Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 54/287 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Transfer a ssh session between the same physical devices from one network to another

  - by Vivek V K

  My server has 2 IP addresses via two networks. Due to some restrictions,my client will be able to access only one of the network at a time. Hence, I want a way to transfer a live ssh session with all the open applications seamlessly from one network to another. The physical devices (client and the server) are the same. What changes is the network through which it connects. can this be done? Thanks!

  Read the article

• Wired connection not being recognized

  - by maxifick

  I'm on Ubuntu Maverick (10.10). I've read a few threads regarding wired connection problems, but haven't found a solution yet. The problem appears after I connect to a wireless network. When I disconnect wireless and plug in an internet cable, the wired connection is not recognized at all. Even the socket appears dead (there are no diodes flashing). The only solution so far seems to be restarting the computer. Network Manager then tries to connect to a Wi-Fi, but the wired connection is listed and working. I've tried sudo restart network-manager, but that doesn't solve anything. After a while, available wireless networks start appearing, but the wired still doesn't. Any ideas? Thanks in advance. Edit: Here is the dmesg output after switching off Wi-Fi and then plugging the internet cable. [18200.623543] Restarting tasks ... done. [18200.648422] video LNXVIDEO:00: Restoring backlight state [18200.707580] sky2 0000:02:00.0: eth0: phy I/O error [18200.707715] sky2 0000:02:00.0: eth0: phy I/O error [18200.707819] sky2 0000:02:00.0: eth0: phy I/O error [18200.707922] sky2 0000:02:00.0: eth0: phy I/O error [18200.708025] sky2 0000:02:00.0: eth0: phy I/O error [18200.708127] sky2 0000:02:00.0: eth0: phy I/O error [18200.708229] sky2 0000:02:00.0: eth0: phy I/O error [18200.708332] sky2 0000:02:00.0: eth0: phy I/O error [18200.708824] sky2 0000:02:00.0: eth0: enabling interface [18200.709587] ADDRCONF(NETDEV_UP): eth0: link is not ready [18202.662422] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18203.324061] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18211.193137] eth1: no IPv6 routers present [18212.844649] usb 5-1: new low speed USB device using ohci_hcd and address 5 [18213.017235] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input16 [18213.017499] generic-usb 0003:0461:4D17.0004: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0 After system restart, dmesg says this: [ 19.802126] sky2 0000:02:00.0: eth0: enabling interface [ 19.802394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.812533] device eth0 entered promiscuous mode [ 21.495547] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.495677] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.496574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

  Read the article

• Mouse Not Detected & Network Not Connected After Installing Ubuntu 12.04 Desktop via Live USB

  - by albus_severus

  I just recently (+- 30 minutes ago) install Ubuntu 12.04 Desktop on my pc (dual boot) via Live USB (i check the "automatically install upgrade" option when installing it). unfortunately, at the login screen after the installation finished (after reboot), i cannot use my mouse! also, an error message occur saying that network connection is not available. but, when i restart again and using the "try Ubuntu without installing" in the Live USB, the problems didn't occur. i tried to googling this but failed to find any solution. and yes, i am totally green on Ubuntu and Linux. so, please, help me on this. thanks in advance.

  Read the article

• Problem with connect to server using FTP(with login)

  - by Sourav Chattopadhyay

  I am unable connect to my remote account using Ubuntu's "Connect to Server" option after moving on to Ubuntu 12.04 LTS. In Ubuntu 10.10 I used to connect to my FTP server by going to Places-Connect to server-FTP (with login) After giving the userid and password the remote folder would mount immediately but now it is showing a busy icon at top until I close the window after some time. I have also tried to connect using Ctrl + L from a Nautilus window using sftp://user@server but result is the same. Even though I could connect to my FTP server using gFTP, the default one from Nautilus is a better option to me.

  Read the article

• Ubuntu 12.04 - PPTP VPN is the only Internet Access

  - by user212553

  I know this has been covered. I've read dozens of posts but still have questions. I have a work server whose traffic should never leave my house without encryption. The VPN is PPTP. Currently I have a cron job that checks the status of the ppp0 adapter each minute. If the connection drops, which it does fairly often, it shuts key components down. It's fairly easy to restart PPTP with "nmcli con up id 'myVPNServer'" but there's no assurance it will reconnect and I need a better way to stop traffic (other than killing apps) when ppp0 is down. The two options I've seen discussed are the firewall (UFW, Firestarter, IPTables) or the route tables. I could be easily swayed to consider the firewall option but I focused on the route tables since no new function needs to be started. My questions involve the way the route tables change and then specifics on rules. When I start the PPTP VPN the route tables change. That suggests that if the VPN drops, the table will change back, defeating my stated intent of preventing external traffic. How can I make "sticky" changes to the route table that will persist even if the VPN connection drops? Perhaps the check boxes "Ignore automatically obtained routes" or "Use this connection only for resources on it's network" (which are part of the VPN configuration options)? It would seem that, if I can force the active VPN route table to stay in effect, even when the VPN drops, that this will effectively kill any external traffic should the VPN drop. This will give me the latitude to run a routine to restart the VPN from the command line (assuming the route table rules don't prevent me re-establishing the connection). My route table, with the VPN active is (ip route list): Any comments on what 10.10.1.1 is? $ ip route list default dev ppp0 proto static 10.10.1.1 dev ppp0 proto kernel scope link src 10.10.1.11 VPN_Server_IP_Address via 192.168.1.1 dev eth0 proto static VPN_Server_IP_Address via 192.168.1.1 dev eth0 src 192.168.1.60 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.60 metric 1

  Read the article

• How can an application (like Firefox) be forced to use a certain network interface?

  - by Lekensteyn

  I've two interfaces: eth0 and wlan0 on a notebook. Possible use cases: eth0 grants me Internet access, and wlan0 is currently connected to a router which does not have Internet-connectivity. For development purposes, I need to connect to the wlan0 by default, but use eth0 for surfing eth0 and wlan0 are both connected to the Internet. For a torrent application, eth0 should be used for speed, but for portability of the notebook, SSH should have a connection over wlan0 eth0 is a wire connection, wlan0 is a wireless one. Sensible data should be transferred over eth0, but other traffic can go over wlan0 as well. Is there a way to force applications (like nc.traditional or firefox) to use a certain network interface? A wrapper like example-wrapper eth0 program is fine too if such program exist. It would be nice if it could configured within Firefox (in runtime). I'd like to avoid IPTables solutions if possible.

  Read the article

• WIFI/LAN not working after Installing Ubuntu 13.10

  - by user183025

  I can't connect to my WIFI after installing Ubuntu 13.10. I tried re-installing it three times (thinking that I did something wrong during the installation) but I still can't connect to my WIFI. It just gives me the message that I'm offline and that I can't connect to my WIFI. I also tried connecting to the internet using LAN cable but with the same results. I tried google but it seems that there's no solution to this yet.... Anybody knows how to solve this? Thanks! FYI: H/W path Device Class Description ====================================================== system RC530/RC730 (To be filled by O.E.M.) /0 bus RC530/RC730 /0/0 memory 64KiB BIOS /0/4 processor Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz /0/4/5 memory 32KiB L1 cache /0/41 memory 4GiB System Memory /0/41/0 memory DIMM [empty] /0/41/1 memory 4GiB SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) /0/100 bridge 2nd Generation Core Processor Family DRAM Controller 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34) Subsystem: Intel Corporation Centrino Wireless-N 130 BGN Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Samsung Electronics Co Ltd Device c0c1 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at b000 [size=256] Memory at f2104000 (64-bit, prefetchable) [size=4K] Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

  Read the article

• How to deploy a single website to multiple physical servers.?

  - by user70122

  I want to deploy my PHP and Ajax based Dating website to multiple physical servers. Does anyone know the method. Is there possible any method to save the files and setting (and also the user input), on all of the physical server, so that the servers do the following jobs. Servers used as a network, speeding up the process giving a robust thing to the end user. Data to be stored on all the servers' hard drivers, and Every server have the internet connection from different provider, so for example a. if any of the internet providers gets down, or b. there occur any hardware or power failure, the website still runs, without a break and without any data loss. Does anyone know about some online course, or some comprehensive tutorials about this topic ?

  Read the article

• Wireless network disabled

  - by neil delmonte

  After installing Ubuntu 11.04, my network has become disabled. Here is the output oflshw in terminal: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 00:21:00:58:65:5f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:d4600000-d4603fff

  Read the article

• All traffic is passed through OpenVPN although not requested

  - by BFH

  I have a bash script on a Ubuntu box which searches for the fastest openvpn server, connects, and binds one program to the tun0 interface. Unfortunately, all traffic is being passed through the VPN. Does anybody know what's going on? The relevant line follows: openvpn --daemon --config $cfile --auth-user-pass ipvanish.pass --status openvpn-status.log There don't seem to be any entries in iptables when I enter sudo iptables --list. The config files look like this: client dev tun proto tcp remote nyc-a04.ipvanish.com 443 resolv-retry infinite nobind persist-key persist-tun persist-remote-ip ca ca.ipvanish.com.crt tls-remote nyc-a04.ipvanish.com auth-user-pass comp-lzo verb 3 auth SHA256 cipher AES-256-CBC keysize 256 tls-cipher DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA

  Read the article

• Connected to Access Point but no internet connection?

  - by ReaZem

  I am trying to use my school's WPA Enterprise network to access the internet with my Three-OS laptop. I currently have Windows7, Ubuntu11.10 and Backtrack5 installed. I can use my home's WPA2 network without any issues with the 3 OS. I can successfully connect to my school's network with the 3 OS but I can only browse the internet with windows7. Ubuntu network-manager and Backtrack WICD both say that I am connected to the Acces Point but I cannot browse the internet. I have tried uninstalling network-manager and installing WICD but it did not solve the problem. Every time I connect to the Access Point, I am able to browse the internet for about 10 seconds. I have tried disabling IPV6 I have tried changing DNS.

  Read the article

• WiFi USB adapter showing the Network ..... but no connection in effect

  - by Idrees

  I have Pentium 4 system 3 GHz, 1 GB RAM ..... (no built-in WiFi) I installed Ubuntu 12.10 on my PC, works fine. It picked all the drivers for audio, video itself. I plugged TP-Link 54Mbps High Gain Wireless USB Adapter (TL-WN422G) ..... (link for the device: http://www.tp-link.com/en/products/details/?model=TL-WN422G) Now what happens is that the WiFi network is detected and shown in the "Network Connections", and it is also connected to it but when I open Firefox it is as if there no internet connection at all.

  Read the article

• ssh login information

  - by bob

  As the admin of my machine, I want users to be able to log into my computer with ssh, but I'm looking for a graphical way to be notified that a user is connected at the moment. If multiple users are connected, I want a list of connected users, their location, name, etc. This could be in the form of a forceCommand and 'alert' command when someone logs in, plus a icon saying how many people are connected right now in the notification bar, with the option to click on it to have more information about these users. Is there such a tool available in ubuntu, and if not, how to do it (I'm guessing it's not that difficult and could be done with under ten bash command lines) ?

  Read the article

• Techniques to prevent non-official clients in network gaming?

  - by UpTheCreek

  In multi-player network games, what techniques exist to try to ensure that users are connecting with the official client application, and not some hacked client app? I realise there is probably no sure-fire way to do this, but rather I'm interested in techniques that can be employed to mitigate the problem. I'm especially interested in any techniques that can be used for web based games, but I imagine most can be applied generally. Thank you!

  Read the article

• Client Side Prediction

  - by user13842

  I have a question regarding Client Side prediction. Ive tried to search topics about my specific problem but couldn't find anything which really answered my problem. Most tutorials and explanations assume that the Client sends messages like "Move my player up by 1 Position", but what if i send messages like "Set my player's velocity to x"? Since it's hard to explain with text, i made a graphic explaining my problem. The main problem is, that the player sets his own velocity, due to Client Side Prediction, earlier than the Server. So if 2 different velocities overlap, the Server would get out of sync. How can i tackle that problem? Thanks a lot. Graphic: http://img27.imageshack.us/img27/6083/clientpred.png (Ignore the 5.5cm)

  Read the article

• Wired connection not working

  - by YokoBlac

  I am using a Acer Aspire One. Here is the Ubuntu Wiki Page about my computer. I have a working wireless connection however when I plug a cat5 (Ethernet) cable in the lights flicker on the computer, but then nothing happens. Output of iconfig: eth0 Link encap:Ethernet HWaddr 00:1e:68:96:1a:6b inet6 addr: fe80::21e:68ff:fe96:1a6b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2622 (2.6 KB) TX bytes:936 (936.0 B) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) wlan0 Link encap:Ethernet HWaddr 00:22:68:92:7f:36 inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:68ff:fe92:7f36/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5702 errors:0 dropped:0 overruns:0 frame:0 TX packets:5284 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4117327 (4.1 MB) TX bytes:936709 (936.7 KB) Any understanding of this output is greatly appreciated.

  Read the article

• problems establishing ssh connection

  - by Superbyte

  since two days I am facing a really weird problem. I have receantly installed ubuntu server 14.04 LTS on a workstation. It has a fix IP address, which I can successfully ping from other computers in the network. But when I try to establish a ssh connection from a windows computer via putty I get some strange errors, which I cannot fix. The Problem is that putty takes a really long time trying to establish a connection. After about 10 seconds I get the following error: Network error: Software caused connection abort But when I click the Restart Session option a several times after putty shows the error message, I can login in. But now comes the other problem. When the login appears on the putty console I type in the user, but it really takes a long time until I can type in the password to login. This is what I already tried: sshd: ALL in etc/hosts.allow commented line session optional pam_motd.so in etc/pam.d/login and etc/pam.d/sshd configured the firewall with: sudo iptables -A INPUT -p tcp --dport ssh -j ACCEPT checked if ssh server is listening on port 22 UseDNS no in etc/ssh/sshd_config I hope someone can help me, because this problem is really annoying. Thanks in regard

  Read the article

• Connect to wifi ubuntu 14.04 (new ubuntu user)

  - by user289168

  I have recently changed my operating system from windows 8 to ubuntu 14.04, when trying to connect to the network via wifi the system just keeps asking for my password over and over without connecting. The connectivity through an Ethernet cable is perfectly fine however and my wifi worked fine through windows 8, I have very little ubuntu knowledge so i apologise if the right information is not shown in this question. Just wondering if there was any known problems or if anyone has seen this before? Thanks in advance for any help, Tom

  Read the article

• How to set up dual wired and wireless connections?

  - by Col

  My laptop has both wireless and a wired connection capabilities. Can I connect to a router A using wireless and a separate router B using wired ethernet at the same time without having to switch back and forth? Thanks for replying so quickly. I wish to connect to two separate networks. The wireless connection is to router A which is connected to broadband internet. The wired connection is to router B which I wish to share files and a printer on 1 or 2 other desktops also using wired connections on B and maybe using synergy to have only one keyboard and mouse for 2 desktops. The wireless laptop is the only one required to have internet access.

  Read the article

• Cannot find other computers on the network

  - by RDNY

  I have several issues trying to connect to my network. This is not the problem connecting to the Internet through the same router. All my computers are running Windows 7, Vista and XP Pro. I can't see them and they can't see me either. I've already install Ubuntu Studio 11.10 three times and still not showing the network icon at all. I'm new to UBUNTU and LINUX in general. I can't find my group name either.

  Read the article

• Having trouble installing Bradcom STA driver

  - by user192881

  I just installed Ubuntu and love it so much, its so fast now. But I have a problem connecting to the internet. I checked and saw I have to install the driver Broadcom STA wireless driver but every time I do try to install it it says: Sorry, installation of this driver failed. Please have a look at the log files for details: /var/log/jockey.log I went to the terminal and copy and pasted the log file name. and when I did it, it said I have no permission to access this file. I checked on the forums that I have to be on a wired connection. So I plugged my laptop into my router and I got internet then tried to install the driver again. And it was loading then when it got to the end the same message popped up. Also I have one of those little USB router things you plug into the computer and it gives you internet I have been using that but its to slow. So I want to use the one in my computer but cant. Also I tried the command: sudo modprobe wl and when i type that command in it says: FATAL: Module wl not found Also I'm using Ubuntu 12.04

  Read the article

• how to congest a link using iperf

  - by navaz

  I have setup like below. Switch1-------------------- Switch2 | | | | | | | | | | | | PC1 PC2 PC3 PC4 I have a video traffic is flowing between PC1 and PC4. I have configured PC2 as iperf server. ( iperf -s ) and PC3 as client . (iperf -c 10.10.10.2 -P 20 -t 10000) where 10.10.10.2 is PC2 IP. now I am seeing most of the traffic in a link (switch1---switch2) is iperf. (TCP). I have observed from the logs that 1 out of 300 packet is UDP. Still I am not seeing any difference in the quality of video streaming in PC4. It looks similar compared to the case with no iperf. I am checking QOS, I have tried many options with iperf, couldnt succeed. I want to diminish the quality of video streaming in PC4. Could you please tell me what options can be used along with iperf to do it. Bandwidth between Switch1---switch2 is 1Gbits/sec. Thanks in advance

  Read the article

• How to run just one application over ethernet while others on wifi

  - by db42

  I normally connect my laptop via wifi. However, I would like to use synergy to share my workplace desktop machine with my laptop. But the problem is that my desktop machine doesn't have wireless support. So, I have no other options except using ethernet to connect them. My first question is - Is it possible to use ethernet for synergy and keep using wifi for all other application. If the answer is yes, can somebody please guide me how to achieve this. Thanks,

  Read the article

• Internet (HTTP) is not working on Sony Viao

  - by vijay

  I switched my sony viao laptop from XP to ubuntu 10.04 recently. I have it connected through router at home. The internet was working fine with XP. With ubuntu, i am not able to connect to interenet. I am able to update using apt, and i am able to ping too. It seems like there is a DNS issue, when i try to goto sites from firefox, it doesn't work. I tried disabling the ipv6 in firefox config, it doesn't work. My router is on 192.168.2.1 instead of 192.168.1.1 any ideas on what config i might need to change to make this work? or could this be a drive issue?

  Read the article

• How to join a Windows Domain an Map NEtwork Drives on Ubuntu Partition

  - by AgainstClint

  I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >