Search Results

Search found 22546 results on 902 pages for 'mode management'.

Page 559/902 | < Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >

• how to fix asyncmac.sys infection

  - by Jay

  AVG anti-virus tells me that there is a virus in my asyncmac.sys. I tried to overwrite it with a copy of asyncmac.sys from another computer (making sure that it was the same version of Windows XP, but I was still nervous that I was going to break something), but when I reboot, I get the same virus warning. If I try to delete the file Windows (or somebody) automatically and immediately puts it back. I get a blue-screen death if I try to boot in safe mode. I tried to do a system restore to before I had the virus, but it tells me that it can't restore because nothing has changed. Any suggestions on how to fix this?

  Read the article

• Re-assembling the RAID-5 array reboots my CentOS-5 machine

  - by xraminx

  I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

  Read the article

• Why is VMware vSphere Client hanging at the console?

  - by David

  When I use the vSphere Client (against an ESXi 4.1 server) it hangs a lot. It's always at the same place - using the console on a VM. The console stops responding - and a lot of times, the management window stops responding as well. The operating system won't close the window (as the application isn't responding) and requires a force close. I've had the console refuse to give up the mouse, and have had the console freeze with the cursor in the top left (before any VM software starts, maybe?). The environment is this: the system is a Dell laptop running Ubuntu 10.10 (Maverick) fully updated with VirtualBox OSE running Windows XP (also fully updated). The vSphere Client is running in the Windows XP VM. Got all that? How do I keep these hangs from happening? It is very aggravating. I'm still trying just to get the VM loaded with Ubuntu Server...

  Read the article

• TIME column in TOP command for mysql

  - by michael

  When I run top on my database server I get that mysqld has been running for 4:00.51 and it continues to go up. I assume this means that one process with mysql has been running this long from other posts on here. Its not set to cumulative mode as best I can tell as the heading looks like it would change to CTIME if that be the case. What I'm wondering is if this is normal for a site that makes a lot of individual connections using PHP. I shouldn't have any long running processes that would hold on to a mysql connection for this long, only seconds at most. Am I incorrect to assume that this time relates to one connection/process running? I think usually I see it flash up and away on the TOP, not just stay there with this number increasing.

  Read the article

• Set up proxy for vpn server on ubuntu server 12.4

  - by Morteza Soltanabadiyan

  I have a vpn server with HTTPS, L2TP, OPENVPN, and PPTP. I want to set up a proxy on the server, so all connection that comes from vpn clients, they will use that. I created the following bash script file for it, but the proxy isn't working. gsettings set org.gnome.system.proxy mode 'manual' gsettings set org.gnome.system.proxy.http enabled true gsettings set org.gnome.system.proxy.http host 'cproxy.anadolu.edu.tr' gsettings set org.gnome.system.proxy.http port 8080 gsettings set org.gnome.system.proxy.http authentication-user 'admin' gsettings set org.gnome.system.proxy.http authentication-password 'admin' gsettings set org.gnome.system.proxy use-same-proxy true export http_proxy=http://admin:[email protected]:8080 export https_proxy=http://admin:[email protected]:8080 export HTTP_PROXY=http://admin:[email protected]:8080 export HTTPS_PROXY=http://admin:[email protected]:8080 What to do to make a global proxy for server and all vpn clients to use it automatically?

  Read the article

• OpenVPN Bridge on pfsense: once LAN pings clients, connectivity breaks

  - by Lucas Kauffman

  So I'm using a pfsense openvpn to bridge my LAN segment so VPN users can access the servers. The problem I'm having now is that I can establish a connection, I can ping the LAN server from the VPN, but as soon as I ping the client from the LAN server, there is no connectivity anymore between both parties. So: connect from the VPN client to the LAN = works ping the LAN from the VPN client = works access server from the VPN (ssh, ftp,...) = works ping client from server = doesn't work ping LAN from the VPN client = doesn't work anymore My bridge has em1 and ovpns1 bridged. I noted with tcpdump that ICMP is reaching the bridge between LAN and the VPN segment. But it's not put onto the em1 interface for some reason. My pfsense is running on an ESXi host with th vSwitch port enabled in promiscious mode. Firewall rules allow in and outbound traffic regardless origin or destination.

  Read the article

• Changes user's email on crowd doesn't apply in confluence

  - by donamir

  Hi It's my configuration: Atlassian Crowd Version: 2.0.2 (Build:#409 - 06-10-2009) Atlassian Confluence 3.0.2 I can't change users' emails in Confluence because I use Crowd as external user management. So I have to change users' emails in Crowd but changes doesn't apply in Confluence. Even users has access to crowd user console and can login to Crowd and view their profile and edit their email password but changed emails doesn't apply in Confluence. What should I do? Is it a bug? Also I should mention that emails contains dot character(.). I posted my question to Atlassian forum 3 days ago but there's no answer yet!

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• dhclient configures /etc/resolv.conf with invalid entry

  - by kubal5003

  I'm trying to figure out why running dhclient on my interface sets /etc/resolv conf to the ip number of my gateway(router). This entry is invalid and each and every time causes inability to resolve any address. I would like to: stop dhclient from overwriting the /etc/resolv.conf or make dhclient write there the valid dns ip from my router More on the environment: I'm using virtual Debian Wheezy as a client system on Windows Seven x64. It is run by Virtualbox with networking mode set to bridged (all packets from debian are injected to my network interface on windows). If I manually configure the /etc/resolv.conf then everything works fine. Doing this on every boot is quite annoying.. PS I know I can write a script to do it for me, but this is not the solution I want. //edit router ip: 192.168.1.100 /etc/resolv.conf AFTER running dhclient eth0: "nameserver 192.168.1.100" what I would like the /etc/resolv.conf to look like: "nameserver 89.202.xxxx" (I don't have to provide the real ip do I? )

  Read the article

• idle proccesses and high memory bad? uwsgi/django

  - by JimJimThe3rd

  I have a VPS with 256MB of ram. I'm running nginx, uwsgi and postgresql on Ubuntu 12.04 for a soon to be Django site. About 200MB of ram are being used despite the website not being active, the uwsgi processes seem to just be idling. Is this bad? I once heard that having a bunch of free memory isn't necessarily a good metric because it is possible that the memory in use can easily be freed up. I mean, it is possible that the server is storing commonly used "stuff" in case it is accessed but is more than happy to dump it if the ram is needed. But I'm really not sure, hence me asking this question. If it is bad I could set some of the application loading options for uwsgi like "cheap" or "idle" mode. Screenshot of my htop

  Read the article

• CURL on PHP 5.2 works in CLI but not in IIS

  - by Ben Reisner

  I have a Windows 2003 Server running IIS with php 5.2.8, I'm trying to use CURL, and it works in CLI mode (if i execute php.exe) but it does not seem to be registered when running under IIS. The output of PHP info in both CLI and IIS show the same 'Loaded Configuration File', but under IIS it does not give the CURL info box. c:\program files\php\php.exe -i shows ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... curl cURL support => enabled cURL Information => libcurl/7.16.0 OpenSSL/0.9.8i zlib/1.2.3 phpinfo() ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... NOTE: This server also runs php 5.3 in c:\program files\php-5.3.0 and CURL does properly work with that installation.

  Read the article

• Can't use sudo on ubuntu

  - by martin.malek

  After update and reboot I get 'user is not in the sudoers file. This incident will be reported.' when trying to call sudo. The problem is that I don't have a GRUB with revovery option. I try to boot from live cd but I'm not able to access the system partition, only the partition with grub. Can I somehow enable the recovery mode in GRUB? Or boot throw the live CD from first hard drive with some option for that?

  Read the article

• Need help diagnosing cause of BSOD

  - by n00neimp0rtant

  I've got a Windows 7 PC here that was getting very frequent BSODs. The error codes were variant (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NONPAGED_AREA, ATTEMPTED_WRITE_TO_READONLY_MEMORY), and it was impossible to use the computer for longer than an hour without getting one. I backed it all up and reinstalled Windows completely, thinking that it was a corrupt driver issue. Unfortunately, I'm still getting the BSODs with the same error messages on this fresh installation. This tells me that it must be some faulty piece of hardware, but I'm not sure what it would be. I ran Memtest+ on the machine, but did not get any errors after 2 passes. I also ran a few built-in recovery mode scans from the HP recovery partition. I need some ideas on how to test the rest of the hardware to solve this issue.

  Read the article

• 1000 HZ linux kernel necessary if I have tickless and high resolution timer?

  - by Bob

  I am trying to improve performance on my server. I have a few processes that need low jitter (less than 10ms variance). I have a load average of 4 maximum on an i7-920 (4 physical cores, 8 with HT). There are about 10 processes ranging from 40% to 90% of a core user mode. System usage is 3% total. Total CPU usage is 80% max. Will setting the kernel from 100hz to 1000hz improve the jitter if tickless and high resolution timers are already set? This page seems to indicate it still does something. https://lkml.org/lkml/2009/4/28/401 How about changing from voluntary (PREEMPT_VOLUNTARY) to preemptible (PREEMPT)?

  Read the article

• Microsoft Outlook x Lotus Notes in enterprise environment

  - by Ladislav Mrnka

  I'm working in company (several thousands client computers) using tools like MS Outlook + Exchange + Sharepoint + Communication server. Now our mother company shared the idea that everything should be moved to IBM Lotus Notes + Domino. The reason for this is that Outlook based solution is too expensive (it is the official statement even they don't want to replace MS Office yet). Other reason probably is that they received a lot of licences for Lotus when they bought IBM servers to new data center. My question is: Is this reasonable change or is it just some management game and IBM's marketing? Will it really save money? Other question: Is Lotus better then MS solution? This is serious question, it is not mentioned to open any kind of flame war. I just don't believe the decission and I have never used Lotus tools.

  Read the article

• task scheduler won't wake the computer

  - by valya

  I want my computer to start uTorrent at 4 o'clock in the morning, when I'm asleep. But the computer is a bit noisy so I put it to sleep mode every time I go to bed. I've tried creating a task in Task Scheduler with this parameters: Run whether user is logged in or not Daily At 4:00 every day Start a program "C:\Program Files\uTorrent\uTorrent.exe" Wake the computer to run this task I've tried to change the time to run to make sure the computer wakes up and runs uTorrent. But it doesn't. What am I doing wrong? Maybe I've lost something?

  Read the article

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• Load Balancer recommendations

  - by delerious010

  I provide hosting service for about 250 clients to date, and this is increasing on a monthly basis. For each client, I have 2 "services" configured for L4 balancing / persistence .. one on port 80, another for port 443 which redirects to another internal port as well as 4 servers per service. This equates to a total of 500 "services" and 2000 "servers". I'm currently running with a couple CoyotePoint load balancers, and have had a look at some Barracudas but so far I'm really not impressed by those. Could anyone recommend some good load balancers which would be able to support this sort of load ? And which offer a good API, or shell access to automate management.

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Sharing storage on Linux and Solaris

  - by devlearn

  I'm looking for a solution in order to share a san mounted volume between several hosts running on Linux (RHEL) and/or Solaris (Sparc). Note that I basically need to share a set of directories containing large binary files that are accessed in random R/W mode. I have the following reqs : keep the data on the SAN suitable i/o performances as the software is pretty demanding on IOPS stick to a shared file system as I can't afford a cluster fs (lack of MDS/OSS infrastructure) compression could be really usefull For now I've found only the following candidates : GFS2 , supports Linux only, no compression VxFS , supports Linux and Solaris, compression supported So if you have some suggestions for this list, I'll really welcome them. Thanks in advance,

  Read the article

• Mac .flac player that organizes folder structure? Can Songbird write to a ntfs drive?

  - by CT

  I have a bunch of music in .flac format on my pc. I would like to put that music on an external drive which I can access from both my Mac and PC at work. I have the drive formatted in NTFS using MacFUSE and NTFS-3G drivers. Through Finder I write to the drive fine. If I go to Show Info I see that I have custom access. I am trying to use Songbird to play said .flac files. I have Folder Management turned on. When I try to import to Library it errors out and says make sure drive exists and is writable. This seems like a permissions issue but I do not see how I could change them. If anyone knows of a good .flac player for the mac that also organizes folder structures like iTunes please let me know. This and the ability to write to a NTFS drive is what I am looking for.

  Read the article

• Internal LTO tape drive becomes hot

  - by claasz

  We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

  Read the article

• Windows XP Pro SP3 stop error code 0x000000F4

  - by Andrew Ford

  I have a system running Windows XP Pro SP3. My wife is the primary user of this system, and the last several days in a row, when she tries to log in to the system it gives her a BSOD with the stop error code 0x000000F4. The rest of the error codes change every time she tries to log on, but that one seems to stay constant. The error it gives me is: A process or thread crucial to system operation has unexpectedly exited or been terminated. The machine will also get stuck in a boot loop, where it keeps giving me the screen saying that windows did not start successfully, and to choose how to start windows. I have tried Safe Mode, Last known Good Config, and Normally, and all have resulted in either a return to the boot loop, or BSOD. What might this mean? How can I fix it, without doing a clean install?

  Read the article

• Input not supported message when monitor is powered off then back on

  - by Jason Down

  I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

  Read the article

< Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >