Search Results

Search found 12028 results on 482 pages for 'drive letters'.

Page 56/482 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• hp proliant dl360 disk diagnostic issue

  - by user1039384

  We recently got two used drives (15000) and installed on our HP proliant dl360 G5 server. Created RAID1 and used HP SmartStart CD to perform diagnostics. Interestingly, the Diagnostic tab immidiately fails on Logical drive testing saying the Disk1 should be replaced, while the Test tab successfully runs all the complete tests on both disks and does not find any issue. At the meantime, when booting to esxi 5, vSphere periodically shows the Disk1 as Unknown and Logical drive in recovery process. This happens every 5-10 minutes. Here is the log from HP SmartScan diagnostic: 1 - Device, Test: Logical Drive 1, Storage Controller in Slot 0 1 - Description: The controller has reported a critical error in the drive error log. 1 - Recommended Repair: This drive should be replaced. 1 - Failed Count: 44 1 - Error code: F157 There is also another error log record (see below): 2 - Device, Test: test_components/libstorage.so ID 2 - Description: An unexpected exception occurred while performing an operation. Exception message: CISS_StatusHandler::evaluate: commandStatus = 4 (INVALID); hexdump of CISS_ErrorInfo: 00000000: __ __ 04 __ 20 __ __ __ __ __ __ __ __ __ __ __ .... ... ........ 00000010: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ 00000020: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ Device: Hard Drive 2, Storage Controller in Slot 0 Property name: Bad Target Count 2 - Recommended Repair: Reboot or restart Insight Diagnostics. Retry the test. If the problem persists, upgrade to the latest version of Insight Diagnostics. 2 - Failed Count: 48 2 - Error Code: F62 Note that rebooting didn't help and I was running the latest diagnostic software version. Anyone has a clue? Is this a real disk issue? BTW, the controller is Smart Array E200i Thanks in advance

  Read the article

• What USB key would you recommend using for running a Windows 7 VM off of?

  - by Darryl Hein

  Because I can't find a good PHP editor for OSX, I develop in Windows with PhpEd. At the moment, my development time is split between a desktop and a laptop. To partially solve the problem of having 2 different environments, I have installed a virtual machine (through Virtual Box) and put the hard drive file on an external hard drive. At the moment, I've been connecting it through Firewire 800. I have 2 problems with this setup: (1) The hard drive is fairly large so to carry the laptop and hard drive I pretty much require a backpack. (2) The hard drive requires quite a bit of power and therefore reduces the battery life (by about 40%). My thought is to move the VM hard drive onto a USB key. I realize it will be slower, but as I'm just using it for PHP development, there isn't a lot of disk activity in the VM. The only really intense time is boot up, otherwise, it just about sits idle. Do anyone have any suggestions on a USB key to use for the VM? It would need to a minimum of 32GB.

  Read the article

• DVD-burner disappears when using grub

  - by drblah

  This is a rather annoying problem I have with Linux on my laptop. Whenever I install any Linux distro that relies on grub (which is about 99 % apparently) it will mess up my DVD-drive and the drive will not be recognized after booting, no matter the OS (Ubunntu, Arch, Windows Vista or 7). I know the problem has nothing to do the DVD-drive itself, because I bought a new one a few months ago. I am also sure that grub is messing the drive up, because I have tried to use LILO, which worked fine (except for horrible boot times.) This problem have persisted through about 3-4 years and it is a pretty bad show stopper whenever I want to work with Linux. I had hoped it would get fixed over time, but no one seems to have the exact problem I have. The drive is connected with an IDE connection. Update: The old drive was a Toshiba Samsung SN-S082. I don't know the model number of the new one, but it is HP (I think). Things I have tried to fix it: Mess about with some BIOS settings like enabling AHCI and change some IDE settings. Installing a different boot loader DOES fix the problem but I would like to use grub.

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• Windows Vista freezes

  - by Kakurady

  Windows Vista (32-bit) would randomly freeze on my computer, usually 15-30 minutes after login but can happen just after login. All applications would stop responding and the hard drive will not make any sound, and after a while, the mouse cursor will also stop moving. I dual-boot Ubuntu, and that still works fine. It started with the computer freezing when loading Team Fortress 2. Alt-Tab and Ctrl-Alt-Del have no effect, and the hard drive does not make any sound. I tried to verify the game data using Steam and that freezes the computer too. So I stupidly reinstalled the game. Now the game doesn't freeze when it starts, but instead the whole computer randomly freezes. This computer is a Dell XPS M1530 with a 320GB (298GiB) drive (WDC WD3200BEVT-7) split 5-ways, with Windows and Linux a partition each, one more for Linux swap space, and another two partitions for Dell diagnostic program and factory image and drivers. There was once where the hard drive would make clicking noises all day, and only stopped when I rebooted the computer. Since then, the BIOS diagnostics would fail the drive (for "self-test log contains previous errors") whenever ran. (The on-disk diagnostics cannot be run because I overwrote the MBR with GRUB.) Naturally, I thought the hard drive could be the problem. CHKDSK found one bad sector, but this seems to have no effect. System File Checker found two protected files with wrong hashes, one is some kind of IE manifest, and the other is a tcpmon.ini. Neither of them can be restored because their back up copy also have wrong hashes. Nothing about system failures in the event viewer. What should I do next?

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

• SQL SERVER – Sends backups to a Network Folder, FTP Server, Dropbox, Google Drive or Amazon S3

  - by pinaldave

  Let me tell you about one of the most useful SQL tools that every DBA should use – it is SQLBackupAndFTP. I have been using this tool since 2009 – and it is the first program I install on a SQL server. Download a free version, 1 minute configuration and your daily backups are safe in the cloud. In summary, SQLBackupAndFTP Creates SQL Server database and file backups on schedule Compresses and encrypts the backups Sends backups to a network folder, FTP Server, Dropbox, Google Drive or Amazon S3 Sends email notifications of job’s success or failure SQLBackupAndFTP comes in Free and Paid versions (starting from $29) – see version comparison. Free version is fully functional for unlimited ad hoc backups or for scheduled backups of up to two databases – it will be sufficient for many small customers. What has impressed me from the beginning – is that I understood how it works and was able to configure the job from a single form (see Image 1 – Main form above) Connect to you SQL server and select databases to be backed up Click “Add backup destination” to configure where backups should go to (network, FTP Server, Dropbox, Google Drive or Amazon S3) Enter your email to receive email confirmations Set the time to start daily full backups (or go to Settings if you need Differential or  Transaction Log backups on a flexible schedule) Press “Run Now” button to test You can get to this form if you click “Settings” buttons in the “Schedule section”. Select what types of backups and how often you want to run them and you will see the scheduled backups in the “Estimated backup plan” list A detailed tutorial is available on the developer’s website. Along with SQLBackupAndFTP setup gives you the option to install “One-Click SQL Restore” (you can install it stand-alone too) – a basic tool for restoring just Full backups. However basic, you can drag-and-drop on it the zip file created by SQLBackupAndFTP, it unzips the BAK file if necessary, connects to the SQL server on the start, selects the right database, it is smart enough to restart the server to drop open connections if necessary – very handy for developers who need to restore databases often. You may ask why is this tool is better than maintenance tasks available in SQL Server? While maintenance tasks are easy to set up, SQLBackupAndFTP is still way easier and integrates solution for compression, encryption, FTP, cloud storage and email which make it superior to maintenance tasks in every aspect. On a flip side SQLBackupAndFTP is not the fanciest tool to manage backups or check their health. It only works reliably on local SQL Server instances. In other words it has to be installed on the SQL server itself. For remote servers it uses scripting which is less reliable. This limitations is actually inherent in SQL server itself as BACKUP DATABASE command  creates backup not on the client, but on the server itself. This tool is compatible with almost all the known SQL Server versions. It works with SQL Server 2008 (all versions) and many of the previous versions. It is especially useful for SQL Server Express 2005 and SQL Server Express 2008, as they lack built in tools for backup. I strongly recommend this tool to all the DBAs. They must absolutely try it as it is free and does exactly what it promises. You can download your free copy of the tool from here. Please share your experience about using this tool. I am eager to receive your feedback regarding this article. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, SQLServer, T SQL, Technology

  Read the article

• Dropped hard drive won't mount

  - by Dave DeLong

  I have a 2 TB HFS+-formatted external hard drive that got dropped a couple of days ago while transferring files onto a Macbook Pro. Now the drive's partitions won't mount. Disk Utility can see the drive, but doesn't recognize that it has any partitions. I've tried using Data Rescue 2 to recover files off of it, but it couldn't find anything. In addition, our local computer repair shop said they couldn't find anything on there either. I know that I could ship the drive off to someone like DriveSavers, but I was hoping for a cheaper option (since they start at about $500 for the attempt). Is there something else I could try on my own? Would TestDisk be able to help with something like this?

  Read the article

• permanently map a network drive osx leopard

  - by kevyn

  I want to have a mapped drive in OSX which points to my NAS - however I've found that I have to do it after every single reboot. I'm a mac noob, so would like to just have the drive mapped at all times like windows does, but instead each time I reboot and forget to map the drive, I accidentally open itunes and find no music as it's all stored on my NAS! is there a simple way of doing this? have I missed something really silly?

  Read the article

• Windows 7 Boot to VHD using a VHD clone of the system drive

  - by daveh551

  This seems like a not too difficult problem, and, after several hurdles, I'm maddeningly close. But I can't quite get there. I'm running Windows 7 in development shop. I want to start using VS2010 to work on some stuff that won't be released for awhile. My boss said no beta code on the production machine, but I could run VS2010 for this project IF I could do it in an isolated environment, like a virtual PC. Well, I've used the beta and RC of Win7 on VPC's before, and it was painfully slow because of the VPC environment. But everyone has been singing the praises of Windows 7's boot-to-VHD capability, where only the disk is virtualized, and you're actually running on the hardware. Supposed to be little slower, but nowhere near the speed penalty of VPC. I've spent a fair amount of time getting everything installed the way I want it. So I figured, I'll just clone my system drive using Disk2VHD, and boot off of that, and then install VS2010 onto that. (I keep most of my user data, including all my projects, in a separate partition, so that wouldn't have to be duplicated and would still be available.) Well, I had some difficulties with that, owing mainly to the fact that I was using an old version of Disk2VHD - (get the latest if you're going to try it.) But I did finally get it to boot. (Scott Hanselman has a good blog post on boot to VHD). But it wasn't exactly what I was expecting or hoping for. What I expected was that the VHD would become the C: drive, and the original (physical) C: drive would be either hidden or mounted under a different letter, and thus isolated and protected from any changes. What you actually get is that the VHD becomes the D: drive AND you boot from the D: drive, BUT your original C: drive is still there. Which is sort of okay EXCEPT that the Registry on the VHD is a clone of the Registry on C: drive, and includes many hard-coded references to C:. So the result is that some things come from (and modify) D: (the VHD), but some things come from (and modify) C:. (If you open a cmd prompt and do a SET to look at your environment variables, you will see a mixture of D:\ and C:\ paths.) So I don't really have an isolated environment. Most importantly, %ProgramFiles% is still set to C:\Program Files. What I really need is a tool that can access the registry files on the mounted VHD AS FILES, not as registry entries, and do a global search and replace on all the C:\ in strings to D:. I haven't found such a program. (I've tried to do it with a program called Registry Replace, but, even when running as Administrator, there are certain entries that the Registry won't let you change.) Does anyone know of one? Or any other solution to my problem (other than starting from scratch with a clean VHD and installing Win7 and all my programs on it.)?

  Read the article

• Cannot run setups from a vboxsvr mapped network drive on Windows within VirtualBox

  - by Dimitri C.

  I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior? Update: After some extended tests I noticed that the problem only occurs with a mapped drive of VirtualBox's "shared folders" (cf. vboxsvr; VirtualBox v3.1.4). Mapping an SMB drive works fine. Update: The same problem occurs on Windows Vista.

  Read the article

• Partitioning External Hard Drive

  - by Srin

  Is there a way to partition a External Hard drive ? I have a WD 500GB external hard drive with USB interface

  Read the article

• Eee PC - Create USB Recovery Drive w/ Files Copied From Recovery Partition

  - by nedm

  I have an Eee PC 1005HAB whose hard disk has failed. I have no recovery CD/DVD, but I did previously back up the contents of the recovery partition, and would like to use them to create a bootable USB to reinstall the factory settings on the new hard drive. Since I simply copied all the files in the recovery partition, rather than hitting F9 during boot and running through the process to create a recovery disk or drive, how do I now use the files to create a bootable USB drive that will do the recovery? In the BIOS I have disabled boot booster and set external drives to the top of the boot priority, but simply copying all the recovery partion files to a usb doesn't allow it to be booted from. I've downloaded the HP utility for creating bootable USB drives and have tried using it to make the USB drive bootable, but I'm not sure what to do with the ghost image and utilities from the recovery partition to get the process to start properly. Thanks in advance for any help.

  Read the article

• Installing Windows XP sp3 into USB 2.0 WD 320Gb Hard Drive

  - by NetKabuki

  I have a HP laptop with support for 3 USB 2.0 ports. I also have a clean 320Gb WD USB 2.0 drive. The HP can boot from USB (Bios options). I used the install disk (XP SP3 bootable) and after a few stutters, was actually able to load up a partition on the 320Gb drive with Windows. I cannot consistently get the system to boot up off the USB drive. I am able to drop Ubuntu on that same WD drive and boot up. I can even get Grub2 on Ubuntu to recognize the Win OS. But booting the Win OS is an impossible task. What can I do differently - if anything?

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• Stop chkdsk when Windows 7 on one drive and Windows 8 on another

  - by markmnl

  I installed Windows 8 (retail) on a new drive with my Windows 7 drive unplugged. So each Windows has no idea about the other one and I use the BIOS boot options to select which drive hence OS to boot into. Now whenever I boot into Windows 8 then boot into Windows 7, Windows 7 runs chkdisk presumably because Windows 8 messed with it. Is there anyway to stop this? (In hindsight I should have installed Windows 8 with Windows 7 drive plugged in so I could use the Windows dual boot options).

  Read the article

• external hard drive is no longer recognized, gives buffer I/O errors

  - by BioGeek

  Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

  Read the article

• Backing up VM data to host drive on Windows 7

  - by malcolms

  Hi, I have created a VM for Virtual PC in windows 7. I am writing a batch file to backup data in the VM to a host USB drive. I have shared the host drives. I have a USB drive that I want to backup to. But how do refer to the USB drive in the batch file. I cannot seem to map a drive to it, It is called "H on Malcolm-Desktop" in windows explorer. This is what I have tried. XCOPY C:\Inetpub\wwwroot "\\H on Malcolm-Desktop\HALII_VHD_Backup\DataBackup\Inetpub\wwwroot" /S /E /Y /D How do I write this command? Malcolm

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• Virtual system drive is split between separate LUNs

  - by Tigran

  My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

  Read the article

• What LTO 4 drive to buy

  - by pplrppl

  Evan Anderson mentioned in another solution you could buy a LTO-4 (autoloader, 1 tape / day) - $4,566.00 (the discussion included total cost of tapes for a specific rotation.) but I don't know specifics on what he or you would recommend for the actual drive and if necessary controller. Show me a newegg URL or CDW, Dell, or HP, or whatever your favorite vendor would be for your solution if you don't mind looking it up or just give me a brand and a model number and I'll be glad to do the leg work myself. I currently have on have on hand an external LTO 3 drive that uses LVD SCSI interface (and thus have a controller card that has an external LVD SCSI connector). If that card isn't sufficient to interface to a LTO 4 drive let me know. http://www.fujifilmusa.com/shared/bin/LTO_Overview.pdf shows minimum tape speeds for LTO4 and other LTO formats. It looks like the IBM LTO4 actually has a lower minimum speed than the IBM LTO3. Either way my average server is too slow to feed LTO3/4 without shoeshining so I'm looking for a drive with a low minimum write speed. If you trust the PDF from 2008 that makes my choices IBM LTO 4 full height IBM LTO 4 half height HP LTO 4 half height but presumably there are other options out there that weren't mentioned in the fuji PDF. Again I'm looking for a specific recommendation on a drive to buy (and the controller if needed).

  Read the article

• How to boot floppy image without floppy drive?

  - by Teddy

  Suppose I have a 1.44 MB floppy image with, say, a BIOS update, and a server with no floppy drive. How do I boot this image on the server? Without getting a USB floppy drive, that is. I tried copying the image to a USB drive (raw copy using dd), but it didn't boot, it just said "No kernel" and contiued booting on the HD.

  Read the article

• Simple copy to pen-drive - 0x80070057

  - by yzraeu

  Hello guys, I have this problem for a while and still didn't find the answer. I'm copying a specifc 10mb file to my pen-drive, from any folder on PC to any folder on the pen-drive and all i get is this: 0x80070057 The parameter is incorrect I simply cannot copy the file at all!! The pen-drive in case is my Nokia 5800, in "Mass Storage" mode. Sometimes I cannot copy a single MP3 file, 5 or 7mb. So i have to disconnect and connect again. The source file is not corrupted, the destination works fine with other files. It's just with some files. If I change to another pen-drive, works fine.

  Read the article

• HP Colour LaserJet Printer Hard Drive

  - by Jon Rhoades

  We are struggling to print Student's Theses on our HP CLJ CP4025 Printers (It will only let us print 1 at a time & typically they need multiple copies). Supposedly the solution is to install the optional Hard Drive. My question is: a) Does a hard drive on the printer make a significant difference? b) Can we use any old hard drive or do we have to use the rather pricey HP High performance EIO units?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >