Search Results

Search found 21719 results on 869 pages for 'password security'.

Page 569/869 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

• Can't perform ODBC connection to MySQL server on local network

  - by Emmanuel

  I have a wamp server running on LAN ip address 192.168.1.101 . From the browser on my PC which is on the LAN I can access the webserver and have as well set the phpmyadmin.conf file to be able to access the phpmyadmin interface. This works smoothly. On the wamp server I have a database which I'd need to access from any PC on the LAN using the MySQL Connector/ODBC. The problem is that I do not manage to setup the connection correctly. Here are the paramenters I use: Data Source Name: test_connection Description: test conenction Server: 192.168.1.101 Port: 3306 User: root Password: Database: The error message I get is the following: Connection Failed: [HY000][MySQL][ODBC 5.1 Driver]Can's connect to MySql server on '192.168.1.101' (10060) Would anybody have a hint to set up correctly the connection?

  Read the article

• Multiple External IP Ranges on a Juniper SSG5

  - by Sam

  I have a Juniper SSG 5 firewall in a datacenter. The first interface (eth0/0) has been assigned a static IP address and has three other addresses configured for VIP Nat. I have a static route configured at the lowest priority for 0.0.0.0/0 to my hosting company's gateway. Now I need to configure a second IP block. I have the IPs assigned to the second interface (eth0/1) which is in the same security zone and virtual router as the first. However, with this interface enabled I (a) can't initiate outbound sessions (browse the internet, ping, DNS lookup, etc) even though I can access servers behind the firewall just fine from the outside and (b) can't ping the management IP of the firewall/gateway. I've tried anything I can think of but I guess this is a little above my head. Could anyone point me in the right direction? Interfaces: ethernet0/0 xxx.xxx.242.4/29 Untrust Layer3 ethernet0/1 xxx.xxx.152.0/28 Untrust Layer3 Routes: http://i.stack.imgur.com/60s41.png

  Read the article

• Puppet nodes cant' find master, ec2 public versus internal ip addresses and hosts files

  - by Blankman

  If I setup my hosts files such that they reference all other ec2 nodes using the internal ip addresses, will this work or do I have to use the external ip addresses? Do I need to specify anything in my security group to get internal ip addresses to work? e.g. /etc/hosts ip-10-11-12-13.internal some_node_name If I do this, can I reference some_node_name anywhere in my scripts where I would have used the ip address previously? On my puppet agent servers, I have a reference to my puppet master like: public-ip-here puppet When I reboot my puppet agent's, syslog shows they couldn't find the master with the message: getaddinfo : name or service not known I did get it to work by updating /etc/default/puppet and I added to the options: --server=public-ip-here From what I read, puppet will by default try using 'puppet', and I set this in my hosts file so why wouldn't it be picking this up?

  Read the article

• 403 in Response to OPTIONS when updating working copy having full access

  - by user23419

  There is an SVN repository (single repository) http://example.net/svn The repository contains several projects (directories): http://example.net/svn/Project1 http://example.net/svn/Project2 User has full access to Project1 directory and has no access neither to root nor to Project2. Everything works fine for a while: user checks out http://example.net/svn/Project1, commits and updates it successfully. But sometimes trying to update leads to the following error: Command: Update Error: Server sent unexpected return value (403 Forbidden) in response to OPTIONS Error: request for 'http://example.net/svn' Finished! Why does TortoiseSVN request something in the root??? I have noticed that this happens after somebody else committed copy or move operation. Checking out http://example.net/svn/Project1 helps till next time... The main question: How to set up access rights for user to avoid these errors? Note, it's not an option to grant user any read or write access right on the root directory for security reasons.

  Read the article

• X11 tunnelling through SSH from Fedora 3 server to Windows Vista client fails to work.

  - by MiffTheFox

  Okay, I've tried using Xming and PuTTY, as well as Cygwin/X and Cygwin ssh, and it is not working. I've been able to run X applications locally, so it's not a client-side X problem. I've connected to the server using ssh -X user@server and ended up with this: local-user@client: ~$ ssh -X user@server user@server's password: Last login: Sun Jul 19 15:26:46 2009 from 192.168.100.147 [user@server ~]$ xclock & [1] 27770 [user@server ~]$ Error: Can't open display: localhost:10.0 [1]+ Exit 1 xclock [user@server ~]$ [user@server ~]$ Here's the relevant snippet of my sshd_config #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost yes I can't seem to find ssh_config on the client-side. /etc/ssh doesn't exist.

  Read the article

• Virtual machine won't connect to networking interface

  - by Keyo

  I have moved my virtual box hard drive (.vdi file) from windows7 on a laptop, to windows7 on a desktop. No big deal I thought. The OS is ubuntu 10.10. Now networking is broken. I don't have a solid understanding of windows networking, maybe someone can help. Anyway, the networking no longer works. I've tried to setup eth0. I have virtualbox setup in bridge mode, my wifi connection on windows to an intel card on the virtualbox side. I think it might be something to do with windows not allowing the connection to bridge properly (security issues). I've provided some screenshots, which will hopefully help.

  Read the article

• SSH with X11 forwarding to host where I don't have a home-dir

  - by Albert

  I am trying to ssh with X11 forwarding into a host where I don't have a home directory. Because of that, xauth fails and X11 doesn't seem to work. I tried to specify a home-directory in advance but I guess it doesn't export env-vars to the host. zeyer@demeter:~> HOME=/tmp ssh ares -XY Password: Warning: No xauth data; using fake authentication data for X11 forwarding. Last login: Mon Mar 28 11:52:57 2011 from demeter.matha.rwth-aachen.de Have a lot of fun... Could not chdir to home directory /home/zeyer: No such file or directory /usr/bin/xauth: error in locking authority file /home/zeyer/.Xauthority zeyer@ares:/> Is there any trick I can make the X11 forwarding work? I still have write access to /tmp. But I am not sure how to setup the xauth fake authentication data manually.

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• Cannot connect Office 365 email with Outlook 2010

  - by Dimitris

  I have an email address of the form [email protected] that I am accessing through this site. I had connected my email to Outlook 2010 and it was working fine. Recently, it started requesting credentials every time I logged in, without connecting to the email server even after entering the correct password. I had already decided to reinstall Windows 7, so I thought that would also fix this problem. Unfortunately it did not. I tried the troubleshoot function embedded in the Office 365 capabilities, but it did not find anything wrong. I suspect that one possible source of this problem could be the fact that in the control panel it states Mail (32-bit) while Windows is 64-bit (office is 32 as well). In addition when trying to remove an email account from the list it remains there unaffected. Does anybody know what should I do in order to fix this problem?

  Read the article

• Amazon EC2 pem file stopped working suddenly

  - by Jashwant

  I was connecting to Amazon EC2 through SSH and it was working well. But all of a sudden, it stopped working. I am not able to connect anymore with the same key file. What can go wrong ? Here's the debug info. ssh -vvv -i ~/Downloads/mykey.pem [email protected] OpenSSH_6.1p1 Debian-4, OpenSSL 1.0.1c 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-222-60-78.eu.compute.amazonaws.com [54.229.60.78] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/jashwant/Downloads/mykey.pem" as a RSA1 public key debug1: identity file /home/jashwant/Downloads/mykey.pem type -1 debug1: identity file /home/jashwant/Downloads/mykey.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1.1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1.1 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1p1 Debian-4 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ec2-54-222-60-78.eu.compute.amazonaws.com" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA d8:05:8e:fe:37:2d:1e:2c:f1:27:c2:e7:90:7f:45:48 debug3: load_hostkeys: loading entries for host "ec2-54-222-60-78.eu.compute.amazonaws.com" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "54.229.60.78" from file "/home/jashwant/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/jashwant/.ssh/known_hosts:5 debug3: load_hostkeys: loaded 1 keys debug1: Host 'ec2-54-222-60-78.eu.compute.amazonaws.com' is known and matches the ECDSA host key. debug1: Found key in /home/jashwant/.ssh/known_hosts:4 debug1: ssh_ecdsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: jashwant@jashwant-linux (0x7f827cbe4f00) debug2: key: /home/jashwant/Downloads/mykey.pem ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: jashwant@jashwant-linux debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /home/jashwant/Downloads/mykey.pem debug1: read PEM private key done: type RSA debug3: sign_and_send_pubkey: RSA 9b:7d:9f:2e:7a:ef:51:a2:4e:fb:0c:c0:e8:d4:66:12 debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). I've already googled everything and checked : Public DNS is same (It hasnt changed), Username is ubuntu as it's a Ubuntu AMI ( Used the same earlier), Permission is 400 on mykey.pem file ssh port is enabled via security groups ( Used the same ealier )

  Read the article

• May I'm infected?

  - by aiacet

  Hello again to everyone and many thanks to all the expert that will read this post and proupose a solution to my problem. In the last tw week, when i saw with MPC-HC (media player classic home cinema) some "justyfied" episodes, my F-Secure Client Security antivirus software alert-me that there is a threat in A0027132.exe file (the number still chanhe and increase each time, 3, that the antivir found a new threat). All this three threat are now quaratined and the file are: 1) C:/System Volume Information/_restore/{72AACB12-6526-40F2-81D7-69DF5809DD8A}\A0027132.exe 2) D:/System Volume Information/_restore/{72AACB12-6526-40F2-81D7-69DF5809DD8A}\A0027133.exe 3) D:/System Volume Information/_restore/{72AACB12-6526-40F2-81D7-69DF5809DD8A}\A0027134.exe the three threat are recognized like: 1) Backdoor.Generic.360086 2) Trojan.Packed.8707 2) Trojan.Packed.8807 The F-secure and the OS are both udpated at the last release/virus definition. Waiting for an answer, thanks in advance

  Read the article

• Using pg_connect() with wamp server and postgresql

  - by northlandiguana

  Help! I am trying to connect to a Postgres database and can't get the server to connect. When I execute this php script: $conn = pg_connect("dbname=wikimap user=postgres password=postgis host=localhost port=54321"; if (!$conn) { echo "Not connected : " . pg_error(); exit; } I get this error: <b>Fatal error</b>: Call to undefined function pg_connect() in <b>C:\wamp\www\wikimap\php\pgis.php</b> on line <b>33</b><br /> I have made sure the php_pgsql and php_pdo_pgsql extensions are enabled in the wamp menu and php.ini, and I've read through other topics in this forum and others about connecting wamp to postgres, messing with the httpd.config file and php.ini file and copying libpq.dll between bins, all to no avail. I've been working on this for hours and can't figure out how to get pg_connect to work. Any ideas???

  Read the article

• Run .sh file in linux machine via putty

  - by Prateek

  I want run an .sh file which take an argument in a Linux machine. I'm using plink.exe to execute this .sh file from a windows machine. But I don't know what to write in the batch file in order to run plink.exe which in turn executes the .sh file and this file arguement. I have written following batch command: @echo off start C:\Users\Prateek\Desktop\PLINK.EXE -ssh -P 22 user@host -pw password sh -x "/home/user/copy.sh" On executing it, I get: + echo '' + echo 'Enter partner id' Enter partner id + read pid : Actually 'Enter partner id' is the argument, which I need to pass.

  Read the article

• Windows 7 / Windows Vista won't connect to 802.1x RADIUS Server

  - by Calvin Froedge

  I've deployed Radius and have no problems connecting with TTLS, PEAP, or MD5 using linux, mac, and windows xp. For Windows 7 and Vista, I'm never prompted with the dialog box to enter username & password after configuring 802.1x support on the client. Steps taken: Enabled Wired Autoconfig in services.msc Set to use PEAP Set to require user authentication When I enable the network connection it says "Trying to authenticate" then fails with no error log / message given. The radius server gives no indication that there was ever a request (no Access-Reject - the client simply never tries to authenticate). On the windows 7 client, I can see that the DHCP server does not assign an IP to the client when 802.1x is enabled on the client (though it does when it isn't). How can I debug this further? Has anyone else run into a similar situation? My radius server is freeradius on Ubuntu 11.10.

  Read the article

• Building a DVR system for use with custom windows application (video analytics)

  - by Michael

  Is there a good PCIe DVR capture card that has at least 4 channels as well as the hardware encoding? It would have to have decent driver support in Windows xp or windows 7. I have looked at various video capture cards as well as an integrated video capture card/motherboard from Huperlabs. But so far I have not found one with a decent review and that has good driver support that I can verify. A really small card would be nice because I am trying to get a fairly small form factor. Huperlabs stuff is pretty awesome but they are slow to get back to me and they bundle their analytics software with the hardware (extra cost for nothing) The dvr is being used for security.

  Read the article

• Can't access Administrator account on Windows XP after adding local user account

  - by bwerks

  I have an installation of windows XP, and it's not part of a domain. Previously, it just had only the administrator account, and upon creating a different user account, all access was lost to the administrator account. When the machine starts up, only the new local account is offered for login, which seemed strange. I've checked that the administrator account was not disabled, nor are any rights missing from the local security policy. Furthermore, the administrator account is accessible via remote desktop, where an opportunity is given to type the desired account. REALLY strange. Upon deletion of the new local user account, the administrator account appeared again. Can anyone tell me what's going on?

  Read the article

• How to run bash script from windows using plink on linux

  - by user128877

  I'm trying to run a simple bat file from windows that will run a bash script on linux machine. The bash script is located on the linux machine. For example: I'm trying to run this bat file from windows plink.exe -pw <password> root@<ip> bash -c "/root/script.sh" Result: When running from windows the cmd is stuck forever when running the specific script (/root/script.sh) from the linux machine it's working just fine. The script contain ruby code and I'm using RVM

  Read the article

• Windows Storage Server 2008 hangs at logon

  - by ErJab

  We have a Dell PowerVault NX-3000 server running Windows Server 2008. Every now and then, when I try to login, the server seems to hang at the Welcome screen after I type in the password. However, all other services on the server are running fine - users are able to print off the print server and access their files. It just won't let me login. Any idea why this is happening? P.S.: I can't look at the server logs, because it won't let me login in the first place. Remote administration is also disabled on the server, so I can't use Remote Administration tools to look at the logs.

  Read the article

• Automatically download files in Internet Explorer without getting prompted to Save / Cancel?

  - by dimbasint

  I am currently using IE7 with XP SP3. When a webpage download with unknown file type loads, I get a prompt asking me what I want to do with the file. My options are FIND SAVE CANCEL. How do I make it so that I don't get this popup prompt, but Internet explorer automatically downloads the file into a directory I choose without asking? PS. I have already tried Tools Internet Options Security Internet Custom Level Downloads Disable/Enable/Enable, but this doesn't help. Thanks for the reply. Unfortunately I have to use IE. I'm using it in connection with other proprietary software based on IE and its settings. And yes I'm aware it's not a great browser. (This is not for strictly personal use in the browsing sense. )

  Read the article

• Setting up 802.1X wireless connection on OSX

  - by hizki

  I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort. I am trying to connect to my university's wireless network, but it has a complex security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my MAC? Thank you. P.S. I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password.

  Read the article

• http proxy caching headers

  - by David Hagan

  I have a service for which I'm about to upgrade the authentication. However, I'm trying to ensure that I make the right decision about where the encryption algorithms occur. I currently have two options: option 1) the authentication module is deployed to the client as a javascript library over https and executes client-side, so that the client can POST back an encrypted string. option 2) the authentication module is kept server-side so that the client need only POST back an unencrypted string. I know that many http proxies cache/log the query-string (and therefore any query parameters), but does anyone know of any http proxies that cache the headers as well? If the headers are being cached, then I'll clearly want to encrypt the password inside the SSL encryption, because to my understanding the headers of an HTTPS request may not always be encrypted (depending on the capabilities of the browser etcetera). Can anyone shed any light on the caching of headers by http proxies? Do you have one that does, or know of one that does?

  Read the article

• Filesystem access through web interface

  - by Jorge Suárez de Lis

  I have an SSH+Samba server so people can access its files from anywhere on the network. I thought it would be also interesting to provide access through a web interface, so they can access the files even when they don't have access to the VPN or a Samba/SSH client. Something like the Ubuntu One or Dropbox web interface. The http server could be on the same machine as the SSH+Samba, so it should just provide access to local files and some way to login with their username/password. Someone knows any software like this?

  Read the article

• OSX 10.6 Give Apache2 read&write access to mounted windows share

  - by JohEngstrom

  On Mac OS X Snow Leopard I'm trying to give the apache2 user _www full rights to a mounted hidden windows server share. I've used Connect to Server with smb://servername/share$ and saved the username/password in the keychain. The domain username used for the mount got full rights to the share on the windows server. It all works this far. I can browse and edit the files in the share from the Mac. However I can't find a way to give the apache2 user _www rights to write to the mounted share. I have a perl script that is supposed to create a file in the mounted folder but only get permission denied. I've tried all kinds of chmod and chown but it doesn't change the permissions of the share. Does anyone know how this can be done please?

  Read the article

• Where to store short strings (with my key) on the internet?

  - by Vi

  Is there simple service to store strings under my key that can be used by bots? Requirements: Simple command line access, automatic posting allowed No need to keep some session with the service alive I choose the key (so pastebins fail) No requirement for registration/authentication (for simplicity) The string should be kept for about a month. I want something like: Store: $ echo some_data_0x1299C0FF | store_my_string testtest2011 Retrieve: $ retrive_my_string testtest2011 some_data_0x1299C0FF Do you have ideas what should I use for it? I can only think of using IRC somehow (channel topics, /whowas, ...), but this is too complex for this simple task. No security is needed: anyone can update my string. The task looks very simple, so I expect the solution to be similarly simple. Expecting something like single simple curl call.

  Read the article

• bind9 dns proxy

  - by Zulakis

  We are offering multiple SSL-enabled services in our local network. To avoid certificate-warnings we bought certificates for server.ourdomain.tld and firewall.ourdomain.tld. We now created a zone in our local DNS-server in which we pointed the hosts to the corresponding private-ips. Now, each time another record for ourdomain.tld, like for example www.ourdomain.tld or alike are changed, we need to update it on both our public-dns-server AND the local dns-server. I would like our local bind-dns to serve all the information from our public-dns but serve different information for these 2 hosts. I know I could possibly have our private-ips in our public-dns but I don't want that for security reasons. The internet dns-server is being managed by a third party, while we have full control of the intranet one. Because of this I am looking for a solution which lets the intranet retrieve the records from the internet one.

  Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >