Search Results

Search found 11825 results on 473 pages for 'all tech stuff'.

Page 58/473 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

  - by tonyrogerson

  This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

  Read the article

• What C++ coding standard do you use?

  - by gablin

  For some time now, I've been unable to settle on a coding standard and use it concistently between projects. When starting a new project, I tend to change some things around (add a space there, remove a space there, add a line break there, an extra indent there, change naming conventions, etc.). So I figured that I might provide a piece of sample code, in C++, and ask you to rewrite it to fit your standard of coding. Inspiration is always good, I say. ^^ So here goes: #ifndef _DERIVED_CLASS_H__ #define _DERIVED_CLASS_H__ /** * This is an example file used for sampling code layout. * * @author Firstname Surname */ #include <stdio> #include <string> #include <list> #include "BaseClass.h" #include "Stuff.h" /** * The DerivedClass is completely useless. It represents uselessness in all its * entirety. */ class DerivedClass : public BaseClass { //////////////////////////////////////////////////////////// // CONSTRUCTORS / DESTRUCTORS //////////////////////////////////////////////////////////// public: /** * Constructs a useless object with default settings. * * @param value * Is never used. * @throws Exception * If something goes awry. */ DerivedClass (const int value) : uselessSize_ (0) {} /** * Constructs a copy of a given useless object. * * @param object * Object to copy. * @throws OutOfMemoryException * If necessary data cannot be allocated. */ ItemList (const DerivedClass& object) {} /** * Destroys this useless object. */ ~ItemList (); //////////////////////////////////////////////////////////// // PUBLIC METHODS //////////////////////////////////////////////////////////// public: /** * Clones a given useless object. * * @param object * Object to copy. * @return This useless object. */ DerivedClass& operator= (const DerivedClass& object) { stuff_ = object.stuff_; uselessSize_ = object.uselessSize_; } /** * Does absolutely nothing. * * @param useless * Pointer to useless data. */ void doNothing (const int* useless) { if (useless == NULL) { return; } else { int womba = *useless; switch (womba) { case 0: cout << "This is output 0"; break; case 1: cout << "This is output 1"; break; case 2: cout << "This is output 2"; break; default: cout << "This is default output"; break; } } } /** * Does even less. */ void doEvenLess () { int mySecret = getSecret (); int gather = 0; for (int i = 0; i < mySecret; i++) { gather += 2; } } //////////////////////////////////////////////////////////// // PRIVATE METHODS //////////////////////////////////////////////////////////// private: /** * Gets the secret value of this useless object. * * @return A secret value. */ int getSecret () const { if ((RANDOM == 42) && (stuff_.size() > 0) || (1000000000000000000 > 0) && true) { return 420; } else if (RANDOM == -1) { return ((5 * 2) + (4 - 1)) / 2; } int timer = 100; bool stopThisMadness = false; while (!stopThisMadness) { do { timer--; } while (timer > 0); stopThisMadness = true; } } //////////////////////////////////////////////////////////// // FIELDS //////////////////////////////////////////////////////////// private: /** * Don't know what this is used for. */ static const int RANDOM = 42; /** * List of lists of stuff. */ std::list <Stuff> stuff_; /** * Specifies the size of this object's uselessness. */ size_t uselessSize_; }; #endif

  Read the article

• Handling "related" work within a single agile work item

  - by Tesserex

  I'm on a project team of 4 devs, myself included. We've been having a long discussion on how to handle extra work that comes up in the course of a single work item. This extra work is usually things that are slightly related to the task, but not always necessary to accomplish the goal of the item (that may be an opinion). Examples include but are not limited to: refactoring of the code changed by the work item refactoring code neighboring the code changed by the item re-architecting the larger code area around the ticket. For example if an item has you changing a single function, you realize the entire class now could be redone to better accommodate this change. improving the UI on a form you just modified When this extra work is small we don't mind. The problem is when this extra work causes a substantial extension of the item beyond the original feature point estimation. Sometimes a 5 point item will actually take 13 points of time. In one case we had a 13 point item that in retrospect could have been 80 points or more. There are two options going around in our discussion for how to handle this. We can accept the extra work in the same work item, and write it off as a mis-estimation. Arguments for this have included: We plan for "padding" at the end of the sprint to account for this sort of thing. Always leave the code in better shape than you found it. Don't check in half-assed work. If we leave refactoring for later, it's hard to schedule and may never get done. You are in the best mental "context" to handle this work now, since you're waist deep in the code already. Better to get it out of the way now and be more efficient than to lose that context when you come back later. We draw a line for the current work item, and say that the extra work goes into a separate ticket. Arguments include: Having a separate ticket allows for a new estimation, so we aren't lying to ourselves about how many points things really are, or having to admit that all of our estimations are terrible. The sprint "padding" is meant for unexpected technical challenges that are direct barriers to completing the ticket requirements. It is not intended for side items that are just "nice-to-haves". If you want to schedule refactoring, just put it at the top of the backlog. There is no way for us to properly account for this stuff in an estimation, since it seems somewhat arbitrary when it comes up. A code reviewer might say "those UI controls (which you actually didn't modify in this work item) are a bit confusing, can you fix that too?" which is like an hour, but they might say "Well if this control now inherits from the same base class as the others, why don't you move all of this (hundreds of lines of) code into the base and rewire all this stuff, the cascading changes, etc.?" And that takes a week. It "contaminates the crime scene" by adding unrelated work into the ticket, making our original feature point estimates meaningless. In some cases, the extra work postpones a check-in, causing blocking between devs. Some of us are now saying that we should decide some cut off, like if the additional stuff is less than 2 FP, it goes in the same ticket, if it's more, make it a new ticket. Since we're only a few months into using Agile, what's the opinion of all the more seasoned Agile veterans around here on how to handle this?

  Read the article

• MVC Communication Pattern

  - by Kedu

  This is kind of a follow up question to this http://stackoverflow.com/questions/23743285/model-view-controller-and-callbacks, but I wanted to post it separately, because its kind of a different topic. I'm working on a multiplayer cardgame for the Android platform. I split the project into MVC which fits the needs pretty good, but I'm currently stuck because I can't figure out a good way to communicate between the different parts. I have everything setup and working with the controller being a big state machine, which is called over and over from the gameloop, and calls getter methods from the GUI and the android/network part to get the input. The input itself in the GUI and network is set by inputlisteners that set a local variable which I read in the getter method. So far so good, this is working. But my problem is, the controller has to check every input separately,so if I want to add an input I have to check in which states its valid and call the getter method from all these states. This is not good, and lets the code look pretty ugly, makes additions uncomfortable and adds redundance. So what I've got from the question I mentioned above is that some kind of command or event pattern will fit my needs. What I want to do is to create a shared and threadsafe queue in the controller and instead of calling all these getter methods, I just check the queue for new input and proceed it. On the other side, the GUI and network don't have all these getters, but instead create an event or command and send it to the controller through, for example, observer/observable. Now my problem: I can't figure out a way, for these commands/events to fit a common interface (which the queue can store) and still transport different kind of data (button clicks, cards that are played, the player id the command comes from, synchronization data etc.). If I design the communication as command pattern, I have to stick all the information that is needed to execute the command into it when its created, that's impossible because the GUI or network has no knowledge of all the things the controller needs to execute stuff that needs to be done when for example a card is played. I thought about getting this stuff into the command when executing it. But over all the different commands I have, I would need all the information the controller has, and thus give the command a reference to the controller which would make everything in it public, which is real bad design I guess. So, I could try some kind of event pattern. I have to transport data in the event. So, like the command, I would have an interface, which all events have in common, and can be stored in the shared queue. I could create a big enum with all the different events that a are possible, save one of these enums in the actual event, and build a big switch case for the events, to proceed different stuff for different events. The problem here: I have different data for all the events. But I need a common interface, to store the events in a queue. How do I get the specific data, if I can only access the event through the interface? Even if that wouldn't be a problem, I'm creating another big switch case, which looks ugly, and when i want to add a new event, I have to create the event itself, the case, the enum, and the method that's called with the data. I could of course check the event with the enum and cast it to its type, so I can call event type specific methods that give me the data I need, but that looks like bad design too.

  Read the article

• Auto-organized / smart inventory system?

  - by VeXe

  for the past week I've been working on an inventory system with Unity3D. At first I got help from the guys at Design3 but it wasn't too long till we split path, because I really didn't like the way they did their code, it didn't have any smell of OOP whatsoever. I took it further steps ahead - items take more than one slot, advanced placement system (items tries their best to find the best close fit), local mouse system (mouse gets trapped in active bag area), etc. Here's a demo of my work. What we would like to have in our game, is an auto-organizing feature - not auto-sort. We want this feature because our inventory's going to be in 'real-time' - not like in Resident Evil 1,2,3 etc where you would pause the game and do things in your inventory. Now imagine your self in a sticky situation surrounded by zombies, and you don't have bullets, you look around, you see that there are bullets nearby on the ground, so you go for them and try to pick them up, but they don't fit! you look at your inventory and find out that if you reorganize some of the items, it will fit! - now the player - in that situation doesn't have time to reorganize because he's surrounded with zombies and will die if he stops and organizes the inventory to make space (remember inventory in real-time, no pausing) - wouldn't it be nice for that to happen automatically? - Yes! (I believe this has been implemented in some games like Dungeon siege or something, so sure it's doable) take a look at this picture for example: Yes, so if you auto-sort the issue you will get your spaces but it's bad because: 1- Expensive: it doesn't need a whole sort operation to free those spaces, in the first picture, just slide the red item at the bottom to the very left, and you get the same spaces that you got from the auto-sort. 2- It's annoying to the player: "Who the F told you to re-order my stuff?" I'm not asking for "How to write the code" for this, I'm just asking for some guidance, where to look, what algorithms are involved? Is this something related to graphs and shortest path stuff? I hope not cuz I didn't manage to continue my college studies :/ But even if it is, just tell me and I will learn the stuff related. Notice there could be more than just one solution. So I guess the first thing I have to do is figure out if the situation is 'solvable' - if I know how to determine if a situation is solvable or not, then I can 'solve' it. I just need to know the conditions that makes it 'solvable'. And I believe there must be some algorithm/data structure for this. Here's a pic for more than one solution of trying to fit a 1x3 item: The arrows show just one of the solutions, but if you look you will find more than one. This is what I ultimately not auto-sorting but find a solution and applying it. Note that if I spend time on it I will come up with a way to solve it, but it wouldn't be the best way, it's like, holding a car wheel with your feet instead of your hands! XD Or just like trying to solve an issue that requires arrays, but you're not yet aware of their existence! So what is the right approach to this? Hope somebody helps, thanks a lot in advance :)

  Read the article

• Can someone explain the true landscape of Rails vs PHP deployment, particularly within the context of Reseller-based web hosting (e.g., Hostgator)?

  - by rcd

  Currently, I have a reseller account with the company HostGator. I design websites, which up until now have occasionally been wrapped in Wordpress CMSs and the like (PHP applications). I then sell hosting (of the site I've designed) to the client, which is pretty simple, in that I can simply click a button and add a new shared hosting account/site with whatever settings I want. Furthermore, I then utilize WHMCS to automate billing and account management. It's a nice package and pretty simple. I pay something like $25 a month, and can sell a hundred accounts under this (because my clients bandwidth requirements are low). Now I am finding the need to develop more customized applications, including a minimalist CMS and several proprietary things. I soon anticipate developing these apps for clients as well. Thus, I've spent the past few months learning Rails, and it's coming along well now. The thing that has nagged at me all along, though, is the deployment issue. I can't wrap my brain around it. It seems like all of the popular options (Heroku, etc) have nice automation with git and are set up in the "Rails Way". I get that (sort of). But it's terribly expensive... a single dyno, a helper, and the cheapest database (which they say is mainly suitable for testing) that isn't limited to 5MB runs $51. This is for ONE app!!! Throw in a "production" DB and you're over $200. This is like... the same prices as getting a server somewhere, right? Meanwhile, going back to what I guess is a "traditional" hosting environment with Hostgator, their server only has Ruby 1.8.7 and Rails 2.3.5... No Rails 3. AND, no Passenger (not that I really understand the difference in CGI or mod_rails or whatever, but they say Passenger is the simplest). So I'm to understand that if I build an app in Rails 3, it won't run at all on this host? But damn, I already have these accounts under my reseller account there, all running static html and/or PHP stuff, right? So what now? How do I get all of this under one simple (and affordable) roof? Forgive my ignorance, but I just don't get it. Managing a VPS is cool and all, but entails learning server admin stuff and security... And it's expensive. I get that a shared and/or reseller "server-based" (forgive the terminology) may be inadequate for large-scale apps that use a lot of bandwidth... But what about for those of us who are building real (but small and low bandwidth) apps (with Rails) and who want to deploy them simply, cheaply, using the same conceptual approach as PHP? Even after learning all of this Ruby and Rails stuff for months, I'm questioning whether it's worth it when it comes to deployment. I want to build a small app, upload it to my home directory on a shared server account, and just make it run. Why should that be so hard? Am I just choosing the wrong language/framework? Forgive my ignorance in the subject; these questions are not rhetorical; just trying to learn here. So: 1) I'd appreciate if someone could give me a good rundown of how to understand deployment in Rails vs. PHP. 2) I'd appreciate if someone could address my issue with running a hosting/web business around reseller hosting (Hostgator) while also being able to host Rails apps. Can it be done? And how can a company like Hostgator completely ignore what's current in Rails/Ruby? Thanks.

  Read the article

• Making user input/math on data fast, unlike excel type programs

  - by proGrammar

  I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

  Read the article

• Why did MAC-Adress Cloning Fix My Router?

  - by FranticPedantic

  I have a Belkin router, and about a year ago, I suddenly lost my internet connectivity from Comcast. The internet worked fine when I plugged it right into my laptop, so I just ignored it. When I moved to another apartmnet I eventually took the dive and called tech support. The tech told me to clone my MAC address which completely fixed the issue. Now I know what a MAC address is and I've read what MAC cloning is. What has bothered me since is that I don't see how this fixed the issue. As I have understood MAC address cloning, it has the router pretend it has the same MAC address as my computer. Here is why I don't understand why this fixes my issue: I have used several different computers with this router. Cloning the MAC address fixed it for ALL of my computers. The laptop I first used with my ISP was not the one that I eventually had connected when I cloned the address. Furthermore, I didn't have any problems for quite some time after I stopped using the first computer. It wasn't like the internet suddenly stopped working when I changed which laptop I was using Now it occurred to me that maybe there was some sort of expiration? Except... Which MAC address did it clone? It was just an option in the router administration page. Did it just pick whichever computer was connected to it? If my ISP still wanted the MAC of my first computer, how did some other computer's fix it? As mentioned earlier, why did this problem seemingly stem from nowhere? Anyway, I don't have any current problems so this is more just out of general curiosity. If anybody can explain it, it would be appreciated!

  Read the article

• Error installing Sony Remote Play

  - by Iszi Rory or Isznti

  I'm trying to install Remote Play software to connect my laptop to my PS3. I've found a guide with instructions which seem to be in fairly wide use (found similar walk-throughs on numerous other sites), for running the software on a non-Vaio PC. Tech-Recipies: Playstation 3 – Use Remote Play on any Windows 7 PC The setup essentially goes like this: Download Remote Play software. Download patch by NTAuthority. Install Remote Play as normal. Reboot. Extract NTAuthority patch to Remote Play program folder. Manually register patched DLLs via CLI. Run Remote Play software. Sadly, my problem is early in - Step 3. I had to use Google to find the software download, as the link from Tech-Recipies seems broken. I found the download on Sony's site here: Sony eSupport: Remote Play with PlayStation®3 After downloading and running the software, I hit "Next" at the welcome screen and "I Agree" at the EULA screen. After this, a popup informs me that Setup is checking my computer's information. Then, Setup terminates with this error: I'm running Windows 7 Ultimate x64. Is anyone familiar with this error in this software? Is there a way to work around it? Did I perhaps pick the wrong download from Sony's site?

  Read the article

• Are these computer parts compatible?

  - by Jcubed

  so I'm building a computer and i want to know if all these parts are compatible. case: http://www.amazon.com/Xion-Gaming-Steel-Tower-Computer/dp/B002139YSS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270923001&sr=8-1 power supply: http://www.amazon.com/Thermaltake-W0121RU-PurePower-Version-PCI-Express/dp/B0015MCMRG/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924656&sr=1-1 motherboard: http://www.amazon.com/GIGABYTE-GA-EP45-UD3P-LGA-Intel-Motherboard/dp/tech-data/B001HH2WE2/ref=de_a_smtd processor: http://www.amazon.com/Intel-Processor-1333MHz-LGA775-BX80570E8400/dp/B00116SLYY/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924524&sr=1-1 hard drive: http://www.amazon.com/Western-Digital-Caviar-Black-WD1001FALS/dp/B001C271MA/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924586&sr=8-1 DVD/Blu Ray Dive: http://www.amazon.com/LITE-Blu-ray-Internal-Optical-iHOS104/dp/tech-data/B002EE996Q/ref=de_a_smtd Graphics Card: http://www.amazon.com/Sapphire-Radeon-100252HDMI-PCI-Express-Graphics/dp/B001SJLLTQ/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924798&sr=1-1-spell Sound Card: http://www.amazon.com/Creative-Labs-SB0570L4-Blaster-Audigy/dp/B000LP0R3E/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924850&sr=1-1 Memory: http://www.amazon.com/Corsair-TWIN2X4096-8500C5DF-Dominator-PC2-8500-1066MHz/dp/B0014Z0Q04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924896&sr=1-1-spell OS: Ubuntu 64-bit

  Read the article

• How to setup Calendar permissions for group to group

  - by Sorean

  I've been scouring the internet and so far have only been able to find examples of how to grant calendar permissions from one user to another using the Add-MailboxFolderPermission command. This is great and it was okay for when they only had a handful of users. But going forward it's not realistic to have to set individual calendar permissions for all calendars for each new user. Layout of security groups already created. Each group has a few people assigned to it. Techs Managers Admin What I am trying to accomplish is set it up so that anyone that belongs to the Managers group can view the calendars of the Tech group. Admins can view and edit the Tech group. I've found an example of adding just the security group name but I get an error of: [PS] C:\Windows\system32add-MailboxFolderPermission -Identity Techs:\Calendar -User "Admin" -AccessRights Owner The user "Admin" is either not valid SMTP address, or there is no matching information. + CategoryInfo : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], InvalidExternalUserIdException + FullyQualifiedErrorId : 39352699,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission Am I creating groups wrong? Am I using the wrong commands? Any guidance would be greatly appreciated.

  Read the article

• How to generate thumbnails for less common video containers (mkv, ogm, mp4, flv, rmvb and mov) in wi

  - by fluxtendu

  So how to generate thumbnails for these containers? I know that the install of "DivX Plus Tech Preview: MKV on Windows 7" does it for MKV. But I think that only some registry changes are really necessary and I want it for other containers. If it's possible to avoiding the install of (always bloated) codecs packs it would be nice... Maybe only installing ffdshow or essential and separated codecs. (some time ago I have try reg files for vista without success...) Update: I have installed Win7codecs & tweaked a little its settings and I got almost everything I want. (I have also re-installed the relevant part of the divx plus tech preview to get something else than an all black preview for MKV) Issues that I still want to resolve: Find a cleaner & lighter method Almost all my rmvb and mov files got an all black preview (installing real media/quick time alternative doesn't help, is it the same with the officials?) With almost all containers (avi, mkv, ogm, mpg), I have (few) random files that don't get the preview. I could play them in WMP or another player and don't have found a pattern in the codecs used. All wmv, flv and mp4 have previews but I have less files in these containers. (I clear my thumbnails cache to test them) More generally I would like to understand how windows handle the containers & codecs to generate the previews. And a software that let me choose arbitrarily the pictures previewed would be convenient too

  Read the article

• Moving symlinks into a folder based on id3 tags.

  - by Reti

  I'm trying to get my music folder into something sensible. Right now, I have all my music stored in /home/foo so I have all of the albums soft linked to ~/music. I want the structure to be ~/music/<artist>/<album> I've got all of the symlinks into ~/music right now so I just need to get the symlinks into the proper structure. I'm trying to do this by delving into the symlinked album, getting the artist name with id3info. I can do this, but I can't seem to get it to work correctly. for i in $( find -L $i -name "*.mp3" -printf "%h\n") do echo "$i" #testing purposes #find its artist #the stuff after read file just cuts up id3info to get just the artist name #$artist = find -L $i -name "*.mp3" | read file; id3info $file | grep TPE | sed "s|.*: \(.*\)|\1|"|head -n1 #move it to correct artist folder #mv "$i" "$artist" done Now, it does find the correct folder, but every time there is a space in the dir name it makes it a newline. Here's a sample of what I'm trying to do $ ls DJ Exortius/ The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ I'm trying to mv The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ into the real directory DJ Exortius. DJ Exortius already exists, so it's just a matter of moving it into the correct directory that's based on the id3 tag of the mp3 inside. Thanks! PS: I've tried easytag, but when I restructure the album, it moves it from /home/foo which is not what I want.

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Dell R320 RAID 10 with CacheCade

  - by Geekman

  I'm looking for a higher-performance build for our 1RU Dell R320 servers, in terms of IOPS. Right now I'm fairly settled on: 4 x 600 GB 3.5" 15K RPM SAS RAID 1+0 array This should give good performance, but if possible, I want to also add an SSD Cache into the mix, but I'm not sure if there's enough room? According to the tech-specs, there's only up to 4 total 3.5" drive bays available. Is there any way to fit at least a single SSD drive along-side the 4x3.5" drives? I was hoping there's a special spot to put the cache SSD drive (though from memory, I doubt there'd be room). Or am I right in thinking that the cache drives are simply drives plugged in "normally" just as any other drive, but are nominated as CacheCade drives in the PERC controller? Are there any options for having the 4x600GB RAID 10 array, and the SSD cache drive, too? Based on the tech-specs (with up to 8x2.5" drives), maybe I need to use 2.5" SAS drives, leaving another 4 bays spare, plenty of room for the SSD cache drive. Has anyone achieved this using 3.5" drives, somehow?

  Read the article

• Are there any tests I can run on a network to simulate 100 heavy network users?

  - by marc.gayle

  I will be hosting a Ruby on Rails workshop at a small hotel in the near future, and while they have 'Wifi' everywhere on the property, and the property normally hosts 150 - 300 people, I am not 100% confident that they have hosted 150 tech people that tend to have heavy web surfing habits/needs. Their tech department is also 1 or 2 guys. Are there any automated tests I can download and run from my laptop, on the network, that would simulate 100 'heavy users' on the network at the same time? Their broadband pipe is a 15mbps cable connection. Would that suffice for the general surfing needs of 100 - 150 techies? I know all it takes is 1 or 2 bit torrenters to kill the entire network, but assuming we can at the very least block those ports or encourage the attendees not to file share on the network, would that speed suffice for general surfing needs? What are good resources online that would allow me to quickly get up to speed on the IT related issues, so that I can ask their sysadmins the right questions? Edit: Note that I am fairly technical, so assume I can get up to speed quickly even with technical manuals, etc.

  Read the article

• How do I determine how future-proof and stable a router is?

  - by Aarthi

  I mentioned in my last question that my wireless router had a bad habit of crashing. After consulting with the Super User chatroom, as well as my sysadmin, I've decided I may as well purchase a new router. However, I'm unsure how to evaluate all these tech specs that get touted about. The two things that seem to be the most important to me are: (1) keeping my router future-proof (as standards evolve and change), and (2) ensuring its stability. Unfortunately, I'm not sure what, exactly, I should be looking for in the tech specs or the item description that can give me a good idea of how stable or future-proof my decide will be. What should I look for? Can I determine stability without having to try the device out myself? Please note: I'm not a battle-hardened power user by any means, so I'll likely be reliant on the given firmware for my router. My last router lasted me like four years, so I mostly just want something that'll cover a 500 sqft apartment in New York with minimal crashing, so that I can watch Hulu in peace. And make Skype calls. If it helps, the router models that I'm currently decided between are this ASUS one and this LinkSys one.

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Embedded Windows XP

  - by Kyle

  My company acquired a brake press for bending large structural steel plates. We received it second hand and it came with an embedded copy of windows XP. Now for the part that's driving me nuts: plug and play has been turned off, also accessibility options has been disabled. What does this mean for me? Keyboards will not work! Nothing that plugs into a USB port will work and it does not have a CD ROM drive. I have tried to turn on plug and play using the on screen keyboard but it is not there since accessibility options is turned off. I would just get an updated copy of the the embedded OS but they come from Sweden and are extremely expensive. I assume there has got to be a way to get a USB devices to work. We need to get a wifi adapter on it so I can use team viewer and remotely configure it for our needs. Things to keep in mind: There is no keyboard so everything has to be done with the mouse There is no PS2 port for a keyboard just a mouse. Odd. I am 5 states away from this location and have been working with a tech who is physically installing the machine. System 32 seems to be missing A LOT of files, the tech told me there is only 8 folders in there and no other files (I don't even understand how Windows is running like this). If anyone has ANY ideas I would appreciate it, I am unsure where to go from here.

  Read the article

• How to create a WHM/cPanel account, without creating a new sub-domain?

  - by Cyclops

  I have a basic VPS (full root access), with WHM/cPanel, and am learning the ropes. I'm trying to create a new account for an existing domain (mysite.com), and so far WHM won't let me - it either wants a sub-domain or fake domain, but won't allow two accounts for one domain. In the beginning, there was only the root account, and it wouldn't let me login to cPanel - a quick chat with tech support, and I am informed that I need to create a second account, which I did. So now I have an account, call it ns1me, for domain mysite.com. Now I want to create a django account. I go through the same process, but WHM won't allow me to use mysite.com as the domain for django. The docs recommend a sub-domain, so I fill the box in with django.mysite.com. I then realize that has actually created a sub-domain - going to django.mysite.com shows me its home directory, along with helpful information about what version of Apache, Python, and other mods its running (thanks, Apache). I really don't want a sub-domain, so that's out. Another chat with tech support, and they recommend a fake domain name, as it won't create anything. Sure enough, using a domain of djangomysite.com works, and WHM allows me to create a django account. But of course, I can't send email to [email protected] (where I could to [email protected]). What I want, is to be able to create a second account, associated with mysite.com (so I can run cPanel logged in as django, send email to [email protected], etc) - without creating a whole new sub-domain, or fake domain.

  Read the article

• Nvidia GTX 660m crashes games

  - by dcap

  I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

  Read the article

• WPF - How to bind a DataGridTemplateColumn

  - by Andy T

  Hi, I am trying to get the name of the property associated with a particular DataGridColumn, so that I can then do some stuff based on that. This function is called when the user clicks context menu item on the column's header... This is fine for the out-of-the-box ready-rolled column types like DataGridTextColumn, since they are bound, but the problem is that some of my columns are DataGridTemplateColumns, which are not bound. private void GroupByField_Click (object sender, RoutedEventArgs e){ MenuItem mi = (MenuItem)sender; ContextMenu cm = (ContextMenu) mi.Parent; DataGridColumnHeader dgch = (DataGridColumnHeader) cm.PlacementTarget; DataGridBoundColumn dgbc = (DataGridBoundColumn) dgch.Column; Binding binding = (Binding) dgbc.Binding; string BoundPropName = binding.Path.Path; //Do stuff based on bound property name here... } So, take for example my 'Name' column... it's a DataGridTemplateColumn (since it has an image and some other stuff in there). Therefore, it is not actually bound to the 'Name' property... but I would like to be, so that the above code will work. My question is two-part, really: 1) Is it possible to make a DataGridTemplateColumn be BOUND, so that the above code would work? Can I bind it somehow to a property? 2) Or do I need to something entirely different, and change the code above? Thanks in advance! AT

  Read the article

• How do you keep all your languages straight?

  - by Chris Blackwell

  I think I'm going a little crazy. Right now, I'm working with the following languages (I was just doing a mental inventory): C++ - our game engine Assembler - low level debugging and a few co-processor specific routines Lua - our game engine scripting language HLSL - for shaders Python - our build system and utility tools Objective C/C++ - game engine platform code for Mac and iPhone C# - A few tools developed in our overseas office ExtendScript - Photoshop exporting tools ActionScript - UI scripting VBScript - some spreadsheet related stuff PHP - some web related stuff SQL - some web and tool related stuff On top of this are the plethora of API's that often have many different ways of doing the same thing: std library, boost, .NET, wxWidgets, Cocoa, Carbon, native script libraries for Python, Lua, etc, OpenGL, Direct3d, GDI, Aqua, augh! I find myself inadvertently conflating languages and api's, not realizing what I'm doing until I get syntax errors. I feel like I can't possibly keep up with it, and I can't possibly be proficient in all of these areas. Especially outside the realm of C++ and Python, I find myself programming more by looking at manuals that from memory. Do you have a similar problem? Ideas for compartmentalizing so you're more efficient? Deciding where you want to stay proficient? Organizational tips? Good ways to remember when you switch from Lua to C++ you need to start using semi-colons again? Rants on how complicated we programmers have made things for ourselves? Any ideas welcome!

  Read the article

• Java SwingWorker still uses 98% CPU after it's done.

  - by RemiX

  I am new to the Java SwingWorker class, but I'm trying to get it to do some stuff in the background. That part works already, but now, when it is finished, the Windows Task Manager still shows that 70-98% of the CPU is still being used. Before I hit the 'Start' button it is only 3-15% and after I close the program it returns to those values. But what is still happening when the SwingWorker already reported being done?? I'll give you a simplified version of my code: I have this StereoProcessor extending SwingWorker, with doInBackground(): yLoop for(some values y) { for(some values x) { if(isCancelled()) break yLoop; else { setProgress(to some value); // do some non-SingWorker-related stuff } } } return returnValue; I call to this process through another code: stereoProcessor.addPropertyChangeListener(new PropertyChangeListener() { public void propertyChange(PropertyChangeEvent evt) { if(evt.getPropertyName().equals("state")) if(evt.getNewValue().equals(StereoProcessor.StateValue.DONE) { // do stuff } } } }); stereoProcessor.computeSomething(); // this method calls execute() That's about it, so I don't understand what it keeps doing. I tried putting some System.outs in the code in different places, but all stopped printing after a while. Does anyone know what's going on? Edit: I noticed the CPU also keeps running after a simple call to a method in StereoProcessor that doesn't even call execute()...

  Read the article

• Create your own custom browser

  - by ShoX

  Hi, I want to shape my own browser or at least modify a existing one so far that it meets my needs. I want a fast browser (starting and running, not necessarily faster rendering) without any stuff I don't use and simple productive navigation (like Firefox + Vimperator + Tree Style Tab), only much more integrated into each other and a different GUI. I was thinking about just looking into the current two top browsers chrome and firefox (open-source wise) and branch my own smaller version out of it. By just using WebKit or Gecko I will have to implement all the Connection-stuff, too, but I really am not interested in doing that. So my questions are: Does it make sense to start off with a current browser and strip off certain features and the frontend and replace it with my own code? Chrome or Firefox? Which one is less complex? I don't care much about Plugins and Extensions, so they aren't they pretty much even in features otherwise? Thanks for your answers p.s.: It's a just-for-fun at-home project, so please no "just use the browsers..."-stuff...

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >