Search Results

Search found 4376 results on 176 pages for 'drivers'.

Page 57/176 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Sync profile/data/software for multiple computers?

  - by ultimatebuster

  Is it possible to sync all the user settings (interface settings, program settings), as well as programs for multiple computers? Data is not as important, though the settings (which is technically data, but not that kind of data, like music, files...) and applications are. Also, it will not sync the drivers. (Example: 1 computer uses bumblebee and the other uses ATI catalyst, and maybe there's different network drivers.. etc.)

  Read the article

• How to Boot from iRAM Solid State Drive on Ubuntu

  - by quickshiftin

  I've got an iRAM solid state drive. I'd like to use this to store a linux root filesystem; the trouble is the device is not recognized as a hard drive to the BIOS. It only shows up if a live CD environment is loaded and the scsi drivers are available (may be other drivers needed as well). I've heard of Boot to Ram and wonder if some variation of that could work here and I could run a linux install off the iRAM??

  Read the article

• Dual nVidia GPUs (3 monitors) not working in 11.10

  - by jasonmclose

  after searching I have not found a solution. I have 2 nvidia quadro 295 cards with 3 monitors but I can not extend twinview across multiple GPUs. I have the most recent nvidia proprietary drivers installed, and they work fine for the single GPU / dual monitors. I tried using xinerama, but without success. I don't mind switching to the nouveau drivers if that would handle my multiple monitors, although I would like to continue to use unity and compiz if i can).

  Read the article

• Which Kinect package for PC takes care of motion tracking too?

  - by Extrakun

  I am aware that there are opensource drivers for interfacing Kinect with the PC. My question is - the drivers at OpenKinect seems to provide only the images and depth data (from the reading of their wiki and API). It seems that you need to provide your own imaging solution. My question is - is there any all-in-one package, with samples/sources that not only grab images from Kinect, but also do the imaging/motion detection for you?

  Read the article

• No firmware found for b43 wireless controlloer (BCM4318) on a Dell Latitude D610

  - by Stanton.Sculpture

  Trying to get my 03:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) working. I just reformated and installed 12.04 on this old Windows XP machine, and I don't know where to get the firmware for this. This is what I got when I typed sudo lshw -c network: http://pastebin.ubuntu.com/1041161/ Also, when I go to additional drivers in the system settings, no proprietary drivers show up. Any help I can get on this would be Great, Thanks!

  Read the article

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

• Making the iPhone work with stripped down Windows XP

  - by Gabriel

  Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

  Read the article

• No headphone or speakers plugged in - Windows 7 issue

  - by Amit Ranjan

  I am facing a wierd issue between my sound card driver and Windows7(any edition). I have a sony vaio notebook (VPCEB24EN). Two days ago, on start I got diabled wifi, charging and speakers. Then I restart the PC and everthing worked fine. Later on I again restarted my machine, and then I found the my speakers were not working. I thought, restart will work. I restarted many more times but it did'nt work. I searched google and found that , it might be due to : 1. Hardware is not switched on from bios. 2. No hardware. 3. overriding 64-bit drivers with 32-bit drivers. To make it working, I restored my laptop from scratched, but while restoring pc, the realtek HD drivers, it gave me an error 505. I then formatted the drive and installed Win7 Ultimate 32bit (With PC was, Win7 64-bit Home Basic). I got lots of yellow exclamation in device manager, thinking now this will resolve my issue. But Even after the installing all drivers on a fresh installation, I was still with the same position. A red cross on speaker- No Speakers or Headphone plugged in. Please Note: My Laptop is Vaio , E Series, VPCEB24EN. Audio : Intel® High Definition Audio compatible but accepts Realted Audio. While using BIOS Agent, I got Intel Chipset 5 Series Audio Adapter and ATI RV370 Audio adapter found on my board. Installed is Win7 32bit Ultimate. factory default was Win7 64-bit Home Basic Memory: RAM 3GB/ 320GB HDD Display : ATI Mobility Radeon™ HD 5145 Graphics

  Read the article

• How does USB device recognition work?

  - by GorillaSandwich

  I'm curious how USB device recognition works in Windows. I imagine it's something like this: When you plug in a device, it tells Windows "here's my device ID to tell you what I am" Windows looks to see if any drivers have been installed that match that device ID. The driver probably tells Windows what the device should be called - like "BlackBerry Curve" or "Canon Printer" If so, it somehow associates that device with that driver Otherwise, it looks for a matching driver online (if you let it) Am I right? If so, that still leaves some questions. When you install drivers, where do they go? Are they files in a folder, or do they get added to the registry? What is Windows doing when it first recognizes the device, thinks, and finally says "your new device is installed and ready to use?" Where does Windows look for missing drivers? Is it in their own database? Do device manufacturers submit drivers to Microsoft for inclusion there? Can anybody explain how this process really works? Also, do other OSes do this differently?

  Read the article

• ATI Radeon 5670 Won't Show Resolutions over 1400x900

  - by Phil Sandler

  Just got my new Dell computer with Windows 7 and an ATI Radeon 5670. I attached it to my current monitor, which is a Samsung 24" (2443bwt). Windows 7 does not allow me to display in resolutions greater than 1400 x 900. The setup through a VGA cable into the VGA port of the card. The card also has a DVI port, but I need to use the VGA port because a KVM that supports VGA only. My old PC (which is Windows XP, GeForce 8600 video) can display in 1900 x 1200 on the same monitor (which is what I want) and even higher. It does this through a vga cable also connected to the KVM (through the DVI port but using an adapter). I have tried the same setup (DVI = VGA adapter) on the new PC and nothing changed. I have tried: Updating the drivers via Windows "Update Driver" (says they are current) Installing the updated version of the drivers from ATI (made no difference) Installing Powerstrip (all the options I would need for a custom resolution are greyed out) Installing the drivers/software from ATI caused the ATI Catalyst Control Center software to stop functioning, so I can no longer even start it. I have found some references to other people having this problem and instructions on cleaning the software off and reinstalling it (as uninstalling normally doesn't solve it). I will try this tonight. In any case, I didn't see any options in CCC that would allow me to override the settings for max resolution. However I didn't tinker with it too much before I tried updating the drivers, so I may have missed a setting. I contacted Samsung via online chat and they say it's a problem with the video card/driver (of course--what else would they say?). Any thoughts on what else I could try?

  Read the article

• Windows 7 Taskbar Icons Randomly Disappearing

  - by Ryker

  This is a problem that i'm totally stumped on. Taskbar Icons that are pinned, as well as open program thumbs keep disappearing. This is totally random, no set pattern. I've tried updating drivers for the vid card, rolling back to old drivers, nothing seems to work. I've also tried the usual uncheck hide the taskbar and recheck, changing the start menu, keeping commonly used programs in start menu, etc. This is using an add-in card which is a necessity. Here is the specs on the machine: New Dell Optiplex 390 i3 2100 Proc 3gb Ram, Windows 7 32-bit. The add in card is an Nvidia 8400 GS model. I've tried different versions of the 8400gs, from MSI, or from other manufactureres and regardless it keeps happening. After the Icons disappear, I can log out and log back in and they return, but disappear again. I can reinstall the drivers for the vid card and it fixes it for a few days, and then they disappear again. There isn't any set pattern of days that it happens, software being used, etc. Another user in the office had the same problem with the exact same machine, but updating the vid card drivers fixed the issue. Anyone?

  Read the article

• How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

  - by Favourite Chigozie Onwuemene

  Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

  Read the article

• How to Force Graphics Options in PC Games with NVIDIA, AMD, or Intel Graphics

  - by Chris Hoffman

  PC games usually have built-in graphics options you can change. But you’re not limited to the options built into games — the graphics control panels bundled with graphics drivers allow you to tweak options from outside PC games. For example, these tools allow you to force-enabling antialiasing to make old games look better, even if they don’t normally support it. You can also reduce graphics quality to get more performance on slow hardware. If You Don’t See These Options If you don’t have the NVIDIA Control Panel, AMD Catalyst Control Center, or Intel Graphics and Media Control Panel installed, you may need to install the appropriate graphics driver package for your hardware from the hardware manufacturer’s website. The drivers provided via Windows Update don’t include additional software like the NVIDIA Control Panel or AMD Catalyst Control Center. Drivers provided via Windows Update are also more out of date. If you’re playing PC games, you’ll want to have the latest graphics drivers installed on your system. NVIDIA Control Panel The NVIDIA Control Panel allows you to change these options if your computer has NVIDIA graphics hardware. To launch it, right-click your desktop background and select NVIDIA Control Panel. You can also find this tool by performing a Start menu (or Start screen) search for NVIDIA Control Panel or by right-clicking the NVIDIA icon in your system tray and selecting Open NVIDIA Control Panel. To quickly set a system-wide preference, you could use the Adjust image settings with preview option. For example, if you have old hardware that struggles to play the games you want to play, you may want to select “Use my preference emphasizing” and move the slider all the way to “Performance.” This trades graphics quality for an increased frame rate. By default, the “Use the advanced 3D image settings” option is selected. You can select Manage 3D settings and change advanced settings for all programs on your computer or just for specific games. NVIDIA keeps a database of the optimal settings for various games, but you’re free to tweak individual settings here. Just mouse-over an option for an explanation of what it does. If you have a laptop with NVIDIA Optimus technology — that is, both NVIDIA and Intel graphics — this is the same place you can choose which applications will use the NVIDIA hardware and which will use the Intel hardware. AMD Catalyst Control Center AMD’s Catalyst Control Center allows you to change these options on AMD graphics hardware. To open it, right-click your desktop background and select Catalyst Control Center. You can also right-click the Catalyst icon in your system tray and select Catalyst Control Center or perform a Start menu (or Start screen) search for Catalyst Control Center. Click the Gaming category at the left side of the Catalyst Control Center window and select 3D Application Settings to access the graphics settings you can change. The System Settings tab allows you to configure these options globally, for all games. Mouse over any option to see an explanation of what it does. You can also set per-application 3D settings and tweak your settings on a per-game basis. Click the Add option and browse to a game’s .exe file to change its options. Intel Graphics and Media Control Panel Intel integrated graphics is nowhere near as powerful as dedicated graphics hardware from NVIDIA and AMD, but it’s improving and comes included with most computers. Intel doesn’t provide anywhere near as many options in its graphics control panel, but you can still tweak some common settings. To open the Intel graphics control panel, locate the Intel graphics icon in your system tray, right-click it, and select Graphics Properties. You can also right-click the desktop and select Graphics Properties. Select either Basic Mode or Advanced Mode. When the Intel Graphics and Media Control Panel appears, select the 3D option. You’ll be able to set your Performance or Quality setting by moving the slider around or click the Custom Settings check box and customize your Anisotropic Filtering and Vertical Sync preference. Different Intel graphics hardware may have different options here. We also wouldn’t be surprised to see more advanced options appear in the future if Intel is serious about competing in the PC graphics market, as they say they are. These options are primarily useful to PC gamers, so don’t worry about them — or bother downloading updated graphics drivers — if you’re not a PC gamer and don’t use any intensive 3D applications on your computer. Image Credit: Dave Dugdale on Flickr     

  Read the article

• How to install iodbc in Ubuntu 12.10

  - by Hanynowsky

  I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• My computer freezes irregularly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• Install server 2012 on HP ML110 G7 with B110i controller, no disks found

  - by Molotch

  I'm trying to install Server 2012 on a HP ML110 G7 with a B110i controller and four non hot-swappable SATA drives. I just can't get the Server 2012 boot disk PE environment to find any disks. I have downloaded the latest SPP (Service Pack for Proliant 2012.10) and flashed the BIOS. I have tried two different HP drivers for B110i and Windows X64, 6.18.0.64 and 6.18.2.64 to no avail. I have tried setting the controller to both AHCI and legacy mode in the BIOS, no difference. HP:s SmartStart disc for G7 servers only support installation of up to Windows Server 2008R2. HP:s installation instructions for Server 2012 Essentials says boot from the windows disk and use the storage drivers found on the SPP (I can't find any storage drivers on the SPP disk).

  Read the article

• Rotate monitor to portrait on Windows Server 2003 with ATI card

  - by Eli

  Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

  Read the article

• Problem using Polar Irda device in Windows Server 2008

  - by AngrySpade

  I'm attempting to use the Polar IrDA device with Windows Server 2008 R2 x64. Although they dont make explicit drivers for it, I figured the Windows 7 x64 drivers would do. http://www.polar.fi/en/support/downloads?product=&category=Software&documenttitle=Polar+IrDA+USB+Adapter+drivers&document=/gip/PKBStoGIP.nsf/web_cat/C225742500419A8AC2257458003D3F40 The device has a yellow warning icon in Device Manager. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Is there anything I can do about this?

  Read the article

• Windows 7 / ATI CCC - Monitor limit?

  - by james.ingham

  Hi all, I have a Ati 4850 X2 and back in the days when Windows 7 was in beta, I had this running with 4 monitors (Crossfire off). Now I have come to set this up again, with a RTM version of Windows 7 and the latest ATI drivers and it seems I can only have two monitors on at one time. If I try and set the monitors up in Control Panel, it simply disables the non-primary monitor, and if I attempt to do it in CCC, I get the message "To extend the desktop, a desktop or display must be disabled." Does anyone know why this is and/or how to fix it? I've currently tried using the latest ATI drivers and the drivers (i think) I was using over a year ago when I had this setup. Thanks - James

  Read the article

• ubuntu 9.10 screen flickering problem on Thinkpad R31 with Intel 83830 Graphics

  - by PA

  I am trying to revitalize an old Thinkpad R31 that has the Intel 82830 graphics and only 256 MB of RAM. I have tried a Xubuntu 9.10 Live CD. After booting the screen blinks so much that it is practically unreadable. I have searched for updated IBM Thinkpad drivers but I only found drivers for Windows on the Thinkpad support web site. EDIT: I have changed the title and the description. It is not a problem of the drivers. It seems to be a problem with the kernel. See my own answer below.

  Read the article

• OS X Snow Leopard stops processing clicks from Wacom Intuous2

  - by antiver

  I'm using a Wacom Intuos2 graphics tablet in OS X Snow Leopard 10.6.2, which works great, 80% of the time. Every 20 minutes or so, OS X to just start ignoring input from the pen. More specifically, only the pen tip is ignored - the side buttons on the pen still work. Putting the Mac to sleep and waking it back up restores functionality to the pen tip. This is using both of the latest Wacom drivers claiming compatibility with Snow Leopard: versions 6.1.2-5 (Nov 25, 2009) and 6.1.3-3 (Jan 21, 2010). I have no experience with this tablet with other version of OS X / drivers. The tablet works 100% in Windows, which leads to blame either OS X or the OS X drivers.

  Read the article

• Netbook with Windows 7 Starter - Can I upgrade to Professional or Ultimate?

  - by Andrew J. Brehm

  There are finally Windows 7 netbooks available, but they come with Windows 7 "Starter". Can I upgrade "Starter" to Windows 7 Ultimate using a normal retail DVD (and its new licence key)? What about special netbook drivers? Will they be replaced by an in-place upgrade? Does Windows 7 even have a way to upgrade to another edition or will I have to delete and re-install? If I delete and re-install, how will I get the special netbook drivers to install again? In my case it will probably be a HP netbook (HP Mini 110-1115SA). Can I just install the drivers from the HP CD that comes with the computer? Any ideas?

  Read the article

• RAID driver to choose for slipstreaming XP installation on ASUS P5S800

  - by alex

  I'm trying to install Windows XP on my new SATA drive but I need to first slipstream the drivers with nLite. I've done this before, but not on an ASUS P5S800 - VM motherboard. I'm not used to the number of choices it gives me for drivers in SiS chipsets. When I look through the folder that I downloaded from ASUS for the RAID driver, I see many folders with different versions of the driver. Here are the folders or versions given. 180ob 964_180 965 966_968 What drivers do I need to add in order to get XP on my SATA disk?

  Read the article

• Can't find onboard NIC with windows server 2008

  - by Sanarothe

  Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >