Search Results

Search found 2539 results on 102 pages for 'karthi 27'.

Page 58/102 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Creating a frozen bubble clone

    - by Vaughan Hilts
    This photo illustrates the environment: http://i.imgur.com/V4wbp.png I'll shoot the cannon, it'll bounce off the wall and it's SUPPOSED to stick to the bubble. It does at pretty much every other angle. The problem is always reproduced here, when hit off the wall into those bubbles. It also exists in other cases, but I'm not sure what triggers it. What actually happens: The ball will sometimes set to the wrong cell, and my "dropping" code will detect it as a loner and drop it off the stage. *There are many implementations of "Frozen Bubble" on the web, but I can't for the life of me find a good explanation as to how the algorithm for the "Bubble Sticking" works. * I see this: http://www.wikiflashed.com/wiki/BubbleBobble https://frozenbubblexna.svn.codeplex.com/svn/FrozenBubble/ But I can't figure out the algorithims... could anyone explain possibly the general idea behind getting the balls to stick? Code in question: //Counstruct our bounding rectangle for use var nX = currentBall.x + ballvX * gameTime; var nY = currentBall.y - ballvY * gameTime; var movingRect = new BoundingRectangle(nX, nY, 32, 32); var able = false; //Iterate over the cells and draw our bubbles for (var x = 0; x < 8; x++) { for (var y = 0; y < 12; y++) { //Get the bubble at this layout var bubble = bubbleLayout[x][y]; var rowHeight = 27; //If this slot isn't empty, draw if (bubble != null) { var bx = 0, by = 0; if (y % 2 == 0) { bx = x * 32 + 270; by = y * 32 + 45; } else { bx = x * 32 + 270 + 16; by = y * 32 + 45; } //Check var targetBox = new BoundingRectangle(bx, by, 32, 32); if (targetBox.intersects(movingRect)) { able = true; } } } } cellY = Math.round((currentBall.y - 45) / 32); if (cellY % 2 == 0) cellX = Math.round((currentBall.x - 270) / 32); else cellX = Math.round((currentBall.x - 270 - 16) / 32); Any ideas are very much welcome. Things I've tried: Flooring and Ceiling values Changing the wall bounce to a lower value Slowing down the ball None of these seem to affect it. Is there something in my math I'm not getting?

    Read the article

  • Iterative and Incremental Principle Series 2: Finding Focus

    - by llowitz
    Welcome back to the second blog in a five part series where I recount my personal experience with applying the Iterative and Incremental principle to my daily life.  As you recall from part one of the series, a conversation with my son prompted me to think about practical applications of the Iterative and Incremental approach and I realized I had incorporated this principle in my exercise regime.    I have been a runner since college but about a year ago, I sustained an injury that prevented me from exercising.  When I was sufficiently healed, I decided to pick it up again.  Knowing it was unrealistic to pick up where I left off, I set a goal of running 3 miles or approximately for 30 minutes.    I was excited to get back into running and determined to meet my goal.  Unfortunately, after what felt like a lifetime, I looked at my watch and realized that I had 27 agonizing minutes to go!  My determination waned and my positive “I can do it” attitude was overridden by thoughts of “This is impossible”.   My initial focus and excitement was not sustained so I never met my goal.   Understanding that the 30 minute run was simply too much for me mentally, I changed my approach.   I decided to try interval training.  For each interval, I planned to walk for 3 minutes, then jog for 2 minutes, and finally sprint for 1 minute, and I planned to repeat this pattern 5 times.  I found that each interval set was challenging, yet achievable, leaving me excited and invigorated for my next interval.  I easily completed five intervals – or 30 minutes!!  My sense of accomplishment soared. What does this have to do with OUM?  Have you heard the saying -- “How do you eat an elephant?  One bite at a time!”?  This adage certainly applies in my example and in an OUM systems implementation.  It is easier to manage, track progress and maintain team focus for weeks at a time, rather than for months at a time.   With shorter milestones, the project team focuses on the iteration goal.  Once the iteration goal is met, a sense of accomplishment is experience and the team can be re-focused on a fresh, yet achievable new challenge.  Join me tomorrow as I expand the concept of Iterative and incremental by taking a step back to explore the recommended approach for planning your iterations.

    Read the article

  • An invitation to join a JDeveloper and ADF productivity clinic (and more!) at KScope

    - by Chris Muir
    Would you like a chance to influence Oracle's decisions on tool usability and productivity? If you're attending ODTUG's Kaleidoscope conference this year in San Antonio, Oracle would like to invite you to participate in our Usability Activity Research and separately our JDeveloper and ADF Productivity Clinics with our experienced user experience teams.  The teams are keen to hear what you have to say about your experiences with our tools in general and specifically JDeveloper and ADF.  The details of each event are described below. Invitation to Usability Activity - Sunday June 24th to Wednesday June 27th Oracle is constantly working on new tools and new features for developers, and invites YOU to become a key part of the process!  As a special addition to Kscope 12, Oracle will be conducting onsite usability research in the Alyssum room, from Sunday June 24 to Wednesday June 27. Usability activities are scheduled ahead of time for participants' convenience.  If you would like to take part, please fill out this form to let us know of the session(s) that you would like to attend and your development experience. You will be emailed with your scheduled session before the start of the conference. JDeveloper and ADF Productivity Clinic - Thursday June 28th Are you concerned that Java, Oracle ADF or JDeveloper is difficult? Is JDeveloper making you jump through hoops?  Do you hate a particular dialog or feature of JDeveloper? Well, come and get things off your chest! Oracle is hosting a product management and user experience clinic where we want to hear about your issues and concerns. What's difficult to use?  What doesn't work the way you want, and how would you want it to work?  What isn't behaving like your current favorite tool?  If we can't help on you the spot, we'll take your feedback and use it to improve the product experience.  A great opportunity to get answers, or get improvements. Drop by the Alyssum room, anytime from 8:30 to 10:30 on Thursday, June 28. We look forward to seeing you at KScope soon! 

    Read the article

  • Visual Studio Ultimate RoadMap

    - by TATWORTH
    At http://blogs.msdn.com/b/jasonz/archive/2012/03/27/visual-studio-ultimate-roadmap.aspx, Jason Zander has discussed the roadmap for Visual Studio 11 Ultimate. There are great advantages to Ultimate, if it is available to you, use it.At http://msdn.microsoft.com/en-us/library/ff636699.aspx, there is a list of feature packs for Visual Studio 10. Well worth a look if you have Visual Studio 10 Professional or Ultimate.

    Read the article

  • MatheMagics - Guess My Age Method 1

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved MatheMagic – Guess My Age – Method 1 The Mathemagician stands on the stage and asks an adult to do the following: ·         Do the next few steps on your calculator, or the calculator in your phone, or even on a piece of paper. ·         Do it silently! Don’t tell me the results until I ask for them directly ·         Compute a single digit multiple of 9 – any one of 9, 18, 27, … all the way to 81, will do. ·         Now multiply your age by 10 ·         Subtract the 9 multiple from this number. ·         Tell me the result. Notice that I don’t know which multiple of 9 you subtracted from 10 times your age. I will nonetheless immediately tell you what your age is. How do I do this? Let’s do the algebra. 10X – 9Y = 10X – 10Y + Y = 10(X – Y) + Y Now remember, you asked an adult, so his/her age is a two digit number (maybe even 3 digits), thus reducing it by the single digit multiplied by nine is still positive – the lowest is can be is 100 – 81 which yields 19. Now make two numbers out of the result. The last digit and the number before it. This number is X – Y or the age minus the single digit you selected. The last digit is this very single digit. This is always so regardless of the digit you selected. So… Add tis digit to the other number and you get back the age! Q.E.D Example: I am 76 years old and here is what happens when I do the steps 76 x 10 = 760 760 – 18 = 742 made of 74 and 2. My age is 74 + 2 760 – 81 = 679 made of 67 and 9. My age is 67 + 9 A note to the socially aware mathemagician – it is safer to do it with a man. The chances of a veracious answer are much, much higher! The trick may be accomplished on any 2 or 3 digit number, not just one’s age, but if you want to know your date’s age, it’s a good way to elicit it. That’s All Folks PS for more Ageless “Age” mathemagics go to www.mgsltns.com/games.htm and also here: http://geekswithblogs.net/PointsToShare/archive/2011/11/15/mathemagics---guess-my-age---method-2.aspx

    Read the article

  • Managing Regulated Content in WebCenter: USDM and Oracle Offer a New Part 11 Compliant Solution for Life Sciences

    - by Michael Snow
    Guest post today provided by Oracle partner, USDM  Regulated Content in WebCenterUSDM and Oracle offer a new Part 11 compliant solution for Life Sciences (White Paper) Life science customers now have the ability to take advantage of all of the benefits of Oracle’s WebCenter Content, a global leader in Enterprise Content Management.   For the past year, USDM has been developing best practice compliance solutions to meet regulated content management requirements for 21 CFR Part 11 in WebCenter Content. USDM has been an expert in ECM for life sciences since 1999 and in 2011, certified that WebCenter was a 21CFR Part 11 compliant content management platform (White Paper).  In addition, USDM has built Validation Accelerators Packs for WebCenter to enable life science organizations to quickly and cost effectively validate this world class solution.With the Part 11 certification, Oracle’s WebCenter now provides regulated life science organizations  the ability to manage REGULATORY content in WebCenter, as well as the ability to take advantage of ALL of the additional functionality of WebCenter, including  a complete, open, and integrated portfolio of portal, web experience management, content management and social networking technology.  Here are a few screen shot examples of Part 11 functionality included in the product: E-Sign, E-Sign Rendor, Meta Data History, Audit Trail Report, and Access Reporting. Gone are the days that life science companies have to spend millions of dollars a year to implement, maintain, and validate ECM systems that no longer meet the ever changing business and regulatory requirements.  Life science companies now have the ability to use WebCenter Content, an ECM system with a substantially lower cost of ownership and unsurpassed functionality.Oracle has been #1 in life sciences because of their ability to develop cost effective, easy-to-use, scalable solutions which help increase insight and efficiency to drive growth for their customers.  Adding a world class ECM solution to this product portfolio allows life science organizations the chance to get rid of costly ECM systems that no longer meet their needs and use WebCenter, part of the Oracle Fusion Technology stack, with their other leading enterprise applications.USDM provides:•    Expertise in Life Science ECM Business Processes•    Prebuilt Life Science Configuration in WebCenter •    Validation Accelerator Packs for WebCenterUSDM is very proud to support Oracle’s expanding commitment to Life Sciences…. For more information please contact:  [email protected] Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

    Read the article

  • Please Help Me Install Firestorm?

    - by Elle Caszatt
    I have been trying for hours just to install one program. In this time, I've tried my best to follow directions and not screw everything up but I have. I'm new to Linux. I tried to install Firestorm and this is what happened: parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' [sudo] password for parent: Enter the desired installation directory [/opt/firestorm-install]: /home/parent/downloads - Installing to /home/parent/downloads /home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh: line 80: /home/parent/downloads/etc/refresh_desktop_app_entry.sh: Permission denied parent@ubuntu:~$ sudo opt/firestorm-install sudo: opt/firestorm-install: command not found parent@ubuntu:~$ ./etc/refresh_desktop_app_entry.sh bash: ./etc/refresh_desktop_app_entry.sh: No such file or directory parent@ubuntu:~$ sudo '/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/install.sh' Enter the desired installation directory [/opt/firestorm-install]: /home/parent - Backing up previous installation to /home/parent.backup-2012-08-27 - Installing to /home/parent cp: cannot stat `/home/parent/Downloads/Phoenix_Firestorm-Release_i686_4.2.1.29803/*': No such file or directory Failed parent@ubuntu:~$ Now whenever I go into my files it says it can't find anything. Like Cannot find home/parent/Downloads. Now, I KNOW there are downloads. I don't know why it's doing this all of a sudden. I'm so frustrated that I'm ready to just go back to Windows. I've already had to uninstall/reinstall Ubuntu once today. It's looking like I"m going to have to do it again. How can I fix my file problem that I'm now having and can someone please, please tell me how to install Firestorm? I mean they don't even have their repository listed. It's ridiculous to have to go through this over a program. Spotify wasn't hard at all to install so why is this? Someone please help, and I'm sorry if I sound like a total idiot. I'm pretty tech savvy but I'm honestly pretty upset after struggling with this for hours. Edit Okay, I see the problem with the directory files (showing the error I mentioned above when I try to click on them). I can only access my downloads, desktop, ect, through the backup that was created when I tried to install Firestorm. It's like that's the real home now. How can I get it back to the way it was? Edit Ubuntu has stopped working for me on reboot now. It doesn't go past the login screen. This is exactly what happened when I had to uninstall it before after trying to install Firestorm. Maybe I'm giving up too easily but I think I'm just going to go back to Windows. If this is what's going to happen every time I innocently try to install a program then it's just not worth it. I installed it specifically to run Firestorm because Windows sucks up a lot of CPU and causes lag. I still appreciate any input but this is just too much hassle for something that shouldn't be hard.

    Read the article

  • ArchBeat Link-o-Rama for 2012-10-12

    - by Bob Rhubart
    This is your brain on IT architecture. Oracle Technology Network Architect Day in Los Angeles, Oct 25 This is your brain on IT architecture. Stuff your cranium with architecture by attending Oracle Technology Network Architect Day in Los Angeles, October 25, 2012, at the Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Technical sessions, panel Q&A, and peer roundtables--plus a free lunch. Register now. WebCenter Sites Gadget Development Concepts Quickstart | John Brunswick What are Gadgets? "At their most basic level they can be thought of as lightweight portlets that run largely on the client side of an architecture," says John Brunswick. "Gadgets provide a cross-platform container to run reusable UI modules that generally expose dynamic information to an end user, allowing for some level of end user customization." ORCLville: OOW 2012 - A Not So Brief Recap Oracle ACE Director Floyd Teter, an Applications & Apps Technology specialists, shares his personal, frank, and and extensive recap or Oracle OpenWorld 2012. Fusion Applications Technical Tips | Naveen Nahata "Setting memory parameters for Admin and Managed servers of various domains in Fusion Applications can be, let us say, a little daunting," says Oracle Fusion Middleware A-Team member Naveen Nahata. "While all this may look complicated and intimidating, it is actually relatively simple once you understand how it all works." Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. ExaLogic Hackers Night - November 19th Nürnberg Germany | WebLogic Partner Community EMEA Want to get your hands on Oracle Exalogic? Make your way to Nürnberg, Germany for this Exalogic Hacker's Night on November 19, 2012. Experts will be on hand to help you test your ideas. (The blog post is in English, but the event registration page is in German.) Thought for the Day "A foolish consistency is the hobgoblin of little minds…" — Ralph Waldo Emerson (May 25, 1803 – April 27, 1882) Source: SoftwareQuotes.com

    Read the article

  • Rendering My Fault Message

    - by onefloridacoder
    My coworkers setup  a nice way to get the fault messages from our service layer all the way back to the client’s service proxy layer.  This is what I needed to work on this afternoon.  Through a series of trials and errors I finally figured this out. The confusion was how I was looking at the exception in the quick watch viewer.  It appeared as though the EventArgs from the service call had somehow magically been cast back to FaultException(), not FaultException<T>.  I drilled into the EventArgs object with the quick watch and I copied this code to figure out where the Fault message was hiding.  Further, when I copied this quick watch code into the IDE I got squigglies.  Poop. 1: ((System 2: .ServiceModel 3: .FaultException<UnhandledExceptionFault>)(((System.Exception)(e.Result)).InnerException)).Detail.FaultMessage I wont bore you with the details but here’s how it turned out.   EventArgs which I’m calling “e” is not the result such as some collection of items you’re expecting.  It’s actually a FaultException, or in my case FaultException<T>.  Below is the calling code and the callback to handle the expected response or the fault from the completed event. 1: public void BeginRetrieveItems(Action<ObservableCollection<Model.Widget>> FindItemsCompleteCallback, Model.WidgetLocation location) 2: { 3: var proxy = new MyServiceContractClient(); 4:  5: proxy.RetrieveWidgetsCompleted += (s, e) => FindWidgetsCompleteCallback(FindWidgetsCompleted(e)); 6:  7: RetrieveWidgetsRequest request = new RetrieveWidgetsRequest { location.Id }; 8:  9: proxy.RetrieveWidgetsAsync(request); 10: } 11:  12: private ObservableCollection<Model.Widget> FindItemsCompleted(RetrieveWidgetsCompletedEventArgs e) 13: { 14: if (e.Error is FaultException<UnhandledExceptionFault>) 15: { 16: var fault = (FaultException<UnhandledExceptionFault>)e.Error; 17: var faultDetailMessage = fault.Detail.FaultMessage; 18:  19: UIMessageControlDuJour.Show(faultDetailMessage); 20: return new ObservableCollection<BinInventoryItemCountInfo>(); 21: } 22:  23: var widgets = new ObservableCollection<Model.Widget>(); 24:  25: if (e.Result.Widgets != null) 26: { 27: e.Result.Widgets.ToList().ForEach(w => widgets.Add(this.WidgetMapper.Map(w))); 28: } 29:  30: return widgets; 31: }

    Read the article

  • determine if udp socket can be accessed via external client

    - by JohnMerlino
    I don't have access to company firewall server. but supposedly the port 1720 is open on my one ubuntu server. So I want to test it with netcat: sudo nc -ul 1720 The port is listening on the machine ITSELF: sudo netstat -tulpn | grep nc udp 0 0 0.0.0.0:1720 0.0.0.0:* 29477/nc The port is open and in use on the machine ITSELF: lsof -i -n -P | grep 1720 gateway 980 myuser 8u IPv4 187284576 0t0 UDP *:1720 Checked the firewall on current server: sudo ufw allow 1720/udp Skipping adding existing rule Skipping adding existing rule (v6) sudo ufw status verbose | grep 1720 1720/udp ALLOW IN Anywhere 1720/udp ALLOW IN Anywhere (v6) But I try echoing data to it from another computer (I replaced the x's with the real integers): echo "Some data to send" | nc xx.xxx.xx.xxx 1720 But it didn't write anything. So then I try with telnet from the other computer as well: telnet xx.xxx.xx.xxx 1720 Trying xx.xxx.xx.xxx... telnet: connect to address xx.xxx.xx.xxx: Operation timed out telnet: Unable to connect to remote host Although I don't think telnet works with udp sockets. I ran nmap from another computer within the same local network and this is what I got: sudo nmap -v -A -sU -p 1720 xx.xxx.xx.xx Starting Nmap 5.21 ( http://nmap.org ) at 2013-10-31 15:41 EDT NSE: Loaded 36 scripts for scanning. Initiating Ping Scan at 15:41 Scanning xx.xxx.xx.xx [4 ports] Completed Ping Scan at 15:41, 0.10s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:41 Completed Parallel DNS resolution of 1 host. at 15:41, 0.00s elapsed Initiating UDP Scan at 15:41 Scanning xtremek.com (xx.xxx.xx.xx) [1 port] Completed UDP Scan at 15:41, 0.07s elapsed (1 total ports) Initiating Service scan at 15:41 Initiating OS detection (try #1) against xtremek.com (xx.xxx.xx.xx) Retrying OS detection (try #2) against xtremek.com (xx.xxx.xx.xx) Initiating Traceroute at 15:41 Completed Traceroute at 15:41, 0.01s elapsed NSE: Script scanning xx.xxx.xx.xx. NSE: Script Scanning completed. Nmap scan report for xtremek.com (xx.xxx.xx.xx) Host is up (0.00013s latency). PORT STATE SERVICE VERSION 1720/udp closed unknown Too many fingerprints match this host to give specific OS details Network Distance: 1 hop TRACEROUTE (using port 1720/udp) HOP RTT ADDRESS 1 0.13 ms xtremek.com (xx.xxx.xx.xx) Read data files from: /usr/share/nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 2.04 seconds Raw packets sent: 27 (2128B) | Rcvd: 24 (2248B). The only thing I can think of is a firewall or vpn issue. Is there anything else I can check for before requesting that they look at the firewall server again?

    Read the article

  • Career advice: stay with PHP or start a new career in something else ( .Net?)

    - by Christian P
    I'm planning on moving to NY in 6-12 months tops, so I'm forced to find a new job. When I'm planing to start my life in another city it's also probably a good time to think about career changes. I've found a lot of different opinions about PHP vs .Net vs Java and this is not topic here. I don't want to start a new fight about which language is better. Knowing programming language is not the most important thing for being a software developer. To be a really good developer you need to know OOP, design patterns, testing... and language is just a tool to make things happen. So back to my question. I have mixed experience in IT - 1 year as an IT support guy (Windows administration and support), around 2 years of experience in embedded programming (VB.Net 2005) and for the last 2 years I'm working with PHP/MySQL. I have worked with Magento web shop, assisted in some projects in Symfony, modified few Drupal sites. My main concerns are following: Do I continue to improve my skills in PHP e.g. to start learning some major PHP framework like Zend, Symfony maybe get some PHP certification. Or do I start learning .NET or Java. I'm more familiar to .NET so I'll probably choose it if choice falls between .NET and Java ( or you could convince me to choose Java :). Career-wise, I don't know what is the best choice. Learning new framework and language is more time consuming then improving my existing skills in PHP. But with .NET you have a lot of possibilities (Windows 7 Phone development, Silverlight, WPF) and possibly bigger chances to find better jobs. PHP jobs are less payed then .NET, at least, according to my researches (correct me if I'm wrong). But if I start now with .NET I'm just a beginner and my salary will be low. I need at least 2+ years of experience in some language to even try to find some job that is paying higher than $50-60k in NY. My main goal in next 2-3 years is to try to find a job in a $60-80k category. Don't get me wrong, I'm not just chasing money, but money is an important factor when you're trying to start a family. I'm 27 years old and I feel that there isn't a lot of room for wrong decisions regarding my career, so any advice will be very welcome. Update Thank you all for spending time to help me with my problem. All of the answers and comments have been very helpful. I have decided to stick with PHP but also to learn C# and Silverlight 4. We'll see where the life will take me.

    Read the article

  • ClearTrace Performance on 170GB of Trace Files

    - by Bill Graziano
    I’ve always worked to make ClearTrace perform well.  That’s probably because I spend so much time watching it work.  I’m often going through two or three gigabytes of trace files but I rarely get the chance to run it on a really large set of files. One of my clients wanted to run a full trace for a week and then analyze the results.  At the end of that week we had 847 200MB trace files for a total of nearly 170GB. I regularly use 200MB trace files when I monitor production systems.  I usually get around 300,000 statements in a file that size if it’s mostly stored procedures.  So those 847 trace files contained roughly 250 million statements.  (That’s 730 bytes per statement if you’re keeping track.  Newer trace files have some compression in them but I’m not exactly sure what they’re doing.)  On a system running 1,000 statements per second I get a new file every five minutes or so. It took 27 hours to process these files on an older development box.  That works out to 1.77MB/second.  That means ClearTrace processed about 2,654 statements per second. You can query the data while you’re loading it but I’ve found it works better to use a second instance of ClearTrace to do this.  I’m not sure why yet but I think there’s still some dependency between the two processes. ClearTrace is almost always CPU bound.  It’s really just a huge, ugly collection of regular expressions.  It only writes a summary to its database at the end of each trace file so that usually isn’t a bottleneck.  At the end of this process, the executable was using roughly 435MB of RAM.  Certainly more than when it started but I think that’s acceptable. The database where all this is stored started out at 100MB.  After processing 170GB of trace files the database had grown to 203MB.  The space savings are due to the “datawarehouse-ish” design and only storing a summary of each trace file. You can download ClearTrace for SQL Server 2008 or test out the beta version for SQL Server 2012.  Happy Tuning!

    Read the article

  • Silverlight and WCF caching

    - by subodhnpushpak
    There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

    Read the article

  • Best Practice Method for Including Images in a DataGrid using MVVM

    - by Killercam
    All, I have a WPF DataGrid. This DataGrid shows files ready for compilation and should also show the progress of my compiler as it compiles the files. The format of the DataGrid is Image|File Path|State -----|---------|----- * |C:\AA\BB |Compiled & |F:PP\QQ |Failed > |G:HH\LL |Processing .... The problem is the image column (the *, &, and are for representation only). I have a ResourceDictionary that contains hundreds of vector images as Canvas objects: <ResourceDictionary xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"> <Canvas x:Key="appbar_acorn" Width="48" Height="48" Clip="F1 M 0,0L 48,0L 48,48L 0,48L 0,0"> <Path Width="22.3248" Height="25.8518" Canvas.Left="13.6757" Canvas.Top="11.4012" Stretch="Fill" Fill="{DynamicResource BlackBrush}" Data="F1 M 16.6309,18.6563C 17.1309,8.15625 29.8809,14.1563 29.8809,14.1563C 30.8809,11.1563 34.1308,11.4063 34.1308,11.4063C 33.5,12 34.6309,13.1563 34.6309,13.1563C 32.1309,13.1562 31.1309,14.9062 31.1309,14.9062C 41.1309,23.9062 32.6309,27.9063 32.6309,27.9062C 24.6309,24.9063 21.1309,22.1562 16.6309,18.6563 Z M 16.6309,19.9063C 21.6309,24.1563 25.1309,26.1562 31.6309,28.6562C 31.6309,28.6562 26.3809,39.1562 18.3809,36.1563C 18.3809,36.1563 18,38 16.3809,36.9063C 15,36 16.3809,34.9063 16.3809,34.9063C 16.3809,34.9063 10.1309,30.9062 16.6309,19.9063 Z "/> </Canvas> </ResourceDictionary> Now, I want to be able to include these in my image column and change them at run-time. I was going to attempt to do this by setting up a property in my View Model that was of type Image and binding this to my View via: <DataGrid.Columns> <DataGridTemplateColumn Header="" Width="SizeToCells" IsReadOnly="True"> <DataGridTemplateColumn.CellTemplate> <DataTemplate> <Image Source="{Binding Canvas}"/> </DataTemplate> </DataGridTemplateColumn.CellTemplate> </DataGridTemplateColumn> </DataGrid.Columns> Where in the View Model I have the appropriate property. Now, I was told this is not 'pure' MVVM. I don't fully accept this, but I want to know if there is a better way of doing this. Say, binding to an enum and using a converter to get the image? Any advice would be appreciated.

    Read the article

  • Oracle Data Protection: How Do You Measure Up? - Part 1

    - by tichien
    This is the first installment in a blog series, which examines the results of a recent database protection survey conducted by Database Trends and Applications (DBTA) Magazine. All Oracle IT professionals know that a sound, well-tested backup and recovery strategy plays a foundational role in protecting their Oracle database investments, which in many cases, represent the lifeblood of business operations. But just how common are the data protection strategies used and the challenges faced across various enterprises? In January 2014, Database Trends and Applications Magazine (DBTA), in partnership with Oracle, released the results of its “Oracle Database Management and Data Protection Survey”. Two hundred Oracle IT professionals were interviewed on various aspects of their database backup and recovery strategies, in order to identify the top organizational and operational challenges for protecting Oracle assets. Here are some of the key findings from the survey: The majority of respondents manage backups for tens to hundreds of databases, representing total data volume of 5 to 50TB (14% manage 50 to 200 TB and some up to 5 PB or more). About half of the respondents (48%) use HA technologies such as RAC, Data Guard, or storage mirroring, however these technologies are deployed on only 25% of their databases (or less). This indicates that backups are still the predominant method for database protection among enterprises. Weekly full and daily incremental backups to disk were the most popular strategy, used by 27% of respondents, followed by daily full backups, which are used by 17%. Interestingly, over half of the respondents reported that 10% or less of their databases undergo regular backup testing.  A few key backup and recovery challenges resonated across many of the respondents: Poor performance and impact on productivity (see Figure 1) 38% of respondents indicated that backups are too slow, resulting in prolonged backup windows. In a similar vein, 23% complained that backups degrade the performance of production systems. Lack of continuous protection (see Figure 2) 35% revealed that less than 5% of Oracle data is protected in real-time.  Management complexity 25% stated that recovery operations are too complex. (see Figure 1)  31% reported that backups need constant management. (see Figure 1) 45% changed their backup tools as a result of growing data volumes, while 29% changed tools due to the complexity of the tools themselves. Figure 1: Current Challenges with Database Backup and Recovery Figure 2: Percentage of Organization’s Data Backed Up in Real-Time or Near Real-Time In future blogs, we will discuss each of these challenges in more detail and bring insight into how the backup technology industry has attempted to resolve them.

    Read the article

  • Apache 2.4 + PHP-FPM + ProxyPassMatch

    - by apfelbox
    I recently installed Apache 2.4 on my local machine, together with PHP 5.4.8 using PHP-FPM. Everything went quite smoothly (after a while...) but there is still a strange error: I configured Apache for PHP-FPM like this: <VirtualHost *:80> ServerName localhost DocumentRoot "/Users/apfelbox/WebServer" ProxyPassMatch ^/(.*\.php(/.*)?)$ fcgi://127.0.0.1:9000/Users/apfelbox/WebServer/$1 </VirtualHost> It works, for example if I call http://localhost/info.php I get the correct phpinfo() (it is just a test file). If I call a directory however, I get a 404 with body File not found. and in the error log: [Tue Nov 20 21:27:25.191625 2012] [proxy_fcgi:error] [pid 28997] [client ::1:57204] AH01071: Got error 'Primary script unknown\n' Update I now tried doing the proxying with mod_rewrite: <VirtualHost *:80> ServerName localhost DocumentRoot "/Users/apfelbox/WebServer" RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^/(.*\.php(/.*)?)$ fcgi://127.0.0.1:9000/Users/apfelbox/WebServer/$1 [L,P] </VirtualHost> But the problem is: it is always redirecting, because on http://localhost/ automatically http://localhost/index.php is requested, because of DirectoryIndex index.php index.html Update 2 Ok, so I think "maybe check whether there is a file to give to the proxy first: <VirtualHost *:80> ServerName localhost DocumentRoot "/Users/apfelbox/WebServer" RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} -f RewriteRule ^/(.*\.php(/.*)?)$ fcgi://127.0.0.1:9000/Users/apfelbox/WebServer/$1 [L,P] </VirtualHost> Now the complete rewriting does not work anymore... Update 3 Now I have this solution: ServerName localhost DocumentRoot "/Users/apfelbox/WebServer" RewriteEngine on RewriteCond /Users/apfelbox/WebServer/%{REQUEST_FILENAME} -f RewriteRule ^/(.*\.php(/.*)?)$ fcgi://127.0.0.1:9000/Users/apfelbox/WebServer/$1 [L,P] First check, that there is a file to pass to PHP-FPM (with the full and absolute path) and then do the rewriting. This does not work when using URL rewriting inside a subdirectory, also it fails for URLs like http://localhost/index.php/test/ So back to square one. Any ideas?

    Read the article

  • Apache - child process exited with status 255

    - by Brian
    I am running Windows 7 64-bit with an older version of (Apache 2.0.59) and PHP 5.2 - just switched from XP and wanted to keep the same versions. Everything will initially be working fine, but then I'll be trying to load a page and Apache crashes. I'll get an error in the browser that says "The connection to the server was reset while the page was loading." Then Apache stops running. Sometimes it can be restarted, but then crashes again on the next page load. Sometimes it can't even be restarted at all. Looking in the Apache error logs, I see a series of messages that goes something like: [notice] Apache/2.0.59 (Win32) PHP/5.2.13 configured -- resuming normal operations [notice] Server built: Jul 27 2006 15:55:03 [notice] Parent: Created child process 1220 [notice] Child 1220: Child process is running [notice] Child 1220: Acquired the start mutex. [notice] Child 1220: Starting 250 worker threads. [notice] Parent: child process exited with status 255 -- Restarting. I have just come from Win XP where I never had any problems - is this an issue with my Apache version on Win7? Or perhaps it's a configuration issue? Any help would be greatly appreciated, I've done days of research and found nothing helpful. Thanks, Brian

    Read the article

  • Error with python-setuptools doing "sudo easy_install python-graph-core"

    - by Dan
    Using easy_install, part of the python-setuptools, I get the following error: $ sudo easy_install python-graph-core [sudo] password for dan: Searching for python-graph-core Reading http://pypi.python.org/simple/python-graph-core/ Reading http://code.google.com/p/python-graph/ Reading http://code.google.com/p/python-graph/downloads/list?can=1 Reading http://code.google.com/p/python-graph/downloads/list Best match: python-graph-core 1.7.0 Downloading http://python-graph.googlecode.com/files/python-graph-core-1.7.0.tar.gz Processing python-graph-core-1.7.0.tar.gz Running python-graph-core-1.7.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-GwpYiM/python-graph-core-1.7.0/egg-dist-tmp-1yqbyV setup.py:8: Warning: 'as' will become a reserved keyword in Python 2.6 Traceback (most recent call last): File "/usr/bin/easy_install", line 8, in <module> load_entry_point('setuptools==0.6c9', 'console_scripts', 'easy_install')() File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 1671, in main with_ei_usage(lambda: File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 1659, in with_ei_usage return f() File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 1675, in <lambda> distclass=DistributionWithoutHelpCommands, **kw File "/usr/lib/python2.5/distutils/core.py", line 151, in setup dist.run_commands() File "/usr/lib/python2.5/distutils/dist.py", line 974, in run_commands self.run_command(cmd) File "/usr/lib/python2.5/distutils/dist.py", line 994, in run_command cmd_obj.run() File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 211, in run self.easy_install(spec, not self.no_deps) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 446, in easy_install return self.install_item(spec, dist.location, tmpdir, deps) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 476, in install_item dists = self.install_eggs(spec, download, tmpdir) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 655, in install_eggs return self.build_and_install(setup_script, setup_base) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 930, in build_and_install self.run_setup(setup_script, setup_base, args) File "/usr/lib/python2.5/site-packages/setuptools/command/easy_install.py", line 919, in run_setup run_setup(setup_script, args) File "/usr/lib/python2.5/site-packages/setuptools/sandbox.py", line 27, in run_setup lambda: execfile( File "/usr/lib/python2.5/site-packages/setuptools/sandbox.py", line 63, in run return func() File "/usr/lib/python2.5/site-packages/setuptools/sandbox.py", line 29, in <lambda> {'__file__':setup_script, '__name__':'__main__'} File "setup.py", line 8 except ImportError as ie: ^ SyntaxError: invalid syntax Any suggestions to what I may be doing wrong? Thanks, Dan

    Read the article

  • Problem with apache + ssl: length mismatch error and ocasional bad request

    - by Ruben Garat
    we migrated a server from slicehost to linode recently, we copied the config from one server to the other. Everything works perfectly except that we get: Occasional errors with "Bad Request", this error is not common, you can use it all day and not see it, and the next day it will happen a lot. apart from that, a lot of the time, event though the request works fine we get some errors. using ssldump we get: New TCP connection #1: myip(39831) <-> develserk(443) 1 1 0.2316 (0.2316) C>S SSLv2 compatible client hello Version 3.1 cipher suites Unknown value 0x39 Unknown value 0x38 Unknown value 0x35 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA SSL2_CK_3DES Unknown value 0x33 Unknown value 0x32 Unknown value 0x2f SSL2_CK_RC2 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 SSL2_CK_RC4 TLS_DHE_RSA_WITH_DES_CBC_SHA TLS_DHE_DSS_WITH_DES_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA SSL2_CK_DES TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 SSL2_CK_RC2_EXPORT40 TLS_RSA_EXPORT_WITH_RC4_40_MD5 SSL2_CK_RC4_EXPORT40 1 2 0.2429 (0.0112) S>C Handshake ServerHello Version 3.1 session_id[32]= 9a 1e ae c4 5f df 99 47 97 40 42 71 97 eb b9 14 96 2d 11 ac c0 00 15 67 4e f3 7d 65 4e c4 30 e9 cipherSuite Unknown value 0x39 compressionMethod NULL 1 3 0.2429 (0.0000) S>C Handshake Certificate 1 4 0.2429 (0.0000) S>C Handshake ServerKeyExchange 1 5 0.2429 (0.0000) S>C Handshake ServerHelloDone 1 6 0.4965 (0.2536) C>S Handshake ClientKeyExchange 1 7 0.4965 (0.0000) C>S ChangeCipherSpec 1 8 0.4965 (0.0000) C>S Handshake 1 9 0.5040 (0.0075) S>C ChangeCipherSpec 1 10 0.5040 (0.0000) S>C Handshake ERROR: Length mismatch from the apache error.log [Fri Aug 27 14:50:05 2010] [debug] ssl_engine_io.c(1892): OpenSSL: I/O error, 5 bytes expected to read on BIO#b80c1e70 [mem: b8100918] the server is ubuntu 10.04.1 the apache version is 2.2.14-5ubuntu8 the openssl version is 0.9.8k-7ubuntu8

    Read the article

  • php-fpm: very high server load

    - by Derp Derpington
    Since today my webserver (nginx + php-fpm + mysql on a VPS) is very slow. htop says: 1 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Tasks: 63 total, 13 running 2 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Load average: 11.67 10.95 6.95 3 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Uptime: 00:18:40 4 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 5 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 6 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Mem[||||||||||| 137/1280MB] Swp[ 0/0MB] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 6802 www 20 0 76232 12320 5716 R 27.0 0.9 0:06.48 php-fpm: pool www 7048 www 20 0 75200 12136 5700 R 52.0 0.9 0:03.64 php-fpm: pool www 6699 www 20 0 74176 11124 5700 R 27.0 0.8 0:07.36 php-fpm: pool www 7029 www 20 0 73668 10380 5676 R 42.0 0.8 0:03.52 php-fpm: pool www 6995 www 20 0 76228 12456 5644 R 42.0 1.0 0:03.98 php-fpm: pool www 6858 www 20 0 74172 10684 5620 R 35.0 0.8 0:05.52 php-fpm: pool www 6998 www 20 0 75200 12072 5620 R 37.0 0.9 0:03.95 php-fpm: pool www 7098 www 20 0 75200 12052 5616 R 42.0 0.9 0:02.33 php-fpm: pool www 7093 www 20 0 76228 12496 5612 R 37.0 1.0 0:03.02 php-fpm: pool www 7226 www 20 0 74692 11080 5588 R 32.0 0.8 0:00.66 php-fpm: pool www CPU: (cat /proc/cpuinfo | grep model) model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz I think a load of 10 and 100% cpu usage is not normal... How can i fix that?

    Read the article

  • How to resolve Windows Update Error 8024402F on Windows 7 Home Premium 64bit?

    - by Day
    I have been having the same problem with Windows Updates on 2 of my machines at home, both running Windows 7 Home Premium 64-bit. One of the 2 machines is a brand new install, the other has run Windows Update in the past, but is also not working now. When I manually check for updates using the Control Panel, I get error code 8024402F: I followed the link to "Get help with this error", which brings up several articles in Windows Help and Support, none of which are for this specific error code. From the help and general googling I've tried: Checking internet connectivity. Most of the help suggests that this error is caused by a general internet connectivity problem. But if you're reading this, my connection is definitely working fine. Disabling antivirus temporarily and trying to run Windows Update. This didn't help (I run AVG free) Running Control Panel - Troubleshooting - Security Systems - Fix Problems with Windows Update. This said it detected and resolved problems, but didn't help. Update using IE (as I used to in XP). Go to http://windowsupdate.microsoft.com/ redirects me to http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx for which IE displays a "connection problem" (i.e. site unreachable) I've had the same problem for 24 hours now, so surely the Windows Update servers haven't been down this whole time? A quick check on twitter shows no worldwide outcry about Windows Update being unavailable, so is it just me? I'm based in the UK, but I notice that the http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx URL is also unavailable using ''wget'' from my webserver in Chicago. day@ord1:~$ wget http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx --2011-03-17 00:01:27-- http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx Resolving test.update.microsoft.com... failed: Name or service not known. wget: unable to resolve host address `test.update.microsoft.com' day@ord1:~$ host test.update.microsoft.com Host test.update.microsoft.com not found: 3(NXDOMAIN)

    Read the article

  • Mac OS X Server (10.5) mail trapped in queue

    - by Meltemi
    We've got mail accumulating in our Leopard Server's queue and not sure exactly why. This machine has required little maintenance over the years so I'm hoping someone here spot the obvious and save us some time. Let me know what other information would be helfull. Server appears to be functioning normally except for "clogged" queue and the following error associated with each "trapped" message: Looking at messages in the queue each one states something like this: Message ID: 4213C3B8B3F Date: October 27, 2009 11:33:27 AM Size: 1824 Sender: [email protected] Recipient(s) & Status: ---------------------- [email protected]: connect to 127.0.0.1[127.0.0.1]: Connection refused Under SettingsRelay we have checked Accept SMTP relays only from these hosts and networks: 127.0.0.0/8 10.0.1.0/24 The mail in queue is addressed to users whose accounts are on this server. Mail.app on the client appears to be functioning normally and checking checking mail on the server. We did add a virtual domain some time ago but all that was working fine for some time... This just started happening recently...any ideas? Edit: toggling the filter services on and off seems to have fixed this except for 2 remaining queued messages that show "mail transport unavailable" as an error!?!

    Read the article

  • OSX telnet not working from localhost

    - by Stewie
    Telnet from my mac OSx doesn't work while it works from the AWS instances and other networks. I have no local firewalls. Nothing related in /var/log/system In the below transcript, the telnet hangs at "Trying 74.125.136.26..." I have tried many different addresses across multiple domains.. same result ! Rocky-Balboas-MacBook-Pro:~ rocky$ Rocky-Balboas-MacBook-Pro:~ rocky$ dig gmail.com MX +short 30 alt3.gmail-smtp-in.l.google.com. 40 alt4.gmail-smtp-in.l.google.com. 10 alt1.gmail-smtp-in.l.google.com. 20 alt2.gmail-smtp-in.l.google.com. 5 gmail-smtp-in.l.google.com. Rocky-Balboas-MacBook-Pro:~ rocky$ telnet alt2.gmail-smtp-in.l.google.com 25 Trying 74.125.136.26... ^C Rocky-Balboas-MacBook-Pro:~ rocky$ telnet localhost 80 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ^C Connection closed by foreign host. Rocky-Balboas-MacBook-Pro:~ rocky$ edit: let the telnet command run and here are the results telnet: connect to address 74.125.136.27: Operation timed out Trying 2a00:1450:4013:c01::1a... telnet: connect to address 2a00:1450:4013:c01::1a: No route to host telnet: Unable to connect to remote host

    Read the article

  • VirtualBox Issue: virtualbox changed my Computer Name's ip address in Windows

    - by suud
    I had installed virtualbox 4.2.2 in Windows 7. My Computer Name is: MY-PC My IP address (using ipconfig /all command) is: 192.168.1.101 My IP is dynamic and I set DNS to google dns (8.8.8.8) When I ping MY-PC, I got this result: Pinging MY-PC [192.168.56.1] with 32 bytes of data: Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 My virtualbox was not running and I expected the ip adress of MY-PC is 192.168.1.101, not 192.168.56.1 Then I run command: nbtstat -a MY-PC and I got this result: VirtualBox Host-Only Network: Node IpAddress: [192.168.56.1] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 08-00-27-00-60-B3 Local Area Connection: Node IpAddress: [0.0.0.0] Scope Id: [] Host not found. Wireless Network Connection: Node IpAddress: [192.168.1.101] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 94-0C-6D-E5-6D-5D So it seems virtualbox caused this problem. I want to know how to change back my Computer Name's ip address to 192.168.1.101 (or any ip address that set by my internet connection)?

    Read the article

  • Linux AMD-FX 8350 temperature monitoring

    - by HyperDevil
    I’m trying to get the CPU temperature for my AMD-FX8350 on Debian Squeeze. I ran sensors-detect and then sensors, but I only get my motherboard sensors (it8720-isa-0228). There are three temperature values there but I assume those are not for the CPU. it8720-isa-0228 Adapter: ISA adapter in0: +1.36 V (min = +0.00 V, max = +4.08 V) in1: +1.50 V (min = +0.00 V, max = +4.08 V) in2: +3.38 V (min = +0.00 V, max = +4.08 V) in3: +2.93 V (min = +0.00 V, max = +4.08 V) in4: +3.07 V (min = +0.00 V, max = +4.08 V) in5: +4.08 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.93 V (min = +0.00 V, max = +4.08 V) Vbat: +3.01 V fan1: 3375 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1730 RPM (min = 10 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +53.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +65.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode cpu0_vid: +0.000 V Is there anything I am missing? I also loaded the K8temp and K10temp modules and ran sensor-detect without any results. I do see this message in dmesg: hwmon-vid: Unknown VRM version of your x86 CPU

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >