Search Results

Search found 1808 results on 73 pages for 'hot spare'.

Page 57/73 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • How to setup prawn on heroku when installed as a git submodule

    - by brad
    I have a rails app that I am trying to deploy to heroku. This app generates pdfs using prawn. I installed prawn as a git submodule rather than as a gem as this is what is recommended on the prawn website (here). This has not worked well with heroku so far though. As stated on heroku's application constraints page submodules are not supported so I followed their instructions to track the submodule in the main project and tried again. This has not worked and when I access my application I get the following error: App failed to start An error happened during the initialization of your app. This may be due to a typo, wrong number of arguments, or calling a function that doesn’t exists. Check the stack trace below for specific details. Make sure the app is working locally in production mode, by running it with RAILS_ENV (for Rails apps) or RACK_ENV (for Sinatra or other rack apps) set to production. e.g. RAILS_ENV=production script/server. Original Error /usr/local/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': /disk1/home/slugs/208590_03c9c22_67f5/mnt/app/controllers/invoices_controller.rb:37: syntax error, unexpected ')' (SyntaxError) ).to_pdf(@invoice) (and then a whole lot more that I'll spare you from) The .to_pdf function described in the last line is called in a controller in exactly the way described in the prawn how-to that I linked to above so my interpretation of the error message is that prawn is not being installed/detected. Does anyone know how I can address this? I'm new to heroku so have little idea how to approach this. Is the submodule approach for prawn dead in the water from the get-go? Do I need to install it as a gem instead. I'd rather keep it as a submodule just because that works for now and I don't want to break it.

    Read the article

  • Windows 7 Loading Very Slow

    - by Adnan
    Hi guys, I've had a problem that only started to occur yesterday. When I boot into Windows 7 and log on to my user account, the computer gets very laggy and slow for at least 5 minutes. Icons take ages to load, and everything is rendered unclickable. This happens for about five minutes after which everything goes back to normal. I tried restarting a few times to see if this is a recurring problem, and it is. I ran a full system scan with Microsoft Security Essentials and found nothing wrong, and I also defragmented the disk to increase performance. However, the problem still exists. Edit: For the past day, I've been trying to install Ubuntu on the same laptop. When installing it on a partition didn't work, I decided to use Wubi. Could this somehow be the problem? Also, my hard drive gets hot a lot, so could the heat be affecting the hard drive and maybe making it defective? Any help on this issue would be greatly, greatly appreciated.

    Read the article

  • How to migrate a running KVM (with full disk copy) to another node?

    - by klipz
    I'm doing tests on KVM, and I'd like to see if I can make a hot migration, I mean the virtual machine won't stop running during the migration (but a few seconds of freeze is ok). I use a small cluster for my test : kvm1, kvm2, and kvmnfs. kvm1 and kvm2 runs the virtual machines kvmnfs is a NFS server, and it's mounted on /KVM on both kvm1 and kvm2 To migrate a VM (only RAM in fact) from kvm1 to kvm2, I run the same kvm command on kvm2 (with -incoming tcp:0:4444) that on kvm1, then I use "migrate -d tcp:kvm2:4444" : It works great, since the VM file is common to both machines. Now, I wan't to make a full migration (RAM + disk) of a local VM file (no more NFS) of kvm1 to kvm2. I tried to create an empty file, with touch, on kvm2 and use the same kvm command line + the "-incoming ..."). Then on kvm1 I use "migrate -d tcp:kvm2:4444" : It copies everything, then... the VM fails (any I/O disk gives an I/O error) ! And my VM file on kvm2, the one I created with touch, as still a size of 0 bytes. What am I doing wrong ? What is the exact command to use on kvm2 ? And what is the command to launch, in the monitoring mode, on kvm1 ?

    Read the article

  • Can't do more than one activity at a time after switching modems

    - by vallorn
    I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

    Read the article

  • Running multiple instances of tomcat in eclipse WTP

    - by lisak
    Hey, SCENARIO: 10 CATALINA_BASEs with own configuration (always the same port numbers 8080, but 10 different IP/hostnames on one host via virtual IPs). created a server in WTP and pick "Use the custom location" option in the server configuration in eclipse. New configuration files are created in workspace/Server/server-name-config/ Set up the server path and deploy path for my catalina base (not the internal .metadata one) After I started it, the new configuration files overwrote the original catalina-base/conf files I had there - I was glad, it should be like this but after I made changes in the eclipse config files workspace/Server/server-name-config/ and restarted the server, the changes didn't appeared in the original files in CATALINA_BASE/conf What the hell is that ? So I set the CATALINA_BASE/conf/server.xml to fault configuration and restarted tomcat from eclipse and it worked ! it took the configuration from /Server/server-name-config/server.xml Then I deleted CATALINA_BASE/conf/server.xml and it said that there is no server.xml in catalina base ! How is it possible ? I don't understand why eclipse WTP developers made so tight integration. There should by just symbolic links in /Server/server-name-config/ pointing to CATALINA_BASE/conf/ ... now there is a weird system which is totally unpredictable. The changes in /Server/server-name-config/ are not reflected in CATALINA_BASE/conf ... from where the standard bootstrap.jar or other catalina classloaders and classes build server, engine and other objects with particular setting. Moreover the CATALINA_BASEs could be used outside eclipse then. The second problem, I'm setting up various things in CATALINA_BASE/bin/startup.sh and setenv.sh which is easy cause I can use bash for it. Is then modifying VM parameters in the "Open launch configuration" settings the only way how to do it in eclipse ? Sorry for such a huge pile of questions, but I'm annoyed by the fact that it is much better to not use eclipse WTP for this because it is very poorly designed and it's a shame because this would spare me a lot of time. And using the internal .metadata/ instances it's even more terrifying way that the one I described.

    Read the article

  • How to configure SCSI hard drives and RAID for Poweredge 2850 web server

    - by Saul
    I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

    Read the article

  • Binary search in a sorted (memory-mapped ?) file in Java

    - by sds
    I am struggling to port a Perl program to Java, and learning Java as I go. A central component of the original program is a Perl module that does string prefix lookups in a +500 GB sorted text file using binary search (essentially, "seek" to a byte offset in the middle of the file, backtrack to nearest newline, compare line prefix with the search string, "seek" to half/double that byte offset, repeat until found...) I have experimented with several database solutions but found that nothing beats this in sheer lookup speed with data sets of this size. Do you know of any existing Java library that implements such functionality? Failing that, could you point me to some idiomatic example code that does random access reads in text files? Alternatively, I am not familiar with the new (?) Java I/O libraries but would it be an option to memory-map the 500 GB text file (I'm on a 64-bit machine with memory to spare) and do binary search on the memory-mapped byte array? I would be very interested to hear any experiences you have to share about this and similar problems.

    Read the article

  • Desktop virtualization

    - by gurpal2000
    Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

    Read the article

  • Overheating Toshiba Satellite L300

    - by ldigas
    A coleague of mine's having trouble with his new Toshiba Satellite L300 ... I tool a kook at it, and indeed it's hot as hell. I couldn't hold my hand on it for too long. He says it also has a tendency to turn itself off (WinXP 32bit running) with no forewarning. Hasn't happened to me while I was using it, but that wasn't long anyways. The first guess was it was too dirty ... problem is it's new, came out of a package a quarter of a year ago. Kept in a clean environment (office). Looks clean. No dust in sight. Second guess is that the fan wasn't working properly, cause indeed it has intervals of working, and non working. But when I listen to it, it sounds like normal usage. I took a SpeedFan measurement, and it reports temp. up to 85 Celsius ... which is definitely too high. Anyone knows what else I could do to it ? It is under warranty and it will go to the service, but I thought if there is something we can do, as to avoid carrying it there / be without it for a week ...

    Read the article

  • ASP.NET MVC 2 DisplayFor()

    - by ZombieSheep
    I'm looking at the new version of ASP.NET MVC (see here for more details if you haven't seen it already) and I'm having some pretty basic trouble displaying the content of an object. In my control I have an object of type "Person", which I am passing to the view in ViewData.Model. All is well so far, and I can extact the object in the view ready for display. What I don't get, though, is how I need to call the Html.DisplayFor() method in order to get the data to screen. I've tried the following... <% MVC2test.Models.Person p = ViewData.Model as MVC2test.Models.Person; %> // snip <%= Html.DisplayFor(p => p) %> but I get the following message: CS0136: A local variable named 'p' cannot be declared in this scope because it would give a different meaning to 'p', which is already used in a 'parent or current' scope to denote something else I know this is not what I should be doing - I know that redefining a variable will producte this error, but I don't know how to access the object from the controller. So my question is, how do I pass the object to the view in order to display its properties? (I should add that I am reading up on this in my limited spare time, so it is entirely possible I have missed something fundamental) TIA

    Read the article

  • What framework would allow for the largest coverage of freelance developers in the media/digital mar

    - by optician
    This question is not about which is the best, it is about which makes the most business sense to use as a company's platform of choice for ongoing freelance development. I'm currently trying to decide what framework to move my company in regarding frameworks for web application work. Options are ASP.NET MVC Django CakePHP/Symfony etc.. Struts Pearl on Rails Please feel free to add more to the discussion. I currently work in ASP.NET MVC in my Spare time, and find it incredibly enjoyable to work with. It is my first experince with an MVC framework for the web, so I can't talk on the others. The reason for not pushing this at the company is that I feel that there are not many developers in the Media/Marketing world who would work with this, so it may be hard to extend the team, or at least cost more. I would like to move into learning and pushing Django, partly to learn python, partly to feel a bit cooler (all my geeky friends use Java/Python/c++). Microsoft is the dark side to most company's I work with (Marketing/Media focused). But again I'm worried about developers in this sector. PHP seems like the natural choice, but I'm scared by the sheer amount of possible frameworks, and also that the quality of developer may be lower. I know there are great php developers out there, but how many of them know multiple frameworks? Are they similar enough that anyone decent at php can pick them up? Just put struts in the list as an option, but personally I live with a Java developer, and considering my experience with c#, I'm just not that interested in learning Java (selfish personal geeky reasons) Final option was a joke http://www.bbc.co.uk/blogs/radiolabs/2007/11/perl_on_rails.shtml

    Read the article

  • auto m3u creation

    - by newbie69
    Hi, I am looking for a solution to automatically create .m3u playlists for each music folder in my sdcard so that the music player can play music by folders. I had written a simple VB.Net app in the past that does exactly the above but apparently, it has to be run from Windows. Since I have no Java nor Android developing experience I found it quite hard to try to write a similar app that can be run directly from the phone. In a few words, the app does the following: 1) Searches the SD and lists all folders that contain 2 or more .mp3 files (just for user verification) 2) Creates in every listed folder above, a .m3u file that simply lists line-by-line all the mp3 files that exist in the specific folder. Is there such an app or could someone spare some time and give me some rough instructions on how to create it in Eclipse 3.5.2 environment? (device used: Motorola Droid/Milestone, Android 2.1) I don't care about any graphics or complex UI, just a script to execute the above procedure that would give every "playlist-supporting" music player in Android, the precious ability to play music by folders. I know it is too much to ask but just in case! Thanx in advance.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Autocomplete Error Question - Ruby on Rails

    - by bgadoci
    I have built a very simple blog application using Ruby on Rails. New to both Ruby and Rails so excuse the stupid questions. I currently have two tables that relate to this question. I have a Post table and a Tag table. Basically I set it up such that Post has_many :tags and Tag belongs_to :post. I am using AJAX to process and display the tags in the show view of the post. I installed the auto_complete plugin and I am getting an error when I enter the letters in the text_field_with_auto_complete for tag creation. My suspicion is this is because the form is a remote_form_for or something I am doing wrong in the routes.rb. Here is the error and code: Error Processing PostsController#show (for 127.0.0.1 at 2010-04-13 23:25:46) [GET] Parameters: {"tag"=>{"tag_name"=>"f"}, "id"=>"auto_complete_for_tag_tag_name"} Post Load (0.1ms) SELECT * FROM "posts" WHERE ("posts"."id" = 0) ActiveRecord::RecordNotFound (Couldn't find Post with ID=auto_complete_for_tag_tag_name): app/controllers/posts_controller.rb:22:in `show' Rendered rescues/_trace (26.0ms) Rendered rescues/_request_and_response (0.2ms) Rendering rescues/layout (not_found) remote_form_for located in /views/posts/show.html.erb <% remote_form_for [@post, Tag.new] do |f| %> <p> <%= f.label :tag_name, "Tag" %><br/> <%= text_field_with_auto_complete :tag, :tag_name, {}, {:method => :get} %> </p> <p><%= f.submit "Add Comment" %></p> <% end %> tags_controller.rb (I'll spare you all the actions but added the following here) auto_complete_for :tag, :tag_name routes.rb map.resources :posts, :has_many => :comments map.resources :posts, :has_many => :tags map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get }

    Read the article

  • Macbook Pro - 15" with i7 processor - Any problems with heat?

    - by webworm
    You may have already heard about the review done by the folks at PC Authority in Australia, where they had an i7 MacBook Pro that got up to 100 degrees Celsius during benchmarking. Here is the URL in case you have not read it. http://www.pcauthority.com.au/News/172791,macbook-pro-helps-core-i7-hit-100-degrees.aspx In any case, I was considering purchasing a 15" Macbook Pro with the i7 processor and the NVIDIA GeForce GT330M with 512 video memory. Having read how hot the computer got I started to become hesitant about purchasing. My main concern is long term damage to the computer due to excessive heat. I plan to use the MacBook Pro as a development machine where I will be running Windows 7 within VMWare Fusion or Virtual Box. Within the VM I will be running IIS, SQL Server, Visual Studio and SharePoint Server. Hence why I would like to have the power of the i7 processor. That is why I wanted to check with actually owners of the MacBooks with the i7 processor and see what their experiences have been. Have you noticed excessive heat? How does your Macbook handle process intensive apps over long periods of time? Thank you!

    Read the article

  • How to tell which process is hogging my CPU when they don't add up to 100%?

    - by endolith
    Ubuntu's System Monitor applet shows 100% CPU usage continuously. If I click it, the resources tab shows it at 100% continuously, too. If I go to processes, though, to find out which process is the culprit, there is nothing above 10%. If I run top there is nothing above 10%. The individual processes do not add up to 100%. I try killing lots of processes, but the overall usage continues to be 100%. How can I find out what's hogging the CPU? This is an unusual situation on a computer I use daily, which is never anywhere near 100% CPU unless I'm doing something that requires it (like loading 32 Firefox tabs), after which it goes back to a normal idle level. It's not a new install or anything. There is no reason the processor should be maxed out. I'm not sure when it started or if I changed something that caused it to happen. Normally I would use top or System Monitor and find the process that had gone out of control, but I can't find anything with those tools this time. It persists after reboots and everything. And the processor is obviously hot, so it's not an erroneous reading. Update: I tried killing every process, one at a time, until the problem went away, and killing vino-server finally fixed it, even though that process never went above 5%. I had enabled Remote Desktop a few days ago (and have obviously now disabled it). But the question remains: How did a single process manage to use 100% CPU while top only showed that process at 5%? How do I identify culprits like this in the future? Looks like I'm not the only one who's had this problem: Still a problem in both jaunty & karmic. Interestingly, both System Monitor & htop do not show the sum of individual processes being anywhere near 100% cpu.

    Read the article

  • For the professional programmers - do you still write code for fun at home ? [closed]

    - by Led
    Possible Duplicate: Do you ever code just for fun? I've been working as a 'professional' coder for about 11 years. (I've just turned 33.) When I talk to my collegues, I find that most of them actually don't program any more in their spare time - 8 (or 10 :)) hours a day at their job is enough for them. A difference between me and them might be that I was always programming for fun (demoscene stuff etc.) which is why I got into the field, while most of them picked up programming later on (at university or whatever). When I get home my head is always full of ideas, so usually I have a hobby-project going on. Is it weird to spend 8 hours a day programming, and then get home, have dinner, and do some more ? For me the reasons are just - ideas : trying stuff - wanting to develop something all by myself, so when it's finished I can claim it as my own victory How about you ? And if you do, do you have other reasons to do so ? Edit: And if you've got sparetime projects, it might be fun to tell us a bit about it :) Spamming a link to your site/hobbyproject won't be frowned upon here ! Edit2: Vote for this if you want to encourage companies to make monitors that'll give you a nice tan ! ;-)

    Read the article

  • Why do messenger keeps coming up when I adjust screen brightness?

    - by Asaf R
    My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

    Read the article

  • Adding third disk as a single disk in a server with an existing RAID1

    - by slowhandsolo
    I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

    Read the article

  • No power save on external hard drive - How to implement?

    - by blastawaythewall
    I recently bought a new 3.5" USB external hard drive which I thought had a power save feature on it, but it turns out that it doesn't. So whether it's being used or not, it spins, which wouldn't be a problem if it wasn't so loud and didn't get really really hot. After doing some research, it seems like what controls this is the enclosure of the hard drive and not the drive itself or the OS (although I suspect that's not entirely true). I attempted to use the "hdparm" utility but it couldn't identify my externals. Just to be clear, I'm defining power save as a hard drive spinning down after a certain time period of not being used (read from/written to). Also, I have other externals that do this, so it's not a problem from my computer. Here's my question: Is there a way to implement a power save-like feature on my hard drive through software, OS settings, or anything else? Here's some details: Running: Windows XP Home SP2 HD Model: Cavalry CAUM-B-OTB 2TB (although the website only lists 1TB max) Inside: Hitachi Deskstar 7K2000 (HDS722020ALA330) (I would link, but new users can only post 1) Thanks in advance.

    Read the article

  • What do you use to play sound in iPhone games?

    - by zoul
    Hello! I have a performance-intensive iPhone game I would like to add sounds to. There seem to be about three main choices: (1) AVAudioPlayer, (2) Audio Queues and (3) OpenAL. I’d hate to write pages of low-level code just to play a sample, so that I would like to use AVAudioPlayer. The problem is that it seems to kill the performace – I’ve done a simple measuring using CFAbsoluteTimeGetCurrent and the play message seems to take somewhere from 9 to 30 ms to finish. That’s quite miserable, considering that 25 ms == 40 fps. Of course there is the prepareToPlay method that should speed things up. That’s why I wrote a simple class that keeps several AVAudioPlayers at its disposal, prepares them beforehand and then plays the sample using the prepared player. No cigar, still it takes the ~20 ms I mentioned above. Such performance is unusable for games, so what do you use to play sounds with a decent performance on iPhone? Am I doing something wrong with the AVAudioPlayer? Do you play sounds with Audio Queues? (I’ve written something akin to AVAudioPlayer before 2.2 came out and I would love to spare that experience.) Do you use OpenAL? If yes, is there a simple way to play sounds with OpenAL, or do you have to write pages of code? Update: Yes, playing sounds with OpenAL is fairly simple.

    Read the article

  • How would you go about parsing markdown?

    - by John Leidegren
    You can find the syntax here. The thing is, the source that follows with the download is written in perl. Which I have no intentions of honoring. It is riddled with regex and it relies on MD5 hashes to escape certain characters. Something is just wrong about that! I'm about to hard code a parser for markdown and I'm wonder if someone had some experience with this? Edit: If you don't have anything meaningful to say about the actual parsing of markdown, spare me the time. (This might sound harsh, but yes, I'm looking for insight, not a solution i.e. third-party library). To help a bit with the answers, regex are meant to identify patterns! NOT to parse an entire grammar. That people consider doing so is foobar. If you think about markdown, it's fundamentally based around the concept of paragraphs. As such, a reasonable approach might be to split the input into paragraphs. There are many kinds of paragraphs e.g. heading, text, list, blockquote, code. The challenge is thus to identify these paragraphs and in what context they occur. I'll be back with a solution, once I find it's worthy to be shared.

    Read the article

  • Samsung laptop randomly shuts down

    - by Dmatig
    I've rewritten this question because it turned into an indecipherable mess. I have a Samsung R560 laptop that is overheating, and shutting itself down under load consistantly. Thank you quickcel for reccomending me Speedfan to monitor my temps. Here they are (Load / Idle): (Ignore "Temp1 and Temp2", whatever sensors they are they'd always random, pretty sure they're broke). The load temperature is after just 5 minites of playing Fallout 3 - another 5 minutes and it (the GPU - 9600M GS) consistantly breaches the mid 90's then shuts down, so it's hard to get a good picture of it. I'm looking for some solution or way to decrease these temperatures, because they seem far too high even idle. I've tried: Opening up the case and clearing of all dust with compressed air. Updating drivers for my Graphics card Have purchased and am using a notebook cooler I don't want to: Undervolt / underclock (defeats the point of having a more expensive card) Use lower power / performance settings (again, i might as well have bought something cheaper) Is there anything else i can try (software or inexpensive hardware) that can help me fix this? Has anybody had a Samsung laptop and knows if this can be sorted under my warranty, and the turnaround time of sending it off (UK?)(it has always ran hotter than it should, but now at 6 months old is getting hot enough to power off)

    Read the article

  • Compaq motherboard CQ60 AMD - nvidia chipsed graphic problem

    - by Dritan
    Hi! It nice to have read that you solved this problem this way. I have 2 laptops Compaq CQ60 AMD Athlon with Nvidia graphic cards. the first one is new, when i press power button, it lights up only the ON led in front and nothing else, no fan working, blank screen, no beep.. I don't know what may be the problem. When I put on power adaptor, it lights up only the side power led near dhe power adapter plug but it doesn't light up the front led one. the second one have this problem that it spins the fan, light power and On led, but it doesn't show nothing on the screen blank (even with external monitor). In this case it maybe this problem of the Nvida Graphic Chip and it may need a reflow. I have an hot air station, but I don't know if I should try this or the oven one. Please can you give me any suggestion what to do to solve this. I have read that the solution of the Oven method is just temporary,maximum of three months, do you have the same experience about this? Any suggestion is wellcome.

    Read the article

  • is ksplice production ready?

    - by faultyserver
    I would be interested to hear the serverfault community's experiences with Ksplice in production. Quick blurb from wikipedia: Ksplice is a free and open source extension of the Linux kernel which allows system administrators to apply security patches to a running kernel without having to reboot the operating system. and Ksplice can, without restarting the kernel, apply any source code patch that only needs to modify the kernel code. Unlike other hot update systems, Ksplice takes as input only a unified diff and the original kernel source code, and it updates the running kernel correctly, with no further human assistance required. Additionally, taking advantage of Ksplice does not require any preparation before the system is originally booted (the running kernel does not need to have been specially compiled, for example). In order to generate an update, Ksplice must determine what code within the kernel has been changed by the source code patch. So a few questions: How has the stability been? any odd issues that you have encountered with its 'rebootless live patching' of the kernel? Kernel panics or horror stories? I have been running it on a few test systems and so far its been working as advertised, but I am interested in what other sysadmins experiences have been with Ksplice before going 'all in' and deploying this on our production servers. So, anybody using Kspice in production? update: hmm, not seeing any real activity on this question after a couple of hours (besides some kind upvotes and favs). Maybe to spark some activity I'll also ask a few more questions and see if we can get this discussion going... "If you are aware of Ksplice, is there a reason you are not using it?" "Do you feel its still too bleeding edge, unproven or untested?" "Does Ksplice not fit well within your current patch-management system?" "Do you hate having systems that have long (and secure) uptimes?" ;-)

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >