Search Results

Search found 20065 results on 803 pages for 'practice problems'.

Page 56/803 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• Problems with Startup after Script runs to Shutdown Windows 7 PC

  - by Toby Allen

  I have a simple .bat script to shutdown a kiosk style machine in our work shutdown -h -f this hibernates the machine and I have it running each evening as a scheduled job. However my problem comes when I turn the machine on again. The first time I press power it starts up and then immediately hibernates again, like it runs the script a second time. the second time I press power it stays up. Any suggestions on how I can avoid this?

  Read the article

• Windows 7 & Virtual PC and Internet (gateway) problems on host PC

  - by Mufasa

  I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

  Read the article

• MySQL server installation problems (windows)

  - by waitinforatrain

  Hi guys, I'm trying to install some CMS software (Wiccle). I was using XAMPP's MySQL but was getting a lot of errors (the same configuration works on another machine) so thought I'd install MySQL Community Edition to see if the proplem was related to the MySQL server. When I install and run the MySQL Community Edition service, however, it only works with my XAMPP password, and contains the same tables as the XAMPP install. Is there a common local database file where the database and login info is stored? Any help appreciated

  Read the article

• Problems with notepad++(strange characters)

  - by user24795

  From this morning something strange is happening to my notepad++ editor when I press return(?) on the keyboard I get some strange symbols. Here is the screenshot : or url http://i42.tinypic.com/2ly2ys3.gif What can I do to fix this?

  Read the article

• Cannot access the EC2 server - permissions problems, ssh is dead

  - by user1494072

  One of our developers worked on a beta server and accidentally changed the permissions of the whole system (chmod /) to root. Due to that, services are unable to access files, and we can't ssh to the machine (permission denied on the key) (UPDATE: ssh is dead after reboot, probably can't start). Does Amazon has an option to browse files / physically access the machine? Any other creative solution?

  Read the article

• Problems with the backup

  - by marcodv

  I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

  Read the article

• Problems setting up VLC Sever/client streaming

  - by Ayos

  I'm trying to set up a Linux machine as the server and a Windows XP machine as the client. Both machines are connected to the same local network via a Wi-Fi router. I setup the stream with the following properties : http stream port 8080 play locally And not much else. No firewall on the windows client(Windows firewall is disabled) When I try to open network stream via the client machine(Using VLC or Windows Media Player) I get the following errors: Media Player error code : 0xC00D11B3: Encountered a network Problem. VLC Console: main warning: connection timed out access_mms error: cannot connect to 192.168.1.3:8080 main debug: no access module matching "http" could be loaded main debug: TIMER module_need() : 12625.810 ms - Total 12625.810 ms / 1 intvls (Avg 12625.809 ms) main error: open of `http://192.168.1.3:8080' failed main debug: dead input main debug: repeating item main debug: starting playback of the new playlist item main debug: resyncing on http://192.168.1.3:8080 main debug: http://192.168.1.3:8080 is at 0 main debug: creating new input thread main debug: Creating an input for 'http://192.168.1.3:8080' main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\Accer\LOCALS~1\Temp' main debug: `http://192.168.1.3:8080' gives access `http' demux `' path `192.168.1.3:8080' main debug: creating demux: access='http' demux='' location='192.168.1.3:8080' file='\\192.168.1.3:8080' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "http" main debug: TIMER module_need() : 0.461 ms - Total 0.461 ms / 1 intvls (Avg 0.461 ms) main debug: creating access 'http' location='192.168.1.3:8080', path='\\192.168.1.3:8080' main debug: looking for access module: 2 candidates access_http debug: http: server='192.168.1.3' port=8080 file='' main debug: net: connecting to 192.168.1.3 port 8080 qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'http://192.168.1.3:8080' : 13397.979 ms - Total 13397.979 ms / 1 intvls (Avg 13397.978 ms) qt4 debug: IM: Setting an input Need Help. Thanks in advance.

  Read the article

• Problems restoring old backups in NetBackup 6.5

  - by gharper

  I had a server that was decommissioned & replaced last year, and since the server was no longer in use, I deleted it's client & backup policy from the NetBackup Admin Console shortly afterwards. I recently got a request to restore a file from the old server, however when I specify the source client for the restore, I get an error message saying: WARNING: server (backupserver) does not contain any backups for client (oldserver) using the specified policy type (Standard) as requested by client (backupserver). [Ok] In addition to that error, I can't seem to run a Client Backup report on the old client any more to determine what tapes I need to recall in order to re-index and restore the files... My questions: Does deleting the client somehow remove NetBackups ability to ever restore files from the old system, even if the backups have a retention period of infinity? Is there a way to restore the file from the tape, assuming I can figure out which tape I need?

  Read the article

• Windows 7 reboot and freezing, possible power problems?

  - by mikelbring

  My Gateway LX Series desktop is about 6-8 months old. When I bought it, it had Windows Vista. I then put the RC version of Windows 7 on it. About 3 months after I bought it, it would randomly start to reboot, actually just shut off. I monitored the temperature levels and they seemed normal. So I installed a fresh Windows 7 Ultimate OEM 64bit. It actually got worse and would reboot more frequently. I then contacted Gateway and they said my machine was built for Windows Vista (made me chuckle), and told me to update my BIOS. So I did, and it was fixed for a good couple months. Recently, it started to do it again. Now I noticed early on it was doing it most often, if not every time when I was either watching a flash video or playing a flash game. So I decided to download the drivers again and I also downloaded my motherboard drivers. Seemed to be okay. A week later it started doing it again. And now it's doing it even more frequently. Sometimes I would turn it on, login into Windows and *BAM!* it would shut off. Now I am at the point where I can hardly get it to turn on. It would freeze at the point where it says "Starting Windows", with the Windows logo. Sometimes it would say "Checking disk for consistency" or whatever and freeze there (not shut off, just freeze). I even got the prompt to launch startup repair. But that also freezes when it says starting Windows. It does not really freeze, just never loads up. I am kind of lost as to what's going on. I have a few ideas but nothing I want to pursue (graphics card? hard drive?). Another thing I did try was to boot into a live disk of Ubuntu and try to launch every program I could and get on the internet but I never got it to reboot. So it sounds like to me it's a Windows thing, but I have no idea. I am just stuck and would like to see if any one has any ideas or could lead me in the right direction.

  Read the article

• eAccelerator problems. Please help

  - by Hakzona

  I just recently installed eaccelerator and switched php to dso everything was fine on server Server load was about 1-2 (4 cpus) and after some time server got overloaded (Server load increased to 250) and server stopped. In suphp mode server was overloading by traffic so i decided to switch it to eaccelerator and now i am lost... Can someone explain that?

  Read the article

• Windows 7 Sleep Problems

  - by salcan

  My desktop's Windows 7 installation was working perfectly but recently I ran into a problem where it would not come out of sleep. The system seems to be running it's just that it won't come out of the sleep state. If I have to guess I would say that it's not recognizing the USB and thus not waking. I'd say this was a standard problem with Windows not sleeping/hibernating properly, but it was working fine for about a year and stopped working around two weeks ago. I have hybrid sleep ON and USB selective suspend ON.

  Read the article

• Tmux installation problems

  - by RayQuang

  hI, I am trying to install the terminal multiplexer tmux on my Debian Lenny server so that I can have multiple terminals through ssh. However I have had a lot of difficulty installing it from the debian package, and by compiling it. When I try the package it says something about the wrong version of libc6, and when I compile it I get the following error: server.o: In function `server_start': server.c:(.text+0x273): undefined reference to `event_reinit' collect2: ld returned 1 exit status make: *** [tmux] Error 1 Help would be very much appreciated, RayQuang

  Read the article

• FreePBX: Asterisk in the Cloud (EC2) Audio Problems

  - by neezer

  Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

  Read the article

• Upgrading Windows 7 on a new Netbook - Problems

  - by Swaffle

  I know this seems like a repeat of a question but i didn't get a clear answer from reading the other questions so im going to ask mine and hope i hear back good news. I bought an Acer Aspire one netbook with windows 7 starter. I have a DVD of Windows 7 Professional(x86) from MSNDAA through my college but when i tried to install it, i was given an error saying that i could only upgrade through the "Windows Anytime Upgrade" Though, it only gives me the options of paying for an upgrade, which im not willing to do, or putting in an upgrade key. I have a legitimate product key for windows 7 but it does not work for upgrading and the DVD does not allow for it. Am i doing something wrong? is there another option? can i convert my product key to an upgrade key ? Im up for any option, windows 7 starter is pretty limited in its features...

  Read the article

• Compaq Presario Laptop Monitor Problems

  - by Nishant

  I am attaching a few pics of my laptop monitor now . Can you please tell me if this is a hardware error which can be rectified by replacing the monitor ? How this happened - I accidently hit my leg on the laptop and jammed it against the wall and ever since the monitor is like this .I plan to replace the Monitor by buying a spare parts laptop that sells in ebay . I wonder if this is a LCD HARDWARE problem or problem with the cable that goes to the monitor . THE OS works fine in the computer .I hope my question is clear . http://img163.imageshack.us/gal.php?g=good1z.jpg

  Read the article

• Problems with USB-Devices using VDR

  - by emmsinator

  Hey Guys, I'm using VDR on vSphere4. It works sucessfully. I've already backuped several VMs with VDR and I like it very much. But now we got a problem. We have 2 VMs, using an USB-Device Server with a stick plugged in, which is definetely need by these 2 VMs for Licensing and so. Every time, I start the Backup process, the VMs lost the communication to the USB-Server and its stick after building the snapshot and while online. Because of that, the software on these VMs can't work correctly. I have to restart both Machines to solve this problem. These fact is bad for an automatic backup. Does VDR have a special function for those cases or is something like this already known? It would be no problem, to shutdown the servers for building snapshots on Saturday or Sunday. Can VDR initiate a shutdown before starting the backup process? Otherwise I must try to use scripts, but that wouldn't be so nice. Thanks a lot for your help.

  Read the article

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• Toshiba Satellite A305-S6861 Display Problems

  - by brock029

  Well this is the first Laptop I have ever worked on with a dedicated video card. So, there is no video going to the laptops monitor or to an external. Ripped it apart found the gpu and now am stuck. I cant decide if its the gpu that has gone out or the motherboard. Any one have any suggestions? If it were a desktop I would throw in one of my spare video cards. Mainly I don't want to order the video card and eat the $50 if its the motherboard.

  Read the article

• DNS problems : correct nameserver, namserver working, but not resolving

  - by user1719624

  My problem is as follows. Any suggestions are welcome. [domain].org is not resolving whois and checking the registry information shows that the correct nameserver is set. The primary nameserver is also the server on which domain.org is hosted. The primary nameserver is also used for a number of other domains, and is working fine for those. Logging into the server, I can ping [domain].org and it resolves correctly. Setting the nameserver as my own DNS server on my laptop, and the URL resolves correctly. If the domain has the correct nameserver set, and the nameserver can resolve the URL to the correct IP address, and if I use the nameserver as my DNS then it resolves correctly, AND the nameserver is used for other domains which are resolving correctly, then why isn't it working? NB : this is a new domain registration and has been set up for around 10 days now, so it's not simple slow propagation. Any ideas? thanks

  Read the article

• Network problems that might be related to NAT

  - by nenne

  Hello, I have an odd setup where there is a router(Router 2) routing between network network 1 and network 2. One router(Router 1) with nat for internet access that routes between internet and network 1. There are people in both of these networks. All the clients in network 1 can access the internet, the clients in network 2 can access the clients in network 1 and can also access the router 1. Router 1 can also access clients in network 2. However, the clients in network 2 cannot reach the internet. I cannot think about anything in the routing tables that would hinder this, since Router 1 can reach the clients in network 2 and vice versa. Can it be that nat starts the session between router 2 and the internet site/machine instead of the client and the internet machine? Does anyone have any ideas? I have very little control over router 2(its basicly an ISP vpn net service) but full access to router 1. Its an ubuntu 10.04 with iptables for nat/firewall setup.

  Read the article

• Where might I be having problems with making web server acessable (XAMPP)

  - by Erx

  I've installed XAMPP and it seems to be working - sort of. It will serve pages if I access it via http://localhost or 127.0.0.1 but not if I use the actual IP address I have. I thought it might be a firewall issue, so I turned off the firewall and the issue still remains. I don't have enough experience to know where to look next, so I thought I might get some advice here. Running on Vista. The error I'm actually getting it "Timed Out". I've had XAMPP running on this machine prior, but I've had to reinstall my OS/new hard drive ... and I can't seem to get it working.

  Read the article

• Motherboard with embedded hdmi problems with Windows 8 Consumer Preview (64bit)

  - by duluca

  I'm specifically referring to GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX with a Core 2 Duo chip. This computer is connected to a Sharp Aquous TV using HDMI. It all worked fine with Windows 7 64 bit. In Device Manager I see GeForce 9400 and have installed the latest NVidia drivers (295.73 WHQL). However, when I click on the change the screen resolution to 1920x1080, I see that Windows 8 thinks that it's using some other graphics card with Microsoft Basic Display Driver. This was made clear, when I tried to launch the NVidia tools and it claimed that the current monitor (in this case my TV) wasn't attached to the GeForce 9400 card. In Device Manager, there's a "Coprocessor" and "Unknown device" without drivers, but I've no idea what they are. I've run the original CD that the motherboard came with no success. Any ideas?

  Read the article

• Problems getting auditd set up on my server

  - by Tola Odejayi

  I'm trying to figure out which processes are deleting files from a specific directory, so I want to set up and run auditd on my system. I've set up the following rule in audit.rules: -w S unlink -S truncate -S ftruncate -a exit,always -k cache_deletion -w /home/myfolder/cache Then I type this to start the audit daemon: auditctl -R /etc/audit/audit.rules -e 1 But I get this error message: Error - nested rule files not supported Does anyone know what I am doing wrong here, and how I can resolve this? Also, what do I have to do to get the daemon running at startup?

  Read the article

• Homegroup sharing problems

  - by soandos

  I can see other people in my homegroup and their folders, but when I click on those folders, I cannot see the contents (no error message, just nothing happens). The other people in the Homegroup can see me just fine, and my files In addition, I cannot see the files that they have under the network tab, though they can all see each others stuff. What could be the issue? The homegroup has already be created and recreated numerous times. Perhaps unrelated, but I am unable to turn off password protected sharing.

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >