Search Results

Search found 6357 results on 255 pages for 'generic relations'.

Page 58/255 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• How do you fix "failed command: IDENTIFY DEVICE" showing up in dmesg?

  - by Neil

  I just got a new Mushkin 60gb SSD, and it's now my primary drive in the ata1 spot. I've been getting these failed command: IDENTIFY DEVICE errors which are preventing rebooting and shutdown. Does anyone know what these could be caused by, or how to start troubleshooting? I've tried these kernels: 2.6.32-22-generic 2.6.31-17-generic And they both have the same error. Here is a link to my entire dmesg. And the relevant ata1.00 parts below: [ 59.804237] ata1: drained 256 bytes to clear DRQ. [ 59.804244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 59.804249] ata1.00: failed command: IDENTIFY DEVICE [ 59.804254] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in [ 59.804256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.804258] ata1.00: status: { DRDY } [ 59.804264] ata1: hard resetting link [ 59.804266] ata1: nv: skipping hardreset on occupied port [ 60.272036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.352193] ata1.00: configured for UDMA/133 [ 60.352204] ata1: EH complete

  Read the article

• Android - Calling getJSONArray throwing JSONException with no stack trace

  - by Agathron

  Hi all, I'm currently working on an android app that pulls a list of forums from a JSON feed. I'm trying to parse the feed and immediately upon calling getJSONArray a JSON exception is being thrown with no stack trace. The JSON being returned is stored in an JSONObject jobj with the format as follows: { "Forum": [ {"ForumName":"CEC Employee Communications Forum","ForumId":"105"}, {"ForumName":"CEC External Stakeholder Relations Forum","ForumId":"109"}, {"ForumName":"See All...","ForumId":"0"} ] } However when running the following code, I get an immediate exception without a stack trace: JSONArray jarray = new JSONArray(); jarray = jobj.getJSONArray("Forum"); Running jobj.GetJSONArray("Forum").toString(); returns what looks to be a correct array of the format: [ {"ForumName":"CEC Employee Communications Forum","ForumId":"105"}, {"ForumName":"CEC External Stakeholder Relations Forum","ForumId":"109"}, {"ForumName":"See All...","ForumId":"0"} ] I also tried JSONArray jarray = new JSONArray(jobj.GetJSONArray("Forum").toString()); and had the exception thrown immediately. Any help would be greatly appreciated. Thanks!

  Read the article

• Yet another blog about IValueConverter

  - by codingbloke

  After my previous blog on a Generic Boolean Value Converter I thought I might as well blog up another IValueConverter implementation that I use. The Generic Boolean Value Converter effectively converters an input which only has two possible values to one of two corresponding objects.  The next logical step would be to create a similar converter that can take an input which has multiple (but finite and discrete) values to one of multiple corresponding objects.  To put it more simply a Generic Enum Value Converter. Now we already have a tool that can help us in this area, the ResourceDictionary.  A simple IValueConverter implementation around it would create a StringToObjectConverter like so:- StringToObjectConverter using System; using System.Windows; using System.Windows.Data; using System.Linq; using System.Windows.Markup; namespace SilverlightApplication1 {     [ContentProperty("Items")]     public class StringToObjectConverter : IValueConverter     {         public ResourceDictionary Items { get; set; }         public string DefaultKey { get; set; }                  public StringToObjectConverter()         {             DefaultKey = "__default__";         }         public virtual object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             if (value != null && Items.Contains(value.ToString()))                 return Items[value.ToString()];             else                 return Items[DefaultKey];         }         public virtual object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             return Items.FirstOrDefault(kvp => value.Equals(kvp.Value)).Key;         }     } } There are some things to note here.  The bulk of managing the relationship between an object instance and the related string key is handled by the Items property being an ResourceDictionary.  Also there is a catch all “__default__” key value which allows for only a subset of the possible input values to mapped to an object with the rest falling through to the default. We can then set one of these up in Xaml:-             <local:StringToObjectConverter x:Key="StatusToBrush">                 <ResourceDictionary>                     <SolidColorBrush Color="Red" x:Key="Overdue" />                     <SolidColorBrush Color="Orange" x:Key="Urgent" />                     <SolidColorBrush Color="Silver" x:Key="__default__" />                 </ResourceDictionary>             </local:StringToObjectConverter> You could well imagine that in the model being bound these key names would actually be members of an enum.  This still works due to the use of ToString in the Convert method.  Hence the only requirement for the incoming object is that it has a ToString implementation which generates a sensible string instead of simply the type name. I can’t imagine right now a scenario where this converter would be used in a TwoWay binding but there is no reason why it can’t.  I prefer to avoid leaving the ConvertBack throwing an exception if that can be be avoided.  Hence it just enumerates the KeyValuePair entries to find a value that matches and returns the key its mapped to. Ah but now my sense of balance is assaulted again.  Whilst StringToObjectConverter is quite happy to accept an enum type via the Convert method it returns a string from the ConvertBack method not the original input enum type that arrived in the Convert.  Now I could address this by complicating the ConvertBack method and examining the targetType parameter etc.  However I prefer to a different approach, deriving a new EnumToObjectConverter class instead. EnumToObjectConverter using System; namespace SilverlightApplication1 {     public class EnumToObjectConverter : StringToObjectConverter     {         public override object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             string key = Enum.GetName(value.GetType(), value);             return base.Convert(key, targetType, parameter, culture);         }         public override object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             string key = (string)base.ConvertBack(value, typeof(String), parameter, culture);             return Enum.Parse(targetType, key, false);         }     } }   This is a more belts and braces solution with specific use of Enum.GetName and Enum.Parse.  Whilst its more explicit in that the a developer has to  choose to use it, it is only really necessary when using TwoWay binding, in OneWay binding the base StringToObjectConverter would serve just as well. The observant might note that there is actually no “Generic” aspect to this solution in the end.  The use of a ResourceDictionary eliminates the need for that.

  Read the article

• Negative downtime, 200% uptime reported by uprecords/uptimed

  - by Psychoholic

  I'm curious as to how I could have negative downtime that keeps increasing, as well as uptime beyond 100%. I'm getting the below output from uprecords -adM: # Uptime | System Boot up ----------------------------+--------------------------------------------------- -> 1 14 days, 21:12:15 | Linux 3.2.0-29-generic Tue Aug 21 21:02:27 2012 2 14 days, 15:31:05 | Linux 3.2.0-29-generic Tue Aug 21 21:03:33 2012 ----------------------------+--------------------------------------------------- NewRec 0 days, 05:41:09 | since Wed Sep 5 12:33:32 2012 mst in 10 days, 02:40:18 | twenty-five days Sat Sep 15 21:02:26 2012 up 29 days, 12:43:20 | since Tue Aug 21 21:02:27 2012 down -14 days, -21:-11: | since Tue Aug 21 21:02:27 2012 %up 201.607 | since Tue Aug 21 21:02:27 2012 I installed uptimed sometime in the last week, have not rebooted, and just yesterday did I notice this odd behavior. I'm running Ubuntu 12.04.1, hosted in Hyper-V on Windows Server 2008 R2 64bit. Any insight would be appreciated.

  Read the article

• Chainload boot of Ubuntu installed on 32GB SD card from legacy Grub boot on USB

  - by Gary Darsey

  I have Ubuntu installed on a 32 GB SD card (in the Storage Expansion slot on an Acer Aspire One) with Grub2 installed in the same partition. I boot into legacy Grub on a USB drive and would like to boot by chainloading Grub2 from Grub (kernel/initrd or symlink booting would also be fine), but I haven't figured out how to do this from legacy Grub CLI. Output from blkid for this partition is /dev/mmcblk0p1: LABEL="Ubuntu" UUID="7ceb9fa7-238c-4c5d-bb8e-2c655652ddec" TYPE='ext4" / fdisk -lu information Boot indicator ID 83. Related entries in grub.cfg: search --no-floppy --fs-uuid --set-root 7ceb9fa7-238c-4c5d-bb8e-2c655652ddec linux /boot/vmlinuz-3.5.0-17-generic root=UUID=7ceb9fa7-238c-4c5d-bb8e-2c655652ddec... initrd /boot/initrd.img-3.5.0-17-generic I can't seem to replicate this in legacy Grub. Is there any way get Grub2 to chainload? How do I set root with UUID in legacy Grub? I prefer to boot from USB. Would Grub2 on USB (copying the grub.cfg generated during installation) be an option?

  Read the article

• Lubuntu 12.04 PPC slow startup and shutdown

  - by Carlo Bertuccini

  I've installed Lubuntu 12.04 on a Powerbook G4 (PowerPC 1GHz, 1 gb ram, Geforce MX 440). Everything works perfectly except the startup and shutdown. To startup my system I have to wait about 3 minutes (and similar time to shutdown) Giving a look @ /var/log/dmesg I noticed the following [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x017900a5) checking generic (b8004000 151800) vs hw (b8000000 80000000) fb: conflicting fb hw usage nouveaufb vs 0Ffb NVDA,Displ - removing generic driver The only issue concerns Nouveau ... inside my /var/log/kern.log says what follows BUG: soft lockup - CPU#0 stuck for 22s! I've booted passing the "nouveau.modeset=0" parameter and the system boot in 15 seconds but with 4 bit graphics -- Any idea how to fix? Thanks in advance for any help

  Read the article

• Turn off keyboard back-light Sony (VAIO SVF1521DCXW)

  - by KasiyA

  I have a Sony laptop and I want to turn keyboard back-light off. It doesn't have a shortcut function key for doing this on the keyboard . I can turn off it with VAIO Control Center in Windows but I don't know how can I turn it off in Ubuntu 14.04. There isn't available to me: /sys/devices/platform/sony-laptop/kbd_backlight doesn't exist on my machine. I have this folder /sys/devices/platform/sony-laptop/ and there is three folder one power folder and two shortcut-ed folder driver , subsystem and five file contains battery_care_health , battery_care_limiter , modalias , touchpad and event This is the output of running sudo modinfo sony-laptop: filename: /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko version: 0.6 license: GPL description: Sony laptop extras driver (SPIC and SNC ACPI device) author: Stelian Pop, Mattia Dongili srcversion: 5C6E050349475558A231C59 alias: acpi*:SNY6001:* alias: acpi*:SNY5001:* depends: intree: Y vermagic: 3.13.0-34-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 50:0B:C5:C8:7D:4B:11:5C:F3:C1:50:4F:7A:92:E2:33:C6:14:3D:58 sig_hashalgo: sha512 parm: debug:set this to 1 (and RTFM) if you want to help the development of this driver (int) parm: no_spic:set this if you don't want to enable the SPIC device (int) parm: compat:set this if you want to enable backward compatibility mode (int) parm: mask:set this to the mask of event you want to enable (see doc) (ulong) parm: camera:set this to 1 to enable Motion Eye camera controls (only use it if you have a C1VE or C1VN model) (int) parm: minor:minor number of the misc device for the SPIC compatibility code, default is -1 (automatic) (int) parm: kbd_backlight:set this to 0 to disable keyboard backlight, 1 to enable it (default: no change from current value) (int) parm: kbd_backlight_timeout:meaningful values vary from 0 to 3 and their meaning depends on the model (default: no change from current value) (int) With the suggested command: sudo modprobe -r sony_laptop sudo modprobe -v sony_laptop kbd_backlight=0 Output was: insmod /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko kbd_backlight=0 It doesn't seem to affect the keyboard backlight. And also trying this command: sudo modprobe -v sony_laptop kbd_backlight_timeout=3 kbd_backlight=0 and doesn't seem to effect the keyboard backlight I also test it after restart laptop, And I didn't see any effect too. Important : By default, keyboard backlight is off; when I press a key it turns on and after 15 seconds it turns off again. It's the same result on battery and AC power I followed also http://ubuntuforums.org/showthread.php?t=2139597 and Keyboard backlighting not working on a Vaio VPCSB11FX but didn't work so.

  Read the article

• VMWare-Tools Installation fails

  - by Ajay

  I am trying to install VMwareTools-8.4.6-385536.tar.gz (VMWare Tools) on the following operating system: Ubuntu 11.04 Linux ubuntu 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux I am using VMPlayer version 3.1.4 - build 385536 After starting the installation I am getting the following errors: What is the directory that contains the init scripts? [/etc/init.d] Error opening No such file or directory Distribution provided drivers for Xorg X server are used. Skipping X configuration because X drivers are not included. Creating a new initrd boot image for the kernel.<br> update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Blocking file system: done Guest operating system daemon: failed Virtual Printing daemon: done Unable to start services for VMware Tools Can somebody help in this?

  Read the article

• Why does my Grub have two entries for Windows?

  - by Tomas Lycken

  I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

  Read the article

• Ubuntu server spontaneous reboot

  - by user1941407

  I have got two ubuntu 12.04 servers(xeon e3). Sometimes(several days) each server spontaneously reboots. HDDs and other hardware are ok. Which logfile can help find a reason of the problem? UPDATED. hardware: xeon e3 processor, intel server motherboard, 32gb ddr3 ecc, mdadm mirror hdd raid for system, mdadm ssd raid for database(postgres). Both servers have similar (not identical) components. Smart is OK. It seems that the problem is in the software. Python process and database are running on this servers. Syslog (time of reboot): Aug 23 13:42:23 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:42:23 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:43:24 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:43:24 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:44:14 xeon sensord: Chip: acpitz-virtual-0 Aug 23 13:44:14 xeon sensord: Adapter: Virtual device Aug 23 13:44:14 xeon sensord: temp1: 27.8 C Aug 23 13:44:14 xeon sensord: temp2: 29.8 C Aug 23 13:44:14 xeon sensord: Chip: coretemp-isa-0000 Aug 23 13:44:14 xeon sensord: Adapter: ISA adapter Aug 23 13:44:14 xeon sensord: Physical id 0: 37.0 C Aug 23 13:44:14 xeon sensord: Core 0: 37.0 C Aug 23 13:44:14 xeon sensord: Core 1: 37.0 C Aug 23 13:44:14 xeon sensord: Core 2: 37.0 C Aug 23 13:44:14 xeon sensord: Core 3: 37.0 C Aug 23 13:44:24 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:44:24 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:47:01 xeon kernel: imklog 5.8.6, log source = /proc/kmsg started. Aug 23 13:47:01 xeon rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="582" x-info="http://www.rsyslog.com"] start Aug 23 13:47:01 xeon rsyslogd: rsyslogd's groupid changed to 103 Aug 23 13:47:01 xeon rsyslogd: rsyslogd's userid changed to 101 Aug 23 13:47:00 xeon rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpuacct Aug 23 13:47:01 xeon kernel: [ 0.000000] Linux version 3.11.0-26-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #45~precise1-Ubuntu SMP Tue Jul 15 04:02:35 UTC 2014 (Ubuntu 3.11.0-26.45~precise1-generic 3.11.10.12) Aug 23 13:47:01 xeon kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-26-generic root=UUID=0daa7f53-6c74-47d2-873e-ebd339cd39b0 ro splash quiet vt.handoff=7 Aug 23 13:47:01 xeon kernel: [ 0.000000] KERNEL supported cpus: Aug 23 13:47:01 xeon kernel: [ 0.000000] Intel GenuineIntel Aug 23 13:47:01 xeon kernel: [ 0.000000] AMD AuthenticAMD Aug 23 13:47:01 xeon kernel: [ 0.000000] Centaur CentaurHauls Aug 23 13:47:01 xeon kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Aug 23 13:47:01 xeon kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable Aug 23 13:47:01 xeon kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved Dmseg - nothing strange.

  Read the article

• Architecting multi-model multi-DB ASP.NET MVC solution

  - by A. Murray

  I have an ASP.NET MVC 4 solution that I'm putting together, leveraging IoC and the repository pattern using Entity Framework 5. I have a new requirement to be able to pull data from a second database (from another internal application) which I don't have control over. There is no API available unfortunately for the second application and the general pattern at my place of work is to go direct to the database. I want to maintain a consistent approach to modeling the domain and use entity framework to pull the data out, so thus far I have used Entity Framework's database first approach to generate a domain model and database context over the top of this. However, I've become a little stuck on how to include the second domain model in the application. I have a generic repository which I've now moved out to a common DataAccess project, but short of creating two distinct wrappers for the generic repository (so each can identify with a specific database context), I'm struggling to see how I can elegantly include multiple models?

  Read the article

• Ubuntu apt-get install linux-image

  - by Karl Kloppenborg

  I'd like someone to enlighten me as to what exactly goes on with aptitude when I want a kernel. As we all know, there's pretty much the following kernel option: linux-image-generic linux-image-server linux-image-virtual This morning I did an install and it had linux-image-generic on it, so I ran the following: apt-get -y remove linux-image-* This removed all my kernels as expected, I followed suit with running: apt-get install linux-image-virtual Says I've installed linux-image-server!? Am I missing something here, because I checked twice and it did it twice, however if I manually select a kernel (in my instance I used: linux-image-2.6.35-30-virtual) it will install linux-image-virtual. This seems rather strange to me? Details: Running Ubuntu 9.10 Am I missing something? :)

  Read the article

• UI Design Help / Advice

  - by Greg Andora

  Hey everyone, I have a dillema where our client relations department has been brought in for advice on UI and I vehemently disagree with it...even though I don't consider myself a designer at all. While I have been vocal about my disagreement about it, I've been asked to point to design standards to prove that what I'm saying is correct and that the guys in Client Relations are flat out wrong. A mockup is below, I'm trying to argue that the icons of the airplane, boat, and couch (ya, I didn't choose those either) belong in the header of the page (same area as the logo) and not in the content area of the page. Can anybody please help me by pointing me to something that helps prove my point? Thanks a lot, Greg Andora

  Read the article

• Upgrading from raring to saucy broke many of my fonts in certain applications

  - by valadil

  I upgraded from raring to saucy over the weekend. Two of my applications, dzen2 and xmobar, won't display the fonts they used to. I'd mostly been using fixed and 6x12. xmobar doesn't run with these fonts. dzen2 shows some generic font I can't identify. I can change the size but not the font. The only exception is terminus. I looped over xlsfonts and piped them into a dzen2 to see what still worked. Variants of terminus were fine. Everything else used the same generic looking font face. No idea why. I haven't found any other applications with font issues since the update, but I haven't tried too hard to look either.

  Read the article

• Problems with brother printer drivers on 64bit 12.04

  - by Jeff Klein

  I'm running 12.04 64bit on a toshiba satellite laptop. I have a Brotrher MFC-J825dw printer. I've installed brothers driver for it and the cupswrapper but it won't print. I says it is receiving data but it never shows up in the queue. I've also tried the text only generic driver and the same thing happens. I think some dependencies are missing for the cups wrapper and when I try to find it it says it can't be installed. Nopt sure if that's the problem because it doesn't explain the generic driver failure. In any case, any ideas?

  Read the article

• Supertuxkart not able to start

  - by subeh.sharma

  Was working fine before i played around with NVIDIA drivers and ended up with this problem. I tried running it through the terminal and i see these messages: subsharm@subsharm-ThinkPad-T61:~$ supertuxkart Irrlicht Engine version 1.7.2 Linux 3.0.0-15-generic #25-Ubuntu SMP Mon Jan 2 17:44:42 UTC 2012 x86_64 [FileManager] Data files will be fetched from: '/usr/share/games/supertuxkart/' [IrrDriver] Creating NULL device Irrlicht Engine version 1.7.2 Linux 3.0.0-15-generic #25-Ubuntu SMP Mon Jan 2 17:44:42 UTC 2012 x86_64 [IrrDriver] Trying OpenGL rendering. [IrrDriver] Tring to create device with 32 bits Xlib: extension "GLX" missing on display ":0.0". [IrrDriver Temp Logger] Level 1: No GLX support available. OpenGL driver will not work. [IrrDriver Temp Logger] Level 2: Fatal error, could not get visual. Segmentation fault subsharm@subsharm-ThinkPad-T61:~$ sudo Xorg -configure [sudo] password for subsharm: Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.

  Read the article

• Wireless not working on Dell XPS 17 after installing 12.04

  - by user60622

  I (linux newbie) have a Dell XPS 17 and tried to install Ubuntu 12.04. After installation all WLAN accesspoints near are detected. But I can not connect (but I am able to connect with other computers as well as with Dell XPS 17 under windows). Outputs: iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:"LerchenPoint" Mode:Managed Frequency:2.412 GHz Access Point: 58:6D:8F:A0:2D:58 Bit Rate=1 Mb/s Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-37 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:19 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:99:98:28 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-24-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:50 memory:f0400000-f0401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:0a:00.0 logical name: eth0 version: 06 serial: f0:4d:a2:56:e3:94 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.123 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:47 ioport:6000(size=256) memory:f0a04000-f0a04fff memory:f0a00000-f0a03fff dmesg | grep iwl [ 10.157531] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.157561] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 10.157598] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 10.157599] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 10.157601] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 10.157731] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 10.157834] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 10.157976] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 10.179772] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 10.179775] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 10.179777] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 10.179796] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 10.574728] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 10.726409] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.714132] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 19.777862] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2251.603089] iwlwifi 0000:04:00.0: PCI INT A disabled [ 2266.578350] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2266.578399] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 2266.578435] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 2266.578437] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 2266.578439] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 2266.578704] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 2266.578808] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 2266.578916] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.600709] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 2266.600712] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 2266.600713] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 2266.600727] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 2266.605978] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 2266.606331] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2266.614179] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.681541] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S Solutions I tried: rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. rmmod /lib/modules/3.2.0-24-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/wireless/cfg80211.ko sudo modprobe iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. replacing iwlwifi-1000-5.ucode (current driver) against iwlwifi-1000-3.ucode sudo jockey-gtk: (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed nothing is listet in "Additional drivers" (german: "Zusätzliche Treiber"). gksudo gedit /etc/modprobe.d/blacklist.conf add "blacklist acer_wmi" Any help would be appreciated very much. Thanks!!

  Read the article

• Can't mount cds after failed Brasero burn

  - by Allan

  Brasero failed to burn a disk recently, and now I can't access CD-ROMS. Even CD-Rs are not not showing. Using Ubuntu 11.10 on a Dell D510 Lattitude laptop. allan@allan-Latitude-D510:~$ cdrecord -checkdrive Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/cdrw Using /dev/cdrom of unknown capabilities Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identification : 'DVD+-RW TS-L532B' Revision : 'DE04' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R My CD drive is now useless, and any help on getting it to read/burn would be appreciated.

  Read the article

• Ubuntu cannot boot after kernel upgrade

  - by andrey

  Today I have upgraded the Linux kernel (using the Update Manager), from 3.0.0.16-generic to 3.0.0.17-generic. However, after this update, Ubuntu 11.10 cannot boot anymore. I see a strange message which says "initclt: event failed". And if I press [Ctrl]+[Alt]+[F1] it still allows me to log into the text mode. But if I type sudo lightdm, I cannot log into the graphical mode. However, if I choose to boot an older kernel from the GRUB, Ubuntu boots correctly. What should I do, in order to be able to boot the system using the new kernel?

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• Bluetooth firmware problem in Ubuntu 13.04

  - by chanzerre

  I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

  Read the article

• Conditional relation

  - by Lowgain

  I've got a model like this: Stem -id -etc And then I have Stemrelation -stem_id -related_stem_id -active I can get the related stems with the following relations class Stem < ActiveRecord::Base has_many :stemrelations has_many :related_stems, :through => :stemrelations end class Stemrelation < ActiveRecord::Base belongs_to :stem belongs_to :related_stem, :class_name => "Stem", :foreign_key => "related_stem_id" end But now I'd only like to get the active relations. I tried adding this to the Stem model: has_many :active_related, :through => :stemrelations, :source => :related_stem, :conditions => {:active => true} but this gives me an error becasue it tries to check the active flag on the stem model instead of the stemrelation. What do I change here? Thanks!

  Read the article

• Wacom board not detected

  - by Christer

  Board is not detected by the system settings, ubuntu 11.10 uname -r 3.0.0-13-generic-pae Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 003 Device 003: ID 056a:00df Wacom Co., Ltd Bus 002 Device 004: ID 03f0:0601 Hewlett-Packard ScanJet 6300c Bus 002 Device 005: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port Bus 002 Device 006: ID 0409:0056 NEC Corp. lsmod | grep wacom try to autogen driver input-wacom-0.11.1 from git, but fails with configure: WARNING: kernel version 3.0.0-13-generic-pae not supported Anyone have a solution ?

  Read the article

• Deserialize inherited classes into the same list in XNA

  - by M0rgenstern

  I am writing a Gui for a game (for what else ...). Therefor I wrote a class GuiElement which has some serializeable fields. From this class I deflect a Class "Button" which has one serializeable field more. Furthermore, I have a Class GuiWindow, which is as well deflected from "GuiElement". An Object of this Class has a Field "HandledElements" of the type "List". To know the layout of the Menues, I use XML-Files, which look like that (for example): <?xml version="1.0" encoding="utf-8" ?> <XnaContent xmlns:Generic="System.Collections.Generic"> <Asset Type="System.Collections.Generic.List[GUI.GuiWindow]"> <Item> <Position>0 0</Position> <AlternativeImagePath></AlternativeImagePath> <IsActive>true</IsActive> <Name>MainMenu</Name> <HandledElements> <Item> <Position>100 100</Position> <AlternativeImagePath></AlternativeImagePath> <IsActive>true</IsActive> <Name>Optionen</Name> <Caption>Optionen</Caption> </Item> </HandledElements> </Item> <Item> <Position>0 0</Position> <AlternativeImagePath></AlternativeImagePath> <IsActive>false</IsActive> <Name>Options</Name> <HandledElements> </HandledElements> </Item> </Asset> </XnaContent> As you can see, the first window has in its "HandledElements" List an Item with the Field . This is a field which only a Button has. The Problem is now: I can't deserialize this XML file, because GuiElement does not have this Field, it only has the few fields above. I thought it would know automatically which Class to use,but it doesn't. Do I really have to give my windows a list for each child class of GuiElement? Or can I do another workaround?

  Read the article

• Entities groups in transactions

  - by Joel

  In the context of "Keys and Entity Groups" article by google: http://code.google.com/appengine/docs/python/datastore/transactions.html 1) "Only use entity groups when they are needed for transactions" 2) "Every entity belongs to an entity group, a set of one or more entities that can be manipulated in a single transaction." It seems like entity groups exist only for the use of transactions, i.e. making one transaction possible between all entities in a group. My question is then why are there parent-child relations between entities and not just a simple declaration of entities to be in a single group (that is defining A,B,C to be in the same group as opposed to defining relations between them "A (parent of) B, B (parent of C)"). What is the benefit from using parent-child relation model when the only purpose is for entities to be in the same group to make transaction possible? Thanks Joel

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >