Search Results

Search found 4137 results on 166 pages for 'hda intel'.

Page 55/166 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Standby Problem, PC can not enter Standby mode

  - by Leon95

  I have a problem with the Standby function: My Computer does not enter the Standby mode with Ubuntu 14.04LTS. If I remeber me right it, works with Ubuntu 13.10 but this Version was not long installed on this PC. Now when i press Standby in the menu or on my Keyboard the Display turns black for a few seconds, then some messages appear for a very short moment on the screen. After that, the the log-in screen appear. Two times I was able to enter Standby but the other times it fails. Tecnical Data about my PC: Ubuntu 14.04 with all Updates main storage: 3,8GiBprocessor: Intel® Core™ i3-2330M CPU @ 2.20GHz × 4 graphic: Intel® Sandybridge Mobile graphic board: NVIDA GEFORCE GT 555M CUDA 1GB Dual Boot System with win7 x64Bit Medion P6812 Laptop Here is the message output: Usally I got only a half of the screen filled with messages like that. When I filmed it it was much more. I dont know, maybe this is a Bug.

  Read the article

• Monitor blinking

  - by Shark

  Hi I have Ubuntu 10.04, my laptop is ASUS k50ij, intel duo t3000, 2gb ram, 320 HDD, intel gma 4500M video card. My problem is that a couple days ago my monitor had start blinking for a few seconds. Then it stops and begins the same behaviour let's say in next 2 hours. What am i missing here? Another funny problem is that when i give more or less brightness to monitor the pop up window shows and giving "Power information: Laptop battery is charged". When my brightness is lower the blinking increases and vice versa. thx for help

  Read the article

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• Cluster failover and strange gratuitous arp behavior

  - by lazerpld

  I am experiencing a strange Windows 2008R2 cluster related issue that is bothering me. I feel that I have come close as to what the issue is, but still don't fully understand what is happening. I have a two node exchange 2007 cluster running on two 2008R2 servers. The exchange cluster application works fine when running on the "primary" cluster node. The problem occurs when failing over the cluster ressource to the secondary node. When failing over the cluster to the "secondary" node, which for instance is on the same subnet as the "primary", the failover initially works ok and the cluster ressource continues to work for a couple of minutes on the new node. Which means that the recieving node does send out a gratuitous arp reply packet that updated the arp tables on the network. But after x amount of time (typically within 5 minutes time) something updates the arp-tables again because all of a sudden the cluster service does not answer to pings. So basically I start a ping to the exchange cluster address when its running on the "primary node". It works just great. I failover the cluster ressource group to the "secondary node" and I only have loss of one ping which is acceptable. The cluster ressource still answers for some time after being failed over and all of a sudden the ping starts timing out. This is telling me that the arp table initially is updated by the secondary node, but then something (which I haven't found out yet) wrongfully updates it again, probably with the primary node's MAC. Why does this happen - has anyone experienced the same problem? The cluster is NOT running NLB and the problem stops immidiately after failing over back to the primary node where there are no problems. Each node is using NIC teaming (intel) with ALB. Each node is on the same subnet and has gateway and so on entered correctly as far as I am concerned. Edit: I was wondering if it could be related to network binding order maybe? Because I have noticed that the only difference I can see from node to node is when showing the local arp table. On the "primary" node the arp table is generated on the cluster address as the source. While on the "secondary" its generated from the nodes own network card. Any input on this? Edit: Ok here is the connection layout. Cluster address: A.B.6.208/25 Exchange application address: A.B.6.212/25 Node A: 3 physical nics. Two teamed using intels teaming with the address A.B.6.210/25 called public The last one used for cluster traffic called private with 10.0.0.138/24 Node B: 3 physical nics. Two teamed using intels teaming with the address A.B.6.211/25 called public The last one used for cluster traffic called private with 10.0.0.139/24 Each node sits in a seperate datacenter connected together. End switches being cisco in DC1 and NEXUS 5000/2000 in DC2. Edit: I have been testing a little more. I have now created an empty application on the same cluster, and given it another ip address on the same subnet as the exchange application. After failing this empty application over, I see the exact same problem occuring. After one or two minutes clients on other subnets cannot ping the virtual ip of the application. But while clients on other subnets cannot, another server from another cluster on the same subnet has no trouble pinging. But if i then make another failover to the original state, then the situation is the opposite. So now clients on same subnet cannot, and on other they can. We have another cluster set up the same way and on the same subnet, with the same intel network cards, the same drivers and same teaming settings. Here we are not seeing this. So its somewhat confusing. Edit: OK done some more research. Removed the NIC teaming of the secondary node, since it didnt work anyway. After some standard problems following that, I finally managed to get it up and running again with the old NIC teaming settings on one single physical network card. Now I am not able to reproduce the problem described above. So it is somehow related to the teaming - maybe some kind of bug? Edit: Did some more failing over without being able to make it fail. So removing the NIC team looks like it was a workaround. Now I tried to reestablish the intel NIC teaming with ALB (as it was before) and i still cannot make it fail. This is annoying due to the fact that now i actually cannot pinpoint the root of the problem. Now it just seems to be some kind of MS/intel hick-up - which is hard to accept because what if the problem reoccurs in 14 days? There is a strange thing that happened though. After recreating the NIC team I was not able to rename the team to "PUBLIC" which the old team was called. So something has not been cleaned up in windows - although the server HAS been restarted! Edit: OK after restablishing the ALB teaming the error came back. So I am now going to do some thorough testing and i will get back with my observations. One thing is for sure. It is related to Intel 82575EB NICS, ALB and Gratuitous Arp.

  Read the article

• Screen Brightness not adjustable for Acer Aspire S3

  - by Kakadu90

  First of all, thank you very much for providing this useful forum. Too bad for me, there is no support for the Acer Aspire S3 yet (just came out in October) Short Description of the Problem: I cannot adjust the screen brightness. Neither Compiz nor the FN Key combination work. Also the fan keeps running on full power. As you can guess, both of these drain my battery. The Setup: Acer Aspire S3, Intel i5 newest Generation, Intel HD3000 Grafic Accelerator (no driver maybe?) Thanks in advance, Kakadu90

  Read the article

• Can't connect to WIFI after sleep Ubuntu 14.04

  - by user3380404

  After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

  Read the article

• Bluetooth not really "turning on" on a Sony Vaio VPCEG

  - by marcioAlmada

  On a Sony Vaio VPCEG, bluetooth is not working properly: The gnome-shell bluetooth indicator (at the main bar) shows the bluetooth is on, but when I try to switch visibility on it simply doesn't turn on. When I open the bluetooth configuration dialog, the on/off indicator shows me the bluetooth is off. And when I try to turn it on it simply does not turn on. The following is outputted by lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0c45:64be Microdia Bus 001 Device 004: ID 0489:e027 Foxconn / Hon Hai Bus 002 Device 014: ID 4971:ce22 SimpleTech ====== Update: Output from rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no What should I do to really activate the bluetooth?

  Read the article

• Why do webpages take longer to loo in ubuntu 12.04 than Windows 7

  - by Emil Abraham

  For example, when I click on a Facebook picture, the picture remains pixelated for about 30 seconds, then starts to clear up. Or when I watch YouTube videos, I can't watch them on HD without running into buffer issues. Windows 7 is just much snappier. It might be an issue with the graphics card. Dualbooting Windows 7 64bit & Ubuntu 12.04 64 bit Specs: CPU: Intel® Core™ i7-2630QM CPU @ 2.00GHz × 8 RAM: 8GB DDR3 HDD: 50 GB to Ubuntu & Remaining 1.5 TB to Windows The interesting part: Graphics Card: On System Settings in Ubuntu: Intel® Sandybridge Mobile Graphics Card: What it should be: Radeon™ HD 7690M XT switchable graphics with 1024MB GDDR5 and up to 5093MB total graphics memory

  Read the article

• Ubuntu 10.04 LTS consomme plus d'énergie que Windows 7, la distribution Linux est-elle trop gourmand

  Ubuntu 10.04 LTS consomme plus d'énergie que Windows 7, la distribution Linux est-elle trop gourmande ? Ubuntu 10.04 LTS est une distribution Linux mobile, optimisée pour les ordinateurs portables et les netbooks. C'est du moins ainsi qu'elle est présentée. Mais les tests réalisés par des journalistes américains démontrent plutôt le contaire. La consommation électrique de deux ordinateurs portables fonctionnant sous Windows 7 et l'Ubuntu 10.04 LTS a été mesurée et comparée. Il s'agissait d'un Asus Eee PC 1201N (Intel Atom 330 et solution graphique NVIDIA GeForce 9400M) et d'un Lenovo ThinkPad T61 (Intel Core 2 Duo T9300 et une carte graphique NVIDIA Quadro NVS 140M). Les tests ont été effectués avec le pilote graphique d'origine et...

  Read the article

• Save Windows 8 Files and Install Ubuntu

  - by Nika

  I would like to install Ubuntu on my laptop. I am new to Ubuntu and therefore have some questions: 1.My hardware is Acer Emachines Intel Celeron T3000 1.8 3 Gig of Ram and Native Intel Intergrated graphics card. Can I run Ubuntu on this machine without any problems? 2.I am windows user and currently have windows 8. I want to install ubuntu but want to save all my directories on C:\ D:\ disks so that I can open my files in ubuntu. Is it possible to save my current directory system and save all my files after installing ubuntu? Can I open all my files? I have very important data in files so I dont want to lose them at all :) Thank You

  Read the article

• Flash player (in Firefox) is unstable in 14.04

  - by henry

  For 13.10, I used this guide to get Intel iGPU-supported playback of flash videos in Firefox: http://www.webupd8.org/2013/09/adobe-flash-player-hardware.html All in all, Intel graphics acceleration for flash content was working just fine in 13.10, at least on my machine (with Xubuntu). I basically followed the guide to do the same for 14.04, but about 2-3 weeks ago flash videos started acting up. Whenever I have one instance of flash paused or stopped in one tab and go to the next tab to continue some song on Soundcloud or something, it's game over. I'm clueless as to what I can do here. Did anything change in the meantime?

  Read the article

• Which version of ubuntu is compatible with ACER Aspire 5732Z?

  - by Mehdi Bateni

  I have an ACER Aspire 5732Z Laptop, and 6 days ago I have installed Ubuntu 11.10 on my laptop, But I found black screen in login. I have tried a lot of ways to solve this problem, but there is no way. So can you tell me which version is compatible with this ACER Aspire (5732Z)? Detail: Intel-Pentium-processor T4400 (2.2 GHz, 800 MHz FSB), Intel-GMA 4500M, 15.6" HD LCD, 2GB Memory, 320 GB HDD, Acer Nplify(TM) 802.11b/g/n. Thank You. .. And finally, I found that Linux Mint is best for my ACER-ASPIRE5732Z. It is also compatible with Ubuntu codes, because as I know it is base on Ubuntu.

  Read the article

• Thinkpad brightness steps error using FN+Home/End

  - by petermolnar

  I've met the following problem: normally my T400 (Lenovo Thinkpad) has 16 steps of brightness, and Windows utilizes it correctly. After a fresh install & minor tweaks Mint 12 (which is based on 11.10 Ubuntu) I only had 6 steps which was way to few. Listing /sys/class/backlight showed 3 entried. I removed the acpi-tools package, one of the disapperared - and I now have 10 steps! Therefore I think if I can reduce the entries to 1 I'm going to have 16 steps, since the stepping will be 1 instead of 2 (or 3). /sys/class/backlight/ intel_backlight -> ../../devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight thinkpad_screen -> ../../devices/virtual/backlight/thinkpad_screen The problem is that I'm unable to trace back what are the configs / daemons / kernel options triggers these two. More strangely, I discovered a strange behaviour. I monitored watch -n1 "cat /sys/class/backlight/thinkpad_screen/actual_brightness" and watch -n1 "cat /sys/class/backlight/intel_backlight/actual_brightness" while changing the brightness with FN+home/end combinations from max to min. The outcome is the following: brighness intel thinkpad --------- ----- -------- MAX 2408475 7 | 1955115 5 | 1435640 3 | 1246740 1 | 1086175 0 | 1010615 6 | 859495 4 | 689485 2 v 481695 0 MIN 217235 0 brighness intel thinkpad --------- ----- -------- MIN 217235 0 | 481695 2 | 689485 4 | 859495 6 | 1010615 7 | 1086175 1 | 1246740 3 | 1435640 5 v 1955115 7 MAX 2408475 0 When stepping from MIN to MAX, there's no difference between the last 2 steps. Also, the OSD icon (Cinnamon desktop, default theme) goes from full to min in 4 steps and from full to min once again in 4 steps. So... it seems that the intel entry is working correctly, showing correct values. The thinkpad entry however twists the things and even showing incorrect values. Does anyone have any idea how to get rid of the thinkpad entry? System data: Linux Mint 12 3.0.0-16 kernel Lenovo ThinkPad T400 Cinnamon 1.4 desktop For any additional info, please tell me what do you need. EDIT I'm sorry, I forgot to mention, I added acpi_backlight=vendor to GRUB cmdline as well, this is the result of the semi-better working than the default.

  Read the article

• Periodic clicking sound from PC speaker

  - by John J. Camilleri

  After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• How to review the current state of open source vs. closed source graphics drivers?

  - by Bucic

  How to know whether it's worth it to replace open source drivers installed by default with proprietary ones. Are there any benchmarks? Major known issues summaries. I don't mean 'at the time of writing this post'. I mean an up-to-date status on how the drivers compare. This page https://help.ubuntu.com/community/BinaryDriverHowto/ certainly doesn't do much on the matter, nor it even mentions Intel. EDIT: I've just learned there is no Intel proprietary driver because they made their drivers open source http://askubuntu.com/a/17395/29347

  Read the article

• Keep getting messages about internal system errors

  - by Tomas Lycken

  I keep getting popups about internal system errors (see screenshot below) on irregular intervals (several times a day), that I don't know what to do about. If I continue through the dialog and try to report the error back to the Ubuntu project, I get a message stating that development on this version of Ubuntu has been completed, and that I should ask for help here if I don't know what to do about it. I don't. If I show the details of the error message, the "executable path" parameter shows /usr/share/apport/apport-gpu-error-intel.py. Is this a bug I should report to Launchpad, or just a configuration error somewhere? If it's a bug, how do I collect the data I (and the devs) need? Update in response to comment: I am running an ASUS N53SN, sporting an Intel Core i7 2630QM CPU and an NVidia GeForce 550M GPU.

  Read the article

• No me arranca ubuntu 12.04

  - by MAgnum

  Buenos Dias, Tengo un Notebook Intel(R) Atom(TM) CPU N270 1.60GHz Version de la BIOS Intel V1585, tenia un sistema operativo de windows xp e intente instalar ubunto 12.04 por medio de live USB debido a que no tengo la adaptación de CD segui todos los pasos y le di instalar completamente formateando el sistema anterior, terminando la instalacion me salio un problema que no encontraba el sistema de arranque o algo asi el hecho es que me salia algo de SDA donde aparecia el modelo del HDD y como es Hitachi HTS543212L9A300 le di en esa y le di finalizar, pero al reiniciar cuando debe iniciar el sistema operativo se queda en negro y no carga nada =S he intentado volver a arrancar la usb pero no me deja hacer nada se me traba =S. soy principiante en este sistema operativo y quiera saber que solución me pueden decir para sacarme de este embrollo. tampoco me sale nada despues de usar ctrl+alt+F1 =S... Muchas gracias al alma caritativa que me quiera asesorar =D...

  Read the article

• Configure audio on HP ENVY 4 ultrabook

  - by phodu_insaan

  I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- Thanks

  Read the article

• Desktop interface crashes after software updates

  - by N.C. Weber

  Recently, after installing Ubuntu software updates on the evening of December 7th, 2012, my desktop interface crashes regularly leaving me with a command line screen with a long string of automated commands showing (I assume what goes on behind the pretty desktop). At first, I thought it was only crashing whenever I played DirectX games in WINE, but now it crashes if I open the native Firefox browser or if it's doing nothing at all but sitting there. Apport attempts to report the bugs after restart, but often they crash as well. I've done a SMART check on the hard drive, and everything report OK. No read errors, no bad sectors. I am using an Acer Extensa 4620Z Memory: 2.0 GiB Processor: Intel Pentium Dual CPU T2370 @ 1.73GHz x 2 GraphicsL: Intel 965GM x86/MMX/SSE2 OS: Ubuntu 12.10 32-bit Disk: 116.0 GB with 33.4 GB Available

  Read the article

• packhard bell dot s netbook ubuntu 12.10

  - by Kermit

  sorry im absolutly linux beginner.... i bought a packhard bell netbook dots with Limpus.did not get along with limpus so wanted to install ubuntu. netbook: 2 GB RAM intel Atom N2600, intel graphics Media Accelerator 3600 I over installled ubuntu 12.10 (desktop version) like in the instruction (isofile over USB). Installation went fine. No problems. when starting after installation alot of text is coming.....starting xyz....with alot of okays at the end of line but nothing happends: ends with #Starting CPU interrups balancing daemon, stopping anachronics cron and blinking cursor... was reading in this forum, tried to do some things like #recoverymode# and nomodeset... but did not work or where do i get this graphic drivers from. Packard bell just offers windows drivers.and how do i install them? maybe its a completely diffrent cause for this? Thanks alot

  Read the article

• SSD-HDD price parity

  - by jchang

  It is hard to believe that we are essentially at SSD-HDD price parity? Of course I am comparing enterprise class 10K/15K HDDs to consumer grade SSDs. Below are prices I am seeing 300GB 15K HDD $370 900GB 10K HDD $600 1TB 7200 HDD $230 (less for consumer HDDs) 512GB SATA SSD $400-600 Intel SSD DC S3700 400GB $940 The 512GB SATA SSDs are consumer grade, MLC NAND, with only 7% over provisioning. That is 512GB (1GB = 2^30) of NAND, with 512GB (1GB =10^9) of user capacity. Intel just announced the SSD...(read more)

  Read the article

• Can't activate "mirror display"

  - by Nemo Peeters

  I have Ubuntu 12.04 on a Dell latitude E6410, I have a problem when using the VGA output I always have dual monitor and can't switch on the "mirror display" toggle under systems setting/displays. It's rather annoying when having to do presentation with a video projector. the option "mirror display" is in light grey and I can"t tick the box. Thanks for those who might have an idea how to resolve this? update: driver is: Intel® Ironlake Mobile x86/MMX/SSE2 card something like this ? description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 64 bits clock: 33MHz

  Read the article

• Is there any difference between processor and core?

  - by Salvador

  The following two command seems to give me different information about the same hardware srs@ubuntu:~$ cat /proc/cpuinfo | grep -e processor -e cores processor : 0 cpu cores : 4 processor : 1 cpu cores : 4 processor : 2 cpu cores : 4 processor : 3 cpu cores : 4 srs@ubuntu:~$ sudo dmidecode -t processor # dmidecode 2.9 SMBIOS 2.6 present. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: LGA1155 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: Intel ID: A7 06 02 00 FF FB EB BF Version: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz Voltage: 1.0 V External Clock: 100 MHz Max Speed: 3800 MHz Current Speed: 3300 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 4 Core Enabled: 1 Characteristics: 64-bit capable Until today I thought I had a single processor with 4 independent cores. I also thought that within each core can be used different threads.

  Read the article

• glx not working, optirun works, gnome in fallback mode

  - by user26766

  It all started when I installed nvidia's own driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. Now nvidia-current seems to be functional. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) how can I fix this? thanks,

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >