Search Results

Search found 22546 results on 902 pages for 'mode management'.

Page 562/902 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

  • Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

    - by Nakedible
    I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

    Read the article

  • SQL Server 2000 + ASP.NET: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by Rick
    I just migrated a development workstation FROM: Windows XP Pro SP3 with IIS 6 TO: Vista Enterprise 64bit with IIS 7 Since the move, one of my pages that accesses an SQL Server 2000 database is receiving the following error from my ASP.NET 2.0 web page: "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'." I have: enabled Windows Authentication in IIS and web.config disabled Anonymous Authentication in IIS set up Impersonation to run as the authenticated user verified that the logged in user (in this case, me) has access to the appropriate database on the SQL Server verified that my login and impersonation information is correct in the ASP.NET page by checking User.Identity.Name and System.Security.Principal.WindowsIdentity.GetCurrent().Name (both display my username) My connection string using SqlConnection is "Server={SERVER_NAME};Database={DB_NAME};Integrated Security=SSPI;Trusted_Connection=True;" Why is it trying to login with NT AUTHORITY\ANONYMOUS LOGIN? I have to assume it's some setting or web.config entry specific to IIS7 since it worked fine before the migration. NOTE: The SQL Server is Windows authentication only - no mixed mode or SQL only.

    Read the article

  • Configure Supervisor to manage init.d services

    - by Eduard Luca
    I installed uwsgi and created a bash script, which allows me to start/stop uwsgi in the following manner: service uwsgi [start|stop]. This bash script is located in /etc/init.d/uwsgi. Now, I want to (politely) ask Supervisor to use that script to manage the uwsgi process. All the tutorials indicate that this is not the way to do it, however I do want to be able to do both service uwsgi stop and supervisorctl stop uwsgi (not sure if I nailed the syntax of the latter) -- even though I am aware that the first one will not in fact stop my service because supervisor will restart it (that's exactly what I need). Note that I'm using uwsgi in emperor mode if that matters in any way.

    Read the article

  • How to install the TRIM RAID update for the Intel storage controller?

    - by Mike Pateras
    I just found this article, that says that Intel now supports TRIM for SSDs when the Intel storage controller is in RAID mode. It links to this download page. I'm pretty excited about that, but I'm a little confused. There seem to be two sets of drivers, an executable and something that's bootable. I ran the executable. Is that just to apply the drivers to my system now, and are the bootable drivers so that if I re-format, I won't have to re-run everything? Do I need to do both? And is there a way to check if it worked? I'm running an i7 in Windows 7 (ASUS P6T Deluxe Motherboard) with RAID 0, if that's significant.

    Read the article

  • How to protect an OS X Server from an unauthorized physical connection?

    - by GJ
    Hi I have an OS X 10.6 server, which I administer via SSH and VNC (via SSH tunnel). I can't leave it at the login window since then VNC connections are refused. Therefore I currently leave it logged with my user account. Since it doesn't have a monitor attached, it doesn't go into screen saver mode, which means it doesn't require a password to retake control. This means it is very easy for anyone connecting a keyboard/mouse and monitor to take control of the system. The screen saver password protection, which I can't get to activate, unlike the system's login window, is perfectly compatible with VNC connections. How could I prevent such direct access to the server without connecting a monitor and without blocking my ability to connect with VNC? Thanks!

    Read the article

  • Is there a way to see what is typed or websites visted when a spouse is using google chrome in incognito ?

    - by Ken
    My spouse and I have 2 laptops both running windows 7 and I have 1 desktop running vista. I have reason to believe she is cheating and I want to watch her internet usage, She is always using google chrome in incognito mode. I have tried a few keyloggers but they never seem to be able to get the keystrokes when she is on google. I dont know if there is a way I can network them so they go thru my desktop then to the internet. We are using Brighthouse cable internet. any ideas would be great thank you

    Read the article

  • Software for formatting / web-publishing tutorial-type, technical articles

    - by gojira
    I want to put some of my own technical writing on the web: tutorials, how-to's, conceptual articles about programming etc. I write mostly for myself yet, but think others can benefit from it so I want to put it online, and I also have plans of making everything more coherent and turning it into a book. My articles are not meant as a blog, they're just meant as a collection of tutorials and how-to's, but I think a blog-type software would probably be the most appropriate mode of formatting that kind of stuff. Right now I am using the blog feature of cite u like, which is very low tech and I really need something better. On my wish list is, among other things: code snippets in scrollable boxes syntax highlighting for source code snippets tagging articles with graphical icons according to topic, like in slashdot of course users (i.e. readers) should be able to comment on articles Also, just more options than a super-simple blog should look slick! should not look wikipedia-like Is there any software you can recommend for this purpose?

    Read the article

  • O'Reilly Safari Books Online and Sony Reader

    - by Steve
    I've accumulated a good collection of book snippets in pdf format from Safari Online and I was thinking about getting an ebook reader, specifically the Sony-PRS300, to hold them all for portable reference. If anyone has done this, two questions. Are there any DRM restrictions when the pdfs are put on the reader? I can't see any restrictions flat out in the pdfs on my notebook. There's a watermark that says the pdf is licensed to me. How good is the reader at rendering complex pdfs, with code snippets and illustrations? I read a previous post where it works fine in landscape mode. I can deal with that. Thanks in advance.

    Read the article

  • Second video card (PCI) under Windows 7

    - by dbkk101
    I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

    Read the article

  • How to get partition information from non-booting server?

    - by gravyface
    Need to manually rebuild a mirrored array on a server and am in the process of reinstalling SBS 2003 on it. However, it's a Dell server, and know that there's the Dell FAT32 diagnostics partition, a system partition, and a data partition, but do not know the size of each. Planning on reinstalling SBS 2003, all applications on the server, and then doing a System State restore, but figured that not having the correct partitions will cause some grief: am I right? Almost thinking that the size of the partitions shouldn't matter, but not positive. Question: should I care about the size of the partition? If so, how can I get this partition information from a non-booting drive? We have an Acronis image of the one working disk and the partitions are mounted/viewable in Explorer on a workstation, but I'm not sure where the Logical Disk Manager/Disk Management data is stored and/or if there's a way to retrieve it without having a working Windows installation.

    Read the article

  • SQL2008 Won't Work After SP1 Install?

    - by leen3o
    I have SQL2008 installed on my Win2008 server, and its been working fine - I have sites running using SQL databases etc.. I thought I would install SQL2008 SP1, but after install I cannot connect to SQL via Management Studio, and in configuration manager I cannot start SQL? TITLE: Connect to Server Cannot connect to #MYINSTANCENAME#. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 BUTTONS: OK I'm not really a techie so a bit stuck?? any ideas??

    Read the article

  • Screen multiuser - Permission denied

    - by Zlug
    I'm trying to send input to a screen session from php. So far I have followed the steps explained here Is running GNU Screen suid root the only way to make multiuser mode work? And I have set "multiuser on" and "acladd www-data" in the screenrc file (or well, no. in another file that I use by the -c option but still) My problem now is that whenever i try to acess screen by php exec('screen -S user/session -p 0 -X stuff "test"'."\n", $ret); I get the error: Cannot opendir /var/run/screen/S-user: Permission denied

    Read the article

  • Should I upgrade my LinkSys WRT54GL firmware?

    - by Reid
    I have a LinkSys WRT54GL v1.1 which currently has stock firmware version 4.30.7. I see that version 4.30.14 is available. The router works fine now, and the release notes look uninteresting except for one line in v4.30.9: "Resolves issue with Linux kernel vulnerability". I have remote management turned off. I'm aware of the 3rd-party firmwares but the stock firmware works fine for me at the moment, so I don't have an interest in those. Is the status quo fine or should I upgrade the firmware? (It's a bit of a pain since the config has to be saved and reloaded, and obviously any mucking with firmware is risky.)

    Read the article

  • How to configure remote access to multiple subnets behind a SonicWALL NSA 2400

    - by Kyle Noland
    I have a client that uses a SonicWALL NSA 2400 as their firewall. I need to setup a second LAN subnet for a handful of PC. Management has decided that there should be a second subnet even though intend to allow access across the two subnets - I know... I'm having trouble getting communication across the 2 subnets. I can ping each gateway, but I cannot ping or seem to route traffic fron subnet A to subnet B. Here is my current setup: X0 Interface: LAN zone with IP addres 192.168.1.1 X1 Interface: WAN zone with WAN IP address X2 Interface: LAN zone with IP address 192.168.75.1 I have configured ARP and routes for the secondar subnet (X2) according to this SonicWALL KB article: http://www.sonicwall.com/downloads/supporting_multiple_firewalled_subnets_on_sonicos_enhanced.pdf using "Example 1". At this point I don't minding if I have to throw the SonicWALL GVC software VPN client into the mix to make it work. It feel like I have an Access Rule issue, but for testing I made LAN LAN, WAN LAN and VPN LAN rules wide open with the same results.

    Read the article

  • Win2008 DC in a Windows 2000 domain: can I keep the old DC?

    - by gravyface
    Will be putting a new Windows 2008 SE Server into a single domain network with two domain controllers, both running Windows 2000 Server. The functional level of the domain is mixed mode/2000. Until a second 2008 DC can be purchased, I'd like to leave the current Win2k operational master DC as a backup DC as the other member servers running 2003 have either accounting/SQL or Exchange on them. Eventually all the w2k servers will be decommissioned, but until then, I need another DC for redundancy. Following the standard process for adding a new DC, can I leave the old operational master DC (or the other backup DC) running after I transfer the FSMO roles to the new server? Will this cause any issues?

    Read the article

  • Upgrading drives on a MD3000

    - by Anonymouse
    Hello, Our MD3000 array is getting full as our databases are growing and we need more spaces. Currently, we use a MD3000 with a two-servers Windows 2003 cluster and 15x 73GB SAS drives. Disk groups are configured in RAID1 of two drives. The approach we are currently investigating is simply swapping the existing SAS drives with bigger ones (300GB instead of 73GB), one at a time, and let each RAID1 array rebuilt. Is it a good approach? Will we be able to resize the array afterwards? Will we be able to resize the partitions afterwards? Can the Dell M3000 Management software do it or will we have to bring the server offline and use some partition software to do it? Thanks in advance.

    Read the article

  • FTP issue - VSFTPd and connecting to from FileZilla

    - by B Tyndall
    I'm trying to connect to a CentOS Linux box that I have hosted on EC2 and I think I have everything configured correctly but when I try to connect I get this series of messages Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.0.5) Command: USER tyndall Response: 331 Please specify the password. Command: PASS ********* Response: 230 Login successful. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/tyndall" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing Not sure where to start troubleshooting this issue. Any ideas? Do I need to change any permissions? I would think this ID has the ability to see my own home directory. I am able to push/pull files from the command line version of FTP client working on Windows.

    Read the article

  • How to type a small fraction in Word 2007 equation editor?

    - by Timwi
    In Word 2007’s equation editor, I can enter “1/2” and I will get a properly formatted fraction. However, there is another kind of fraction that uses a smaller font size. How do I type that one using the keyboard alone? I notice that if I switch to linear mode, I get a small box displayed: Using the clipboard, I find that this is the same box (U+25A1) that I also get if I type “\box”. Despite, typing “\box(1/2)” still turns into a normal-size fraction and not the small fraction. How do I type the small fraction?

    Read the article

  • ASP.NET, PostgreSQL, Mono, Ubuntu, Apache: Good idea?

    - by wreck_of_u
    I am a long-time Microsoft .NET developer. ASP.NET/MSSQL/IIS has been my bread & butter over the past 6 years. Now, I'm getting fond of the "lightweightness" of Ubuntu 10.xx server. I'm also loving SSH-ing it from my Windows 7 PC and installing apps using the awesome "apt-get" command. I've also been using HeidiSQL with MySQL now and loving it. It feels like Management Studio. However, i've read that PostgreSQL "may" be better than MySQL, and I did experience some MySQL overloads in my Moodle box (but this can be just a poor tweaking in my part). My question is, would it be a good idea to run this configuration? ASP.NET 4.0 PostgreSQL (the latest one I can apt-get!) Ubuntu 10.10 with Mono running on Apache Also, I assume I would be using Npgsql for Mono as my connector from ASP.NET to PostgreSQL?

    Read the article

  • How can I fix my WRT54GL's constant crashing?

    - by Aarthi
    I have a Linksys WRT54GL wireless router (the old blue-and-black) whose underside indicates it is Version 2. I've noticed that, on wireless mode, if I am on a Skype call or in a Google Hangout, the wireless aspect will crash completely. In addition, if I am connected via an ethernet cord, my quality (that is, how my voice is received) tanks very quickly. I suspect this is due, in part, to my internet connectivity itself (I'm on Comcast instead of Verizon FiOS, as I'd prefer) but I'd like to stop my wireless router's wireless capability from crashing. I considered a firmware upgrade, but it looks to me as if I am upgraded. Short of manually running ethernet all over my house, I'm not sure what to do. How can I solve my wireless router's issues? If the answer is "buy a new router," then that's valid, as well, in my opinion.

    Read the article

  • Benchmarks relevant for a Visual Studio .Net development workstation

    - by user30715
    I am developing a system with Windows 7-64, Visual Studio and Sharepoint on a virtual workstation on some kind of VMWare server. The system is painfully slow, with VS lagging behind when entering code, Intellisense lagging, opening and saving files takes ages when compared to a normal budget laptop. As far as I can see the virtual machine has OK specs and does not seem to be swapping etc., and the IT dept also says that they can't see anything wrong when they're monitoring the system. As long as the problem is not well-documented, the IT dept and management does not want to throw money (=upgraded laptops) at us, so I need to show some sort of benchmark. It has been many years since I did any system benchmarking, and I don't know the current benchmark software, so my question is which benchmark will be most relevant for Visual Studio performance? Not just for compiling fast, but also to reflect the "responsiveness" of the system. Cheers, user30715

    Read the article

  • In what way does non-"full n-key rollover" hinder fast typists?

    - by Michael Kjörling
    Wikipedia claims (although the latter claim does not cite a source) that: High-end keyboards that provide full n-key rollover typically do so via a PS/2 interface as the USB mode most often used by operating systems has a maximum of only six keys plus modifiers that can be pressed at the same time.[4] This hinders fast typists, ... In what way would the system being able to recognize only six non-modifier keys at once hinder a fast typist? I consider myself a relatively fast typist and I usually press one key, plus modifiers, at once; I can't imagine any real-life situation in which the system only recognizing six non-modifier keys being pressed at once has been a limiting factor in my keyboard usage. (Multi-stroke keyboard shortcuts as used by high-end software like Visual Studio, Emacs and the like are a different matter.) Note that I am not really interested in answers centered around multiplayer computer games; I'm looking for answers that give reasons that would be relevant to typists, somehow supporting the statement made on Wikipedia.

    Read the article

  • ScreenShare: command line and observe only.

    - by Shyam
    Hi, I have a wide TV screen that is attached to a Mac Mini. I am able to use this screen as a second screen using an application like ScreenRecycler. However, Sometimes I want to demonstrate what I am doing on my box on this TV screen. As this TV is attached to a Mac Mini, I want to have a screen sharing done reversed. As I know screen share can be done in observe mode and full screen, this would be more than sufficient. Because it would be pretty useless to run it continuously, I want it on demand. For this, I want to use SSH. So the only thing I would like to know is, how do I start screen sharing in from a Terminal Session. On Windows, I could start an application by using "start notepad.exe", I am looking for something similar. Eventually, I want to make this work on other boxes too. Thanks for your help!

    Read the article

  • dhcrelay running as both DHCP and DHCPv6 relay agent on CentOS 6.2

    - by Tibor
    I am trying to set up a DHCP relay agent that would relay DHCP requests for both IPv4 and IPv6. I am using CentOS 6.2 and I am using the dhcrelay from the ISC DHCP implementation. I would like to set it up as a service, but the man page for dhcrelay states: -6 Run dhcrelay as a DHCPv6 relay agent. Incompatible with the -4 option. -4 Run dhcrelay as a DHCPv4/BOOTP relay agent. This is the default mode of operation, so the argu- ment is not necessary, but may be specified for clarity. Incompatible with -6. It seems that the -6 and -4 options are incompatible. How would I still make it work for both protocols without rolling my own service wrapper for both cases?

    Read the article

  • How to use an USB digitizer?

    - by Magnetic_dud
    Hello, i am in China now, and when i saw an USB digitizer (resistive), i bought it, thinking that i could be used as a mouse. When i connect it to my windows 7 rc1 laptop, the system properties says "pen input available" But, nothing happens when i touch the panel... i installed the bundled drivers, in chinese only, and NOT in unicode (so the text is garbled) When i install the driver, i get access to a special key on the tablet, "switch from pen input to mouse", and the driver will move the pointer according to the position on the tablet. (but no click) If i use the "pen mode", the computer will use a special chinese IME that is very awkard, i want to use the microsoft ime, and be able to draw/take notes on the screen There are "generic" drivers? Or just a plain mouse driver that will click when i press on the surface The tablet name is "qiancai"

    Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >