Search Results

Search found 89257 results on 3571 pages for 'need fix at userlevel'.

Page 58/3571 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Zend_Registry - Do you need getInstance() ?

  - by Jesse

  Hey I'm wondering when accessing Zend_Registry in an application if you need to include getInstance() and if so, why? for example Zend_Registry::getInstance()-get('db'); vs. Zend_Registry::get('db'); they both seem to work with the later being less verbose. I vaguely understand that Zend_Registry is a singleton, which I think means there can only be one instance of it? so why would you need getInstance()?

  Read the article

• Creating a new PC, need suggestions on parts [closed]

  - by zilentworld

  I want to build a new PC and went around PC Stores to ask for quotations with only some parts that i want and the rest are filled up by them. Here is the "best" i got Core i5 3550 4gb ram ddr3 (planning to get 8,no brand yet) 500gb hdd (no brand yet) GTX550Ti 1g DDR5 Asus P8H61 ATX Casing Here is what i have from my last PC: Huntkey green power 500w Hyper TX3 Evo I want a dual monitor pc which will be used mostly for gaming,programming and i do a lot of multitasking. Im not planning YET to OC my cpu but i will in the near future. So can i ask for suggestions on what to change on my list? my budget is about 800$ (including 2nd monitor)

  Read the article

• Debian virtual server hangs on reboot, need help debugging

  - by BubuIIC

  I'm admin of a Debian 6 virtual server. I've been trying to diagnose this problem for a while but haven't gotten anything. The server hangs every time I want to reboot it. All services seem to be shutting down, I lose ssh connection. Then nothing. I have to restart it through the hoster's web-interface, which just gives me the options "Normal Boot" and "Rescue System". Normal boot then brings the server back to life. Possibly (probably?) related, the server does not boot into a newer kernel version, it's running 2.6.18 right now, but installed is actually 2.6.32. I don't know whether it hangs on shutdown or on startup, but booting through the web-interface works (except the kernel part). Am I missing something obvious? Where should I start looking? I have no idea how to diagnose the problem.

  Read the article

• Do I need to Sysprep Windows 7

  - by Cell-o

  Let's say I have one image and I want to put same image on many identical lenovo laptop's. These new machines have site licence (Office 2010, Windows 7). My questions : 1 - What software do you recommended for this project? e.g Acronis True Image , Clonezilla ,MDT 2 - How do I take the image? after Win 7 and Office 2010 activate process or before ? I'm very confused. e.g : many website saying "you must sysprep when deploying Windows 7 machine." is that correct? if this is correct why?

  Read the article

• Need help configuring NAT

  - by QuinnFTW

  First of all, the router I am using is a Cisco WRVS4400N. My company runs a software which handles the MySQL database of all of their products. The software now has an e-commerce module, so I have to set up a secure tunnel from our network to the server that will be hosting our e-commerce site so that when the database is updated, the site will also be updated. The technician completeing the job said there is an IP conflict, and has asked me to NAT 192.168.0.0/24 to 192.168.115.0/24. I am not really sure how to do this, and they want to charge $150 an hour to do it for me. Can anyone help?

  Read the article

• Need to download a .mov file from a hyperlink

  - by user36992

  Hi, I have a .mov file that is embedded in a hyperlink. Just wondering if there is any windows software that will allow me to do this? Thanks

  Read the article

• Do I need JDK or only JRE?

  - by Camran

  I use Solr in my website, and now I am about to configure my VPS account. I am at the stage where I need to install java in order to make Solr work. Now, I only plan on running solr, and using it as it is (I have no java programming skills at all), so my Q is, do I need the entire JDK which includes JRE, or is JRE enough? Thanks BTW: My server OS is Linux (ubuntu 9.10). Thanks

  Read the article

• i need some help with my vb.net codes..plzz

  - by akmalizhar

  currently i need to develop an application that can exctract information from few website.. this is what i have done up until now.. Imports System Imports System.Text.RegularExpressions Imports System.IO Imports System.Net Imports System.Web Imports System.Data.SqlClient Imports System.Threading Imports System.Data.DataSet Imports System.Data.OleDb Module module1 Dim url As String Dim hotelName As String = "" Sub Main() Dim url As String = "" Console.Write("enter url: ") url = Console.ReadLine() extractor(url) End Sub Public Sub extractor(ByVal url As String) Dim strConn As String = "Data Source = localhost; Initial Catalog = knowledgeBase; Integrated Security = True; Connection Timeout = 0;" Dim conn As SqlConnection = New SqlConnection(strConn) conn.Open() Dim strSQL1 As String Dim matchStn1 As String = "" Dim matchstn2 As String = "" Dim matchstn3 As String = "" Dim matchstn4 As String = "" Dim matchstn5 As String = "" Dim matchstn6 As String = "" Dim matchstn7 As String = "" Dim matchstn8 As String = "" Dim matchstn9 As String = "" Dim matchstn10 As String = "" Dim objRequest As WebRequest = HttpWebRequest.Create(url) Dim objResponse As WebResponse = objRequest.GetResponse() Dim objStreamReader As New StreamReader(objResponse.GetResponseStream()) Dim strpage As String = objStreamReader.ReadToEnd Dim RegExStr As String = "<[^>]*>" Dim R As New Regex(RegExStr) Dim sourcestring As String = strpage Dim re As Regex = New Regex("<h2 class=""name hotel""[^>]*>[\s\S]+?</h2>") Dim mc As MatchCollection = re.Matches(sourcestring) Dim mIdx As Integer = 0 For Each m As Match In mc For groupIdx As Integer = 0 To m.Groups.Count - 1 matchStn1 = m.Groups(groupIdx).Value matchStn1 = R.Replace(matchStn1, " ") matchStn1 = matchStn1.Trim() Next mIdx = mIdx + 1 Next Dim re9 As Regex = New Regex("<li class=""cuisine""[^>]*>[^>]+</li>") Dim mc9 As MatchCollection = re9.Matches(sourcestring) Dim mIdx9 As Integer = 0 For Each m As Match In mc9 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn9 = m.Groups(groupIdx).Value matchstn9 = R.Replace(matchstn9, " ") matchstn9 = matchstn9.Trim() Next mIdx = mIdx + 1 Next Dim re2 As Regex = New Regex("<span class=""street-address""[^>]*>[^>]+</span>") Dim mc2 As MatchCollection = re2.Matches(sourcestring) Dim mIdx2 As Integer = 0 For Each m As Match In mc2 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn2 = m.Groups(groupIdx).Value matchstn2 = R.Replace(matchstn2, " ") matchstn2 = matchstn2.Trim() Next mIdx2 = mIdx2 + 1 Next Dim re3 As Regex = New Regex("<span class=""locality""[^>]*>[\s\S]+?</span>") Dim mc3 As MatchCollection = re3.Matches(sourcestring) Dim mIdx3 As Integer = 0 For Each m As Match In mc3 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn3 = m.Groups(groupIdx).Value matchstn3 = R.Replace(matchstn3, " ") matchstn3 = matchstn3.Trim() Next mIdx3 = mIdx3 + 1 Next Dim re4 As Regex = New Regex("<span property=""v:postal-code""[^>]*>[\s\S]+?</span>") Dim mc4 As MatchCollection = re4.Matches(sourcestring) Dim mIdx4 As Integer = 0 For Each m As Match In mc4 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn4 = m.Groups(groupIdx).Value matchstn4 = R.Replace(matchstn4, " ") matchstn4 = matchstn4.Trim() Next mIdx4 = mIdx4 + 1 Next Dim re5 As Regex = New Regex("<span class=""country-name""[^>]*>[\s\S]+?</span>") Dim mc5 As MatchCollection = re5.Matches(sourcestring) Dim mIdx5 As Integer = 0 For Each m As Match In mc5 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn5 = m.Groups(groupIdx).Value matchstn5 = R.Replace(matchstn5, " ") matchstn5 = matchstn5.Trim() Next mIdx5 = mIdx5 + 1 Next Dim re10 As Regex = New Regex("<address class=""adr""[^>]*>[\s\S]+?</address>") Dim mc10 As MatchCollection = re10.Matches(sourcestring) Dim mIdx10 As Integer = 0 For Each m As Match In mc10 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn10 = m.Groups(groupIdx).Value matchstn10 = R.Replace(matchstn10, " ") matchstn10 = matchstn10.Trim() strSQL1 = "insert into infoRestaurant (nameRestaurant, cuisine, streetAddress, locality, postalCode, countryName, addressFull, tel, attractionType) values (N" & _ FormatSqlParam(matchStn1) & ",N" & _ FormatSqlParam(matchstn9) & ",N" & _ FormatSqlParam(matchstn2) & ",N" & _ FormatSqlParam(matchstn3) & ",N" & _ FormatSqlParam(matchstn4) & ",N" & _ FormatSqlParam(matchstn5) & ",N" & _ FormatSqlParam(matchstn10) & ",N" & _ FormatSqlParam(matchstn6) & ",N" & _ FormatSqlParam(matchstn7) & ")" Dim objCommand1 As New SqlCommand(strSQL1, conn) objCommand1.ExecuteNonQuery() Next mIdx4 = mIdx4 + 1 Next Dim re6 As Regex = New Regex("<span class=""tel""[^>]*>[\s\S]+?</span>") Dim mc6 As MatchCollection = re6.Matches(sourcestring) Dim mIdx6 As Integer = 0 For Each m As Match In mc6 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn6 = m.Groups(groupIdx).Value matchstn6 = R.Replace(matchstn6, " ") matchstn6 = matchstn6.Trim() Next mIdx6 = mIdx6 + 1 Next Dim re7 As Regex = New Regex("<div><b>Attraction type:[^>]*>[\s\S]+?</div>") Dim mc7 As MatchCollection = re7.Matches(sourcestring) Dim mIdx7 As Integer = 0 For Each m As Match In mc7 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn7 = m.Groups(groupIdx).Value matchstn7 = R.Replace(matchstn7, " ") matchstn7 = matchstn7.Trim() Next mIdx7 = mIdx7 + 1 Next Dim re8 As Regex = New Regex("(?=<p id).*(?<=</p>)") Dim mc8 As MatchCollection = re8.Matches(sourcestring) Dim mIdx8 As Integer = 0 For Each m As Match In mc8 For groupIdx As Integer = 0 To m.Groups.Count - 1 matchstn8 = m.Groups(groupIdx).Value matchstn8 = R.Replace(matchstn8, " ") matchstn8 = matchstn8.Trim() Dim strSQL2 As String = "insert into feedBackRestaurant (feedBackView) values(N" + FormatSqlParam(matchstn8) + ")" Dim objCommand2 As New SqlCommand(strSQL2, conn) objCommand2.ExecuteNonQuery() Next mIdx8 = mIdx8 + 1 Next objStreamReader.Close() conn.Close() End Sub Public Function FormatSqlParam(ByVal strParam As String) As String Dim newParamFormat As String If strParam = String.Empty Then newParamFormat = "'" & "NA" & "'" Else newParamFormat = strParam.Trim() newParamFormat = "'" & newParamFormat.Replace("'", "''") & "'" End If Return newParamFormat End Function End Module ---problems-- problem that i face are 1. the database foreign key is not working here..someone told me that need some codes to be added..but i dunno how. 2. the data repeats as i run the application. i guest it require update database function.but i hv no idea how. 3. i have to add in multithreading function as well..and last, how to make my application is flexible eventhough the HTML code changes..can anyone help me??plzzz website that i need to extract is http://www.tripadvisor.com/Tourism-g293951-Malaysia-Vacations.html i need the information about hotel, restaurant and attraction place..plzz..i need some help here..

  Read the article

• ASP.NET Membership ChangePassword control - Need to check for previous password

  - by Steve

  Hi guys, I have a new table that hold old passwords, I need to check if there is a match. If there is a match I need the ChangePassword contol to NOT change the password. I need to tell the user that this password was used and pic a new one. I can't seem to be able to interrupt the control from changing the password. Maybe I am using the wrong event. Here is a piece of my code, or how I wish it would work. I appreciate all your help. protected void ChangePassword1_ChangedPassword(object sender, EventArgs e) { MembershipUser user = Membership.GetUser(); string usrName = ""; if (user != null) { string connStr = ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString; SqlConnection mySqlConnection = new SqlConnection(connStr); SqlCommand mySqlCommand = mySqlConnection.CreateCommand(); mySqlCommand.CommandText = "Select UserName from OldPasswords where UserName = 'test'"; mySqlConnection.Open(); SqlDataReader mySqlDataReader = mySqlCommand.ExecuteReader(CommandBehavior.Default); while (mySqlDataReader.Read()) { usrName = mySqlDataReader["UserName"].ToString(); if (usrName == user.ToString()) { Label1.Text = "Match"; } else { Label1.Text = "NO Match!"; } }

  Read the article

• WDK build-process hooks: need incremental build with auto-versioning

  - by Mystagogue

  I've previously gotten incremental builds with auto-versioning working in a team build setting for user-mode code, but now I'm dealing with the builds of WDK device drivers. It's a whole new ball-game. I need to know what extension point, or hook, is available in the WDK build that occurs after the driver has been selected to be incrementally built, but before it actually starts building the object files. More specifically, I have a .rc file that contains the version of the device driver. I need to update the version in that file ONLY IF the driver is going to be built anyway. If I bump the value in the .rc file prematurely, it will cause the incremental build to kick-off (that is bad). If I wait too long, then the incremental build won't see that I've changed the .rc file. Either way, I do need the WDK to realize that the new version I've placed into the .rc file needs to be built into a new .res file and linked. How do I do this? What suggested extension points should I play with? Is there a link-tutorial on the WDK build process that is particularly revealing regarding this topic?

  Read the article

• Help with php code - need to add condition to make one link https

  - by Kaskade

  Hi, I have a wordpress blog and I need to make one of the pages secure. I have been told to make the link to that page point to https://claimpage.html as opposed to http://claimpage.html. The problem is I don't actually create the menu that links the user to the individual pages. This is done automatically by the code in the background. I think I need to put in some sort of an IF statement, saying, if the title of the page is "claim now" then use https otherwise use http. I found this code in the header.php so I think my changes need to go in here but I'm not really sure what to do. <div id="navbar"> <ul class="menu"> <li class="<?php if ( is_home() ) { ?>current_page_item<?php } else { ?>page_item<?php } ?>"><a href="<?php echo get_settings('home'); ?>"><?php _e('Home'); ?></a></li> <?php wp_list_pages('sort_column=id&depth=1&title_li='); ?> <?php wp_register('<li>','</li>'); ?> </ul> </div> <!-- end of #navbar --> Any suggestions as to how I can make one page that I know the title and url or https while the others are kept using normal http? The site is hosted on a secure server so I do have an ssl certificate.

  Read the article

• Need some advice on Core Data modeling strategy

  - by Andy

  I'm working on an iPhone app and need a little advice on modeling the Core Data schema. My idea is a utility that allows the user to speed-dial their contacts using user-created rules based on the time of day. In other words, I would tell the app that my wife is commuting from 6am to 7am, at work from 7am to 4pm, commuting from 4pm to 5pm, and home from 5pm to 6am, Monday through Friday. Then, when I tap her name in my app, it would select the number to dial based on the current day and time. I have the user interface nearly complete (thanks in no small part to help I've received here), but now I've got some questions regarding the persistent store. The user can select start- and stop-times in 5-minute increments. This means there are 2,016 possible "time slots" in week (7 days * 24 hours * 12 5-minute intervals per hour). I see a few options for setting this up. Option #1: One array of time slots, with 2,016 entries. Each entry would be a dictionary containing a contact identifier and an associated phone number to dial. I think this means I'd need a "Contact" entity to store the contact information, and a "TimeSlot" entity for each of the 2,016 possible time slots. Option #2: Each Contact has its own array of time slots, each with 2,016 entries. Each array entry would simply be a string indicating which phone number to dial. Option #3: Each Contact has a dictionary of time slots. An entry would only be added to the dictionary for time slots with an active rule. If a search for, say, time slot 1,299 (Friday 12:15pm) didn't find a key @"1299" in the dictionary, then a default number would be dialed instead. I'm not sure any of these is the "right" way or the "best" way. I'm not even sure I need to use Core Data to manage it; maybe just saving arrays would be simpler. Any input you can offer would be appreciated.

  Read the article

• Need a code snippet for backward paging...

  - by Ali

  Hi guys I'm in a bit on a fix here. I know how easy it is to build simple pagination links for dynamic pages whereby you can navigate between partial sets of records from sql queries. However the situation I have is as below: COnsider that I wish to paginate between records listed in a flat file - I have no problem with the retrieval and even the pagination assuming that the flat file is a csv file with the first field as an id and new reocrds on new lines. However I need to make a pagination system which paginates backwards i.e I want the LAST entry in the file to appear as the first as so forth. Since I don't have the power of sql to help me here I'm kinda stuck - all I have is a fixed sequence which needs to be paginated, also note that the id mentioned as first field is not necessarily numeric so forget about sorting by numerics here. I basically need a way to loop through the file but backwards and paginate it as such. How can I do that - I'm working in php - I just need the code to loop through and paginate i.e how to tell which is the offset and which is the current page etc.

  Read the article

• Need variable width negative lookbehind replacement

  - by Technoh

  I have looked at many questions here (and many more websites) and some provided hints but none gave me a definitive answer. I know regular expressions but I am far from being a guru. This particular question deals with regex in PHP. I need to locate words in a text that are not surrounded by a hyperlink of a given class. For example, I might have This <a href="blabblah" class="no_check">elephant</a> is green and this elephant is blue while this <a href="blahblah">elephant</a> is red. I would need to match against the second and third elephants but not the first (identified by test class "no_check"). Note that there could more attributes than just href and class within hyperlinks. I came up with ((?<!<a .*class="no_check".*>)\belephant\b) which works beautifully in regex test software but not in PHP. Any help is greatly appreciated. If you cannot provide a regular expression but can find some sort of PHP code logic that would circumvent the need for it, I would be equally grateful.

  Read the article

• Need help with WCF design

  - by Jason

  I have been tasked with creating a set of web services. We are a Microsoft shop, so I will be using WCF for this project. There is an interesting design consideration that I haven't been able to figure out a solution for yet. I'll try to explain it with an example: My WCF service exposes a method named Foo(). 10 different users call Foo() at roughly the same time. I have 5 special resources called R1, R2, R3, R4, and R5. We don't really need to know what the resource is, other than the fact that a particular resource can only be in use by one caller at a time. Foo() is responsible to performing an action using one of these special resources. So, in a round-robin fashion, Foo() needs to find a resource that is not in use. If no resources are available, it must wait for one to be freed up. At first, this seems like an easy task. I could maybe create a singleton that keeps track of which resources are currently in use. The big problem is the fact that I need this solution to be viable in a web farm scenario. I'm sure there is a good solution to this problem, but I've just never run across this scenario before. I need some sort of resource tracker / provider that can be shared between multiple WCF hosts. Any ideas from the architects out there would be greatly appreciated!

  Read the article

• Need a piece of advice about e-mail automation in ms exchange + ms office environment

  - by be here now

  Hi, guys. I need your help in the following simple situation. I've got an MS Exchange server and some client computers running on XP with Office 2003 installed. And I've got a process I need to automate. Twice a day a known list of people sends an e-mail to a certain mailbox (let's call it manager's mailbox) - basically, an accomplishment report. After recieving letters from all of these people the mailbox owner sends and e-mail to another mailbox, meaning that a certain process is done. What I need to do is to replace this manager's mailbox with a depersonalized mailbox that will accumulate all the reports and automatically send a message after collecting all of them. I am definitely not in a "oh my God, what shold I do?" situation, and currently my imagination shows me a couple of ways to solve this problem, which I'm going to try, and I'm not ascking for a ready solution. But since I'm not experienced in Office/VBA developement, I'd like to ask a corresponding pro's opinion. Can you point me to a right direction from the best practices' point of view?

  Read the article

• I need a fast runtime expression parser

  - by Chris Lively

  I need to locate a fast, lightweight expression parser. Ideally I want to pass it a list of name/value pairs (e.g. variables) and a string containing the expression to evaluate. All I need back from it is a true/false value. The types of expressions should be along the lines of: varA == "xyz" and varB==123 Basically, just a simple logic engine whose expression is provided at runtime. UPDATE At minimum it needs to support ==, !=, , =, <, <= Regarding speed, I expect roughly 5 expressions to be executed per request. We'll see somewhere in the vicinity of 100/requests a second. Our current pages tend to execute in under 50ms. Usually there will only be 2 or 3 variables involved in any expression. However, I'll need to load approximately 30 into the parser prior to execution. UPDATE 2012/11/5 Update about performance. We implemented nCalc nearly 2 years ago. Since then we've expanded it's use such that we average 40+ expressions covering 300+ variables on post backs. There are now thousands of post backs occurring per second with absolutely zero performance degradation. We've also extended it to include a handful of additional functions, again with no performance loss. In short, nCalc met all of our needs and exceeded our expectations.

  Read the article

• Do I need to using locking against integers in c++ threads

  - by Shane MacLaughlin

  The title says it all really. If I am accessing a single integer type (e.g. long, int, bool, etc...) in multiple threads, do I need to use a synchronisation mechanism such as a mutex to lock them. My understanding is that as atomic types, I don't need to lock access to a single thread, but I see a lot of code out there that does use locking. Profiling such code shows that there is a significant performance hit for using locks, so I'd rather not. So if the item I'm accessing corresponds to a bus width integer (e.g. 4 bytes on a 32 bit processor) do I need to lock access to it when it is being used across multiple threads? Put another way, if thread A is writing to integer variable X at the same time as thread B is reading from the same variable, is it possible that thread B could end up a few bytes of the previous value mixed in with a few bytes of the value being written? Is this architecture dependent, e.g. ok for 4 byte integers on 32 bit systems but unsafe on 8 byte integers on 64 bit systems? Edit: Just saw this related post which helps a fair bit.

  Read the article

• Write file need to optimised for heavy traffic part 2

  - by Clayton Leung

  For anyone interest to see where I come from you can refer to part 1, but it is not necessary. write file need to optimised for heavy traffic Below is a snippet of code I have written to capture some financial tick data from the broker API. The code will run without error. I need to optimize the code, because in peak hours the zf_TickEvent method will be call more than 10000 times a second. I use a memorystream to hold the data until it reaches a certain size, then I output it into a text file. The broker API is only single threaded. void zf_TickEvent(object sender, ZenFire.TickEventArgs e) { outputString = string.Format("{0},{1},{2},{3},{4}\r\n", e.TimeStamp.ToString(timeFmt), e.Product.ToString(), Enum.GetName(typeof(ZenFire.TickType), e.Type), e.Price, e.Volume); fillBuffer(outputString); } public class memoryStreamClass { public static MemoryStream ms = new MemoryStream(); } void fillBuffer(string outputString) { byte[] outputByte = Encoding.ASCII.GetBytes(outputString); memoryStreamClass.ms.Write(outputByte, 0, outputByte.Length); if (memoryStreamClass.ms.Length > 8192) { emptyBuffer(memoryStreamClass.ms); memoryStreamClass.ms.SetLength(0); memoryStreamClass.ms.Position = 0; } } void emptyBuffer(MemoryStream ms) { FileStream outStream = new FileStream("c:\\test.txt", FileMode.Append); ms.WriteTo(outStream); outStream.Flush(); outStream.Close(); } Question: Any suggestion to make this even faster? I will try to vary the buffer length but in terms of code structure, is this (almost) the fastest? When memorystream is filled up and I am emptying it to the file, what would happen to the new data coming in? Do I need to implement a second buffer to hold that data while I am emptying my first buffer? Or is c# smart enough to figure it out? Thanks for any advice

  Read the article

• Need a set based solution to group rows

  - by KM

  I need to group a set of rows based on the Category column, and also limit the combined rows based on the SUM(Number) column to be less than or equal to the @Limit value. For each distinct Category column I need to identify "buckets" that are <=@limit. If the SUM(Number) of all the rows for a Category column are <=@Limit then there will be only 1 bucket for that Category value (like 'CCCC' in the sample data). However if the SUM(Number)@limit, then there will be multiple bucket rows for that Category value (like 'AAAA' in the sample data), and each bucket must be <=@Limit. There can be as many buckets as necessary. Also, look at Category value 'DDDD', its one row is greater than @Limit all by itself, and gets split into two rows in the result set. Given this simplified data: DECLARE @Detail table (DetailID int primary key, Category char(4), Number int) SET NOCOUNT ON INSERT @Detail VALUES ( 1, 'AAAA',100) INSERT @Detail VALUES ( 2, 'AAAA', 50) INSERT @Detail VALUES ( 3, 'AAAA',300) INSERT @Detail VALUES ( 4, 'AAAA',200) INSERT @Detail VALUES ( 5, 'BBBB',500) INSERT @Detail VALUES ( 6, 'CCCC',200) INSERT @Detail VALUES ( 7, 'CCCC',100) INSERT @Detail VALUES ( 8, 'CCCC', 50) INSERT @Detail VALUES ( 9, 'DDDD',800) INSERT @Detail VALUES (10, 'EEEE',100) SET NOCOUNT OFF DECLARE @Limit int SET @Limit=500 I need one of these result set: DetailID Bucket | DetailID Category Bucket -------- ------ | -------- -------- ------ 1 1 | 1 'AAAA' 1 2 1 | 2 'AAAA' 1 3 1 | 3 'AAAA' 1 4 2 | 4 'AAAA' 2 5 3 OR 5 'BBBB' 1 6 4 | 6 'CCCC' 1 7 4 | 7 'CCCC' 1 8 4 | 8 'CCCC' 1 9 5 | 9 'DDDD' 1 9 6 | 9 'DDDD' 2 10 7 | 10 'EEEE' 1

  Read the article

• Mysql query, need suggestion or solution

  - by Xi Kam

  Can anyone help me, i have two tables and i need records from both the table //////////////////////////////++ Query 1 ++//////////////////////////////////// SELECT SUM(rec_issued) AS issed, regen_id, YEAR(issue_date) AS iYear, MONTH(issue_date) AS iMonth FROM `view_rec_issued` WHERE `regen_id` = 2 GROUP BY YEAR(issue_date) DESC, MONTH(issue_date) DESC ORDER BY issue_date ASC issed regen_id iYear iMonth 424 2 2011 3 4340 2 2011 4 4235 2 2011 5 10570 2 2012 2 4761 2 2012 3 5000 2 2012 4 3700 2 2012 5 3414 2 2012 6 3700 2 2012 7 2992 2 2012 8 995 2 2012 10 ![Result from Query 1][1] //////////////////////////////++ Query 2 ++//////////////////////////////////// SELECT SUM(total_redem) AS redemed, regen_id, YEAR(redemption_date) AS rYear, MONTH(redemption_date) AS rMonth FROM `recredem_month_wise` WHERE `regen_id` = 2 GROUP BY YEAR(redemption_date) DESC, MONTH(redemption_date) DESC order by redemption_date ASC redemed regen_id rYear rMonth 424 2 2011 3 260 2 2011 4 6523 2 2011 5 1070 2 2011 6 200 2 2011 10 500 2 2011 11 9750 2 2012 2 5000 2 2012 3 5500 2 2012 4 3803 2 2012 5 3700 2 2012 7 3000 2 2012 8 ![Result from Query 2][2] But i want it as - issed regen_id iYear iMonth redemed regen_id rYear rMonth 424 2 2011 3 424 2 2011 3 4340 2 2011 4 260 2 2011 4 4235 2 2011 5 6523 2 2011 5 NULL NULL NULL NULL 1070 2 2011 6 NULL NULL NULL NULL 200 2 2011 10 NULL NULL NULL NULL 500 2 2011 11 10570 2 2012 2 9750 2 2012 2 4761 2 2012 3 5000 2 2012 3 5000 2 2012 4 5500 2 2012 4 3700 2 2012 5 3803 2 2012 5 3414 2 2012 6 NULL NULL NULL NULL 3700 2 2012 7 3700 2 2012 7 2992 2 2012 8 3000 2 2012 8 995 2 2012 10 NULL NULL NULL NULL ![I want this output][3] In these table regen_id is unique and i need data as YEAR and MONTH, if in any table not have the records in perticular month and year it should retrieve zero or null. But in every record year and month should equal like this - iYear = rYear and iMonth = rMonth So we can merge both the fields - No need to show year and month twice iYear and rYear = year iMonth and rMonth = month Thank You Please look at this problem.

  Read the article

• Need access to views on the OnSeekBarChangeListener (which is in an own class)

  - by sandkasten

  first of all I hope you understand my english because I'am not a native speaker. Okay, I'am new to android development and try following: For my app I need a SeekBar, so I create a Seekbar via XML and implement an OnSeekBarChangeListener. In the compay I work for its forbidden (because of the styleguid) to create something like this: seekbar.setOnSeekBarChangeListener(new OnSeekBarChangeListener() { @Override public void onProgressChanged(SeekBar arg0, int arg1, boolean arg2) { /// Do something } ... }); So I need to create a own class for the OnSeekBarChangeListener. So far no problem. public class SeekBarChangeListener extends SeekBar implements SeekBar.OnSeekBarChangeListener { public SeekBarChangeListener(Context context) { super(context); } public void onProgressChanged(SeekBar seekBar, int progress, boolean fromUser) { } public void onStartTrackingTouch(SeekBar seekBar) { } public void onStopTrackingTouch(SeekBar seekBar) { /// Do something. Following Code wont work CheckBox RemeberUsername = (CheckBox)findViewById(R.id.RemeberUsername); /// Always gets NULL } } I need a way to get access to some controls. Normaly the findViewById works fine but not in this case (what I can totaly understand, because how should the listender know about the views?). Some good hints? Or is there no oter way like the first code snippet to get the controls? Hope someone can help me out.

  Read the article

• Bug Triage

  In this blog post brain dump, I'll attempt to describe the process my team tries to follow when dealing with new bug reports (specifically, code defect reports). This is not official Microsoft policy, just the way we do things… if you do things differently and want to share, you can do so at the bottom in the comments (or on your blog).Feature Triage TeamA subset of the feature crew, the triage team (which has representations from the PM, Dev and QA disciplines), looks at all unassigned bugs at regular intervals. This can be weekly or daily (or other frequency) dependent on which part of the product cycle we are in and what the untriaged bug load looks like. They discuss each bug considering the evidence and make a decision of whether the bug goes from Not Yet Assigned to Assigned (plus the name of the DEV to fix this) or whether it goes from Active to Resolved (which means it gets assigned back to the requestor for closure or further debate if they were not present at the triage meeting). Close to critical milestones, the feature triage team needs to further justify bugs they take to additional higher-level triage teams.Bug Opened = Not Yet AssignedSomeone (typically an SDET from the QA team) creates the bug item (e.g. in TFS), ensuring they populate all the relevant fields including: Title, Description, Repro Steps (including the Actual Result at the end of the steps), attachments of code and/or screenshots, Build number that they observed the issue in, regression details if applicable, how it was found, if a test case exists or needs to be created etc. They also indicate their opinion on the Priority and Severity. The bug status is left as Not Yet Assigned."Issue" versus "Fix for issue"The solution to some bugs is easy to determine, e.g. "bug: the column name is misspelled". Obviously the fix is to correct the spelling – still, the triage team should be explicit and enter the correct spelling in the bug's Description. Note that a bad bug name here would be "bug: fix the spelling of the column" (it describes the solution, rather than the problem).Other solutions are trickier to establish, e.g. "bug: the column header is not accessible (can only be clicked on with the mouse, not reached via keyboard)". What is the correct solution here? The last thing to do is leave this undetermined and just assign it to a developer. The solution has to be entered in the description. Behind this type of a bug usually hides a spec defect or a new feature request.The person opening the bug should focus on describing the issue, rather than the solution. The person indicates what the fix is in their opinion by stating the Expected Result (immediately after stating the Actual Result). If they have a complex suggested solution, that should be split out in a separate part, but the triage team has the final say before assigning it. If the solution is lengthy/complicated to describe, the bug can be assigned to the PM. Note: the strict interpretation suggests that any bug with no clear, obvious solution is always a hole in the spec and should always go to the PM. This also ensures the spec gets updated.Not Yet Assigned - Not Yet Assigned (on someone else's plate)If the bug is observed in our feature, but the cause is actually another team, we change the Area Path (which is the way we identify teams in TFS) and leave it as Not Yet Assigned. The triage team may add more comments as appropriate including potentially changing the repro steps. In some cases, we may even resolve the bug in our area path and open a new bug in the area path of the other team.Even though there is no action on a dev on the team, the bug still needs to be tracked. One way of doing this is to implement some notification system that informs the team when the tracked bug changed status; another way is to occasionally run a global query (against all area paths) for bugs that have been opened by a member of the team and follow up with the current owners for stale bugs.Not Yet Assigned - ResolvedThis state transition can only be made by the Feature Triage Team.0. Sometimes the bug description is not clear and in that case it gets Resolved as More Information Needed, so the original requestor can provide it.After understanding what the bug item is about, the first decision is to determine whether it needs to go to a dev.1. If it is a known bug, it gets resolved as "Duplicate" and linked to the existing bug.2. If it is "By Design" it gets resolved as such, indicating that the triage team does not think this is a bug.3. If the bug does not repro on latest bits, it is resolved as "No Repro"4. The most painful: If it is decided that we cannot fix it for this release it gets resolved as "Postponed" or "Won't Fix". The former is typically due to resources and time constraints, while the latter is due to deciding that it is not important enough to consume our resources in any release (yes, not all bugs must be fixed!). For both cases, there are other factors that contribute to the decision such as: existence of a reasonable workaround, frequency we expect users to encounter the issue, dependencies on other team to offer a solution, whether it breaks a core scenario, whether it prohibits customer feedback on a major feature, is it a regression from a previous release, impact of the fix on other partner teams (e.g. User Education, User Experience, Localization/Globalization), whether this is the right fix, does the fix impact performance goals, and last but not least, severity of bug (e.g. loss of customer data, security threat, crash, hang). The bar for fixing a bug goes up as the release date approaches. The triage team becomes hardnosed about which bugs to take, while the developers are busy resolving assigned bugs thus everyone drives for Zero Bug Bounce (ZBB). ZBB is when you have 0 active bugs older than 48 hours.Not Yet Assigned - AssignedIf the bug is something we decide to fix in this release and the solution is known, then it is assigned to a DEV. This is either the developer that will do the work, or a Lead that can further assign it to one of his developer team based on a load balancing algorithm of their choosing.Sometimes, the triage team needs the dev to do some investigation work before deciding whether to take the fix; similarly, the checkin for the fix may be gated on code review by the triage team. In these cases, these instructions are provided in the comments section of the bug and when the developer is done they notify the triage team for final decision.Additionally, a Priority and Severity (from 0 to 4) has to be entered, e.g. a P0 means "drop anything you are doing and fix this now" whereas a P4 is something you get to after all P0,1,2,3 bugs are fixed.From a testing perspective, if the bug was found through ad-hoc testing or an external team, the decision is made whether test cases should be added to avoid future regressions. This is communicated to the QA team.Assigned - ResolvedWhen the developer receives the bug (they should be checking daily for new bugs on their plate looking at bugs in order of priority and from older to newer) they can send it back to triage if the information is not clear. Otherwise, they investigate the bug, setting the Sub Status to "Investigating"; if they cannot make progress, they set the Sub Status to "Blocked" and discuss this with triage or whoever else can help them get unblocked. Once they are unblocked, they set the Sub Status to "Working on Solution"; once they are code complete they send a code review request, setting the Sub Status to "Fix Available". After the iterative code review process is over and everyone is happy with the fix, the developer checks it in and changes the state of the bug from Active (and Assigned to them) to Resolved (and Assigned to someone else).The developer needs to ensure that when the status is changed to Resolved that it is assigned to a QA person. For example, maybe the PM opened the bug, but it should be a QA person that will verify the fix - the developer needs to manually change the assignee in that case. Typically the QA person will send an email to the original requestor notifying them that the fix is verified.Resolved - ??In all cases above, note that the final state was Resolved. What happens after that? The final step should be Closed. The bug is closed once the QA person verifying the fix is happy with it. If the person is not happy, then they change the state from Resolved to Active, thus sending it back to the developer. If the developer and QA person cannot reach agreement, then triage can be brought into it. An easy way to do that is change the status back to Not Yet Assigned with appropriate comments so the triage team can re-review.It is important to note that only QA can close a bug. That means that if the opener of the bug was a PM, when the bug gets resolved by the dev it may land on the PM's plate and after a quick review, the PM would re-assign to an SDET, which is the only role that can close bugs. One exception to this is if the person that filed the bug is external: in that case, we leave it Resolved and assigned to them and also send them a notification that they need to verify the fix. Another exception is if specialized developer knowledge is needed for verifying the bug fix (e.g. it was a refactoring suggestion bug typically not observable by the user) in which case it is fine to have a developer verify the fix, and ideally a different developer to the one that opened the bug.Other links on bug triageA quick search reveals that others have talked about this subject, e.g. here, here, here, here and here.Your take?If you have other best practices your team uses to deal with incoming bug reports, feel free to share in the comments below or on your blog. Comments about this post welcome at the original blog.

  Read the article

• What is the way to submit a patch to fix all the damage that LP: #600941 causes?

  - by nutznboltz

  What is the best way to submit a patch to fix all the damage that LP: #600941 causes? I ask because LP: #600941 was put into every version of Ubuntu still supported at this time. Should I pick a particular version and run ubuntu-bug on it? Should that version be the LTS or Oneiric or Precise (how can I get Precise if I need it?) The story is that after it was pushed out all of our systems started experiencing Nagios nrpe restart failures. Commands like /etc/init.d/nagios-nrpe-server restart would cause nrpe to stop but not restart. I tracked this down to the way that the /etc/init.d/nagios-nrpe-server script is calling start-stop-daemon. The issue is that the "stop" stanza in the /etc/init.d/nagios-nrpe-server script first calls start-stop-daemon which sends SIGTERM to nrpe and then waits only for one second. If nrpe has not exited by that time the pid file will still exist and the /etc/init.d/nagios-nrpe-server script will remove it. Worse if /etc/init.d/nagios-nrpe-server restart is used not only will the pid file be removed, the attempt to restart nrpe will fail provided that the nrpe daemon is still tardy in shutting down. The attempt to start under those circumstances will fail because nrpe will still be bound to a socket and the second attempt at binding will cause the nrpe startup to abort. They should have wondered why there was a comment about "sometimes the pid file does not get removed". They should have tested on systems that have a heavy load and therefore slow nrpe response times. The fix is to add --retry 10 or such to the invocation of start-stop-daemon ... --stop ... Thanks

  Read the article

• How do I fix a garbled screen on a Gateway LT3103u?

  - by paracaudex

  I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >