_alias: failover not working when the first LDAP is down?

  - by quanta

  I've been trying to setup redundant LDAP servers with Apache 2.2.3. /etc/httpd/conf.d/authn_alias.conf <AuthnProviderAlias ldap master> AuthLDAPURL ldap://192.168.5.148:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> <AuthnProviderAlias ldap slave> AuthLDAPURL ldap://192.168.5.199:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> /etc/httpd/conf.d/authz_ldap.conf # # mod_authz_ldap can be used to implement access control and # authenticate users against an LDAP database. # LoadModule authz_ldap_module modules/mod_authz_ldap.so <IfModule mod_authz_ldap.c> <Location /> AuthBasicProvider master slave AuthzLDAPAuthoritative Off AuthType Basic AuthName "Authorization required" AuthzLDAPMemberKey member AuthUserFile /home/setup/svn/auth-conf AuthzLDAPSetGroupAuth user require valid-user AuthzLDAPLogLevel error </Location> </IfModule> If I understand correctly, mod_authz_ldap will try to search users in the second LDAP if the first server is down or OpenLDAP on it is not running. But in practice, it does not happen. Tested by stopping LDAP on the master, I get the "500 Internal Server Error" when accessing to the Subversion repository. The error_log shows: [11061] auth_ldap authenticate: user quanta authentication failed; URI / [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] Did I misunderstand? AuthBasicProvider ldap1 ldap2 only means that if mod_authz_ldap can't find the user in ldap1, it will continue with ldap2. It doesn't include the failover feature (ldap1 must be running and working fine)?

  Read the article

• Question About mk-table-checksum Results

  - by stevenmusumeche

  Hello, I have 1 master and 2 slaves. I am using MySQL 5.1.42 on all servers. I am attempting to use mk-table-checksum to verify that their data is in sync, but I am getting unexpected results on one of the slaves. First, I generate the checksums on the master like this: mk-table-checksum h=localhost --databases MYDB --tables {$table_list} --replicate=MYDB.mk_checksum --chunk-size=10M My understanding is that this runs the checksum queries on the master which then propagate via normal replication to the slaves. So, no locking is needed because the slaves will be at the same logical point in time when they run the checksum queries on themselves. Is this correct? Next, to verify that the checksums match, I run this on the master: mk-table-checksum --databases MYDB --replicate=IRC.mk_checksum --replicate-check 1 h=localhost,u=maatkit,p=xxxx If there are any differences, I repair the slaves like this: mk-table-sync --execute --verbose --replicate IRC.mk_checksum h=localhost,u=maatkit,p=xxxx After doing all of this, I repaired both slaves with mk-table-sync. However, everytime I run this sequence (after everything has already been repaired), one slave is perfectly in sync but one slave always has a few tables out of sync. I am 99.999% sure that the data on the slaves matches, since I repaired everything and the tables were not even updated on the master between runs of the checksum script. What would cause a few tables to always show out of sync on only one of the slaves? I am stuck. Here is the output: Differences on h=x.x.x.x,p=...,u=maatkit DB TBL CHUNK CNT_DIFF CRC_DIFF BOUNDARIES IRC product 10 0 1 product_id = 147377 AND product_id < 162085 IRC post_order_survey 0 0 1 1=1 IRC mk_heartbeat 0 0 1 1=1 IRC mailing_list 0 0 1 1=1 IRC honey_pot_log 0 0 1 1=1 IRC product 12 0 1 product_id = 176793 AND product_id < 191501 IRC product 18 0 1 product_id = 265041 IRC orders 26 0 1 order_id = 694472 IRC orders_product 6 0 1 op_id = 935375

  Read the article

• My system administrator set up 2 databases that sync. Master-Master. However, these two databases a

  - by Alex

  DB1 and DB2. I made changes to DB1, and it does not seem to be on DB2. When I do "SHOW SLAVE STATUS\G" on DB2, there seems to be an error: mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.0005496 Read_Master_Log_Pos: 5445649315 Relay_Log_File: mysqld-relay-bin.0041705 Relay_Log_Pos: 1624302119 Relay_Master_Log_File: mysql-bin.0004461 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1062 Last_Error: Error 'Duplicate entry '4779' for key 1' on query. Default database: 'falc'. Query: 'INSERT INTO `log` (`anon_id`, `created_at`, `query`, `episode_url`, `detail_id`, `ip`) VALUES ('fdzn1d45kMavF4qbyePv', '2009-11-19 04:19:13', 'amazon', '', '', '130.126.40.57')' Skip_Counter: 0 Exec_Master_Log_Pos: 162301982 Relay_Log_Space: 136505187184 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Then, I did show tables, and it seems like DB2 is lacking a table that I created on DB1...that means that for some reason, DB2 stopped syncing with DB1. How can I simply allow them to be in full synchronization again? All I want is DB2 to be exactly the same as DB1!

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

  - by Bobby Burgess

  This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

  Read the article

• Percona-server time out on /etc/init.d/mysql start

  - by geekmenot

  Every time I start mysql, using /etc/init.d/mysql start or service mysql start, it always times out. * Starting MySQL (Percona Server) database server mysqld [fail] However, I can get into mysql. Just wanted to know if there is a problem with the install because it happens all the time, not a one off error. mysql-error.log shows: 121214 11:25:56 mysqld_safe Starting mysqld daemon with databases from /data/mysql/ 121214 11:25:56 [Note] Plugin 'FEDERATED' is disabled. 121214 11:25:56 InnoDB: The InnoDB memory heap is disabled 121214 11:25:56 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121214 11:25:56 InnoDB: Compressed tables use zlib 1.2.3 121214 11:25:56 InnoDB: Using Linux native AIO 121214 11:25:56 InnoDB: Initializing buffer pool, size = 14.0G 121214 11:25:58 InnoDB: Completed initialization of buffer pool 121214 11:26:01 InnoDB: Waiting for the background threads to start 121214 11:26:02 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.2 started; log sequence number 9333955393950 121214 11:26:02 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121214 11:26:02 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121214 11:26:02 [Note] Server socket created on IP: '0.0.0.0'. 121214 11:26:02 [Note] Slave SQL thread initialized, starting replication in log 'mysql-bin.005163' at position 624540946, relay log '/data/mysql/mysql-relay-bin.000043' position: 624541092 121214 11:26:02 [Note] Slave I/O thread: connected to master '[email protected]:3306',replication started in log 'mysql-bin.005180' at position 823447620 121214 11:26:02 [Note] Event Scheduler: Loaded 0 events 121214 11:26:02 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.2-log' socket: '/data/mysql/mysql.sock' port: 3306 Percona Server (GPL), Release 29.2

  Read the article

• A few tables are still out of sync after running mk-table-sync

  - by smusumeche

  I have 1 master and 2 slaves. I am using MySQL 5.1.42 on all servers. I am attempting to use mk-table-checksum to verify that their data is in sync, but I am getting unexpected results on one of the slaves. First, I generate the checksums on the master like this: mk-table-checksum h=localhost --databases MYDB --tables {$table_list} --replicate=MYDB.mk_checksum --chunk-size=10M My understanding is that this runs the checksum queries on the master which then propagate via normal replication to the slaves. So, no locking is needed because the slaves will be at the same logical point in time when they run the checksum queries on themselves. Is this correct? Next, to verify that the checksums match, I run this on the master: mk-table-checksum --databases MYDB --replicate=IRC.mk_checksum --replicate-check 1 h=localhost,u=maatkit,p=xxxx If there are any differences, I repair the slaves like this: mk-table-sync --execute --verbose --replicate IRC.mk_checksum h=localhost,u=maatkit,p=xxxx After doing all of this, I repaired both slaves with mk-table-sync. However, everytime I run this sequence (after everything has already been repaired), one slave is perfectly in sync but one slave always has a few tables out of sync. I am 99.999% sure that the data on the slaves matches, since I repaired everything and the tables were not even updated on the master between runs of the checksum script. What would cause a few tables to always show out of sync on only one of the slaves? I am stuck. Here is the output: Differences on h=x.x.x.x,p=...,u=maatkit DB TBL CHUNK CNT_DIFF CRC_DIFF BOUNDARIES IRC product 10 0 1 product_id = 147377 AND product_id < 162085 IRC post_order_survey 0 0 1 1=1 IRC mk_heartbeat 0 0 1 1=1 IRC mailing_list 0 0 1 1=1 IRC honey_pot_log 0 0 1 1=1 IRC product 12 0 1 product_id = 176793 AND product_id < 191501 IRC product 18 0 1 product_id = 265041 IRC orders 26 0 1 order_id = 694472 IRC orders_product 6 0 1 op_id = 935375

  Read the article

• HD working with IDE USB adapter but not recognised by bios

  - by Rajeeva

  I have a Windows XP Pentium III desktop with two hard drives. The first one has the OS and is luckily working. The second drive on the secondary master IDE channel few days back was unable to read some files and since then for some time it was failing and reviving intermittently and now it is always showing as failed on the IDE channel When the HD was intermittenly failing, I was able to copy some data from it to the other drive - also during that time if the system was running and the hard disk failed at that time, the system froze and then i had to reboot. then I got a new 80 gb hdd similar (same make - seagate barracuda) to the earlier failing one, a new data cable for the drive and an IDE to USB adapter. the new hard drive i installed in the previous drive's place (secondary master), formatted it and it worked for 1 day and then it also failed - simultaneously i connected the old hd to the IDE/USB adapter and i could view all the data - some of that data i was able to back up from the old hd to the new hd before the new hd failed the new hd i have tried connecting on the primary channel as the slave disk but when i do that then the bios does not detect either the OS drive or the new drive and the system does not boot surprisingly, the older (previously failed) hd and the new hd are both working fine on the usb channel with the IDE/USB adapter. i have ruled out any problem with the secondary channel since the dvd rom i was earlier using as primary slave have now connected to secondary master and it works fine. i am really confused by this behavior on my system. please can anybody try to solve this for me. thanks.

  Read the article

• thought about shared storage (NFS, Lustre) [closed]

  - by user134880

  Possible Duplicate: Can you help me with my capacity planning? Now I habe small cluster with total of 8 nodes. 6 of them are computing nodes (apache and vmware) and 2 nodes are for storage. 2 storage nodes are identical. Each storage server is linux box with 8 x 1Tb WD RE4 in soft raid 10. 1st box is master and 2nd is slave. Data is mirrored with DRDB. We export NFSv4 shares to Apache (for document root) and iSCSI to Vmware. Now all is working pretty good and stable. But it will be soon time to upgrade our system. I have been thinking of Lustre. Does some one has any real experience with Lustre or NFS medium clusters? Will it be good idea just to upgrade server and change hdd's to 3Tb ? With NFS we will always have only 2 servers to maintain (one primary and one slave). Thanks. QUESTIONS: 1) Does some one used Lustre? In production? I have seen a lot of info about how it is hard to setup Lustre because you need to compile own kernel and patches. It's answers from newbies. Is there some one who has used Lustre for some period of time? 2) About disk upgrades - it's only description of strategy. I'm not asking if it is enough 3Tb or not. I just ask if it is right just to replace hdds instead of adding new server (like with Lustre) Thanks again.

  Read the article

• error while resolving DNS requires

  - by user2803887

  I followed this document to configure master-slave powerdns servers... http://linuxmanage.com/master-slave-powerdns-managed-by-poweradmin.html Installation completed perfectly no errors even I feel DNS is trying to resolve some queries and parameter.. but while going through intodns.com i get below error for domain names which i have created in powerdns name server installed as above guide. Error Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records. Error Multiple Nameservers ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me. Error Missing nameservers You should already know that your NS records at your reported by your nameservers are missing, so here it is again: nameservers ns1.makeittiny.com. ns2.makeittiny.com. I am much new to powerdns so not able to figure out where problem.. i check all things but not able to make out where problem remains.

  Read the article

• Google Chrome on Linux not using ALSA for sound

  - by DarkMoon

  On my laptop, I've got an .asoundrc file that outputs sound to my USB headset. This works fine for SMplayer and Firefox. However, Google Chrome (at least, Flash-based and HTML5-based videos and HTML5-based audio in Chrome) plays through the laptop speakers instead. I've tried running Chrome from a command-line, hoping there would be some helpful output, but no such luck. I've tried looking through Google for whether Chrome even uses ALSA, or if it uses something else, but I have been unsuccessful in this. This question seems to be the same issue, but no suggestion was made. Anyone have any ideas? I'm running Gentoo with a 3.10.17 kernel, 1.0.27 ALSA utils, 2.6.5 FVWM, and 36.0.1985.143 Chrome. If you need more info, please let me know. EDIT: I've configured the USB headset as the default ALSA device. Volume levels for both headset and onboard are set and un-muted using alsamixer. My .asoundrc file is as follows. ctl.!default { type hw card Headset } pcm.dmixer { type dmix ipc_key 1024 slave { pcm { type hw card Headset } period_size 1024 buffer_size 4096 } bindings { 0 0 1 1 } } pcm.!default { type plug slave.pcm dmixer }

  Read the article

• Log message Request and Response in ASP.NET WebAPI

  - by Fredrik N

  By logging both incoming and outgoing messages for services can be useful in many scenarios, such as debugging, tracing, inspection and helping customers with request problems etc.  I have a customer that need to have both incoming and outgoing messages to be logged. They use the information to see strange behaviors and also to help customers when they call in  for help (They can by looking in the log see if the customers sends in data in a wrong or strange way).   Concerns Most loggings in applications are cross-cutting concerns and should not be  a core concern for developers. Logging messages like this:   // GET api/values/5 public string Get(int id) { //Cross-cutting concerns Log(string.Format("Request: GET api/values/{0}", id)); //Core-concern var response = DoSomething(); //Cross-cutting concerns Log(string.Format("Reponse: GET api/values/{0}\r\n{1}", id, response)); return response; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } will only result in duplication of code, and unnecessarily concerns for the developers to be aware of, if they miss adding the logging code, no logging will take place. Developers should focus on the core-concern, not the cross-cutting concerns. By just focus on the core-concern the above code will look like this: // GET api/values/5 public string Get(int id) { return DoSomething(); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The logging should then be placed somewhere else so the developers doesn’t need to focus care about the cross-concern. Using Message Handler for logging There are different ways we could place the cross-cutting concern of logging message when using WebAPI. We can for example create a custom ApiController and override the ApiController’s ExecutingAsync method, or add a ActionFilter, or use a Message Handler. The disadvantage with custom ApiController is that we need to make sure we inherit from it, the disadvantage of ActionFilter, is that we need to add the filter to the controllers, both will modify our ApiControllers. By using a Message Handler we don’t need to do any changes to our ApiControllers. So the best suitable place to add our logging would be in a custom Message Handler. A Message Handler will be used before the HttpControllerDispatcher (The part in the WepAPI pipe-line that make sure the right controller is used and called etc). Note: You can read more about message handlers here, it will give you a good understanding of the WebApi pipe-line. To create a Message Handle we can inherit from the DelegatingHandler class and override the SendAsync method: public class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { return base.SendAsync(request, cancellationToken); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   If we skip the call to the base.SendAsync our ApiController’s methods will never be invoked, nor other Message Handlers. Everything placed before base.SendAsync will be called before the HttpControllerDispatcher (before WebAPI will take a look at the request which controller and method it should be invoke), everything after the base.SendAsync, will be executed after our ApiController method has returned a response. So a message handle will be a perfect place to add cross-cutting concerns such as logging. To get the content of our response within a Message Handler we can use the request argument of the SendAsync method. The request argument is of type HttpRequestMessage and has a Content property (Content is of type HttpContent. The HttpContent has several method that can be used to read the incoming message, such as ReadAsStreamAsync, ReadAsByteArrayAsync and ReadAsStringAsync etc. Something to be aware of is what will happen when we read from the HttpContent. When we read from the HttpContent, we read from a stream, once we read from it, we can’t be read from it again. So if we read from the Stream before the base.SendAsync, the next coming Message Handlers and the HttpControllerDispatcher can’t read from the Stream because it’s already read, so our ApiControllers methods will never be invoked etc. The only way to make sure we can do repeatable reads from the HttpContent is to copy the content into a buffer, and then read from that buffer. This can be done by using the HttpContent’s LoadIntoBufferAsync method. If we make a call to the LoadIntoBufferAsync method before the base.SendAsync, the incoming stream will be read in to a byte array, and then other HttpContent read operations will read from that buffer if it’s exists instead directly form the stream. There is one method on the HttpContent that will internally make a call to the  LoadIntoBufferAsync for us, and that is the ReadAsByteArrayAsync. This is the method we will use to read from the incoming and outgoing message. public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var requestMessage = await request.Content.ReadAsByteArrayAsync(); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); return response; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The above code will read the content of the incoming message and then call the SendAsync and after that read from the content of the response message. The following code will add more logic such as creating a correlation id to combine the request with the response, and create a log entry etc: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } public class MessageLoggingHandler : MessageHandler { protected override async Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message) { await Task.Run(() => Debug.WriteLine(string.Format("{0} - Request: {1}\r\n{2}", correlationId, requestInfo, Encoding.UTF8.GetString(message)))); } protected override async Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message) { await Task.Run(() => Debug.WriteLine(string.Format("{0} - Response: {1}\r\n{2}", correlationId, requestInfo, Encoding.UTF8.GetString(message)))); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   The code above will show the following in the Visual Studio output window when the “api/values” service (One standard controller added by the default WepAPI template) is requested with a Get http method : 6347483479959544375 - Request: GET http://localhost:3208/api/values 6347483479959544375 - Response: GET http://localhost:3208/api/values ["value1","value2"] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Register a Message Handler To register a Message handler we can use the Add method of the GlobalConfiguration.Configration.MessageHandlers in for example Global.asax: public class WebApiApplication : System.Web.HttpApplication { protected void Application_Start() { GlobalConfiguration.Configuration.MessageHandlers.Add(new MessageLoggingHandler()); ... } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Summary By using a Message Handler we can easily remove cross-cutting concerns like logging from our controllers. You can also find the source code used in this blog post on ForkCan.com, feel free to make a fork or add comments, such as making the code better etc. Feel free to follow me on twitter @fredrikn if you want to know when I will write other blog posts etc.

  Read the article

• Installing Lubuntu 14.04.1 forcepae fails

  - by Rantanplan

  I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

  Read the article

• Searching for Windows User SID's in C#

  - by Ubiquitous Che

  Context Context first - issues I'm trying to resolve are below. One of our clients has asked as to quote how long it would take for us to improve one of our applications. This application currently provides basic user authentication in the form of username/password combinations. This client would like the ability for their employees to log-in using the details of whatever Windows User account is currently logged in at the time of running the application. It's not a deal-breaker if I tell them know - but the client might be willing to pay the costs of development to add this feature to the application. It's worth looking into. Based on my hunting around, it seems like storing the user login details against Domain\Username will be problematic if those details are changed. But Windows User SID's aren't supposed to change at all. I've got the impression that it would be best to record Windows Users by SID - feel free to relieve me of that if I'm wrong. I've been having a fiddle with some Windows API calls. From within C#, grabbing the current user's SID is easy enough. I can already take any user's SID and process it using LookupAccountSid to get username and domain for display purposes. For the interested, my code for this is at the end of this post. That's just the tip of the iceberg, however. The two issues below are completely outside my experience. Not only do I not know how to implement them - I don't even known how to find out how to implement them, or what the pitfalls are on various systems. Any help getting myself aimed in the right direction would be very much appreciated. Issue 1) Getting hold of the local user at runtime is meaningless if that user hasn't been granted access to the application. We will need to add a new section to our application's 'administrator console' for adding Windows Users (or groups) and assigning within-app permissions against those users. Something like an 'Add Windows User Login' button that will raise a pop-up window that will allow the user to search for available Windows User accounts on the network (not just the local machine) to be added to the list of available application logins. If there's already a component in .NET or Windows that I can shanghai into doing this for me, it would make me a very happy man. Issue 2) I also want to know how to take a given Windows User SID and check it against a given Windows User Group (probably taken from a database). I'm not sure how to get started with this one either, though I expect it to be easier than the issue above. For the Interested [STAThread] static void Main(string[] args) { MessageBox.Show(WindowsUserManager.GetAccountNameFromSID(WindowsIdentity.GetCurrent().User.Value)); MessageBox.Show(WindowsUserManager.GetAccountNameFromSID("S-1-5-21-57989841-842925246-1957994488-1003")); } public static class WindowsUserManager { public static string GetAccountNameFromSID(string SID) { try { StringBuilder name = new StringBuilder(); uint cchName = (uint)name.Capacity; StringBuilder referencedDomainName = new StringBuilder(); uint cchReferencedDomainName = (uint)referencedDomainName.Capacity; WindowsUserManager.SID_NAME_USE sidUse; int err = (int)ESystemError.ERROR_SUCCESS; if (!WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse)) { err = Marshal.GetLastWin32Error(); if (err == (int)ESystemError.ERROR_INSUFFICIENT_BUFFER) { name.EnsureCapacity((int)cchName); referencedDomainName.EnsureCapacity((int)cchReferencedDomainName); err = WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse) ? (int)ESystemError.ERROR_SUCCESS : Marshal.GetLastWin32Error(); } } if (err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("Could not retrieve acount name from SID. {0}", SystemExceptionManager.GetDescription(err))); return String.Format(@"{0}\{1}", referencedDomainName.ToString(), name.ToString()); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException("Could not retrieve acount name from SID", ex); } } private enum SID_NAME_USE { SidTypeUser = 1, SidTypeGroup, SidTypeDomain, SidTypeAlias, SidTypeWellKnownGroup, SidTypeDeletedAccount, SidTypeInvalid, SidTypeUnknown, SidTypeComputer } [DllImport("advapi32.dll", EntryPoint = "GetLengthSid", CharSet = CharSet.Auto)] private static extern int GetLengthSid(IntPtr pSID); [DllImport("advapi32.dll", SetLastError = true)] private static extern bool ConvertStringSidToSid( string StringSid, out IntPtr ptrSid); [DllImport("advapi32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern bool LookupAccountSid( string lpSystemName, [MarshalAs(UnmanagedType.LPArray)] byte[] Sid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse); private static bool LookupAccountSid( string lpSystemName, string stringSid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse) { byte[] SID = null; IntPtr SID_ptr = IntPtr.Zero; try { WindowsUserManager.ConvertStringSidToSid(stringSid, out SID_ptr); int err = SID_ptr == IntPtr.Zero ? Marshal.GetLastWin32Error() : (int)ESystemError.ERROR_SUCCESS; if (SID_ptr == IntPtr.Zero || err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}", stringSid, SystemExceptionManager.GetDescription(err))); int size = (int)GetLengthSid(SID_ptr); SID = new byte[size]; Marshal.Copy(SID_ptr, SID, 0, size); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}.", stringSid, ex.Message), ex); } finally { // Always want to release the SID_ptr (if it exists) to avoid memory leaks. if (SID_ptr != IntPtr.Zero) Marshal.FreeHGlobal(SID_ptr); } return WindowsUserManager.LookupAccountSid(lpSystemName, SID, lpName, ref cchName, ReferencedDomainName, ref cchReferencedDomainName, out peUse); } }

  Read the article

• WCF- Large Data

  - by Pinu

  I have a WCF Web Service with basicHTTPBinding , the server side the transfer mode is streamedRequest as the client will be sending us large file in the form of memory stream. But on client side when i use transfer mode as streamedRequest its giving me a this errro "The remote server returned an error: (400) Bad Request" And when i look in to trace information , i see this as the error message Exception: There is a problem with the XML that was received from the network. See inner exception for more details. InnerException: The body of the message cannot be read because it is empty. I am able to send up to 5MB of data using trasfermode as buffered , but it will effect the performance of my web service in the long run , if there are many clients who are trying to access the service in buffered transfer mode. SmartConnect.Service1Client Serv = new SmartConnectClient.SmartConnect.Service1Client(); SmartConnect.OrderCertMailResponse OrderCert = new SmartConnectClient.SmartConnect.OrderCertMailResponse(); OrderCert.UserID = "abcd"; OrderCert.Password = "7a80f6623"; OrderCert.SoftwareKey = "90af1"; string applicationDirectory = @"\\inid\utty\Bran"; byte[] CertMail = File.ReadAllBytes(applicationDirectory + @"\5mb_test.zip"); MemoryStream str = new MemoryStream(CertMail); //OrderCert.Color = true; //OrderCert.Duplex = false; //OrderCert.FirstClass = true; //OrderCert.File = str; //OrderCert.ReturnAddress1 = "Test123"; //OrderCert.ReturnAddress2 = "Test123"; //OrderCert.ReturnAddress3 = "Test123"; //OrderCert.ReturnAddress4 = "Test123"; OrderCert.File = str; //string OrderNumber = ""; //string Password = OrderCert.Password; //int ReturnCode = 0; //string ReturnMessage = ""; //string SoftwareKey = OrderCert.SoftwareKey; //string UserID = OrderCert.UserID; //OrderCert.File = str; MemoryStream FileStr = str; Serv.OrderCertMail(OrderCert); // Serv.OrderCertMail(ref OrderNumber, ref Password, ref ReturnCode, ref ReturnMessage, ref SoftwareKey, ref UserID, ref FileStr ); lblON.Text = OrderCert.OrderNumber; Serv.Close(); // My Web Service - Service Contract [OperationContract] OrderCertMailResponse OrderCertMail(OrderCertMailResponse OrderCertMail); [MessageContract] public class OrderCertMailResponse { string userID = ""; string password = ""; string softwareID = ""; MemoryStream file = null; //MemoryStream str = null; [MessageHeader] //[DataMember] public string UserID { get { return userID; } set { userID = value; } } [MessageHeader] //[DataMember] public string Password { get { return password; } set { password = value; } } [MessageHeader] //[DataMember] public string SoftwareKey { get { return softwareID; } set { softwareID = value; } } [MessageBodyMember] // [DataMember] public MemoryStream File { get { return file; } set { file = value; } } [MessageHeader] //[DataMember] public string ReturnMessage; [MessageHeader] //[DataMember] public int ReturnCode; [MessageHeader] public string OrderNumber; //// Control file fields //[MessageHeader] ////[DataMember] //public string ReturnAddress1; //[MessageHeader] ////[DataMember] //public string ReturnAddress2; //[MessageHeader] ////[DataMember] //public string ReturnAddress3; //[MessageHeader] ////[DataMember] //public string ReturnAddress4; //[MessageHeader] ////[DataMember] //public bool FirstClass; //[MessageHeader] ////[DataMember] //public bool Color; //[MessageHeader] ////[DataMember] //public bool Duplex; } [ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class Service1 : IService1 { public OrderCertMailResponse OrderCertMail(OrderCertMailResponse OrderCertMail) { OrderService CertOrder = new OrderService(); ClientUserInfo Info = new ClientUserInfo(); ControlFileInfo Control = new ControlFileInfo(); //Info.Password = "f2496623"; // hard coded password for development testing purposes //Info.SoftwareKey = "6dbb71"; // hard coded software key this is a developement software key //Info.UserName = "sdfs"; // hard coded UserID - for testing Info.UserName = OrderCertMail.UserID.ToString(); Info.Password = OrderCertMail.Password.ToString(); Info.SoftwareKey = OrderCertMail.SoftwareKey.ToString(); //Control.ReturnAddress1 = OrderCertMail.ReturnAddress1; //Control.ReturnAddress2 = OrderCertMail.ReturnAddress2; //Control.ReturnAddress3 = OrderCertMail.ReturnAddress3; //Control.ReturnAddress4 = OrderCertMail.ReturnAddress4; //Control.CertMailFirstClass = OrderCertMail.FirstClass; //Control.CertMailColor = OrderCertMail.Color; //Control.CertMailDuplex = OrderCertMail.Duplex; //byte[] CertFile = new byte[0]; //byte[] CertFile = null; //string applicationDirectory = @"\\intrepid\utility\Bryan"; // byte[] CertMailFile = File.ReadAllBytes(applicationDirectory + @"\3mb_test.zip"); //MemoryStream str = new MemoryStream(CertMailFile); OrderCertMailResponseClass OrderCertResponse = CertOrder.OrderCertmail(Info,Control,OrderCertMail.File); OrderCertMail.ReturnMessage = OrderCertResponse.ReturnMessage.ToString(); OrderCertMail.ReturnCode = Convert.ToInt32(OrderCertResponse.ReturnCode.ToString()); OrderCertMail.OrderNumber = OrderCertResponse.OrderNumber; return OrderCertMail; }

  Read the article

• On StringComparison Values

  - by Jesse

  When you use the .NET Framework’s String.Equals and String.Compare methods do you use an overloStringComparison enumeration value? If not, you should be because the value provided for that StringComparison argument can have a big impact on the results of your string comparison. The StringComparison enumeration defines values that fall into three different major categories: Culture-sensitive comparison using a specific culture, defaulted to the Thread.CurrentThread.CurrentCulture value (StringComparison.CurrentCulture and StringComparison.CurrentCutlureIgnoreCase) Invariant culture comparison (StringComparison.InvariantCulture and StringComparison.InvariantCultureIgnoreCase) Ordinal (byte-by-byte) comparison of  (StringComparison.Ordinal and StringComparison.OrdinalIgnoreCase) There is a lot of great material available that detail the technical ins and outs of these different string comparison approaches. If you’re at all interested in the topic these two MSDN articles are worth a read: Best Practices For Using Strings in the .NET Framework: http://msdn.microsoft.com/en-us/library/dd465121.aspx How To Compare Strings: http://msdn.microsoft.com/en-us/library/cc165449.aspx Those articles cover the technical details of string comparison well enough that I’m not going to reiterate them here other than to say that the upshot is that you typically want to use the culture-sensitive comparison whenever you’re comparing strings that were entered by or will be displayed to users and the ordinal comparison in nearly all other cases. So where does that leave the invariant culture comparisons? The “Best Practices For Using Strings in the .NET Framework” article has the following to say: “On balance, the invariant culture has very few properties that make it useful for comparison. It does comparison in a linguistically relevant manner, which prevents it from guaranteeing full symbolic equivalence, but it is not the choice for display in any culture. One of the few reasons to use StringComparison.InvariantCulture for comparison is to persist ordered data for a cross-culturally identical display. For example, if a large data file that contains a list of sorted identifiers for display accompanies an application, adding to this list would require an insertion with invariant-style sorting.” I don’t know about you, but I feel like that paragraph is a bit lacking. Are there really any “real world” reasons to use the invariant culture comparison? I think the answer to this question is, “yes”, but in order to understand why we should first think about what the invariant culture comparison really does. The invariant culture comparison is really just a culture-sensitive comparison using a special invariant culture (Michael Kaplan has a great post on the history of the invariant culture on his blog: http://blogs.msdn.com/b/michkap/archive/2004/12/29/344136.aspx). This means that the invariant culture comparison will apply the linguistic customs defined by the invariant culture which are guaranteed not to differ between different machines or execution contexts. This sort of consistently does prove useful if you needed to maintain a list of strings that are sorted in a meaningful and consistent way regardless of the user viewing them or the machine on which they are being viewed. Example: Prototype Names Let’s say that you work for a large multi-national toy company with branch offices in 10 different countries. Each year the company would work on 15-25 new toy prototypes each of which is assigned a “code name” while it is under development. Coming up with fun new code names is a big part of the company culture that everyone really enjoys, so to be fair the CEO of the company spent a lot of time coming up with a prototype naming scheme that would be fun for everyone to participate in, fair to all of the different branch locations, and accessible to all members of the organization regardless of the country they were from and the language that they spoke. Each new prototype will get a code name that begins with a letter following the previously created name using the alphabetical order of the Latin/Roman alphabet. Each new year prototype names would start back at “A”. The country that leads the prototype development effort gets to choose the name in their native language. (An appropriate Romanization system will be used for countries where the primary language is not written in the Latin/Roman alphabet. For example, the Pinyin system could be used for Chinese). To avoid repeating names, a list of all current and past prototype names will be maintained on each branch location’s company intranet site. Assuming that maintaining a single pre-sorted list is not feasible among all of the highly distributed intranet implementations, what string comparison method would you use to sort each year’s list of prototype names so that the list is both meaningful and consistent regardless of the country within which the list is being viewed? Sorting the list with a culture-sensitive comparison using the default configured culture on each country’s intranet server the list would probably work most of the time, but subtle differences between cultures could mean that two different people would see a list that was sorted slightly differently. The CEO wants the prototype names to be a unifying aspect of company culture and is adamant that everyone see the the same list sorted in the same order and there’s no way to guarantee a consistent sort across different cultures using the culture-sensitive string comparison rules. The culture-sensitive sort would produce a meaningful list for the specific user viewing it, but it wouldn’t always be consistent between different users. Sorting with the ordinal comparison would certainly be consistent regardless of the user viewing it, but would it be meaningful? Let’s say that the current year’s prototype name list looks like this: Antílope (Spanish) Babouin (French) Cahoun (Czech) Diamond (English) Flosse (German) If you were to sort this list using ordinal rules you’d end up with: Antílope Babouin Diamond Flosse Cahoun This sort is no good because the entry for “C” appears the bottom of the list after “F”. This is because the Czech entry for the letter “C” makes use of a diacritic (accent mark). The ordinal string comparison does a byte-by-byte comparison of the code points that make up each character in the string and the code point for the “C” with the diacritic mark is higher than any letter without a diacritic mark, which pushes that entry to the bottom of the sorted list. The CEO wants each country to be able to create prototype names in their native language, which means we need to allow for names that might begin with letters that have diacritics, so ordinal sorting kills the meaningfulness of the list. As it turns out, this situation is actually well-suited for the invariant culture comparison. The invariant culture accounts for linguistically relevant factors like the use of diacritics but will provide a consistent sort across all machines that perform the sort. Now that we’ve walked through this example, the following line from the “Best Practices For Using Strings in the .NET Framework” makes a lot more sense: One of the few reasons to use StringComparison.InvariantCulture for comparison is to persist ordered data for a cross-culturally identical display That line describes the prototype name example perfectly: we need a way to persist ordered data for a cross-culturally identical display. While this example is 100% made-up, I think it illustrates that there are indeed real-world situations where the invariant culture comparison is useful.

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >