Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 55/287 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Internet (HTTP) is not working on Sony Viao

  - by vijay

  I switched my sony viao laptop from XP to ubuntu 10.04 recently. I have it connected through router at home. The internet was working fine with XP. With ubuntu, i am not able to connect to interenet. I am able to update using apt, and i am able to ping too. It seems like there is a DNS issue, when i try to goto sites from firefox, it doesn't work. I tried disabling the ipv6 in firefox config, it doesn't work. My router is on 192.168.2.1 instead of 192.168.1.1 any ideas on what config i might need to change to make this work? or could this be a drive issue?

  Read the article

• How to get wireless and wired network working again on my Dell Inspiron 1501?

  - by Angelo Daul

  My wireless doesn't work with Ubuntu 12.04.(it worked with 10.04 LTS) I have a Dell Inspiron 1501. I followed the steps posted below:(from a similar tag, but...) sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source echo "blacklist brcmsmac" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist bcma" | sudo tee -a /etc/modprobe.d/blacklist.conf ....and now i have no Network device on my PC(wired or wireless) I can use wired conection if i start my laptop with a"previsious version of Linux"...2.26.43... I am a beginner in Linux These are my hardware: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [ 14e4:4311] (rev 01) 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [ 14e4:170c] (rev 02)

  Read the article

• I can not print on Windows 7 shared printer

  - by lrichard

  For a while I can not print from my Ubuntu 12.04 64 bit pc on a Windows 7 shared printer. Before that everything was ok. The printer is HP LaserJet 1100. The error message is: "File "/usr/lib/cups/backend/smb" not available: No such file or directory" I have tried to reinstall the samba, I have configured the workgroup properly. I have tried to reinstall the printer on the Ubuntu machine with the proper address, or with lpd (I have read somewhere). If I restart the printer on the cups web interface ("Resume Printer") the problem seems to be solved, but not. (The printer seems to be idle, and if I want to print, I still get the error message.) I have checked the share rights on the Windows 7 pc, and I think it is ok.

  Read the article

• How to join a Windows Domain an Map NEtwork Drives on Ubuntu Partition

  - by AgainstClint

  I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

  Read the article

• How To Setup Domain Name for SchoolTool Local Server

  - by zeroseven0183

  I am currently testing SchoolTool 2.0 and I would like to do some things: This application is installed on a virtual machine running Ubuntu Server 11.10 bridged to our home network. The site is accessible through IP address. What I would like to do is setup a local domain, say schooltool.ourhomedomain.com. I thought my sister would appreciate it more if it were not via IP address. If there's anymore information needed, let me know. Thanks in advance!

  Read the article

• Why hamachi time-outs after 5 minutes or so?

  - by Vik89

  I installed hamachi and hamachi-gui on my girlfriend's pc and on my girlfriend's netbook. After 5 minutes or so (even if I keep using it during that time) it loses the connection, I mean I have to 'go offline' and then 'go online' again for it to see my ip again. If I don't and I ping my IP, it says 'Host unreachable'. If I connect with my Mac from the office the problem doesn't exist, so I wouldn't say it is a problem of my hamachi (server) installation, I'm tempted to say it is a problem of my girlfriend's connection, since it happens from her home, and we haven't tried yet to connect from another home with her setup. What would you say? I followed these instructions http://ubuntuforums.org/showthread.php?t=135036

  Read the article

• Network doesn't work after upgrading to 13.10

  - by Inkbug

  I upgraded from 13.04 to 13.10, and a number of things stopped working. Most importantly, I don't have internet access anymore. When I go to the network settings, I receive the following error: The system network services are not compatible with this version. The only settings that show up in the network settings are the proxy settings. I tried sudo service network-manager start and sudo service network-manager restart, but it told me the service was already running. In addition, the menu bar is missing all of the indicators (such as keyboard layout, sound, network, clock, and the gear icon). Is this related or a separate issue?

  Read the article

• MAC filtering after DHCP

  - by user1655161

  How to manage filtering by MAC in Ubuntu? Scenario: Ubuntu DHCP is configured and working (network 192.168.1.0) a) Laptop 1 is set in configuration on Ubuntu as static IP Laptop 1 is configured for automatic IP and when is connected to server everything works. I'm taking laptop 2 which is configured as static IP 192.168.1.10 and his configuration is not set in Ubuntu dhcpd.conf After laptop 2 is connected internet working. It is possible to do MAC filtering which disallow to connect PCs with address IP set as static but MAC address is not configured in Ubuntu (something like: intruder in network)?

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• Data structure for file search

  - by poly

  I've asked this question before and I got a few answers/idea, but I'm not sure how to implement them. I'm building a telecom messaging solution. Currently, I'm using a database to save my transaction/messages for the network stack I've built, and as you know it's slower than using a data structure (hash, linkedlist, etc...). My problem is that the data can be really huge, and it won't fit in the memory. I was thinking of saving the records in a file and the a key and line number in a hash, then if I want to access some record then I can get the line number from the hash, and get it from the file. I don't know how efficient is this; I think the database is doing a way better job than this on my behalf. Please share whatever you have in mind.

  Read the article

• can't open youtube or vimeo

  - by wrt

  I can't open Youtube.com on computer with lubuntu and mint. I see that my flash works properly on other sites. Problem is in for example on youtube (yming.com loading without endless) and vimeo. I tried to use firefox and chromium. I thought that it would be problem with dns (I have dns from DHCP - opendns) so I changed to google dns but it didn't help to solve problem. When I use text browser - Links these site are opening well in text mode. I think that the problem is with flash or java. On other computer with windows connected to the same network these sites are being opened without problem. I am on the point that I don't know what to do next, because I tried to install and uninstall flash several times. I tried Flash-Aid as well.

  Read the article

• Windows Phone 7 Networked Game

  - by Craig

  Im creating a multiplayer asteroids type game for the Windows Phone 7, 2 players can challenge each other over who will get the highest score. On each players phone the opponent is displayed and both go about shooting asteroids and enemies. In an assignment I have due I would like to talk about the packet design, what would be the least amount of info that I can send over the connection? Instead of constantly having to send each players position, asteroid position, bullet position and enemy position etc. Or would all that data constantly need to be sent?

  Read the article

• How to make my proxy settings change depending on the network I connect to?

  - by Little Jawa

  My company's corporate network requires me to set a network proxy to access the net, but when I am anywhere else, I don't need it. The proxy settings in Ubuntu (System - Preferences - Proxy server) allowed me to create "locations" that I can manually select. Then I have a "default" location (with no proxy) and a "work" location (with my company's proxy in it). Is there a way to make Ubuntu automatically select the "work" location based on the connection I'm using? I thought I could use the IP subnet (very specific) to detect where I am, but I have no idea how to set it up... Edit: I really need to have the proxy settings set at the system level. All my network connections (IMAP, SMTP, chat, etc) need to go through the proxy. Not only the web browser.

  Read the article

• Forti VPN Client not connecting to a server under Ubuntu 14.04

  - by deonis

  I've just updated to a new version of Ubuntu (14.04 86x64) and I got a very strange problem with Forti VPN Client. It seems running smoothly, but when I try to connect via GUI or terminal it hangs at the connection stage. here is what I see in terminal: STATUS::Setting up the tunnel STATUS::Connecting... #and this takes forever I know that it's not the problem with the server, the client works no problem on windows. Thank in advance ...

  Read the article

• alx driver not working properly

  - by user292768

  My alx driver seems to be working fine for everything except apt-get. I can navigate to web pages, the ping command works just fine, but whenever I try to do apt-get update or apt-get install it hangs on trying to connect to whatever archive it's trying to pull info from. There's no error message, nothing to imply that it can't connect, it just hangs there and does nothing at all. I've tried re installing alx, upgrading/downgrading my linux kernel, downloading source and building alx from scratch, etc etc but nothing works. Does anybody else have this problem/know how to fix it?

  Read the article

• Backup networks

  - by MegaBrutal

  My USB Wi-Fi adapter tends to overheat and when it happens, it stops working until I pull it out and plug it in again. Since I often access my machine remotely from other places, when it happens, my machine gets inaccessible for me until I get home to fix it. I'm thinking, I have another USB Wi-Fi adapter in spare. Would it be possible to plug it in that too but tell Ubuntu to only use it when the primary Wi-Fi adapter becomes off-line? (I won't use the other Wi-Fi adapter as primary because it provides significantly less quality.)

  Read the article

• Looking for open-source solutions for a knowledge sharing website

  - by Bundarr

  There is a need in my workplace to setup a knowledge sharing site, a place where users can discuss projects they are working share documentation ask questions I am looking for a open-source system that answers these needs, and that can be setup in a week, and requires only PHP and MySQL. I am a Wordpress fan and developer and could easily implement such a system in Wordpress, however this system needs to be very simple to use for the technically challenged. Without customization, Wordpress users would still need to login to the "back-end" to post. I like the Stackexchange (OSQA) format, but these do not allow for file uploading out of the box. I do not have experience with Buddy Press, would this be an alternative?

  Read the article

• How to write the path to a Windows shared folders address in terminal?

  - by user206996

  I want to permanently mount a few Windows shared folders. I googled that topic and found a lot of good answers, but with all the solutions I have a little problem: I believe I can't properly give an address of shared folder. I can find it following way: "Network" - "Windows Network" - "WORKGROUP_name" - "Computer_name" - and there is some folder i would like to mount. How can I write the path to the folders in terminal? UPD i can access needed folder throw address in location bar smb://server/ro/, but i try mount it by editing /etc/fstab file (using guide https://wiki.ubuntu.com/MountWindowsSharesPermanently) i get error mount error: could not resolve address for server: Unknown error PS in /etc/fstab : //SERVER/RO /media/server cifs username=user,password=pwd, uid=1000,iocharset=utf8 0 0

  Read the article

• How to join a Windows Domain and Map Network Drives?

  - by AgainstClint

  I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

  Read the article

• Network/browser issues after upgrade to 12.04

  - by Reg

  I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

  Read the article

• Fail to access Network options

  - by Konstantinos Marinis

  I am trying to use OpenDNS for my newly installed Ubuntu 12.10... However I cannot insert custom DNS addresses... I am accessing Network, then at my wireless connection, no matter how many times I press the "options" tab at the low right corner (I am not using english Ubuntu, so the button might have a different name), nothing happens. Any ideas why or how should I configure my OpenDNS connection?

  Read the article

• How can I refactor my code to use fewer singletons?

  - by fish

  I started a component based, networked game (so far only working on the server). I know why singletons can be bad, but I can't think of another way to implement the same thing. So far I have: A GameState singleton (for managing the global state of the game, i.e. pre-game, running, exiting). A World singleton, which is the root entity for my entity graph An EntityFactory A ComponentFactory I'm thinking about adding a "MessageDispatcher" so individual components can subscribe to network messages. The factories do not have state, so I suppose they aren't so bad. However, the others do have global state, which is asking for trouble. How can I refactor my code so it uses fewer singletons?

  Read the article

• error: gnutls_handshake() falied

  - by Nyambaa

  When I try to connect any HTTPS server with git, it gives following error: error: gnutls_handshake() failed: A TLS packet with unexpected length was received. while accessing ... fatal: HTTP request failed So I think that maybe some packages that related the gnutls_handshake has been broken. So I want to reinstall that packages, which packages can be related this errors? or how do I fix this kind of error?

  Read the article

• Common Network Administrator Tools

  - by No Time

  I would like to make a custom clump of Network Admin packages, to be able to carry on a thumb drive, to administer Debian based machines. Examples of what I would include so far: nmap traceroute vnstat zenmap * I know every situation may be different, but I would like to build a toolbox I could bring everywhere, and am looking for advice on other tools which would work. (If there is a similar question, I am fine being directed there)

  Read the article

• Configuring network to set wlan0 as primary

  - by Sheed

  I recently had to rebuild my pc and decided to go for ubuntu 14.04. I think the mistake I made was I started from a 12.04 install disk instead of the 12.10 disk I'd used previously and when given the option set my primary connection as ethernet (because the wireless option didn't work). After upgrading to 14.04 etc, I managed to get the wireless working, or more using steps like ifconfig -a and the likes I managed to prove that the wireless card etc. is all installed and working. However every time I boot without a hard wired connection plugged in I get the message "waiting for network configuration". I can then once it's booted without a network get my wirless working using sudo ifconfig wlan0 up iwlist wlan0 scan This seems to kick the wireless module into life and it appears in the GUI and I can then select a network, however all the options like edit network and disconnect etc are all greyed out. What I would like of course is if the WLAN0 was just set as my primary default network so I've been looking for a solution to this and it would seem that I need to adjust the old /etc/network/interfaces file but when I try to do so using the sudo vi /etc/network/interfaces command I, well I simply have no idea what I'm doing. Other than that typing :q! gets me out of there before I do to much damage! As far as I can tell (by navigating to the file in the GUI) the output of my /etc/network/interfaces is as follows: (obviously not including the " in each line that's just to break the heading rule of the #) "# This file describes the network interfaces available on your system "# and how to activate them. For more information, see interfaces(5). "# The loopback network interface auto lo iface lo inet loopback "# The primary network interface auto eth0 iface eth0 inet dhcp If this is the case then this clearly doesn't contain what it should do but I don't how to fix it. Nor do I even know if I'm on the right track. Any help would be appreciated thanks :)

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >