Search Results

Search found 4137 results on 166 pages for 'hda intel'.

Page 57/166 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• display port on x230 not workgin

  - by Aaron

  having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

  Read the article

• Distorted text in programs

  - by Teneff

  I've installed Ubuntu 11 with gnome and in some point the text in the programs becomes unreadable like this. It's not only the text, but even the desktop background looks awful. I've tried to add section in xorg.conf, but it didn't helped out. Section "Device" Identifier "g33/X3000" Driver "intel" BusID "PCI:0:2:0" Option "ModeDebug" "on" Option "MonitorLayout" "LCD,VGA" Option "DevicePresence" "true" EndSection And this is what the lshw returns about the VGA *-display description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:dfe00000-dfe7ffff ioport:8800(size=8) memory:e0000000-efffffff memory:dfe80000-d$

  Read the article

• Unable to boot from USB boot drive for AMD Athlon 64

  - by Nagarjun

  I am trying to install Ubuntu 13.04 ISO for AMD64 Athlon processor using USB drive (8GB). I did create a bootable USB using the USB installer from Win7 intel 32bit processor (followed steps from here: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows). This USB is unable to boot on my AMD64 bit processor. The bios is able to detect the USB and once I change the boot order to USB and save exit from bios, I get a message saying "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS CONTINUE" and unable to proceed further. However earlier to this I have successfully installed Ubuntu 13.04 on to my laptop which has Intel 32 bit core i5 processor with the same procedure but my desktop which has AMD64 is failing. I also tried to create the USB installer on my desktop which has the AMD64 bit processor and tried booting which also resulted in the same error. (My desktop currently has Win XP) Please help as I have run out of options. thanks, Nagarjun

  Read the article

• Why am I stuck at 640x480 on an Optimus hybrid-graphics system?

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• Screen tearing (very noticable during video playback) with HD3000 AND HD Radeon 6630m

  - by NilRecurring

  I did not have this issue with Ubuntu 11.10. Well, to be clear, I did, but it was easily remedied with compiz workarounds. I have tried both the propriety and open source ati drivers, and the intel HD 3000 (as far as I know) should be part of the Kernel already. So I am pretty much 100% stumped given my general lack of Linux knowledge. I really enjoy this OS, would hate to have to return to Windows (read: HATE) because of something as trivial as video playback. Some details: Lenovo Thinkpad Edge e520 Intel HD 3000/AMD HD Radeon 6630m Ubuntu 12.04 64bit.

  Read the article

• Sound doesn't work anymore after replacing RAM

  - by thejh

  Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

  Read the article

• Lenovo g510 webcam not detected

  - by user280433

  I have lenvo g510. Cheese and guvcview don't detect my webcam. Its my lsubs: Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub How to fix it?

  Read the article

• I cannot change the screen brightness

  - by user1793249

  here's my problem: Ever since I installed Ubuntu 12.10 on my computer I haven't been able to change the screen brightness, it was always set to the maximum. I did take a look at this post: Decrease Backlight Below Minimum And it helped me resolved the issue with the unbearable brightness, however one problem persists: I cannot change it through "Brightness & Lock" or the function buttons (F2 and F3), when I press the buttons, the animation shows up but nothing happens. I tried the following: http://www.refreshit.info/2012/08/solved-brightness-increase-and-decrease.html It did nothing... If it helps: I have an HP-dv6 6185la, it has an ATI Radeon 6770M HD card and an Intel HD Integrated Graphics Card It only detects the "Intel® Sandybridge Mobile" Thanks in advance.

  Read the article

• Amnesia crashes

  - by Phil

  I am able to launch amnesia all the way through the menu. After I click start new game I am able to play a little bit. I hear the guy talk, then the game just closes. I installed the libtxc-dxtn-s2tc0 already as some of the similar problems I found online were fixed by doing so, but did not work for me. My graphics card is Intel GMA 4500MHD. Cpu: Intel Core Duo 2.1 Ghz. RAM: 3GB What else can I do to try and fix this? I'm pretty new to Ubuntu, I just installed it recently. What else (and how) should I post that may help you help me better?

  Read the article

• USB Port not working for Ubuntu 14.04 LTS

  - by user292125

  I have recently installed Ubuntu 14.04 LTS on my system. But the usb port does not seem to be working. When I type lsusb in terminal, following is displayed on the screen: Bus 002 Device 114: ID 0951:1665 Kingston Technology Bus 002 Device 004: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard Bus 002 Device 003: ID 04ca:0062 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. However the disk utility shows no media. Kindly help me on this. Suggestions will be appreciated.

  Read the article

• No background/wallpaper in Ubuntu 12.04 - what to do?

  - by magnesus

  This is how my desktop looks like after moving Firefox window arround: The background just doesn't redraw, there is no wallpaper. It is like that since update to 12.04 - it was the same in 11.10 but I had special intel drivers then that fixed this problem. Doesn't seem to be fixed in 12.04 even with the ppa I was using then. What can I do? I couldn't find anything about it on Google because results were unrelated. :( I have Samsung RF-511 notebook with Nvidia card turned off - so it's using only Intel from i7.

  Read the article

• Ubuntu 12.10 64 bit Slow

  - by Patrick Skiba

  I am new to linux and was wondering why launching applications is so slow. I've tried both Ubuntu 12.10 64 bit and Ubuntu 12.04 LTS 64 bit Computer Specs: Toshiba Satellite p755 CPU: Intel core i7-2670QM @2.20GHz Ram: 8 GB Using integrated intel hd 3000 graphics When I install the first thing I do is update, which takes about an hour or so. I would assume I'd be good after that, but when launching things like the firefox, system settings, thunderbird it takes a much much longer time than on Windows 7. Please help me.

  Read the article

• .xprofile isn't enough

  - by BrianXP7

  I've been trying to find a solution on how to change the screen resolution on the login screen and other users. .xprofile will only affect my account. I've been searching for a few months but I got nothing. Please help. It would be easier if the "Default Resolution" was still there in the monitors settings. Plus, I'm afraid of editing the xorg.conf. Last time was ugly... My specs: HP dc5000 Small Form Factor Ubuntu 11.10 Oneiric Ocelot i386 Intel Pentium 4 2.40 GHz Intel 82865g x86/MMX/SSE2 Integrated Graphics (Standard Experience, OpenGL 1.3 and Runs Unity 3D :P) SoundMax Integrated Audio Card Broadcomm Integrated Ethernet 994.1 MiB RAM 38.3 GB HDD Acer X203H (Maximum Resolution 1600x900)

  Read the article

• cant boot with graphics in uefi

  - by user205996

  I really searched for information to this problem but none of the guides or threads on forums have helped, either i cant search or this havent come up. No nomodeset, forcevesa, turning brightness up or anything have worked.... I bought the laptop with ubuntu 13.04 preinstalled, bumblebeedrivers were on it but primusrun broke on the ubuntu 13.10 update. Decided to reinstall ubuntu and install windows at the same time, so now I got windows up and running from uefi and have installed ubuntu 13.10, grub works for windows and everything seems like normal. But when I try to boot ubuntu i cant manage to boot into anything else than failsafe rootterminal. Screen just go black or i have a blank terminal flashing i upper left corner.... Dont know anything about X configuration or what to do. If anyone has an idea please let me know. Laptop: Clevo w230st intel i7 haswell intel hd4000 (?) nvidia gtx765m

  Read the article

• screen driver problem

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• Can my computer run Ubuntu? [duplicate]

  - by Harry B

  This question already has an answer here: How do I find out which version and derivative of Ubuntu is right for my hardware in terms of minimal system requirements? 2 answers Just want to check if my computer can run Ubuntu. It is an old IBM ThinkPad, so here are the basic stats I could find: IBM 28832ZU Processor Intel(R) Celeron(R) M processor 1300MHz Processor Speed 1.27 GHz Memory (RAM) 2048 MB Operating System Microsoft Windows XP Professional Operating System Version 5.1.2600 Intel Extreme Graphics 2M And here is some info pulled from the graphics panel NTEL(R) EXTREME GRAPHICS 2 FOR MOBILE REPORT Report Date: 06/28/2013 Report Time[hr:mm:ss]: 17:53:20 Driver Version: 6.14.10.3943 Operating System: Windows NT* 5.1.2600 Service Pack 2 Default Language: English DirectX* Version: 9.0 Physical Memory: 2038 MB Min. Graphics Memory: 8 MB Max. Graphics Memory: 64 MB Graphics Memory in use: 7 MB Processor: x86 family 6 Model 9 Stepping 5 Processor Speed: 1296 MHZ Device Revision: 2 Output Devices Connected to Graphics Accelerator * Active Notebook Displays:1

  Read the article

• Ubuntu 14.10 no GUI or term login

  - by Lito

  I have updated yesterday my Ubuntu 14.10 installation with apt-get dist-upgrade. I was working all afternoon and after that I have rebooted computer. Once done it, lightdm doesn't starts (only gnome logo) and I can not view any of Ctrl + Shift + [1-6] terminals (cursor is blinking). I have read a lot of posts with no success: nividia/intel conflicts (I have a laptop with an Intel graphic card) I have enabled nomodeset and tried all this options My computer boots to a black screen, what options do I have to fix it? I have repaired grub I can load recovery/livecd/windows and mount partitions and network without problem I have all packages and system updated Here my logs. X11 not shows any error or problem, is loading all needed drivers without problem. How can I raise the level of debug? Best regards.

  Read the article

• Which version of Ubuntu is recommended for Samsung N270 notebook?

  - by Patu

  I have just installed 12.04 LTS 32bit because it was recommended but it seems slow, slightly slower than the EX family edition windows which came with the notebook and I used for 3 years.... so it makes me wonder if this is the correct version of Ubuntu for me. (or.. maybe I need to install the driver for my built in graphic card? or anything else.) specs: Samsung N270 notebook. Intel Atom cpu N270 @ 1.6GH X 2. 1GB RAM I am not sure the type of graphic card I just know that it is built in of Intel. Thank you guys for the help. Patu.

  Read the article

• Is there any remote desktop with sound and video capabilities allowing 2 different users work simultaniousely (a local and a remote one)?

  - by psihodelia

  I have a very powerful PC with Intel processor and a small Mac laptop with PowerPC processor. Both computers are with Ubuntu Linux. Mac laptop cannot play flash videos and I cannot install any Intel-CPU program on it (like Skype). So, it means I can install only open source applications on the laptop from Ubuntu repositories. I have two different Ubuntu system users on PC, say ME and SHE (and root as well :) ). If I work as user ME on PC, then user SHE should also be able to access my PC remotely from her laptop and she should see a desktop of user SHE, not my desktop. She also must be able watch videos, flash, and listen sounds. Is it possible with Ubuntu?

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

  - by knda

  I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

  Read the article

• My EliteBook is not auto picking 1080p for external monitor, poor display on forcing

  - by Griever

  I'm connecting my Samsung LED S22A300B to my HP EliteBook 6930p through VGA out. Laptop has Intel 4500MHD video card. I have latest drivers installed for both card and monitor. Only 800x600 and 1024x768 are shown. A lot of other people get this problem when they use it with docking station as discussed here. But I am not using any docking station. The monitor works great with my desktop though. As advised on the aforementioned page, one of the things I tried was to force the resolution using Intel's "custom resolution" feature. I installed PowerStrip on my desktop and copied advanced timing values(front/back porch,sync width, etc.) from there and then used the same values while defining a custom resolution in my laptop's Intel graphics utility. As a result, I got the 1080p resolution but the display is poor. Text has some weird colored shadow and sometimes on images too. What should I do?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >