Search Results

Search found 3680 results on 148 pages for 'confused'.

Page 57/148 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• Combine OS partion with data partition on NAS4Free/FreeNAS

  - by Pak

  I recently built a NAS4Free (formerly FreeNAS) machine using a 256MB (yes, MB) USB drive for the OS. When I did the original install, I had the bright idea of making the OS partition just big enough for the OS and a then creating a second partition using the remainder of the drive to store stuff pertaining to the OS. I never really found a use for the data partition and I ended up running out of space on the OS partition, so now I'd like to combine the partitions into a single partition. Is this something that is possible to do while everything is up and running? If it comes down to it, I can take down the machine and do a fresh install of the OS using the entire space of the USB drive, but I'd like to use this as an opportunity to better familiarize myself with FreeBSD/UNIX type systems. If this is possible, will it interfere with the NAS4Free things? The data partition shows up in the web interface under the disks section. If I end up manually changing the partitions, I'd be concerned with NAS4Free getting confused by the missing partition.

  Read the article

• Isn't ethernet used for LAN?

  - by Alraxite

  I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

  Read the article

• Stream tar.gz file from FTP server

  - by linker

  Here is the situation: I have a tar.gz file on a FTP server which can contain an arbitrary number of files. Now what I'm trying to accomplish is have this file streamed and uploaded to HDFS through a Hadoop job. The fact that it's Hadoop is not important, in the end what I need to do is write some shell script that would take this file form ftp with wget and write the output to a stream. The reason why I really need to use streams is that there will be a large number of these files, and each file will be huge. It's fairly easy to do if I have a gzipped file and I'm doing something like this: wget -O - "ftp://${user}:${pass}@${host}/$file" | zcat But I'm not even sure if this is possible for a tar.gz file, especially since there are mutliple files in the archive. I'm a bit confused on what direction to take for this, any help would be greatly appreciated.

  Read the article

• Folder Permissions in Windows 7

  - by gameshints

  I'm trying to securely share a folder across two computers on a relatively public network. However, I'm a bit confused on how permissions work and was hoping for some clarification between the following so I don't accidentally make something public I don't want. When you right-click a folder and go to properties, what is the difference between Sharing Tab - 'Share...' button - List of users and permissions there Sharing Tab - 'Advanced Sharing...' button - 'Permissions' button - List of users and permissions there Security Tab - List of users and permissions there Thanks!

  Read the article

• Mix content warning on ASPX page

  - by Amit

  Hi, We have started receiving the mixed content warning on ASPX pages on our secured site. We do not have any mix content, we load all our JS, Images, CSS and ASPX files using HTTPS. I dont know why we have started receiving these warnings now. The latest thing which we have added is the third party control for Dialog boxes from Essential Object. We are previously using their Menu control but added dialog box recently. Also we have made our application browser compatible. I feel the reason is something between these two points. Can anyone suggest any solution or any workaround if they know any or have used Essential Object controls and faced simililar issue? Essential object is saying it is not their problem. The mix content warning appears any time and not specifically when the Essential Control dialog box popsup, thats why I am bit confused. Any help is highly appriciated. Thanks.

  Read the article

• Do old package versions in CentOS mean that they do not have security fixes?

  - by user1421332

  We asked our admin to update SVN on our CentOS 6.5 server. He did so and the result was SVN 1.6.11. However the current version of SVN is 1.8.9. I know the CentOS yum repository is not always up-to-date. But in that case I am confused: SVN 1.6.x is not officially supported anymore. This means it does not get any security fixes! How can the official CentOS repository provide such an old (and dangerous) version? Is there something we (or our admin) understood the wrong way?

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• itunes equalizer per track settings

  - by DA

  I'm a little confused about iTune's ability to set eq presets on a per-song basis. I have a song that I open, set to a given EQ preset, then close. When I play this song, however, the audio isn't being adjusted. If I open the EQ and turn it 'on', though, it then obeys the song's eq setting. Of course, if I leave the EQ on, then songs that do not have their own EQ setting default to whatever the EQ was originally set at. Not a HUGE deal, but it means that I would then normally have to have EQ always turned on, set to flat, so that any song that I HAVE given a EQ setting to will use it. Am I understanding how that works correctly? Is there a way to have individual songs use their EQ setting without having to turn on the EQ for everything?

  Read the article

• Sharing files between centOS on virtualbox and windows 7 as the host

  - by Wasswa Samuel

  I have centOS 5.5 installed on virtual box it has no GUI so every thing is command based. I want to make a folder in centOS which i can share with my windows 7 host OS such that i can send files to and fro seamlessly. I am new to linux and i managed to install samba. I looked up some tips on net but i ended up getting confused and none of them worked. Can someone explain to me how i can do this in a straight forward way from how i can configure samba to how i can mount the folder such that it can be seen on the host operating system. I am completely lost.please help.

  Read the article

• Should the hostname of my VPS point to the dedi IP of my Domain or to to a shared one used for new account creation?

  - by thomas

  I leased a VPS which I want to use to sell shared hosting. 3 IPs - I call them A, B and C here for simplicity. Actual setup is: A=NS1.mydomain.com; host.mydomain.com and is used to set-up new accounts in shared environment B=NS2.mydomain.com C=dedicated IP for mydomain.com (SSL secured) The more I read about DNS, the more I get confused; thus my question: Is this configuration "Good Practice", especially the hostname pointing to A rather than to C? And what would be a better alternative?

  Read the article

• Economical way to get many harddrives into rack mount?

  - by Industrial

  Hi everyone, Please bear with me as being a bit of a newcomer at 19" rack-mounted equipment. I've thought a fair bit lately about the best way of getting 4x or 6x of 2.5" hard drives into my rack and are right now currently slightly confused about would be the best (economical) solution. After scouting the market, I've found this type of disk array units that offers built in RAID and a lot of drive slots and a truckload of geek cred, but at a price that just isn't going to fit in my budget. I've also found these type of cute adapters that takes two 2.5" drives in one 3.5" slot, but I will obviously need a chassie with a lot of 3.5" spaces in order to make it work. So what is the most economical way to house my harddrives in my rack?

  Read the article

• Installed Windows 7 without formatting disk? Possible?

  - by ile

  I've just installed Win7 but I'm little confused. When booting from XP cd, there is an option to format hard drive. After choosing which partition to format, format process takes usually not less than hour (depends on size of partition), but when I clicked on Format when in Windows 7 installation interface, I received some message (I cant remember what was it, but it was not any error message or something like that) and that was it. After that I choose to install Windows 7 and installation began. "Expanding Windows Files" was the longest process of installation. Was that the part when the hard drive was formatted? I don't understand what happened? Is it possible that my hard drive was not formatted but still installation was successful?

  Read the article

• Hosting website when port 80 is taken?

  - by cinqoTimo

  A few months ago, we purchased an R-HUB unit to replace WebEx for remote support. The device operates through port 80, ehich doesn't appear to be configurable. I know in IIS, you can specify a port besides port 80, but the problem is in the port forwarding. On our router, we have to map an incoming port to the forward port which then directs traffic to the node (webserver). However, the incoming port for both the webserver and the R-HUB is 80 - and the server seems to be getting confused as I can only get to the R-HUB, not the website. How can I expose both devices? Host header headers? DNS config?

  Read the article

• How does a private intra network connect to the internet?

  - by user24454

  Yesterday I visited the offices of RailTel - a public company in India that provides communication backbone to the Indian Railways, they had a very sophisticated setup of Optical Fiber cables for data transmission. They said that this is a private network for internal use only. Then when I was in the Exchange Office - the main communication office, a place where they actually use those communication channels. They said that we could connect to the Intranet and as well as the Internet! My question is, that how is this possible? How can privately laid optical fibers connect globally? On google, I picked up the term internet exhange? But this has got me confused further, why would a private network want to go to this exchange? Please explain me in very simple terms, how does this all work? If this is just a connection of wires, then why charge so much for little bandwidth? Thanks.

  Read the article

• Passwordless ssh on multiple machines

  - by Phil

  Hi all, I'm quite confused with all the ssh security stuff. I am trying to reconfigure a system that is currently broken for reasons unknown. Machine A is your personal computer that you use whenever you're at home. Machine B is the head node of an HPC cluster and all the other machines C are all identically configured machines which share the home directories of machine B. This is an HPC cluster if you haven't guessed. How would I configure passwordless ssh between any nodes B or C. A can only get to C through sshing into B

  Read the article

• Pinging 192.168.1.4 is looking to 192.168.1.2?

  - by BVernon

  When I run the command "ping 192.168.1.4" I am get the following results: Pinging 192.168.1.4 with 32 bytes of data: Reply from 192.168.1.2: Destination host unreachable. Reply from 192.168.1.2: Destination host unreachable. Reply from 192.168.1.2: Destination host unreachable. Reply from 192.168.1.2: Destination host unreachable. Can anyone help me understand why in the world it's telling me that 192.168.1.2 is unreachable when that's not even the ip address I typed in? I'm very confused. Also in case it's relevant, I'm on a workgroup.

  Read the article

• What does VNC reflectors basically do?

  - by honeybadger

  I am confused about what vnc reflector does. From the documentation http://sourceforge.net/projects/vnc-reflector/ I got that it's proxysitting between real VNC server (a host) and a number of VNC clients. My confusion is : 1. Does it make any changes to the coming stream from server 2. Does it make 1 connection with server to connect to many client or the connections are proportionate. Documentation is not clear in this. If anyone can help me?

  Read the article

• Remote Desktop AND monitor fail on restart (Win2008R2)

  - by Wesley

  I am in the process of building a small 3 server farm. Each machine is running Window Server 2008 R2. As is normal, I am in the process of installing patch after patch to bring the machine up to snuff. Every time I restart the machine, or most every time, when I try to remote in to the machine I get the Log In window, but then almost immediately I get the message that my remote session was ended. If I physically walk over to the machine and plug in a monitor and keyboard, I see nothing. If I leave the keyboard and monitor in and restart the machine by force, the computer reboots just fine. When windows starts, I get no error message about windows not starting or being shut off unexpectedly. Once I log into the machine physically by the keyboard, I can then remote in to the machine at that point. Very confused. This happens on all 3 machines, these machines have different hardware.

  Read the article

• mysql wont stop, mysqld_safe appeared in top

  - by power4

  my server (CentOS) contains lots of website, which collect data from lots of sources with cron. the mysql config is the default recently, PHP failed to communicate with mysql. Firstly I just restart the server but after restarted, PHP still failed to communicate with mysql I've tried: ps ax | grep mysql Then run: kill -9 #### (I've also tried killall -9 ####) - this failed, ps ax | grep mysql showing the killed process id is still there service mysqld start (I've also tried /etc/init.d/mysqld start) - I got reply Timeout error occurred trying to start MySQL Daemon. when run top, mysqld_safe is appeared on top with about 50% of CPU usage. I dont know the size of all the database. I really confused

  Read the article

• linux system problem

  - by snakec

  very first thanks to u all for Ur support. I'm quite new to Linux .i know how to install software but i don't know 1: how to install library .a or .so files i: how to install tar.gz i use the method like ./configure. make make install but most of the time i got the message nothing to make .in lots of tar.gz there is no installation document no make file no .configure file that make me quite confused how to install them or run them now i got sample source code of cuda i got them in tar.gz form when i extract them i found a folder in folder i found folder like c ,doc,shared etc when i open each folder i found more folder n file like that src, doc common ,lib, in these folder i found source code file header files libraries file make files i don't know how to run this kind of project can the be installed on the system how to run them they don't have .run file or script they don't have configure file can any one explain me how to compile them ,how to run them & how to install them

  Read the article

• adding ftp user on ubuntu

  - by user46250

  I followed this tut http://www.trainsignal.com/blog/how-to-set-up-safe-ftp-in-linux to setup an ftp server with user account sudo mkdir -p /home/ftp/ftpuser sudo useradd ftpuser -d /home/ftp/ftpuser -s /bin/false sudo passwd ftpuser when I tried to connect with login ftpuser remotely it didn't work. It didn't work even with root UNLESS I removed root from ftpusers. I am confused ftpusers are the users NOT allowed to do ftp ? Where are the list of users allowed then and why can't I connect with ftpuser I created ?

  Read the article

• vSwitch configuration with 12 uplinks

  - by Joshua

  I have been doing a lot of research on vSwitch configurations, but I think I am more confused now after all of the reading that I have done. So here is my situation 3 ESX Hosts (12 nics each), 1 iSCSI SAN, 2 Force 10 switches. Should I create individual vSwitches for MGMT, vMotion, VM, and SCSI traffic? or do I need to group anything together in the same vSwitch? I am going to have 4 vLANS total, one for each of those items, do I need to do any trunking on the physical switch or just assign the correct vLAN to each physical switch port?

  Read the article

• Where to run Java and PHP code continuously

  - by az1112

  I'm sorry if this is the wrong forum for a question like this, but you have to start asking questions somewhere to get anywhere :) The question is pretty simple: I need a server where I can run Java and PHP scripts 24 hours a day, 7 days a week. I need to be able to access this server via SSH, and I need to be able to retrieve the data generated by scripts using SCP. Also, I need to be able to run 10-20 scripts simultaneously. What is the name of the thing I should be looking for? Is it a dedicated server? I'm confused for 2 reasons: 1) because there seem to be all kinds of servers out there; 2) because most companies advertising dedicated servers seem to be aiming them at people who want to host websites. But I don't want to host a website; I just want to run my code.

  Read the article

• SQL 2008 R2 Mirroring Issue

  - by CWL

  Windows 2008 R2 with SQL 2008 R2 - Using Mirroring of a Database across the WAN in a HA setup with one witness. One issue I am having is during a failure (ever so often) the system fails over or tries, but leaves both databases in a Restoring State. My guess is the failover issue happens when there is a WAN bouncing and the systems get confused. The usual fix is to reboot the sql servers. Has anyone seen this type of failure? While this does not happen often it does causes an issue and concern with HA not being trusted fully.

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >