Search Results

Search found 4621 results on 185 pages for 'scott lock'.

Page 57/185 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Ardour wont start Jack problem

  - by Drew S

  I downloaded Ardour yesterday, it worked, edited an audio file done. Come back today it wont start I get this: Ardour could not start JACK There are several possible reasons: 1) You requested audio parameters that are not supported.. 2) JACK is running as another user. Please consider the possibilities, and perhaps try different parameters. So I try and look at qjackctl to see what happening there. When I try to start JACK I get D-BUS: JACK server could not be started. then Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. and this is the message box in JACK. 15:22:12.927 Patchbay deactivated. 15:22:12.927 Statistics reset. 15:22:12.944 ALSA connection change. 15:22:12.951 D-BUS: Service is available (org.jackaudio.service aka jackdbus). Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:22:12.959 ALSA connection graph change. 15:22:45.850 ALSA connection graph change. 15:22:46.021 ALSA connection change. 15:22:56.492 ALSA connection graph change. 15:22:56.624 ALSA connection change. 15:23:42.340 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:23:42 2013: Starting jack server... Wed Oct 23 15:23:42 2013: JACK server starting in realtime mode with priority 10 Wed Oct 23 15:23:42 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:23:42 2013: Acquired audio card Audio0 Wed Oct 23 15:23:42 2013: creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit Wed Oct 23 15:23:42 2013: ERROR: ATTENTION: The playback device "hw:0" is already in use. The following applications are using your soundcard(s) so you should check them and stop them as necessary before trying to start JACK again: pulseaudio (process ID 2553) Wed Oct 23 15:23:42 2013: ERROR: Cannot initialize driver Wed Oct 23 15:23:42 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:23:42 2013: ERROR: Failed to open server Wed Oct 23 15:23:43 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:41.669 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:49.006 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:48 2013: Starting jack server... Wed Oct 23 15:26:48 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:48 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:48 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:48 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:48 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:48 2013: ERROR: Failed to open server Wed Oct 23 15:26:50 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:52.441 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:55.997 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:55 2013: Starting jack server... Wed Oct 23 15:26:55 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:55 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:55 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:55 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:55 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:55 2013: ERROR: Failed to open server Wed Oct 23 15:26:57 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:59.054 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:29:24.624 ALSA connection graph change. 15:29:24.641 ALSA connection change. 15:33:11.760 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:33:11 2013: Starting jack server... Wed Oct 23 15:33:11 2013: JACK server starting in non-realtime mode Wed Oct 23 15:33:11 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:33:11 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:33:11 2013: ERROR: Cannot initialize driver Wed Oct 23 15:33:11 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:33:11 2013: ERROR: Failed to open server Wed Oct 23 15:33:12 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:34:09.439 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started

  Read the article

• Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

  - by user647124

  Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

  Read the article

• WhatsApp &amp; Tasker for Android &ndash; Read &amp; Write messages

  - by Shaurya Anand

  So, I finally gave up on all my previous the Microsoft Mobile/Phone OS devices and made my switch to Android this year. I am using my Samsung Galaxy Note GT-N7000 with CyanogenMod 9.1.0 (http://get.cm/get/jenkins/7086/cm-9.1.0-n7000.zip) and ClockworkMod 6.0.1.2 (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-n7000.zip) since August this year and I am so happy with the performance and the flexibility it offers me. As a software developer by profession, I would expect most of my gadget to be highly customizable and programmable (one time or at intervals) to suit my needs as close as it can. I was introduced to Automation for Android – Tasker (https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm&hl=en) via reddit (http://www.reddit.com/r/tasker) and the word ‘automation’ was enough for me to dive right into this app. Only automation that I did earlier was switching profiles depending on location on there phones. And now, just imagine a complete set of possibilities that can be automate on the phone or via the phone. I did my research and found a couple of other tools that do the same/as close as what Tasker can do and few of them are even free. There’s one even by Microsoft called on{X} (https://play.google.com/store/apps/details?id=com.microsoft.onx.app&hl=en). Microsoft’s on{X} really caught my eye. You can write code for your phone on the web application by them, deploy it on your phone and even trace the flow all using your PC. Really brilliant, I love the fact that it’s all JavaScript. Here comes the but, it is still very very young and it’s policy of accessing my News Feed on Facebook is not something that I can not digest. On{X} is good, but as I said earlier, the API is not very mature and hence, I gave up on it. I bought Tasker, the best 5,00 € I spent in ages and I want to talk about it in this post. I am still a “noob” while operating this tool, but I tried my shot at automating WhatsApp (https://play.google.com/store/apps/details?id=com.whatsapp&hl=en), a popular messenger for various platform. The requirement for the automation is that, if I send a WhatsApp ‘wru’ message to the phone, it should respond back giving the location and battery level of my phone. It could be useful, if you like to locate your misplaced phone or automatically reply to your partner/friend, honestly, I don’t know what you will use it - through this post, I am just introducing automating WhatsApp using Tasker. Before we begin, the following script only works when your phone is rooted as we will be accessing the WhatsApp database and type some special characters like ‘:’. Let’s follow the code line by line: Profile:         Location request from XYZ. (12) // Name of your profile. Event:         Notification [ Owner Application:WhatsApp Title:* ] // When a new notification comes from WhatsApp, this event is fired. Read the end note, if you face problems with Chrome app after enabling Tasker accessibility. Enter:         A1: Run Shell [ Command:sqlite3 // We will access the WhatsApp database and check if the message comes from designated phone number or not. We mustn’t reply to every message.                 /data/data/com.whatsapp/databases/msgstore.db "SELECT _id, data FROM                  messages WHERE key_from_me='0' AND key_remote_jid LIKE '%XXXXXXXXXXX%' // Replace XXXXXXXXXXX with the phone number of your message sender.                 ORDER BY _id DESC LIMIT 1;" Timeout (Seconds):10 Use Root:On Store // I made a timeout for 10 seconds, if in case WhatsApp is busy accessing the database.                 Result In:%WHATSAPP_CURRREQ ] // Store the read Id and the last message on to the variable %WHATSAPP_CURRREQ         A2: If [ %WHATSAPP_CURRREQ ~R .*[wW][rR][uU].* ] // Check if the pattern of the message is correct and we are all set to send the location.                 A3: If [ %WHATSAPP_CURRREQ !~ %WHATSAPP_LASTREQ ] // Verify that the message is different from the last request. Remember every message has a unique Id.                         A4: Notify [ Title:WhatsApp location request... Text:Sending location // Just a notification that the location message is being prepared.                                 to Krati Gupta... Icon:<icon> Number:0 Permanent:On Priority:3 ] // Make a note it is a permanent notification, we will clear it later.                         A5: Secure Settings [ Configuration:Pattern Lock Disabled // I am disabling the pattern lock, that I use using the plugin Secure Settings.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure // You can download the plugin from here: https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin&hl=en                                 Settings ]                         A6: Secure Settings [ Configuration:Keyguard Disabled // Disable the keygaurd, it is useful, when your phone is on lock and you want to automate everything, even the typing.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A7: Secure Settings [ Configuration:GPS Enabled // Pretty clear, turn on the GPS and get location at A8                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A8: AutoShortcut [ Configuration:WhatsApp: Some One // I am using AutoShortcut plugin (https://play.google.com/store/apps/details?id=com.joaomgcd.autoshortcut) to start WhatsApp with the indented recipient.                                 Package:com.joaomgcd.autoshortcut Name:AutoShortcut ] // Replace Some One, actually choose it from the plugin, the right recipient.                         A9: Get Location [ Source:Any Timeout (Seconds):30 Continue Task // I am getting the location, timeout is 30 seconds, adjust it accordingly.                                 Immediately:Off Keep Tracking:Off ]                         A10: Secure Settings [ Configuration:Screen Dim // Now, this extension of the plugin Secure Settings, wakes your device so that you can type out the string on the WhatsApp app.                                 5 Seconds Package:com.intangibleobject.securesettings.plugin                                 Name:Secure Settings ]                         A11: Run Shell [ Command:input text // Now, I am using the shell script to type the text to the window, because the ‘:’ while not be typed from the Type task in Tasker.                                 LOCATION:maps.google.com/maps?q=%LOC Timeout (Seconds):0 Use Root:On // And also, this is way faster, but remember you need root for this, not for the other way of typing.                                 Store Result In: ]                         A12: Dpad [ Button:Right Repeat Times:1 ] // Focus the Send button                         A13: Dpad [ Button:Press Repeat Times:1 ] // And press it.                         A14: Dpad [ Button:Left Repeat Times:1 ] // Get back to the typing box.                         A15: Run Shell [ Command:input text LOCATION_ACCURACY:%LOCACC Timeout                                 (Seconds):0 Use Root:On Store Result In: ]                         A16: Dpad [ Button:Right Repeat Times:1 ]                         A17: Dpad [ Button:Press Repeat Times:1 ]                         A18: Dpad [ Button:Left Repeat Times:1 ]                         A19: Run Shell [ Command:input text BATTERY_LEVEL:%BATT% Timeout // I am adding Battery level in my case as well.                                 (Seconds):0 Use Root:On Store Result In: ]                         A20: Dpad [ Button:Right Repeat Times:1 ]                         A21: Dpad [ Button:Press Repeat Times:1 ]                         A22: Variable Set [ Name:%WHATSAPP_LASTREQ To:%WHATSAPP_CURRREQ Do // And now, we say, request is done.                                 Maths:Off Append:Off ]                         A23: Button [ Button:Back ] // I am exiting the WhatsApp nicely and not killing it. If you are the murderer kind, kill it, just know, you don’t have any place in the heaven.                         A24: Button [ Button:Back ]                         A25: Notify Cancel [ Title: Warn Not Exist:Off ] // Remove the permanent notification.                         A26: Notify [ Title:WhatsApp location request Text:Location sent // Make a temporary notification, and say, location is sent.                                 successfully. Icon:<icon> Number:0 Permanent:Off Priority:3 ]                                                         A27: Secure Settings [ Configuration:GPS Disabled // Disable all the horrible things we turned on earlier.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A28: Secure Settings [ Configuration:Pattern Lock Enabled                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A29: Secure Settings [ Configuration:Keyguard Enabled                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                 A30: End If         A31: End If Download this Task from here: http://db.tt/9vRmbhyb That’s it in the above small example – you can read/write messages from/to WhatsApp app. I am using n7000-cm9.1-cwr6. Oh yea, and if you are having the Talkback auto enabled for Chrome browser, you need to turn Off the Web scripts to run. Tasker is amazing, I have automated a lot of tasks using this tool. I will share a few none generic ones with you in my coming post here.

  Read the article

• May 20th Links: ASP.NET MVC, ASP.NET, .NET 4, VS 2010, Silverlight

  - by ScottGu

  Here is the latest in my link-listing series.  Also check out my VS 2010 and .NET 4 series and ASP.NET MVC 2 series for other on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET MVC How to Localize an ASP.NET MVC Application: Michael Ceranski has a good blog post that describes how to localize ASP.NET MVC 2 applications. ASP.NET MVC with jTemplates Part 1 and Part 2: Steve Gentile has a nice two-part set of blog posts that demonstrate how to use the jTemplate and DataTable jQuery libraries to implement client-side data binding with ASP.NET MVC. CascadingDropDown jQuery Plugin for ASP.NET MVC: Raj Kaimal has a nice blog post that demonstrates how to implement a dynamically constructed cascading dropdownlist on the client using jQuery and ASP.NET MVC. How to Configure VS 2010 Code Coverage for ASP.NET MVC Unit Tests: Visual Studio enables you to calculate the “code coverage” of your unit tests.  This measures the percentage of code within your application that is exercised by your tests – and can give you a sense of how much test coverage you have.  Gunnar Peipman demonstrates how to configure this for ASP.NET MVC projects. Shrinkr URL Shortening Service Sample: A nice open source application and code sample built by Kazi Manzur that demonstrates how to implement a URL Shortening Services (like bit.ly) using ASP.NET MVC 2 and EF4.  More details here. Creating RSS Feeds in ASP.NET MVC: Damien Guard has a nice post that describes a cool new “FeedResult” class he created that makes it easy to publish and expose RSS feeds from within ASP.NET MVC sites. NoSQL with MongoDB, NoRM and ASP.NET MVC Part 1 and Part 2: Nice two-part blog series by Shiju Varghese on how to use MongoDB (a document database) with ASP.NET MVC.  If you are interested in document databases also make sure to check out the Raven DB project from Ayende. Using the FCKEditor with ASP.NET MVC: Quick blog post that describes how to use FCKEditor – an open source HTML Text Editor – with ASP.NET MVC. ASP.NET Replace Html.Encode Calls with the New HTML Encoding Syntax: Phil Haack has a good blog post that describes a useful way to quickly update your ASP.NET pages and ASP.NET MVC views to use the new <%: %> encoding syntax in ASP.NET 4.  I blogged about the new <%: %> syntax – it provides an easy and concise way to HTML encode content. Integrating Twitter into an ASP.NET Website using OAuth: Scott Mitchell has a nice article that describes how to take advantage of Twiter within an ASP.NET Website using the OAuth protocol – which is a simple, secure protocol for granting API access. Creating an ASP.NET report using VS 2010 Part 1, Part 2, and Part 3: Raj Kaimal has a nice three part set of blog posts that detail how to use SQL Server Reporting Services, ASP.NET 4 and VS 2010 to create a dynamic reporting solution. Three Hidden Extensibility Gems in ASP.NET 4: Phil Haack blogs about three obscure but useful extensibility points enabled with ASP.NET 4. .NET 4 Entity Framework 4 Video Series: Julie Lerman has a nice, free, 7-part video series on MSDN that walks through how to use the new EF4 capabilities with VS 2010 and .NET 4.  I’ll be covering EF4 in a blog series that I’m going to start shortly as well. Getting Lazy with System.Lazy: System.Lazy and System.Lazy<T> are new features in .NET 4 that provide a way to create objects that may need to perform time consuming operations and defer the execution of the operation until it is needed.  Derik Whittaker has a nice write-up that describes how to use it. LINQ to Twitter: Nifty open source library on Codeplex that enables you to use LINQ syntax to query Twitter. Visual Studio 2010 Using Intellitrace in VS 2010: Chris Koenig has a nice 10 minute video that demonstrates how to use the new Intellitrace features of VS 2010 to enable DVR playback of your debug sessions. Make the VS 2010 IDE Colors look like VS 2008: Scott Hanselman has a nice blog post that covers the Visual Studio Color Theme Editor extension – which allows you to customize the VS 2010 IDE however you want. How to understand your code using Dependency Graphs, Sequence Diagrams, and the Architecture Explorer: Jennifer Marsman has a nice blog post describes how to take advantage of some of the new architecture features within VS 2010 to quickly analyze applications and legacy code-bases. How to maintain control of your code using Layer Diagrams: Another great blog post by Jennifer Marsman that demonstrates how to setup a “layer diagram” within VS 2010 to enforce clean layering within your applications.  This enables you to enforce a compiler error if someone inadvertently violates a layer design rule. Collapse Selection in Solution Explorer Extension: Useful VS 2010 extension that enables you to quickly collapse “child nodes” within the Visual Studio Solution Explorer.  If you have deeply nested project structures this extension is useful. Silverlight and Windows Phone 7 Building a Simple Windows Phone 7 Application: A nice tutorial blog post that demonstrates how to take advantage of Expression Blend to create an animated Windows Phone 7 application. If you haven’t checked out my Windows Phone 7 Twitter Tutorial I also recommend reading that. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

  Read the article

• Agile Testing Days 2012 – Day 1 – The birth of the #unicorn…

  - by Chris George

  Still riding the high from the tutorial day, I arrived at the conference venue eager to get cracking with the days talks. The opening Keynote was “Disciplined Agile Delivery: The Foundation for Scaling Agile” presented by Scott Ambler. The general ideas behind the methodology such as not re-inventing the wheel, and being goal driven, not prescriptive in how you work certainly struck chords with how we are trying to work in my team. Scott made some interesting observations about how scrum is quite prescriptive and is this really agile? I agreed with quite a few of his points on how what works for one team may not work for another. How a team works should be driven by context and reflection, not process and prescription. However was somewhat dubious about some of the statistics he rolled out towards the end. However, out of this keynote was born something that was to transcend this one presentation. During the talk, Scott mentioned on more than one occasion “In the real world”, and at one point made reference to people living in the land of unicorns and rainbows. The challenge was then laid down on twitter for all speakers to include a unicorn in their presentations… and for the most part this happened! It became an identity for this years conference, and I’m sure something that any attendee will always associate with Agile Testing Days 2012! Following this keynote, I attended “Going agile with Automated GUI Testing – Some personal insights” by Jan Zdunek from codecentric on the vendor track. My speciality is test automation, and in particular GUI testing, so this drew me to this talk more than the others. Thankfully, it was made clear from the very start that this was not peddling any particular product (even though it was on the vendor track), and Jan faithfully stuck to that. Most of the content was not new to me, but it was really comforting to hear someone else with very similar experiences to my own. In particular, things like how GUI testing is hard and is not a silver bullet; how record & replay is NOT a good thing to do (which drew a somewhat inflammatory tweet from an automation company when I tweeted that!). Something that I have started hearing around the place, and has certainly been murmuring at work is to push more of the automation coding onto the developers. After all they are the coding experts. I agree with this to a degree, but I personally enjoy coding and find it very rewarding doing so, therefore I’d be reluctant to give it up. I think there are some better alternatives such as pairing with a developer. Lastly, Jan mentioned, almost in passing, that we should consider virtualisation for gui testing for covering configuration combinations. On my project we’ve been running our win32/.NET GUI tests in cloud virtualisation for a couple of years now… I really should write about that! After lunch the second keynote of the day was by Lisa Crispin and Janet Gregory,”Myths about Agile Testing, De-Bunked”. It started off well… with the two ladies donning Medusa style head bands whilst they disbanding several myths about agile testing! I got the impression that it was perhaps not as slick as they would have liked, but then Janet was suffering with a very sore throat so kept losing her voice. Nevertheless, the presentation was captivating, and they debunked several myths such as : “Testing is dead”, “Testers must write code”, “Agile teams always deliver faster”. I didn’t take many notes for this because it was being recorded, but unfortunately the recordings have not been posted yet so I’ll write more about this when they are. The TestLab was held during a somewhat free for all time during most of the afternoon. It looked intriguing and proved to be one of the surprising experiences of the conference for me. Run by James Lyndsay and Bart Knaack, it consisted of a number of ‘stations’ that offered different testing problems. I opted for testing a mathematical drawing app call Geogebra, the task being to pair up and exploratory test it. After an allotted time, we discussed issues we’d found and decided if we wanted to continue ‘playing’ to which we all agreed! It was fun! The last track talk of the day was “Developers Exploratory Testing – Raising the bar” by Sigge Birgisson. One of the teams at Red Gate have tried Dev or Team exploratory testing a couple of times, and I was really interested to go to the presentation that prompted that. I was not disappointed! Sigge gave a first class presentation, and not only explained what DET was all about, but also how to go about implementing it. Little tips like calling it a ‘workshop’ rather than ‘testing’ I can really see working! Monday evening saw the presentation of the award for the Most Influential Agile Testing Professional Person go to a much deserved Lisa Crispin. The evening was great, with acrobatics, magic and music. My Takeaway Triple from Day 1:  Some of the cool stuff that was suggested in the GUI Testing talk, we are already doing. I should write about that! Testing is not dead! Perhaps testing will become more of a skill than a specific role, but it is certainly not dead. Team/Developer exploratory testing… seems like a no-brainer assuming you have a team who is willing.  Day 2 – Coming soon…

  Read the article

• Steps for MySQL DB Replication

  - by Manish Agrawal

  Following are the steps for MySQL Replication implementation on Linux machine: Pre-implementation steps for DB Replication:   1.    Identify the databases to be replicated 2.    Identify the tables to be ignored during replication per database for example log tables 3.  Carefully identify and replace the variables and paths(locations) mentioned (in bold) in the commands given below with appropriate values 4.  Schedule the maintenance activity in odd hours as these activities will affect all the databases on Master database server       Implementation steps for DB Replication:     1.    Configure the /etc/my.cnf file on Master database server to enable Binary logging, setting of server id and configuring of dbnames for which logging should be done. [mysqld] log-bin=mysql-bin server-id=1 binlog-do-db = dbname   Note: You can specify multiple DB in binlog-do-db by using comma separated dbname values like: dbname1, dbname2, …, dbnameN   2.    On Master database, Grant Replication Slave Privileges, by executing following command on mysql prompt mysql> GRANT REPLICATION SLAVE ON *.* TO slaveuser@<hostname> identified by ‘slavepassword’;   3.    Stop the Master & Slave database by giving the command      mysqladmin shutdown   4.    Start the Master database by giving the command      /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user&     5.    mysql> FLUSH TABLES WITH READ LOCK; Note: Leave the client (putty session) from which you issued the FLUSH TABLES statement running, so that the read lock remains in effect. If you exit the client, the lock is released. 6.    mysql > SHOW MASTER STATUS;          +---------------+----------+--------------+------------------+          | File          | Position | Binlog_Do_DB | Binlog_Ignore_DB |          +---------------+----------+--------------+------------------+          | mysql-bin.003 | 117       | dbname       |                  |          +---------------+----------+--------------+------------------+ Note: Note this information as this will be required while starting of Slave and replication in later steps   7.    Take MySQL dump by giving the following command, In another session window (putty window) run the following command: mysqldump –u user --ignore-table=dbname.tbl_name -–ignore-table=dbname.tbl_name2 --master-data dbname > dbname_dump.db Note: When choosing databases to include in the dump, remember that you will need to filter out databases on each slave that you do not want to include in the replication process.     8.    Unlock the tables on Master by giving following command: mysql> UNLOCK TABLES;   9.    Copy the dump file to Slave DB server   10.  Startup the Slave by using option --skip-slave      /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user --skip-slave&   11.  Restore the dump file on Slave DB server      mysql –u user dbname < dbname_dump.db   12.  Stop the Slave database by giving the command      mysqladmin shutdown   13.  Configure the /etc/my.cnf file on the Slave database server [mysqld] server-id=2 replicate-ignore-table = dbname.tablename   14.  Start the Slave Mysql Server with 'replicate-do-db=DB name' option.      /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user --replicate-do-db=dbname --skip-slave   15.  Configure the settings at Slave server for Master host name, log filename and position within the log file as shown in Step 6 above Use Change Master statement in the MySQL session mysql> CHANGE MASTER TO MASTER_HOST='<master_host_name>', MASTER_USER='<replication_user_name>', MASTER_PASSWORD='<replication_password>', MASTER_LOG_FILE='<recorded_log_file_name>', MASTER_LOG_POS=<recorded_log_position>;   16.  On Slave Servers mysql prompt give the following command: a.     mysql > START SLAVE; b.    mysql > SHOW SLAVE STATUS;         Note: To stop slave for backup or any other activity you can use the following command on the Slave Servers mysql prompt: mysql> STOP SLAVE     Refer following links for more information on MySQL DB Replication: http://dev.mysql.com/doc/refman/5.0/en/replication-options.html http://crazytoon.com/2008/04/21/mysql-replication-replicate-by-choice/ http://dev.mysql.com/doc/refman/5.0/en/mysqldump.html

  Read the article

• Ok it has been pointed out to me

  - by Ratman21

  That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

  Read the article

• Uploadify with ruby on rails 'bad content body' 500 Internal Server Error

  - by Mr_Nizzle

  I'm Getting this error in my development log while uploadify is uploading the file and in the view i get an 'IO ERROR' beside filename. /!\ FAILSAFE /!\ Thu Mar 18 11:54:53 -0500 2010 Status: 500 Internal Server Error bad content body /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/utils.rb:351:in `parse_multipart' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/utils.rb:323:in `loop' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/utils.rb:323:in `parse_multipart' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/request.rb:133:in `POST' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/methodoverride.rb:15:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/params_parser.rb:15:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/session/cookie_store.rb:93:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/reloader.rb:29:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/failsafe.rb:26:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `synchronize' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.3/lib/action_controller/dispatcher.rb:106:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/content_length.rb:13:in `call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/handler/fastcgi.rb:58:in `serve' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:103:in `process_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:153:in `with_signal_handler' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:101:in `process_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:78:in `process_each_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:77:in `each' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:77:in `process_each_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:76:in `catch' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:76:in `process_each_request' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:51:in `process!' /usr/lib/ruby/gems/1.8/gems/rails-2.3.3/lib/fcgi_handler.rb:23:in `process!' dispatch.fcgi:24 any idea on this?

  Read the article

• c# Named Pipe Asynchronous Peeking

  - by KJ Tsanaktsidis

  Hey all, I need to find a way to be notified when a System.IO.Pipe.NamedPipeServerStream opened in asynchronous mode has more data available for reading on it- a WaitHandle would be ideal. I cannot simply use BeginRead() to obtain such a handle because it's possible that i might be signaled by another thread which wants to write to the pipe- so I have to release the lock on the pipe and wait for the write to be complete, and NamedPipeServerStream doesnt have a CancelAsync method. I also tried calling BeginRead(), then calling the win32 function CancelIO on the pipe if the thread gets signaled, but I don't think this is an ideal solution because if CancelIO is called just as data is arriving and being processed, it will be dropped- I still wish to keep this data, but process it at a later time, after the write. I suspect the win32 function PeekNamedPipe might be useful but i'd like to avoid having to continuously poll for new data with it. In the likley event that the above text is a bit unclear, here's roughly what i'd like to be able to do... NamedPipeServerStream pipe; ManualResetEvent WriteFlag; //initialise pipe lock (pipe) { //I wish this method existed WaitHandle NewDataHandle = pipe.GetDataAvailableWaithandle(); Waithandle[] BreakConditions = new Waithandle[2]; BreakConditions[0] = NewDataHandle; BreakConditions[1] = WriteFlag; int breakcode = WaitHandle.WaitAny(BreakConditions); switch (breakcode) { case 0: //do a read on the pipe break; case 1: //break so that we release the lock on the pipe break; } }

  Read the article

• quartz throws deadlocks under load

  - by Khandelwal

  We are using Quartz with Spring and our configuration is throwing deadlocks when quartz has more than 1 thread configured. I'm starting to believe that it's because we don't have our quartz configured correctly with Spring, but I can't find enough documentation on how to configure the two to play nicely. We are running on both Windows and Linux environments - pointing at MSSQL and Oracle DBs. With both OS, using either DB, we can throw the following deadlock errors... We're consistently throwing these deadlock errors. We run under heavy load, inserting hundreds of quartz triggers in a matter of minutes. 2010-03-17 18:52:31,737 [] [] ERROR [DFScheduler_Worker-42] core.ErrorLogger core.ErrorLogger (QuartzScheduler.java:2185) - An error occured while marking executed job complete. job= 'BPM.6e41a6567f0000020100362a51dc7a50' org.quartz.JobPersistenceException: Couldn't remove trigger: Transaction (Process ID 87) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. [See nested exception: com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 87) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.] at org.quartz.impl.jdbcjobstore.JobStoreSupport.removeTrigger(JobStoreSupport.java:1469)at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggeredJobComplete(JobStoreSupport.java:2978)at org.quartz.impl.jdbcjobstore.JobStoreSupport$39.execute(JobStoreSupport.java:2962) at org.quartz.impl.jdbcjobstore.JobStoreSupport$41.execute(JobStoreSupport.java:3713)at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.java:3747) at org.quartz.impl.jdbcjobstore.JobStoreSupport.executeInNonManagedTXLock(JobStoreSupport.java:3709)at org.quartz.impl.jdbcjobstore.JobStoreSupport.triggeredJobComplete(JobStoreSupport.java:2958)at org.quartz.core.QuartzScheduler.notifyJobStoreJobComplete(QuartzScheduler.java:1727)at org.quartz.core.JobRunShell.run(JobRunShell.java:273) at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534) Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 87) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source) at ... org.quartz.impl.jdbcjobstore.StdJDBCDelegate.deleteSimpleTrigger(StdJDBCDelegate.java:1820) at org.quartz.impl.jdbcjobstore.JobStoreSupport.deleteTriggerAndChildren(JobStoreSupport.java:1345 at org.quartz.impl.jdbcjobstore.JobStoreSupport.removeTrigger(JobStoreSupport.java:1453 ... 9 more

  Read the article

• Cannot use READPAST in snapshot isolation mode

  - by Marcus

  I have a process which is called from multiple threads which does the following: Start transaction Select unit of work from work table with by finding the next row where IsProcessed=0 with hints (UPDLOCK, HOLDLOCK, READPAST) Process the unit of work (C# and SQL stored procedures) Commit the transaction The idea of this is that a thread dips into the pool for the "next" piece of work, and processes it, and the locks are there to ensure that a single piece of work is not processed twice. (the order doesn't matter). All this has been working fine for months. Until today that is, when I happened to realise that despite enabling snapshot isolation and making it the default at the database level, the actual transaction creation code was manually setting an isolation level of "ReadCommitted". I duly changed that to "Snapshot", and of course immediately received the "You can only specify the READPAST lock in the READ COMMITTED or REPEATABLE READ" error message. Oops! The main reason for locking the row was to "mark the row" in such a way that the "mark" would be removed when the transaction that applied the mark was committed and the lock seemed to be the best way to do this, since this table isn't read otherwise except by these threads. If I were to use the IsProcessed flag as the lock, then presumably I would need to do the update first, and then select the row I just updated, but I would need to employ the NOLOCK flag to know whether any other thread had set the flag on a row. All sounds a bit messy. The easiest option would be to abandon the snapshot isolation mode altogether, but the design of step #3 requires it. Any bright ideas on the best way to resolve this problem? Thanks Marcus

  Read the article

• Java FileLock for Reading and Writing

  - by bobtheowl2

  I have a process that will be called rather frequently from cron to read a file that has certain move related commands in it. My process needs to read and write to this data file - and keep it locked to prevent other processes from touching it during this time. A completely separate process can be executed by a user to (potential) write/append to this same data file. I want these two processes to play nice and only access the file one at a time. The nio FileLock seemed to be what I needed (short of writing my own semaphore type files), but I'm having trouble locking it for reading. I can lock and write just fine, but when attempting to create lock when reading I get a NonWritableChannelException. Is it even possible to lock a file for reading? Seems like a RandomAccessFile is closer to what I need, but I don't see how to implement that. Here is the code that fails: FileInputStream fin = new FileInputStream(f); FileLock fl = fin.getChannel().tryLock(); if(fl != null) { System.out.println("Locked File"); BufferedReader in = new BufferedReader(new InputStreamReader(fin)); System.out.println(in.readLine()); ... The exception is thrown on the FileLock line. java.nio.channels.NonWritableChannelException at sun.nio.ch.FileChannelImpl.tryLock(Unknown Source) at java.nio.channels.FileChannel.tryLock(Unknown Source) at Mover.run(Mover.java:74) at java.lang.Thread.run(Unknown Source) Looking at the JavaDocs, it says Unchecked exception thrown when an attempt is made to write to a channel that was not originally opened for writing. But I don't necessarily need to write to it. When I try creating a FileOutpuStream, etc. for writing purposes it is happy until I try to open a FileInputStream on the same file.

  Read the article

• Svn import with auto-props & pre-commit hook

  - by James Tisato

  My company's svn repo has a lot of MS Word docs in it. We've implemented a policy that all .doc files must have the svn:needs-lock property set to prevent parallel access on files that are hard to merge (we've also done this for xls, ppt, pdf etc.). We've implemented the policy by distributing a svn config with auto-props set appropriately for all relevant document types. We've also set up a pre-commit hook that checks that all added files of these types have the needs-lock property set (i.e. if they forget/are too lazy to update their svn config file, they won't be able to add any docs to the repo). The problem I'm having, however, is that the pre-commit hook fails when users try to import files into the repo, e.g. some users like to add files directly thru TortoiseSVN's Repo Browser, which effectively is an svn import. Through testing on other file types, I have seen that doing an import does in fact apply the auto-props listed in my config, but they don't seem to be applied at the point that the pre-commit hook runs. When importing .doc files, the hook fails, saying that the needs-lock property is missing. Is there really much difference between adding a single file to a working copy and committing it vs importing a file directly? Do we need to tailor our precommit hook in some way to cater for this scenario?

  Read the article

• Java Concurrency : Synchronized(this) => and this.wait() and this.notify()

  - by jens

  Hello Experts, I would appreciate your help in understand a "Concurrency Example" from: http://forums.sun.com/thread.jspa?threadID=735386 Qute Start: public synchronized void enqueue(T obj) { // do addition to internal list and then... this.notify(); } public synchronized T dequeue() { while (this.size()==0) { this.wait(); } return // something from the queue } Quote End: My Question is: Why is this code valid? = When I synchronize a method like "public synchronized" = then I synchronize on the "Instance of the Object == this". However in the example above: Calling "dequeue" I will get the "lock/monitor" on this Now I am in the dequeue method. As the list is zero, the calling thread will be "waited" From my understanding I have now a deadlock situation, as I will have no chance of ever enquing an object (from an nother thread), as the "dequeue" method is not yet finised and the dequeue "method" holds the lock on this: So I will never ever get the possibility to call "enequeue" as I will not get the "this" lock. Backround: I have exactly the same problem: I have some kind of connection pool (List of Connections) and need to block if all connections are checked. What is the correct way to synchronize the List to block, if size exceeds a limit or is zero? Thank you very much Jens

  Read the article

• SQL Concurrent test update question

  - by ptoinson

  Howdy Folks, I have a SQLServer 2008 database in which I have a table for Tags. A tag is just an id and a name. The definition of the tags table looks like: CREATE TABLE [dbo].[Tag]( [ID] [int] IDENTITY(1,1) NOT NULL, [Name] [varchar](255) NOT NULL CONSTRAINT [PK_Tag] PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ) Name is also a unique index. further I have several processes adding data to this table at a pretty rapid rate. These processes use a stored proc that looks like: ALTER PROC [dbo].[lg_Tag_Insert] @Name varchar(255) AS DECLARE @ID int SET @ID = (select ID from Tag where Name=@Name ) if @ID is null begin INSERT Tag(Name) VALUES (@Name) RETURN SCOPE_IDENTITY() end else begin return @ID end My issues is that, other than being a novice at concurrent database design, there seems to be a race condition that is causing me to occasionally get an error that I'm trying to enter duplicate keys (Name) into the DB. The error is: Cannot insert duplicate key row in object 'dbo.Tag' with unique index 'IX_Tag_Name'. This makes sense, I'm just not sure how to fix this. If it where code I would know how to lock the right areas. SQLServer is quite a different beast. First question is what is the proper way to code this 'check, then update pattern'? It seems I need to get an exclusive lock on the row during the check, rather than a shared lock, but it's not clear to me the best way to do that. Any help in the right direction will be greatly appreciated. Thanks in advance.

  Read the article

• In .NET when Aborting Thread, can this piece of code get corrupted?

  - by bosko

  Little intro: In complex multithreaded aplication (enterprise service bus EBS), I need to use Thread.Abort, because this EBS accepts user written modules which communicates with hardware security modules. So if this module gets deadlocked or hardware stops responding - i need to just unload this module and rest of this server aplication must keep runnnig. So there is abort sync mechanism which ensures that code can be aborted only in user section and this section must be marked as AbortAble. If this happen there is possibility that ThreadAbortException will be thrown in this pieace of code: public void StopAbortSection() { var id = Thread.CurrentThread.ManagedThreadId; lock (threadIdMap[id]) { .... } } If module is on AbortSection and Aplication decides to abort module, but after this decision but before actual Thread.Abort, module enters NonAbortableSection by calling this method, but lock is actualy taken on that locking object. So lock will block until Abort or abort can be executed before reaching this block by this code. But Object with this method is essential and i need to be sure that this pieace of code is safe to abort in any moment. Probably i have to mention that threadIdMap is Dictionary(int,ManualResetEvent), so locking object is instance of ManualResetEvent. I hope you now understad my question. Sorry for its largeness.

  Read the article

• How to program critical section for reader-writer systems?

  - by Srinivas Nayak

  Hi, Lets say, I have a reader-writer system where reader and writer are concurrently running. 'a' and 'b' are two shared variables, which are related to each other, so modification to them needs to be an atomic operation. A reader-writer system can be of the following types: rr ww r-w r-ww rr-w rr-ww where [ r : single reader rr: multiple reader w : single writer ww: multiple writer ] Now, We can have a read method for a reader and a write method for a writer as follows. I have written them system type wise. rr read_method { read a; read b; } ww write_method { lock(m); write a; write b; unlock(m); } r-w r-ww rr-w rr-ww read_method { lock(m); read a; read b; unlock(m); } write_method { lock(m); write a; write b; unlock(m); } For multiple reader system, shared variable access doesn't need to be atomic. For multiple writer system, shared variable access need to be atomic, so locked with 'm'. But, for system types 3 to 6, is my read_method and write_method correct? How can I improve? Sincerely, Srinivas Nayak

  Read the article

• Delete throws "deleted object would be re-saved by cascade"

  - by Greg

  I have following model: <class name="Person" table="Person" optimistic-lock="version"> <id name="Id" type="Int32" unsaved-value="0"> <generator class="native" /> </id> <!-- plus some properties here --> </class> <class name="Event" table="Event" optimistic-lock="version"> <id name="Id" type="Int32" unsaved-value="0"> <generator class="native" /> </id> <!-- plus some properties here --> </class> <class name="PersonEventRegistration" table="PersonEventRegistration" optimistic-lock="version"> <id name="Id" type="Int32" unsaved-value="0"> <generator class="native" /> </id> <property name="IsComplete" type="Boolean" not-null="true" /> <property name="RegistrationDate" type="DateTime" not-null="true" /> <many-to-one name="Person" class="Person" column="PersonId" foreign-key="FK_PersonEvent_PersonId" cascade="all-delete-orphan" /> <many-to-one name="Event" class="Event" column="EventId" foreign-key="FK_PersonEvent_EventId" cascade="all-delete-orphan" /> </class> There are no properties pointing to PersonEventRegistration either in Person nor in Event. When I try to delete an entry from PersonEventRegistration, I get the following error: "deleted object would be re-saved by cascade" The problem is, I don't store this object in any other collection - the delete code looks like this: public bool UnregisterFromEvent(Person person, Event entry) { var registrationEntry = this.session .CreateCriteria<PersonEventRegistration>() .Add(Restrictions.Eq("Person", person)) .Add(Restrictions.Eq("Event", entry)) .Add(Restrictions.Eq("IsComplete", false)) .UniqueResult<PersonEventRegistration>(); bool result = false; if (null != registrationEntry) { using (ITransaction tx = this.session.BeginTransaction()) { this.session.Delete(registrationEntry); tx.Commit(); result = true; } } return result; } What am I doing wrong here?

  Read the article

• Atomic int writes on file

  - by Waneck

  Hello! I'm writing an application that will have to be able to handle many concurrent accesses to it, either by threads as by processes. So no mutex'es or locks should be applied to this. To make the use of locks go down to a minimum, I'm designing for the file to be "append-only", so all data is first appended to disk, and then the address pointing to the info it has updated, is changed to refer to the new one. So I will need to implement a small lock system only to change this one int so it refers to the new address. How is the best way to do it? I was thinking about maybe putting a flag before the address, that when it's set, the readers will use a spin lock until it's released. But I'm afraid that it isn't at all atomic, is it? e.g. a reader reads the flag, and it is unset on the same time, a writer writes the flag and changes the value of the int the reader may read an inconsistent value! I'm looking for locking techniques but all I find is either for thread locking techniques, or to lock an entire file, not fields. Is it not possible to do this? How do append-only databases handle this? Thanks! Cauê

  Read the article

• How did this happen?? Git error? Some other fluke?

  - by marfarma

  Every file in this Rails project is duplicated with a -e and again with a -e-e tacked onto the end of it, like the following. It's that way in my GitHub repository too. But I can't figure out how it happened. Any clue? Google searching comes up empty. -rw-r--r--@ 1 usrname staff 959 Jan 7 02:13 Gemfile -rw-r--r-- 1 usrname staff 958 Jan 5 01:10 Gemfile-e -rw-r--r-- 1 usrname staff 958 Jan 5 01:09 Gemfile-e-e -rw-r--r-- 1 usrname staff 6650 Jan 7 02:13 Gemfile.lock -rw-r--r-- 1 usrname staff 6650 Jan 5 01:10 Gemfile.lock-e -rw-r--r-- 1 usrname staff 6650 Jan 5 01:09 Gemfile.lock-e-e lrwxr-xr-x 1 usrname staff 18 Jan 5 00:37 README.rdoc - doc/README_FOR_APP -rw-r--r-- 1 usrname staff 283 Jan 5 01:10 Rakefile -rw-r--r-- 1 usrname staff 283 Jan 5 01:10 Rakefile-e -rw-r--r-- 1 usrname staff 283 Jan 5 01:09 Rakefile-e-e drwxr-xr-x 6 usrname staff 204 Jan 5 00:37 app drwxr-xr-x 5 usrname staff 170 Jan 5 01:10 autotest drwxr-xr-x 28 usrname staff 952 Jan 5 01:15 config -rw-r--r-- 1 usrname staff 173 Jan 5 01:10 config.ru -rw-r--r-- 1 usrname staff 173 Jan 5 01:10 config.ru-e -rw-r--r-- 1 usrname staff 173 Jan 5 01:09 config.ru-e-e

  Read the article

• SQLite transaction doesn't work as expected

  - by troll

  I prepared 2 files, "1.php" and "2.php". "1.php" is like this. <?php $dbh = new PDO('sqlite:test1'); $dbh->beginTransaction(); print "aaa<br>"; sleep(55); $dbh->commit(); print "bbb"; ?> and "2.php" is like this. <?php $dbh = new PDO('sqlite:test1'); $dbh->beginTransaction(); print "ccc<br>"; $dbh->commit(); print "ddd"; ?> and I excute "1.php". It starts a transaction and waits 55 seconds. So when I immediately excute "2.php", my expectation is this: "1.php" is getting transaction and "1" holds a database lock "2" can not begin a transaction "2" can not get database lock so "2" have to wait 55 seconds BUT, but the test went another way. When I excute "2",then "2" immediately returned it's result "2" did not wait so I have to think that "1" could not get transaction, or could not get database lock. Can anyone help?

  Read the article

• File Locked by Services (after service code reading the text file)

  - by rvpals

  I have a windows services written in C# .NET. The service is running on a internal timer, every time the interval hits, it will go and try to read this log file into a String. My issue is every time the log file is read, the service seem to lock the log file. The lock on that log file will continue until I stop the windows service. At the same time the service is checking the log file, the same log file needs to be continuously updated by another program. If the file lock is on, the other program could not update the log file. Here is the code I use to read the text log file. private string ReadtextFile(string filename) { string res = ""; try { System.IO.FileStream fs = new System.IO.FileStream(filename, System.IO.FileMode.Open, System.IO.FileAccess.Read); System.IO.StreamReader sr = new System.IO.StreamReader(fs); res = sr.ReadToEnd(); sr.Close(); fs.Close(); } catch (System.Exception ex) { HandleEx(ex); } return res; } Thank you.

  Read the article

• Any way to turn off quips in OOWeb?

  - by Misha Koshelev

  http://ooweb.sourceforge.net/tutorial.html Not really a question, but I can't seem to stop writing stuff like this. Maybe someone will find it useful. I know rewriting an HTTP server is not the way to turn off the quips ;) /* Copyright 2010 Misha Koshelev. All Rights Reserved. */ package com.mksoft.common; import java.io.BufferedReader; import java.io.InputStreamReader; import java.io.IOException; import java.io.PrintWriter; import java.io.UnsupportedEncodingException; import java.net.URLDecoder; import java.text.SimpleDateFormat; import java.util.Date; import java.util.LinkedHashMap; import java.net.ServerSocket; import java.net.Socket; /** * Simple HTTP Server. * * @author Misha Koshelev */ public class HttpServer extends Thread { /* * Constants */ /** * 404 Not Found Result */ protected final static String result404NotFound="<html><head><title>404 Not Found</title></head><body bgcolor='#ffffff'><h1>404 Not Found</h1></body></html>"; /* * Variables */ /** * Port on which HTTP server handles requests. */ protected int port; public int getPort() { return port; } public void setPort(int _port) { port=_port; } /* * Constructors */ public HttpServer(int _port) { setPort(_port); } /* * Helpers */ /** * Errors */ protected void error(String message) { System.err.println(message); System.err.flush(); } /** * Debugging */ protected boolean debugOutput=true; protected void debug(String message) { if (debugOutput) { error(message); } } /** * Lock object */ private Object lock=new Object(); /** * Should we quit? */ protected boolean doQuit=false; /** * Are we done? */ protected boolean areWeDone=false; /** * Process POST request headers */ protected String processPostRequest(String url,LinkedHashMap<String,String> headers,String inputLine) { debug("HttpServer.processPostRequest: url=\""+url); if (debugOutput) { for (String key: headers.keySet()) { debug("HttpServer.processPostRequest: headers."+key+"=\""+headers.get(key)+"\""); } } debug("HttpServer.processPostRequest: inputLine=\""+inputLine+"\""); try { inputLine=new URLDecoder().decode(inputLine,"UTF-8"); } catch (UnsupportedEncodingException uee) { uee.printStackTrace(); } String[] keyValues=inputLine.split("&"); LinkedHashMap<String,String> post=new LinkedHashMap<String,String>(); for (int i=0;i<keyValues.length;i++) { String keyValue=keyValues[i]; int equals=keyValue.indexOf('='); String key=keyValue.substring(0,equals); String value=keyValue.substring(equals+1); post.put(key,value); } return post(url,headers,post); } /** * Server loop (here for exception handling purposes) */ protected void serverLoop() throws IOException { /* Start server socket */ ServerSocket serverSocket=null; try { serverSocket=new ServerSocket(getPort()); } catch (IOException ioe) { ioe.printStackTrace(); System.exit(1); } Socket clientSocket=null; while (true) { /* Quit if necessary */ if (doQuit) { break; } /* Accept incoming connections */ try { clientSocket=serverSocket.accept(); } catch (IOException ioe) { ioe.printStackTrace(); System.exit(1); } /* Read request */ BufferedReader in=null; String inputLine=null; String firstLine=null; String blankLine=null; LinkedHashMap<String,String> headers=new LinkedHashMap<String,String>(); try { in=new BufferedReader(new InputStreamReader(clientSocket.getInputStream())); while (true) { if (blankLine==null) { inputLine=in.readLine(); } else { /* POST request, read Content-length bytes */ int contentLength=new Integer(headers.get("Content-Length")).intValue(); StringBuilder sb=new StringBuilder(contentLength); for (int i=0;i<contentLength;i++) { sb.append((char)in.read()); } inputLine=sb.toString(); break; } if (firstLine==null) { firstLine=inputLine; } else if (blankLine==null) { if (inputLine.equals("")) { if (firstLine.startsWith("GET ")) { break; } blankLine=inputLine; } else { int colon=inputLine.indexOf(": "); String key=inputLine.substring(0,colon); String value=inputLine.substring(colon+2); headers.put(key,value); } } } } catch (IOException ioe) { ioe.printStackTrace(); } /* Process request */ String result=null; firstLine=firstLine.replaceAll(" HTTP/.*",""); if (firstLine.startsWith("GET ")) { result=get(firstLine.replaceFirst("GET ",""),headers); } else if (firstLine.startsWith("POST ")) { result=processPostRequest(firstLine.replaceFirst("POST ",""),headers,inputLine); } else { error("HttpServer.ServerLoop: Unhandled request \""+firstLine+"\""); } debug("HttpServer.ServerLoop: result=\""+result+"\""); /* Send response */ PrintWriter out=null; try { out=new PrintWriter(clientSocket.getOutputStream(),true); } catch (IOException ioe) { ioe.printStackTrace(); } if (result!=null) { out.println("HTTP/1.1 200 OK"); } else { out.println("HTTP/1.0 404 Not Found"); result=result404NotFound; } Date now=new Date(); out.println("Date: "+new SimpleDateFormat("EEE, d MMM yyyy HH:mm:ss z").format(now)); out.println("Content-Type: text/html; charset=UTF-8"); out.println("Content-Length: "+result.length()); out.println(""); out.print(result); /* Clean up */ out.close(); if (in!=null) { in.close(); } clientSocket.close(); } serverSocket.close(); areWeDone=true; synchronized(lock) { lock.notifyAll(); } } /* * Methods */ /** * Run server on port specified in constructor. */ public void run() { try { serverLoop(); } catch (IOException ioe) { ioe.printStackTrace(); System.exit(1); } } /** * Process GET request (should be overwritten). */ public String get(String url,LinkedHashMap<String,String> headers) { debug("HttpServer.get: url=\""+url+"\""); if (debugOutput) { for (String key: headers.keySet()) { debug("HttpServer.get: headers."+key+"=\""+headers.get(key)+"\""); } } if (url.equals("/")) { return "<html><head><title>HttpServer GET Test Page</title></head>\r\n"+ "<body bgcolor='#ffffff'>\r\n"+ "<center><h1>HttpServer GET Test Page</h1></center>\r\n"+ "<hr />\r\n"+ "<center><table>\r\n"+ "<form method='post' action='/'>\r\n"+ "<tr><td align=right>Test 1:</td>\r\n"+ " <td><input type='text' name='text 1' value='test me !!! !@#$'></td></tr>\r\n"+ "<tr><td align=right>Test 2:</td>\r\n"+ " <td><input type='text' name='text 2' value='type smthng'></td></tr>\r\n"+ "<tr><td>&nbsp;</td>\r\n"+ " <td align=right><input type='submit' value='Submit'></td></tr>\r\n"+ "</form>\r\n"+ "</table></center>\r\n"+ "<hr />\r\n"+ "<center><a href='/quit'>Shutdown Server</a></center>\r\n"+ "</html>"; } else if (url.equals("/quit")) { quit(); return ""; } else { return null; } } /** * Process POST request (should be overwritten). */ public String post(String url,LinkedHashMap<String,String> headers,LinkedHashMap<String,String> post) { debug("HttpServer.post: url=\""+url+"\""); if (debugOutput) { for (String key: headers.keySet()) { debug("HttpServer.post: headers."+key+"=\""+headers.get(key)+"\""); } } if (url.equals("/")) { String result="<html><head><title>HttpServer Post Test Page</title></head>\r\n"+ "<body bgcolor='#ffffff'>\r\n"+ "<center><h1>HttpServer Post Test Page</h1></center>\r\n"+ "<hr />\r\n"+ "<center><table>\r\n"+ "<tr><th>Key</th><th>Value</th></tr>\r\n"; for (String key: post.keySet()) { result+="<tr><td align=right>"+key+"</td><td align=left>"+post.get(key)+"</td></tr>\r\n"; } result+="</table></center>\r\n"+ "</html>"; return result; } else { return null; } } /** * Wait for server to quit. */ public void waitForCompletion() { while (areWeDone==false) { synchronized(lock) { try { lock.wait(); } catch (InterruptedException ie) { } } } } /** * Shutdown server. */ public void quit() { doQuit=true; } }

  Read the article

• How to deserialize implementation classes in OSGi

  - by Daniel Schneller

  In an eRCP OSGi based application the user can push a button and go to a lock screen similar to that of Windows or Mac OS X. When this happens, the current state of the application is serialized to a file and control is handed over to the lock screen. In this mobile application memory is very tight, so we need to get rid of the original view/controller when the lock screen comes up. This works fine and we end up with a binary serialized file. Once the user logs back in, the file is read in again and the original state of the application restored. This works fine as well, except when the controller that was serialized contained a reference to an object which comes from a different bundle. In my concrete case the original controller (from bundle A) can call a web service and gets a result back. Nothing fancy, just some Strings and Numbers in a simple value holder class. However the controller only sees this as a Result interface; the actual runtime object (ResultImpl) is defined and created in a different bundle (bundle B, the webservice client implementation) and returned via a service call. When the deserialization now tries to thaw the controller from the file, it throws a ClassNotFound exception, complaining about not being able to deserialize the result object, because deserialization is called from bundle A, which cannot see the ResultImpl class from bundle B. Any ideas on how to work around that? The only thing I could come up with is to clone all the individual values into another object, defined in the controller's bundle, but this seems like quite a hassle.

  Read the article

• How to improve multi-threaded access to Cache (custom implementation)

  - by Andy

  I have a custom Cache implementation, which allows to cache TCacheable<TKey> descendants using LRU (Least Recently Used) cache replacement algorithm. Every time an element is accessed, it is bubbled up to the top of the LRU queue using the following synchronized function: // a single instance is created to handle all TCacheable<T> elements public class Cache() { private object syncQueue = new object(); private void topQueue(TCacheable<T> el) { lock (syncQueue) if (newest != el) { if (el.elder != null) el.elder.newer = el.newer; if (el.newer != null) el.newer.elder = el.elder; if (oldest == el) oldest = el.newer; if (oldest == null) oldest = el; if (newest != null) newest.newer = el; el.newer = null; el.elder = newest; newest = el; } } } The bottleneck in this function is the lock() operator, which limits cache access to just one thread at a time. Question: Is it possible to get rid of lock(syncQueue) in this function while still preserving the queue integrity?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >