Search Results

Search found 2349 results on 94 pages for 'zune hd'.

Page 56/94 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Realtek audio AC 97 5.1 on Windows 7: Terrible subwoofer quality

  - by Edu

  I have a media center PC with on-board Realtek AC97 Audio. I have been using Windows XP for a couple of years with great audio quality. I just upgraded this PC with Windows 7 and installed the latest Realtek drivers from http://www.realtek.com.tw/downloads/ At the testing screen, all the speakers works correctly (including subwoofer). Despite that, while playing any movie or music, the subwoofer quality is terrible. From it it just comes noises, in the correct rhythm but quite low and quite out of tone. I compensated the loudness by putting the other speakers lower but the sound of the subwoofer is really terrible. Is there anyone facing the same problem? Does anyone have a workaround for that? PS.: I had gone past the steps given in Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip but still I have a bad quality of sound. My problem is very similar to the one in http://www.mp3car.com/car-audio/143796-realtek-hd-audio-is-robbing-my-subwoofer.html

  Read the article

• Having issues with flickering output to TV from Windows 7 laptop

  - by Nimmy Lebby

  I cannot tell why this is happening. I cannot get a pattern as to when it happens. Sometimes, I watch entire Hulu content without any interruptions. Other times, it happens 2-3 times in a span of 3 minutes. Then it stops for 10-15 minutes. Lenovo T410s Integrated graphics: Intel HD Graphics (Driver=8.15.10.2253, Video BIOS=2026.1) TV is a Zenith (does not happen with other laptop so doubt it's TV) TV connected to laptop using HDMI-to-DVI cable (previously was connected directly via DVI but I bought a new cable and it's still happening) Anyone could help me troubleshoot this? I'd greatly appreciate it. If you need more information, I'll be glad to provide it.

  Read the article

• Good HDMI splitter/switch solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter/switch do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• Can't download updates for reinstalled Office 2000 on WinXP OS "expected version not found" error message

  - by mpmadigan

  I replaced HD and reinstalled WinXP Pro and successfully downloaded all of the service packs and security updates. I've reinstalled my licensed version of Office 2000 (upgrade version from Office 97). The software installs and is functional; but when trying to install updates SR-1 or SR-1a or any individual security update I get error message "expected version of product not found". Microsoft no longer provides support for this legacy version of office. I can't find any support documents in Microsoft's database that addresses this issue. This is my sister's computer and I've already come out-of-pocket $100 for hardware (not counting the $$hours of labor). She only uses MS Word for minimal correspondence. No desire to spend $100+ for new version of Office. I would greatly appreciate any suggested fixes for this problem.

  Read the article

• Configuring SMB shares in OS X

  - by Craig Walker

  I'm at my wit's end trying to control SMB file sharing on my Mac. (OS X 10.5 Leopard). I want to do something fairly simple: share a particular (non-home, non-Public) folder over my my SMB/Windows network with two users (accounts are local to my Mac), and share no other folders with anyone. The instructions on the internet are fairly straightforward: add the folders to be shared to the File Sharing panel of the Sharing System Preferences pane: ..and ensure that I'm sharing through SMB: However, when I actually try to connect via a SMB client (Windows XP in this case), the share does not appear. I see my home directory, "Macintosh HD", and my printers, but not the folder I just shared. I ensured that the underlying directory had the proper permissions (since this seems to affect share visibility) and that the "Shared Folder" checkbox was checked: ...but this didn't have any effect. I checked /etc/smb.conf but there was nothing obviously out of place there. I've also restarted smbd and rebooted. What else should I be looking for?

  Read the article

• How do I replace the screen of a Dell Ispiron 1545?

  - by Ajus10

  I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

  Read the article

• Full Screen Flash is choppy (nVidia GeForce 8200M)

  - by Joel Martinez

  I have a new compaq presario laptop (I asked SU for advice before I bought it :-) ). It has a nVidia GeForce 8200M video card. When I try to play a flash video full screen, it plays really choppy. This is a brand new computer and is well more powerful than my previous computer so I know it's not a matter of the full screen being too processor intensive to play, or a bandwidth problem. Even playing HD hulu videos full screen was fine on my previous laptop. Any advice on how to get better performance here? edit: World Of Warcraft is able to play at a great framerate, so this machine should definitely be able to handle a simple little flash video ;-)

  Read the article

• How to get AMD Catalyst working on Arch x86_64

  - by gh403

  I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

  Read the article

• NAS + XBMC combination

  - by Hendrik

  I currently own a WD Sharespace and I am not too happy about it. It will freeze constantly and its rather slow. I've been thinking of replacing it. I also own a WD HD Live, and it works like it is supposed to, but recently I've seen XBMC in action and I was quite impressed. I've been wondering lately about the possibility of replacing both products with one new device: a fast reliable nas which I can install XBMC on and is capable of rendering video and has an HDMI out. Do any such devices exist for sale or is the only way to build one from scratch? I've seen HTPC's for sale but I've never seen any of them with a raid setup. I've also read about building your own NAS with freeNAS but those setups dont allow you to run XBMC. Does anyone have experience with this?

  Read the article

• Which mediacenter appliance

  - by Guillaume

  I'm looking to buy a mediacenter appliance, but I am a bit lost by all the offers on the market. Here are the features I am looking for : at least 500Go HDD capable of playing HD (1080p) supporting a good range of video and audio codecs support for subtitles including a DVB-T input (coax) and tuner composite video input 5.1 (or 7.1) analog audio output LAN (100M or Gigabit) fileserver (SMB or NFS) remote control possibly digital output (S/PDIF, TOSLINK, or other) no need for integrated DVD player no need for wifi The Ultio Pro looks nice (http://www.thinkgeek.com/electronics/home-entertainment/d3fe). It just lacks a DVB-T input which is a show killer for me. Thanks for your suggestions.

  Read the article

• Setup kickstart boot for all installation media types (cd and usb-flash)

  - by Cucumber

  I created own custom CentOS iso. I used mkisofs make it. This is part of my isolinux.cfg file: label vesa menu label Install ^RAIDIX system kernel vmlinuz append initrd=initrd.img xdriver=vesa nomodeset text linux ks=cdrom:/isolinux/ks.cfg If I specify parameter ks=cdrom:/isolinux/ks.cfg my iso will boot only from cd or dvd-rom. If I specify parameter ks=hd:<device>:/ks.cfg my iso will boot only from usb-drive. Can I specify ks parameter to boot from both type of installation media?

  Read the article

• Burn DVD mastered format DVD+R

  - by Zeus

  Using windows Vista, can I write DVD+R discs using mastered format? I've followed the instructions here But when I get to step 6, it gives an error "There was an error burning this disc. The disc might no longer be usable" There are no dollar signs in my files or extensions, and I have plenty of free space on my HD. I can successfully make a data disc using "live" format. Unfortunately my colleges home (XP) PC is unable to read it, despite the fact that it works on other XP machines at work... so I thought I'd try making a mastered one for greater compatibility. Any ideas?

  Read the article

• Running hardware with only 32bit drivers in 64bit windows

  - by Howard

  Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

  Read the article

• AMD Phenom 2 is idling at 50°C, can I get it cooler?

  - by liam

  Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

  Read the article

• HP Omni 27-1027c AIO...Upgradeable?

  - by Bobo

  I just bought an HP Omni 27 1057c from Sams Club. I like it a lot, but I want more performance. discovered that the integrated Intel HD 2500 graphics is almost useless for most games. I found a website that says it can be upgraded at http://www.pcmag.com/article2/0,2817,2398314,00.asp. The computers specs can be found at Sams Club website or at HP website HP Product Specs. So what do you think? Can I upgrade Motherboard and Video Card?

  Read the article

• What is a usable throughput for a home media server

  - by Craig

  I am looking to setup a home server that will act as a media server. This will include both video (possibly HD) and audio. The clients will be a fun mix of hardware but that is a different question. What I want to know is what is the minimum throughput for streaming video without hitches? Is there a "sweet" spot for throughput (price vs. throughput)? I am determining my budget for this "upgrade" and I need to evaluate wether or not upgrading to a 1 Gbps home LAN is required. Sure, it would be sweet and easily handle the traffic but I don't want to do it unless it is necesary.

  Read the article

• iPhoto fails to see my new iPhone 3Gs

  - by Alexey Kulikov

  Two weeks ago I have bought the new iPhone 3Gs. It synced like charm with iTunes and I was happy until a couple of days ago when I noticed that there was absolutely no way I could get any photos from the phone to my mac, as it doesn't even appear in the device list. Long story short — i have even tried resetting Leopard completely from scratch (and formatting the HD beforehand). Still no joy. Leopard Snow 10.6.1 absolutely clean install with all updates iPhone 3Gs 3.1.2 - syncs like charm with iTunes, but NOT iPhoto Mac Book Air Any help will be greatly appreciated! update: It works with my old iphone, why can't the 3Gs work?

  Read the article

• Identifying the version of ATI Catalyst drivers

  - by snark

  I have bought a new video card based on the ATI Radeon HD 5670 chipset. I couldn't make it work with the latest ATI Catalyst drivers found on their website, only the drivers found on the CD delivered with the card worked. How can I know the version of Catalyst that is installed on my PC (running Windows 7 64-bits)? The ATI Catalyst Control Center returns the following information: Driver Packaging Version 8.673-091110a-092263C Provider ATI Technologies Inc. 2D Driver Version 8.01.01.973 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version 8.14.10.0708 OpenGL Version 6.14.10.9120 Catalyst™ Control Center Version 2009.1110.2225.40230 I do not recognize anything pointing to a "marketing version". The website says the current version of Catalyst is 10.2.

  Read the article

• Where is the Mac Divx Web Player 7 cache folder?

  - by user30710

  Until recently, I was using Divx web player 1.4.2 because it seemed to be the least buggy. It was saving files in users/xxxxxx/movies/divx movies/temporary added files and was deleting them when the cache limit was reached. Now with 7, it's saving them alright cause I can watch my HD space go down, but I can't find them. And it's not respecting the cache limit size (mine is 4GB). The only way to clear up this space is a restart of the Mac. I'm running 10.6.8and Chrome. I've looked everywhere for the folder manually. Where is it?

  Read the article

• Can't write to file - 'Operation not permitted' WITH sudo

  - by charliehorse55

  I am having trouble writing to a few files on an external HD. I am using it to store media files as well as my time machine backup. The drive is formatted as HFS+ Journaled, and other files on the drive can be written successfully. Additionally, the time machine backup is working perfectly. Permissions for the file: $ ls -le -@ Parks\ and\ Recreation\ -\ S01E01.avi -rw-rw-rw-@ 1 evantandersen staff 182950496 22 May 2009 Parks and Recreation - S01E01.avi com.apple.FinderInfo 32 Things I have already tried: sudo chflags -N sudo chown myusername sudo chown 666 sudo chgrp staff Checked that the file is not locked (get info in finder) Why can't I modify that file? Even with sudo I can't modify it at all.

  Read the article

• How to get better video quality in Lync?

  - by sinned

  I want to use a ConferenceCam from Logitech to stream talks live via Lync. When I view the RAW webcam image via VLC, the quality is very good (but the latency is high because of buffering). However, when I stream it using Lync, the video gets blurry. Is there a way to ensure QoS in Lync or otherwise improve the video quality to (near-)native? I would rather have some dropped frames than a lower resolution where I can't read the slides. In my setup, I use Lync with an Office365-E3 contract, so I have no Lync-Server in my network. I thought about replacing Lync completely with VLC, but I first want to try Lync because VLC will probably cause firewall issues. Also, I haven't looked up the VLC parameters for less buffering, faster encoding, a bit lower resolution (natively it's more than HD) and streaming.

  Read the article

• What resolution can the eeePC 1001HA/1101HA handle with an external monitor plugged in?

  - by Marco Demaio

  I would like to buy a new Eee PC 1001HA or 1101HA. I know the max display resolution is: 1024x600 for eeePC 1001 1366x768 for eeePC 1101 But what's the maximum resolution of the graphic board when connecting these two computers to an external LCD monitor? Let's say the external monitor supports a full HD resolution of 1920x1080. Are these eeePC graphic boards able to go up to such resolution? It's really incredible to me how such a useful piece of information is missing everywhere on every ASUS website. EeePCs are very well suited to be connected to external monitor, so I can't believe how difficult is to find out this information. I downloaded the manual, but it's not in there either. So I'm hoping somone has got one and knows the answer.

  Read the article

• Mac OS X file recovery

  - by Daniel

  I thought that all operating systems would merge folder content when being moved to the same location. Imagine my surprise when that didn't happen and I have hundreds, if not thousands of files that have gone missing and are nowhere to be found. Because they were not "deleted" they are not in the trash bin. I've tried to do some recovery using a program called stellarPheonix but after about a 24hour scan, it didn't recognize any of the raw files (.dng,.arw) as image files and so I couldn't see if they could be recovered. It also didn't show the directory structure, which would be handy. I tried a quick scan, but all it showed was files that were still on the HD, not sure what the point of that is. I've used recover 2000 on Win and it does a good job, does anyone know of anything that works quickly and reliably for this kind of file recovery. (I don't think I should have to do a sector-by=sector for this kind of file loss)

  Read the article

• Can I get my video card to output a DVI and VGA signal at the same time?

  - by Roy Pardee

  Hey All, I've got: a lovely 24" monitor, w/both DVI and VGA inputs, a personal desktop w/a Radeon HD Pro 2400 video card (both DVI and VGA outputs) a work laptop w/both outputs, and a KVM switch that handles VGA only Right now I've got laptop connected to the monitor's VGA, and the desktop connected to the DVI. This works, but requires me to switch the KVM and monitor input sources separately, which annoys me (I switch back & forth a lot to make skype calls & manage my music). I'd like to feed both VGA and DVI signals out of my desktop so I can do quick things on my desktop & switch right back, but then when I'm done working, switch the monitor over to DVI to get the crisper picture. Alas, just attaching both VGA and DVI cables to my desktop's video card did not do the trick. Can this card be persuaded to output both signals at the same time? Many thanks! -Roy

  Read the article

• Good HDMI splitter solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >