Search Results

Search found 21455 results on 859 pages for 'setup exe'.

Page 58/859 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Slowdown upon router/modem setup change

    - by Ollie Saunders
    I’ve been using a Belkin FSD7632-4 modem router to connect to my TalkTalk provided ADSL internet connection for some time and been pretty happy with it. Recently, however, the connection has been failing and I decided to get a ASUS RT-N16 instead, which is also a much more capable router generally. The ASUS RT-N16 doesn’t come with a modem built-in so I purchased as Zoom modem as well. I’ve set them both up and am using them to post this message. But I’m a bit miffed to find that I get a significantly and consistently slower downstream rate from the new configuration than with the old Belkin. Belkin modem router: downstream: 3.45 mbps upstream: 0.73 mbps ASUS router + Zoom modem: downstream: 2.71 mbps upstream: 0.66 mbps Any ideas why this is? The really weird thing about this is that the Zoom supports ADSL2 and ADSL2+ but I don’t think the old Belkin does. At first I thought it might be due to the Zoom modem being limited to PPPoE instead of PPPoA, which my ISP supports, but then I tried using PPPoE with the Belkin and that still gave a high speed. I’m using VC-Mux encapsulation with both. VPI of 0 and VCI of 38. I pulled this data off the Zoom: Mode: ADSL2 Line Coding: Trellis On Status: No Defect Link Power State: L0 Downstream Upstream SNR Margin (dB): 12.3 11.8 Attenuation (dB): 43.0 24.9 Output Power (dBm): 12.9 0.0 Attainable Rate (Kbps): 3936 844 Rate (Kbps): 3194 840 MSGc (number of bytes in overhead channel message): 59 10 B (number of bytes in Mux Data Frame): 99 14 M (number of Mux Data Frames in FEC Data Frame): 2 16 T (Mux Data Frames over sync bytes): 1 8 R (number of check bytes in FEC Data Frame): 8 8 S (ratio of FEC over PMD Data Frame length): 1.9833 9.0594 L (number of bits in PMD Data Frame): 839 219 D (interleaver depth): 32 2 Delay (msec): 15 4 Super Frames: 15808 14078 Super Frame Errors: 0 4294967232 RS Words: 513778 111753 RS Correctable Errors: 126 4294967238 RS Uncorrectable Errors: 0 N/A HEC Errors: 0 4294967279 OCD Errors: 0 0 LCD Errors: 0 0 Total Cells: 1920175 237597 Data Cells: 205993 392 Bit Errors: 0 0 Total ES: 0 0 Total SES: 0 0 Total UAS: 34 0

    Read the article

  • How to setup NS for a subdomain

    - by DK M
    Hello, I have a DomainA.com use : ns1.mydomain.com ns2.mydomain.com I want create subdomain myname.domainA.com and use NS of other Server ns1.godaddy.com ns2.godaddy.com for that sub, please help, how to config in my NS ? I use Blind.

    Read the article

  • issues with Nginx + Passenger Production setup - Loading time/request time delay

    - by Dani Cela
    having a bit of an issue relating to request time. I have NGINX as a proxy server for a ruby on rails app running passenger. I also have a postgresql database server which is running on its own VM separate from my nginx/application server. My issue is that when I try and access my products page which does a lot of database queries, my query takes maybe 3-4 seconds. The second I flood the web server with requests, i will choke out the web server and have requests take almost 20-30 seconds to process. The rails server and database server do not crash, and the usage is not that high. Each server has more than enough memory, even cpu usage on the rails server isn't more than 85%, albeit thats high but its not maxing it out. Is my problem related to my nginx proxy server? I dont really know how to fully explain this so if you have a question please ask it and I can clarify what I mean. EDIT: to see exactly what i mean relating to the database query, see http://207.245.4.215/products

    Read the article

  • How to setup NTFS ACL with Acces Based Enumeration

    - by Patrick Pellegrino
    We're in the process of migrating from Novell Netware to Windows 2K8 R2 infrastructure (AD, File server, print server... etc) My question is about ACL. While Netware and Windows are totally different, I want to be sure my thnking is good before screwing everything up! There's a scenario : F: | +-- DATA <= Shared as DATA with Access based enumeration | +-- Folder 1 +-- Team 1's Folder +-- Team 2's Folder ... In that case, by default, rights are herited from the F: to the deepest folders. What we want : Administrators group have full control top - down. From DATA, ABE list only folders that users have access. (ex. : I'm in group Team 2, I see Team 2's Folder). From what I understand, at DATA I remove all NTFS ACL to be herited (ex. Users Group), be sure to keep Administrators Group and SYSTEM user. After that, grant Full control (or any right needed) on each folder to Groups or Users that have to have access. Does I'm wrong ? Anything I should take care of ? Any help to my understanding will be very appreciated. Regards.

    Read the article

  • ATI Radeon Triple Monitor Setup

    - by Zak
    I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

    Read the article

  • Setup my domain at Whois.com as nameservers for a Dedicated Server with Kloxo

    - by BoDiE2003
    Hello, this is my first time at ServerFault, I'm a stackoverflow user. I'm faceing the next problem and may be its me, but I can't find proper guides to set up a domain and nameservers for a dedicated box. I have a domain, at whois.com, and a Dedicated server at Reliable Hosting Services, the server has 5 IPs, I know that I need 2 of them for the nameservers. Right now, my domain at whois.com is using nsX.whois.com nameservers and it has 2 child nameservers: ns1.mydomain.com & ns2.mydomain.com pointing to those 2 IPs from my Server. Whats next? I still cannot set that domain as my main server domain since it says: To map an IP to a domain, the domain must ping to the same IP, otherwise, the domain will stop working. The domain you are trying to map this IP to, doesn't resolve back to the IP, and so it cannot be set as the default domain for the IP. Well and I'm stuck on those steps, whats next to have my nameservers working and my main domain assigned to my server? Thank you very much and happy new year!!

    Read the article

  • setup dns to redirect all http requests on a specific machine in LAN

    - by mox601
    Hello, i should set up the following configuration with 2 machines: machine A issues HTTP requests machine B serves the pages requested by A For testing purposes, i want that EVERY HTTP request issued by machine A gets served by machine B. For example, machine A browser tries to access www.website.com/article.php?1234 machine B has a folder in its http server that has the content and replies to A. How can I set up a dns on machine B to point ALL requests to itself? Thanks

    Read the article

  • What NAS setup for syncing over the internet?

    - by Jamse
    I have family living a few hours away and have a lot of files that I would like to share - especially lots of folders of digital photos, but also documents etc. - partially so they can see them, partially so I can have access when I visit them and partially for backup / redundancy purposes. My current hard drives on my main machine are getting pretty full anyway, and I have a MythTV box where my music is currently stored, so I was thinking of getting a NAS anyway. And at the other end my family have a few computers, so they would probably benefit from a NAS too. My general idea (though I'm willing to shift on this if there are any bright ideas about other ways of achieving my objectives) is to get a matching pair of NASs and have them sync over the internet. (To cut down on bandwidth use I would get them in sync locally to start with.) Having read around as best I can it seems that syncing over the internet is generally only a feature on quite high end units. However, I have seen that QNAP seem to feature this on their TS-110 and TS-210 units, which might work (they call it "remote replication"). They seem pretty reasonably priced for what they are, but of course with buying 2 of them and then adding the drives (say 1TB or 2TB each) I'd be looking at about £400 total. So, I'm looking for recommendations really. I don't want to spend more than the QNAPs would cost me, but any other ideas would be most appreciated. I am comfortable with technology and tinkering around, but I don't have as much time for that as I would like, so I guess I would favour solutions that require less tinkering rather than more (even though that's less fun!). Any thoughts would be welcome, as would any comments from people who have used the QNAP boxes for this. Thanks in advance. Some specifications: Two-way syncing. Changes made at either end should be synced to the other. There shouldn't be one unit that is effectively a read-only mirror of the other. Not real time. The syncing doesn't need to be real time - if it updated, say, daily overnight that would be fine. Set and forget. I would prefer minimal user interaction once set up - it would be great if syncs were scheduled and automatic. OS independence. I am running Windows XP plus an Ubuntu-based MythTV box. At the other end there are Windows 7 and Windows XP machines, plus a networked TV set top box which I think can play files off the network. Machine independence. I would favour a system that is self-contained, i.e. not reliant on any particular PC being switched on. If the system had enough else going for it I could perhaps work around it at this end, where I only have one PC that's used as such, but it would be harder at the other where there are at least two PCs that might be accessing the files. Notifications. I guess things like getting an email notification if the syncing fell over for any reason would be useful, though it's not a deal breaker.

    Read the article

  • kloxo setup error

    - by ron
    Hi, i've just purchased vps from 2host, its unmanaged. the support told me to install kloxo. However i got the ff errors in step 1: --begin-- root@vpshostingtips:~# wget http:// download.lxlabs . com/download/kloxo/production/kloxo-install-master.sh --2010-05-06 04:17:04-- http:// download.lxlabs . com/download/kloxo/production/kloxo-inst all-master.sh Resolving download.lxlabs.com... failed: Temporary failure in name resolution. wget: unable to resolve host address `download.lxlabs.com' root@vpshostingtips:~# --end-- Note: i split the hyperlinks intentionally to post here can somebody tell me whats the reason for error? sorry so new to vps.

    Read the article

  • Windows 7 dual monitor setup: Wallpaper alignment

    - by Tomalak
    I have the following dual-screen set up on my Windows 7 PC: [2][1], that means my secondary monitor is on the right side of my primary monitor. Now I have a dual-screen wallpaper that should stretch across the monitors. I have set it to "Tile" mode. Problem: The wallpaper invariably starts at [1] (left edge of the image being on the left edge of [1]), and then continues on [2]. It basically splits the wrong way, producing a rather awkward look. How can I make the wallpaper appear correctly (i.e. left edge of the image being on the left edge of [2])?

    Read the article

  • Wireless router setup for 1-1 NAT

    - by Carlos
    What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

    Read the article

  • How to setup a virtual machine in Ubuntu desktop to run Debian Server

    - by stickman
    I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

    Read the article

  • Recommend a mail server setup for multiple domains

    - by Greg
    Hi all, I've just set up a new Debian web server which I have done plenty of times before, but I want to add a mail server which I have never done before. I am aware of this question, but I would like someone to recommend packages and briefly explain how to use them for providing pop/imap access on multiple domains, a concept that has confused me for a while. I'm planning for this server to grow slowly but surely, from serving an initial 5 or 6 domains to about 20 in the first year, continuing at this rate. (yes, I've jumped on the cloud bandwaggon). At the moment, I have a DNS-A record pointing to my server's IP and nothing else. I'm assuming that I need a DNS-MX record pointing there too, but I haven't read up about it yet so today that's what I'll be doing. Hopefully reading up on the subject and the help that I get here will get my server up and running in no time. Thanks!

    Read the article

  • how do I setup Apache's Content-Encoding Header?

    - by Nick
    When attempting to validate my site with the W3C validator, it returns the error, "Don't know how to decode Content-Encoding 'none'". Firebug confirms that my server is sending the header, "Content-Encoding: none". But I can't find any directive in apache2.conf or in my vhost that sets the Content-Encoding header. Where does the directive go, and what should it be set to? UPDATE: On further examination it seems something is wrong with mod_deflate (gzip). It's zipping my css files just fine, but is not zipping the html generated by my php scripts. I have: AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css And the pages are showing a mime type of: "text/html". But content encoding is "none" and they aren't zipping. Perhaps these issues are related?

    Read the article

  • Simple vLAN setup

    - by Logan Bissonnette
    I have a basic lab environment set up to try and get 2 vLANs working in hyper-v. I have the following equipment 1 hyper-v server 1 Desktop PC 1 Managed Switch (d-link DES-3052P) 1 cheap router (DI-604) My end goal is to have 1 VM and the desktop on one vLAN with internet, and 1 VM on a separate vLAN with internet access. I am having troubles getting an internet connection to both vLANs. The switch does not have the ability to have asynchronous vLANs. This is my switch configuration Port 1 - Trunk Port - Connected to router Port 2 - Trunk Port - Connected to hyper-v Server Port 3 - Access Port- Connected to Desktop Within hyper-v I have 1 switch and 2 VMs. When the VMs are set up to use vlan ID 1, everything works fine. As soon as a VM is set up to use vlan ID 2, they lose all network connection and cannot communicate with the router anymore. I believe this is because the router is not vLAN aware. Can anyone help me with what settings need to be set up on my switch? I believe I want an egress rule so traffic leaving towards the router is untagged, is that right? If not, any ideas or hints as to what needs to be set up?

    Read the article

  • Exchange 2010 Setup

    - by Hemal
    Hello, I am testing MS exchange 2010 SP1 for our firm. It's new exchnage installation as we don't have any previous versions. I installed Exchange 2010 with SP1 on Windows server 2008 SP2 (64-bit) with typical settings which has 3 server roles: hub transport, mailbox server, client access. But now I got stuck how to finish basic configuaration to get email flow from/to my server. I really appreciate any response to help me with the next steps.. Thank you in advance for any replies, Hemal

    Read the article

  • Setup CENTOS Centralized AUDIT and RSYSLOG server

    - by Warron.French
    Attempting to use these links: Sending audit logs to SYSLOG server or http://wiki.rsyslog.com/index.php/Centralizing_the_audit_log I have been unable to get centralized AUDIT logging to work on my ALL-CentOS network environment. I have 6 workstations dt1...dt6, and the log files are not generated at all and I cannot tell if the messages are being sent from these workstations: dt1..dt6 over to the server (srv1). I have configured the rsyslog.conf on the workstations as shown in the link: Sending audit logs to SYSLOG server, and add the additional touches for generating the logfiles into a separate directory per YEAR/MONTH/DAY (using proper syntax) and into separate HOSTNAME-based_audit.log files. Note: RSYSLOG messaging does appear to work from the workstations over to the server, but the audit logging portion is not working. I am running CentOS-6.5 with RPMs: audit-2.2-4.el6_5.x86_64, audit-libs-2.2-4.el6_5.x86_64, and rsyslog-5.8.10-8.el6.x86_64 I have gotten zero responses from wiki.rsyslog.com and really need this to work. If needed I can send files of one of my workstations and the server to aid in the process. Thanks, Warron

    Read the article

  • How to migrate KVM based VMs running in LVM setup to Vmdk images

    - by Bond
    I am using KVM on Ubuntu Server 10.04. and Virtual Machines are running on it in LVM. I have to migrate some of them to Vmware server.How can I achieve this? I searched and came across some links but they all talked converting vmdk images to qcow or so.In this case I have OS in LVM. I also looked at man page of qemu-img and as I understand it should do what I am asking in this thread. But how exactly should I proceed in this case.Since it is not a file based image (OS running in an LVM which has filesystem in that LVM). So I am not able to understand what should I be doing to achieve the same. Can I achieve the above with snapshots of LVMs rather than shutting down the VM itself.

    Read the article

  • Can't kill process TGitCache.exe

    - by ProfKaos
    Sometimes, I suspect when I open a music folder during the right moon phase and during a leap microsecond, this process crashes and pops up an error reporting dialogue. I decline to report the error, because that also fails by now, and choose Exit. Exit just delays the re-appearance of the error reporting dialogue for about 2 seconds. If I try and kill the process using SysInternals' Process Explorer the process is just restarted, only to crash again. So, I'm pretty sure another process, probably a service because TGitCache doesn't have a parent process and no other Git processes are visible, is keeping tabs on this process and restarting it if it dies. This is cruel and inhuman, but how can I find which nanny process is prolonging the agony?

    Read the article

  • SSL/https setup for herokuapp.com address rather than my actual domain

    - by new2ruby
    I have a subdomain of my site pointed to a rails app at mysite.herokuapp.com. I bought a certificate from godaddy and seem to have that all set up correctly. So that when I go to: http://mysite.herokuapp.com or http://dev.mysite.com it's redirected to: https://mysite.herokuapp.com or https://dev.mysite.com The problem is that when I visit dev.mysite.com, I get the error: Safari can't verify the identity of the website. But when I go to mysite.herokuapp.com, I don't get the error. I wanted this to be set up the other way, so that dev.mysite.com did not cause the error. I'm not sure where I went wrong. I used dev.mysite.com when generating the key and when setting it up at godaddy.com. Any ideas where I should look? P.S. The old site is hosted at dreamhost and the DNS info is stored there as well. So I created a subdomain there of type cname which points to mysite.herokuapp.com.

    Read the article

  • hMailserver: Secure SMTP SetUP - Trusted Cert Issue

    - by Peter
    I'm trying to configure hMailserver with a 3rd party SSL cert. I'v 1) Installed the SSL key & cert 2) Placed the hash named CA and intermediate in to the \externals\cs folder Now, the connection between the mail client and the server is secure and works. The issue is that mail clients outlook, apple mail, others issue an untrusted cert warning. I've followed several threads on the forums, but none seem to solve this problem

    Read the article

  • Multiple Graphics cards - Non Multi-Display Setup

    - by Alan Thomas
    Is it possible for me to utilize the processing capabilities of multiple graphics cards, even if I'm only using one monitor? I recently bought a new AMD graphics card, fairly top of the line. I also have a two year old, decent nVidia card. They're obviously very different cards. I don't really mind for gaming because my current card can handle most games fine by itself. I'm concerned about video editing programs such as Adobe Premiere and After Effects. Would the system be able to utilize the power of both cards to, say, render a video? I have both drivers still installed on my machine. And because there is only one monitor connected to my current graphics card (AMD) the nVidia would be connected to no display. So I am wondering whether it would or could be utilized in some way to help in processing video. Thanks!

    Read the article

  • how to setup kismet.conf on Ubuntu

    - by Registered User
    I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

    Read the article

  • How can I setup nginx to serve virtualhosts with rails(unicorn/passenger) and php-fpm

    - by NewAlexandria
    I would like to serve multiple sites on one instance. I install nginx, php-fpm, and a rails app. I use sites like this to guide me. I configure php-fpm to listen to a local socket listen = /var/run/php-fpm/php-fpm.sock I configure ngnix with multiple hosts: include /etc/nginx/conf.d/*.conf I have several site php conf files like /etc/nginx/conf.d/site1.conf server { listen 80; server_name site1.com www.site1.com; root /var/www/site1; location / { index index.html index.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name; } } and rails site conf files like upstream rails { server 127.0.0.1:3000; } server { listen 80; server_name site2.com www.site2.com; root /var/www/site2; location / { proxy_pass http://rails; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header Host $host; proxy_set_header X-Url-Scheme $scheme; } } I have a unicorn rails server running via rails s -p 3000 Yet, no sites come up for either site1.com or site2.com. I can get to the rails site at www.site2.com:3000 What is wrong? I've spent 2 days (nearly 30hr) trying many different blogs, SO / SF questions, etc. Please share your insight or answer. edit 1: No log entries are created when I try to visit either site. It's like the requests never come in.

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >