Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 58/95 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Windows Cannot Boot - 0xc0000225

  - by B__

  I've had Windows 7 installed for months on my Thinkpad T60 laptop and today out of the blue when I tried to boot, it started the Windows loading screen and immediately I got this error: Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. Through some research, I see people get this problem when a repartitioning goes wrong or there's a problem with their dual boot. I'm not dual booting my machine and I haven't messed with my partitions since I installed the OS. This error is truly out of the blue. I've run memory diagnostics from a Windows boot disc and hard drive diagnostics from my BIOS and neither found a problem. I don't have any backups to restore from so I'm hoping to find a fix for this. Anyone seen this kind of thing before? Thanks

  Read the article

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• Windows 7 crashes with STOP 0x101 ("A clock interrupt was not received..") every time the laptop tri

  - by Blorgbeard

  I have an HP Compaq nc8430 with a new install of Windows 7 (32 bit). Every time I sleep the laptop, it crashes. It also crashes sometimes just during normal use. It does hibernate properly. The only reliable trigger I've found to crash it is sleep mode. It's not overclocked, and only standard drivers are installed. It seems to always be the following error: A clock interrupt was not received on a secondary processor within the time interval. And the following STOP code: STOP: 0x00000101 (0x00000061, 0x00000000, 0x80DBF120, 0X00000001) I'm not sure it's always the same parameters exactly, but always seems to be error 101. Given the text of the error message, I've disabled the Dual Core option in BIOS, and this appears to have fixed it - no crashes so far, and it sleeps ok now. However, I'd love a solution that doesn't involve cutting processor performance in half. Any suggestions?

  Read the article

• Why does my motherboard go through an endless reboot cycle when 8 GB of memory is attempted vs 6 GB?

  - by nizm0

  I never got an answer in my googling to this about a year ago and have an extra stick of memory I'd like to be able to use. When is inserted the computer starts, and then reboots immediately in an endless reboot cycle. As soon as the 4th stick is removed, the computer works fine. Right now I have 6 GB of my 8 GB installed. Is there a solution that I am missing to enabling this motherboard to actually boot up with all 8 GB (it supports it). Right now it won't even boot up to BIOS with the 4 sticks... only 3? Memory: 1 x G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory Model F2-8800CL5D-4GBPI - Retail (URL: ) http://www.newegg.com/Product/Product.aspx?Item=N82E16820231194 Motherboard: 1 x GIGABYTE GA-EP45-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail ( URL: )http://www.newegg.com/Product/Product.aspx?Item=N82E16813128359

  Read the article

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• New build won't POST, no video, no beeps

  - by Nate Koppenhaver

  Specs: Motherboard: MSI 760GM-P23 FX Integrated graphics (on MoBo) CPU: AMD Athlon II x4 640 RAM: GeIL Pristine 4GB DDR3 Case/PSU: TOPOWER TP-4107BB-400 Is not POSTing, no video output, no beeps. When RAM is removed, 3 beeps. I have tried removing and replacing the CPU and all the power cables with no change. Resetting the BIOS (by removing and replacing the battery) did nothing as well. Is there something I'm forgetting (1st time building from components), or could one of the components be bad? EDIT: New development: with CPU and RAM installed correctly, it will turn on lights and fans (still no POST) and after running for a minute or so it will turn off and the PSU will make a buzzing noise that ceases only when unplugged.

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Ubuntu 9.1 Install from Disc Stalls After "Install Ubuntu" Sleclection is Made - eMachine

  - by nicorellius

  I am trying to install Ubuntu 9.1 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the choices: Try Ubuntu Install Ubuntu.... etc, etc... I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated.

  Read the article

• Access Western Digital My Book World II RAID array on my Ubuntu Linux

  - by ZeDalaye

  Hi, My WD My Book World II (Blue Rings) NAS has overheated, I think the motherboard is dead. I extracted the disks and plugged them in my desktop PC running Ubuntu Linux. The disks seems to be alive, they are spinning and the BIOS recognize them but Ubuntu is not able to boot as soon as these drives are plugged in. I got an initramfs shell after few minutes telling explaining that the root disk is not available. I suspect that one of my WD drives took the precedence on the system ? Considering that Ubuntu is able to boot and can see my Western Digital disks... is it possible to access the RAID 0 array ? How ? Many thanks for your help, regards, -- Pierre Yager

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Mark Henderson

  I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• CentOS 5.5 APIC issue on ESX 4.1 & ML115

  - by Adnan

  Hi, I've just installed vSphere 4.1 on an HP ProLiant ML115 G5 Quad-core and am trying to install CentOS 5.5 as a guest system. However, when the guest boots up I get a calibrate_APIC_clock warning and a kernel panic message. I've come across this knowledge base article on the vmware website which suggests moving the guest onto another Intel based host (!). Funnily enough I don't have a collection of spare host servers sitting around, so can anyone suggest another solution? Alternatively, would installing an earlier version of CentOS get around this issue, or would a yum update put me back to square one? How about BIOS settings, could anything be tweaked there? Thanks.

  Read the article

• SATA 300 mobo and drives but only connected at SATA 150

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

  Read the article

• Windows 7 64 Bit Can't Get Past Format

  - by Soren

  favorite Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

  Read the article

• Windows could not update the computer's boot configuration.

  - by Luke Puplett

  Hello, I am trying to install Windows Web Server 2008 x64 (have tried 32-bit, too) onto an IBM eServer 326m and am getting the following error message some time after the unpacking files section: Windows could not update the computer's boot configuration. Installation cannot proceed. I can repair the boot information using the Repair option in the WinPE bit of the setup, and it reboots into the Windows installation, so it has good boot data on the drive. Just to complicate things, the server does not have a DVD-ROM so I'm installing from HDD to HDD, both SATA, one an SSD. I've tried each drive in isolation, e.g. removing the SSD and installing from spindle onto itself, same error every time. Flashed IBM BIOS, too. Thanks for your help. Luke

  Read the article

• Windows 7 installation reboot loop

  - by Auswoolf

  Upgrading from Vista home premium to win 7 hoe premium from DVD ex Digital river on gigabyte VM900m; core 2 duo 2.13GHz 2GB ram; Western digital 250GB HD. Got as far as "Expanding Windows files ...100% the error message "Computer encountered unexpected error... To install windows press OK to restart computer and reinstall windows" The computer then reboots, loads Windows 7 (new logo) a essage that says "setup is starting services" then the error message comes back. I can get into BIOS to change boot priority but the computer just ignores this and goes through the same sequence. At the point of "to boot from CD/DVD press any key" my keyboard is deactivated and i cannot make a choice and the sae sequence occurs. I cannot break the sequence - I have push every key, disconnected every external device including HDMI screen, but nothing stops the loop. Any ideas? Auswoolf

  Read the article

• Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

  - by leeand00

  Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

  Read the article

• Sony Vaio CPU fan runs at full speed after installing Windows 8.1 preview

  - by greg27

  I installed the Windows 8.1 preview on my Sony Vaio E Series 14P (http://www.sony.com.au/product/sve14a27cg) and now my CPU fan is running at full speed all the time. When I first start my computer it runs normally, but a few seconds after reaching the Windows login screen the fan speed will suddenly jump up to max. It's pretty loud, so I'm hoping there's a solution! I've tried updating my bios to the latest version but that didn't help. I've tried programs like SpeedFan, but that wasn't able to detect my CPU fan at all. My CPU usage and temperature is normal and doesn't warrant the max fan speed. Someone else has reported the issue here: http://answers.microsoft.com/en-us/windows/forum/windows8_1_pr-hardware/sony-vaio-e-series-sve14a35cxh100-fan-throttle/45ec823a-2bc8-43ea-8557-b1a5dd0a6870 Is there any way to fix this without having to refresh/reinstall Windows?

  Read the article

• Getting USB boot to work in SmartOS on HP ProLiant N40L

  - by user126579

  I recently downloaded SmartOS and tried running it on my HP ProLiant N40L, but it always fails on boot. After dd'ing the image to the USB stick, I plug it into the internal USB header and turn the machine on. After selecting from GRUB, it displays the following: , bss=0x0 It sits there for 2-4 minutes, then finally boots the OS and displays the following: WARNING: Couldn't read ACPI SRAT table from BIOS. lgrp support will be limited to one group. SunOS Release 5.11 Version joyent_20120614T184600Z 64-bit Copyright (c) 2010-2012, Joyent Inc. All rights reserved. WARNING: kvm: no hardware support After that, it hangs. I've tried this with two different USB sticks. I've seen some mentions on the SmartOS website about people running it on an N40L, booting from USB, so maybe it's just broken hardware? Has anyone gotten this working?

  Read the article

• What are good values for PSU voltages?

  - by earlz

  Hello, I have an odd computer I'm trying to fix that will crash only during the setup of an OS(crashes on every OS I've tried so far) It's not overheating and it is stripped down as much as possible and I've tried multiple harddrives, and memtest86+ can run on it for 3 hours without a crash or fail. So, I was a bit stumped and was looking in the BIOS for possible causes and found a hardware monitor that shows PSU voltages. They are: VCORE: 1.432V 3.3V: 3.136V 5V: 5.273 12V: 12.144V I thought the 3.3V looked a little low, but I'm not really sure on how "bad" that is. So, what are the good ranges for the voltages on each CPU rail?

  Read the article

• Windows 7 Can't Get Past Format

  - by Soren

  Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

  Read the article

• Windows Server 2008 repair logonui.exe

  - by Josh R

  I'm fairly certain some data on my server got corrupted and from a dialog box that popped up I think one of the things that got corrupted is logonui.exe I think this because while the server goes through BIOS and the windows loading splash screen, when it finished that it goes to a black screen with just a mouse cursor that I can move around. But most of the services come back up, for example: DNS, DHCP, DFS, and the print service all load up while it's sitting on the black screen. Is there anything I can do to repair the logon screen? Maybe copy a file off another copy of Server 2008, get something off the original media (which I have) or bring the system back to a previous restore point? Thanks! I'm in the weeds right now...

  Read the article

• Why my computer working without harddisc with livecd, but with hardisk not working - computer not response to any signals?

  - by Yosef

  Hi, History of problem: I formated computer (HP Pavalion Desktop). When I restart computer - computer come to first screen before boot and not response to any signals (f2, f10, ESC, etc..) I take out motherboad battery return after time back and power computer - result : as before I disconnect wires of hard-disk and insert livecd UBUNTU to cd and power coputer: result: works without hard-disk. What is the root of problem: hard-disk broken? hard-disk wires not working well? BIOS? other reason How can I fix the problem?(Buy new hard disk etc...) Thanks, Yosef

  Read the article

• Can I rebuild degraded RAID1 on a SAS 5 i controller with a larger mirror drive size?

  - by Kenny

  A drive failed on a Dell SAS 5i controller - see controller bios screengrab: http://imagebin.ca/view/SkZbszA.html The primary is a 160GB 10k sata drive. I added a 250GB 7k rpm drive in the hope that the array would rebuild onto this drive. This did not happen. (assuming that the controller would just operate at the speed of the slowest drive) The controller could see the new drive, but it didn't automatically rebuild the raid1 onto this drive. (my assumption is that it did not do this rebuild as the drive sizes are different). There was an option to add the new drive to the existing raid1 array - but when I tried this a message appeared stating that all data on the array would be lost. (I didn't get a screenshot of this message, I will later) Should the SAS 5i allow me to rebuild the array onto a larger drive? Is the option to add the drive to the array the right way to go? Many thanks!

  Read the article

• SpinRite and USB blues - does a solution exist?

  - by Peter Mortensen

  I use SpinRite to recover hard disks and their content, and to a lesser degree for preventive maintenance. However, if a USB drive (USB thumb drive and/or external hard disk with a USB interface) is connected when SpinRite scans for devices, then SpinRite never finishes/hangs. The work-around is of course to disconnect the drive, but there is value in being able to use SpinRite on USB drives. Some external drives have no screws and it is difficult to take out the hard disk without damaging the casing. And for those that have it would save the disassembling time. Is there a way to fix this problem (e.g. BIOS changes or a modified SpinRite boot CD) without resorting to floppy disks?

  Read the article

• Eee PC - Create USB Recovery Drive w/ Files Copied From Recovery Partition

  - by nedm

  I have an Eee PC 1005HAB whose hard disk has failed. I have no recovery CD/DVD, but I did previously back up the contents of the recovery partition, and would like to use them to create a bootable USB to reinstall the factory settings on the new hard drive. Since I simply copied all the files in the recovery partition, rather than hitting F9 during boot and running through the process to create a recovery disk or drive, how do I now use the files to create a bootable USB drive that will do the recovery? In the BIOS I have disabled boot booster and set external drives to the top of the boot priority, but simply copying all the recovery partion files to a usb doesn't allow it to be booted from. I've downloaded the HP utility for creating bootable USB drives and have tried using it to make the USB drive bootable, but I'm not sure what to do with the ghost image and utilities from the recovery partition to get the process to start properly. Thanks in advance for any help.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >