Search Results

Search found 22546 results on 902 pages for 'mode management'.

Page 564/902 | < Previous Page | 560 561 562 563 564 565 566 567 568 569 570 571  | Next Page >

• Laptop stopped recognizing USB hard drive

  - by vahokif

  Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

  Read the article

• Exchange 2010 - Trying to add an additional domain fails

  - by Tom Beech

  We're trying to add an additional domain to our existing exchange 2010 box. I'm doing this under our network administrator user which has pretty much every permission but i'm getting: VERBOSE: Connecting to EXCHANGE01.isd.isdevelopment.co.uk VERBOSE: Connected to EXCHANGE01.isd.isdevelopment.co.uk. [PS] C:\Windows\system32>new-AcceptedDomain -Name 'NewName' -DomainName 'newDomainaddress.com' -DomainType 'Autho ritative' Active Directory operation failed on DCSERVER01.isd.isdevelopment.co.uk. This error is not retriable. Additional inform ation: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BB9, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-AcceptedDomain], ADOperationException + FullyQualifiedErrorId : 282695C2,Microsoft.Exchange.Management.SystemConfigurationTasks.NewAcceptedDomain Any help will be appreciated. Tom

  Read the article

• Broadcom bluetooth driver for Windows 7 on MacBook Pro

  - by Sergiy Byelozyorov

  I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

  Read the article

• Can you install Ubuntu Server in a Windows PC VM on Windows 7?

  - by Lance Fisher

  I am running Windows 7 64-bit. I've installed Windows Virtual PC and Windows XP Mode successfully. Next, I downloaded Ubuntu Server 9.04 32-bit. I created a new virtual machine with a dynamically expanding .vhd, loaded the Ubuntu .iso, and booted the machine. I successfully made it through the install, but when the machine reboots, I get a segmentation fault. Here is a screenshot. Has anyone successfully installed Ubuntu on Windows Virtual PC?

  Read the article

• What does "cpuid level" mean?

  - by ogzylz

  For an example, I put just output from 1 core of a 16 core machine. What does the output mean by "cpuid level" of "6"? Also, what do "bogomips" of "5992.10" and "clflush size" of "64" mean? processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception: yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment: 128 address sizes: 40 bits physical, 48 bits virtual power management:

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• Redhat | error in mod_swgi installation

  - by MMRUSer

  I'm getting the following error when I try to install mod_wsgi ./configure checking for apxs2... no checking for apxs... /usr/sbin/apxs checking Apache version... 2.2.3 configure: creating ./config.status config.status: creating Makefile make /usr/sbin/apxs -c -I/usr/local/include/python2.6 -DNDEBUG mod_wsgi.c -L/usr/local/lib -L/usr/local/lib/python2.6/config -lpython2.6 -lpthread -ldl -lutil -lm /apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -fno-strict-aliasing -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -D_LARGEFILE64_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/local/include/python2.6 -DNDEBUG -c -o mod_wsgi.lo mod_wsgi.c && touch mod_wsgi.slo sh: /apr-1/build/libtool: No such file or directory apxs:Error: Command failed with rc=8323072 . make: *** [mod_wsgi.la] Error 1 mod_wsgi 3.2 Apache 2.2 Python 2.6 apr-1.2.7-11 Is this error because of a missing package.. or else how do I solve this issue?

  Read the article

• Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

  - by William Hooper

  My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

  Read the article

• Is there a convenient way to manually copy the Log Shipping *.trn files from one SQL 2008 server to

  - by Rick

  We have a remote SQL 2008 server (ServerB) that needs to keep a warm (15 minute interval is OK) copy of production data (ServerA). ServerA is also SQL 2008. Log Shipping looks like it will do the job. We can only get to the destination ServerB with remote desktop. Is there a way to set this up when we can't get to both servers from one Management Studio? We want to be able to temporarily (until a VPN is setup between our network and the ServerB network) manually export a small .trn file, copy it via remote desktop to ServerB and then manually import those transactions from the .trn file. My supervisor says he saw a post saying this is possible. We were just trying to avoid doing a full database backup and copying that every time. Thanks in advance for any suggestions on this.

  Read the article

• "Verifying DMI Pool" hang caused by raid array..

  - by Ling

  Hi Experts, I have a problem, I obtained a new server with 4 hard drives (2 500 gig, 2 two TB), and an adeptec RAID card. I arranged them in two arrays with RAID 1 (500 gigs together as primary and the 2 TB drives for lots of data). When both arrays are configured, the server hangs while booting at message "Verifying DMI Pool", however if I remove the second array from the configuration the server boots fine. I have checked they are both on different channels, I have disabled all other peripherals from the boot menu and ensured the hard drive is #1. I have booted into the linux rescue mode and checked that it is reading both arrays fine. What else could be causing these problems? Thanks

  Read the article

• How do I share a complete XP disk so it can be seen from a Windows 7 system?

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

  Read the article

• iSCSI: LUNs per target?

  - by badnews

  My question relates specifically to ZFS/COMSTAR but I assume is generally applicable to any iSCSI system: Should one prefer to create a target for every LUN that you want to expose? Or is it good practise to have a single target with multiple LUNs? Does either approach have a performance impact? And is there some crossover point where the other approach makes sense? The use case is for VM disks, where each disk (zvol) is a LUN. So far we have created a a separate target for each VM; but a single target that contains all the LUNs would probably greatly simplify management... but we may need hundreds of LUNs per a single target. (And then possibly tens of initiator connections to that target)

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• Recommended service account setup for MS SQL Server 2005/2008

  - by boxerbucks

  We have a number of MS SQL servers in our environment running either SQL Server 2005 standard/enterprise or SQL server 2008 enterprise. Currently the SQL services are running as local service or network service and the MS recommended best practice is to run as a domain account which is what we are trying to move towards. Is the best practice with regards to domain accounts to have a separate domain account per service per server? So if we have 4 SQL services we want to run per server and we have 50 servers, we would create 50 * 4 = 200 accounts in AD? This seems excessive to me and I was wondering if anyone has any real experience with this type of setup and it's management.

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• After repairing permissions, Mac OS X won't boot

  - by Power-coder

  This morning I ran the Repair Permissions command from inside the Disk Utility. Ever since then my MacBook wont move past the splash screen when booting. I've revolted in verbose mode and I see that it is trying to repair the disk but then terminates with 'Unable to repair the volume'. Since then I have tried running the Disk Repair from the Snow Leopard install DVD and it quits with the same error. Is there a way I can repair this thing without reformatting and installing over again? How does something so simple as a permissions repair make the system unbootable like this?

  Read the article

• Can I run AD commands from a standard PowerShell script?

  - by Ben

  I am putting together a script to run post-sysprep. It should check if the machine is on the network, and if it is then it should query AD to see if a computer account exists with it's service tag (we're using these as the hostnames of the machines.) If it does exist, it should delete the account and rejoin the machine to the domain. I have got the majority of the script running, but need to run the following: Remove-ADComputer -Identity $distinguishedName How can I run this from the "standard" powershell environment? I don't want to use the AD module. (By the way - I'm on a mixed mode 2000/03 domain as we are in the process of upgrading to 2008) I'm new to PowerShell so be gentle if I'm completely missing the point! Thanks, Ben

  Read the article

• Securing RDP access to Windows Server 2008 R2: is Network Level Authentication enough?

  - by jamesfm

  I am a dev with little admin expertise, administering a single dedicated web server remotely. A recent independent security audit of our site recommended that "RDP is not exposed to the Internet and that a robust management solution such as a VPN is considered for remote access. When used, RDP should be configured for Server Authentication to ensure that clients cannot be subjected to man-in-the-middle attacks." Having read around a bit, it seems like Network Level Authentication is a Good Thing so I have enabled the "Allow connections only from Remote Desktop with NLA" option on the server today. Is this acion enough to mitigate the risk of a Man-in-the-Middle attack? Or are there other essential steps I should be taking? If VPN is essential, how do I go about it?

  Read the article

• Emacs doesn't load gui.

  - by D Connors

  Hi, whenever I run emacs or emacs23 on terminal I just get the following output: ** (emacs:2620): CRITICAL **: menu_proxy_module_load: assertion `dbusproxy != NULL' failed And the gui doesn't load, and emacs' window never opens. The emacs process doesn't actually crash (the terminal stays busy, and I can see the emacs23 process running with ps -e). I've tried running it with the -D --debug-init arguments, but the same thing happens and the output is exactly the same. However, if I run emacs -nw it successfully runs emacs in terminal mode as if nothing were wrong. Strangely, this problem only started happening the second time I ran emacs today. The first time it worked perfectly fine. Since then, I've tried rebooting and I've tried purging the emacs installation, to no success. I haven't installed any new packages today, but I might have upgraded some, could that be the reason? Is there a way to find out which packages were installed/upgraded today? Thanks I'm running Ubuntu Lucid

  Read the article

• IBM PS/2 Keyboard with OS X 10.6 and PS2->USB Converter

  - by public static void

  Just got a new Mac Pro at work and as I can't stand the ZX Spectrum-esque 'dead flies' feel of the new Apple keyboards, I brought my trusty IBM SpaceSaver II to the office (with a USB/PS2 adapter) All seems generally to work ok - even the Trackpoint 'nipple' but periodically the modifier keys, notably the Ctrl and Windows keys seem to go into 'sticky' mode so that typing an 'S' brings up the save dialog, 'O' = open dialog etc. etc. Its generally fixed by switching windows and then returning back to the offending one, but this is really beginning to cheese me off. Can anyone suggest a fix?

  Read the article

• Using keyboard specific keyboard-layouts in OS X

  - by Patrick O'Doherty

  I use a Kinesis Advantage with my MacBook Pro. While I use the dvorak layout when using the MBP's built-in keyboard the Kinesis has its own internal dvorak mode which assumes the host computer is using QWERTY. Is it possible to have OS X change the keyboard layout depending on which keyboard is currently being used? As far as I am aware this is possible on linux systems with HAL support but I haven't been able to find any support docs for OSX that advertise this ability. Thanks!

  Read the article

• How likely can my data be recovered after Windows CHKDSK performed on a degraded RAID 5 array?

  - by chrisling106

  Hello there, We have a RAID 5 setup with 3 SATA disks, #2 went down as reported on the pre-POST screen. Unfortunately, for some reason out of my control, the system was rebooted with a degraded RAID :-O Windows XP (64-bit) loaded, CHKDSK ran automatically and done its recovery! From that point onwards, the following error prompts every time even in Safe Mode: lsass.exe - The endpoint format is invalid I took those 3 disks to the data recovery expert and need to wait at least 2-4 days for results. There are 2 VMs on multiple files stored in this RAID 5 array, and there's no backup! Sorry, I just inherited the system from an ex-staff who has left the company 2 months before I joined. How likely the data can be recovered?

  Read the article

• Opening tabs in Google Chrome crashes my system

  - by David Golding

  When I open tabs to sites such as BBC iPlayer I have about a 4/5 chance that it will crash my entire system. The system can remain unresponsive for up to 30 mins or as little as 2. This has only happened recently and is becoming very annoying as the rest of my system can be running perfectly fine then I open a tab and it hangs. It isn't always flash media webpages so I have ruled that out and I have check my addons opened them in incognito mode, done all the usual error checking.

  Read the article

• how to run an AFS file server on a specific ethernet card (in Debian)

  - by listboss

  I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

  Read the article

< Previous Page | 560 561 562 563 564 565 566 567 568 569 570 571  | Next Page >