Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 55/176 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Microphone on a Dell Vostro 3360

  - by Pilb

  After upgrading my vostro 3360 on Ubuntu 12.04, I saw that drivers were not available for this version (notably for network). So I decided to install 11.10 but the mic still doesn't work (notably on Skype, Gtalk etc.) I join the model of the audio device and the drivers which were installed before I upgraded to ubuntu 12.04 (I succeeded only in installing the network one) Can you help me to find the solution to this problem with my microphone? Thanks , Pilb. Message in French : Bonjour, Après que je me sois rendu compte d'une anomalie dans la gestion du micro (sous Gtalk), j'ai essayé différentes solutions sans succès (1 2 et 3) Mon ordinateur dell vostro 3360 m'a été livré sous ubuntu 11.10, j'ai voulu le mettre sous 12.04 mais les drivers n'étaient pas compatibles. Je suis donc revenu sur Oneiric mais sans les drivers installés par Dell en usine. néanmoins, j'ai pris soin de noter leurs références (sans toutefois savoir si le micro fonctionne avec ces pilotes, mais cela me semble possible). Pourriez-vous me dire s'il est possible d'installer ces pilotes ? Ou alors si vous avez une solution concernant ce problème de micro ? Modèle de la carte son : Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Alsa-hda-cirrus-oneiric driver in DKMS format (notamment) Dell-laptop-oneiric friver in DKMS format ethernet-alx oneiric driver in DKMS format Je vous remercie d'avance de votre aide et vous souhaite une bonne journée ! Pilb.

  Read the article

• Stable ubuntu distribution for a broadcom bcm4313 wireless driver and an nvidia 630 graphics adapter

  - by Vivek Pradhan

  I have been trying to completely shift to ubuntu or a linux distro for almost 2 years now. I have tried all the ubuntu distros starting from 10.04 through 11.10, but there has always been some bugs with the display drivers or the wireless cards not being recognised and the additional drivers suggested from the ubuntu community not doing the trick always. I tried a lot to fix bugs, checked a lot of forums, launch pad, got some of them fixed, but could not really get a neat and complete ubuntu machine set up till now. Now I really like the whole open source community and the linux platform, my pc at home runs ubuntu 11.04 perfectly but there have been some glitches always with ubuntu on my laptop that has forced me to stick with windows only. Now I am currently on an hp dv6 laptop that has the broadcom bcm4313 wireless driver and the nvidia 630gtm graphics(optimus) driver. Now I tried to do some research on the support of these drivers in linux machines but could not get anywhere. So I would really appreciate if you guys could suggest some linux distro that I could use that has full support of these drivers or has stable bug fixes for these kind of issues. I tried precise pangolin (LTS) through a live CD but i still see a problem with wifi networks which is a little frustrating. Please help me find the perfect match for my laptop :P I would gladly provide any other information necessary.

  Read the article

• How do I get Intel 845g graphics working?

  - by Rayson Jimenez

  I need help enabling Intel 845g to run with intel drivers. I'v looked everywhere on the net with no joy. I can't seem to get intel video drivers to load the gui, only with vesa drivers. it drops me straight to the shell prompt. Xorg.0.log shows the following. Any help would be GREATLY appreciated. [ 244.843] (II) LoadModule: "intel" [ 244.843] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 244.844] (II) Module intel: vendor="X.Org Foundation" [ 244.844] compiled for 1.9.0, module version = 2.12.0 [ 244.844] Module class: X.Org Video Driver [ 244.844] ABI class: X.Org Video Driver, version 8.0 [ 244.844] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 244.844] (--) using VT number 8 [ 244.971] (EE) intel(0): No kernel modesetting driver detected. [ 244.971] (II) UnloadModule: "intel" [ 244.971] (EE) Screen(s) found, but none have a usable configuration. [ 244.971] Fatal server error: [ 244.971] no screens found [ 244.971] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 244.971] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 244.971] [ 245.213] ddxSigGiveUp: Closing log

  Read the article

• Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

  - by Thunder

  I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

  Read the article

• opengl libraries for ubuntu running on Virtual Box

  - by vboxuser

  I am having Ubuntu 10.04 running on VirtualBox. Guest additions are installed successfully. But Guest additions do not provide the OpenGL library. To run open GL demo what needs to be installed. Some google links suggest Mesa utils. By my understanding is Mesa utils do not use vbox drivers to achieve hardware acceleration. Ubuntu 10.04 is running on VirtualBox and not on bare metal. The host comprise of Zx400 CPU with nvidia graphics driver. But this is not relevant since I would be using the vbox drivers provided by guest additions on VirtualBox. In this scenario how do I get OpenGL libraries on Ubuntu?. (Specially I am looking for solution other than Mesa, since mesa has support only for VMware and not for VirtualBox) How to get Opengl libraries which use vbox drivers for 3D hardware accleration?? As i already mentioned, ubuntu 10.04 is running on VirtualBox and not on bare metal. the host comprise of Zx400 CPU with nvidia graphics driver. but this is not relevant since i would be using the vbox drivers provided by guest additions on VirtualBox. In this scenario how to i get OpenGL libraries on Ubuntu. (Especially i am looking for solution other than Mesa, since mesa has support only for VMware and not for VirtualBox Thank you

  Read the article

• How to get Nvidia graphics working on Sony Z laptop?

  - by projectshave

  I have an older Sony VAIO Z 590 laptop with switchable graphics between Intel and Nvidia GeForce 9300M. It is NOT Optimus. I did a clean install of Ubuntu 12.04. Everything works, but it's using Unity 2D with the Intel drivers. I've tried loading the Nvidia drivers from "Additional Drivers", but it says "this driver is activated but not currently in use". When I run "nvidia-settings", an error window pops up to say "You do not appear to be using the NVIDIA X drivers." "lspci" shows both graphics cards. Let me know if I should add more info. How do I get the Nvidia graphics and Unity 3D working? More info: $ lshw -short -class display H/W path Device Class Description ============================================== /0/100/1/0 display G98 [GeForce 9300M GS] /0/100/2 display Mobile 4 Series Chipset Integrated Graphics C $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Excerpts from Xorg.0.log: [ 16.373] (II) LoadModule: "glx" [ 16.373] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 16.386] (II) Module glx: vendor="NVIDIA Corporation" [ 16.386] compiled for 4.0.2, module version = 1.0.0 [ 16.386] Module class: X.Org Server Extension [ 16.386] (II) NVIDIA GLX Module 295.49 Tue May 1 00:09:10 PDT 2012 [ 16.608] (II) NVIDIA dlloader X Driver 295.49 Mon Apr 30 23:48:24 PDT 2012 [ 16.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 17.693] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

  Read the article

• I have problem on 12.10 64bit with nvidia graphics driver opensource and proprietary ! Can't change resolution on 3d games

  - by digitalcrow

  I have problem with nvidia graphics driver opensource and proprietary ! Can't change resolution on 3d games and there's a bug there are no kernel sources installed and thus jockey can't install proprietary drivers. I can't change resolution while on games fullscreen. I tried to install proprietary driver and i couldn't plus i couldn't login to ubuntu it showed only the desktop photo no dash no nothing. -tried to install kernel sources and blacklist+remove Nouveau drivers and then installed the proprietary drivers i hope succesfully. -The problem is the same i can't change resolution on 3d games while on fullscreen. I've installed the sources and be able to install the proprietary nvidia drivers but the problem remains, look what i got in the output of a 3d game exited while i tried to change resolution: X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 150 (XFree86-VidModeExtension) Minor opcode of failed request: 10 (XF86VidModeSwitchToMode) Value in failed request: 0x25b Serial number of failed request: 497 Current serial number in output stream: 499 I'm giving you more details about my system: i have an nvidia geforce gts 250 , 3,4 ghz quadcore amd phenom2 , 8gbytes of ram. The output of: sudo lshw -C display; lsb_release -a; uname -a Is the following: *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ef00(size=128) memory:fb000000-fb01ffff No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux darkpc 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I like ubuntu's style and user interface but i hate the bad quality of work they do.

  Read the article

• Complete Guide to Networking Windows 7 with XP and Vista

  - by Mysticgeek

  Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Brightness control not working in Lenovo G580

  - by shijo

  I purchased a new Lenovo g580 laptop. But I am totally disappointed when I installed Ubuntu on it. Almost all drivers are not working. :-( The laptop configuration is intel i3 processor Nvidia GeForce 610M graphics card. I couldn't find the nvidia drivers in the additional drivers (jockey). The main problem is that the brightness control not working. I tried lots of methods explained in this site, but the result again disappointed me. I am a student and I am using Linux, and the brightness control is the most urgent problem that have to be solved. So experts please give me a solution. thanks in advance

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Can't connect to wifi after 13.10 update - Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01)

  - by user1952119

  I updated Ubuntu to 13.10 last night and wifi was working fine until I went to wake up my computer this morning and no WiFi connection. I am on a iMac with Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01). The only solutions I have seen so far are for broadcomm WiFi drivers. There is no wifi driver in addition drivers only graphics drivers. Not sure how to fix this, Any help would be greatly appreciated. UPDATE: WiFi works after reboot but doesn't after being put to sleep nor does Ethernet connect after sleep.

  Read the article

• “No Network Devices Available” for BCM43241(SDIO) after fresh install of 13.10

  - by 200gaga

  I have a laptop vaio duo 13 which has a broadcom 43241 wireless card. My problem is similar to this one Broadcom Wi-Fi Adapter not recognized . I tried to install the driver brcmfmac(SDIO) here http://wireless.kernel.org/en/users/Drivers/brcm80211 and copied the nvram to /lib/firmware/brcm as the page tells, but this didn't work. Most questions I searched are about br43 such as How to Install Broadcom Wireless Drivers (BCM43xx) . I tried part of solution like unblock all in rfkill, put an # in front of blacklist bcm43xx, but none worked. I didn't uninstall or install any drivers such as b43-installer, b43legacy-installer, bcmwl-kernel-source (only tried b43-fwcutter) because they are not compatible with bcm43241. Above is all information I can provide for help. Thanks.

  Read the article

• Part 1 - 12c Database and WLS - Overview

  - by Steve Felts

  The download of Oracle 12c database became available on June 25, 2013.  There are some big new features in 12c database and WebLogic Server will take advantage of them. Immediately, we will support using 12c database and drivers with WLS 10.3.6 and 12.1.1.  When the next version of WLS ships, additional functionality will be supported (those rows in the table below with all "No" values will get a "Yes).  The following table maps the Oracle 12c Database features supported with various combinations of currently available WLS releases, 11g and 12c Drivers, and 11g and 12c Databases. Feature WebLogic Server 10.3.6/12.1.1 with 11g drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 11g drivers and 12c DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 12c DB JDBC replay No No No Yes (Active GridLink only in 10.3.6, add generic in 12.1.1) Multi Tenant Database No Yes (except set container) No Yes (except set container) Dynamic switching between Tenants No No No No Database Resident Connection pooling (DRCP) No No No No Oracle Notification Service (ONS) auto configuration No No No No Global Database Services (GDS) No Yes (Active GridLink only) No Yes (Active GridLink only) JDBC 4.1 (using ojdbc7.jar files & JDK 7) No No Yes Yes  The My Oracle Support (MOS) document covering this is "WebLogic Server 12.1.1 and 10.3.6 Support for Oracle 12c Database [ID 1564509.1]" at the link https://support.oracle.com/epmos/faces/DocumentDisplay?id=1564509.1. The following documents are also key references:12c Oracle Database Developer Guide http://docs.oracle.com/cd/E16655_01/appdev.121/e17620/toc.htm 12c Oracle Database Administrator's Guide http://docs.oracle.com/cd/E16655_01/server.121/e17636/toc.htm . I plan to write some related blog articles not to duplicate existing product documentation but to introduce the features, provide some examples, and tie together some information to make it easier to understand. How do you get started with 12c?  The easiest way is to point your data source at a 12c database.  The only change on the WLS side is to update the URL in your data source (assuming that you are not just upgrading your database).  You can continue to use the 11.2.0.3 driver jar files that shipped with WLS 10.3.6 or 12.1.1.  You shouldn't see any changes in your application.  You can take advantage of enhancements on the database side that don't affect the mid-tier.  On the WLS side, you can take advantage of using Global Data Service or connecting to a tenant in a multi-tenant database transparently. If you want to use the 12c client jar files, it's a bit of work because they aren't shipped with WLS and you can't just drop in ojdbc6.jar as in the old days.  You need to use a matched set of jar files and they need to come before existing jar files in the CLASSPATH.  The MOS article is written from the standpoint that you need to get the jar files directly - download almost 1G and install over 600M footprint to get 15 jar files.  Assuming that you have the database installed and you can get access to the installation (or ask the DBA), you need to copy the 15 jar files to each machine with a WLS installation and get them in your CLASSPATH.  You can play with setting the PRE_CLASSPATH but the more practical approach may be to just update WL_HOME/common/bin/commEnv.sh directly.  There's a change in the transaction completion behavior (read the MOS) so if you think you might run into that, you will want to set -Doracle.jdbc.autoCommitSpecCompliant=false.  Also if you are running with Active GridLink, you must set -Doracle.ucp.PreWLS1212Compatible=true (how's that for telling you that this is fixed in WLS 12.1.2).  Once you get the configuration out of the way, you can start using the new ojdbc7.jar in place of the ojdbc6.jar to get the new JDBC 4.1 API's.  You can also start using Application Continuity.  This feature is also known as JDBC Replay because when a connection fails you get a new one with all JDBC operations up to the failure point automatically replayed.  As you might expect, there are some limitations but it's an interesting feature.  Obviously I'm going to focus on the 12c database features that we can leverage in WLS data source.  You will need to read other sources or the product documentation to get all of the new features.

  Read the article

• Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

  - by Matthew Carroll

  I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

  Read the article

• Black screen after installing ubuntu 11.10 on new pc

  - by wouter205

  Could anyone troubleshoot me please; After installing ubuntu on my fresh desktop, the ubuntu loading screen shortly appears and then I get a black screen and cannot access the login screen. When booting in failsafe modus, i get a message that ubuntu failed to load failsafe video drivers. I have a radeon 6850 video card and am able to start ubuntu live session. So I guess it loads the wrong drivers upon booting from hd. I remember a file in which you could change which drivers it should load, but forgot the exact location. Could this solve my problem (or another solution)

  Read the article

• Are all "Important security updates", updates to already installed packages?

  - by Omnicomment

  I'm running 12.04, and I've never downloaded any drivers for the installation of any peripheral devices. Yet, I noticed a fair few "Important security updates" involving drivers/utilities for HP devices/software. I understand if the default installation of Ubuntu came with a set of drivers for these devices - and the update manager, having noticed that they live on my system, went and found newer versions, but still - given I don't use any devices - I'm either forced to download an irrelevant update, sift through the updates to check applicability, or turn off Update Manager altogether: none of which are desirable. First; the obvious - can someone confirm that the list of "Important security updates" on the server that Update manager connects to, is not actually populated with every patch ever written (i.e. for all Ubuntu packages regardless of whether they're installed or not)? Unlikely, but..

  Read the article

• NVIDIA 560 TI driver install ubuntu 14.04 leads to "missing on display" error

  - by allthosemiles

  Currently on my Ubuntu 14.04 install, I boot it up install the latest updates and attempt to install the NVIDIA drivers from xorg-edgers while following the top answer on this post Installing Nvidia Drivers It installs 304 for my card and when I check the "glxinfo | grep OpenGL" I have about 8 lines that read Xlib: extension "NV-GLX" missing on display ":0". I did the "sudo apt-get install nvidia-current" to get the latest. I install it but didn't see any errors in the terminal. I'm not sure what I'm doing wrong here. I'm not a complete beginner with Linux so I can find my way around just fine but I can't find a solution to this issue. Should I have done one of these two instead? sudo apt-get install nvidia-304 sudo apt-get install nvidia-graphics-drivers-304

  Read the article

• Why is my fan constatnly blowing in Ubuntu?

  - by Derfder

  I have installed Ubuntu 13.04 (64-bits) alongside Windows 7 on different partition on my second desktop. It's working nice. I have updated everything. However, I have problems with my fan. It's blowing non-stop and very fast(loud). I haven't these problems in Windows 7 where it works nicely. How to update drivers for my fan or something else? My desktop is: HP Pro 3410 Microtower PC. Graphic card: AMD Radeon HD 6570 Board: 2A9C 1.1 Bus Clock: 133 megahertz BIOS: American Megatrends Inc. 6.14 11/05/2010 Processor: 3,20 gigahertz Intel Core i3 550 DRIVERS I HAVE TRIED FOR MY GRAPHIC CARD: I have tried these drivers so far: xserver-xorg-video-ati, version: 1:7.1.0-0ubuntu2 fglrx Version: 2:9.010-0ubuntu3 fglrx-updates Version 2:9.012-0ubuntu1 But the fan is still blowing like a maniac. I have tried to install Linux Mint 15 previously and I have had the same problems with the fan. Any idea how to fix it?

  Read the article

• Booting briefly shows CLI login and then black

  - by lepusfelix

  When I boot to Ubuntu on my dualboot system, it appears to boot normally, up to the point when I would normally expect to see the lightDM graphical login screen. However, I see a CLI login screen, which I assume is tty1. Before I get a chance to actually login to it, though, it drops to a black screen with a flashing cursor. Pressing ctrl+alt+f1 does nothing. When I hit the power button on the laptop, I see the usual scrolling text as Ubuntu shuts down. I know that this is related to me having installed the proprietary ATI drivers for the video card. Purging the drivers gave me back a GUI, but unfortunately no working desktop environment, and switching to the mesa drivers returned me to the black screen issue. The only way I can get a stable working CLI is through booting to advanced options and choosing a root shell prompt, as even the failsafe X session doesn't function for me.

  Read the article

• LIRC-ZILOG on ubuntu 12.04

  - by aoman

  I followed these guides to configure a Hauppauge PVR, and after compiling the hpvr modules, I have this problem: (that also includes the zilog one) # locate zilog /lib/modules/3.2.0-29-generic/kernel/drivers/staging/media/lirc/lirc_zilog.ko /lib/modules/3.2.0-34-generic/kernel/drivers/staging/media/lirc/lirc_zilog.ko /usr/src/linux-headers-3.2.0-29-generic/include/config/lirc/zilog.h sudo modprobe lirc_zilog FATAL: Error inserting lirc_zilog (/lib/modules/3.2.0-34-generic/kernel/drivers/staging/media/lirc/lirc_zilog.ko): Invalid argument The PVR works and I can get a test video with sound. The remote does not. I want the transmitter to work so it can automatically change the channel on the cable box and find the video I wanted to record. The LIRC sources are not on Ubuntu sources and so I can only guess at what commands I might have to use. How do I resolve the error and get the remote working?

  Read the article

• 11.10 runs really choppy and slow, but not if I choose "Gnome Classic"

  - by Ingram

  I'd like to use Unity with Ubuntu 11.10, but everything from Unity runs really choppy and slow. I have an ATI graphics card and I have installed the drivers through "Additional Drivers". The drivers work, as I can play 3d games flawlessly. When I drag the mouse box around or drag windows around, it is really choppy. I previously had Ubuntu 10.10 and everything worked fine. I installed gnome 3 on 11.10 and it does the same thing Unity does, very choppy and slow graphics. However, if I choose Gnome Classic, everything is fine. I can drag the mouse box all around with no problems. I can drag windows around and it looks and feels great. Is this a bug with Unity? Are others experiencing this? Or is there something I can do to fix this?

  Read the article

• Samsung driver for notebooks in Natty?

  - by burli

  Hi, I have a Samsung N150 Netbook and I installed Unity 11.04 to make some tests. But some functions do not work like backlight and vertical scroll on the touchpad. There are drivers for samsung notbooks and I know that there is a PPA. But not for Natty. Will the drivers be avalible some day in the kernel by default? Will Canonical add these drivers in the kernel, if the Kernel developers wont? I think this would be very usefull because Unity is great for Netbooks and Samsung Netbooks are really nice.

  Read the article

• Asus 1215n GPU driver/s don't give me a "full" OS experience

  - by AFD

  I'm use to not having specific drivers from a manufacture on my laptop when running a Linux OS and that has always been fine - there's been adequate FOSS drivers for my needs and it hasn't ruined any of my OS experience. When I bought an Asus 1215n one of the upsides to the hardware seemed to be the switchable GPU that could give lots of performance or lots more battery life and would switch on-the-fly... with Windows of course. Seems that the Nvidia driver are crap and people advise not installing them. I have some sort of workaround for vga_switcharoo (?) and the on-the-fly nature of the GPUs has turned in to a manual one :( The worst bit though (aside from shorter battery life) is the web experience with HTML5. If I visit Mozilla's Web O'Wonder site I'm told I don't have WebGL working due to driver issues. This really blows - is it possible that proprietary drivers can now ruin my web experience too?!

  Read the article

• Error when trying to activate FGLRX graphic propietary control ATI/AMD

  - by Gastón

  I'm new to Ubuntu. I still don't understand a lot of features. As far as I know, I can install the ATI drivers through the Additional drivers When I press 'Activate' in the FGLRX graphic propietary control ATI/AMD it comes up with an error. Lo sentimos, la instalación de este controlador falló. Revise el archivo de registro para ver más detalles: /var/log/jockey.log English translation: Sorry, this driver installation failed. Check the log file for more details: /var/log/jockey.log The problem is that i'm trying to make Compiz work. And since i have no video card drivers i cant modify any of the interface features (Like 3d cube and that stuff).

  Read the article

• Ubuntu 14.04 doesn't detect my discrete GPU

  - by user258887

  I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >