Search Results

Search found 73679 results on 2948 pages for 'get http client info'.

Page 56/2948 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• Tuxedo 11gR1 Client Server Affinity

  - by todd.little

  One of the major new features in Oracle Tuxedo 11gR1 is the ability to define an affinity between clients and servers. In previous releases of Tuxedo, the only way to ensure that multiple requests from a client went to the same server was to establish a conversation with tpconnect() and then use tpsend() and tprecv(). Although this works it has some drawbacks. First for single-threaded servers, the server is tied up for the entire duration of the conversation and cannot service other clients, an obvious scalability issue. I believe the more significant drawback is that the application programmer has to switch from the simple request/response model provided by tpcall() to the half duplex tpsend() and tprecv() calls used with conversations. Switching between the two typically requires a fair amount of redesign and recoding. The Client Server Affinity feature in Tuxedo 11gR1 allows by way of configuration an application to define affinities that can exist between clients and servers. This is done in the *SERVICES section of the UBBCONFIG file. Using new parameters for services defined in the *SERVICES section, customers can determine when an affinity session is created or deleted, the scope of the affinity, and whether requests can be routed outside the affinity scope. The AFFINITYSCOPE parameter can be MACHINE, GROUP, or SERVER, meaning that while the affinity session is in place, all requests from the client will be routed to the same MACHINE, GROUP, or SERVER. The creation and deletion of affinity is defined by the SESSIONROLE parameter and a service can be defined as either BEGIN, END, or NONE, where BEGIN starts an affinity session, END deletes the affinity session, and NONE does not impact the affinity session. Finally customers can define how strictly they want the affinity scope adhered to using the AFFINITYSTRICT parameter. If set to MANDATORY, all requests made during an affinity session will be routed to a server in the affinity scope. Thus if the affinity scope is SERVER, all subsequent tpcall() requests will be sent to the same server the affinity scope was established with. If the server doesn't offer that service, even though other servers do offer the service, the call will fail with TPNOENT. Setting AFFINITYSTRICT to PRECEDENT tells Tuxedo to try and route the request to a server in the affinity scope, but if that's not possible, then Tuxedo can try to route the request to servers out of scope. All of this begs the question, why? Why have this feature? There many uses for this capability, but the most common is when there is state that is maintained in a server, group of servers, or in a machine and subsequent requests from a client must be routed to where that state is maintained. This might be something as simple as a database cursor maintained by a server on behalf of a client. Alternatively it might be that the server has a connection to an external system and subsequent requests need to go back to the server that has that connection. A more sophisticated case is where a group of servers maintains some sort of cache in shared memory and subsequent requests need to be routed to where the cache is maintained. Although this last case might be able to be handled by data dependent routing, using client server affinity allows the cache to be partitioned dynamically instead of statically.

  Read the article

• Will new Twitter API 1.1 allow hashtag/tweet/trend queries without any authentication, i.e. for a client that does not use an user's account at all?

  - by P5music

  I see that, even not being logged in Twitter with an account, if I google hashtags or twitter accounts, twitter show them. I think it should be also possible to get those tweets programmatically but I do not know it for sure, so I ask for confirmation here, especially for the future with the new Twitter API resctrictions. I mean, will it be possible to get tweets from hashtags or accounts without logging in an user account, and so not wanting to access the user settings, subscriptions, etc (because I do not need it), thus not having to respect any token limit? I found these API 1.1 faqs, have I to be concerned? Will an application have to request user authorization just to make public API calls? When API v1.1 is released, user authorization (and access tokens) are required for all API 1.1 requests. In the weeks following release, some methods will require only application-based authentication for certain "userless" contexts. Will an application have to request user authorization just to make public API calls? When API v1.1 is released, user authorization (and access tokens) are required for all API 1.1 requests. In the weeks following release, some methods will require only application-based authentication for certain "userless" contexts. Will the Search API require authentication? The Search API is now part of the official REST API in version 1.1. In addition to serving results in a format consistent with other Tweet resources, usage will also require authentication.

  Read the article

• Display image from database with p:graphicImage

  - by minhltnt

  I'm trying to display image type byte which saved in database to return StreamedContent to the p:graphicImage, as follows: private StreamedContent content; // getter and setter public StreamedContent getImageF() { if (student.getImage() != null) { InputStream is = new ByteArrayInputStream(student.getImage()); System.out.println("Byte :"+student.getImage()); content = new DefaultStreamedContent(is, "", student.getStuID()); System.out.println("ddd ------------------------------- " + content); return content; } return content; } This return blank image. Can Someone explain why? <p:graphicImage value="#{item.imageF}" width="50" id="grpImage" height="80"/> When i try to print the ouput : INFO: Byte :[B@a2fb48 INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@b0887b INFO: Byte :[B@a2fb48 INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@1d06a92 INFO: Byte :[B@d52f0b INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@39a60 INFO: Byte :[B@d52f0b INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@8c3daa INFO: Byte :[B@124728a INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@1dbe05b INFO: Byte :[B@124728a INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@66a266 INFO: Byte :[B@a2fb48 INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@1293976 INFO: Byte :[B@a2fb48 INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@17b7399 INFO: Byte :[B@d52f0b INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@1e245a5 INFO: Byte :[B@d52f0b INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@4a7153 INFO: Byte :[B@124728a INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@1561bfd INFO: Byte :[B@124728a INFO: ddd ------------------------------- org.primefaces.model.DefaultStreamedContent@47a8c2<br/> I don't know the reason why p:grpalicImage return blank.Help me,please

  Read the article

• Hibernate + PostgreSQL : relation does not exist - SQL Error: 0, SQLState: 42P01

  - by tommy599

  Hello, I am having some problems trying to work with PostgreSQL and Hibernate, more specifically, the issue mentioned in the title. I've been searching the net for a few hours now but none of the found solutions worked for me. I am using Eclipse Java EE IDE for Web Developers. Build id: 20090920-1017 with HibernateTools, Hibernate 3, PostgreSQL 8.4.3 on Ubuntu 9.10. Here are the relevant files: Message.class package hello; public class Message { private Long id; private String text; public Message() { } public Long getId() { return id; } public void setId(Long id) { this.id = id; } public String getText() { return text; } public void setText(String text) { this.text = text; } } Message.hbm.xml <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd"> <hibernate-mapping package="hello"> <class name="Message" table="public.messages"> <id name="id" column="id"> <generator class="assigned"/> </id> <property name="text" column="messagetext"/> </class> </hibernate-mapping> hibernate.cfg.xml <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <property name="hibernate.connection.driver_class">org.postgresql.Driver</property> <property name="hibernate.connection.password">bar</property> <property name="hibernate.connection.url">jdbc:postgresql:postgres/tommy</property> <property name="hibernate.connection.username">foo</property> <property name="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</property> <property name="show_sql">true</property> <property name="log4j.logger.org.hibernate.type">DEBUG</property> <mapping resource="hello/Message.hbm.xml"/> </session-factory> </hibernate-configuration> Main package hello; import org.hibernate.Session; import org.hibernate.SessionFactory; import org.hibernate.Transaction; import org.hibernate.cfg.Configuration; public class App { public static void main(String[] args) { SessionFactory sessionFactory = new Configuration().configure() .buildSessionFactory(); Message message = new Message(); message.setText("Hello Cruel World"); message.setId(2L); Session session = null; Transaction transaction = null; try { session = sessionFactory.openSession(); transaction = session.beginTransaction(); session.save(message); } catch (Exception e) { System.out.println("Exception attemtping to Add message: " + e.getMessage()); } finally { if (session != null && session.isOpen()) { if (transaction != null) transaction.commit(); session.flush(); session.close(); } } } } Table structure: foo=# \d messages Table "public.messages" Column | Type | Modifiers -------------+---------+----------- id | integer | messagetext | text | Eclipse console output when I run it Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Environment <clinit> INFO: Hibernate 3.5.1-Final Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Environment <clinit> INFO: hibernate.properties not found Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Environment buildBytecodeProvider INFO: Bytecode provider name : javassist Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Environment <clinit> INFO: using JDK 1.4 java.sql.Timestamp handling Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Configuration configure INFO: configuring from resource: /hibernate.cfg.xml Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Configuration getConfigurationInputStream INFO: Configuration resource: /hibernate.cfg.xml Apr 28, 2010 11:13:53 PM org.hibernate.cfg.Configuration addResource INFO: Reading mappings from resource : hello/Message.hbm.xml Apr 28, 2010 11:13:54 PM org.hibernate.cfg.HbmBinder bindRootPersistentClassCommonValues INFO: Mapping class: hello.Message -> public.messages Apr 28, 2010 11:13:54 PM org.hibernate.cfg.Configuration doConfigure INFO: Configured SessionFactory: null Apr 28, 2010 11:13:54 PM org.hibernate.connection.DriverManagerConnectionProvider configure INFO: Using Hibernate built-in connection pool (not for production use!) Apr 28, 2010 11:13:54 PM org.hibernate.connection.DriverManagerConnectionProvider configure INFO: Hibernate connection pool size: 20 Apr 28, 2010 11:13:54 PM org.hibernate.connection.DriverManagerConnectionProvider configure INFO: autocommit mode: false Apr 28, 2010 11:13:54 PM org.hibernate.connection.DriverManagerConnectionProvider configure INFO: using driver: org.postgresql.Driver at URL: jdbc:postgresql:postgres/tommy Apr 28, 2010 11:13:54 PM org.hibernate.connection.DriverManagerConnectionProvider configure INFO: connection properties: {user=foo, password=****} Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: RDBMS: PostgreSQL, version: 8.4.3 Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: JDBC driver: PostgreSQL Native Driver, version: PostgreSQL 8.4 JDBC4 (build 701) Apr 28, 2010 11:13:54 PM org.hibernate.dialect.Dialect <init> INFO: Using dialect: org.hibernate.dialect.PostgreSQLDialect Apr 28, 2010 11:13:54 PM org.hibernate.engine.jdbc.JdbcSupportLoader useContextualLobCreation INFO: Disabling contextual LOB creation as createClob() method threw error : java.lang.reflect.InvocationTargetException Apr 28, 2010 11:13:54 PM org.hibernate.transaction.TransactionFactoryFactory buildTransactionFactory INFO: Using default transaction strategy (direct JDBC transactions) Apr 28, 2010 11:13:54 PM org.hibernate.transaction.TransactionManagerLookupFactory getTransactionManagerLookup INFO: No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Automatic flush during beforeCompletion(): disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Automatic session close at end of transaction: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: JDBC batch size: 15 Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: JDBC batch updates for versioned data: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Scrollable result sets: enabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: JDBC3 getGeneratedKeys(): enabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Connection release mode: auto Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Default batch fetch size: 1 Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Generate SQL with comments: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Order SQL updates by primary key: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Order SQL inserts for batching: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory createQueryTranslatorFactory INFO: Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory Apr 28, 2010 11:13:54 PM org.hibernate.hql.ast.ASTQueryTranslatorFactory <init> INFO: Using ASTQueryTranslatorFactory Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Query language substitutions: {} Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: JPA-QL strict compliance: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Second-level cache: enabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Query cache: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory createRegionFactory INFO: Cache region factory : org.hibernate.cache.impl.NoCachingRegionFactory Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Optimize cache for minimal puts: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Structured second-level cache entries: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Echoing all SQL to stdout Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Statistics: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Deleted entity synthetic identifier rollback: disabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Default entity-mode: pojo Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Named query checking : enabled Apr 28, 2010 11:13:54 PM org.hibernate.cfg.SettingsFactory buildSettings INFO: Check Nullability in Core (should be disabled when Bean Validation is on): enabled Apr 28, 2010 11:13:54 PM org.hibernate.impl.SessionFactoryImpl <init> INFO: building session factory Apr 28, 2010 11:13:55 PM org.hibernate.impl.SessionFactoryObjectFactory addInstance INFO: Not binding factory to JNDI, no JNDI name configured Hibernate: insert into public.messages (messagetext, id) values (?, ?) Apr 28, 2010 11:13:55 PM org.hibernate.util.JDBCExceptionReporter logExceptions WARNING: SQL Error: 0, SQLState: 42P01 Apr 28, 2010 11:13:55 PM org.hibernate.util.JDBCExceptionReporter logExceptions SEVERE: Batch entry 0 insert into public.messages (messagetext, id) values ('Hello Cruel World', '2') was aborted. Call getNextException to see the cause. Apr 28, 2010 11:13:55 PM org.hibernate.util.JDBCExceptionReporter logExceptions WARNING: SQL Error: 0, SQLState: 42P01 Apr 28, 2010 11:13:55 PM org.hibernate.util.JDBCExceptionReporter logExceptions SEVERE: ERROR: relation "public.messages" does not exist Position: 13 Apr 28, 2010 11:13:55 PM org.hibernate.event.def.AbstractFlushingEventListener performExecutions SEVERE: Could not synchronize database state with session org.hibernate.exception.SQLGrammarException: Could not execute JDBC batch update at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:92) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:275) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:263) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:179) at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:321) at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:51) at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1206) at org.hibernate.impl.SessionImpl.managedFlush(SessionImpl.java:375) at org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:137) at hello.App.main(App.java:31) Caused by: java.sql.BatchUpdateException: Batch entry 0 insert into public.messages (messagetext, id) values ('Hello Cruel World', '2') was aborted. Call getNextException to see the cause. at org.postgresql.jdbc2.AbstractJdbc2Statement$BatchResultHandler.handleError(AbstractJdbc2Statement.java:2569) at org.postgresql.core.v3.QueryExecutorImpl$1.handleError(QueryExecutorImpl.java:459) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1796) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:407) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeBatch(AbstractJdbc2Statement.java:2708) at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:70) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:268) ... 8 more Exception in thread "main" org.hibernate.exception.SQLGrammarException: Could not execute JDBC batch update at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:92) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:275) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:263) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:179) at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:321) at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:51) at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1206) at org.hibernate.impl.SessionImpl.managedFlush(SessionImpl.java:375) at org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:137) at hello.App.main(App.java:31) Caused by: java.sql.BatchUpdateException: Batch entry 0 insert into public.messages (messagetext, id) values ('Hello Cruel World', '2') was aborted. Call getNextException to see the cause. at org.postgresql.jdbc2.AbstractJdbc2Statement$BatchResultHandler.handleError(AbstractJdbc2Statement.java:2569) at org.postgresql.core.v3.QueryExecutorImpl$1.handleError(QueryExecutorImpl.java:459) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1796) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:407) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeBatch(AbstractJdbc2Statement.java:2708) at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:70) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:268) ... 8 more PostgreSQL log file 2010-04-28 23:13:55 EEST LOG: execute S_1: BEGIN 2010-04-28 23:13:55 EEST ERROR: relation "public.messages" does not exist at character 13 2010-04-28 23:13:55 EEST STATEMENT: insert into public.messages (messagetext, id) values ($1, $2) 2010-04-28 23:13:55 EEST LOG: unexpected EOF on client connection If I copy/paste the query into the postgre command line and put the values in and ; after it, it works. Everything is lowercase, so I don't think that it's that issue. If I switch to MySQL, the same code same project (I only change driver,URL, authentication), it works. In Eclipse Datasource Explorer, I can ping the DB and it succeeds. Weird thing is that I can't see the tables from there either. It expands the public schema but it doesn't expand the tables. Could it be some permission issue? Thanks!

  Read the article

• Syncing client and server CRUD operations using json and php

  - by Justin

  I'm working on some code to sync the state of models between client (being a javascript application) and server. Often I end up writing redundant code to track the client and server objects so I can map the client supplied data to the server models. Below is some code I am thinking about implementing to help. What I don't like about the below code is that this method won't handle nested relationships very well, I would have to create multiple object trackers. One work around is for each server model after creating or loading, simply do $model->clientId = $clientId; IMO this is a nasty hack and I want to avoid it. Adding a setCientId method to all my model object would be another way to make it less hacky, but this seems like overkill to me. Really clientIds are only good for inserting/updating data in some scenarios. I could go with a decorator pattern but auto generating a proxy class seems a bit involved. I could use a generic proxy class that uses a __call function to allow for original object data to be accessed, but this seems wrong too. Any thoughts or comments? $clientData = '[{name: "Bob", action: "update", id: 1, clientId: 200}, {name:"Susan", action:"create", clientId: 131} ]'; $jsonObjs = json_decode($clientData); $objectTracker = new ObjectTracker(); $objectTracker->trackClientObjs($jsonObjs); $query = $this->em->createQuery("SELECT x FROM Application_Model_User x WHERE x.id IN (:ids)"); $query->setParameters("ids",$objectTracker->getClientSpecifiedServerIds()); $models = $query->getResults(); //Apply client data to server model foreach ($models as $model) { $clientModel = $objectTracker->getClientJsonObj($model->getId()); ... } //Create new models and persist foreach($objectTracker->getNewClientObjs() as $newClientObj) { $model = new Application_Model_User(); .... $em->persist($model); $objectTracker->trackServerObj($model); } $em->flush(); $resourceResponse = $objectTracker->createResourceResponse(); //Id mappings will be an associtave array representing server id resources with client side // id. //This method Dosen't seem to flexible if we want to return additional data with each resource... //Would have to modify the returned data structure, seems like tight coupling... //Ex return value: //[{clientId: 200, id:1} , {clientId: 131, id: 33}];

  Read the article

• How to bridge Debian guest VM to VPN via Cisco AnyConnect Client running on Windows Vista host

  - by bgoodr

  I am running Cisco Anyconnect VPN Client version 2.5.3054 on a laptop running Windows Vista Home Premium (version 6.0.6002) Service Pack 2. I am running the VMware Player version 4.0.2 build-591240. The host operating system running under VMware Player is Debian 6.0.2.1 i386. The laptop is connected to a wireless connection, and I can browse the web from Windows Vista using Firefox just fine. I am able to boot into the Debian VM and open up a browser and access websites on the WAN from within the VM just fine. I can ping real Linux hosts on my LAN via: ping <lan_system>.local where <lan_system> is the hostname returned from uname -a on that system on my LAN. From a DOS CMD shell, I am able to ping hosts that exist on the remote network served by the Cisco AnyConnect Client's VPN network (and without the .local suffix applied as above): ping <remote_system> However, from within the Debian VM, I expect to be able to also ping those same remote hosts (<remote_system>) that are tunnelled over the VPN set up by Cisco AnyConnect Client. Let's say that I can ping a <remote_system> called flubber from a DOS CMD prompt just fine. When I execute Linux ping command from inside the Debian VM via: ping flubber It returns immediately with this output: ping: unknown host flubber For reference since I suspect it will be useful, here is the output of the route print command from the DOS CMD prompt: route print =========================================================================== Interface List 30 ...00 05 9a 3c 7a 00 ...... Cisco AnyConnect VPN Virtual Miniport Adapter for Windows 11 ...00 1b 9e c4 de e5 ...... Atheros AR5007EG Wireless Network Adapter 26 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 28 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 1 ........................... Software Loopback Interface 1 12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 13 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 32 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 27 ...00 00 00 00 00 00 00 e0 isatap.{E5292CF6-4FBB-4320-806D-A6B366769255} 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 20 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8 22 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #10 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #11 25 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #12 29 ...00 00 00 00 00 00 00 e0 isatap.{C3852986-5053-4E2E-BE60-52EA2FCF5899} 41 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #14 =========================================================================== At the top window border of the VM, clicking on Virtual Machine, then clicking on Virtual Machine Settings, then clicking on Network Adapter, I have these two options checked: [X] Bridged: Connected directly to the physical Network [X] Replicate physical network connection state [ ] NAT: used to share the hosts's IP address [ ] Host-only: A private network shared with the host [ ] LAN segment: [ ] <LAN Segments...> <Advanced> I've toyed with the other options such as NAT and Host-only but that had no effect. Is there some way to allow the VM to access those <remote_system>'s?

  Read the article

• PC hangs and reboots from time to time

  - by Bevor

  Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

  Read the article

• How to Collect Debug Info for Oracle SQL Developer

  - by thatjeffsmith

  In a perfect world, there would be no software bugs. Developers would always test their code. QA would find any scenarios and bugs the developers hadn’t already thought of. Regression tests would be complete and flawless. But alas, we can only afford to pay mere humans here, so we will have bugs from time to time. Or sometimes you are trying to do something the software wasn’t designed for, or perhaps your machine has exhausted it’s resources trying to build the un-buildable. When you run into problems, you will need help. Developers need your help so they can help you. Surprisingly enough, feedback like this isn’t very helpful: Your program isn’t working. How can I make it work? When you are ready to work with us on the SQL Developer OTN forum, you will most likely be asked to run SQL Developer and capture the output from the command console. In case you need help with this, ere’s a step-by-step process you can follow in Windows 7 (should work in XP too.) Open a windows command window Start – Run – CMD Once it’s open, click on the window icon and select ‘Defaults.’ Change the default buffer size to be something bigger, much bigger. Set the CMD window default buffer size HIGHER Note: you only need to do this once. Navigate to your SQL Developer Installation Folder Instead of running the ‘sqldeveloper.exe’ file in the root directory, we are going to go several sub-directories down. Find the ‘bin’ sub-directory and run the ‘sqldeveloper.exe’ there. When you do this, a CMD window will open, and then you’ll see the SQL Developer application load. The SQL Developer bin directory - run the tool from here and get a logging window Use SQL Developer as normal, until it ‘breaks’ or ‘hangs’ Now, you are ready to grab the nitty-gritty information that MIGHT tell the developer what is going wrong or happening in your scenario. Click back into the CMD window Send a Ctrl+Break or a Ctrl+Pause. If you on a newer laptop that doesn’t have this key, be sure to check the ‘Fn’ subset of keys. If you need to map the BREAK or PAUSE buttons, this article might help. You can also try the on-screen keyboard in windows – just type ‘OSK’ in your START – RUN prompt. Copy the logging information from the command window – all of it We need this information, help us get it! Open a case with Oracle Support or Start a Thread on the Forums Or email me. If you’re on my blog reading this, it’s the least I can do to help Now, before you hit ‘Send’ or ‘Post’ or ‘Submit’ – be sure to add a brief description of what you were doing in the application when you ran into the problem. Even if you were doing ‘nothing,’ let us know how many connections you had open, what windows were active, etc. The more you can tell us, the higher your odds go up to getting a quick fix or at least an answer as to what is happening. Also include the following information: The version of SQL Developer you are running The version of the JDK you are using The OS you are using The version of Oracle you are connected to Now, don’t be surprised if you get asked to upgrade to a supported configuration, say ‘version 3.1 and the 1.6 JDK.’ Supporting older versions of software is fun, and while we enjoy a challenge, it may be easier for you to upgrade your way out of the problem at hand.

  Read the article

• SharePoint MOSS - Serve HTTP content on an HTTPS page without Mixed Content Warning?

  - by kcb263

  Our "portal-like" SharePoint site is served using HTTPS/SSL. So a user goes to https://web.company.com and sees content and different Web Parts. So far, no problem. The desire now is to have new Web Parts added that either frame HTTP content (such as Weather Bug) or HTTP RSS feeds. The issue that arises is that by doing this, results in a "Mixed Content" warning in the browser. Has anybody successfully been able to implement such a scenario, or one similar to it? The options we have looked at, unsuccessfully, have been: using Apache Reverse Proxy Server mirror an external site Custom Web Parts

  Read the article

• How does a web server/the http protocol handle version control and compression?

  - by Sune Rasmussen

  When a client browser requests a file from the web server, I know that some kind of check is performed, because the files needed to serve the web page may already be cached by the web browser. So, if a file exists in the cache, no files are sent. But if the file on the server has changed since the file was cached in the browser, the file is sent and updated anyhow. Then, if you have compression like gzipping enabled on the server, the files that are to be provided to the client must be gzipped on the way, requiring some amount of server side processing. But how is this managed? The logical approach seems to me, that the web server should have a cache as well, containing the newest version of all files that have been requested within a certain time span, thus a compressed version of these files, so that compression would not have to be done each time a files is requested. And also, how are files eventually requested? Does the browser ask for files, each time it encounters one in the HTML code and the specific file is not stored in the local cache, or does it sum all the files that are needed up and ask for the whole bunch at the same time? But that's only guessing from a programming point of view, and I don't really know. If the answers are very different among web server systems, I'm primarily interested in Apache, but other answers are appreciated, too.

  Read the article

• Glassfish V3 won't start

  - by Zakaria

  Hi everybody, I installed NetBeans 6.8 and tried to run the GlasshFish V3 server. I'm working under Windows Vista 32 Bits. First, it won't run. Then I modified the c:\Windows\System32\drivers\etc\hosts file and put the following line into it: 127.0.0.1 localhost And when I run the GlasshFish V3 Server, no error is showing but only "INFOs" are displayed: 3 avr. 2010 19:23:19 com.sun.enterprise.glassfish.bootstrap.ASMain main INFO: Launching GlassFish on Felix platform Welcome to Felix ================ INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:24 CEST 2010 INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:25 CEST 2010 INFO: Grizzly Framework 1.9.18-k started in: 423ms listening on port 35127 INFO: GlassFish v3 (74.2) startup time : Felix(4456ms) startup services(1709ms) total(6165ms) INFO: Grizzly Framework 1.9.18-k started in: 459ms listening on port 35116 INFO: Grizzly Framework 1.9.18-k started in: 428ms listening on port 35155 INFO: Grizzly Framework 1.9.18-k started in: 470ms listening on port 35160 INFO: Grizzly Framework 1.9.18-k started in: 513ms listening on port 35159 INFO: javassist.util.proxy.ProxyFactory.classLoaderProvider = org.glassfish.weld.WeldActivator$GlassFishClassLoaderProvider@5be8f4 INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 INFO: Binding RMI port to *:35165 INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. INFO: JMXStartupService: Started JMXConnector, JMXService URL = service:jmx:rmi://PC-de-Charlotte:35165/jndi/rmi://PC-de-Charlotte:35165/jmxrmi INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate INFO: [Thread[GlassFish Kernel Main Thread,5,main]] started INFO: Grizzly Framework 1.9.18-k started in: 150ms listening on port 35159 INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Program Files\sges-v3\glassfish\modules\autostart, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-330907148519261411, felix.fileinstall.filter = null} INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-2938963288421854459, felix.fileinstall.filter = null} INFO: Grizzly Framework 1.9.18-k started in: 95ms listening on port 35160 INFO: Updating configuration from org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: Installed C:\Program Files\sges-v3\glassfish\modules\autostart\org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-6474085409014899009, felix.fileinstall.filter = null} And there is no message such as "Glassfish started"! So, when I try to access to the admin web interface: localhost:4848 or localhost:8080 or localhost:8181 , It doesn't work. What should I do? Thank you very much, Regards.

  Read the article

• Windows Server 2003 R2 SP2 GPO Conditional Terminal Services Client Redirection

  - by caleban

  We have a lot of mobile/home users with different client side printers attached. Most of these users don't need to print on the client side and we don't want all of these users Terminal Services sessions trying to map their client side printers and we don't want all of these drivers on the Terminal Server. What is the best way to set up around 90 users to have no client side printer redirection and 10 users to have client side printer redirection (to the printers attached to their home computers)? Do I need to create two separate OU's in AD one for redirection and one for no redirection and create two different policies one for each OU? One GPO with Client Server data redirection Do not allow client printer redirection disabled and one enabled? Is it preferrable instead to change each user's AD User Properties Enviroment Client devices Connect client printers at logon setting? Is there any for me to direct "ALL HP Printers" to a single HP Universal Printer Driver, "ALL Canon Printers" to a single Canon Universal Printer Driver, etc without specifying hundreds of unique printer names in the printsub.inf file? Thanks in advance.

  Read the article

• wcf http 504: Working on a mystery

  - by James Fleming

  Ok,  So you're here because you've been trying to solve the mystery of why you're getting a 504 error. If you've made it to this lonely corner of the Internet, then the advice you're getting from other bloggers isn't the answer you are after. It wasn't the answer I needed either, so once I did solve my problem, I thought I'd share the answer with you. For starters, if by some miracle, you landed here first you may not already know that the 504 error is NOT coming from IIS or Casini, that response code is coming from Fiddler. HTTP/1.1 504 Fiddler - Receive Failure Content-Type: text/html Connection: close Timestamp: 09:43:05.193 ReadResponse() failed: The server did not return a response for this request.       The take away here is Fiddler won't help you with the diagnosis and any further digging in that direction is a red herring. Assuming you've dug around a bit, you may have arrived at posts which suggest you may be getting the error because you're trying to hump too much data over the wire, and have an urgent need to employ an anti-pattern: due to a special case: http://delphimike.blogspot.com/2010/01/error-504-in-wcfnet-35.html Or perhaps you're experiencing wonky behavior using WCF-CustomIsolated Adapter on Windows Server 2008 64bit environment, in which case the rather fly MVP Dwight Goins' advice is what you need. http://dgoins.wordpress.com/2009/12/18/64bit-wcf-custom-isolated-%E2%80%93-rest-%E2%80%93-%E2%80%9C504%E2%80%9D-response/ For me, none of that was helpful. I could perform a get on a single record  http://localhost:8783/Criterion/Skip(0)/Take(1) but I couldn't get more than one record in my collection as in:  http://localhost:8783/Criterion/Skip(0)/Take(2) I didn't have a big payload, or a large number of objects (as you can see by the size of one record below) - - A-1B f5abd850-ec52-401a-8bac-bcea22c74138 .biological/legal mother This item refers to the supervisor’s evaluation of the caseworker’s ability to involve the biological/legal mother in the permanency planning process. 75d8ecb7-91df-475f-aa17-26367aeb8b21 false true Admin account 2010-01-06T17:58:24.88 1.20 764a2333-f445-4793-b54d-1c3084116daa So while I was able to retrieve one record without a hitch (thus the record above) I wasn't able to return multiple records. I confirmed I could get each record individually, (Skip(1)/Take(1))so it stood to reason the problem wasn't with the data at all, so I suspected a serialization error. The first step to resolving this was to enable WCF Tracing. Instructions on how to set it up are here: http://msdn.microsoft.com/en-us/library/ms733025.aspx. The tracing log led me to the solution. The use of type 'Application.Survey.Model.Criterion' as a get-only collection is not supported with NetDataContractSerializer.  Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property. So I was wrong (but close!). The problem was a deserializing issue in trying to recreate my read only collection. http://msdn.microsoft.com/en-us/library/aa347850.aspx#Y1455 So looking at my underlying model, I saw I did have a read only collection. Adding a setter was all it took.         public virtual ICollection<string> GoverningResponses         {             get             {                 if (!string.IsNullOrEmpty(GoverningResponse))                 {                     return GoverningResponse.Split(';');                 }                 else                     return null;             }                  } Hope this helps. If it does, post a comment.

  Read the article

• Google+ Platform Office Hours for March 21, 2012: JavaScript and the REST APIs

  Google+ Platform Office Hours for March 21, 2012: JavaScript and the REST APIs It's a blast from the past. Here's the video from our office hours held on the 20th of March. In this session Jonathan and Wolff guided you through using the REST APIs with JavaScript. Get the source code: goo.gl Discuss this video on Google+: goo.gl 1:05 - How to use JSONP to access the REST APIs in JavaScript 2:30 - Setting up a new project in the API console 7:06 - The client libraries, what are they? 8:39 - Using the JavaScript client library to reimplement our example 13:27 - About OAuth and private resources 14:26 - Creating an OAuth client using the API console - The JavaScript client library discussion group - goo.gl 24:14 - Using the JavaScript client library and REST APIs from within a hangout - hangoutbots.blogspot.com Q&A 19 - Are you planning to change the +1 button back? 20:14 - Will this video be posted to YouTube? (Spoiler: the answer is yes) 20:43 - Do you read your issues list? - The Google+ platform issue tracker: goo.gl From: GoogleDevelopers Views: 2808 33 ratings Time: 27:03 More in Science & Technology

  Read the article

• Suggestions for html tag info required for jQuery Plugin

  - by Toby Allen

  I have written a tiny bit of jQuery which simply selects all the Select form elements on the page and sets the selected property to the correct value. Previously I had to write code to generate the Select in php and specify the Selected attribute for the option that was selected or do loads of if statements in my php page or smarty template. Obviosly the information about what option is selected still needs to be specified somewhere in the page so the jQuery code can select it. I decided to create a new attribute on the Select item <Select name="MySelect" SelectedOption="2"> <-- Custom Attr SelectedOption <option value="1">My Option 1 </option> <option value="2">My Option 2 </option> <-- this option will be selected when jquery code runs <option value="3">My Option 3 </option> <option value="4">My Option 4 </option> </Select> Does anyone see a problem with using a custom attribute to do this, is there a more accepted way, or a better jquery way?

  Read the article

• Setting up Linux VPN Client on Mint: Never sends "Set-Link-Info" packet

  - by cabanaboy

  I have tried to set up a VPN Connection on the Linux Mint disto, but could not get it working. When I use a Windows 7 VPN client it works fine. I brought up Wireshark on both Windows and Linux machine and noticed that on the Windows machine, the client never attempted to send the "Set-Link-Info" packet whereas the Windows (working) VPN client did. Why isn't the Linux Mint client sending the "Set-Link-Info" packet. I think if it did that, then my connection would work. What am I missing?

  Read the article

• Scrubbing a DotNetNuke Database for user info and passwords

  - by Chris Hammond

  If you’ve ever needed to send a backup of your DotNetNuke database to a developer for testing, you likely trust the developer enough to do so without scrubbing your data, but just to be safe it is probably best that you do take the time to scrub. Before you do anything with the SQL below, make sure you have a backup of your website! I would recommend you do the following. Backup your existing production database Restore a backup of your production database as a NEW database Run the scripts below...(read more)

  Read the article

• How can I enable http auth in lighttpd for all directories except one?

  - by Nuri Hodges

  I am trying to authenticate access to everything in webroot (/) except anything that resides in a particular directory (/directory/) and I've tried both of these options to no avail: $HTTP["url"] =~ "^(?!(/directory))" { auth.require = ( "" => ( "method" => "basic", "realm" => "auth to this area", "require" => "user=username" ) ) } $HTTP["url"] != "/directory" { auth.require = ( "" => ( "method" => "basic", "realm" => "auth to this area", "require" => "user=username" ) ) }

  Read the article

• How to configure SoapUI with client certificate authentication

  - by gvdmaaden

  SoapUI is one of the best free tools around to test web services. Some time ago I was trying to send a soap message towards a SSL web service that was set up for client certificate authentication. I pretty soon got stuck at the “javax.net.ssl.SSLException: HelloRequest followed by an unexpected handshake message” error, but after reading several posts on the internet I solved that issue. It’s not really that complicated after all, but since I could not find a decent place on the internet that explains this scenario in a proper way, here’s a list of steps that you need to do to make it work. Note: this following steps are based on a Windows environment   Step one: Export your certificate (the one that you want to use as the client certificate) using the export wizard with the private key and with all certificates in the certification path: Give it a password (anything you want): And export it as a PFX file to a location somewhere on disk: Step two: Install the newest version of SOAP UI (currently it is 3.6.1) Open the file C:\Program Files\eviware\soapUI-3.6.1\bin\ soapUI-3.6.1.vmoptions and add this line at the bottom: -Dsun.security.ssl.allowUnsafeRenegotiation=true This is needed because of a JAVA security feature in their newest frameworks (For further reading about this issue, read this: http://www.soapui.org/forum/viewtopic.php?t=4089 and this: http://java.sun.com/javase/javaseforbusiness/docs/TLSReadme.html).   Open SOAPUI and go to preferences>SSL Settings and configure your certificate in the keystore (use the same password as in step one): That should be it. Just create a new project and import the WSDL from the client authenticated SSL webservice: And now you should be able to send soap messages with client certificate authentication. The above steps worked for me, but please drop a note if it does not work for you.

  Read the article

• Oracle Communications Service Broker is now available at http://edelivery.oracle.com/EPD/Download/ge

  - by francois.deza

  Oracle Communications Service Broker is now available at http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=12359008 and documented at http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=12359013 See also white paper "Transforming Service Delivery with Oracle Service Brokering" at http://www.oracle.com/us/products/servers-storage/servers/netra-carrier-grade/060194.pdf

  Read the article

• Can OpenVPN invoke DHCP Client?

  - by Ency

  I have got working VPN connection through openvpn, but I would like to use also my DHCP server and not openvpn's push feature. Currently everything works fine, but I have to manually start dhcp client, eg. dhclient tap0 and I get IP and other important stuff from my DHCP, is there any directive which start DHCP Client when connection is established? There is my client's config: remote there.is.server.com float dev tap tls-client #pull port 1194 proto tcp-client persist-tun dev tap0 #ifconfig 192.168.69.201 255.255.255.0 #route-up "dhclient tap0" #dhcp-renew ifconfig 0.0.0.0 255.255.255.0 ifconfig-noexec ifconfig-nowarn ca /etc/openvpn/ca.crt cert /etc/openvpn/encyNtb_openvpn_client.crt key /etc/openvpn/encyNtb_openvpn_client.key dh /etc/openvpn/dh-openvpn.dh ping 10 ping-restart 120 comp-lzo verb 5 log-append /var/log/openvpn.log Here comes server's config: mode server tls-server dev tap0 local servers.ip.here port 1194 proto tcp-server server-bridge # Allow comunication between clients client-to-client # Allowing duplicate users per one certificate duplicate-cn # CA Certificate, VPN Server Certificate, key, DH and Revocation list ca /etc/ssl/CA/certs/ca.crt cert /etc/ssl/CA/certs/openvpn_server.crt key /etc/ssl/CA/private/openvpn_server.key dh /etc/ssl/CA/dh/dh-openvpn.dh crl-verify /etc/ssl/CA/crl.pem # When no response is recieved within 120seconds, client is disconected keepalive 10 60 persist-tun persist-key user openvpn group openvpn # Log and Connected clients file log-append /var/log/openvpn verb 3 status /var/run/openvpn/vpn.status 10 # Compression comp-lzo #Push data to client push "route-gateway 192.168.69.1" push "redirect-gateway def1"

  Read the article

• sell ccv good and fresh sell cvv all country fullz info

  - by underworld

  ICQ: 640240418 YH: underworld_cvv Mail: [email protected] WELCOME TO MY UNDERWORLD ! I'm is Professional seller,more than 5 years experience,i started work in 2008,i have sold cvv credit card to many customers all over the world. Selling cvv, fullz many country as: Canada,USA,Australia,UK...all And many country in Europe: Fr,Ger,Spain,Ita... I hope we will work together for a long time. Always sell cvv quality with high balance. I have a website but if you want buy cvv good price please contact me. Have Cvv with Bin or Cvv with DOB,VBV if customer claim. List Price Some Cvv (good price for good buyer) -Us: 5$ /1 -Us VBV-DOB : 8$ /1 -Us fullz : 40$ /1 -Us (amex,discover) : 8$ /1 -Ca : 10$ /1 -Ca DOB : 20$ /1 -Ca fullz : 50$ /1 -Ca with bin : 15$ /1 -Au : 10$ /1 -Au DOB : 20$ /1 -Uk : 10$ /1 -Uk DOB-VBV : 20$ /1 -Fr : 15$ /1 -Fr DOB-VBV : 25$ /1 -Ger : 18$ /1 -Ger with DOB : 25$ /1 -Spain : 15$ /1 -Spain Fullz : 40$ /1 -Ita : 15$ /1 -Ita with DOB : 25$ /1 -Japan : 15$ /1 -Japan with DOB : 25$ /1 Cvv random country -Denmark : 25$ /1 -Sweden : 20$ /1 -Switzerland : 20$ /1 -Slovakia : 20$ /1 -Netherlands : 18$ /1 -Mexico : 15 /1 -Middle East : 18$ /1 -New zeland : 18$ /1 -Asia : 15$ /1 -Ireland : 18$ /1 -Belgium : 15$ /1 -Taiwan : 15$ /1 -UAE : 20$ /1 And many country... Some Bins -Us bins: 517805,488893,492536,408181,542432,482880,374355,374372... -Ca bins: 450003,450008,451242,450060,549198,533833,519123,544612... -Uk bins: 4547,5506,5569,5404,5031,4921,5505,5506,4921,4550... -Ger bins: 492942,490762,530127... -Au bins: 543568,450605,494053,450606,456475,521893,519163... -Fr bins: 497847,497831,497841,497849,497820,497825,497833... -And others bins for others country... Format France fullz Nom : di murro Prenom : mariano Adresse : rue des caillettes Ville : Corbeil Essonnes Code Postale : 91100 Telephone : 33672492372 ========== (2eme Tape) ========== Nom de Bank : crédit agricole Nom de Carte Bancaire : di murro mariano Date de naissance : 12 / 02 / 1969 Type de carte : MasterCard Numero de carte : 5131018223855xxx Numero de compte : Date d'expiration : 10 / 2014 CVN : 336 -WARRANTY time is 12 HOURS. Any cvv purchase over 12 hours can not warranty. -If you buy over 30 cvvs, i will sell for you best price. -I will discount for you if you are reseller or you order everyday many on the next day. -I only accept payment money by PerfectMoney (PM) Western Union (WU) and MoneyGram. -I will prove to you that I am the best sellers. And make sure you will enjoy doing business with me. Contact: ICQ: 640240418 YH: underworld_cvv Mail: [email protected]

  Read the article

• The Silverlightning Talks

  - by Brian Genisio's House Of Bilz

  Tomorrow, I will be speaking in Grand Rapids at the Silverlight Firestarter.  It is a one day event intended to get people bootstrapped with Silverlight.  I will be giving the “Advanced Topics” presentation.  I have decided to run it as a series of “Lightning Talks”.  The idea is to give a lot of breadth so you know that the topic exists and move quickly between them.  To go along with the talks, here are a bunch of links that you might find useful: MVVM http://msdn.microsoft.com/en-us/magazine/dd458800.aspx http://msdn.microsoft.com/en-us/magazine/dd419663.aspx http://channel9.msdn.com/shows/Continuum/MVVM/ http://karlshifflett.wordpress.com/2008/11/08/learning-wpf-m-v-vm/ http://johnpapa.net/silverlight/5-minute-overview-of-mvvm-in-silverlight/ Good MVVM Frameworks http://www.galasoft.ch/mvvm/getstarted/ http://caliburn.codeplex.com/Wikipage   Prism http://compositewpf.codeplex.com/ http://mtaulty.com/CommunityServer/blogs/mike_taultys_blog/archive/2009/10/27/prism-and-silverlight-screencasts-on-channel-9.aspx http://www.grumpydev.com/2009/07/04/why-shouldn%E2%80%99t-i-use-prism/   Unit Testing Silverlight Unit Testing Framework http://code.msdn.microsoft.com/silverlightut http://silverlight.codeplex.com/ http://www.jeff.wilcox.name/2008/03/silverlight2-unit-testing/ NUnit Testing with Silverlight http://weblogs.asp.net/nunitaddin/archive/2008/05/01/silverlight-nunit-projects.aspx Useful Testing Tools http://testdriven.net/ http://nunit.org/ http://code.google.com/p/moq/ http://www.ayende.com/projects/rhino-mocks.aspx   Navigation Framework http://www.silverlightshow.net/items/The-Silverlight-3-Navigation-Framework.aspx http://www.silverlight.net/learn/videos/silverlight-videos/navigation-framework/   Farseer Physics Engine http://farseerphysics.codeplex.com/Wikipage http://physicshelper.codeplex.com/Wikipage http://www.andybeaulieu.com/Home/tabid/67/Default.aspx   Windows Phone 7 http://www.silverlight.net/getstarted/devices/windows-phone/ http://msdn.microsoft.com/en-us/library/ff402535%28VS.92%29.aspx

  Read the article

• Knowledge Transfer without a Plan

  - by Kanini

  Hello...We are doing work for a particular client managing their CRM implementation. (The CRM itself is a product which has been largely customized to suit my client's needs). Now, they want us to manage the Oracle batch jobs/ETL as well. And for this, they are ready to provide us with Knowledge Transfer. (The Oracle batch jobs/ETL is managed in-house by the client now). After much persuasion, I got one of the Project Lead (designation-wise) to email the client asking for a KT Plan. (The Project Lead kept saying that they have never had KT plans before and all that for which I offered I will draft a template and even that was rejected!). Email from us to them - Can you please share with us the KT Plan? Response from them - Not sure what is expected from my side? The KT is planned for tomorrow from 11 am onwards where Functional knowledge of existing ETL Data migration package will be shared. How do you handle such a client? Most likely what is going to happen is this. The person who is giving the KT will say that I have given complete Knowledge Transfer and we will go back and say that "No, this was not covered. For this, they provided an overview alone and left it at that!" and so on... My Project Lead also did not respond to that email. He just said that the meeting is scheduled to happen at 11 AM (basically repeating whatever the email said and left for the day!). What could I possibly do? PS: Look for another job is a very helpful answer, but I am not looking for it. :-)

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >