Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 564/693 | < Previous Page | 560 561 562 563 564 565 566 567 568 569 570 571  | Next Page >

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • Mail not piping in postfix

    - by user220912
    I have setup a postfix server and wanted to test the piping of mail to my perl script where i can make use of it and filter the mails.I wrote a test script for that which just logs the information in txt file. but i don't see any changes on sending the mail. My postconf-n output: alias_database = hash:/etc/aliases append_dot_mydomain = no command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = yantratech.co.in, localhost.localdomain, localhost myhostname = tcmailer8.in mynetworks = 103.8.128.62, 103.8.128.69/101, 168.100.189.0/28, 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES recipient_delimiter = + relayhost = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/pki/tls/certs/tcmailer8.in.cert smtpd_tls_key_file = /etc/pki/tls/private/localhost.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes transport_maps = hash:/etc/postfix/transport virtual_alias_maps = hash:/etc/postfix/virtual virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = /etc/postfix/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000 here's my transport: [email protected] email_route my main.cf declaration: transport_maps = hash:/etc/postfix/transport my master.cf declaration: email_route unix - n n - - pipe flags=FR user=nobody argv=/etc/postfix/test.php -f $(sender) -- $(recipient) and my php script: #!/usr/bin/php <?php $fh = fopen('/etc/postfix/testmail.txt','a'); fwrite($fh, "Hello it works\n"); fclose($fh); ?> I am sending mails through telnet in localhost.

    Read the article

  • How can I remotely display images on my computer?

    - by Jakob
    What I Have: A laptop booted with Ubuntu and a stationary computer dual-booted with Ubuntu and Vista, both connected through a wireless ad-hoc network. What I Want: I want a way to display images in fullscreen on my stationary, using my laptop as a "remote control". I want to be able to choose another picture at any time and have my stationary computer remain in fullscreen mode at all times. Preferably, I should also be able to display just an empty (black) screen. How can I arrange for this? What I Have Tried: I have tried simply SSH:ing into my stationary computer and opening the image files using an image viewer, but all of the ones that I have tried (Eye of Gnome, Mirage, Gwenview, and others) open a new window for every new image. I don't know how to force them into using a single instance. I have tried using the VLC remote control command line interface, but apart from seeming somewhat unreliable (exiting with segmentation faults at one point), it also displays some images with a green border and forces me to pause playback in order for the image to remain on screen. Bonus Question: In my final setup, I also need to play music through my stationary computer's speaker and have the ability to switch to another track at any point, like with the images. Preferably, I would like to control the images and the audio through the same interface. How can I best achieve this?

    Read the article

  • How to Set up MySQL Server to utilize more memory

    - by Cyril Gupta
    Hi there, I have MySQL setup on Windows along with Plesk. The version is 5.0.45 Community. The databases I have on the server are MyISAM as well as InnoDb, but predominantly innodb. I had 8G memory on my server, but MySQL isn't going up more than 1.3G and tweaking the settings isn't helping. I tried to increase the memory allocation for innodb_buffer_pool_size, it works if I set it up to 1G, but if I set 2G, or above the server doesn't come back online! I want mySQL to use at least 5-6 Gigs of the memory I have for performance, but I can't get this to work. Can anyone please help? My mysql config file is below (there are 2 mysqld sections... when i used MySQL workbench it created another one!) [MySQLD] port=3306 basedir=C:\\Program Files (x86)\\Parallels\\Plesk\\Databases\\MySQL datadir=C:\\Program Files (x86)\\Parallels\\Plesk\\Databases\\MySQL\\Data default-character-set=latin1 default-storage-engine=INNODB query_cache_size=128M table_cache=1024 tmp_table_size=32M thread_cache=32 myisam_max_sort_file_size=100G myisam_max_extra_sort_file_size=100G myisam_sort_buffer_size=2M key_buffer_size=32M read_buffer_size=16M read_rnd_buffer_size=2M sort_buffer_size=8M innodb_additional_mem_pool_size=24M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=10M innodb_buffer_pool_size=1G innodb_log_file_size=10M innodb_thread_concurrency=8 max_connections=700 key_buffer=48M max_allowed_packet=5M sort_buffer=2M net_buffer_length=4K old_passwords=1 wait_timeout=20 connect_timeout=60 [client] port=3306 [mysqld] query_cache_min_res_unit = 4096 innodb_additional_mem_pool_size = 1048576 innodb_buffer_pool_size = 1G query_cache_limit = 1048576 key_buffer_size = 8388608 sort_buffer_size = 2097144 query_cache_type = 1 query_cache_size = 312M log-slow-queries connect_timeout = 5 wait_timeout = 20 thread_cache_size = 15 read_buffer_size = 131072 table_cache = 64

    Read the article

  • Best Asp.net Hosting

    - by dotnetguts
    There are many asp.net web hosting companies which spends lot on advertisement and also gives you very cheaper rate, as low as $5, but when it comes to support they are simply hopeless. Everyone can you please pass your experience with your past hosting companies and suggest any good asp.net hosting company? Please consider following requirement factors 1) Asp.net 3.5 or 4.0 supported. 2) Url Rewriter support 3) GZip support (Dynamic through code) 4) Initial Setup support (If required) 5) SQL Server 2005 or 2008 6) Allow to access SQL Server DB using SQL Mgmt Studio 7) Environment supporting Backup and Restore of DB on my own, without involving tech support team 8) Full Text Search support 9) FTP support 10) I can able to send atleast 500 Emails daily. 11) 99.9% Up Time (No matter all web hosting say they have 99.9% Up Time, but its not true). 12) Alert Email to be sent when they do any maintenance or during downtime. 13) Hosting Price should be reasonable. Incase you feel i am missing something please add to the list. Can anyone suggest good webhosting company based on above factors?

    Read the article

  • Turn computer into DAS (Direct Attached Storage)

    - by Damon
    Can we build a direct attached storage by taking a computer/server, adding an HBA, and installing some appropriate software? We would use Debian as a host OS for both the DAS and the server. If so, what software do we use? And do we simply need a HBA for the DAS and the Server? Or do we need more hardware? The goal is to use an older server that does not have enough room for drives but does have ECC memory, server processors, redundant power supplies, dual nics, etc. Then find any boxes, server or not, the key being having enough room for 8-12 drives, fans, etc. and turning them into a DAS; build two of these DAS's and have them connected to the server. Eventually we want to have two servers using DRBD and associated services like heartbeat and pace maker to create an HA setup for our server(s) but that will take a long time to configure since I have no experience with anything related to DRBD (yet) and have a learning curve I have to get past, not to mention the additional cost of more hardware (two servers vs one).

    Read the article

  • Automated Syslog Error Solution Finder

    - by Dru
    Any automated syslog solution finding frameworks? I want my central syslog server to email a list of problems, their severity and suggested solutions. There have been several questions about centralising system logs and alternative log analysis systems, but I don't get the impression that any of them help with issue resolution. A little background: At work I am now literally doing the work of two people, and both jobs have expanded beyond their initial frameworks. It is not so bad as I have helpers, but they are little more than smart monkeys. While one of my predecessors [I have two, that is how I know I have the jobs of two people] set-up logwatch to email its results out, my monkeys don't have the skills necessary to identify unimportant data. This has caused all of them, and myself sadly, to setup email filters and ignore the whole thing until something goes "bang". It would be handy to have someone else tell them what is important, what is connected, and to suggest a few ways to resolve the issue (I could train then to research the solution first, ha!). My reading of the Splunk and Octopussy sites indicates that I still need to bring my own highly trained monkey to the party. Which I am several years from having.

    Read the article

  • How do you initialize networking on a new Xen guest VM?

    - by Marten Veldthuis
    We have a Citrix XenServer setup, and while I personally lean more towards Dev than Ops, I've got an issue that's been bugging me. When you provision a new (Linux/Ubuntu) guest, how do you get it to have the correct IP-address? I'd want my application servers to exist in the range of 10.20.0.0/24, preferably being .1, .2, etc, so I can keep my sanity. I guess that the actual IP-address is something set in Linux itself, and Xen can't touch that, but then what's the best practice for getting it done? If you set up DHCP, don't you just move the problem to getting the adapters the "correct" MAC-addresses? Do you just have to hardcode a large table of MAC-addresses to IP-addresses, and then provision new guests always with the correct MAC-address on the virtual ethernet adapter? What we currently do is have an image of a "app server" that we boot up a new instance of, and then finalize it (with a script) that (among other things) modifies the /etc/networking/interface file to give it the correct IP. But that feels dirty to me, and I feel like surely there must a better way. Please enlighten me?

    Read the article

  • Set up Linux box as WAP for MyBookLive?

    - by AcidFlask
    I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

    Read the article

  • Install MS Office on Windows Server 2008 - in support of Quickbooks RemoteApp

    - by steampowered
    How can I install MS Office on Windows Server 2008? The purpose would be to enable Quickbooks to be able to export to Excel. Quickbooks is set up to run as a RemoteApp in a Terminal Server environment. The Quickbooks applicaiton senses whether or not Excel is installed and will not allow the user to create an Excel report unless Excel is actually installed on the client running Quickbooks. Since the client and the server are the same machine in a Terminal Server environment, Excel must be installed on Windows Server for the Quickbooks Excel exporting feature to work in this setup. There is no need to actually use Excel in a Terminal Services environment. We only need to generate the Excel files using the server, then we can use an installed version Excel on a regular Windows 7 machine to work with the Excel file. MS Office does not normally install on Windows Server. Is there any way to buy a special license? Could we somehow fool Quickbooks into thinking Excel is installed, if that would work?

    Read the article

  • Using Samba to share a folder from a Linux guest with a Windows host in VirtualBox

    - by AmV
    I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and I need more information on how to proceed. So far, I managed to set up two network adapters (one NAT and one host-only) and install Samba on the Linux guest, but now I have the following questions: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that need to be executed on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this? Thanks!

    Read the article

  • Intermittently uncommunicative subnets

    - by mhd
    Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

    Read the article

  • Unable to connect to server after a certain amount of time

    - by Troy
    I am a business FIOS subscriber with 5 static IPs. I have the following network setup: Verizon provided ONT Dlink switch Dell server running Ubuntu 12.04 with iptables enabled and a static IP address. The makes/models of hardware are: FIOS ONT Alcatel-Lucent I-211M-H ONT D-Link D-Link Web Smart Switch DES-1228P Server Dell Optiplex 755 (Ubuntu 12.04 Server) I have iptables running on the server with http, https and ssh ports open. I can connect to a website on the server from an external computer, but after a certain amount of time (mins to hours), I can no longer connect. All I have to do to re-enable connectivity is connect to the server via SSH from a computer INSIDE the network. I don't have to actually login, I just have to establish a connection. I can then access the website externally again. I did some googling and it seems some of verizon's equipment had an ARP bug where the ARP entries would expire after a certain time period, but those issues all seem to be from back in 2009 - 2010. I know the switch has an 'auto learning Mac address' feature, but I'm not sure if that could be the problem or not. Does anyone have any ideas or advice on how I can troubleshoot this? Thanks!

    Read the article

  • ProCurve ACL to prevent a subnet from leaving the switch

    - by kce
    I have a single HP ProCurve 2610 in a remote location that is connected in with the rest of the network via SHDSL. There are two Layer-3 networks on this segment. ACLs are setup to deny one subnet (192.0.2.0/24) from ever being able to leave the switch by virtue of being applied to port attached to the upstream connection. The other subnet should be permitted to freely leave the switch. Both subnets are on the same VLAN. Unfortunately SFlow very clearly show broadcast traffic from 192.0.2.0/24 on the upstream connection. ProCurve ACLs are not my strong suit but I feel like I'm missing something very simple here. ip access-list extended "Filter for Camera Network" deny ip 192.0.2.0 0.0.0.255 0.0.0.0 255.255.255.255 log permit ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 exit interface 24 name "DSL - UPLINK" access-group "Filter for Camera Network" in exit Unless I am mistaken traffic from 192.0.2.0/24 should be dropped as it crosses the uplink port (int 24) whereas all other traffic will be permited by the following default allow rule. What exactly am I missing here? EDIT: Firstly, why do you have two subnets contained in the same VLAN? Because that's how it was configured by a previous administrator and while it makes conceptual sense that a single subnet is "mapped" to a single VLAN there's no technical constraint that I am aware of that makes this have to be the case. Instead of filtering inbound traffic on your uplink, you should be filtering outbound traffic. The HP2600 series can only filter inbound traffic on interfaces. Should I change my filter to deny any to 192.0.2.0/24?

    Read the article

  • Removing extended partition without deleting logical in it

    - by HisDudeness
    I'm running a Linux-based laptop, and in order to multi-boot several distros in it, I created an extended partition which contains a bunch of logical ones with GParted. Now, after quite a long time with this setup, I've changed my mind because of the consequent lack of storing space for my data partition. Now I want to keep one distro alone like it's normal, and eventually have some other operating systems stored in external supports to plug in and use if I want. Obviously, also this partition I want to keep (and to enlarge a little too) is just a logical inside the extended I want to keep. For what concerns the number I'm ok, meaning I currently have this big distro dedicated extended, the swap and the data partitions, so there's space for another primary before I delete the extended, but I don't know how to delete it without touching the logical in it, I don't want to reinstall the system losing all changes and settings, and I don't want to keep an extended partition for a logical alone. How can I do? Do I have to create a new primary, copy the logical content in it and then delete everything? Will the system boot and maintain exactly all the features it has now? Or is there a way to convert an extended into a primary once it contains just one logical? Or can I directly move a logical out of an extended turning it into a primary? Or, again, am I screwed?

    Read the article

  • Roundcube "Server Error (OK!)": Lists no messages but can get messages according to the log file

    - by thonixx
    In my server setup there are three virtual machines. One windows machine, an Ubuntu Server 11.10 and a Debian Squeeze mailserver. On the Ubuntu system I have Roundcube installed and I want to connect to the virtual mail server. What's the problem After login into Roundcube it says "Server Error (OK!)" and lists no messages. More information On the Ubuntu server there is no error in any log file (even Roundcubes log files). In the imap log file there you can see Roundcube is able to fetch all imap messages (I can see them in the imap log file created by Roundcube). And on the side of the mail server there are no error messages too. The test connection at the end of the configuration of Roundcube works too, there is a "success" notification. Even the basic login at Roundcube login dialog works without any error message. Roundcube log file you can look here for the log file: http://fixee.org/paste/wxg36eh/ So does anyone know what's wrong with Roundcube?

    Read the article

  • Migrate Maildir between courier and dovecot servers

    - by DeaconDesperado
    I have several tarballs that make up all the previous emails for two or three accounts on a mail server. This machine we be shut down within a few weeks and so I need to migrate all the previously subscribed IMAP folders to the new server. The old machine ran Dovecot with exim and delivered all mail to a virtual user folder on the server in maildir format. The new machine uses courier and postfix, also configured to deliver through maildir. The new server is already setup and all clients are successfully logging in, the problem is migrating their old conversations. I've tried moving the old message files directly and deleting the imap db that records which messages have already been fetched, but nothing has been successful. The outlook clients present an error for every message saying that the "message can no longer be located on the server." Keeping the files chronologically sorted is not an object, I just need to migrate the old conversations over. Is there a way to do this in a batch operation that will allow the clients to login to the new server and treat these old messages as though they were new? What is the protocol for this kind of migration?

    Read the article

  • How can I avoid permission denied errors when attempting to deploy a rails app with capistrano?

    - by joshee
    Total noob here. I'm attempting to deploy an app through Capistrano. I'm getting relentless permission denied errors when I attempt to run cap deploy:update. Seemingly at least some of these errors are due to missing directories that trigger a "Permission Denied" error. (I'm doing setup on root just temporarily.) set :user, 'root' set :domain, 'domainname.com' set :application, 'appname' # adjust if you are using RVM, remove if you are not $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require "rvm/capistrano" set :rvm_ruby_string, '1.9.2' # file paths set :repository, "ssh://[email protected]/~/git/appname.git" set :deploy_to, "/var/rails/appname" # distribute your applications across servers (the instructions below put them # all on the same server, defined above as 'domain', adjust as necessary) role :app, domain role :web, domain role :db, domain, :primary => true set :deploy_via, :remote_cache set :scm, 'git' set :branch, 'master' set :scm_verbose, true set :use_sudo, false set :rails_env, :production namespace :deploy do desc "cause Passenger to initiate a restart" task :restart do run "touch #{current_path}/tmp/restart.txt" end desc "reload the database with seed data" task :seed do run "cd #{current_path}; rake db:seed RAILS_ENV=#{rails_env}" end end after "deploy:update_code", :bundle_install desc "install the necessary prerequisites" task :bundle_install, :roles => :app do run "cd #{release_path} && bundle install" end Here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/shared/cached-copy'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly I'm able to ssh without a password, so not sure about that publickey error. By the way, if I run cap deploy:update without set :deploy_via, :remote_cache, here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/releases/20120326204237'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly command finished Thanks a lot for your help with this.

    Read the article

  • Using wildcard domains to serve images without http blocking

    - by iopener
    I read that browsers sometimes block waiting for multiple images from the same host, and I'm trying to do everything I can to speed up page load times. One caveat: I need to serve files over HTTPS. Any opinions about whether this is feasible: Setup a wildcard cert for *.domain.com. Whenever I need an image, generate an number based on a hash mod 5 of the filename, and append it to an 'img' subdomain (eg img1.domain.com, img4.domain.com, img3.domain.com, etc.); the hash will make any filename always use the same subdomain, and therefore the browser should be able to cache the images Configure a dynamic virtualhost record to point all img#. subdomains to /var/www/img I am looking for feedback about this plan. My concerns are: Will I get warnings when my page has https:// links to multiple subdomains? Is the dynamic virtualhost record I'm talking about even possible? Considering the amount of processing this would require, is it likely to even produce any kind of overall benefit? I'm probably averaging a half-dozen images per page, with only half being changed on each page refresh. Thanks in advance for you feedback.

    Read the article

  • Adding subnet to a vsphere with single vcenter and esxi host

    - by Ilya Rakhlin
    Let me start of by saying that I do not specialize in networking, I am in the process of adding additional VMs to a testing environment and wanted some recommendations. In this case I am running a single ESXI 5.1 host and a single Vcenter management server. The problem is, I need another range of IP addresses added to the existing setup; hopefully without reconfiguring everything. Currently the esxi host is configured to IP: 192.168.100.200, gateway: 192.168.100.1 and subnet: 255.255.255.0. All of the VMs are running some version of linux with hard coded IP addresses in that range, and using that subnet. The VMs I am about to deploy I want to be on the 192.168.101.X network. Is it possible to add an additional subnet to this existing system that will also communicate with the current subnet? The esxi host has 6 physical NICs but only one connected as it is only a testing system; not sure if that matters. Are there any other ways to accomplish this hopefully without restarting or at least reconfiguring the IP addresses for each VM? Reason: Due to the configuration of the VMs to run the applications that we need I am using a large amount of the current IPs in the potential range (mostly VIPs). I will be setting up a new version of this “environment” while keeping the old one, thus potentially running out of IP addresses.

    Read the article

  • Disk usage on IIS, PHP5, performance problems.

    - by Jacob84
    Hi everybody, I'm quite worried with a performance problem that I'm facing in one of our production servers. I'm working for a hosting company, so you can imagine how heterogeneous the applications runnning here are. All started with a call of a client complaining about the speed loading a Joomla. The setup is IIS6 (Windows 2003) with PHP5 and FAST CGI wich normally works pretty well. I've tested the loading time and indeed, he was right. 7 or 8 seconds to load, when usually this can be accomplished in 2. Seeing this results, I started to check first CPU and RAM. Everithing normal, 2GB of RAM free, 3%-8% of CPU activity. That's what I call a relaxed server ;). Unfortunately, digging a little deeper I've found the 'PhysicalDisk' counters quite high (above 10), specially the read queues. I've used Process Explorer to see wich of those processes has the higher deltas, but everything seemed normal. As the problem is specially related to PHP pages, I've checked specific IIS counters, as Actual connections, Number of CGI requeriments and Number of ISAPI requeriments. CGI -> 3 to 7 ISAPI -> 5 to 9 Connections-> 90 to 120 (wich appears at the top of the graph) More than a solution (I know this is hard to find), I would like to know if you have an specifical methodology to face this kind of problems. Thanks a lot, as always.

    Read the article

  • MAMP Pro virtual hosts on Mountain Lion not being recognized

    - by user135242
    I'm running MAMP PRO 2.1.1 on OSX 10.8.1 and not having any luck getting Apache to recognize any hosts that have been set up in MAMP besides localhost. This only happens when trying to use port 80. When I switch to port 8888 everything runs fine. Mountain Lion's Apache has been disabled and I get no errors or warnings when starting MAMP and the servers. Any doc root I set for "localhost" runs without problem. Any other server name I define, however, results in "cannot connect" when viewing in Chrome (not to be confused with "cannot find" - the browser is in fact following /etc/hosts to 127.0.0.1, but MAMP's Apache is simply not responding) I was wondering if anyone else has run into this issue or knows how to solve it. I'm working on some WordPress development and it keeps wanting to redirect to the base URL (with no port reference) even during setup. I'm sure I could fix things from the WP side but I'd rather figure out what the root issue is with MAMP. Thanks in advance for any insight you can provide.

    Read the article

  • Access server using IP on another interface

    - by Markos
    I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

    Read the article

  • How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

    - by Boris Okun
    The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

    Read the article

  • VMWare ESXi 5 - Expanded RAID 5 array - cannot access datastore

    - by Dayton Brown
    I'm using VMWare ESXi 5 and had a 2 TB RAID 5 setup on an HP DL360 with a P400i RAID card. I added two more 1 TB drives and using the SmartStart ACU, added the drives and expanded the logical disk. Now after booting back to ESXi, the server boots, but lists no available persistent storage. I've rescanned multiple times to no avail: the Datastore doesn't show up. I booted to GParted and the 1.8TB partition shows up, but it shows as unknown. Anyone have any good ideas? EDIT: Final Solution So after much gnashing of teeth, it was fairly simple to solve. I purchased an eSata 2 TB external drive and a PCI eSata card for my server. I then used Clonezilla to image the current partitions to my new external drive. You have to check "don't check drive sizes" in advanced mode, otherwise it will yell at you for have a smaller drive. For some reason my PCI card wouldn't boot on my HP server, so I hooked the drive up to another desktop I had, booted to VMWare, and copied the vmdk's to another drive. I'm going to blow out the RAID config and then create 1.5TB logical drives.

    Read the article

< Previous Page | 560 561 562 563 564 565 566 567 568 569 570 571  | Next Page >