Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 65/95 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Radeon 4670 Card Has 2 DVI Outs But Only Works When One is used in Win7 x64

  - by ssmith

  I have an ATI XFX Radeon 4670 1GB video card in a Windows 7 Ultimate x64 setup. If I only use one monitor, all is well. If I plug in a second DVI cable to the card, both monitors go dark. I can get one or the other to display, but only when it is the only one plugged into the card. I'm really hoping for a dual-monitor setup here as that was the point of the card. I'm using ATI Radeon HD 4600 Series video drivers dated 11/24/09 (8.681.0.0) which are the latest from their site and are supposed to work with Vista or Win7 x64. When the computer boots with both displays connected, both monitors display the inital bios and boot screens. The Win7 splash screen also displays, but by the time it goes to the login screen, one monitor is offline.

  Read the article

• Getting spurious undo (ctrl-z) sent randomly on a Dell Laptop

  - by squelart

  For the past couple of weeks, my laptop has had a strange problem where it looks like ctrl-z is pressed, so I usually lose bits of text I just typed. If I press ctrl-shit-z (redo), the text comes back, proving it's really as if ctrl-z was pressed. It's difficult to see a pattern, I can be undo-free for hours, then get a few within minutes, sometimes 2-3 undoes at a time. Very frustrating! Running WinXP+SP3 on Dell Latitude D820, Clamwin antivirus. I've tried another keyboard, no difference. Any clue on what this could be, or how I could trace this problem? 2009-09-25: Tried a few things that were listed or linked to on this page: http://www.selfishman.net/2008/06/24/problem-with-dell-inspiron-1501-keypress-every-second/ but nothing helped. Though it seems to point at a Dell laptop issue. I upgraded the BIOS and other drivers, but still got the problem.

  Read the article

• USB port not recognising mouse on first bootup

  - by Pacifika

  On a computer here when first powered on the USB wired mouse is not recognised. The light under the mouse is not lit up. Other usb hub's and keyboards work fine. Disconnecting it and reconnecting it fixes the issue, even after a restart - after the pc is switched off for a length of time (for example overnight) the problem reappears. I swapped the mouse, updated the bios and installed updated intellimouse drivers, turned of power saving on the usb ports. Any ideas?

  Read the article

• dell vostro 1310 with nVidia 8400M display problem

  - by Arthur

  Hi everyone, i hope someone can help me with this problem. I have a Dell vostro 1310 Laptop with 32 bit vista and a 8400M nVidia chip. Recently i have noticed performance issues when my girlfriend was playing Sims 3, and then one day i turned it on and all i got was a thick white line at the bottom of the screen. i heard the OS start up so automatically i thought it was a damaged screen, but i had doubts so i plugged it into an external display via the vga port. it worked but everything appart worm the OS choice menu looks distorted beyond belief. even the bios screen had multicoloured lines running down the screen. The resolution is non existant, the screen only shows a 256 colour pallette and is heavily distorted. i barely managed to get to the device manager where i found the gfx card with an exclamation mark. does anybody have suggestions? should i buy a new mobo or are repairs possible? thanks in advance

  Read the article

• Windows 7 Not Booting After Moving Partition

  - by Guillermo Phillips

  I have a Sony Vaio laptop. After using GParted to move the primary Windows partion, the laptop no longer boots, saying 'Operating system not found'. I don't have a recovery disc and the only other machine I have access to is a Mac Mini. I have tried creating a bootable USB using the recovery ISO from Microsoft. I can see all the files on the USB stick from my Mac. I followed the instructions here: http://borgstrom.ca/2010/10/14/os-x-bootable-usb.html I have set the laptop BIOS boot order to be 'External' first, but the laptop refuses to boot from the USB stick. I have previously been able to boot from a linux installation on the USB stick. Any help or ideas would be appreciated.

  Read the article

• How do you enable multi-core virtualization in Windows 8 Pro?

  - by Greg B

  I've just got a new Dell Vostro 470 with a quad core (8 threads) i7 3770 and I'm trying to run virtual machines on it, which works fine, except if I want to assign multiple cores to a VM. I've checked the bios which states Intel Virtualization Technology [Enabled], but both Hyper-V and VirtualBox will only allow me to assign a single core. If I run the Intel Processor Identification Utility on the host OS it tells me that Intel Virtualization Technology isn't supported by the processor, but according to the Intel website, it is. So whats going on? Have Dell clipped the i7's wings? Is there some config in Windows I need to change?

  Read the article

• Why does DBAN crash on my HDDs?

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• How to set up raid monitoring on a Adaptec AAC-RAID on a Dell?

  - by pjz

  I've got Debian on a Dell with an Adaptec RAID: AAC0: kernel 4.1-0[7417] AAC0: monitor 4.1-0[7417] AAC0: bios 4.1-0[7417] AAC0: serial 4edf09 scsi2 : aacraid Vendor: CERC Model: DATA 1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: CERC Model: Data 2 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 I've got it set up using the fine afacli tool (ick). Is there a way to get it to email me when there's an error? Do I need to hand-roll a script for this? what's the right version of the afacli tool to use? v4.1 gets SIGABRT and exits after I ask it to 'container list' or 'enclosure list' v2.8's enclosure commands don't work either Do I need to upgrade firmware? to what? from where? how?

  Read the article

• Installed 4GB memory but Windows XP 32 bit only reporting 2GB?

  - by AnthonyWJones

  I've just taken an existing XP Pro 32 bit system that had only 0.5GB of memory installed and maxed it out to 4GB. The BIOS reports the 4GB ram however when XP is booted and I look at the computer properties only 2GB of RAM is reported. Can anyone explain this? Before we go up any blind allys the /3GB switch is not the answer here, I have no need for a single process to use more the 2GB of memory. I'm wondering if the the 32 bit XP Pro is deliberately limited to 2GB. I seem to remember seeing an excellent table on a Microsoft site listing all the various SKUs of Windows and what each one was limited to. However I can't seem to find that table now.

  Read the article

• Installed 4GB memory but Windows XP 32 bit only reporting 2GB?

  - by AnthonyWJones

  I've just taken an existing XP Pro 32 bit system that had only 0.5GB of memory installed and maxed it out to 4GB. The BIOS reports the 4GB ram however when XP is booted and I look at the computer properties only 2GB of RAM is reported. Can anyone explain this? Before we go up any blind allys the /3GB switch is not the answer here, I have no need for a single process to use more the 2GB of memory. I'm wondering if the the 32 bit XP Pro is deliberately limited to 2GB. I seem to remember seeing an excellent table on a Microsoft site listing all the various SKUs of Windows and what each one was limited to. However I can't seem to find that table now.

  Read the article

• Is it possible to control my CPU frequency?

  - by Tim

  My laptop's CPU Type is: Mobile AMD Turion 64 ML-30, 1600 MHz (8 x 200) I was wondering how to find out if its CPU frequency is controllable? What softwares or other ways can control my CPU frequency? My OSes are Windows XP and Ubuntu. Can I control CPU frequency so that the CPU temperature can be controlled not to exceed some temperature? Thanks and regards! More information: My laptop is Acer Aspire 5000. Its motherboard is reported by Speccy as: Manufacturer: Acer, Inc. Model: Lugano M Version: Not Applicable Chipset Vendor: SiS Chipset Model: 760GX Chipset Revision: 03 Southbridge Vendor: SiS Southbridge Model: LPC Bridge Southbridge Revision: 25 BIOS Brand: Acer Version: 3A19 Date: 05/17/05

  Read the article

• How to get Hyper-V to recognize that a VM isn't stopping, it's stopped.

  - by Matt Burke

  I have a Hyper-V virtual machine that has some problems. First, its settings are apparently corrupt: The WMI object contained an invalid value in property BIOSNumLock. The WMI object contained an invalid value in property AutomaticStartupAction. Second, I saw something that implied that I could toggle the NumLock checkbox on the BIOS property page to fix the first problem, but the checkbox didn't show up. So I connected to the VM and shut it down. Now (many hours later) Hyper-V claims that the VM is "Stopping". However, when I follow the interweb's directions on forcing a VM offline (i.e. find vmwp and kill it), I can't find vmwp. The VM's WMI object has a PID that doesn't exist, and none of the vmwp processes have this machine's GUID. So, how do I trick Hyper-V into seeing that the machine is offline (or letting me delete it)?

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• Trying to get a PC to boot off a bootable SD card that is inside an USB attached Android device.

  - by Cyril

  First, I'd like to make myself look less a madman than I may have appeared to be. I wanted to have a bootable USB stick with me at all times, but it's less convenient because it's an extra object and it's easier to lose, forget etc. Then I thought, I have an Android phone, and it has a micro SD in it; perfect. Not all PC's can boot off a card reader, but the phone itself is a card reader when attached as a disk drive. Or at least so I thought. Turns out that my netbook BIOS (tested on Asus eeePC) refuses to see it as an external harddrive; it only recognizes it as a generic USB device and doesn't offer an option to boot from it. The device has a name "Android phone" or smth, so it seems to me that it doesn't work as a "pure" card reader, and instead still manifests itself as a phone. Can it be somehow overridden?

  Read the article

• Disk boot failure in Windows 7 64-bit after installing the latest NVIDIA drivers

  - by Domchi

  I successfully installed the newest NVIDIA drivers (275.33) in Windows 7 64-bit and rebooted afterwards just in case. After the reboot, I got an error about missing MBR. I disconnected the slave disk so that Windows doesn't get confused and got this message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER It seems that Windows doesn't recognize the main disk anymore. I booted from Windows install disk but the main disk doesn't get listed as possible Windows locations to repair, and I can't get to it from the recovery prompt. The BIOS does recognize it, and I'm able to see it if I run diskpart - however "detail disk" in diskpart says that there are no volumes on the disk. I also tried bootrec /FixMbr without effect, and bootrec /FixBoot which gives the error message: Element not found. What else can I do? Why would diskpart say there are no volumes on the disk?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• How to find out if the screen is WLED or RGBLED on Dell Studio XPS 16?

  - by Abhijeet

  I just ordered the Dell Studio XPS 16 with i7 and 16" RGBLED screen. This upgrade from WLED LCD to RGBLED LCD charged me more $$. But now when I view the order online, it lists this part as "320-8335 Premium FHD WLED Display, Obsidian Black, 2.0 MP Webcam". When called Dell, the rep says this part is RGBLED screen and the "premium" is for RGBLED. I want to make sure they are shipping me the RGBLED screen and not the WLED. Is there any way to verify this after I receive (either from Device Manager or BIOS or somewhere in system settings)? Also, is there any published specifications / criteria that we can run (some third party software) on this monitor which can tell if this is WLED or RGBLED?

  Read the article

• After enabling raid0, blue screen of death

  - by thegreyspot

  Hi! Im trying to get a raid0 setup going. I have a 750 gb hdd with the OS on it and two 80gb HDD. For right now, I just want to raid0 on the two 80Gb hdd. When I enable raid in my Bios, Win7 has a BSOD during boot. As far as I understand I need to install raid drivers. However how can I do this? The win7 DVD doesnt seem to have a driver install option. Any suggestions? Thanks EDIT: I saw that there was as seperate setting for the 4th and 5th sata ports. So I pluged in my OS drive into there and left it on IDE. Still didnt work though, am I miss understanding that idealogy?

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• SATA drive not recognized when installing RHEL 5.1 on PowerEdge R410

  - by Rachel

  Here's my setup: Dell R410 with Perc S100 (software) raid controller on an Intel ICH10R chipset The first problem is that the Perc S100 is only supported on windows. I'm trying to install RHEL 5.1. It boots from the cdrom, but later the installer can't see the cdrom or hard drive. Both are connected to the on-board sata controller. The only options in the R410 bios for SATA are ATA or RAID. I don't need raid, I just want a single drive setup.

  Read the article

• Deleted the GPT partition/ record

  - by Manish Kumar Singh

  A friend of mine had GPT partition n his Lenovo laptop. While formatting the computer and reinstalling the OS, I wiped of all the partitions, and created 4 new partitions. Now after installing everything, when I turned off the laptop. It isn't booting, I checked the BIOS settings, and tried booting Ubuntu off my life disc, it ran well, but again, I can't boot anymore. Later I figured out, that this is happening because I had deleted the GPT partition, and now the OS has tried to create MBR records, so basically this is the problem.

  Read the article

• Reinstalling a fresh Windows 8 on my new laptop

  - by AlexV

  OK I have a new Dell (Inspiron 15R 5520) laptop that came with Windows 8 pre-installed. I'm really not a fan of pre-installed Windows since they are bundled with tons of softwares I don't want and settings I don't like. I would like to reinstall it myself with a fresh installation. I have bought Windows 8 Pro OEM already for my desktop computer and it came with the usual OEM sticker with the Windows serial on it. Now my new laptop only have a Windows 8 logo sticker on it with no serial on it. After some research it seems it's normal. Now, can I format my laptop and install Windows 8 (not pro) from my Windows 8 Pro OEM DVD? I ask because when I installed Windows 8 Pro it asked for the serial (which was found on the sticker). I'm wondering if the same DVD will detect the serial on the BIOS of my new laptop or I need a special Dell DVD for that?

  Read the article

• UEFI - Linux Mint Boot from USB Doesn't work

  - by Joe Bennett

  I'm running Linux Mint (only OS other than in VirtualBox) and wanting to remove it. I've created a Live USB of Windows 8 using Windows 7 USB/DVD Download Tool - Yes, I know it says Windows 7 but I've been doing research and I am hearing from everywhere that it also works for Windows 8. The ISO was loaded on just fine (AFAIK) Computer came with Windows 8 pre-installed I have Safe boot and Fast boot disabled in the BIOS Settings I have USB as my first boot option I have tried both the USB 2.0 and 3.0 ports Yet, Mint is all that will boot up. Anybody have a similar issue? If it helps, the computer is a Toshiba Satellite S855D Laptop with an AMD APU quad-core processor (3 CPU, 1 GPU)

  Read the article

• ASUS EAH5770 CuCore problem: VLC Stutting!

  - by aiacet

  Hello to everyone and thank you in advance to all the people that will want help me. Like in the title my problem concernig this boring stutting when i play a Tv series episodes or a film on VLC whit my mew PC. Pc components are: AMD Phenom II X4 955 Black Box 125W Asus M4A785TD-M EVO Radeon HD5770 1GB GDDR5 Asus CoolerMaster GX 650W G.Skill 2x2GB PC3-12800 1600Mhz-787 4GBECO Western Digital 1TB SATAII 64MB Monitor are SyncMaster 920Nw OS: Windows XP 32 bit Display adapter drivers are updates at the latest release (catalyst 10.4) and also the ATi Vga bios are updated Besides when i play the same episode with DivX Plus Player i have video and audio stutting. I can play very well Dragon Age Origin and other games but i'm unable to see a beutyfull movie. Please help me

  Read the article

• Need help. HDD Failed

  - by jiewmeng

  i have a seagate 3.5" 500GB SATA2 HDD that i put in a USB case (vantec) that failed recently. symptoms: at first, it started except that attempts made to browse certain folders resulted in "Data Error (Cyclic Redundancy Check)". then when i tried restarting the hdd, then i got a RAW partition, and windows 7 said i need to format it. i also tried using a desktop to connect to the HDD directly using SATA, windows 7 stuck at "starting windows" for abt half hour b4 i gave up on it. in the BIOS, it seems to detect the HDD model correctly, something like STA3500xxx something like that i also tried using TestDisk as suggested by jaclaz on MSFN and it did not find any partitions what could i do now?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >