Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 59/176 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Permission issues causes Unity Segmentation fault

  - by Dj Gilcrease

  I upgraded from 13.04 to 13.10 and I can boot to the unity-greeter and login just fine, but after login I just get a black screen with a cursor. I have tried following http://help.ubuntu.com/community/BinaryDriverHowto/ATI http://help.ubuntu.com/community/RadeonDriver and the manual install of the downloaded AMD drivers. All have the same affect. Also I have read Black screen after login with cursor I get a black screen after logging in ubuntu 13.04 black screen after login Ubuntu 13.10 - Black screen after login session Ubuntu 13.04 - Black screen with unresponsive cursor Upgrade to Ubuntu 13.04 Problem - Boots into Blank Black Screen All of which were no further help then the two support articles about ATI drivers So I switched back to the default drivers and went a little further into debugging, when I do ctrl+alt+F1 and login and try unity --debug > unity_start.log then ctrl+alt+F8 the screen stays black with a cursor and when I switch back ctrl+alt+F1 the contents of the log output are http://pastebin.com/rdQG4Hb0 However when I try sudo unity --debug > unity_start_root.log then ctrl+alt+F8, unity starts and the output of the log is http://pastebin.com/Yv4RD2j7 The fact that it starts as root tells be it is either a permissions issue of some required file or there is some setting that is specific to my user that is causing the SIGSEGV. So to narrow this down I activated the guest account and tried to login and got the same black screens with only a mouse cursor, so this tells me that it is not a configuration issue, but a permissions issue, so how do I narrow down which file has the wrong permissions? Also is there anything further that may help debug this issue? Ok after a few more hours of googling I found that if I add myself to the video group I can login and see the desktop, but there are lots of other permission related issues, so I am thinking something went wonky with PolicyKit during the upgrade, is there a way to reset PolicyKit settings for a user?

  Read the article

• Ubuntu backlight problem with Nvidia graphics

  - by Vladimir

  I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grug acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song)

  Read the article

• hp pavilion g6 1250 wireless problems

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Can't adjust backlight on an Nvidia 335m GT

  - by Vladimir

  I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grub acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song) Some new thoughts... CONFIG_BACKLIGHT_GENERIC=m could this be an issue? Made this by grep BACKLIGHT /boot/config-3.2.0-22-generic-pae Full grep output can be viewed here: http://pastebin.com/sMRd2Z4k

  Read the article

• Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

  - by Kendall Gifford

  I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

  Read the article

• Microphone - static background noise suppression

  - by user1873947

  My soundcard is Realtek ALC 892. On Windows 7 I use official Realtek drivers, on Linux I use PulseAudio (on Ubuntu 13.10). On both Windows and Linux, when I enable microphone boost +30db (required because my microphone is quiet), I get very annoying and loud background noise (I also confirmed the background noise with Audacity on both systems). However, Windows Realtek drivers have noise suppression option which works (after enabling it, Audacity shows no background noise and my ears also confirm that there is no background noise). My question is how can I enable background noise suppression in ALSA/PulseAudio? Is there any module I can install or maybe there is a setting for it that can be enabled in config file? I can't find solution for it and this is the only thing that prevents me from switching to Linux completely - as I talk using microphone a lot and on Windows the Realtek software removes the background noise completely and PulseAudio doesn't remove it, which means the recorded voice on Linux is very bad. I know I could buy better soundcard and microphone, but as I said, Windows Realtek drivers remove the noise on software level in real time (ie no noise when talking on TeamSpeak3/Steam/whatever voip programme) so I hope that there is such option on Linux as well. Thanks in advance! This is also crossposted on Unix StackExchange

  Read the article

• Getting into driver development for linux [closed]

  - by user1103966

  Right now, I've been learning about writing device-drivers for linux 3.2 kernel for about 2 months. So far I have been able program simple char drivers that only read and write to a fictitious dev structure like a file, but now I'm moving to more advance concepts. The new material I've learned about includes I/O port manipulation, memory management, and interrupts. I feel that I have a basic understanding of overall driver operation but, there is still so much that I don't know. My question is this, given that I have the basic theory of how to write a dev-driver for a piece of hardware ... how long would it take to actually develop the skills of writing actual software that companies would want to employ? I plan on getting involved in an open-source project and building a portfolio. Also what type of beginner drivers could I write for hardware that would best help me develop my skills? I was thinking that taking on a project where I design my own key logger would easy and a good assignment to help me understand how IO ports and interrupts are used. I may want to eventually specialize in writing software for video cards or network devices though these devices seem beyond my understanding at the moment. Thanks for any help

  Read the article

• Lenovo Ideapad 205 and Ubuntu 12.04 LTS

  - by Oranges

  I just wanted to report one thing, because I know there are a lot of Ideapad S205 users out there, that had issues running Ubuntu on their Lenovo Ideapad S205 in the past. Lenovo Ideapad with Ubuntu 12.04 LTS: Everything works out of the box. I just installed it and everything, including the microphone, the webcam, the WLAN, the AMD E-350 CPU/GPU and the sound worked right away. In other words: Everything works. Even the AMD E-350 GPU works very well with the Open Source drivers and with the prop. drivers. The prop. drivers were automatically offered to me via Ubuntu itself. It works great. A long idea, written short: I love it. It's extremly stable and very fast. I am using the German version of the Idepad S205, combined with the 32bit version of Ubuntu. There is only one, single thing to keep in mind when installing Ubuntu on the S205: Plugin your USB/CD/DVD drive in the left USB-Port. I don't know why, but it only works with the USB-Port on the left side of the Netbook. This is only for installing Ubuntu. After it has been installed and updated successfully, all of the USB ports will work. Oranges - feedback on Lenovo S205 with Ubuntu 12.04 LTS.

  Read the article

• no disk space, cant use internet

  - by James

  after trying to install drivers using sudo apt-get update && sudo apt-get upgrade, im faced with a message saying no space left on device, i ran disk usage analyzer as root and there was three folders namely, main volume, home folder, and my 116gb hard drive (which is practically empty) yet both other folders are full, which is stopping me installing drivers because of space, how do i get ubuntu to use this space on my hard drive? its causing problems because i cant gain access to the internet as i cant download drivers when i havnt got enough space, this happens every time i try it sudo fdisk -l Disk /dev/sda: 120.0GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003eeed Device Boot Start End Blocks Id System /dev/sda1 * 2048 231315455 115656704 83 Linux /dev/sda2 231317502 234440703 1561601 5 Extended /dev/sda5 231317504 234440703 1561600 82 Linux swap / solaris Output of df -h df: '/media/ubuntu/FB18-ED76': No such file or directory Filesysytem Size Used Avail Use% Mounted on /cow 751M 751M 0 100% / udev 740M 12K 740M 1% /dev tmpfs 151M 792K 150M 1% /run /dev/sr0 794M 794M 0 100% /cdrom /dev/loop0 758M 758M 0 100% /rofs none 4.0K 0 4.0K 0% /sys/fs/cgroup tmpfs 751M 1.4M 749M 1% /tmp none 5.0M 4.0K 5.0M 1% /run/lock none 751M 276K 751M 1% /run/shm none 100M 40K 100M 1% /run/user

  Read the article

• Why does my browser take me to Scour.com? (redirect virus)

  - by Paula DiTallo

  The "scour" or Rootkit.Win32.TDSS virus has a long history which can be found here: http://en.wikipedia.org/wiki/Scour Here is the primary symptom: after searching for something in your web browser using google, one of the results that you click on redirects you to scour.com. If you've executed ClamWin, Malwarebytes, McAfee, Norton, etc. to find and isolate the virus without any luck--this isn't really a surprise, since this virus attaches to existing system drivers. I only know of one reliable package that will remove this without ill effects--like adding new spyware. This package is called TDSSKiller. I have seen multiple websites that claim to have this software available, but the one that I know is reliable is located here: http://support.kaspersky.com/viruses/solutions?qid=208280684 Once you go to Kaspersky's tech support site, the TDSSKiller zip file is available for downloading. When you execute this software, you will be able to "cure" or repair the infected driver. Remember to jot down the name of the driver for future reference--should you need to reinstall the driver from a "same-as" working computer, or your install disk if the repair is ineffective. The driver that happened to get infected on my computer was the tcpip.sys driver. This caused my win sockets to loose their ip addresses. In most other instances, less critical drivers such as HDAudBus.sys are infected. In my case, I was not through correcting my computer problems until I corrected the broken WinSock issue and loaded an earlier version of the tcpip.sys driver from: C:\WINDOWS\ServicePackFiles\i386 which I placed in: C:\WINDOWS\system32\drivers Don't forget to reboot your computer after your repair! Once you download TDSSKiller and cure/repair your infected driver(s), the redirect on google searches should disappear .

  Read the article

• Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, black screen after logging in and lengthy login/logout delays

  - by NahsiN

  Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

  Read the article

• How to check Early Z efficiency on AMD GPU with Windows 7

  - by Suma

  I have a game using DirectX 9, and a development station using Win 7 x64. I am still able to get access to another station with Vista x64 / dual booted with WinXP x86. I wanted to check early Z efficiency in the game and to my sadness all tools I have tried seem to be unable to perform this task: AMD PerfStudio AMD GPUPerfStudio 2 does not support DirectX 9 at all AMD GPUPerfStudio 1.2 does not install correctly on Windows 7. When I have tweaked the MSI package (a simple OS version check adjustment was needed), it complained the drivers I have do not provide needed instrumentation. The drivers old enough to support the GPUPerfStudio would most likely not be able to operate with my Radeon 5750 card (though this is something I am not 100 % sure, I did not attempt to try any older drivers, not knowing which I should look for) PIX PIX does not seem to contain any counters like this. It offers some ATI specific counters, but when I try to activate them, the PIX reports "PIX encountered a problem while attaching to the target program." I do not want to upgrade to DX 10/11 just to be able to profile the game, but it seems without the step I am somewhat locked with a toolset which is no longer supported. I see only one obvious options which would probably work, and that is using WinXP (or with a little bit of luck even Vista) station, perhaps with some older AMD card, to make sure GPUPerfStudio 1.2 works. Other than that, can anyone recommend other options how to check GPU HW counters (HiZ / EarlyZ in particular, but if others would be enabled as well, it would be a nice bonus) for a DirectX 9 game on Windows 7, preferably on AMD GPU? (If that is not possible, I would definitely prefer switching GPU to switching the OS, but before I do so I would like to know if I will not hit the same problem with nVidia again)

  Read the article

• Nvidia optimus and Steam (on 12.04)

  - by Seiryuu

  I've obtained a copy of the .deb for the Steam beta, but it was pretty disappointing to see that it simply doesn't run. Hardware - Dell XPS L502, with Nvidia Optimus I have bumblebee installed. Trying to run Steam with the Intel HD 3000 completely fails to start it. Message received Installing breakpad exception handler for appid(steam)/version(1352224866_client) followed by a crash with no other information provided. Trying to optirun steam runs the client, but as soon as it gets to the home screen, it says that the Nvidia drivers I am using are out of date (and Steam requires newer drivers to run). It's probably worth to note that it throws the same Installing breakpad... error when run with optirun, but it doesn't crash the client immediately. Any way to fix this? Also, is there a way of manually updating the drivers in bumblebee without breaking anything? Alternatively, is there a reliable way of completely disabling the Intel GPU (in order to use the Nvidia GPU exclusively)? Note: I am using Xmonad with gnome-fallback, if that makes a difference. However, when I tried everything mentioned with Unity (2d), everything was the same, so I guess it has nothing to do with the window manager in use.

  Read the article

• Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

  - by Noob.

  Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

  Read the article

• Moodle 2 pages loading up to 2000% faster

  - by TJ

  On average our Moodle 2 pages were loading in 2.8 seconds, now they load in as little as 0.12 seconds, so that’s like 2333.333% faster!What was it I hear you say?Well it was the database connection, or more correctly the database library. I was using FreeTDS http://docs.moodle.org/22/en/Installing_MSSQL_for_PHP, but now I’m using the new Microsoft Drivers 3.0 for PHP for SQL Server http://www.microsoft.com/en-us/download/details.aspx?id=20098. I’m in a Windows Server IT department, and in both our live and development environments, we have Moodle 2.2.3, IIS 7.5, and PHP 5.3.10 running on two Windows Server 2008 R2 servers and using MS Network Load Balancing.Since moving to Moodle 2, the pages have always loaded much more slowly than they did in Moodle 1.9, I’ve been chasing this issue for quite a while. I had previously tried the Microsoft Drivers for PHP for SQL Server 2.0, but my testing showed it was slower than the FreeTDS driver.Then yesterday I found Microsoft had released the new version, Microsoft Drivers 3.0 for PHP for SQL Server, so I thought I’d give it a run, and wow what a difference it made.Pages that were loading in 2.8 seconds, now they load in as little as 0.12 seconds, 2333.333% faster…I have more testing to do, but so far it’s looking good, I have scheduled multi user load testing for early next week (fingers crossed).To make the change all I need to do was,download the driverscopy the relevant files to PHP\ext (for us they were php_pdo_sqlsrv_53_nts.dll and php_sqlsrv_53_nts.dll) install the Microsoft SQL Server 2012 Native Client x64 http://www.microsoft.com/en-us/download/details.aspx?id=29065 add to PHP.ini, extension=php_pdo_sqlsrv_53_nts.dll, extension=php_sqlsrv_53_nts.dllremove form PHP.ini, extension=php_dblib.dllvchange in PHP.ini, mssql.textlimit = 20971520 and mssql.textsize = 20971520change Moodle config.php, $CFG->dbtype = 'sqlsrv'; and 'dbpersist' => Trueand then reboot and test…I've browsed courses, backed up/restored some really large and complicated courses, deleted courses etc. etc. all good.Still more testing to do but, hey this is good start...Hope this helps anyone experiencing the same slowness…

  Read the article

• Laptop battery life drastically decreased compared to Windows 7

  - by Aron Rotteveel

  I am running Ubuntu 10.10 on my Dell Studio XPS 1640 and have about one hour of battery life in it, compared to about 2.5 hours running on Windows 7. This is with wireless and bluetooth on, but still, the difference seems incredible. What could be causing such a difference and is there a way to close the gap without losing core functionality? EDIT: here's some output from powertop. This is with bluetooth turned off and Wifi turned on. The output seems pretty normal to me, but as indicated, this is about 1 hour of battery life on a full battery... Wakeups-from-idle per second : 476.2 interval: 10.0s Power usage (ACPI estimate): 2.5W (1.2 hours) Top causes for wakeups: 30.0% (167.2)D chrome 21.0% (117.3) [extra timer interrupt] 13.9% ( 77.4) [kernel scheduler] Load balancing tick 3.4% ( 18.9)D xchat 7.1% ( 39.8) [iwlagn] <interrupt> 5.9% ( 32.9) AptanaStudio3 3.9% ( 21.6)D java 2.7% ( 14.9) [TLB shootdowns] <kernel IPI> 2.5% ( 14.1) docky 1.8% ( 10.0) nautilus 1.6% ( 9.0) thunderbird-bin 1.0% ( 5.5) [ahci] <interrupt> 0.9% ( 5.0) syndaemon 0.8% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer) EDIT: after changing /proc/sys/vm/laptop_mode to 5 (it was set to 0), wakeups seem to have decreased, although usage still seems far too high: Wakeups-from-idle per second : 263.8 interval: 10.0s Power usage (ACPI estimate): 2.6W (0.9 hours) EDIT: I seem to have discovered the main cause: I was using the open source ATI Drivers. I recently installed the official ATI drivers and laptop battery life seems to have doubled since. EDIT: last edit. The previous 'solution' of installing the official ATI drivers turns out to be a non-solution. Although it does increase battery life, my laptop resolution is maxed out at 1200x800 after a reboot. (Please note that this problem does not need answering in this question as it is a seperate case)

  Read the article

• How to sync Ubuntu/software/configurations between N computers with free software and/or without a cloud?

  - by skanatek

  Note: this question is not about syncing data in a Dropbox-like way (files, folders), it is more about syncing configurations. I would like to have exactly the same version of Ubuntu with all the software installed and configured both on my Desktop PC and on my Laptop PC (and maybe on my small netbook PC) without using Ubuntu Sync and with minimal maintenance effort (setup once, run for a long time). The use case is the following: I work on my Laptop PC and do some changes to software configuration, for example: configure vim to have a new plugin update the Search Tracker / Recoll file search index configure Thunderbird to have an additional IMAP account ('remember password') add some new bookmarks in Firefox/Chrome change the desktop background image install new software with apt-get install build and install new software with checkinstall etc. I do some 'sync' operation I switch to my Desktop PC and get all the changes from (1) working on the Desktop PC I work on my Desktop PC and do some changes to software configuration, for example: add new directory to the list of directories to be backed up by DejaDup add a new check spelling dictionary to the Libreoffice Writer configure the Terminator software to have colored fonts install new font into the Ubuntu system configure Ekiga to make phone calls etc. I do some 'sync' operation I switch to my Laptop PC and get all the changes from (1) and (4) working on the Laptop PC. Question: What free/open-source software can I use to sync both machines' Ubuntu systems, installed software and configurations? Is it possible to do that without any cloud services? Complementary question: It is obvious that the Desktop PC and the Laptop PC have different hardware configurations. How does the 'sync software' in question deal with video drivers, wlan drivers and their configurations? Note: I do not need all the PCs to be synced at the same time, because I work with only one single machine at once. Note: I considered to use Chef to solve the problem, but it seems that it might be really cumbersome to maintain such a setup. Note: I also considered using a bootable USB with Ubuntu installed (portable Linux), but I am not sure that the video drivers will work then.

  Read the article

• Wifi not working on Acer Aspire One D270

  - by Dani

  brand new baby linux user here, never used Ubuntu or any other linux OS before, so be gentle and use short words! I installed Ubuntu 12.04 on my new Acer Aspire One D270-F61C/KF netbook (it's a Japanese computer which had Japanese windows preinstalled, and I decided to take the plunge and try Ubuntu because English Windows costs the earth and stars). Wifi isn't working; I enter my wireless password, it tries to connect for a while, then asks for my password again. And KEEPS ASKING, every few minutes. Wired connection works fine. Wireless card is a Broadcom BCM4313; I have the "additional drivers" checked and installed (I tried unchecking and then reinstalling them in case that would help, no joy, and now my home wifi connection isn't showing up in the list of available connections, argh). I've done a lot of googling and I gather there's a lot of issues with Broadcom cards, but some of the answers are for earlier ubuntu builds and many of them are a bit confusing for a new user. I gather I need to try installing some new drivers other than the proprietary ones provided, but I'm having trouble figuring out how that's done. Anyone got some simple, step by step instructions for me? Please bear in mind, TOTAL N00B. (EDIT): OKAY, got it fixed finally; after suggestions on the Ubuntu forums and messing around with drivers, what finally worked was installing Wicd. Not... using Wicd, for some reason, just installing it fixed it. ...I CHOOSE NOT TO QUESTION IT.

  Read the article

• How to get Unity working on dual gpu laptop?

  - by Mourgos

  I recently bought a new laptop (Asus X53S series) that has two GPUs, an NVidia GeForce GT 540M and an integrated Intel GPU (I believe it's called Intel HD graphics 3000). I installed the recommended restricted NVidia drivers after a clean Ubuntu 11.10 install. In the 'additional drivers' program I get the message: "This driver is enabled and in use", although when I try to open the NVidia X Server Settings it says "You do not appear to be using the NVIDIA X driver." which seems to be the case since Ubuntu only starts using Unity 2D. I've had the same issue in 11.04 and I was forced to use the nouveau driver just to get unity working, but since I get quite a few crashes with it I really want to get the propriety driver working this time around. Since I've never had this issue with older laptops, I can only assume it is caused due to the dual gpu configuration. How do I get Ubuntu to use the propriety drivers, or is there any workaround to get the integrated Intel GPU to be ignored by Ubuntu? Alternatively, has anyone got Unity working with a similar setup?

  Read the article

• Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, lengthy login/logout delays

  - by NahsiN

  Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

  Read the article

• Ubuntu 12.10: Installing proprietary Nvidia driver causes freeze at boot

  - by Greg

  Ok, so I just installed Ubuntu on my laptop, and I immediately encountered an issue: the HDMI audio output won't work. Yes, I know about the sound settings thing where you have to select the HDMI option, but even when it's selected I get no sound out of the TV I'm hooking it up to. This is a dealbreaker for me, because my laptop speakers are terrible, it's one of the big reasons I use my TV monitor. So I decided to work on solving the problem by upgrading my Nvidia drivers. I switched to one of the propriety drivers offered in that software updating utility that comes with the OS, the one option that said (tested). Viola, sound over the HDMI is now working. Unfortunately, this now brings me to my next problem: when I reboot Ubuntu with this or any other proprietary driver installed, it freezes when it tries to load my desktop. As in I can see my wallpaper, but no icons or options of any kind. The system is totally frozen, and gives me one of those "we've experienced an error, do you want to report it messages." So there's my bind. I need HDMI audio out, that's a total dealbreaker for me, but installing the drivers that give me that capability crash the system. Does anyone have any idea what's causing this

  Read the article

• NVIDIA Graphics - resolution problems with new 12.04 LTS installation

  - by Daveisuser56810

  I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Wireless doesn't work after installing 11.10

  - by Ingram

  I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >